Used Reel-Director Combination for sale (4,841)

Condition: good (used), Year of construction: 1999, Lg 33922 Unwinding and guiding unit SOPREM BRH 7-200-80U-1250 BAP Bledpfx Ajhuwacof Ajn Web width: max. 200 mm Coil weight: max. 1,250 kg Spreading range: approx. 380 to 430 mm Coil outer diameter: max. 1,300 mm Web thickness: approx. 0.8 to 3 mm Working direction: from right to left

Condition: used, Year of construction: 2016, operating hours: 30,000 h, functionality: fully functional, machine/vehicle number: 2212725, type of input current: three-phase, power: 1,999 kW (2,717.88 HP), input voltage: 400 V, control cabinet width: 800 mm, control cabinet length: 3,000 mm, control cabinet height: 2,400 mm, rotational speed (min.): 1,500 rpm, rotational speed (max.): 1,500 rpm, total height: 3,200 mm, total length: 16,000 mm, total width: 3,200 mm, fuel: domestic gas H, overall weight: 45,000 kg, type of cooling: water, nominal power: 1,999 kW (2,717.88 HP), nominal power (apparent): 2,000 kVA, input frequency: 50 Hz, input current: 250 A, Equipment: documentation/manual, The CHP unit is used in the horticultural operation to supply electricity. It can operate in parallel with the grid or in island mode. It is maintained by the manufacturer under a full-service contract. It is in good condition and fully functional. The container is spacious and very comfortable for service work. The generator is connected to the circuit breaker via a copper busbar system, ensuring high quality. The container temperature is controlled automatically via electric sunshades. The switch room is heated and air-conditioned. An EMI box is installed for continuous NOx measurement. A 15-meter chimney is located on the roof. A ladder for exhaust gas measurement is included. The unit is sold “as is” for pickup at the premises. The sale is due to a change to wind power generation. The service contract, valid up to 60,000 operating hours, can be taken over if desired and possible. It is a perfectly designed container, extremely spacious and solidly built! It is intended to remain in operation until December 1, 2026. If necessary, it can also be dismantled immediately. We would be happy to arrange a viewing and demonstrate its operation. Bjdpez D Ihfofx Af Aoln

Condition: ready for operation (used), functionality: fully functional, Year of construction: 2017, operating hours: 1,706 h, power: 366 kW (497.62 HP), gearing type: hydrostat, fuel type: diesel, maximum speed: 30 km/h, first registration: 07/2017, next inspection (TÜV): 07/2026, rear tire size: 500/85 R24, machine/vehicle number: YHG233775, Equipment: air conditioning, cabin, hydraulics, lighting, rape cutter, trailer coupling, On behalf of an authorized party, we are offering the following used item for sale: Case-IH combine harvester AF 7240 with ST rotor Chassis number: YHG233775 Longitudinally arranged ST rotor 30 km/h version 6-cylinder Power: 366 kW (497 hp) Front wheels: Track drive, sprung, 610mm Bodpfx Ajzabtdjf Asln Rear wheels: 500/85 R24 HID work light package AC FAN automatic fan speed adjustment Adjustable discharge spout Cross-flow transverse flow fan Hydraulic drive Redekop chopper Xtra Chop Accu Guide complete Steering on Egnos – retrofitted with existing RTK antenna LED work light package, 4 x rear, 1 x grain tank inlet Additional cameras Yield and moisture measurement Radio, two-way radio Last inspection before the 2025 harvest, approximately 300 ha Minor scorching above the tank, damaged cables have been repaired Header 9.15 m, Series 3050, steplessly adjustable Type: 306 Year: 2017 Serial number: 868112015 Hydrostatic reel drive Automatic adjustment of reel speed Reel horizontal adjustment Hydraulic multi-quick coupler Short stubble divider Hydraulic rapeseed knife Rabolon ear lifter Header wagon TAM Leguan quattro 30 Type: SWW 30FT VIN: WEGTP28F3HAAA3318 Year: 2018 2-axle 25 km/h LED lighting set Tires: 10.0/75-15.3 Price upon collection. The item is located in 49419 Wagenfeld-Ströhen and must be collected from there by the buyer. This offer refers exclusively to the described item. Other items that may be shown here are possibly part of a different offer. Errors and omissions excepted. Inventory number: 2926-26

