Used Kellenberger Kel-Varia Ur225-1500 1-2-6-7 for sale (1,19,027)

Condition: used, Year of construction: 2002, grinding diameter 450 mm grinding length 1500 mm centre height 225 mm Control FAGOR EQUIPEMENT - T1: grinding wheel diameter 500 mm - T2: grinding wheel diameter 400 mm - T6: HF Fischer spindle MFV or MFZ 1224/1242/1260 - T7: HF Fischer spindle MFV or MFZ 1224/1242/1260 - Marposs tool measurement - active longitudinal positioning - Elaso GAP-control on T1 and T2 contactless integrated in the control surface - Elaso GAP internal grinding with fluid sensor for T6 and T7 - semi-automatic balancing by Elaso integrated in the control surface for T1/T2 - tailstock hydraulic with fine adjustment +/- 150 microns - dresser on workpiece spindle side table mounted - dresser on tailstock side table mounted - dresser on upper table - new service- and userfriendly housing SPECIAL EQUPEMENT: Workhead with direct drive - strongly recommended for non-circular grinding - workpiece weight flying max. 75kg - workpiece weight between centres 150kg - water-cooled B-axis with direct drive - center height 225 mm - extremely torsionally stiff - highly accurate positioning - resolution ° - water-cooled Hydrostatic ball screw - x-axis - wear-free, as there is no contact during operation - no loss of precision, even during long-term use at full load and maximum speed - no friction at low speeds - no friction force backlash when the direction of rotation changes - translates even the smallest rotational movements - no stick-slip effect even at low speeds - no fluctuations in frictional torque due to ball circulation - higher axial stiffness compared to ball screws - significant improvement in damping, resulting in better workpiece surface finish and tool life - no oscillations due to ball circulation - also suitable for high speeds and accelerations - cost-effective alternative to the linear motor with greater precision and significantly lower heat generation - significantly less power dissipation and, as a result, no problems with swarf on permanent magnets New hydraulic unit - optimized temperature control (chiller) - Energy-saving Only one pump controlled by VFD - Pressure monitoring - monitoring of the hydrostatic oil for water content. (Damage to the bellows is recognised and detected prematurely) -fine adjustment +/- 150 microns Paper belt filter 375l – alternative 480l Grinding mist extraction system – emulsion MECHANICAL OVERHAUL -complete machine according to Kellenberger protocoll -new painting Hsdpfx Aeuxfu Nofhjr ELECTRICAL OVERHAUL - new modern Fagor CNC with BEMA HMI - new electric cabinet - new digital drive technology - replacement of all electrical cables, switches etc. - new absolute external scales in x- and z-axis - new absolute encoder (B-axis) Grinding software BEMA-Standard: - workpiece zeroing - grinding wheel zeroing - dressing diamond measuring - corrections - external and internal surface grinding - external and internal angle grinding (turning of the b-axis, dressing with straight wheel) - external and internal radius grinding (radius dressed on wheel) - semi-automatic traverse grinding - workpiece zeroing - 2 dressing diamonds - 1 dressing blade - dressing roll - 3 flat dresser - corrections - Z-position measurement - GAP control Optional grinding cycles at no extra charge: Profile plunge grinding: - external and internal profile plunge grinding with profile wheel Pr...

Condition: used, KELLENBERGER KEL-VARIA R175 x 1500 is a CNC cylindrical grinder engineered for high precision, top accuracy and reliable production. Capacities: centre height 175 mm, distance between centres 1500 mm, Z-axis 1650 mm, workpiece weight on centres max. 150 kg; grinding wheel Ø500×80 mm (bore 203 mm) or Ø400×63 mm (bore 127 mm); max wheel travel 320 mm. Key specs: wheel speeds stepless 1000–2150 rpm (peripheral speed 45 m/s); feed 7500 mm/min; work spindle swivels -10/+100° with 8–800 rpm; permitted load 160 Nm; grinding spindle motor 7.5 kW; work spindle motor 2 kW; 3×400 V 50 Hz; rapid 15 m/min; approx. weight 6000 kg; dimensions 4700×2300×2000 mm; air 6 bar. Accessories: coolant system, paper filtration, MARPOSS touch probe, set of grinding wheels, rotary centre, set of centers, set of workpiece drivers, set of throat gauges, lamp, 2 tool cabinets, tailstock with fine adjustment, oil mist extractor, spindle nose for collets. Achieves tight tolerances; typical applications: automotive, watchmaking, machine tool Hedpfx Afoyxn Itohor

