Used Stahl Press Station for sale (17,569)

Condition: used, Year of construction: 1988, pressure 400 t distance between columns 1100 mm stroke 250 mm no. of strokes 25 - 75 /min distance table/ram, max. stroke up, adjustment up 900 mm table surface area 1100 x 965 mm capacity of ejector in table 30 t ejector stroke of ejector in table 80 mm capacity of ejector in ram 3 t stroke of ejector in ram 60 / 70 mm Hedpfx Afszrpt Uelsfk ram surface 980 x 800 mm column travel -side 800 mm ram adjustment 20 mm power capacity 80,0 + 5,5 kW weight 47,0 t Dimensions (WxDxH) 3,5 x 3,3 x 6,0 m weight of switch cabinet 1,4 t dimensions of electrical cabinet (WxDxH) 4,9 x 0,5 x 2,6 m Multi-station cold extrusion press with link drive with infinitely variable drive, hydraulic clutch-brake combination (Ortlinghaus), hydraulic overload protection in the slide, motorised slide adjustment, pneumatic counterbalance cylinder in press frame, cam-controlled ejector in table (30 t / 80 mm), pneumatic ejector in slide (3 t, 60 mm), motorised central lubrication

Condition: good (used), Year of construction: 2008, functionality: fully functional, Automatic binding, stitching, and cutting machine (VSHRA), designed for serial production of brochures bound with wire staples. Working condition 4 automatic feeding stations for signature insertion. Maximum trimmed format: 30.5 x 34.9 cm. Minimum trimmed format: 8.9 x 12.0 cm. No documentation available. Hodpfsyb Tcajx Aflsfk

Condition: used, 2-station notching machine and folding machine EUROMAC type Multi 220/6R Press brake, press brake, notching machine Serial no. M11941298 Year of manufacture 1998 Cutting capacity 6 mm steel at 45 kg/mm2 4 mm for stainless steel Station I (notching) Notching angle 60° to 140° (with special blade from 30° to 140°) Knife length 220 mm Table size 950 x 640 - Manual angle adjustment via hand wheels - Notching angle with built-in blade set from 60° to 140 - Hydraulic clamping of the upper and lower knives - Automatic cutting gap adjustment - sheet hold-down device - Scaled measuring tapes embedded in the table - stop rails with angle adjustment - Operation via foot switch Station II (die bending device) Pressure force 18 ton Table size 950 x 340 Working height 1100 mm - stepless lifting speed - Infinitely adjustable stroke limiter - Stroke adjustment up to 30 mm working stroke - Reversible prism with 4x 90° prisms, length = 415 mm - 90° upper tool, length = 415 mm Motor power 4 kW Mains connection 400 Volt, 50 Hz Space requirement L x W x H 1150 x 1050 x 1460 mm Hodemck Ryjpfx Aflsfk Weight approx. 1000 kg good condition

Condition: excellent (used), German-made hydraulic bookbinding press, 14 stations - rotary Hfjdpfx Aowm Hhzsflek

Condition: used, Year of construction: 1988, machine/vehicle number: 26184, Presstation / Press station Stahl PS 46Year 1988 - Serial-No. 26184 Hfedpsh Axlhefx Aflek Arbeitsbreite / Working width max. 460mm Online-Video-Inspection by Skype-Video We would be very pleased with your visit - more machines on Stock Available Immediately - Can be inspect On Stock Emskirchen / Nürnberg - Can be test

Condition: good (used), 4-station bookbinding press for gluing blocks MURO 4 x 5000 A4/HAD Solid construction, waterproof board, and galvanized components. The machine is in perfect condition. Technical specifications: Format: 350x320x550 (W/D/H) Number of stations: 4 Hodpjzfwycefx Afljfk Power supply: 230V Maximum power consumption: 4kW Weight: 102kg High clamping force, flywheels with a comfortable grip. Electric drying with two power levels: 2 and 4kW Each press can be tilted up to 45′ The structure is mounted on wheels for easy movement.

