WIG welding machine, electrode welding device, electric welding machine

MESSER GRIESHEIM Uniwig GW 280 AC/DC

Condition: excellent (used), Here we offer a Heraeus heat and air circulation drying oven. Heraeus heating and air circulation drying oven up to 300 ° C Manufacturer / type: Heraeus UT 6060 Properties: Temperature: 300 ° C Net volume: 52 litres Weight (empty): 53 kg Internal dimensions: Depth 403 mm, width 340 mm, height 380 mm Ihjdpfx Asd Hpv Ajdwjt External dimensions: Depth 744 mm, width 535 mm, height 552 mm Nominal voltage 230 v, rated frequency 50/60 Hz, rated current 6,8A, output 1, 50kW Including 2 deposits Type: UT 66060 Condition: pre-owned / used Scope of delivery: (See image) (Errors and omissions in the technical data, information are reserved!) We can answer questions on the phone for you.

Year of construction: 2013, condition: ready for operation (used), A Rehm Invertig Pro 350 AC DC and a Rehm Invertig Pro 450 DC are available, used and in good condition. 1) Invertig Pro 350 AC DC, standards: IEC 60 974-1 IEC 60 974-2, welding current range TIG: 3-350A, output voltage U₂ at maximum current: approx. 24V, open circuit voltage U₀: approx. 91V, duty cycle 100 percent for TIG at 350A, mains voltage input: three phase 400V 50Hz, protection class: IP23S, protection category: S, setting range: 3-350A for TIG in this AC DC version, duty cycle 100 percent at 40°C 350A for TIG 100 percent duty cycle, input fuse protection: 32A at 3x400V for the 350 AC DC version, length: 520mm, width: 360mm, height: 460mm, weight: 29.5kg for AC DC version. 2) Invertig Pro 450 DC, standard: IEC 60 974-1, welding current range TIG: 3-450A, output voltage U₂ at maximum current: approx. 28V, open circuit voltage U₀: approx. 91V, duty cycle 100 percent at 450A TIG, lower for electrode welding approx. 60 percent, mains input: 3x400V 50Hz, protection class: IP23S, duty cycle at 100 percent 450A TIG at 40°C, electrode welding current approx. 360A at 100 percent duty cycle for electrode in the 450 DC version, input fuse protection: 32A at 400V three phase for 450 versions, length: 520mm, width: 360mm, height: 460mm, weight: approx. 28kg. An on-site inspection is possible. Ihsdpfx Aoxddamedwst

Year of construction: 2010, operating hours: 29,000 h, condition: excellent (used), Category: Twin-screw extruder Number: DE27699 Manufacturer: Coperion - Werner & Pfleiderer Type: ZSK 50 MCC+ Year: 2010 Screw diameter: 2 x Ø 50.0 mm L/D: 48:1 Motor: 129 kW Details: Co-rotating, segmented screws and barrel, vacuum pump, temperature control unit, 2x side feeders, 1x side degassing The extruder is in very good condition and has only 29,000 operating hours. Iodpsxykcgefx Adwjht Options: 7-fold dosing system from Motan Colortronic, dryer (Motan LA 1200/4), IPS strand extraction, strand conveyor belt, water bath, granulator, vibrating screen. All options are available immediately at extra charge. This offer does not meet your requirements? Please visit our website Plama or send us your detailed enquiry. We offer suitable equipment for almost every budget.

Condition: used, functionality: fully functional, Multi-function welding machine (MIG, TIG, electrodes) Brand: Kemppi Model: Pro 3000 / Promig 500 Water-cooled unit with Kemppi PRO Cool 10 chiller. TIG/electrode welding unit Kemppi PRO TIG 410 - Kemppi TL control panel - Functions for TIG welding: pre-gas, post-gas, arc, high frequency TIG generator Kemppi Pro 3000 MIG/wire welding unit Kemppi PRO MIG 500 - Duty cycle: 500A - 60% - Kemppi ML SYNERGIC control panel - 4 feed rollers - Pulsed arc current with Synergic panel - Dedicated functions for welding steel, stainless steel and aluminum Includes: - TIG welding torch - MIG welding torch - Earth cable - Gas regulator Ijdpfx Adexf Hv Hswjht

Condition: used, Technical details: power consumption: 240 A voltage: 3x400 V open-circuit voltage: 91 V power consumption: 9,3 kVA weight of the machine approx.: 28 kg dimensions of machine: 1,0 x 0,6 x 1,0 m Welding rectifier (inverter) TIG (steel/VA) and manual electric welding Direct current TIG = up to 240 A / 19.6 V Electric welding = up to 240 A / 19.6 V 2/4-cycle switchover, stepless switchover to pulse Ihjdpfxju U Iixs Adwot Protection class IP 23 Water-cooled and frost protection Shielding gas / solenoid valve Gas-cooled torch head with remote control for welding current Equipment: Hose package 7.4 meters Ground clamp and ground cable 4.2 meters *

