5-axis machining center

Matec 30 HV

Condition: excellent (used), Year of construction: 2016, operating hours: 8,737 h, functionality: fully functional, travel distance X-axis: 3,000 mm, travel distance Y-axis: 800 mm, travel distance Z-axis: 800 mm, rapid traverse X-axis: 30 m/min, rapid traverse Y-axis: 30 m/min, rapid traverse Z-axis: 30 m/min, Matec 30HV 3000x800x800 mm Hnedpfx Aoyaa Sfsdwog NC swing head +/- 105° swiveling Heidenhain TNC640 Handwheel Motor spindle 15,000 rpm / 30 kW / 198 Nm Tool holder HSK 63A 48 tool pockets ICS (internal coolant supply) 40 bar Belt filter system 450 liters Air through spindle Oil mist extraction (left and right) Partition wall for pendulum operation Side loading door Prepared for additional NC axis 3D triggering probe Renishaw RMP60 Tool breakage control (laser) Clamping hydraulics 100 bar / 10 l/min 2 x clamping circuits, clamping, releasing, manual and via M-function Robot interface The machine has very low operating hours and has always been perfectly maintained. The complete (maintenance) history is known to us. Tools and vices can be taken over if required.

Condition: excellent (used), Year of construction: 2012, travel distance X-axis: 2,600 mm, travel distance Y-axis: 700 mm, travel distance Z-axis: 700 mm, rapid traverse X-axis: 40,000 m/min, rapid traverse Y-axis: 40,000 m/min, rapid traverse Z-axis: 40,000 m/min, table width: 750 mm, table length: 2,900 mm, table load: 2,150 kg, X - Travel: 2600mm Y - Travel: 700mm Z - Travel: 700mm A - Axis: 360000° B - Axis: - 110 to + 110° Table Length: 2900mm Table Width: 750mm Table load: 2150 Table Ø: 750mm Hnedpfoxuqv Aox Adweg Feed rate X-Axis: 40000mm/min. Feed rate Y-Axis: 40000mm/min. Feed rate Z-Axis: 40000mm/min. Spindle Taper: 40ISO/Bt/Mk Power on spindle: 35kW Speeds / ranges: 18000Rpm ATC / revolver: 30 Coolant through spindle / Bar:20 Number of controlled axis: 5 Chip conveyor: Yes Coolantsystem: Yes Length: 8400mm Width: 3423mm Height: 2620mm Weight: 16000kg Please Note: The information on this page has been obtained to the best of our ability and belief, and from the manufacturers where possible. It is given in good faith, but its accuracy can not be guaranteed. Accordingly, it will not form a representation or constitute contractual terms. We advise you to check any vital details!

Condition: good (used), Year of construction: 2004, functionality: fully functional, travel distance X-axis: 3,000 mm, travel distance Y-axis: 1,000 mm, travel distance Z-axis: 1,100 mm, controller manufacturer: Heidenhain, controller model: iTNC 530, spindle speed (min.): 20 rpm, spindle speed (max.): 12,000 rpm, spindle nose: VDI 40, number of slots in tool magazine: 36, Additional equipment: 4th axis IKZ (internal coolant supply) with 40 bar Hnedox Sv A Sopfx Adwjg Swivel head with 1° increment 3D wireless probe

Condition: ready for operation (used), Year of construction: 2009, Control Unit Brand HEIDENHAIN Model iTNC 530 This 5-axis Matec 30-HV was manufactured in 2009, featuring a versatile universal machining center with a large X-axis travel of 3000 mm and a Y-axis of 600 mm. It includes a high-speed range up to 12,000 rpm, a tool magazine for 36 tools, and a high-pressure cooling system (70 bar). Ideal for complex 3D machining with its powered CNC rotary table and Heidenhain iTNC 530 control. Contact us for more information about this machine. Hnjdpfx Adex D Rggewjg Application Types Milling

Condition: like new (used), Year of construction: 2021, functionality: fully functional, Double spindle CNC lathe with 2 spindles, 3 turrets and 3 Y axes each turret with 15 stations, BMT 44 Hedjvxu Easpfx Adwsng driven tool holder 2x C-axis 3x Y axis Fanuc 32i -TB control Bar passage 65 mm Left spindle 15/11 KW, Hainbuch Spanntop mini Axle pull size 65 Right spindle 11/7.5 KW, Kitagawa three-jaw chuck Finished part gripper Conveyor belt Bar loader interface Coolant system, separate tank 200 l Cooling unit High pressure on turrets 1-3 via M function 15 bar/40 l/min 2x Brinkmann pump Renishaw tool measurement for all turrets Tool monitoring for spindle and AGW Spindle flushing through the counter spindle IKZ, Deublin Rotary distributor Hinged belt conveyor Transformer available immediately