Condition: excellent (used), For sale: a robust, double-station bookbinding/printing press from the renowned German manufacturer Karl Tränklein K.G., Maschinenfabrik Stuttgart – Schönaich. This machine was previously operated by the public sector unit Stadt Fürth (Germany), which ensures it is complete and well-maintained. The device is equipped with two independent workstations, a heavy-duty upper beam, and pressure adjustment via lever arms. The lower housing contains the mechanical and electrical systems; power is supplied through a 16A CEE connector (400V). The machine is mounted on wheels for easy mobility. Application Hodpsxzu Rqjfx Aflsfk This press is suitable for bookbinding, printing, modeling, technical works, and any applications requiring even pressure over a larger area. Ideal for book blocks, covers, laminates, paper and cardboard elements, and other materials that require pressing or stabilization under pressure. Technical condition – Complete unit – All levers and mechanisms function correctly – 400V power supply, CEE 16A plug – Mobile design on wheels – Normal signs of use visible in photos – Machine is ready for operation Manufacturer: Karl Tränklein K.G. Country of manufacture: Germany (Made in Germany)

Year of construction: 2006, condition: like new (used), Container volume 32 m3 Hjdjfhb Tkepfx Afljfk

Condition: like new (used), Year of construction: 2002, functionality: fully functional, Manufacturer: NAVA Hfjdpfex R U Nuox Afljk Model: 2MI1600DE/SE Year: 1998 Condition: Used Stock number: 0367 Pressing force: 1,600 tons Number of pressing points: 4 Ram stroke: 1,200 mm Upper punch stroke: 1,500 mm Ram size: 4,500 x 2,500 mm Table size: 4,500 x 2,500 mm Blankholder cushion – total force: 400 tons Lower blankholder cushion stroke: 500 mm Withdrawable carriage: Present, front side

Condition: excellent (used), functionality: fully functional, Year of construction: 1994, Overhead crane / circular track for painting booth + dipping station + transfer unit Load capacity: 250 kg Hfjdpfx Aozdbw Rsfljk With explosion-proof chain hoist and complete control system Dimensions, required space, steel structure: approximately 6 x 3.5 m Highest point: 3.5 m Crane track height: approximately 2.6 m Steel structure / running rails made of IPE200 and HEA120 beams With additional running rail and trolleys Control system and explosion-proof switch for chain hoist Crane is disassembled and packed on a pallet. Used condition - see pictures Collection only by prior arrangement in 75053 Gondelsheim Forklift available for loading Shipping via freight forwarder is possible; please inquire with your postal code.

Condition: used, mileage: 1,001 km, gearing type: other, fuel type: diesel, color: yellow, first registration: 01/1995, Year of construction: 1995, driver cabin: other, Vehicle location: Bovenden, Body: Hydraulic station, compressor Mercedes Benz V8 engine ACCESSORY INFORMATION WITHOUT WARRANTY, subject to alterations, prior sale and errors excepted! Hjdpfx Afougwrajlefk - .