Condition: used, KELLENBERGER KEL‑VARIA R175 x 1500 is a CNC cylindrical grinder engineered for precision, high accuracy and reliable operation. Capacity: centre height 175 mm, distance between centres 1500 mm, Z 1650 mm, max 150 kg; wheels Ø500×80 mm (Ø400×63 mm option). Specs: wheel speeds 1000–2150 rpm, peripheral 45 m/s, max travel 320 mm, feed 7500 mm/min, motors 7.5/2 kW, rapid 15 m/min, 3×400 V, weight ≈6000 kg, dims 4700×2300×2000 mm. Equipment: paper/coolant filtration, MOVOMATIC, Renishaw LP2H probe, wheel flange extractor, remote hand control, MPM balancing. Achieves tight tolerances; suited to automotive, watchmaking, machine tools, aerospace and medical. Hodpfx Ajyxn A Rofhsr

Condition: used, grinding diameter 350 mm grinding length 1500 mm centre height 175 mm Grinding wheel left 500mm diameter Grinding wheel head fix. No swivelling possible. With new control. With new enclosure Hodpfx Afot Ii Rfshjr Overhauled according to Kellenberger protocoll

Condition: used, Year of construction: 2002, grinding diameter 350 mm grinding length 1000 mm centre height 175 mm dimensions of the machine ca. 3,6/3,5 m Photos of identical machine with centre height 225mm Base: Kellenberger Kel-Varia UR175-1000 Kelco 120 Grinding head UR with T1-T2-T3 Basic equipment: -T1 500mm grinding disc diameter -T2 400mm grinding wheel diameter -Infinitely variable, high-resolution axis Hjdpfx Afsuxfucehsr -Marposs measuring device for tool measurement -Active longitudinal positioning -GAP on T1 and T2 from ELASO contactless integrated in the control interface Semi-automatic balancing from ELASO integrated into the control interface -Tailstock with manual retraction -MK5 workpiece headstock with short taper DIN 55026 Belt-driven internal grinding device Options at an extra charge: - New high-precision workhead with torque drive - Internal grinding device for high-frequency spindles diameter 120mm -HF internal grinding spindle Fischer MFM-1224/42/31 D-21 -HF spindle with HSK holder 24,000 rpm with integrated GAP sensor. (delivery time) -CNC-controlled C-axis non-circular grinding -hydrostatic threaded spindle in x -new hydrostatic unit with only 1 pump and pressure accumulator thus better energy efficiency. -monitoring of the water content in the hydrostatic system -Suction system Further options available on request Mechanical overhaul: -Complete machine overhauled according to Kellenberger measurement protocol -New service-friendly cab -repainting Electrical overhaul: -New modern CNC CIRCULAR GRINDING MACHINE control with BEMA rough grinding surface -New control cabinet -New drive technology -Replacement of all electrical cables Berus pressure switches etc. -New absolute glass scales in x and z -New absolute rotary encoder (for B-axis) Control system: The grinding software consists of a basic licence and various options that are possible depending depending on the equipment of the machine. Basic software - External and internal pendulum grinding - External and internal plunge-cut grinding - External and internal pendulum grinding - External and internal plunge-cut grinding - External and internal taper pendulum grinding - External and internal radius grinding, radius dressed on disc - Semi-automatic pendulum grinding - Workpiece zeroing - Grinding wheel zeroing - Measuring the dressing diamonds - 2 moulding diamonds - 1 shaped diamond or dressing roll (dressing roll required) - Moulding roller (dressing roller required) - 3 Flat dresser - Corrections - Z-position measurement (probe required) - GAP probing (grinding device required) OPTIONS at an extra charge: Software profile plunge-cut grinding: - External and internal profile plunge-cut grinding with profile disc Profile grinding software: - External and internal profile grinding with straight disc Software thread grinding: - Single and multi-start external and internal thread grinding with thread on the disc disc Dressing. Dressing of single and multi-groove discs. Flank angle freely selectable. Trapezoidal thread grinding software: - Additional dressing of trapezoidal threads possible External and internal non-circular plunge-cut grinding: - External and internal non-circular plunge-cut grinding Non-circular grinding software: A prerequisite for non-circular grinding is that the workpiece axis is equipped with a high-resolution rotary encoder so th...

