6
number of spindles 6
spindle passage 32 mm
turning length 152 mm
Speed 200-2800 U/min.
turning diameter 32 mm
feed Werkstoff: 254 mm
Vvlb0a
Accessories:
multi edge turning, univ. thread cutting attachment,
Strehleinrichtung, chip conveyor, 1 set collets, set of change wheels
7
number of spindles 6
spindle passage 50 mm
turning length 178 mm
max. material feeding 254 mm
speeds 2x17: 117 - 1460 U/min
pre-settable workpiece times 4,9 - 394 sec
switching time 2,9 sec
boring of tool-holders 50,8 mm
main drive motor 22 kW
weight of the machine ca. 11 t
dimensions of the machine ca. 6 x 1,5 x 2,3 m
Electric 380 Volt
Collet devices
Feed change gears ( div. )
Chip conveyor
Cam-controlled 6-spindle automatic lathe with 50 mm spindle passage and 3 m bar
feeder with ...
4
number of spindles:6
spindle passage:16 mm
Article: cam-controlled multi-spindle automatic lathe
Manufacturer: Gildemeister
Type: GM16-6
Yob: 1991
six main spindles
for bars up to D=16mm
9zvly7w
This is not a current, regular GM16. 6 pieces of this series have been manufactured. Most parts are identical to GS/GM20. The machine was built in 1991, has a clutch for thread cutting, gripper with rear machining and a chip screw. A Giovanni Cucci loading magazine is attached. However, the bar guides ...
15
Schütte multi-spindle automatic lathe SF 32-6 DNT
Proj. No. 000371 Year 1991
6 spindle automatic bar lathe
in DNT design (with servo drive for cycle time and speed)
max. bar capacity 32,0 mm for bars up to 3.30 m
incl. bar guide and stand
- 1 set of curves for cross slide
- 1 set of curves for longitudinal slide
B7zjyx3wlr
- pick-up device
- additional feed in position 2 and 4
- thread cutting gear
- thread rolling device with Fette T 27 thread rolling head
- revolving drilling device for off-ce...
4
6-spindle-automatic lathe
brand: INDEX
type: MS25E
new in: 1996
equipped with: subspindle
barfeed
Bqjfgr0q
6
Six-spindle automatic lathe , bar feed, tube and tube bundle , conveyor , pick-up spindle , threading clutches
Pue2v
13
still to come in detail
B8jehrsqs8
4
turning diameter 60 mm
turning length 200 mm
number of slides
total power requirement 20 kW
weight of the machine ca. t
Rck2uligy
dimensions of the machine ca. m
6
max. material dia. max. 52 mm
turning speeds max. 5.000 1/min
Qrtb9
2.800 1/min
output at 25 % ED 44 kW
max. torque at 25 % ED 150 Nm
Control Siemens C200-4D
number of spindles 6
total power requirement 400V/50Hz/3kVA
5
number of spindles:6
spindle passage:81 mm
Article: cam-controlled multi-spindle automatic lathe
Manufacturer: Schütte
Type: SF81
Yob: 1987
six main spindles,
for bars up to D=81mm
B2jksuoguk
gripper (currently not mounted, enclosed)
bar guide for approx. 4,000 mm bars
electronic trip dog control Balluff
threading clutches
coolant pump, Additional coolant pump
various accessories, such as cams, change gears, tool holders, clamping and feed collets, etc.
video link:
Please, contact us for ge...
8
Catalog No. : 3514
Type: SAS 8/160
B8u0eszajs
Producer: ZPS
Made in: 1986
Characteristic:
Number of spindles: 8
Turning Diameter: 165 mm
Turning length: 300 mm
Machine dimensions: 3950x2165x2000 mm
Machine weight 13800 kg
10
number of spindles 6
spindle passage max. 52 mm
turning length max. ca. 180 mm
control C 200-4D Index
Workingspindle:
number of spindles 6 pos.
max. bar capacity 52 mm
Max. rpm 5.000 min/-1
power capacity 29 kW
max. Torque 138 Nm
Swivable-Synchronous-Spindle:
Ccb8bnt28o
Max. rpm 6.000 min/-1
power capacity 5,7 / 7,2 kW
max. Torque 18 / 23 Nm
Swivel Angle Synchronous-Spindle 132 °
slide travel Z-axis 190 mm
Backside processing 3 pos.