Condition: used, Technical Commercial Datasheet – Integrated KAESER CSDX 165 T Air Compressor Station Manufacturer KAESER KOMPRESSOREN (Coburg, Germany) Type Complete "All-in-One" industrial compressed air station, featuring a fluid-injected rotary screw air compressor with variable speed control (CSDX Series), an integrated refrigeration air dryer (Module T), and an advanced SIGMA CONTROL 2 electronic monitoring configuration. Industrial Applications Continuous, high-efficiency plant air generation for automated manufacturing facilities, heavy assembly lines, packaging plants, plastics processing, and automotive industries. The variable speed drive system matches actual compressed air consumption in real time, eliminating peak starting currents and optimizing plant energy performance. Key Technical Specifications * Main Compressor Unit: KAESER CSDX 165 T (CSDX Series / Integrated Dryer Version) - Technology: Fluid-injected rotary screw compressor featuring premium SIGMA Profile rotors - Regulation System: Variable speed control via an integrated frequency inverter (SFC / Sigma Frequency Control) - Nominal Motor Power: 90 kW - Air Flow Range: Dynamic adjustment based on plant load profile (up to approximately 16.15 m3/min maximum capacity) - Maximum Working Pressure: 8.5 bar max (Current digital setpoint displayed: 7.5 bar) - Integrated Air Dryer (Module T): Refrigeration air dryer utilizing eco-friendly R-513A refrigerant (2.6 kg charge), with a maximum pressure of 32 bar on the cooling circuit side. - Electrical Requirements: 400 Volts / 3-Phase / 50 Hz - Control Interface (SIGMA CONTROL 2): - Total running hours: 26,805 h - Hours under load: 15,272 h - Current system pressure: 0.00 bar (at standstill) / Internal package temperature: 24 °C Machine Utilization This KAESER CSDX 165 T workstation draws ambient atmospheric air and compresses it through its high-efficiency 90 kW fluid-injected screw airend. The frequency inverter continuously regulates the engine speed to prevent the unit from wasting power during low-demand windows. Saturated, hot compressed air exiting the screw block is directed straight into the built-in refrigeration dryer module (Module T). The dryer chills the air stream down to its pressure dew point, condensing and safely discharging moisture to deliver clean, dry, and precisely regulated air to the factory floor line. System Highlights * Compact All-in-One Workstation Footprint: By enclosing the compressor and the refrigeration dryer unit inside a single acoustically insulated cabinet, the station significantly reduces necessary floor space, transport overhead, and engineering installation costs. Hedpfjzcaufex Aflofk - SFC Variable Speed Energy Efficiency: The dynamic matching of motor output to actual pneumatic network demand ensures a highly optimized electrical power factor and an exceptionally competitive cost per cubic meter of air. - Intelligent SIGMA CONTROL 2 Management: This interface monitors all critical operating metrics (pressions, temperatures, and maintenance schedules), ensures advanced industrial network compatibility, and confirms a healthy machine history with low un-loaded idling hours (only 43% idle time relative to total run metrics). - Future-Proof Eco-Refrigerant: The integration of R-513A refrigerant meets strict international F-Gas environmental guidelines, securing the long-term operational legality of the cooling loop without risks of sudden regulatory phase-outs.

Condition: used, Year of construction: 2011, Additional title: Booster station with chemical dosing pumps Position: standing on frame with protective screen Features: Centrifugal pump (Grundfos), 1 pressure sensor, 4 diaphragm metering pumps with PVDF dosing head and microprocessor control, 4 Flow Control PVDF for diaphragm dosing pump, 4 impinges, inductive flow meter (Endress + Hauser) Hodpfxexbqpij Afljfk

Condition: ready for operation (used), Year of construction: 2016, Felder clean air extraction unit | Dust extraction system RL 200 | Ø 200 mm Maximum flow rate: 4000 m³/h Nominal flow rate: 20 m/sec, 2300 m³/h Valve pressure: 2380 Pa Filter area: 20 m² Extraction connection diameter: 200 mm Residual dust content: < 0.1 mg/m³ Felder Briquetting Press FBP 50 Briquette diameter: 50 mm Throughput: 30–50 kg/h Motor power: 4 kW Dimensions (L x W): 1750 x 1270 mm Hjdpfx Aowa Rlkoflsfk Weight: 950 kg Hydraulic oil capacity: 125 liters Year of manufacture: 2016 Condition: Ready for use Price: €15,500 The system has already been dismantled and is stored in the Raasdorf warehouse.

Condition: good (used), Press: BJ 2000 380V 32A 3,300 x 2,100 x 2,200 mm (LWH) Coupling container: BJ 2016 25 m³ Hedpfx Ajv D A Itjflefk 6,000 x 2,500 x 2,600 mm (LWH)

Condition: good (used), Press: BJ 2000 380V 32A 3,300 x 2,100 x 2,200 mm (LWH) Coupling container: Hfodpfev D A Ruex Aflok BJ 2016 25 m³ 6,000 x 2,500 x 2,600 mm (LWH)

Condition: like new (used), UNDER CONSTRUCTION We are currently in the final stages of a complete overhaul of a fully automatic stationary press. This stationary press is including 2 containers 30m3 equipped with side door Build in: RV 2025 Overhaul work we have carried out: -new floor Hjdpfew Uc T Usx Aflefk -new side panel -new guide blocks and guide plates - pressblock overhauled -cylinders fitted with new sleeves -new fork pins -new return filter -new hydraulic hoses -oil renewed

