Screw compressor

MARK MSM5.5D TM500

Condition: new, Year of construction: 2024, functionality: fully functional, overall weight: 300 kg, volume flow: 60 m³/h, pressure (max.): 10 bar, tank capacity: 500 l, Equipment: documentation/manual, refrigerant dryer, type plate available, PROD. MARK Chjdpfx Afovrcuce Aoc TYPE MSM7.5D TM500 S/N ITJ874643 YEAR 2024 CAPACITY (kW) 7.5 OUTPUT (m3/min) 1 m3/min CIS (bar) 10 BUILT-IN DEHUMIDIFIER YES ON 500L TANK DOCUMENTS YES NEW/USED NEW

Condition: new, Year of construction: 2026, Comparable to: e.g. Emmegi Double mitre saw for steel Cutting length: 5,000 mm Equipped with 7 NC axes for length positioning, outward and inward saw blade inclination, saw blade feed, and saw motor speed control Torsion-free welded construction with longitudinal linear guideways 2 x saw motors, each 4.5 kW Saw blade speed: 0–250 rpm Saw feed motorized from rear to front Feed speed infinitely adjustable Motorized angle adjustment between 135° and 45° Suitable for HSS circular saw blades, Ø 400 mm Pneumatic protective covers Water cooling with pump and coolant tank Left saw unit fixed to the base frame, right unit motorized and traversable Positioning accuracy: ± 0.15 mm Max. traverse speed: 25 m/min Length positioning compensates for saw angles and profile height Each saw head fitted with three horizontal and vertical profile clamps; in the event of pressure loss, the horizontal cylinders remain clamped Pneumatically swivelable material support between the saw heads 15” touchscreen Single cut processing Processing of cutting lists Creation of cutting lists via keyboard Import of cutting lists via USB flash drive or network interface Corner cutting Overlength cutting Short cuts from 5 mm cutting length Crosscuts Chjdpfjyinu Hsx Af Aoc Available options: Micro-spraying unit Saw head inward inclination increased to 150° Label printer Barcode scanner Additional network interface and teleservice agreement

Condition: used, machine/vehicle number: 008166, X axis working area: 4250 mm Y axis working area: 1250 mm Working Table: Pod and Rail Main Electrospindle power: 9 KW Number of controlled axes: 4 axes Cedpfx Afeyy U S Is Aehc Total number of drilling spindles: 25 Total number of tool changer positions: 14

Condition: excellent (used), functionality: fully functional, CECCATO CSM 5.5 X mini screw compressor Power 4kw Working pressure 10bar Efficiency about 470l/min Noise level 62dB Dedicated dryer Air tank 270l Cjdpfx Afsvurtte Aehc

Condition: excellent (used), Year of construction: 2012, WALTER WD 250/350 30 and 37 kW shaft multisaw – Polish production – year of manufacture 2012 – DTR and CE TECHNICAL PARAMETERS: cutting height 170 mm cutting width 350 mm Cedpfemv Elpsx Af Aohc spindle diameter 2 x 70 mm diameter of circular saw blades 300 mm spindle motor 30 kW and 37 kW feed motor 1.5 kW seven lower pulling rollers two upper toothed pulling shafts length of the feeding table 3000 mm spigot diameter belt collecting waste from under the machine 2 x 200 mm dimensions (length / width / height) 320 / 200 / 200 cm weight 2000 kg

Condition: ready for operation (used), Year of construction: 2009, overall weight: 2,600 kg, This 3-axis SCHÜCO PDG E CUT was manufactured in 2009. It features a maximum saw blade diameter of 600 mm and operates at a motor speed of 2410 min⁻¹. The machine includes a discharge conveyor belt and an extraction system for efficient operation. If you are looking to get high-quality cutting capabilities, consider the SCHÜCO PDG E CUT double mitre saw we have for sale. Contact us for further details. • Motor speed: 2410 min⁻¹ • Max saw blade diameter: 600 mm • Motor type: M 100, 4 kW • Electrical connection: 3~ 400 V / 50 Hz / 7.7 A • machinable material: Aluminium • Height [mm]: 1870 • Depth [mm]: 2100 • Compressed air: 7 bar • Coverage: 53 • Consumption unit: NL/cycle • Locating hole: 32 mm • Control voltage type: DC • Width [mm]: 7125 • Supply voltage (machine): 400 V • Voltage type (machine): AC • Frequency (machine): 50 • Motor output: 2 x 2.2 kW • Control voltage: 24 V • Max. Cutting length: 5000 mm • Min. cutting length: 350 mm Chjdpfx Afoyv E Edj Ajc • Min. cutting length with software: 270 mm • Execution: 5 m • Angle setting: Via servo motors • Tilt angle (outside): up to 20° • Tilt angle (inside): up to 45° Additional equipment • Discharge conveyor belt (Abtransportband) • Extraction system (Absauganlage), brand: Emmegi

Condition: refurbished (used), Year of construction: 1990, Drum chipper / chipping machine / wood shredder fully reconditioned (workshop-reconditioned) Make: Rudnick & Enners Year of manufacture: 1990 Rudnick & Enners drum chipper, type TH-200/650/3 workshop-refurbished (fully reconditioned) with new bearings (spherical roller bearings) and tested rotor New blades and counter-blades Feed width/height: 650 x 200 mm Rotor diameter: 600 mm Cjdpfezq Sqgex Af Aohc Screen mesh size: 50 x 50 mm Drive power: 75.0 kW Feed motors: 2 x 3.0 kW Weight: approx. 3,500 kg Machine colour: RAL 6011 Reseda green Without electrical installation and without control cabinet

Condition: good (used), Year of construction: 2004, ALUP screw compressor TYPE SCK 31-10/SON 3.12 volume flow 10 bar final pressure 22.0 KW with refrigeration dryer and boiler Chodpfxjwmwpie Af Aec

Condition: good (used), Year of construction: 1980, functionality: fully functional, Automatic edger line Söderhamn (Kockums) Edger 511-A Built approximately 1975-1980, or 2000 With complete 6.2 m x 1.5 m infeed conveyor with automatic centering and motorized feed. Board width continuously adjustable. Feed speed 77-118 m/min Minimum edger width 75 mm Maximum edger width 350 mm Maximum wood thickness 125 mm Fixed saw blade 6 feed grooves Saw spindle speed 1800 rpm Chsdpfsuq N Agsx Af Ajc Maximum saw blade diameter 650 mm Weight with motor and control station 2050 kg

Condition: repair required (used), Year of construction: 1991, Tilting spindle moulder Manufacturer: Panhans Model: 240 Year of manufacture: 1991 The electronic angle value detection (actual value) is not functional. Chjdpfx Afjx Tgtwo Aoc Table: 135 x 80 cm Power: 11 kW Tilting range: -5° to +45° Angle adjustment: Electric Height adjustment: Electric Spindle speeds: 3/4.5/6/9,000 rpm Left/right rotation: Yes Motor brake: Yes Weight: approx. 780 kg Incl. power feed