Tool holder 1:
Number of tool stations 12 pos.
travel -...
7
Machine type:
Index MS 18 C
Manufacturer:
INDEX
Model:
MS 18 C
Year of manufacture:
2004
Condition:
good (used)
Year of manufacture:
2004 / IB 2008 demonstration machine from 2008 at the seller in production.
Manufacturer:
Index
Type:
MS 18C
Control system:
INDEX C200 with double NCU
Country of origin:
Germany
Operating hours:
77.090 | 51.502
Cc2jnz08ja
Spindle count:
6
Bar diameter max. mm:
18
Speed range n-1:
Irlemmksq
10.000
Total connection kVA:
67
Bar feeder:
Iemca SIR MS 18 33P
L max mm:...
7
number of spindles 6
spindle passage 32 mm
turning length 100 mm
max. material feeding 176 mm
speeds 17: 260-2400 U/min
pre-settable workpiece times 54: 5 - 205 sec
main drive motor 15 kW
22kqywaz
weight of the machine ca. 8,2 t
dimensions of the machine ca. 5,6 x 1,4 x 1,8 m
Condition: ready for operation
Video available on our website.
Electric 380 Volt
Chip conveyor
Collet devices
Cam-controlled 6-spindle automatic lathe with 32 mm spindle capacity and
3 m bar feed with stand, t...
11
2005
good condition (used)
Qty 2 x 1" x 6 Servo Drive Variable Feed & Speed Multispindle Lathe with Siemens PLC and Cucchi Automatic Bar Loaders Year 2005
Price €70,000.00 each
Qty 3 x 13/4" x 6 Servo Drive Variable Feed & Speed Multispindle Lathe with Siemens PLC and Cucchi Automatic Bar Loaders Year 2005
Price €85,000.00 each
All machines with attachments and toolholders
Ccqqfgecop
5
number of spindles:8
spindle passage:51 mm
Article: multi spindle automatic lathe
Manufacturer: Schütte
Type: AF51
Yob: 1987
eight main spindles
max. bar diameter D=51mm
Noscpne
control SIEMENS SIMATIC S5
pick up in pos. 7, for rear machining
thread cutting drive
independent feed in positions 2/3
electronical trip dog control ?Balluff?
clear text display Wöhrle
coolant pump
magnetic cartridge filter
oil running
incl. bar loader IEMCA PRA 40/37/F, yob 1987, (bundle type)
Painting in light blue ...
4
Catalog No. : 3515
Type: SAS 8/160 P1
Producer: ZPS
Made in:
Characteristic:
Cpgtbcby
Number of spindles: 8
Turning Diameter: 165 mm
Turning length: 300 mm
Machine dimensions:
3950x2165x2000 mm
Machine weight: 13800 kg
5
Machine with only one card needing to be replaced.- Estimated cost for repair: 2.000 euros
Automatic feeder Mini Boss 325 CNC
B9dsv9uqxf
6
8-spindle-automatic lathe
brand: SCHÜTTE
type: AF51
new in: 1995
Gyrfw0
equipped with: threading attachement
long turning attachement
barloader IEMCA PRA
the machine is designed as double 4-spindle machine
13
Thread cutting machine, recoil spindle, thread milling machine, cams, collets, several tool holders brand Göltenbodt
Blyyrt32sh
15
Diedesheim
Multidirectional transfer lathe 70-6
Year 1993
position 1: center: loaded by hand or feeder
from top: without
from below: drilling unit
position 2 center: drilling unit angle adjustment
from top: Drilling unit
27po2f
from below: Drilling unit
position 3 center: Drilling unit with position adjustment
from top: Drilling unit with position adjustment - facing unit
from below: Drilling unit
position 4 center: Thread unit with position adjustment
from top...