Condition: used, Year of construction: 2000, functionality: limited functionality, overall weight: 8,000 kg, type of input current: AC, Equipment: documentation/manual, Curd pre-pressing vat with a capacity of 12,000 litres and filling station cheese moulds from Tetra Pak Tebel. Year of manufacture 1999. In good condition, but with obsolete automation/PCL. We can provide PLC replacement and refurbishment on request. Available to visit. Documentation available. Hsdpjulnrvjfx Afljfk

Condition: ready for operation (used), Rema-4-Station Grinding Machine -Angle adjustable -Tilt adjustable -Oscillating -Cooling system -Work light Dimensions: L x W x H 1.5 x 1.5 x 1.5 meters / Weight 450 kg Hedpjztdzpefx Aflofk Errors and omissions excepted.

Condition: good (used), STAHL T36/4 Pharmaceutical Folding Machine Made in Germany. The world’s highest-class folding machine. Very good condition. Infinitely variable feed and folding speed adjustment. Module with 4 cassettes. Elevator feeding (high pile). Electronic delivery with speed control. The machine is ideal for folding pharmaceutical leaflets thanks to its low fold and large number of cassettes. Cassette soundproofing. Technical specifications: Max size: 360x550mm Min size: 80x100mm Weight: 350kg 380V power supply Hsdpjzur A Defx Aflsfk

Condition: good (used), HFS-210 Hot Stamping Press The machine is in perfect condition. Year of manufacture: 2019. Description: The HFS-210 Hot Stamping Press is a pneumatic hot stamping press for hot stamping, embossing paper, and plastics. A useful device in any advertising agency or digital printing house. The cycle is operated manually. The pneumatic drive ensures repeatable work and very high die pressure on the material. The machine is equipped with an automatic foil feed, which significantly shortens the time of a single hot stamping cycle, a worktop, adjustable embossing depth, a hot plate ground to 0.01 mm accuracy, which significantly improves the quality of embossing with large dies, a control panel, and modern OMRON controls. Specifications: MODEL: HFS-210 Hot Stamping Press Hfsdpfx Afjzt H U Sslek Heating plate size: 210 x 150 mm Work table area: 500 x 350 mm Heating temperature control: via display up to 200°C Holding foil adjustment: Automatic, potentiometer-controlled Hot plate pressure mechanism: pneumatic Height of the gilding stack: 68 mm Press force: 0.6 T Power consumption: 900 W Power supply: 230 V Machine dimensions: 750 mm (W) x 530 mm (D) x 1670 mm (H) Machine weight: 120 kg The machine includes a cross table and a die mounting frame. An instruction manual is included.

Condition: good (used), Bookbinding press with tapping block Hsdpozt H U Ejfx Aflofk The machine is fully operational and ready for use. Approximate format: 480 x 330 mm 3-ton pressure

Condition: good (used), Screw bookbinding press 40×30 with base The machine is fully operational and ready for operation. Hjdpfx Afjzt H Uxolsfk Format: 400×300 mm Pressure: 3 tons Made in Germany.

Condition: good (used), Just Normlicht Proof Control Station Ideal as a control desk for a printing machine. 230V power supply 3 drawers + opening cabinet. Hfodpfeztn Uaex Aflek Keyboard drawer. Electronic light control (luminous intensity).

Condition: good (used), Year of construction: 1985, Electric chain hoist, crane, overhead crane, assembly crane, manual trolley, trolley, trolley drive, crane drive, crane travel, trolley -Manufacturer: Steel, electric chain hoist with chassis -Chain hoist: Type T 302 L, load capacity 500 kg -Main stroke: 4 m/min -Fine stroke: 1 m/min -Hook path: 5 m -Crane chassis: Maximum beam width 135 mm Dimensions: see photo and technical drawing -Transport dimensions: 600/550/H420 mm Hfedpfozt Rvajx Aflok -Weight: 49 kg