Used 2 Locker for sale (36,433)

Condition: excellent (used), Screening and sorting machine for bulk materials or small metal components. Very good condition – complete, equipped with original drive, control cabinet, and a set of calibration screens. • Manufacturer: SCHWANOG Günter KG, Villingen / Schwarzwald • Model: RAPID SBM 63G • Year of manufacture: 1972 • Drive: Bauknecht motor 0.55 kW, 380/220 V, 2850 rpm • Control cabinet: Carl Kurt Walther GmbH, Wuppertal • Robust steel construction, stable frame with transport wheels • Power supply: three-phase 400 V • Complete set of screening sieves in wooden frames (numbers 1–6) • Sieve mesh range: from 2 mm to 15 mm • Adjustable and exchangeable screens • Main switch, start/stop controls, and overload protection • Very good condition – dismantled from the plant, mechanically fully functional The machine is ready for operation after a basic inspection. Ideal for: metalworking shops, foundries, industrial laboratories, sorting granulates, sand, or components. Isdpfexmt Eqsx Adwsht

Condition: excellent (used), Catalogue number 7757 TECHNICAL DATA Milling machine - Spindle diameter: 25mm - Spindle height: 120mm - Interchangeable spindle, tiltable 20 degrees Ihsdpfx Adsx Tgtdswot - Spindle locking - Height adjustable (up/down) - Original guide fence - Table dimensions: 1120x750mm - 4 spindle speed settings - Motor: 3.8 kW Circular saw - Max blade diameter: 350mm - Spindle axis: 30mm - Blade adjustable (up/down and angle) - Spindle locking - Cutting width at fence: 540mm - Cast iron table - Dimensions (L/W/H): 1260x900x1000mm - Weight: 610kg ADVANTAGES – Made in Poland – DTR documentation available – Used milling machine, very good condition Net price: 6900 PLN Net price: 1640 EUR (based on exchange rate 4.2 EUR) (Prices may vary with exchange rate fluctuations)

Year of construction: 2019, condition: used, Sharpening machine for TCT bandsaw blades Forestone 2 Ihodpfxjyabv So Adwet

Condition: excellent (used), load capacity: 2,000 kg, Height-adjustable welding positioner, load capacity 2 tons, with infinitely extendable clamping extensions and clamping claws included. Condition: very good. Speed, height, and tilt are infinitely adjustable. Hand and foot remote control. Welding current transmission: 600 amps. Dimensions: Length: 1940 mm, Width: 1200 mm, Table diameter: 1200 mm. Height when tilted: min. 700 mm, max. 1550 mm. Height horizontal: min. 900 mm, max. 1700 mm. Weight: 1750 kg. Ihjdpfx Ajx Tif Aedwjt

Condition: good (used), Introma ZD-2 SR Wire Stitcher The machine is in very good condition and ready to use. This is the current production model. Technical specifications: Capacity: 180/min Sewing thickness: max. 25mm Wire diameter: max. 1mm Power supply: 230V Weight: 230kg The machine has an adjustable table for block and booklet stitching. Side and front margins. Instructions included. Ihjdpfx Ajx N I N Esdwot

Condition: excellent (used), Year of construction: 2020, Nucleus Version: DX100 Depth [mm]: approx. 2000 mm Length [mm]: approx. 5400 mm Height [mm]: approx. 1990 mm Weight [kg]: approx. 1200 kg Ijdsxzpc Uepfx Adweht Year of manufacture: 2020 Height above floor: min. 4 mm, max. 200 mm Main voltage: 400 V ± 10%, 50/60 Hz, 3 phases, N, PE Power consumption: 8 kW Fuse: 25 A Nlobluw Djxznxuexcei Air pressure: 6 bar Welding pressure: 510 N Welding power: 1000 W Welding speed (depending on drive): Standard motor: max. 30 m/min Weld width: max. 12 mm Noise level: LpA < 80 dB(A) Sound pressure emission at the workplace (Noise measured according to DIN 45 635-48-A-1, ISO 11204, ISO 3744, ISO 4871) The Nucleus DX200 is used for manufacturing three-layer welded masks. The machine is a complete production line and includes three material feeders, one wire dispenser, and two units where the material is folded, cut, and welded.

