Used 3D Scanner for sale (1,943)

Condition: excellent (used), functionality: fully functional, machine/vehicle number: 3009F459805, Year of construction: 2021, operating hours: 1,514 h, total length: 1,120 mm, total height: 740 mm, total width: 1,070 mm, overall weight: 211 kg, table width: 1,120 mm, table length: 1,070 mm, MJP 2500 Plus, lightly used. Complete with post-processing oven supplied by the manufacturer and an uninterruptible power supply (UPS). Last inspection: January 2024. The machine has been tested and is fully functional (see images and videos). Suitable for use with biocompatible and sterilizable materials certified by 3DSystems. A list of compatible materials and the technical data sheet are attached. Kedpfexdx Ekex Aanenf

Condition: new, Year of construction: 2022, Ultra-fast 3D plastic printer Ultra-fast 3D plastic printer (growing volume 275x155x400 mm) for industrial use and learning environments, with fast material exchange and a wide selection of more than twenty print materials. Challenge the speed and quality of injection molding and take advantage of the superior flexibility without tools! Whole metalprinting system including: - Printer 3D plastic printing - x-Wash Product washing - x-Cure Hardening of printed parts NexaX v1 Software Easy print handling and remote control, job listing, queues and statistics This is a full system including the 3D-printer, wash station, and the curing device. Materials: KeyGuide, KeyModel Ultra - Ivory, KeyModel Ultra - Light Gray, KeyOrtho IBT, KeySplint Hard, KeySplint Soft, KeyTray, PRO9499 White, Saremco Print CROWNTEC, xABS3843, xDENT341-Beige, xESD, xFLEX402-Black, xFLEX475-Black, xFLEX475-White, xMODEL15-Black, xCERAMIC3280, xDENT201-Gray, xDENT341-Beige, xESD, xFLEX402-Black, xFLEX475-Black, xFLEX475-White, xMODEL15-Black, xMODEL15-Gray, xMODEL17-Clear, xMODEL35-Black, xMODEL35-Gray, xMOLD, xPEEK147, xPP405-Black, xPRO1100-Black, xPRO9400-FR Knedjtucr Ispfx Aanof

Condition: ready for operation (used), functionality: fully functional, Year of construction: 2014, printer was rarely used at university which does not use it any more Knjdpfjw Inrcox Aansf

Condition: used, Year of construction: 1909, 3D Systems ProCure 750 Used to cure 3D-printed parts in an automotive manufacturer's development department. Knsdpsv Upuuofx Aanef All the lights are lit and the turntable is rotating.

Condition: new, 3D welding table 1000x1000x900, perforated table, grid 100, 28mm - NEW (prices vary - please enquire!) TECHNICAL PARAMETERS OF THE TABLES Sturdy construction, Highest processing quality Flatness of the table [+/- 0.5 mm per meter] Material S355J2+N* Table top thickness 15mm Hole system 28 in 100x100mm grid Rows of holes in the side panels Chamfered holes for easy tool assembly Height adjustment with standard legs approx. 880-930 mm Side panel height 200mm Available models - 1x each TWT.15.100100 1000x1000 Weight: 240 Load capacity: 2000 - net 1220€ Knsdpfju Hgnasx Aanof TWT.15.120120 1200x1200 Weight: 395 Load capacity: 2000 - net 1565€ TWT.15.150100 1500x1000 Weight: 420 Load capacity: 2000 - net 1680€ TWT.15.200100 2000x1000 Weight: 488 Load capacity: 2000 - net 2105€ TWT.15.240120 2400x1200 Weight: 642 Load capacity: 3000 - net 2578€ Further details and pictures on request. The amount stated is net. The statutory VAT of 19% will be added at checkout. You will receive a proper invoice with VAT shown.