Condition: new, Year of construction: 2022, functionality: fully functional, type of input current: three-phase, power: 50 kW (67.98 HP), input voltage: 400 V, fuel: domestic gas H, overall weight: 2,200 kg, nominal power: 50 kW (67.98 HP), input frequency: 50 Hz, continuous power: 50 kW (67.98 HP), input current: 72 A, Equipment: documentation/manual, For sale: new and unused 2G g box 50plus combined heat and power (CHP) unit from 2022. This is a 2G Energietechnik g box 50plus, configuration as70 4, suitable for simultaneous generation of electricity and heat using natural gas. The unit has never been put into operation and is in new condition. At full load, the CHP unit delivers 50 kW of electrical power and approximately 104 kW of thermal power. The unit is designed for 400 V and 50 Hz and is equipped with a Liebherr G924 natural gas engine and a Leroy Somer LSAH 44.3 generator. Bodpfx Ajz Hngmof Ajln Technical specifications: • Manufacturer: 2G Energietechnik GmbH • Type: g box 50plus • Configuration: as70 4 • ID number: H1214 • Year of manufacture: 2022 • Electrical power: 50 kW • Thermal power: approximately 104 kW • Rated voltage: 400 V • Rated frequency: 50 Hz • Rated current: 72 A • Weight of CHP module: approximately 2,200 kg • Fuel: natural gas • Electrical efficiency: approximately 34.5 percent • Thermal efficiency: approximately 71.8 percent • NOx emissions: less than 125 mg per Nm³ • Sound pressure level of CHP: approximately 55 dB(A) at 1 meter The offered package consists not only of the CHP module. The installation also includes two Viessmann boiler bodies, one Viessmann Proflame VM IV 3 gas burner, a separate control cabinet, and various flue gas components, fittings, and related documentation. The original new price of the complete installation was approximately €189,000. The installation comes from a project for which it was ultimately not used. The various main components are from 2022 and have been stored without being put into operation. Due to the size and composition of the installation, we advise interested parties to contact us in advance for further technical information, photos, documentation, and an overview of the components available. An inspection is, of course, possible (location: Winterswijk, Netherlands). Loading onto the buyer's transport vehicle is possible on site.

Condition: used, functionality: fully functional, machine/vehicle number: 34140, mileage: 10,900 km, power: 315 kW (428.28 HP), first registration: 09/2024, fuel type: diesel, overall weight: 26,000 kg, axle configuration: 6x2, fuel: diesel, color: orange, driver cabin: day cab, gearing type: semi-automatic, emission class: euro6e, suspension: steel-air, loading space volume: 13.5 m³, Equipment: ABS, airbag, cruise control, electronic stability program (ESP), power assisted steering, seat heater, traction control, truck registration, The mileage of the offered vehicles may vary, as some vehicles are currently in rental use! Bledjz Hm I Nepfx Af Ajn Further comparable vehicles are available upon request. Chassis design for ADR, ADR type class FL including EX/II, EX/III and AT, weight variant 27 t, engine OM470, regulated water pump, disc brakes, Active Brake Assist, ABS, ASR, ESP, lane keeping assist, attention assist, traffic sign assist, tire pressure control, front guard assist, radar on the side, starting assist, reinforced front axle 9 t 3-leaf, air-sprung rear axle, rear axle 13 t with differential lock, steerable and liftable 9 t trailing axle, daytime running lights, rain sensor, light sensor, AHK Ringfeder (D40), tires: front axle 385/65R22.5, rear axles 315/80R22.5 Cab color is white, M-cab ClassicSpace (width 2300 mm, tunnel 320 mm), driver's comfort suspension seat, co-driver's functional seat, multimedia cockpit, tinted windshield, sunroof, heated mirrors electrically adjustable, electric windows, comfort locking system with central locking, multifunction steering wheel, multimedia radio touch with Bluetooth and navigation, digital tachograph VDO, trip computer, pre-installation for alcohol tester, 12/24 V sockets in the co-driver's footwell, circuit breaker, battery main switch, pre-installation for toll collection, air conditioning, cruise control, speed limiter, waste heat recovery, compressed air connection in the cab, reversing camera, 2 rotating beacon lights on the cab roof, sun visor Equipment and design according to ADR (tank code: L4BH); total tank volume 13.5 m³; closing bottom covering the entire cross-section of the tank, opening upwards with 2 hydraulic cylinders; lid locking with tension claws, hammer head screws and linkage in galvanized design; centrally operated via a pneumatic cylinder, level indicator with 2 internal floats and external scale calibrated in 500 l increments for each piston position, discharge apron made of aluminum, emptying via pneumatically operated piston, piston with manhole DN 450 mm; 3-way adjustable piston with water/sludge volume division: position 1: approx. 10.3/3.2 // position 2: approx. 8.5/5.2 // position 3: approx. 6.5/6.5; vacuum pump: CVS VacuStar 1600L (1,550 m³/h at 400 mbar) water-cooled and mechanically driven, lower and upper suction and discharge connection DN 100 with TW coupling and blind cover pneumatically operated, suction connection for trailer operation at the rear left, suction hose cassette with simultaneous telescopic boom DN 125: the boom arm is hydraulically extendable up to 1,850 mm and hydraulically liftable up to 4,600 mm above the ground and can be swiveled 180°, either together with the high-pressure hose reel or independently of the high-pressure hose reel, incl. suction pipe approx. 800 mm long DN 125 mm and a Perrot M coupling, sludge water drain DN 80 for pushing the dirty water back into the sewer via the boom, HD pump URACA KD 718G (333 l/min at 170 bar) mechanically driven, large HD hose reel hydraulically swiveling 180° and hydraulically driven with sewer flushing hose DN 25 approx. 180 m long; small hose reel hydraulically driven with 60 m HD hose DN 13 mm and spray gun, rotating beacon, removable halogen work light with 20 m cable, ambient lighting with 4 LED spotlights switchable from the operating platform, operating platform mounted at the rear right on the superstructure as well as on the high-pressure hose reel made of stainless steel with louvers, remote control.