Condition: excellent (used), For sale: a complete, professional magnetic particle testing (MT/NDT) kit from the renowned brands Tiede and Blak-Ray, used in industrial quality control, welding, rail transport, and the energy sector. The equipment is fully operational and in very good technical and visual condition—ready for immediate use. The set includes: • Tiede FSM-2 – magnetic field strength meter (Feldstärkemessgerät), measuring range ±400 A/cm, 9 V DC power supply • Blak-Ray J-221 – professional long wave ultraviolet meter for UV lamp verification in NDT applications • Field Indicator MAGNAFLUX – magnetic field indicator for quick induction checks • Measurement probe with cable • Calibration specimen and auxiliary accessories • Glass cylinder for indicator fluid Iodpfx Adjxl Dbtswjht • Original transport case with protective foam Applications: • Weld seam inspection • Shaft, axle, and machine component examination • Testing of railway, energy, and aviation parts • Quality control in industrial production

Condition: excellent (used), CATALOG NUMBER 6024 Ijdpfx Aex R Dv Rsdweht TECHNICAL DATA - Main motor: 2.9kW - Spindle motor: 0.75kW - Carriage feed motor: 0.75kW - Power supply: 380V - Dimensions (L/W/H): 1600x1100x1200mm - Weight: 891kg Machine equipped with: – 2 tables measuring 300x340mm – Pneumatic clamps – Tables adjustable in two angular planes – Capability for producing longitudinal and round tenons on the tables – Mechanically adjustable table speed and spindle rotation speed – Tables adjustable up/down – Tenon width adjustment Net price: 16,900 PLN Net price: 4,020 EUR Net price calculated at an exchange rate of 4.2 PLN/EUR (In case of major exchange rate fluctuations, the price may change)

Condition: used, Year of construction: 2012, functionality: unexamined, power: 1,500 kW (2,039.43 HP), nominal heat output: 3,000 kW (4,078.86 HP), heating capacity: 3,000 kW (4,078.86 HP), Selling complete boiler technology with 2 boilers ELBH with silo for biomas chips. Buyer have to arrange disassembly on site. Seller arrange crain, liftruck, full support on site + technical support. Iodpox Idkpsfx Adwoht

Condition: used, empty load weight: 4,600 kg, maximum load weight: 13,390 kg, overall weight: 18,000 kg, axle configuration: 2 axles, first registration: 05/2000, loading space length: 6,700 mm, loading space width: 2,500 mm, suspension: air, wheelbase: 5,130 mm, Year of construction: 2000, Height: 1.12 m Technically in good condition Year of manufacture: 2000 Iodpfsw Srz Nsx Adwsht

Condition: good (used), Baumann BSB-2 Paper Jogger The machine is 100% functional and ready to use. Technical specifications: Maximum format: 640×920 mm Stack height: 160 mm Weight: 350 kg Power supply: 400 V Isdox Nczvepfx Adwjht Air table Tilt angle adjustment

Condition: used, - Tamis Giratoire Iodpfx Adex Rz I Rjweht

Condition: excellent (used), • Type: SK40-2/20-70 (DIN 69871) • Taper: SK40 • ER collets included (various diameters, complete set) • Tools mounted in holders – drills, milling cutters, counterbores (visible in the photos) • Holder length: 70 mm • Set ready for use – just mount in your CNC machine • Condition: used, very good, complete (minimal signs of wear) • Individual pieces or the whole set available for purchase • Price per item. Iedpfx Aexa H H Uedwjht

Condition: excellent (used), CATALOG NUMBER 7855 Technical specifications: - Spindle diameter: 40mm - Spindle working height: 160mm Isdpfx Aex Ifbvedweht - Interchangeable spindle - Spindle locking - Height adjustable up/down - Original cast iron fence with full adjustment - 4 spindle speed settings + forward/reverse: 3000, 4500, 6000, 9000 rpm - Table dimensions: 1520x1000mm - Extendable table support - With side carriage for tenoning - Carriage with height adjustment - Electric brake - 3-roller power feed - Number of speeds: 4 - Forward/reverse rotation - Power feed motor: 0.65 kW - Main machine motor: 5.9 kW - Extraction port diameter: 3x120mm - Overall dimensions (L/W/H): 2030x1250x1400mm - Weight: 1100kg ADVANTAGES – Made in Poland – Top-mounted control panel – With side carriage for tenoning – 3-roller power feed – DTR technical documentation included – Not repainted – Used spindle moulder, in very good condition Net price: 16,900 PLN Net price: 4,020 EUR Net price calculated at 4.2 PLN/EUR exchange rate (Price may change in case of major exchange rate fluctuations)

Year of construction: 2001, condition: excellent (used), Weishaupt GL 30/2-A dual fuel burner -Version Z: Output 300-2150KW: year of construction:2001 Oil throughput 40-180 kg/h With existing fittings Dungs DN50 Мы говорим по русски! Ihedpfx Ajf Src Rjdwjt Visits please only after telephone arrangement! Preferred sale to dealers, tradesmen or export. All information without guarantee, errors and prior sale reserved. The seller is not liable for typing and data transmission errors. Gladly we take your used boiler or burner in purchase! Of course we also take care of all formalities Loading possible