Condition: used, Year of construction: 2006, functionality: fully functional, machine/vehicle number: 0897, travel distance X-axis: 762 mm, travel distance Y-axis: 508 mm, travel distance Z-axis: 508 mm, spindle speed (max.): 18,000 rpm, spindle motor power: 21,600 W, Matec 30 HV/S CNC Machining Center (2006) Heidenhain CNC Controller, Samsys+ Multi-3000 Barstock Loader Coolant Reclaim System, and Chip AugerMatec 30 HV/S CNC Machining Center Heidenhain Control 5-axis Spindle speed up to 18,000 RPM, spindle motor power 29 HP (21.6 kW) tool capacity 24 tools, travel 30 x 20 x 20 inches (762 x 508 x 508 mm) includes SamSYS feeder Under maintenance parts missing Hnodpfsx Ap Hvox Adwog Sublocation - Building 6

Condition: used, Year of construction: 2011, x-travel 4.000 mm y-travel 800 mm z-travel 1.000 mm surface area 835 x 4.500 mm control Heidenhain 530i rotary table Ø 800 / 360 mm/° Hjdpfx Aexx A Niedwjng NC swivel head +/- 105 ° spindle tunring speed 9.000 U/min tool taper SK 40 number of tool places 60 Pos. auto power on hours ca. 41.481 h spindle hours ca. 17.969 h In our assessment, the machine is in good used condition and can be inspected under power by appointment. Technical features & accessories: - NC swivel head - Rotary table - Wireless measuring probe - Direct linear encoder - Internal coolant supply 20 bar Accessories, tools, and clamping devices shown are only included in the scope of delivery if this is noted in the additional information. Technical data and specifications are subject to change without notice. Prior sale is reserved.

Condition: excellent (used), Year of construction: 2014, functionality: fully functional, overall weight: 980 kg, measuring range X-axis: 700 mm, measuring range Y-axis: 700 mm, measuring range Z-axis: 500 mm, Coordinate measuring machine Coord3 ARES NT 7.7.5 Year of manufacture: 2014 Motorized indexable head Renishaw PH10M hand controller: Renishaw MCU LITE-2 Hjdpfx Adeu E U Hbjweng MPEe accuracy: 2.5 µm + L/300 Repetition accuracy: from 2.3 µm Measuring range: 700 x 700 x 500 (mm) Granite bed size: 1330x963.5x170mm Software: TouchDMIS 5.2 + dongle The Z-axis support column is made of silicon carbide, which increases rigidity. DC servo motors, air bearings on all axes, free-floating linear scales with 0.1 µm resolution.

Condition: ready for operation (used), Year of construction: 2000, General Data Machine weight 19000 kg Movement X-Axis Movement 4000 mm Y-Axis Movement 825 mm Z-Axis Movement 1100 mm Table Table load 4000 kg Turret Number of tool slots 48 Media Internal cooling Yes Hnsdpfx Adjx D D D Eoweg Additional Equipment Pneumatically opening doors Partition wall for two-field machining Ventilated measuring systems Optional: High-pressure pump (40 bar) and NC rotary table This 5-axis Matec 30 HV CNC vertical machining center was manufactured in 2000. It features a milling spindle with a speed range of 20-9,000 rpm and a drilling capacity in St 60 of 60mm. The machine boasts large travel distances with X-axis at 4000 mm, Y-axis at 825 mm, and Z-axis at 1100 mm. It supports a maximum table load of 4000 kg. If you are looking to get high-quality milling capabilities consider the Matec 30 HV machine we have for sale. Contact us for more information. Application Types Milling

Condition: used, Year of construction: 2004, x-travel 3.000 mm y-travel 1.000 mm z-travel 1000 mm Hnjdpfx Adexx A Ncoweg surface area 1.035 x 3.500 mm control Heidenhain 530i round table Ø500 mm / 360° mm/° NC swivel head +/-90 ° spindle tunring speed 9.000 U/min tool taper SK 40 number of tool places 48 Pos. auto power on hours ca. 27.834 h spindle hours ca. 12.357 h In our assessment, the machine is in good used condition and can be inspected under power by appointment. Technical features & accessories: - NC swivel head - Rotary table - Wireless probe - Direct linear encoder - Internal coolant supply 40 bar Accessories, tools, and clamping devices shown are only included in the scope of delivery if specifically stated in the additional information. Technical data and specifications are subject to change without notice. Prior sale is reserved.