Condition: excellent (used), Year of construction: 2019, machine/vehicle number: SO-22949/1/19, REF: MM6218 1 X Sparc Systems 8-lane linear weighing combination system. Technical specification⚙️ ✅ Manufacturer - Sparc Systems Ltd. ✅ Model - LCWS. ✅ Overall dimensions - 1620mm long x 920mm wide x 1620mm high. Note 🗒️ Seller has a quote for service and getting production-ready at cost of £12-15k per unit. Blodpoxd Thmsfx Af Aen

Condition: excellent (used), Year of construction: 1996, functionality: fully functional, Format panel saw, milling machine, combination machine, table saw, circular saw, joiner’s circular saw, format saw, panel saw, table milling machine, tilting spindle milling machine FELDER Type: KF7 Year of manufacture: 1996 Format sliding table 300 cm Manual height adjustment of the saw blade Manual tilting of the saw blade up to 45° Parallel fence with fine adjustment up to approx. 125 cm Extension table with telescopic extension arm Rip fence extendable up to approx. 320 cm, adjustable for miter cuts with degree scale system Parallelogram protective device with upper extraction hood Motor power saw motor 3 KW Bodpfx Afoz Eft Ie Asln Tilting spindle milling machine Manual height adjustment of the tilting spindle Manual tilting of the milling spindle up to 45° backwards Milling spindle diameter 30 mm 3 speeds adjustable via belt Milling spindle can be lowered and removed under the table Motor power milling unit 3 KW Milling fence with fine adjustment Folding device for feed A prior inspection is highly recommended; simply leave your phone number in an email, and I will contact you to arrange an inspection appointment. Subject to prior sale. All information without guarantee. The machines can be picked up by the buyer or shipped via a freight forwarder at the buyer's expense. Loading or packaging can be organized by us. The shipping costs are an estimate; they may vary depending on the distance and unloading options; please inquire. The offered item is offered with differential taxation. The stated selling price is the gross final price. An invoice with VAT breakdown will not be issued. You will receive an invoice in accordance with §25 UStG. Warranty basis: Due to age and wear, the sale is exclusively to commercial customers without any warranty, guarantee, or right of return. All information without guarantee. The buyer acknowledges this by submitting their bid. If the offered item is a used item, the warranty period is 12 months if the buyer acts as a consumer within the meaning of §13 BGB. If the buyer acts as an entrepreneur within the meaning of §14 BGB, any warranty is excluded. If the offered item is a new item, the warranty period is 24 months if the buyer acts as a consumer within the meaning of §13 BGB. If the buyer acts as an entrepreneur within the meaning of §14 BGB, the warranty period is 12 months.

Condition: good (used), Year of construction: 2002, For sale is a used Holzprofi circular saw and milling machine with a cutting length of 2500 mm. The machine has been inspected and refurbished by our service team and is in good condition. Technical specifications: Bsdpez Apgisfx Af Ajln - Cutting length 2500 mm - Cutting width 1200 mm - Cutting height 90 mm - 3 milling speeds - Height-adjustable + swiveling - Dust extraction port Ø 100/80 mm - 2 motors, each 4.4 kW / 6 HP - Year of manufacture 2002 The machine is located in A-5431 Kuchl and can be inspected at any time during our opening hours. Subject to prior sale! Related terms: circular saw, milling machine, combination machine Reference: R-J047R