Condition: ready for operation (used), functionality: fully functional, Year of construction: 2013, 3D Systems Projet 3500HDMax 3D Printer - bought in 2013, good condition, functional. Knedpfx Aaownbd Honjf

Condition: excellent (used), functionality: fully functional, We offer a highly productive 3D printer for industrial series production. Trumpf TruPrint 3000 G02 with the options Zirox Sensor, Single Laser, and Powder Bed Monitoring. Trumpf TruPrint 3000 including filter system. Serial number: S0721Q0022 Laser performance: Laser beam on 17,508 hours. The system was finally used with aluminum AlSi10MG. The 3D printer has already been disassembled by the manufacturer. Disassembly and functional reports are available, proving that the machine was in operation before disassembly. All axes are properly secured. The machine can be transported on a standard truck. Accessories: 4 dosing containers 1 construction cylinder 1 overflow container Various spare parts such as protective glass, etc. Manuals The Armanni CAR.Elev pallet truck. A container changer is also in stock and can be offered as an option. Fast to high-quality 3D components D1. Machine concept The TruPrint 3000 is a universal medium-format machine with external parts and powder management for the industrial production of complex metal components using 3D printing. Its large build volume offers high flexibility in terms of the size, quantity, and geometry of the respective application. Technical specifications TruPrint 3000 Build volume (cylinder) mm x mm Ø 300 x H 400 Processable materials5 - Weldable metals in powder form, such as: stainless steels, tool steels, aluminum, nickel-based, cobalt-chromium, copper, titanium, or precious metal alloys. Build rate 6 cm3/h 5 - 60 Layer thickness 7 μm 20 - 150 Laser source (TRUMPF fiber laser) W 500 Beam diameter μm 100 - 500 O2 concentration ppm 100 Exposure speed (powder bed) m/s 3 Monitoring - Condition monitoring, performance monitoring. Option: Powder bed monitoring. Preheating (substrate plate) °C 200 Shielding gas - Nitrogen, argon Knodovu Ticjpfx Aansf Power supply V / A / Hz 400 - 32 - 50/60 Dimensions (incl. filter) mm 3385 x 1435 x 2225 Weight (incl. filter) kg 4300 Subject to change. The information in our offer and order confirmation is authoritative. Technical data TruPrint 3000 Table 3

Condition: used, functionality: fully functional, Year of construction: 2014, The printer was rarely used and was located at a university. It is no longer in use. Knedpfow Inpnsx Aansf

Condition: used, functionality: limited functionality, Year of construction: 2013, Projet 3500HD Max 3D printer, in need of maintenance. Kedpfx Aaownbcijnjnf

Condition: repair required (used), functionality: limited functionality, Year of construction: 2013, Printer Projet 3500HD Max 3D printer, maintenance necessary and in need of repair. Knsdpfx Aajwnbb Esnef

Condition: as good as new (ex-display), Year of construction: 2026, functionality: fully functional, CMS Smartline 2040 Demo Machine - Available in May 2026 Axis-Movement: X-Axis: 4.000 mm Y-Axis: 2.000 mm Z-Axis: 150 mm Knedex Ic Adjpfx Aansf included options: - 1x 5-axis cutting head with automatic taper compensation - Height sensor with anticollisionsensor - Software IGEMS - Abrasivtank and automatic abrasive doser High Pressure Pump Jetpower Evo Power consumption: 29 kW Electric connection: 400 V +/- 5% / 50 Hz Max. Pressure 4.150 bar Water flow rate: max. 2,8 ltr. / min