Condition: excellent (used), Year of construction: 2017, functionality: fully functional, Mikron / GF HPM 450 U WPC with Pallet Changer About the machine: High-precision 5-axis simultaneous milling machine with 7-position pallet changer (WPC). Excellent condition, extensive equipment! Very low spindle hours! Technical data: - Heidenhain ITNC 530 HSCI - X-axis: 600 mm - Y-axis: 450 mm - Z-axis: 450 mm - B-axis: +45° / -120° - C-axis: 360° - Spindle speed range: 20,000 rpm - Spindle drive: 23 / 30 kW - Torque: 91 Nm - Tool holder: HSK 63 - Pallet size: 280 x 280 mm - Max. pallet load: 150 kg - Number of tool magazine pockets: 60 - Max. tool diameter: 90 (130) mm - Max. tool length: 200 mm - Max. tool weight: 6 kg - Tool change time: 3 sec. - Feed force X-Y-Z: 5 kN - Rapid feed X-Y-Z: 22 m/min - Acceleration X-Y-Z: 5 m/s² - Rapid traverse B-axis: 50 rpm - Rapid traverse C-axis: 140 rpm Accessories: - 7 pallets, including 6 pallets with clamping devices (see photo) - Electronic handwheel - Infrared measuring probe - Laser tool measurement - Direct path measuring systems - APS Advanced Process System - ITC Intelligent Thermal Control - rConnect Live Remote Control (1 year) - KinematicsOpt - CT 60 tool magazine - DYNAFIX 7-position pallet changer - SIGMATEC 15 / 900 cbm/h oil mist extraction system - Tool blow-off device - Blowing air at the spindle carriage - Blowing air through the spindle center - Internal coolant supply 18–70 bar Hnodpfsx Hx Rhsx Adwog - Paper band filtration system - Chip conveyor - Spindle oil cooler Machine dimensions L x W x H: 6600 x 4000 x 2800 mm Weight: approx. 8,600 kg An inspection/test under power onsite is of course possible. We are not your average machine dealer – here, you will be advised by a CNC expert! We are happy to offer you transport, installation and setup, as well as commissioning and a machine training session, all performed by our own technicians. Everything from one source: Baumgärtner CNC GmbH & Co.KG is a company specialized in: - Service - Maintenance - Overhaul - Automation of DMG machines and other well-known manufacturers. We support you! From machine purchase, through transport and installation, to commissioning and subsequent maintenance or repair work, you can rely on us.

Condition: ready for operation (used), Year of construction: 2010, Movement X-Axis Movement 3000 mm Y-Axis Movement 600 mm Z-Axis Movement 800 mm B-Axis Movement ±105° C-Axis Movement 360° Additional Equipment Turning Package: Enables high-precision turning operations in combination with standard milling, facilitating turning and milling in a single setup. Hjdpfex D Dy Hox Adweng This 5-axis Matec 30 HV mill-turn centre was manufactured in 2010. It features a traveling column with 3,000 mm X-axis travel, 600 mm Y-axis, and 800 mm Z-axis. The B-axis swivels ±105° and the C-axis rotates 360°, supporting complex geometries. Equipped with a Bosch Rexroth IndraMotion 10 control unit and a rotary table speed of 500 RPM, it enables precise turning and milling operations. For more information about this mill-turn centre, please reach out to us. Application Types Milling

Condition: ready for operation (used), Year of construction: 2007, operating hours: 14,136 h, Control Unit Brand HEIDENHAIN Model iTNC530 Main Drive Spindle speed range 15000 Hnsdpfx Adjx D Ix Tewjg Spindle motor power 16 kW Tool taper HSK 63 Number of axis 4 Movement X-Axis Movement 1300 mm Y-Axis Movement 600 mm Z-Axis Movement 800 mm Table Table load 400 kg Tools Number of index 36 Type of tool holder SK40/DIN 69871 or HSK 63-A Media Chip conveyor Yes This 4-axis Matec MATEC 30 HV/K was manufactured in 2007, featuring a robust vertical machining center design. It includes a Rexroth control, a standard spindle with a speed range of 20-15,000 rpm, and a maximum torque of 100 Nm. The machine offers a tool changer with a capacity of 36 tools and a machine table that supports up to 400 kg. If you are looking to get high-quality milling capabilities consider the Matec MATEC 30 HV/K machine we have for sale. Contact us for more information. Application Types Milling

Condition: used, Tool presetter EZSET EZ400 Hedpjuhb Stofx Adwjng

Condition: ready for operation (used), Year of construction: 2016, operating hours: 18,759 h, Control Unit Brand HEIDENHAIN Model TNC 640 Main Drive Spindle speed range 15000 Tool taper HSK-63 Number of axis 5 Hodpfx Adex D Rdxowong Movement X-Axis Movement 3000 mm Y-Axis Movement 800 mm Z-Axis Movement 1100 mm This 5-axis Matec 30 HV universal machining center was manufactured in 2016. It features a 60-position tool magazine, 15,000 rpm spindle, and Heidenhain TNC 640 control. Additional highlights include a rotary table, spindle cooler, and an extensive cooling system with a 510-liter tank. If you are looking to get high-quality milling capabilities, consider the Matec 30 HV machine we have for sale. Contact us for more information about this machine. Application Types Milling