Condition: as good as new (ex-display), Fronius TPS 3200 ✅ Scope of delivery: ➤Fronius TPS 3200 power source (320A TRANS PULS SYNERGIC) ➤Fronius FK 4000 FC cooling unit – Equipped as standard with Flow Control, Thermocontrol, and a coolant filter. The cooling unit shuts off if the water cooling fails or overheats to protect the hose assembly. These features cost approximately €400 more from Fronius. ➤Fronius VR 7000 wire feed case – Compact and practical – in our opinion, the most useful feed case – the wire is safely stored in the enclosed case. ➤Fronius long intermediate hose package – each device is delivered with a 5-meter-long connecting hose package between the power source and the wire feed case for greater flexibility and better handling. Take the wire feed case with you to places that are difficult to reach! The connecting hose assembly is neatly attached to a hook on the side of the device. (Hooks are manufactured by us.) ➤ Large Fronius trolley – Arguably the best trolley with a gas cylinder holder on the market. ➤ Binzel hose assembly – With up/down amperage adjustment on the torch. ➤ Ground cable 3-4m ➤ New Messer pressure regulator ➤ New basket spool adapter for large wire spools This device can weld almost all materials, including aluminum, steel, and stainless steel (V2A). It features feeler wire programs and is also suitable for MIG brazing (Cusi), which is frequently used in the sheet metal industry. Additional options are available for an additional charge. e.g., Fronius Job Master hose package (display on the torch) + EUR 500.00 ----- IMMEDIATELY AVAILABLE PROPER INVOICE A viewing is possible in Austria in Vienna 1230! ✔ Insured shipping on a pallet is no problem! ✔ We can also be reached via WhatsApp and Viber. Iodpewbilxjfx Adwoht ✅Questions✅Questions✅Questions✅ Questions: ✅Questions✅Questions✅ Questions✅ ►►►What is the condition of the devices? To explain, we buy like-new used devices, disassemble them, check everything, replace any wear parts if necessary, and only then, after a successful test weld, are they released for sale. "All" devices are clean and have neither burn holes in the displays nor countless burn holes or dents scattered throughout the device! You're buying an item from us that's ⭐worth seeing and doesn't look completely finished! ►►►Do we receive an invoice when we buy from you? Yes, we provide a proper invoice. If you have a valid VAT ID, we can issue a net invoice if the requirements for intra-community delivery within the EU are met. ►►►What payment options are available? Advance payment or cash upon personal pickup ►►►Why buy from us? We are experts in this Fronius welding machine series and always have 60-80 devices in stock – exclusively Fronius, no other manufacturers! We are experts in these devices and don't sell anything we don't know anything about.

Condition: used, Year of construction: 2010, operating hours: 76,256 h, functionality: fully functional, Equipment: type plate available, Frequency-controlled compressor Ihedpfowvac Rox Adwot New oil and filters Compair Type: L22SR-7,5A V2 Volume flow: 3.53 m³/min Pressure: max. 10 bar Motor power: 22 kW Year: 12/2010 Operating hours: 76,256 Weight: 355 kg A suitable refrigeration dryer and 2000L compressed air tank can be purchased separately. The machine can be demonstrated under power on site. All information provided without guarantee. Errors and interim sale excepted.

Condition: ready for operation (used), Year of construction: 2010, functionality: fully functional, WE Flexmaster 400 laser welding machine Year of manufacture: 2010 Laser unit TruDisk 3302, Trumpf company Cooling unit P805-17640, Termotek company Material: black sheet metal and stainless steel sheet Sheet thickness: 0.6 - 2.0 mm Ihodsv Ipcfjpfx Adwet Pipe diameter: 80 - 600 mm Pipe length: 100 - 1250 mm

Condition: as good as new (ex-display), FRONIUS MAGICWAVE 5000 AC DC Scope of delivery: ➤ Fronius MagicWave 5000 (500A) ➤ Fronius FK 4000 water cooling unit ➤ Fronius TIG hand welding torch ➤ Fronius trolley Ihsdpfx Asxhd Tujdwet ➤ Ground cable 3-4m ➤ Pressure regulator

Condition: ready for operation (used), Year of construction: 1998, MIG-MAG welding system Ijdpewx Hz Ejfx Adwsht Set welding current: 50 - 400 A Max. welding current at 45/60/100% duty cycle: 400/345/265 A Open circuit voltage: 16.5 - 45 V Standard wire feed for steel: 1.0 + 1.2 mm Wire feed speed: 1 - 20 m/min Electrical connection: 380 V Weight: 164 kg Space required: 950 x 550 x 850 mm