Condition: new, Year of construction: 2025, load capacity: 2,000 kg, 3-axis rotary and tilt positioner, 2000 kg load capacity, clamping plate diameter 0.8 meters. Proven in the fields of construction and agricultural machinery, commercial vehicles, industrial trucks, as well as in aerospace and energy technology. Suitable for welding, assembly, machining, etc. Featuring a stable and robust design, flexible positioning across three axes (including overhead), and easy operation, these positioners simplify welding, assembly, and handling of large workpieces. Advantages: - Faster production, increased productivity - Optimal workpiece positioning improves weld quality and allows for higher deposition rates - Enhanced safety; dangerous crane handling is significantly reduced - Positioning on up to three axes simultaneously without cumbersome re-clamping - Simple operation and ergonomic design protect and relieve the operator Ihodpfx Adoxbhp Hjwot - Flexibility through modular adaptability and custom special versions available Operating principle: The rotary arm axis is positioned above the clamping plate, so the rotary arm acts as a counterweight to the workpiece. As a result, these machines are much more powerful than standard rotary-tilt tables or rotary-tilt positioners. This principle enables the handling of the specified loads in any position. Endless rotation of the two rotary axes and additional height adjustment allow for all workpiece orientations (including overhead). Turntable speed is infinitely variable from 0.05 to 0.6 rpm. 2000 kg load capacity. - Wireless hand remote control - Continuous 360° rotation - Continuous 360° tilting - Stroke: 1000 - 1500 mm - Arm reach radius: 1.2 meters

Condition: good (used), Polar Mohr RA-2 Jogger with roller and scale The machine is in perfect condition, ready to work. Isdjwt Sqhepfx Adweht Technical data: Max format: B2+ Stack height: 150mm Weight: 450kg (jogger) + 150kg (weighing device) Power supply: 400V Air squeezing roller Air table Possibility of shaking to the right/left Adjustable angle of inclination Adjustable shaking frequency (on the inverter) Adjustable force and speed of the air squeezing roller. Chrome table surface The machine is additionally equipped with a Bizerba sheet weighing system that allows for counting sheets on the machine, taring, packaging, etc.

Condition: used, Year of construction: 2000, functionality: fully functional, Sale possible from calendar week 04. Blasting system with extraction unit. Dismantling and loading carried out by the seller. Transport to be arranged by the buyer. Sale only within the EU. Ihsdpfxjx S H Aio Adwet

Condition: excellent (used), Precision CNC tool presetting and measuring device from renowned manufacturer KELCH – model Trabant 271-2/M. Equipped with a length and diameter measuring system featuring optics and a KELCH Pico LCD A23 monitor, as well as Heidenhain ND1202T Tool-Chek electronics. Very good condition, complete and fully operational unit. Technical specifications and features: • Manufacturer: KELCH GmbH + Co. Werkzeugmaschinenfabrik, Germany • Model: Trabant 271-2/M • Year of manufacture: 2000 • Measuring unit: KELCH Pico LCD (Version A23) • Display system: Heidenhain ND1202T Tool-Chek • Power supply: 230V / 50–60Hz / 1000 VA • Optical system with measuring camera and LCD screen • Rotary table with holders and two-axis adjustment system • X/Z axis measuring range: up to approx. 400 mm • Axis control from KELCH control panel (joystick + function keypad) • Digital readout, menu in German and English • Complete with original documentation and all connectors Condition: • Used, fully functional • Very clean example from a German toolmaking shop • All axes move smoothly, screen responds correctly • Ready for work Functional description: The KELCH Trabant 271-2/M is designed for fast and precise presetting of cutting tools prior to mounting in CNC machines. The optical system with Pico LCD display allows for measurement of tool length, diameter, and geometry in visual mode. Ideal for inspection and presetting of milling cutters, turning tools, drills, and special tools. Iodpfsxn Ax Ajx Adwjht

Condition: as good as new (ex-display), Remark: This is a II. Wahl product, new product unused. II. Wahl means there may be dust deposits, minimal scratches or dirt or dirt may be present. Technical data for the unit carrier: Manufacturer: SSI Schaefer Rack system: R 3000 Included in delivery are: 02x shelf beams, II. choice (new goods) Material color: sendzimir galvanized Type: KTRZ 31036 Ihjdpfen Hqq Rjx Adwst Z-profile: 60 x 40 x 12 mm clear width: approx. 994 mm perforated grid: approx. 53 mm agraffe: 3 HK (hooks) weight | pcs.: 1,700 kg max. load per truss pair 200 kg with evenly distributed load 02x unit truss, II. choice (new goods) material color: sendzimir galvanized total length: approx. 780 mm clear span: approx. 715 mm dimension: approx. 40 x 35 mm (WxH) material thickness: approx. 1,50 mm 01x wooden shelf, II. choice chipboard width: approx. 985 mm chipboard depth: approx. 717 mm material depth: 22 mm Your contact persons in our company: Mr.: Andre Evering Mr.: Mario Klöver Mr.: Falk Deutsch General information about the item: This item is offered for pickup only. A desired transport or shipment of this or a shipment of this article is associated with additional costs, which can be requested separately depending on the delivery location or scope of delivery can be requested from us.

