Conveyor belt with corrugated edge

Mass International NDZ 2 mit Wellkante

Condition: reconditioned (used), Year of construction: 2013, Press container with 20 cubic meters of usable volume for roll-off tipper Aventek RM20 Built in 2013 Lodswifivspfx Aaaehp Several available Repaired, inspected, and serviced Large filling opening Split lid opens left/right Double-sided loading Side-hinged discharge door Ramp operation possible These machines are offered repaired, inspected, serviced, and repainted in the desired standard RAL color. We would be happy to provide a quote including delivery.

Condition: excellent (used), Year of construction: 2023, operating hours: 1,851 h, functionality: fully functional, pressing force: 70 t, filling opening width: 1,100 mm, filling opening length: 1,400 mm, bale width: 1,100 mm, bale height: 750 mm, bale weight: 500 kg, overall weight: 17,000 kg, oil tank capacity: 70 l, Technical data baler: Manufacturer Avermann Maschinenfabrik GmbH & Co. KG, Germany Type AVOS 1410 BS-22/50 Year of construction 2023 Pump operation hours 1,851 hours, as of July 24 Press power main press 70 t (a 70 tonne hydraulic cylinder is installed, special equipment) Lhsdju Thbxspfx Aaasp Specific press force 90,9 N/cm² (a 70 tonne hydraulic cylinder is installed, special equipment) Feed channel 1,400 x 1,000 mm Theoretic cycle time 13 sec Theoretic throughput capacity 266 m³/h Bale size 1,100 x 750 (w x h), the length is variable Drive power 22 kW Connected load 65 kW Tying system 4-fold, vertical, fully automatic Throughput capacity at a bulk weight of 30 kg/cbm approx. 5,5 t/h bulk weight of 50 kg/cbm approx. 7,5 t/h bulk weight of 100 kg/cbm approx. 9,7 t/h Bale weight with a bale length of approx. 1.2 m up to 500 kg, depends on material SPS controller Siemens S7-1500 Operating panel Schneider Harmony Baler dimensions built up 8,610 x 2,400 x 3,835 mm (l x w x h) Transport weight baler approx. 17 t Special equipment: Wear-resistant floor made of HARDOX steel Larger main hydraulic cylinder with 70 tonnes of pressing force Special press ram for pressing loose bulk materials with small grain sizes OptiCut XS system for lower cutting forces and higher throughput rates Special pressing piston for pressing "difficult" materials Technical data for the conveyor belt: Manufacturer Avermann Maschinenfabrik GmbH & Co. KG, Deutschland Type KGF GB 1500 Year of construction 2023 Drive power 4.0 kW Belt speed approx. 0.3 m/second Length feeding conveyor 2,679 mm Length elevating conveyor 6,866 mm Length goose neck 1,272 mm Grade 35° Effecting width 1,400 mm Side wall height 800 mm Carrier height 50 mm Carrier distance 750 mm Belt quality EP 400/3, 3:1 (DIN quality N) Overall height 4,515 mm Overall transport dimensions11,148 x 2,502 mm (l x w) Technical data on the non-contact personal protection system: Manufacturer BOREMA Umwelttechnik AG, Switzerland Type APSS iBOR 22 Year of construction 2023 Condition of the press system: The entire system is in very good condition due to the short operating time of only 1,851 pump hours and the processing of only paper, cardboard and film. Scope of delivery: Avermann baler, type AVOS 1410 BS-22/50, incl. wire drawing stations and bale chute Avermann conveyor belt, type KGF GB 1500 BOREMA personal protection system, type APSS iBOR 22 Comments: The documentation (Manual, CE-declaration, electr./hydr.-drawings), are completely available. Inspections are possible after agreement. We will not assume liability for the given technical data and possible errors.

Condition: good (used), Year of construction: 2012, Packaging machine of a renowned manufacturer. For example, suitable for packaging food (bakery products, bread, cakes, chocolates), bottles, household goods, toys, technical articles, printed and paper products, cosmetics and textiles. Lodpjn Sk H Uofx Aaashp -Display with setting options for sealing time, shrinking time and shrinking temperature. -Maximum package size: length 700 x width 600 x height 250 mm. -Perforation possible by two adjustable needle rings. -Equipped with 2 electric holding magnets for the hood. -2 fans to distribute the hot air. -Roll holder adjustable. -Product insertion adjustable. -Machine adjustable with foot rollers.

Condition: excellent (used), functionality: fully functional, TREIF PHOENIX-CE Lhjdpfx Aasumbt Ajaop ID.NO. 2819 Treif Phoenix-CE Type 3040 Dicing / Shredding machine with many associated tools as shown in pictures. Chamber dimensions 55 x 17 cm H 12 cm. Dimensions 230 x 110 cm Height 180 cm.