Condition: used, grinding diameter 450 mm grinding length 1000 mm centre height 225 mm Fotos von bereits gelieferten Maschinen. Mechanische Überholung: -komplette Maschine nach Kellenberger Messprotokoll überholt -Neue servicefreundliche Kabine -Neulackierung Elektrische Überholung: -FANUC Steuerung mit BLUE-SOLUTION -Neu aufgebauter Schaltschrank -Neue Antriebstechnik -Austausch sämtlicher elektrischer Leitungen Berus Druckschalter etc. -Neue Absolut-Glasmaßstäbe in x- und z Hsdpfozkvucsx Afher -Neuer Absolut Drehgeber (Bei-B-Achse) Fotos von bereits gelieferter Maschine mit anderen Optionen. Schleikopfvariante UR/RS: -Schleifscheibenanordnung für Aussen -und für Schrägeinstichschleifen hintereinander! -Dadurch jeweils 400mm Scheibendurchmesser! -Dadurch wesentlich geringere Kollisionsgefahr -Einfacheres programmieren -Schleifscheibenausrüstung jeweils 400x63x127mm -Einrichtung zum Betrieb einer HF-Spindel -Spindel optional gegen Aufpreis -B-Achse CNC gesteuert zum Aussen-Plan- und Innenschleifen in einer Aufspannung. Schwenkbereich +10°/-270° -C-Achse zum Polygonschleifen -Unterteil fest -Schleifkopfmotor 10,0 KW -Reitstock -Marposs Messsystem zur Schleifscheibenvermessung. -Längspositionierung Marposs

Condition: used, Year of construction: 1995, grinding diameter 350 mm grinding length 1000 mm centre height 175 mm Teilüberholte Maschine mit Messprotokoll nach Neumaschinentoleranz NEUE Steuerung Eckelmann ENC mit BEMA Schleifsoftware KEL-ASSIST für Kelco 90 numerisch gesteuerte B-Achse Innnschleifrinrichtung Dia 80mm Schleifscheibe links Durchmesser 400mm Schleifscheibe rechts Durchmesser 300mm Innenschleifspindel HJN 828 hydraulischer Reitstock Mikroverstellung KEL SET Messsystem Hsdeyatx Sepfx Afhor

Condition: used, Year of construction: 2000, grinding diameter 450 mm grinding length 1000 mm centre height 225 mm Photo outside of the machine of an already delivered one in similar scope. Other fotos from the origin machine. Hodoxzk Nijpfx Afhor -major maintenance -New table geometry -partial painting of the interior grinding wheel equipment LEFT 400x63x127mm (standard) grinding wheel equipment RIGHT 300x40x127mm Internal grinding unit Ø120mm for HF spindles CNC control KELCO 120 C-axis for non-circular grinding. Kel-Poly B-AXIS: CNC-controlled B-axis KELCO 120: v constant 35m/s or 45m/s High-frequency internal grinding spindle Operating unit for MFV and MFZ spindles Hydraulic quill retraction for the tailstock NO micro-adjustment on the tailstock Spring-loaded quill insert Top table cooling Standard workpiece headstock MK 5 DIN 55026 size 5" Micro-adjustment for the standard workhead Dressing device on the lower table Active longitudinal positioning KELPOS, MARPOSS, mounted on the grinding head Tool measuring system KELSET, MARPOSS MARPOSS gate sensor Measuring control MARPOSS Minialsar prepared Paper belt filter