Condition: used, Combination jointer-planer machine Manufacturer: SCM LINVINCIBLE Type: 2200 Planing width: 50 cm Feed height: 20 cm 3-knife cutterhead 2 feed speeds Adjustable jointer fence Adjustable sliding rollers in the planer table Bsdpfxsz Ef Ife Af Ajln Condition: see images, or refer to the item description. Parts can also be picked up on site. All dimensions are approximate. All information is provided to the best of our knowledge but without warranty. Subject to prior sale. Shipping costs are an estimate; they may vary depending on the distance and unloading possibilities. The items can be picked up on site or shipped at the buyer's expense. The stated selling price is a net amount plus VAT. An invoice with VAT breakdown is included with the goods. Warranty basis: Due to wear and tear on used parts, the items are generally sold as defective – for spare parts – only to commercial businesses. By submitting his bid, the buyer accepts this as the basis of the purchase contract. If the offered item is a used item, the warranty is 12 months if the buyer acts as a consumer within the meaning of §13 BGB. If the buyer acts as an entrepreneur within the meaning of §14 BGB, any warranty is excluded. If the offered items are new, the warranty is 24 months if the buyer acts as a consumer within the meaning of §13 BGB. If the buyer acts as an entrepreneur within the meaning of §14 BGB, the warranty is 12 months.

Condition: used, Year of construction: 1997, operating hours: 500 h, functionality: fully functional, machine/vehicle number: Typ 250 R.B.S.EH, total width: 1,300 mm, total length: 3,200 mm, total height: 1,400 mm, trimming length: 2,960 mm, overall weight: 2,500 kg, table length: 2,50,02,920 mm, table width: 920 mm, table height: 900 mm, STEKO 250 master press, long belt grinder, veneer saw Cutting length 2970. Press 2500 x 1100, 920 for push-through operation Grinding table 2500 x 930 Blsdpfxez Ecfhj Af Ajn Includes existing grinding belts.

Condition: good (used), For sale is a used Bernardo FS41N planer-thicknesser machine with a planing length of 1800 mm. The machine has been inspected by our qualified technicians and is in good condition. Technical data: - Planing and thicknessing width 410 mm - Planing table length 1800 mm - 4 cutterblocks (reversible knives) - Thicknessing height 4-230 mm - 8 m/min feed rate for thicknessing - 2 feed rollers under the table - Dust extraction possible - 4 kW (5.5 hp) motor - Weight 420 kg The machine is located in A-8561 Söding and can be inspected at any time during our opening hours. Blsdpoz E Hypofx Af Aon Related terms: planer, thicknesser, jointer, thicknessing, planing Reference: R-E28WZ

Condition: excellent (used), Year of construction: 1998, functionality: fully functional, power: 4 kW (5.44 HP), input voltage: 400 V, input frequency: 50 Hz, planing width: 510 mm, number of blades: 4, overall weight: 430 kg, extraction nozzle diameter: 120 mm, For sale is a used FELDER AD 7-51 surface and thickness planer, manufactured in 1998. This machine impresses with its robust cast iron construction, high precision, and the typical Felder durability. With a planing width of 510 mm, the AD 7-51 is ideal for carpentry workshops, joineries, furniture manufacturing, and professional interior design. The machine is in used condition and offers a powerful combination of surface and thickness planing for daily workshop use. Equipment: • Surface and thickness planer in one machine • Robust industrial design • Precise cast iron guide tables • Self-adjusting planer knives • Powerful 4 kW drive • Proven Felder quality machine • Ideal for solid wood and furniture construction • Thicknessing unit with central, electric height adjustment Bodpfxezwnmqs Af Aoln • Feed rate for thicknessing: 6 m/min and 12 m/min • Thicknessing capacity: 4-220 mm • Massive cast iron surface planing tables for vibration-free operation • Planer shaft with 4 system planer knives • Surface planing table length: approx. 2,050 mm