Condition: ready for operation (used), Year of construction: 2015, functionality: fully functional, We offer used SCANNER HS5000 for use on RISO CC3110/3150/7150/9150 Kjdoq Npgyjpfx Aanonf 4 SETS OF RISO HS-5000 SCANNER IN STOCK. We offer used SCANNER HS4000 for use on RISO CC3010/3050/7050/9050 2 SETS OF RISO HS-4000 SCANNER IN STOCK. WE OFFER PARTS FOR RISO MACHINES ANY TYPE SCANNER PRICE ON THIS ADD IS PER UNIT The set of any scanner is coming with the following configuration: • 1 X Riso HS-5000 or HS-4000 • 1 X STAND (TABLE) • 1 X POWER CABLE • 1 X USB CABLE Condition: This offer contains used devices, which may show signs of use. (Minor scratches or yellowing may apply on the devices). General: - The devices are complete and working well. Tested. - We can ship it worldwide, after secure its systems inside and store it on a 1 euro-size pallet 80cm X 120cm. - For EU countries we can issue zero VAT invoice. Please ask for quotation. - For non EU countries please ask for quotation. For any other information, you also can contact us .

Condition: good (used), Year of construction: 2020, operating hours: 200 h, functionality: fully functional, total width: 700 mm, total length: 800 mm, total height: 2,297 mm, type of input current: AC, You will find this and other machines that were part of our shipping line in our listings. If you are looking for a complete solution in this area or require several components, please feel free to contact us and we will get back to you promptly. Brief overview of the shipping line and where the listed item was used: The shipping line was designed for pallet shipping, meaning cartons were erected (SOCO ATS 2300 + 2200) and sealed at the bottom for packing along the main shipping line. The finished packages were then top-sealed using a carton sealer (SOCO T-4200) and passed on to a labeler (LOGOPAK LOGOMATIC 415-T). After the Logomatic scanner verified the packages as error-free, they were handed over to the palletizing robot (SOKO PRS-LRS-1218-H3) to create a pallet packed according to our specifications/dimensions. Our video demonstrates the entire shipping line in operation. The item offered here is the LOGOMATIC 415-T labeler from LOGOPAK (circled in blue in the layout diagram). Summary of all relevant technical data for the LOGOMATIC 415 T labeling system: • Machine type: LOGOMATIC 415 T. • Print resolution: 300 dpi (12 dot). • Cycle performance: Maximum 20 products per minute. • Operation: HMI (10-inch color LCD display) in German. • Signal light: 3-color status light (red, blue, green) included. • Frame: Standard frame with stainless steel spindle feet (±50 mm adjustable). • Certification: CE certified (EU). • Mains voltage: 230V AC / 50 Hz (L,N,PE). Supply voltage should not fluctuate more than ±5% and be free from interference. • Power consumption: Maximum approx. 1400 VA. • Electrical connections at installation site: 1x Schuko socket for the labeler and 1x Schuko socket for maintenance purposes. • Compressed air: 6 bar, dry and oil-free. Air supply must be permanently installed up to approx. 1 meter before the device. • Compressed air consumption: Approx. 250 l/min. • Compressed air connection: ½ inch fixed line with FESTO quick coupling KD4-½-A and coupling plug KS4-CK-6. • Temperature: Ambient temperature for the labeler should be between +5°C and +37°C. For processing PE labels, a temperature of 25°C is recommended. • Applicator stroke length (net): 350 mm, defines the working area for different carton heights. • Labeling height: 800 mm (standard setting). • Orientation: Horizontally standing for top labeling. • Label unwind/carrier take-up: For rolls up to 600 m running length. • Label core adapter: 152 mm (6 inches). • Current format (Amazon): 60 mm width x 40 mm height. Knodpsxdcv Hjfx Aanjf • Future shipping label: Approx. 100 mm width x 200 mm height. The above specifications can be adjusted depending on required label sizes. • Label gap: 8 mm. • Printing method: Thermal transfer. • Label material: Paper labels (Economy TT paper). • Ribbon (TTR): Wax quality. • Interface: Ethernet (10/100 Mbit). A serial RS-232C port is also available. • Data protocol: ZPL (Zebra). • Data source: Host system. • Data transmission: Print data is sent from a PC to the labeler via Ethernet.