Condition: used, Year of construction: 1999, grinding diameter 350 mm grinding length 1000 mm centre height 175 mm Control FANUC 18i-TA GENERALÜBERHOLT Foto von ähnlicher bereits gelieferter Maschine - Schleifscheibenausrüstung LINKS 500mm - Schleifscheibenausrüstung RECHTS 400mm - Innenschleifeinrichtung 120mm für riemengetriebene Innenschleifspindeln (standard) - CNC-Steuerung FANUC 18i-TA - vorbereitet für Messsteuerung Marposs kombiniert (Minialsar, Positionar)mit E5N - B-Achse - Kel-Set - hydraulischer Pinolenrückzug - Mikroverstellung am Reitstock - Werkstückspindelstock mit schwenkbarem Unterteil - Schleifscheibenausrüstung LINKS 500mm - Schleifscheibenausrüstung RECHTS 400mm - Innenschleifeinrichtung 120mm für riemengetriebene Innenschleifspindeln (standard) - CNC-Steuerung FANUC 18i-TA - vorbereitet für Messsteuerung Marposs kombiniert (Minialsar, Positionar)mit E5N - B-Achse - Kel-Set - hydraulischer Pinolenrückzug - Mikroverstellung am Reitstock - Werkstückspindelstock mit schwenkbarem Unterteil Hedpfxey U N Hpj Afhor

Year of construction: 2004, condition: ready for operation (used), travel distance X-axis: 320 mm, travel distance Z-axis: 1,150 mm, controller manufacturer: HEIDENHAIN, overall weight: 6,000 kg, This KELLENBERGER KEL VARIA RS 175/1000 Grinding machine was manufactured in the year 2004 in Switzerland. It is equipped with a HEIDENHAIN control unit. Hedpfx Ajyi Elijfher Machine Benefits Qualitative Machine Benefits • Good condition Technical Machine Benefits • Distance between centres: 1000 mm • Centre height: 175 mm • Grinding wheel dimensions right Ø 400 x 50 mm • Grinding wheel head movements -210°/+30° • Rotational speed 8-800 rpm • Spindle type cm5

Condition: used, grinding diameter 350 mm grinding length 1000 mm centre height 175 mm dimensions of the machine ca. 3,6/3,5 m As the world’s leading company in Kellenberger overhaul and retrofit we are not only able to deliver machines in a quality similar to a new machine and with warranty, but we can also offer you the service for your is: Kellenberger Kel-Varia Baureihe mit Kelco 90 Steuerung. Mechanische Überholung: -komplette Maschine nach Kellenberger Messprotokoll überholt -Neue servicefreundliche Kabine -Neulackierung Elektrische Überholung: -Neue moderne CNC-RUNDSCHLEIFMASCHINEN-Steuerung -Neu aufgebauter Schaltschrank -Neue Antriebstechnik -Austausch sämtlicher elektrischer Leitungen Berus Druckschalter etc. -Neue Absolut-Glasmaßstäbe in x- und z -Neuer Absolut Drehgeber (Bei-B-Achse) Standardausstattung: -WSS mit Konus MK5, optional mit Adapter MK5/Kurzkegel -RST mit MK4 Konus. Optional mit Feinverstellung -Schleifspindelstock T1/T2/T3 -T1 Schleifscheibendurchmesser 400mm -T2 Schleifscheibendurchmesser 300mm -T3 Innenschleifeinrichtung riemengetrieben. -Schleifspindelmotor 4,4kW -B-Achse hochauflösend -Marposs Messsystem zur Schleifscheibenvermessung. -Längspositionierung Marposs -GAP Control (Sensor am Schleifspindelstock) Optionen gegen Aufpreis: -HF Innenschleifspindel -Hochgenauer, höchst kippsteifer Werkstückspindelstock -Messteuerung Die Werkzeugmaschine entspricht zum derzeitigen Zeitpunkt nicht den grundlegenden Sicherheits- und Schutzanforderungen wie in der BetrSichV 2015 genannt. Hsdjuwv H Hopfx Afhor Eine Anhebung des erforderlichen Mindest-Schutzzieles ist mittels einer Gefährdungsbeurteilung nach BetrSichV zu ermitteln.

Condition: used, Year of construction: 1995, grinding diameter 350 mm grinding length 1000 mm centre height 175 mm Completely overhauled in 2013 Heavy duty workpiece headstock tailstock Without chuck and without bezel in the photo Kelco 90 control Hjdjxyadaspfx Afher The machine can be viewed in operation at the customer's premises from 2025 up to and including January 2026.