Condition: used, functionality: fully functional, Year of construction: 1991, operating hours: 4,950 h, power: 139.74 kW (189.99 HP), color: green, total height: 4,089 mm, total length: 9,728 mm, total width: 4,572 mm, 1991 | John Deere 9500 | Used Combine Harvester | 4,950 hours Location: Michigan, United States Shipping available to your destination. Shipping rates can be calculated instantly. About this machine: John Deere combine harvester with a 190 hp diesel engine, 7,164 L grain tank, 17 ft unloading auger, straw chopper, and chaff spreader. Equipped with PRWD, 30.5-32 and 18.4-26 tires, and factory grain bin extension. ✔ PRWD ✔ 30.5-32 tires ✔ 18.4-26 tires ✔ 17 ft unloading auger ✔ Factory grain bin extension ✔ Straw chopper ✔ Chaff spreader ✔ 2 WD live front axle ✔ Conventional walker configuration ✔ Rasp bar cylinder Key specs: Engine power: 190 hp Blsdpfx Afjz Ebxyo Asn Engine hours: 4,950 hr Operating weight: 9,190 kg (20,260.5 lb) Grain tank capacity: 7,164 L (203.3 bu) Unloading rate: 2.6 bu/sec (90.4 L/sec) Unloading auger length: 17 ft (5.2 m) Fuel tank: 530 L Engine displacement: 7.6 L Combine type: Corn/Bean, Walker (conventional) Dimensions (L × W × H): 9,728 × 4,572 × 4,089 mm What buyers get with us: ✔ No buyer fees ✔ Verified sellers ✔ Make offer ✔ Instant shipping rates without registration ✔ Pre-sale inspection ✔ Documentation support ✔ Secure transaction on every purchase

Condition: like new (used), Year of construction: 2008, functionality: fully functional, planing width: 530 mm, tool diameter: 120 mm, number of blades: 4, actuation type: electric, rotational speed (max.): 4,800 rpm, total length of planing tables: 2,300 mm, total width: 1,000 mm, total height: 920 mm, overall weight: 750 kg, Equipment: CE marking, KNAPP AD 530 SUPER Planer-Thicknesser | 530 mm | TERSA Shaft | Electric Table Lift | Year 2008, Planer-Jointer! Professional KNAPP AD 530 planer-thicknesser, manufactured in Austria. This is a high-class industrial machine designed for intensive use in woodworking shops, furniture production, and the manufacture of window and door frames. The AD 530 model stands out with its robust construction, 530 mm working width, long cast iron tables, and a modern TERSA shaft, enabling quick knife changes without adjustment. An additional advantage is the electric table lift on the thicknesser, which provides convenient and very precise adjustment of the working height. Key advantages: - Austrian KNAPP production - Year of manufacture: 2008 - Working width: 530 mm - TERSA MONOBLOCK planing shaft with 4 knives - Quick knife change without adjustment - Electric thicknesser table lift - Automatic opening of the planer tables - Long cast iron work tables - Robust construction with a weight of 750 kg - Industrial quality construction TECHNICAL PARAMETERS: - Manufacturer: KNAPP Produktion GmbH Bjdpszxxqvsfx Af Aoln - Model: AD 530 SUPER - Year of manufacture: 2008 - Country of manufacture: Austria - Working width: 530 mm - Length of planer tables: 2300 mm - Shaft diameter: 120 mm - Shaft type: TERSA MONOBLOCK - Number of knives: 4 - TERSA knife dimensions: 530 × 35 × 3 mm - Shaft speed: 4800 rpm - Maximum planing height: 250 mm - Minimum planing height: 3 mm - Maximum material removal: 8 mm - Feed speeds: 7 / 11 / 15 / 19 m/min - Tilting fence 90°–45° - Thicknesser table dimensions: 530 × 930 mm - Motor power: 5.5 kW - Power supply: 400 V - Machine weight: 750 kg - Machine dimensions: 2300 × 920 × 1000 mm Equipment: - TERSA MONOBLOCK shaft with 4 knives - Automatic opening of the planer tables - Electric thicknesser table lift Application: The machine is perfect for: - furniture production, - carpentry, - companies producing stairs, - production of windows and doors, - processing of solid wood, - professional woodworking workshops. The machine is in very good technical condition. A solid construction ensures high operational smoothness, great cutting accuracy, and years of trouble-free operation. PRICE VAT MARGIN BRUTTO OR VAT23% INVOICE WE ORGANIZE TRANSPORT WHERE CAN YOU SEE OUR MACHINES? JBS WOODWORKING MACHINERY WOLICA DRUGA 26 23-310 MODLIBORZYCE jbsmaszyny.pl