Condition: good (used), flat gear motor, gear motor, electric motor, electric gear motor, worm gear motor Knjdpfx Aast E D Rhonsf -Manufacturer: SEW-Eurodrive, gear motor parallel shaft gear unit series F -Type: FA27/II2GD EDRS71M4BE1/3D/KCC/TF/AL -Gearbox:Type FA27/A/II2GD i= 50.19 -Speed: 1375/27 rpm -Power: 0.37 kW -Protection class: IP54 -Hollow shaft: Ø 25 x 100 mm -Dimensions: 390/200/H395 mm -Weight: 17 kg

Condition: used, Year of construction: 1978, machine/vehicle number: 27309654, x-travel:1600 mm y-travel:1000 mm z-travel:1300 mm size of plate:1.500 x 800 x 120 mm capacity Y-axis:175-1210 mm capacity Z-axis:0-810 mm digital readout:Grundig 3-achs-Digimeß digital readout:235 x 80 x 130 mm total power requirement:0,04 kW weight of the machine ca.:2 t dimensions of the machine ca.:2,0 x 1,5 x 1,63 m Knodpfx Aecxxwroanjf 3-D coordinate-measuring machine with caste precision plate fine-scraped, with 4 feet 2000 x 1500 mm, approximately 20 different marking and testing probes, equipped with STIEFELMAYER type "A" guidance system

Condition: as good as new (ex-display), Year of construction: 2011, operating hours: 2,500 h, functionality: fully functional, machine/vehicle number: ----, working range: 4,500 mm, travel distance X-axis: 4,000 mm, travel distance Y-axis: 2,000 mm, travel distance Z-axis: 250 mm, workpiece weight (max.): 8,000 kg, type of input current: AC, input voltage: 400 V, sheet thickness aluminum (max.): 150 mm, table length: 4,500 mm, operating speed: 20,000 mm/s, table width: 2,400 mm, tank capacity: 8,000 l, pressure: 4,150 bar, positioning speed: 40 m/min, rapid traverse X-axis: 40 m/min, rapid traverse Y-axis: 20 m/min, rapid traverse Z-axis: 15 m/min, table height: 1,100 mm, operating pressure: 4,150 bar, warranty duration: 3 months, input current: 60 A, cutting speed: 20,000 mm/min, travel speed (max.): 40,000 mm/min, year of last overhaul: 2024, overall weight: 6,000 kg, power: 44.13 kW (60.00 HP), Water cutting machine from showroom. 2 head water cutting machine CMS Tecnocut Easyline 1 2D head with 250 mm Z-axis range 1 head 3D with 150 mm Z-axis range, A-axis range +/- 274 degrees, B-axis +/- 62 degrees, full 3D control , no 2.5D like many other machines Fully interpolated heads, so controlled via CNC and not manually coupled Cutting range: Kedpfxeq U Irme Aanjnf X-As: 2,000 mm Y-As: 4,000 mm Z-As: 250 / 150 mm A-As: +/- 274 degrees B-As: +/- 62 degrees Options: - 5-As cutting head - extra 2D cutting head - Chain discharge for abrasive - Anti-collision sensors on both heads More details / official quotation on request 60HP Jetpower EVO pump with as much as 5 L/min capacity ( liters bring cutting speed ) max pressure 4150 bar. We are since 13 years official CMS dealer Perfectly maintained and technical condition 100% Machine will be delivered in new condition, pictures are during last use We give 6 months warranty on this machine Rent / Lease / all in lease is also negotiable

Condition: as good as new (ex-display), Year of construction: 2026, functionality: fully functional, CMS Smartline 2040 Demo Machine - Available in May 2026 Axis-Movement: X-Axis: 4.000 mm Y-Axis: 2.000 mm Z-Axis: 150 mm included options: - 1x 5-axis cutting head with automatic taper compensation Kodpfexxldcsx Aanenf - Height sensor with anticollisionsensor - Software IGEMS - Abrasivtank and automatic abrasive doser High Pressure Pump Jetpower Evo Power consumption: 29 kW Electric connection: 400 V +/- 5% / 50 Hz Max. Pressure 4.150 bar Water flow rate: max. 2,8 ltr. / min