Condition: used, grinding diameter 350 mm grinding length 1500 mm centre height 175 mm 500mm grinding wheel diameter New servomotors in x and for the workhead. Photo of already delivered machine in UR equipment. -Operation via the touch panel is extremely simple. -The symbols on the control panel are practically identical to the original original control system, so there is no need for training. -Diagnostic function with display of PLC information and digital I/O -Dressing function can be extended or changed at the customer's request. -Oriented spindle stop of the workpiece spindle possible on request. -New maximum infeed of 40 mm can be extended on request. -Digital display in 2 axes. Resolution x-axis 0.5my Options: -Rotary encoder with digital display in the workpiece headstock -Rotary encoder with digital display in the grinding headstock (no height adjustment with spindle possible) Hodpsuwv Idsfx Afhjr with spindle possible) -Increase of the center height to max. 225mm -Speed control for the grinding spindle Translated with (free version)

Condition: used, grinding diameter 350 mm grinding length 1500 mm centre height 175 mm grinding wheel diameter 400 mm grinding wheel width 50 mm bore 127 mm MK5 work piece spindle speed 20-400 U/min grinding head swivelling 360 ° grinding spindle head - swivable 180 + - ° grinding spindle speed 1500,1700,2200 U/min 0-40 mm/Ø 0-40 mm/Ø ±6,5 ° longitudinal feed of the table 1530 mm table speeds 0,02-6 m/min 130 kg 130 inkl. Spannung kg cross travel max. 270 mm 80 mm tailstock quill taper MT 3 quill travel 30 mm total power requirement 6,5 kW weight of the machine ca. 3,05 t dimensions of the machine ca. 4 x 2 m Overhauled according to Kellenberger guidelines including new, modern and future-proof control system. Hedpfxjuxftre Afhjr Photo of machine already delivered with special options -Operation via the touch panel is extremely simple. -The symbols on the control panel are practically identical to the original original control system, so there is no need for familiarisation. -Diagnostic function with display of PLC messages and digital I/O -Dressing function can be extended or changed at the customer's request. -Orientated spindle stop of the workpiece spindle possible on request. -New maximum infeed of 40 mm can be extended on request. -Digital display in 2 axes. Resolution x-axis 0.5my Options: -Encoder with digital display in the workpiece headstock -Rotary encoder with digital display in the grinding headstock (no height adjustment with spindle possible) with spindle possible) -New stable internal grinding device diameter 80mm or 100mm with height adjustment. -Increase of the centre height to max. 225mm -Speed control for the grinding spindle Included: -Operating tool -Clamping tube for chuck Further accessories on request. The x-axis of the machine has an electronically controlled infeed system with stepper motor drive. Hydraulic longitudinal and rapid traverse table movement. Versatile application in production for external cylindrical and internal internal grinding or for external, face and internal grinding in one clamping clamping of individual parts. Possible options: -Semi-automatic dressing cycles for external and internal grinding -automatic dressing compensation. -Measuring control

Condition: reconditioned (used), KELLENBERGER KEL-VISTA UR 175X600 is a CNC cylindrical grinder engineered for precision, high accuracy and reliability. Capacity: centre height 175 mm; between centres 800 mm; grinding length 600 mm; max Ø 349 mm; max weight 100 kg. Key specs: Z 750 mm; X 320 mm; left wheel Ø400×80×127, right Ø300×40×127; wheel speeds 875–1900 rpm (stepless); wheel motor 5 kW; work spindle 8–800 rpm (stepless), taper 5 CM; rapid 12 m/min; air 6 bar; 3×400 V 50 Hz; machine ≈3000 kg; 3200×1700×2000 mm. Accessories: coolant, coolant-through-spindle (IKZ), paper filter, MARPOSS probe, MOVOMATIC measuring control, internal grinding attachment, balancing, RS‑232. Suited for tight tolerances in automotive, watchmaking, machine tools, aerospace, medical. Hodpfxoyxn Iys Afher

Condition: new, INA MHA260-0-0-1-1-4-1088-01,0M-7-1 angular measurement system, serial number as shown in the photo, unused in opened original packaging, 100% functional, scope of delivery as shown in the photos. Hjdpfx Afei Ea Uyohor

Condition: new, INA MHA260-0-0-1-1-4-1088-01,0M-7-1 angle measuring system, serial number as shown in the photo, unused in opened original packaging, 100% functional, scope of delivery as per photos. Hedpfx Afei Ea Uvshjr