Condition: used, functionality: fully functional, machine/vehicle number: 30242, mileage: 99,900 km, power: 338 kW (459.55 HP), first registration: 09/2018, fuel type: diesel, overall weight: 26,000 kg, axle configuration: 6x2, fuel: diesel, color: grey, driver cabin: day cab, gearing type: mechanical, emission class: euro6c, suspension: steel-air, loading space volume: 14 m³, Equipment: ABS, air conditioning, airbag, cruise control, electronic stability program (ESP), power assisted steering, seat heater, traction control, truck registration, The mileage of the offered vehicles may vary, as some vehicles are currently in rental use! Further comparable vehicles available upon request. Combination sweeper/vacuum truck with water recycling system ADR equipment, engine D2676LF52, front suspension parabolic 9.5t, rear suspension air, differential lock rear axle, trailing axle steerable and liftable, hill start assist, lane keeping assist (LGS IV), disc brakes, MAN BrakeMatic, emergency braking signal (ESS), emergency brake assist (EBA2), ABS, ASR, ESP, exhaust pipe raised on the right, tires: steering axle 385/65R22.5, drive axle 315/80R22.5, tires 385/65 R 22.5 - 315/80 R 22.5, fuel tank 400 liters - 60 liters AdBlue, length/width/height 9.550/2.550/3.800 Cab: 2 seats, driver's comfort seat with air suspension, passenger seat static, central locking, cruise control, air conditioning, fine dust and pollen filter, tilting roof, speed limiter 90 km/h, TollCollect pre-equipment, digital tachograph Conti, MAN Tronic on-board computer, MAN Media Truck Advanced radio with Bluetooth and navigation, radio system, windshield, door windows and side windows tinted, electric door window lifts, sun visor, sun shield, mirrors heated and electrically adjustable, reversing camera, 2 rotating beacons on the cab roof Superstructure KROLL with water recycling: extension piston, 3-way adjustable piston with volume division water/sludge: approx. 3 m³ / 10 m³, 5 m³ / 8 m³, 7 m³ / 6 m³, filling level indicator in front of and behind the piston with internal float and external scale, hydraulically upward-opening full-size top cover with hammer head locking, lower suction connection, water treatment unit, all working functions fully automatically controlled via CAN-BUS technology (KROLL-CANMATIC), combined operation of suction and high-pressure flushing, variable water and sludge chamber, emptying by means of discharge piston, automatically operating water treatment, can be switched off, "Self-Cleaning-Control" automatic final cleaning of all components of the WRS system without operator intervention, vacuum pump CVS water ring pump VacuStar WR 2500, suction capacity 2,500 m³/h with pneumatic pressure control valve, high-pressure pump URACA P 3-45 (approx. 348 l/min at 205 bar), hose reel cassette with simultaneous telescopic boom DN 125, large HD reel swiveling by 180° for 240 m DN 25, small HD reel for 60 m / DN 13, central control panel in stainless steel housing with louvre at the rear right, second control panel mounted on swiveling HD reel, remote control, discharge apron made of aluminum, closed hose box made of aluminum on the right, open hose box made of aluminum on the left, electric winch, rope pulley, vice, storage box, LED ambient lighting, LED work lights with 20 m cable and with approx. 15 m cable extension in drum, hand washing basin, ladder, fire extinguisher, reversing camera, rotating beacon at the rear. Bedpfx Aez Hnf Asf Aeln

Condition: excellent (used), Year of construction: 1999, operating hours: 650 h, functionality: fully functional, power: 4 kW (5.44 HP), Well-maintained, lightly used, powerful professional machine with 5 combined functions. Numerous accessories included. Features a circular saw and table router with sliding table, jointer and thickness planer, as well as a mortise drilling unit. 360 V The machine is available for sale immediately. It is located in a ground-level basement in 23858 Reinfeld. Blsdpfxozn I Aas Af Asn Transportation is the responsibility of the buyer.

Condition: good (used), Year of construction: 1999, power: 5.5 kW (7.48 HP), Equipment: CE marking, For sale is a robust and precise jointer and thicknesser from the German quality manufacturer Panhans. The machine is equipped with a Centrofix cutterblock. This quick-change system – similar to the Tersa cutterblock – allows for easy cutter replacement without time-consuming adjustment of the cutter knives. Technical data and features: +Manufacturer: Panhans +Type: AD 440/445-B +Year of manufacture: 1999 +Planing width: 630 mm +Motor power: 5.5 kW Bljdpfx Aszz Nk Eef Aon +Operating voltage: 400 V +Total length of the jointer tables: approx. 2,300 mm +Centrofix cutterblock +Cutterblock speed: approx. 5,000 rpm +Digital display for planing thickness +Electromotive adjustment of the thickness table with the push of a button +Two rollers in the thickness table +Automatic workpiece feed +Two feed speeds +Massive, finely planed cast iron tables +Folding jointer tables +Swiveling fence up to 45° +Dust extraction connection +Motor brake +CE version The robust Panhans construction ensures smooth operation and clean planing results. The digital display, the electric thickness table adjustment, and the Centrofix cutterblock allow the machine to be operated comfortably, quickly, and precisely. Ideally suited for professional use in carpentry shops, joineries, and woodworking shops. The machine can be demonstrated under power by prior arrangement. Shipping via freight forwarder is possible. You will receive an invoice with VAT shown. Price: €13,685 including VAT - €11,500 net Subject to prior sale and errors in the technical data.