Year of construction: 2008, condition: excellent (used), Dual fuel burner Weishaupt RGL50/2-A -version ZM-NR Power 600-5400KW: Year:2008 Oil throughput 95-453kg/h With existing fittings Dungs DN65 Shipping possible worldwide. Inspection please only after telephone arrangement! Preferred sale to dealers, traders or export. All information without guarantee, errors and prior sale reserved. The seller assumes no liability for typing and data transmission errors. Ihodsf S A Sgepfx Adwet Gladly we take your used boiler or burner in purchase! Of course we also take care of all formalities Loading possible

Condition: good (used), Year of construction: 2004, only approx. 45 million impressions, Plus Version, CPC control with integrated register, Alcolor, Autoplate, Baldwin dampening circulation and cooling, blanket washing device, pull mark control, ultrasonic double sheet control, sheet decurler, Mediprint powder unit Iodjx R Tgrspfx Adwoht

Condition: good (used), Polar Mohr RA 2 jogger with Roller The machine is 100% functional, in very good condition. This is the latest design from a German manufacturer, currently in production. Ihedpewxtabsfx Adwst Technical data: Max format: B2+ Stack height: 150mm Weight: 450kg Power supply: 400V Air squeezing roller Air table Possibility of shaking to the right/left Adjustable angle of inclination Adjustable shaking frequency (on the inverter) Adjustable force and speed of the air squeezing roller. Chrome table surface Documentation

Condition: ready for operation (used), Year of construction: 2002, functionality: fully functional, For sale: Two high-precision CNC lathes TRAUB TNK 36 (years of manufacture: 2002 and 2003) in operational condition. These machines are renowned for their reliability in precision manufacturing and can be jointly inspected at the Freiburg location. • Double offer: Two identical machine models are available (YOM 2002 & 2003), which is ideal for redundant manufacturing processes or expanding production capacity. • Condition & operation: Both machines are fully operational and have been used in a professional manufacturing environment. They can be inspected and tested under power. • Accessory package: The machines come with a comprehensive set of accessories including tool holders, collets, and guide channels for a bar feeder. • Flexibility: Equipped with main and counter spindles (both with C-axis) and two tool turrets, the machines enable complex machining, including secondary operations on the rear side. IMPORTANT NOTE REGARDING SALES (PACKAGE DEALS): I offer extremely attractive package solutions for these machines: 1. TNK Duo: When purchasing both TNK 36 units (YOM 2002 & 2003), you will receive an unbeatable special price. 2. Complete package (3 machines): If these two TNK 36 are purchased together with the also advertised INDEX TRAUB TNL 32-7 (YOM 2014), I guarantee an outstanding overall deal! With a complete purchase, I will also include substantial extras: several chip trolleys, various tools, and workbenches—everything you need to quickly set up a manufacturing cell. - Location: 79115 Freiburg (DE) - Availability: The machines can be demonstrated under power and are available immediately. - Scope of delivery: Includes tool holders, collets, and complete documentation. Technical specifications (per machine): • Year of manufacture: 2002 / 2003 • Control: TRAUB TX8i (high-precision 2-channel control) • Working area: Bar capacity up to Ø 36 mm • Spindles: Main and counter spindle (up to 6,300 rpm & both with C-axis) • Tool turrets: - Upper turret: 12 tool positions • Front/lower side: 7 positions (optimized for secondary/rear machining) • Peripheral equipment: Prepared for chip conveyor and coolant system (details onsite). Price: On request (attractive package deal when purchasing 2 or 3 machines) Ihodpjx Sr Iwefx Adwot

Year of construction: 1998, condition: excellent (used), Dual fuel burner Weishaupt RGL40/2-A -version ZM-NR Power 500-3450KW: Year:1998 Oil throughput 55-290kg/h Iedpfxjhl Inmo Adwsht With existing fittings Dungs DN65 Shipping possible worldwide. Мы говорим по русски! Viewing please only after telephone agreement! Preferred sale to dealers, traders or export. All information without guarantee, errors and prior sale reserved. The seller assumes no liability for typing and data transmission errors. Gladly we take your used boiler or burner in purchase! Of course we also take care of all formalities Loading possible