Condition: new, INA MHA260-0-0-1-1-4-1088-01,0M-7-1 angular measuring system, serial number as shown in the photo, unused in opened original packaging, 100% functional, scope of delivery as shown in the photos. Hodpfx Aoi Ea U Dsfhsr

Condition: new, functionality: fully functional, machine/vehicle number: NEW-21, empty load weight: 462 kg, maximum load weight: 1,038 kg, overall weight: 1,500 kg, axle configuration: 1 axle, loading space length: 2,760 mm, loading space width: 150 mm, loading space height: 300 mm, maximum speed: 100 km/h, trailer brake: trailer braked, Year of construction: 2026, SARIS K1 276 150 1500 1 Internal dimensions: 276cm x 150cm Side wall height: 30cm Loading height: 67cm Gross weight: 1500kg Payload: 1059kg Braked single-axle trailer Overrun brake and handbrake by AL-KO 1500kg axle with brake and cooling fins Low chassis Fully welded, hot-dip galvanized steel frame Aluminium profile side walls with tension locks Sides folding and removable on all sides 15mm thick, anti-slip and robust phenolic plywood flooring Additional steel plate on wooden floor Automatic jockey wheel with 400kg support load 6 noise-reducing lashing eyes with 800kg tensile strength Reinforced 13" C-grade tyres with steel valve M+S tires Net/rope hooks on frame 13-pin plug LED marker lights at the front Rear lights with reversing light, rear fog and triangular reflectors Upper frame mounted on rubber bushings Large tipping angle of 41 degrees to the rear Hand pump with adjustable handle OPTIONAL ACCESSORIES PERMANENTLY REDUCED IN PRICE FROM FEBRUARY 2026 -100km/h equipment (shock absorbers) -Spare wheel with holder -Without side walls (discounted price) -Increased side wall height to 35cm -Black Edition (black powder-coated side walls and rims) -Ramp rails -U-profile for attaching the original SARIS ramp rail -Electric tipping control -Remote control -Bluetooth remote control -Emergency hand pump in combination with electric control -Safety prop for maintenance work on tilted vehicle -Complete LED lighting -Anti-theft device -Fine or coarse mesh net -H-frame -Mesh side extensions in various heights, also closed -Additional 30cm side walls with tension lock -Flat cover with or without bars Hedpfjrk Iybox Afher -High cover 160cm or 180cm Further accessories available on request! Plus freight to Gera and vehicle registration documents: €200 net Images are for illustrative purposes only and may show accessories at extra cost. Have you not yet found the right trailer? We permanently have 50–100 units in stock, ready for immediate collection. Workshop open weekdays from 8:00 a.m. to 5:00 p.m. for all types of repairs. Specialist in axle repairs, including for caravans. Large selection of rental trailers. Additionally, we have a wide range of spare parts and accessories for trailers from all manufacturers. Get expert advice by phone, visit our website or drop by in person.

Condition: new, machine/vehicle number: NEW-7, empty load weight: 326 kg, maximum load weight: 1,174 kg, overall weight: 1,500 kg, axle configuration: 1 axle, loading space length: 2,760 mm, loading space width: 1,500 mm, loading space height: 300 mm, suspension: other, tire size: 195 / 50 R 13, maximum speed: 100 km/h, color: silver, trailer brake: trailer braked, Year of construction: 2026, brakes: other, SARIS PL 276 150 1500 1 Internal dimensions: 276cm x 150cm Side board height: 30cm Loading platform height: 66cm Total weight: 1500Kg Payload: 1174Kg Braked single-axle trailer Overrun brake and handbrake by AL-KO Large 1500Kg brake with cooling fins Low chassis Fully welded, hot-dip galvanized steel frame Aluminum profile sideboards with tensioning latch Can be folded down and removed on all sides 15mm thick, non-slip, and robust screen-printed plywood floor Automatic support wheel with 400Kg support load 8 noise-reducing tie-down points with 800Kg tensile force Reinforced 13" C tire with steel valve M+S tires Net/rope hook on the frame 13-pin connector LED side marker lights at the front Rear lights with reversing light and triangular reflector Optional accessories: -Equipment for 100km/h (shock absorbers) -Spare wheel with holder -Without sideboards (price reduction) Hsdsghpczopfx Afhor -Sideboard height increased to 35cm -Black Edition (Powder-coated sideboards and rims in black) -Ramps -Steel plate on the floor -Complete LED lighting -Theft protection -Net with fine or coarse mesh -H-frame -Leaf grid in various heights, also closed -Extension sideboards 30cm with tensioning latch -Flat cover with or without rails -High cover 160cm or 180cm More accessories available on request! Plus freight to Gera and vehicle registration document 200 € net Images are for illustration purposes only and may show optional accessories at an extra cost. Haven't found the right trailer yet? We have 50-100 vehicles in stock and available for immediate pickup. The workshop is open on weekdays from 8:00 AM to 5:00 PM for all types of repairs. Specialist in axle repair, including for caravans. Wide range of trailer rentals. Hnobqeghpbyeupd Nfoh We also have a large selection of spare parts and accessories for trailers of all manufacturers. Get advice by phone, visit our website, or come by directly.