Condition: excellent (used), Year of construction: 1995, Combined surfacing and thicknessing planer from Hofmann, featuring the legendary Leitz-Wigo spiral cutterhead, very robust construction in a compact design. Special feature of this machine: The surfacing table does not need to be folded up for thicknessing, so no conversion is necessary. Equipped with a "genuine" spiral cutterhead. Planing width approx. 620 mm Thickness table electrically adjustable with digital display, fine adjustment via handwheel Grooved steel infeed roller Rubberized outfeed roller, new Planing height approx. 4 - 240 mm 2 feed speeds 7 + 14 m/min Table length 2520 mm Drive motor 5.5 kW with automatic motor brake 2-knife cutterhead with spiral-shaped, re-sharpenable HSS knives Two sets of spiral knives are included, each mounted in matching pressure blocks. Re-sharpening is done by a sharpening service, and the sharpened knife sets can then be easily screwed into the cutterhead without any adjustment work. Slotted table lips Cutterhead guard Suvamatic Fence swivels with guide strip Concave and pointed edge setting for the surfacing tables Rod for hanging the dust extraction hood Dust extraction port 2 x 160 mm Only a few touch-up spots V-belt renewed Knives sharpened Rubber outfeed roller renewed Operating manual CE marking No scratches on the tables. Thickness table with two adjustable table guide rollers Dimensions approx. 2520 x 1200 x 1200 mm (L x W x H). Weight approx. 1300 kg. Bedpsztkyxofx Af Aeln The machine can be demonstrated on site by appointment. We only offer machines that are ready for demonstration and are in our warehouse; see "other offers from this supplier".

Condition: good (used), Code: 0486 Brand: SCM MINIMAX Model: CU 410 CLASSIC - CE Standard Universal professional high quality 6-works combined machine for joinery, production of furniture, custom furniture, panels, doors, window frames and various - CE Standard Technical data: Sturdy construction: the base consists of a single, fully welded steel monoblock Surface Planer: Max working width mm 410 Bjdpfx Ajz E Sgusf Aoln Length of cast iron worktables mm 1800 Tiltable surface fence 90-45° Planer spindle rotation speed rpm 5200 Max removal at planer mm 4 Thickness planer: Thickness table size mm 605 x 410 Feed speed at thickness mt/min 7 Min/max working height on thicknesser mm 3/230 Circular saw: Squaring carriage length mm 2250 Squaring frame Blade inclination 90-45 degrees Max diameter of saw blade with installed scoring unit mm 315 Max saw blade projection mm 100 Scoring unit blade unit diameter mm 80 Cutting width at parallel fence mm 1050 Telescopic guide with 2 squaring stops Spindle moulder: Spindle diameter mm 30 Max spindle length mm 100 Spindle rotation speed rpm 1400/3500/6000/8000 Max tool diameter mm 210 Mortiser: Cast iron mortiser with spindle diameter 16 mm Work surface dimensions 470 x 220 mm Workpiece clamping press N° 3 Three-phase motors Hp 5,5 Suction connections N° 3 ports diameter mm 120 Overall dimensions of assembled machine mm 2500 x 2800 x 1200 h Overall dimensions for transport mm 2500 x 1600 x 1200 h Weight kg 630

Condition: excellent (used), SCM nova fs410 thicknesser planer Planing width: 410mm, 4 knives, Blodpfx Ajz Epcgjf Aon 2 feed speeds, Thicknesser table mounted on 4 screws, Manual adjustment of the thicknesser table, Max. planing thickness: 240mm, Length of the planer tables: 220cm, Electric brake, Adjustable planer fence, 7KW motor, Machine inspected, very good condition, Weight: approximately 550kg.

Condition: excellent (used), functionality: fully functional, SLIDING TABLE SAW Carriage length: 1250 mm Scoring unit Saw unit tilts up to 45° Manual saw blade raise and lower Motor power: 2.2 kW SPINDLE MOULDER Spindle diameter: 30 mm Manual spindle raise and lower 2 spindle speeds: 4500/6000 rpm SURFACE PLANER-THICKNESSER Bsdpsz D Ad Ijfx Af Aeln Working width: 300 mm 3-knife cutterblock Standard knives Table dimensions: 1500x300 mm Thicknesser table: 300x600 mm HORIZONTAL BORING MACHINE 460 kg Year: 2009

