Tool cutter

MIOTAL® WFM 400M

Condition: refurbished (used), Year of construction: 1988, Ingramatic RP1V: M6x75/40 mm. 230-600 ppm. Also available with Washer. Completely overhauled to new. Machine visible in Calolziocorte (LC). OVERHAUL TO CE STANDARD. Overhaul includes: - DISASSEMBLY AND CLEANING OF EACH OF ITS PARTS - REPLACEMENT OF ALL BEARINGS - GRINDING GUIDES OR EVENTUAL REPLACEMENT IF NOT IDONEE - OVERHAUL OF INTRODUCER GROUP - OVERHAUL OF SLIDE ASSEMBLY WITH REPLACEMENT OF LARDONS IN BRONZE - NEW LUBRICATION SYSTEM WITH CONTROL UNIT HYDRAULIC UNIT COMPLETE WITH PUMP, LEVEL SWITCH, PRESSURE SWITCH AND DIVIDERS - NEW WATER PUMP FOR COMB - NEW Ø670 CUP VIBRATOR COMPLETE WITH PANEL VIBRATOR CONTROL AND PHOTOCELL FOR OVERFLOW - REVISED ROLLER EVACUATION UNIT - PROTECTIVE CASING COMPLETE WITH LAMP AND MICRO - SOLENOID VALVE INSTALLATION WITH NEW AIR SYSTEM FOR VIBRATOR AND GUIDES - NEW ELECTRICAL SYSTEM ACCORDING TO CE STANDARDS COMPLETE WITH INVERTER - NEW MOTOR - BELTS REPLACEMENT - PAINTING RAL FROM YOU INDICATED Nkjdsh Riuuopfx Adwot

Condition: used, Year of construction: 1969, grinding length 500 mm grinding width 200 mm workpiece height 250 mm total power requirement 5,5 kW weight of the machine ca. 2500 kg dimensions of the machine ca. m J U N G Horizontal High Precision Surface- and Profile Grinding Machine Model HF 50 RD, Year 1969, partially reconditioned in 2021 Serial-no. 4082 _____ Grinding length max. 500 mm Grinding width max. 200 mm Nsdpfet Hwziex Adwekt Table size 600 x 200 mm Grinding height under grinding wheel approx. 250 mm Table cross travel approx.. 230 mm Table slide cross stroke 0,2 - 8 mm/table stroke Table longitudinal travel max.. 550 mm Table speed longitudinal 1 – 20 m/min. Measurement of grinding wheel 225 x 25 x 51 mm Grinding wheel speed infinitely adjustable 1.000 - 4.500 rpm Vertical feed 0.001 - 0.01 mm/stroke Grinding spindle drive infinitely variable load 0,4 – 1,5 kW Total electrical load 5,5 kW - 380 V – 50 cycles Weight approx. 2.500 kg Accessories/Special Features: • Due to the infinitely variable speed range of the grinding wheel this design is especially suited for grinding of high alloyed steels and carbide, hardmetal, etc. • Set up switches for plunge-in or normal pendular-grinding with automatic infeed • Automatic infeed of grinding slide during surface- and/or profile grinding, (plunge-in cut)with automatic stop of infeed by contact-Gauge. • motorized rapid feed of grinding head up/down • Manual straight grinding wheel-dressing device mounted above the grinding wheel • Manual Table mounted, swivable magnetic chuck make BRAILLON size 400 x 200 mm • separate converter cabinet for infinitely variable speed regulation and with respective display of cutting speed in m/sec. • Wet grinding facility including coolant tank and bandfilter cleaning device, separate standing, • Including 3 separate flanges, some grinding wheels, service tools, etc. Condition : good – can be inspected here under power, partially reconditioned by a JUNG Specialist (table pistons, lubrication, infeed system, Dresser, covers, etc.) Delivery : ex stock – as inspected Payment : net– after completion of contract

Condition: excellent (used), Year of construction: 1998, x-travel 800 mm y-travel 600 mm Nsdjx Dndcepfx Adwskt z-travel 500 mm

Condition: used, max. wheel diameter 180 mm gear width 45 mm max. module 4 Nodpfx Adou Uu S Tjwokt min. module 0,5 stroke length max. 0 - 52 mm spindle taper innen MK 4 table diameter 160 mm table bore diameter 75 mm no. of strokes 355 - 630 Hub/min feed range 0,008 - 0,4 mm/Hub dimensions of the machine ca. 2,30 x 1,50 x 2,36 m power capacity 6 kW weight of the machine ca. 2.500 kg Year of construction: Approx. 1970

Condition: good (used), Year of construction: 2009, Ref. -No.: 10616 Manufacturer: DMG Type: DMU 210 P Year of construction: 2009 Type of control: CNC Control: Heidenhain ITNC 530 Storage location: Halberstadt Country of origin: Germany Machine-No.: 257XXXX X-Travel: 1800 mm Y-Travel: 2100 mm Z-Travel: 1250 mm B-Axis: -30 / +180 ° C-Axis: 360 ° Table Load: 8000 kg Nkodpfx Ajx R R Hcjdwet Clamping Area: 1.700 mm Tool Taper: SK 50 Spindle Speed: 10.000 RPM Max. Torque: 288 Nm Total Power Requirement: 38 kW No. Of Working Stations: 60 Internal cooling: 40 bar Holding torque: 22.700 Nm Further information: - The DMG DMU 210 P 5-axis machining center is suitable for high-precision machining of large, heavy workpieces. The machine can be viewed under power.