Condition: used, Standard base for welding table, table base, table base for welding tableWelding and assembly tables -Manufacturer: Demmeler, standard foot for welding table 2 pieces -Type: 3-D -Pendulum feet: finely adjustable -Mounting countersunk screw: M24 -Price/Delivery: complete -Total dimensions: Ø 90 / 635 mm Knodot Hy T Ijpfx Aanjf -Weight: 8.1 kg/piece

Condition: excellent (used), Year of construction: 2021, PROLINE 2040 Axis-Movement: X-Axis: 4.250 mm Y-Axis: 2.000 mm Z-Axis: 200 mm included options: - 1x 5-axis cutting head with automatic taper compensation - Height sensor with anticollisionsensor - Software IGEMS - Automatic tank cleaning with dredge - Abrasivtank and automatic abrasive doser Ksdogb Rklopfx Aansnf

Condition: as good as new (ex-display), Year of construction: 2020, operating hours: 700 h, CMS Tecnocut Easyline like new Cutting Area / Axis Movement X-Axis: 2.000 mm Y-Axis: 4.000 mm Z-Axis: 150 mm C-Axis: Optional B-Axis: Optional Options: - 5-Axis cutting head - additional cutting head Knjdpfxotq Eh Ds Aanof - Sanddoser - Dredge for abrasive - Antikollisionsfeeler - CAD/CAM IGEMS

Condition: new, Year of construction: 2024, functionality: fully functional, machine/vehicle number: Micro 3D L570V, travel distance X-axis: 700 mm, travel distance Y-axis: 600 mm, travel distance Z-axis: 500 mm, rapid traverse Z-axis: 30 m/min, rapid traverse X-axis: 30 m/min, rapid traverse Y-axis: 30 m/min, rotary table diameter: 500 mm, table load: 300 kg, Description General Data Micro 3D L570V is 5-Axis Mold Texture Laser Processing Machine Tool. - Ability to process metal wire drawing, 3D texture, fine texture, leather texture, microstructure, etc. - Laser texture processing accuracy up to 0.01mm - Simplify your process and achieve infinite repeatability Movement Kedpfx Ajvfmbtsanonf X-Axis Movement 700 mm Y-Axis Movement 600 mm Z-Axis Movement 500 mm Swivel range A: +110 / -110 ° Rotatable C: 360 ° Workbench: Table diameter 500 mm Processing diameter (5 axis) Max. 600mm Processing height (5 axis) Max.350mm Workpiece weight (5 axis) 300 kg Lasers Nanosecond(Optional) ≥ 50W Femtosecond(Optional) ≥ 20W

Condition: ready for operation (used), Year of construction: 2021, This EVO-tech EL-102 V2 was manufactured in 2021. A plastic 3D printer featuring a robust 400 VAC system, it operates efficiently within a temperature range of 5–35 °C and humidity levels of 20–85% RH. It adheres to safety with IP41 protection and CE marking. Consider the opportunity to buy this EVO-tech EL-102 V2 plastic 3D printer. Contact us for more information. Knsdpfox D Sicjx Aanjf Application Types 3D Printing

Condition: excellent (used), Year of construction: 2007, For sale is a Dimension BST 3D printing center with serial number P1588. The center was used as a test center Interior component Table 203x203x305 mm Knjdpjh Uc Iqofx Aansf Nozzle head computer controlled Material cassette automatically reloadable Technical data Dimension dimensions 686x1041x914 (WxHxD) Weight 136 kg Max construction volume 203x203x305 Electrical connection 230V, 60hz, 15A Accessories: - power cord - 20 material cassettes - instruction manual - Basic training manual - Div Software - 29 Table tops Prices plus VAT Viewing possible by appointment. Contact us, our team is happy to help you. Trade-in or exchange possible!