Condition: excellent (used), For sale is a used Record Power thickness planer with a planing length of 1110 mm. The machine has been inspected by our qualified technicians and is in very good condition. Blsdpfx Afoz E Hx Ej Aen Technical data: - Planing width 265 mm - Planing table length 1,110 mm - Stock removal per pass 3 mm - Planing fence, adjustable up to 45° - Cutterhead diameter 75 mm - Max. thickness 190 mm - Feed rate for thicknessing 5 m/min - Motor 1.7 kW / 2.3 HP / 230 V - Dust extraction port 100 mm - Weight 162 kg The machine is located in A-8561 Söding and can be inspected at any time during our opening hours. Related terms: Planer, thicknesser, surface planer, planing, thicknessing Reference: R-M61I4

Condition: used, functionality: fully functional, machine/vehicle number: 35539, mileage: 1,09,900 km, power: 310 kW (421.48 HP), first registration: 01/2017, fuel type: diesel, overall weight: 26,000 kg, axle configuration: 6x2, fuel: diesel, color: blue, driver cabin: day cab, emission class: euro6, suspension: steel-air, loading space volume: 10.3 m³, Equipment: ABS, air conditioning, airbag, cruise control, electronic stability program (ESP), power assisted steering, seat heater, traction control, truck registration, The mileage of the vehicles offered may vary, as some vehicles are currently in rental use. Further comparable vehicles are available upon request. Combination sweeper/vacuum truck with water recycling system Engine OM471, disc brakes, Active Brake Assist, ABS, ASR, ESP, lane keeping assist, attention assist, hill start assist, front axle 8t, 3-leaf springs, rear axle air-suspended, rear axle 13.4 t with differential lock, steerable and liftable 7.5 t trailing axle, axle load measuring device, rear underrun protection, pneumatically extendable M-cab ClassicSpace (width 2300 mm, tunnel 170 mm), 2 seats, driver and passenger comfort seats, tinted windshield, sunroof, heated mirrors, electrically adjustable, electric windows, comfort central locking system, multifunction steering wheel, digital tachograph VDO, pre-installation for toll collection system, air conditioning, cruise control, speed limiter, reversing camera, rotating beacon on the cab roof Wall thickness 5 mm, diameter 1700 mm, material: stainless steel, fresh water tank 2.7 cbm, sludge tank 7.6 cbm, gross volume 10.3 cbm Water ring pump KWP 2000, flow rate 2000 cbm/h, max. vacuum 0.85 bar, max. pressure 0.5 bar The vacuum pump is installed in the fresh water tank and supplies itself with operating water, with additional sound insulation and cooling by water insulation. Suction and pressure operation is also possible in the tilted position. Automatic separator emptying when switching to pressure operation. Bodez Hm Rwepfx Af Aoln Opening door with lever lock for quick access to the pump compartment. Pressure relief valve set to 0.5 bar. High-pressure system Kaiser pressure converter KDU 148-350. Flow rate up to 350 l/min at max. 200 bar. Lockable side box made of stainless steel on the right side of the tank, length 3,600 mm, control panel and holder for radio remote control, LED lighting, attachment tray for additional suction hoses, separator in front of the vacuum pump with automatic emptying, full-torque lid made of stainless steel with Kaiser clamping ring and float level indicator, suction and outlet connections NW 100 (pneumatically operated), tilting device for the body for quick emptying by means of a multi-stage hydraulic tilting cylinder, high-pressure hose reel with a capacity of 220 m (1") or 150 m (1/4").

Condition: like new (used), Year of construction: 2021, For sale is a Hammer A3-41 jointer-planer, a demonstration model with a planing length of 1800 mm. The machine has been inspected by our qualified personnel and is in like-new condition. Technical data: - 3-system cutterhead - Planing width 410 mm - Planing length 1800 mm - Max. feed height 225 mm Bedpfoz Atb Dsx Af Ajln - Dust extraction port Ø 120 mm - Motor power 4 kW - Year of manufacture 2021 The machine is located in A-5431 Kuchl and can be inspected at any time during our opening hours. Related terms: jointer, planer, thicknesser, jointing, planing Reference: R-A0117

Condition: used, For sale is a used Hammer A3-31 surface planer and thicknesser with a planing length of 1380 mm. The machine is in good condition and has been inspected and refurbished by our service team. Technical data: Bledpfoz Eucfsx Af Ajn - 3-knife cutterhead - Planing width 310 mm - Planing length 1380 mm - Max. workpiece height 230 mm - Dust extraction port Ø 120 mm - Motor power 3 kW / 4.1 HP - Year of manufacture 2010 The machine is located in A-5431 Kuchl and can be inspected at any time during our opening hours. Related terms: Planer, thicknesser, planing machine, surfacing, thicknessing Reference: R-S255D