Refrigerated truck

MAN TGL 12.240 Kühlkoffer 4x2 Bj 2006

Condition: new, TURBO-BOOST-TEST turbocharger boost testing bench allows for professional turbocharger calibration and performance evaluation. The test bench can be used in turbine tuning and refinement, in the manufacture of hybrid turbines, to test changes in turbine performance after tuning. Our test benches are advanced systems for turbocharger tuning and testing in dynamic mode. Its provide turbocharger testing under near realistic operating conditions, ensuring full process control and detection of any potential problems, including oil leaks. HIGHLIGHTS • Complete finish testing and tuning of automotive turbochargers for engines up to 3 liters Fedpfx Adjttg S Usdsgk • Dynamic turbocharger testing • Installation on the regular surfaces of fastening • Running in and check on an oil leak • Tuning of electronically driven turbos is done by connecting to an external tester ATP-3000 • Installation of turbochargers of any design KEY FEATURES • More than 2000 turbo references database • Calculate turbocharger performance; • Plot supercharging vs. inlet and outlet flow graph; • Generating the resulting graph; • Testing of actuator performance: vacuum, pneumatic and electric types; • Diagnosis of servo-drives of electric actuators (optional); • All measurements are done in real time. • Calibration of the test bench before starting work • N75 valve testing function • Built-in blower pump to create a constant airflow • Self-developed Boost Test software. • Creation and printing of reports on the tuning process. • Self-diagnostics SPECIFICATIONS Maximum rotor speed 99 000 rpm Maximum air flow rate of compressor 110 m³/min Maximum pressure of compressor 900mbar Maximum vacuum created by the vacuum pump -800mbar Power supply 380V, 3Ph, 50Hz Power input 6 kW Dimensions 1330 х 770 х 1440 mm Weight 265 kg

Year of construction: 2025, condition: new, GeoBoost-7000 Combined bench for turbocharger geometry calibration and performance evaluation. Stand for static and dynamic calibration and testing of turbocharger. It has a combined two-position design, which allows testing the turbocharger in two modes - rapid static calibration of turbocharger geometry - Full dynamic diagnostics at different operating modes GeoBoost-7000 will allow you to carry out professional testing of turbocharger operation during repair, tuning or modernization. The availability of two working zones of the machine depending on the testing method helps to carry out comprehensive diagnostics. HIGHLIGHTS • Simulates real-world operating conditions for accurate turbocharger diagnostics and tuning. • Flexible and versatile to work with a variety of turbocharger models. • All types of turbochargers can be installed using the accessories provided. • Oil leak testing using heated oil and compressed air. • N75 turbocharger control valve testing. KEY FEATURES Fgodpfjvtn Hmox Addek - Ability to adjust the extreme position of the blades of the air flow control mechanism. - Adjusting the length of the stem to adjust the actuation torque of the air flow control mechanism. - Real-world turbocharger testing; - Real-time geometry tuning; - Performance testing of actuators: vacuum, pneumatic and electric types; - Diagnosis of servo-drives of electric actuators (optional); - Post-assembly testing of the turbocharger for oil leakage; - Availability of a high capacity vacuum pump to create the required vacuum and air flow. - Testing the turbine according to the manufacturer's test plan; - Calculate turbocharger performance; - Plot supercharger inlet and turbocharger outlet boost vs. flow; - Construct the resulting graph; - Generate and print test reports. SPECIFICATIONS Maximum rotor speed 99 000 rpm Maximum air flow rate of compressor 110 m³/min Maximum pressure of compressor 900mbar Maximum vacuum created by the vacuum pump -800mbar Power supply 380V, 3Ph, 50Hz Power input 6 kW Dimensions 1700 х 900 х 1500 mm Weight 400 kg

Year of construction: 1987, condition: used, machine/vehicle number: 7.0176, Note: We have 6 pieces of this machine in stock! Manufacturer: Gildemeister Type: GS 36 - 6 A/C Machine No.: 7.0176 Year of manufacture: 1987 Weight: 11t General / technical data: Portal-6Spindle automatic lathe spindle pitch circle: 300mm number of longitudinal slides: 6 number of cross slides: 2 large cross slide stroke: 60mm largest longitudinal slide stroke: 125mm Spindle speeds: Stepless 562 - 3373 rpm Main time range: Stepless 1,95 - 78 sec. Secondary time range: 0,79 - 2,13 sec. Drive power: DC motor spindles 20kW; feeds 8kW footprint: approx. 1720 x 4700mm Remark: The machine is not convertible for bar work. Equipment: - 1 creep feed drive for set-up operation - 1 automatic central lubrication device - 1 coolant device with pipes and pump - 1 cross slide, position 3 (without curves) - 1 cross slide, position 5 - 6 longitudinal slides (without drive, without curves) Fedpfsin Ub Tex Addogk - Feed for independent longitudinal slide, flexible, position 1-6 - Programmable logic controller IPC 620 - Noise protection 80db - Automatic feed restart with electrical protection of the side door - Schanier belt chip conveyor - Design of the machines with DC drives for speed and feed - KIENZLE terminal 2450-07 with signal interface and data transmission control. Accessories: Electrical version: The electrical equipment consists of a DC main drive with power 20 kW for the spindle drive and a three-phase servo motor for the feed drive with power 8kW (protection class IP 54) and corresponding switchgear and control devices as well as the necessary installation. Total connection of the machine 32kW/h.

