PORTAL PLANNING MACHINE

TOS 3000

Condition: used, total length: 4,500 mm, total width: 1,600 mm, total height: 1,500 mm, Colour: Grey Empty weight: 5.000 kg Price: On request - Documentation available: No - CE certificate present: No Ndodpfx Aox Ryv Toiysa - Serial number: 0440922 - Drive system: Conventional - Power [kW]: 18.5 - Centre height [mm]: 315 - Swing over bed [mm]: 630 - Carriage turning diameter [mm]: 400 - Distance between centres [mm]: 3000 - Bed width [mm]: 580 - Spindle bore [mm]: 82 - Min. spindle speed [rpm]: 9 - Max. spindle speed [rpm]: 1120 - Options: Three-jaw chuck, Four-jaw chuck - Transport dimensions: 4500mm x 1600mm x 1500mm (l x w x h) - Transport weight [kg]: 5000kg - Transport packages [pcs.]: 1 Financial information VAT: The price shown is exclusive of VAT VAT/margin: VAT deductible for entrepreneurs Delivery and trade-in always possible for everything in the industrial sectors Lukas van Rossum

Condition: refurbished (used), functionality: fully functional, Year of construction: 2007, DAVI_MCB 3060 WT 4-roll plate bending machine CNC _ 3000x65 MM - Year of make 2007 Capacity plate width 3100 mm Plate thickness 65 mm Prebend 55 mm TOP ROLL 600 MM LOWER ROLL 550 MM Configuration installed: • Surface hardening of the four rolls • Dual pre-pinch, with adjustable force upon the input of plate thickness • Conical bending hydraulic attachment - hardened contrast pad. Njdpfjy D Npijx Aiysda • Power driven rolls rotation top/bottom gearbox axial direct drive hydraulic each roll. • Calibration system for re-rolling of welded shells rounding. • Console electric independent with centralized commands joysticks and CNC screen readout. • CNC controller DAVI GENIUS semiautomatic and fully automatic programmable. with digital readout of the 4rollers for use in manual operation, • Opening front side hydraulic drop-end to unload closed shells. • Variable working speed step-less axis interpolation. • Safety installation with emergency stop. • Instruction manuals for operation and service Voltage electric 3phase Vac 380/50 power Kw 75 nr.1 top support hydraulic operated , shell ID max 5 mtrs - CNC programmable nr.1 side support hydraulic on the left nr.1 side support hydraulic on the right, finger pusher to swing the sheet plate forming cones rolling.

Condition: as good as new (ex-display), Year of construction: 2025, functionality: fully functional, Demonstration machine BUB 50/3000 CNC Control system: Siemens One Digital axis drives Includes extensive application software Includes electronic handwheel for X/Z axis Nodpfx Aiov N D Hbsyoda Center height: 400 mm Distance between centers: 3000 mm Weight between centers: 500 kg Z-axis travel: 3250 mm Positioning accuracy X-axis: 0.001 mm Tool holder for workpiece spindle: MK 5 Tool holder for tailstock: MK5 Drive power: - Grinding spindle: 11 kW - Workpiece spindle: 2.5 kW - Total installed: 22 kW Machine design with full enclosure Preparation for dust extraction system included Separate screen, touch probe control, automatic balancing and gap/crash control included. 1 grinding wheel: 508 x 80 x 203.2 mm Immediately available. Optional filter system available in various designs.

Condition: used, operating hours: 11,562 h, total height: 1,900 mm, total length: 5,600 mm, total width: 2,000 mm, Empty weight: 8.500 kg Price: On request - Documentation available: No - CE certificate present: No - Operating hours: 11562 - Drive system: Conventional - Power [kW]: 30.0 - Centre height [mm]: 500 - Swing over bed [mm]: 1000 - Distance between centres [mm]: 3000 - Spindle bore [mm]: 105 - Min. spindle speed [rpm]: 2.24 - Max. spindle speed [rpm]: 450 - Transport dimensions: 5600mm x 2000mm x 1900mm (l x w x h) - Transport weight [kg]: 8500kg Financial information VAT: The price shown is exclusive of VAT VAT/margin: VAT deductible for entrepreneurs Delivery and trade-in always possible for everything in the industrial sectors Lukas van Rossum Nsdewp H Efopfx Aiyjda

Year of construction: 2012, condition: used, max. wheel diameter 180 mm gear width ca. 220 mm max. module 3 / 5 mm Control Siemens 840D sl max. radial velocity 5000 mm/min max. workpiece diameter 180 mm table rotation speed 800 U/min table diameter 145 mm axial travel 250 mm mm axial travel 300 mm clamping force max. 13 kN swivelable +/- 45 ° drive capacity 23 kW turning speeds 6000 U/min diameter of tools max. 90 mm tool clamping length max. 211 mm module hobbing max. 3 module profile milling max. 5 tangential speed max. 7500 mm/min weight of the machine ca. 9,5 t dimensions of the machine ca. 4,5 x 3,5 x 2,7 m Equipment / Accessories: - The machine is equipped for dry milling. - workpiece magazine - parallel gripper: - workpiece weight form-fit max. 15 kg Ndedpfxsymf Das Aiyja - workpiece length max. 400 mm