Condition: used, functionality: fully functional, Year of construction: 2018, total length: 2,400 mm, total height: 2,945 mm, total width: 1,300 mm, type of input current: AC, overall weight: 2,900 kg, input voltage: 400 V, laser power: 3,000 W, One of the best model of the 3D metal printer model on the market. High tech, very accurate and fast, can print stainless and titanium. Made for aerospace manufacturing, but capable for other industries as well. Machine type: 3D printer Manufacturer: GE Additive Model: Arcam EBM Q20plus Year of construction: 2018 Kodpfx Ajvmpq Teansnf Condition: used Functionality: Fully functional Price 79000.- eur, loaded on truck. Best price you ever can buy such level printer. Packed into manufacturer boxes, ready to ship. Data from manufacturer: Max. build size 350 x 380 mm (Ø x H) Max. beam power 3kW Cathode type Single crystalline Min. beam diameter 140 μm Max. EB translation speed 8,000 m/s Active cooling Water-cooled heat sink Minimum chamber pressure 5 x 10-4 mbar Typical build atmosphere 4 x 10-3 mbar (partial pressure of He) He consumption, build process 4 l/h He consumption, ventilation 100-150 l/build Power supply 3 x 400 V, 32 A, 7 kW Size approx. 2,400 x 1,300 x 2,945 mm (W x D x H) Weight 2,900 kg CAD interface Standard: STL Materials: Arcam EBM Ti6Al4V Grade 5, P-Mtrl Arcam EBM Ti6Al4V Grade 23, P-Mtrl

Condition: ready for operation (used), Year of construction: 2014, operating hours: 1,520 h, General Data Measurements width 1200 mm Ksdpfex Hblzjx Aanonf Measurements depth 1050 mm Measurements height 2000 mm Main Drive Laser power 2.5 kW Spindle speed range 14000 1/min Spindle motor power 14 kW (100% ED) Tool taper HSK64 Number of axis 5 Movement X-Axis Movement 650 mm Y-Axis Movement 650 mm Z-Axis Movement 560 mm Table Outer length 800 mm Outer width 650 mm Tools Slots in storage 60 Type of tool holder HSK64 Media Oil water separator Yes Chip conveyor Yes Internal cooling Yes Additional Equipment Inner cooling system 40 bar, 23 l/min Scraper belt chip conveyor with coolant system 600 liters, paper belt filter Infrared measuring probe Renishaw OMP 60 Version for SK 40 (the probe is automatically inserted into the work spindle from the tool magazine) Rinsing gun with pump 2 bar/40 l/min Oil/emulsion mist separator Tool measurement in the Blum Laser work area MPC Machine Protection Control & 3D quickSET Surcharge for powder feeder Twin System Suction unit with secondary filter stage electronic handwheel Siemens 840D Machine was upgraded to new machine status by DMG in 2020 and then delivered. This DMG MORI LASERTEC 65 3D Hybrid 5-axis precision machine for milling and laser machining was manufactured in the year 2014 in Germany. It is special for the ability to produce components using 3D Printing and to post-process them at the same time. Ideal for manufacturers who need a high-performance additive manufacturing solution of metallic 3D components. The machine features a fixed integration of the laser head in the headstock for greater installation space and more performance. In addition it offers 5-axis material application via coaxial nozzle for uniform powder distribution regardless of the laser build-up direction. It is the ideal dedicated solution for prototypes, small series, repair and coating. This LASERTEC 65 3D is equipped with an integrated SK 40 motor spindle with spindle speed up to 14,000 1/min. In addition it operates with a fiber-guided diode laser of 2.5 kW laser power. Next to internal coolant supply (IKZ) it comes with Renishaw measuring probe and Blum tool measurement option. Furthermore it is appreciated for its generously sized work area that is easily accessible, along with travel dimensions of 650 × 650 × 560 mm (X / Y / Z). It is a supremely adaptable 5-axis machine suitable for a wide array of laser and milling tasks, delivering consistently high-quality results without compromise. Application Types Milling