Condition: used, Technical details: floor-plate length: 2000 mm plate width: 1500 mm plate height: 820 mm Plate thickness: 185 mm weight of the machine ca.: ca. 2,1 / 2,2 pro Platte t transport dimensions LxWxH: ca. 2,0 x 1,5 / pro Platte m There are 6 of these clamping plates for sale. (price per piece) Material cast steel/profile casting Hedpfx Aeu N D Rdofhor T-slots according to DIN 650: a=43; h=105; b=76; c=50 mm; center distance 375 mm 4x passage holes Ø 90 mm 10x fixing holes Ø 25 mm with countersink Ø 85 x 135 mm with base frame for shelf no. 1+3+4+5+6: L: 1990 mm x W: 1490 mm x H: 185 mm with base frame for panel no. 2: L: 2020 mm x W: 1515 mm x H: 520 mm *

Condition: used, TECHNICAL DETAILS - Distance between centers : 600 [mm] - center height : 125 [mm] - Table orientation : 11 [°] GRINDING WHEEL HOLDER HEADSTOCK - Left grinding wheels dimensions : 400 x 50 x 127 [mm] - Power : 3 [kW] Hjdpfx Afszf Rcdehor - Spindle speeds : 1500 / 1700 / 2200 [rpm] - Orientation of grinding wheel holder headstock : 270 [°] PART-HOLDER HEADSTOCK - Orientation of part holder headstock : 360 [°] - Spindle speeds : 20 - 400 [rpm] - Spindle internal cone : Morse 5 - Power : 0.9 [kW] TAILSTOCK - Internal cone : MT4 - Quill stroke : 30 [mm] POWER SUPPLY - Supply voltage : 380 [V] WEIGHT & DIMENSIONS - Machine floor space : 2580 x 1680 [mm] - Machine height : 1670 [mm] - Machine weight : 2200 [kg] EQUIPMENT - Coolant tank * with paper filtering unit - 1 internal grinding spindle - Lubricating tank with pump - 1 three-key steady rest - 1 inner spindle alignment device

Condition: used, functionality: fully functional, Kellenberger cylindrical grinding machine in very good condition. Available at a favorable price. Price significantly reduced !!!!! Hodjw Dy Rqspfx Afhsr

Condition: excellent (used), Year of construction: 1997, grinding diameter 80 - 250 mm grinding length 600 mm centre height 175 mm longitudinal feed 750 mm Hodpfsyb S Rcox Afhor workpiece turning speeds 6 - 600 U/min grinding spindle speed 1500 - 3600 U/min cross movement - autom. and by hand 320 mm Control Kelco 80 weight of the machine ca. 4,4 t dimensions of the machine ca. 3,1 x 2,1 x 2,0 m

Condition: excellent (used), Year of construction: 2004, functionality: fully functional, center height: 175 mm, workpiece weight (max.): 180 kg, grinding length: 1,000 mm, grinding wheel diameter: 400 mm, total length: 1,150 mm, grinding diameter: 349 mm, The machine is in working and usable condition in our workplace. There are 2 outer diameter and 2 inner grinding machines, it has a C axis. Hjdpov Uxriofx Afhjr