Condition: used, mileage: 6,78,000 km, Year of construction: 2004, Serial number: XLER6X2000510xxxx Please contact ATS Norway for more information Please provide reference number upon request: 20681 Specifications: Model year: 2004 Mileage: approx. 678,000 km Transmission: Manual Suspension: Full air Tires: See photos Length: 938 cm Width: 250 cm Wheelbase: 490 / 136 cm Curb weight: 10,100 kg Driveline: 6x2 Power: 420 hp Equipment: Tool compartment Tow hitch Bed Radio/CD Air conditioning / climate control Fgedpowqwmcofx Addek Description:Scania R420 6x2 container truck, model year 2004.The truck starts and runs, but some repairs and investment will likely be required to pass EU roadworthiness inspection. Note: The container body is not included. Available for quick delivery upon agreement. Km: 678000 HK: 420 Technical approved: no EU-approved until: 12.07.2024 Own weight: 10100 Total Weight: 27000 Payload: 16825 Width: 250 Length: 938 Euro: 3 Model: R420 Gearbox: Manual

Condition: used, operating hours: 4,500 h, Serial number: 30xxxx Please contact ATS Norway for more information Please provide reference number upon request: 21752 Specifications: Fjdpfx Adexvlc Tedogk Hours: approx. 4500 Capacity: 20 tons Winch Tires (see pictures) Outriggers New batteries Description:Kato KR-20 mobile crane with approximately 4500 hours.The crane is functional but no longer certified (last certified 11/2023).20-ton capacity.There is a contact fault in the horn, so it does not make a sound when the crane is extended.Can be delivered at short notice. Hours: 4500

Condition: used, Year of construction: 1970, functionality: fully functional, machine/vehicle number: D12L/8394, Offer Number: D12L/8394 Machinetype: wire nail press Make: WAFIOS Type: S75 Constr. year: 1970 wire diameter: 1,8-3,1 mm nail length: 10-75 mm output - pieces/min: 420 Location: In our warehouse Fgjdpfx Asw Nhwujddsk

Condition: used, Year of construction: 2017, operating hours: 1,124 h, load capacity: 230 kg, lifting height: 16,800 mm, empty load weight: 8,050 kg, construction height: 2,250 mm, fuel type: diesel, total length: 7,700 mm, drive type: Diesel, construction width: 2,190 mm, working height: 16,800 mm, Articulated telescopic platform Description: Articulated telescopic platform with supports Fgsdpfx Asvpmh Ujddsk

Condition: new, Year of construction: 2025, Fully automatic tube filler for pastes and liquids. Typically for cosmetics such as make-up, creams, general care products such as shower gel, hair shampoo, hair gel, toothpaste, sun blocker etc. Suitable for premade aluminum tubes with closed cap. Fully automatic feeding, alignment of the tubes (rotation in the mould) based on print markings as well as filling and sealing of the tubes. Before filling, the tube is air-flushed to prevent contamination. No-tube-no-filling is also a standard function. Water chiller, batch/date printer and dosing unit, consisting of pneumatic piston pump and storage hopper with level sensor, are included. PLC controlled, operation via touchscreen. Optional at surcharge: heated stirrer for storage hopper, additional format sets (moulds) for different tube diameters, external tube feed lift. - Specifications: max. speed of the machine in neutral: 65 cycles/minute; filling range: 1-400ml; accuracy: ±0.5%; tube diameter: 10-50 mm (one mould is required for each tube diameter); tube length: 80-230 mm; number of filling heads: 1; storage hopper capacity: 45L; parts in contact with the product are 316L stainless steel; power supply: 220/380V, power consumption: 9kW; compressed air: 0.4-0.6MPa; machine dimensions: L2000xW1160xH2100 mm. Fsdpfx Adsv Nlduedjgk Please note that our new prices are often below the usual used prices. Please feel free to inquire and tell us your packaging task. - Usually 30-50 different new machines are available immediately from stock. In addition, we have very short delivery times from approx. 3 weeks for customized machines. Deviations from the sample photo are possible. - All machines are available with full warranty.

Condition: used, empty load weight: 4,600 kg, maximum load weight: 13,390 kg, overall weight: 18,000 kg, axle configuration: 2 axles, first registration: 05/2000, loading space length: 6,700 mm, loading space width: 2,500 mm, suspension: air, wheelbase: 5,130 mm, Year of construction: 2000, Height: 1.12 m Fjdpow Srz Nofx Addsgk Technically in good condition Year of manufacture: 2000

Condition: used, mileage: 8,75,329 km, power: 310 kW (421.48 HP), first registration: 05/2014, overall weight: 26,000 kg, fuel type: diesel, color: white, axle configuration: 3 axles, maximum load weight: 13,134 kg, empty load weight: 12,866 kg, brakes: engine braking, driver cabin: other, gearing type: automatic, emission class: euro5, suspension: steel-air, number of seats: 2, Equipment: ABS, differential lock, onboard computer, trailer coupling, , Manufacturer: Mercedes Benz - Type/Model: Actros 2642 Chassis without body - First registered: 13.05.2014 - Mileage: 875,329 km - Number of axles: 3 - Emissions class: Euro5 - Driver's cab: L - Gearbox: Automatic - Continuous brake: Engine brake - Suspension: Leaf-air - Lift axle - Steering axle - Axle type: MB - Brake: Disc - Air conditioning - Length: 9700 mm - Width: 2520 mm - Height: 3320 mm - Unladen weight: 12866 kg - Fgedpfx Asvkxg Soddsk