Year of construction: 2001, condition: ready for operation (used), Max. weighing range: 1000g, with Weighing Cell Mettler Toledo TF10-L-P, display of weight values, weight classification and automatic sorting of weighed goods. Lodpstqtw Ujfx Aaajhp

Condition: new, Fully automatic palletizing system HYDRA+ cobot palletizer: 👉 up to 20 kg payload (optionally up to 25 kg) and Lhedpfji Emapex Aaasp 👉 up to 2 m palletizing height Depending on customer requirements, we offer different configurations of our palletising system. 💶 For full price details of the Cobot palletiser with 20 kg payload, please refer to the detailed price package (see attached PDF in EN 👉 8136716-2.pdf). The palletizing system includes: → Collaborative robot DOOSAN ROBOTICS Cobot H2017 for up to 20 kg payload; (optionally adaptable up to 25 kg payload with DOOSAN H2515) → Robot base and operating elements → Pallet frame for 2 Euro pallets → FJM suction pad for handling packages, construction as required → innovative palletizer software → individual design according to customer requirements → palletizing system, firmware and software up to date ❗ For logistical reasons, we only deliver within the DACH regions and countries bordering Austria. HYDRA cobot palletiser by FJ Mayer GmbH Developed and programmed by Franz Josef Mayer GmbH Austria. ©Franz Josef Mayer GmbH 2021

Condition: new, Year of construction: 2025, functionality: fully functional, warranty duration: 12 months, DGUV certified until: 09/2026, Flake Ice Maker KF 75 L suitable for built-in installation - Stainless steel construction Ledpfeuiruzox Aaajhp - Daily output up to 80 kg/24 hours - Air-cooled - Refrigerant R 404 A Only with us: DGUV V3 tested Connection: 230V/520Watt Dimensions: 485 x 586 x 720 mm (W x D x H) New machine, SAB tested With warranty & service Options: Water filter Maintenance contract Service package Leasing & rental services We have a wide selection of bakery machines in stock!

Condition: new, Year of construction: 2023, functionality: fully functional, machine/vehicle number: V101VVNG4003ESGR0ZL180W, !! We would be happy to advise you !! Production orientation ////: Vertical Lhedpfxjq Ikg Do Aaaep Conveyor system ////: Feed and discharge optional and dependent on the product Film feed ////: rear Form shoulder ////: fixed Operator display ////: touchscreen with memory function Drives & control ////: 3 servo motors and PLC control Packaging length ////: 50-190 mm Packaging width ////: 50-150 mm (depending on film width) Packaging height ////: dependent on forming shoulder Speed ////: 20-60 bags/min. depending on material, packaging size and product Foil width ////: 100-320 mm Consumption ////: approx. 4KW Power supply ////: 220-240 V / 50 Hz/ 1-phase System weight ////: approx. 210 kg System dimensions ////: approx. 3560 x 1320 x 1500 mm System material ////: approx. 1500 x 960 x 1120 mm System material ////: "304 stainless steel with sandblasted surface treatment" External compressed air required ////: Yes, 6KG/cm³ 85L/min Printer holder ////: matching ink wheel printer optional for an additional charge of EUR 1200 Delivery time ////: Current delivery time under 10 weeks Features: • Stainless steel version also suitable for the food industry • Application for powder, grains, liquids, paste/dough and small parts such as screws • Industries: pet food, cosmetics (soap, shower gel), food (coffee, nuts), metal industry • Simple touchscreen control using color symbols • Print mark sensor included • Automatic stopping for empty products (no product - no bag) • Bag closing system for finished stand-up pouches • Safety protective covers • Can be combined with upstream and downstream machines • Customer-specific changes / designs on request Additional options (on request and for an additional charge): • Stainless steel finish / painting • Zig-zag knife, Euro hole stamp etc. • Automatic stopping for empty products (no product - no bag) • Automatic product feed systems, cyclical insertion systems • Perforation units (tear thread) for easy opening • Gassing units for protective atmosphere (extend product shelf life) • Length-dependent product processing using photocell query

Condition: used, Ulma Atlanta High speed flow packing line possible with shrink film and shrink tunnel. Bottom Seal Lsdpfxoq Dvxxe Aaaohp

Year of construction: 2024, condition: new, machine/vehicle number: KU 2400, The cabbage coring machine provides the ability to cut cabbage core out of the head or more often, crush the stalk (then there is an opportunity to use raw materials 100 percent, it is also useful for the quality of sauerkraut). Combined electric and pneumatic power.​ General Features: Lhedpfjffwfyjx Aaaop All materials that come in contact with products are made from food-grade materials Productivity is up to 2400 heads per hour Two coring lines Can be used to cut irregular shape cabbages also Easy to clean, can be washed with low-pressure water; Can be equipped with wheels with a fixation for easy transportation; Can work separate as well in line with cabbage shredder SS80 7500kg/h Various electrical connections and standards available on request;