Condition: used, Year of construction: 2007, reus 8000 min-1 U/min Weight 5500 kg Year 2007 Nedpfx Adjwm Rqaswekt Control Siemens 840D Dimensions (L/W/H) 3600 x 2800 x 2400 mm travel -x axis 1035 mm travel -y axis 560 mm travel -z axis 510 mm

Year of construction: 2010, condition: ready for operation (used), A twin-spindle turning and milling center Mazak is available. Travel X/Y/Z: 580mm/160mm/1545mm, B-axis: 225°, C-axis: 360°, center distance: 1500mm, max. turning diameter: 660mm, swing diameter over bed: 660mm, speed main spindle/counter spindle: 5000rpm, tool stations: 40+9, coolant pressure: 70bar. Machine dimensions X/Y/Z: approx. 5200mm/2550mm/2600mm, weight: approx. 14000kg, spindle hours: 24679h. Including high-pressure coolant, SMW steady rest, SMW chuck, steady rest integration, Renishaw probe, measuring probe, CAD/CAM software Topsolid 7.18, oil skimmer, postprocessor and Inspection-Plus package. The machine was mainly used for finishing. Documentation available. An on-site inspection is possible. Nkjdpox Ih Dgofx Adwjt

Condition: reconditioned (used), Year of construction: 2009, CNC Vertical Machining Center HERMLE C 1200 V Equipped with Heidenhain iTNC 530 CNC control Year of manufacture: 2009 Travel ranges: X 1200 mm, Y 900 mm, Z 500 mm Njdjx Hhctspfx Adwekt Speed range: 20 – 10,000 rpm, stepless (HSK 63) Includes the following accessories: - Fixed angular table, clamping surface 1260 mm x 800 mm - Vertical tool changer with 30 magazine slots (HSK 63) - Internal coolant supply, 40 bar - Air blow-off device - Scraper belt conveyor - Rotating clear-view window - Coolant system - Electronic thermal compensation, iTNC 530 - Electronic hand control module HR 410 - 3D measuring probe, Heidenhain - Switch cabinet cooling unit (RITTAL) - Oil mist extraction - Various HSK 63 tool holders, equipped with tools - Spindle oil cooler - Chip flushing gun - 4 height-adjustable machine feet - Operating manuals

Condition: like new (used), Year of construction: 2005, operating hours: 48,898 h, functionality: fully functional, travel distance X-axis: 1,000 mm, travel distance Y-axis: 1,000 mm, travel distance Z-axis: 1,000 mm, controller manufacturer: Heidenhain iTNC 530, workpiece weight (max.): 2,000 kg, total height: 3,400 mm, total length: 6,000 mm, total width: 4,500 mm, rotational speed (min.): 30 rpm, overall weight: 15,800 kg, spindle speed (min.): 18,000 rpm, number of slots in tool magazine: 40, Year of construction: 2005 Nkjdpsxur Sxofx Adwst CNC controller: Heidenhain iTNC 530 Axes X-axis travel mm: 1000 Y-axis travel mm: 1000 Z-axis travel mm: 1000 C-axis degrees: 360º (0,001) A-axis degrees: 130º B-axis degrees: 0-190º Feed rates m/min: 60 Rapid traverse m/min: 60 Milling/turning table nc: Number of pallets: 1 Table dimensions mm: Ø1100x900 Max. workpiece weight kg: 2000 Table rotation speed rpm: 30 Spindle Spindle speed rpm: 18000 Cooling Cooling through the Spindle Center bar: 40 Tank capacity: 980 High-pressure bar: 40-80 Tool system Tool holder: HSK-A 63 Tool magazine slots: 40 Tool changer: Double gripper Equipment Electronic Handwheel Chip conveyor Infrared probe Rinsing gun blowing air through spindle center selectable via M-function Laser tool measurement for measuring tool length and diameter 3D quickSET Ready for internal cooling (40/80 bar) Paper band filter Machine running times Under power: 144180 Spindle Working: 48898 Rated power kVA: 65 Basic machine dimensions / weight Length mm: 6000 Width mm: 4500 Height mm: 3400 Weight kg: 15800

Condition: used, Year of construction: 2006, x-travel 800 mm y-travel 700 mm z-travel 550 mm Control Heidenhain TNC 530 Njdpfx Adoxiy Answekt