Condition: new, Year of construction: 2026, functionality: fully functional, machine/vehicle number: 0000025, center height: 3,15,425 mm, workpiece weight (max.): 3,000 kg, grinding length: 3,000 mm, grinding wheel diameter: 750 mm, total width: 2,700 mm, total length: 11,000 mm, total height: 2,200 mm, grinding diameter: 6,30,850 mm, workpiece weight between centers: 3,000 g, distance between centers: 3,000 mm, grinding wheel width: 100 mm, feed length Z-axis: 3,300 mm, grinding spindle speed: 1,000 rpm, overall weight: 17,000 kg, rotational speed (min.): 2 rpm, rotational speed (max.): 250 rpm, warranty duration: 24 months, rapid traverse X-axis: 3 m/min, rapid traverse Z-axis: 6 m/min, input voltage: 400 V, workpiece spindle speed (max.): 250 rpm, Equipment: rotational speed infinitely variable, Cylindrical grinding machine BUC63/3000 CNC new in 100% condition with Sinumerik ONE control system, or INTRONIX TOS CNC. Njdpfxsu U Ewgo Aiyjda It is possible to expand with additional equipment for superfinishing SUPFINA, or for grooving equipment for rubber or plastic rollers.

Condition: good (used), Year of construction: 1984, Used TOS KAMENICEK model BUC63A x 3000 Universal cylindrical grinding machine. YEAR OF MANUFACTURE: 1984. MACHINE FORMERLY INSTALLED AT ROLLS ROYCE PLC IN DERBY UK. IMMEDIATELY FOR SALE AND NOW LOCATED IN BELGUIM WHERE IT CAN BE INSPECTED. SPECIFICATION Max Swing 630 mm Distance between centres 3000 mm Workhead swivel – towards wheelhead only 90 deg. mm Work spindle bored taper No. 6 M.T. Length of stroke of tailstock barrel 70 mm Njdpfx Ajh U Rznoiyoda Tailstock barrel taper No. 6 M.T. Spindle nose clamping Din 55021 Swivelling of wheelhead + 30 deg – 10 deg Length of adjustment by re-circulating ball screw 290 mm Additional length of adjustment 250 mm Length of rapid feed 90 mm Length of infeed setting per each rev. of handwheel, measured on work diameter 0.5 mm Grinding wheel dia. X width X bore 750 x 80 x 305 mm Min. dia. of worn grinding wheel 570 mm Max. face width of grinding wheel 125 mm Rate of table traverse – steplessly variable 0.5-0.6 m/min Table traverse per 1 rev of handwheel 8 mm Swivelling of table +/- 5 deg. Max. permissible weight of work between centres 2500 kg Max. permissible weight of workpiece in chuck with overhang. (including weight of chuck) 150 kg Wheel spindle speeds (2) 840,970 rpm Grinding wheel surface speed 33 m/sec Work spindle speeds – int. var. in 2 ranges 8-50, 50-315 rpm Drive – total power required rated 31 kva Output of workhead motor 3 kw Output of wheelhead motor Electrics 15 kw 415V ,3Ph,50Hz Equipped with:- Additional wheel flanges, coolant system with clarifier and splash guards. FEATURES AND EQUIPMENT – Swivel Round Internal Grinding Attachment

Year of construction: 2012, condition: excellent (used), Used Ras 62.25 CNC Folder Model: 62.25 Ras Year 2012 Ndsdpjn Tnzfjfx Aiyoa RAS 62.25 CNC folder Capacity: 2540mm x 2.5mm CNC Auto Bending Machine (Year 2012) Complete with fitted System 6000 Touch screen control (screen recently replaced) 3.2 Metre J shape back gauge Twin Foot Pedal Control MACHINE GUARD SOLUTIONS Light Guards Complete with segmented and straight tools

Condition: excellent (used), control: Heidenhain Positip 850; tool taper: SK 40; hydr. clamping; stroke: 100 mm; table: 800x480 mm travel: x-600 mm, y-400 mm, z-400 mm rapid motion Nedpslkgvbsfx Aiyeda feed: 63-800 mm/min (18 steps) spindle speed: 63-3150 rpm (18 steps) accessories: coolant equipment, collet chuck incl chucks

Condition: used, MAZAK QT 20 Model: OT-20-N-K Njdjwulzvopfx Aiyeda Turret: 8 positions Motor: 18.5 kW Year: 1988 Weight: 11,700 lbs Chuck: diameter 250 renewed operational panel