4
number of spindles:6
spindle passage:20 mm
Article: cam-controlled multi-spindle automatic lathe
Manufacturer: Schütte
Type: SF20
Yob: 1990
six main spindles
for bars up to D=20mm
Ccb73b8wv3
pick up for backworking,
clutch for thread cutting (overhauled but not in operation)
Nordmann tool monitoring (not in operation)
Chip conveyor brand Speck
Faudi additional filter system (magnet) with additional oil tank Booster pump with magnetic cartridge filter (approx. 16bar)
Interface for: bar loading ...
10
Multi-spindle automatic lathe Index MS24 E
Year of construction: 1993
Control: Index
6 spindle automatic lathe with bar loader
Cmbhso3u
Spindle power: 15kW
Spindle passage: 25mm
Manual stage loader
equipment
Chip conveyor
4
1 used multi-spindle automatic lathe, make Schütte, type SF 63 series 5-7
year 1975
Brgcve2lh3
(with many accessories, machine is under power)
4
6-spindle-automatic lathe
brand: SCHÜTTE
Swagu8
type: SF40
new in: 1973
equipped with: threading attachement
chip conveyor
barfeed
6
TORNOS AS14-6
Bar feeder CADDIE with noise-proof covers
Pick up + back drilling
Frontal drilling devices
No. 6 cross slides
Cams, tool-holders, gears
Chips conveyor
8j9iufg
Short pieces detector
Standard accessories
3
Schuette
Multi-spindle automatic lathe
Designation: Schuette SF 20-6
cam-controlled
Number of spindles: 6
Year of manufacture: 1984
max. bar diameter:
round 20 mm
SW 17 mm
AK 18 mm
VK 14 mm
B7zkel0ryy
max. bar feed: 80 /(160) mm
number of independent slides: 6
total / working travel (standard): 63/40 mm
" " (special) up to: 100/63mm
Number of independent cross slides: 6
Total / working travels
middle and top slide up to: 32/20 mm
bottom slide up to: 40/25 mm
spindle circle diameter: 224 mm
M...
5
number of spindles:6
spindle passage:51 mm
Article: cam-controlled multi-spindle automatic lathe with CNC-pickup
Manufacturer: Schütte
Type: SF51
Yob: 1988
six main spindles
for bars up to D=51mm
CNC-pickup in position 6 with rear CNC-machining;
electronic cam control Balluff;
independent feed position 4;
Giy3qrr
chip conveyor: magnetic belt;
oil/stee-running;
additional coolant pump with double filter (magnetic cartridge filter).
The machine tools shown and not listed are not part of the scop...
4
Schutte SF81 Multi-Spindle Lathe
Fully Equipped with Toolholders & Attachments
B97xgn978b
5
6-spindle-automatic lathe
brand: SCHÜTTE
type: SF51
new in: 1981
equipped with: pick up attachement
Cafler79es
thread chasing attachement
barfeed
4
Gildemeister multi-spindle automatic lathe
6- Spindler
Type AS 48-6
pick-up device
backward machining
chip conveyor
IEMCA PRA loading magazine
Oil mist separator
B7zknj70rw
5
number of spindles:6
spindle passage:20 mm
Cam controlled multi spindle automatic lathe, used
6 main spindles,
control: Siemens S5 PLC, electronical trip dog control type ?Balluff?
gear box for thread milling (2 pieces)
pick up for rear machining in pos. 6, work piece sorting shute,
coolant pump,
threading clutches, stock stand and reel,
tooling: could be different like pictures
partly revised inclusive new spindle bearings of the main spindles
interface for IEMCA bar loader
option: barl...
5
Gildemeister 6 spindle automatic lathe AS 32-6
- Spindle stop device
- Pick-up device pneum.
Accessories against surcharge
- cross hole drilling device
- thread cutting device
- thread cutting device
- optional milling device cross cutting device
Hhc8mqhbk
- spindle conveyor
machine was overhauled approx. end of 80's
5
number of spindles:6
spindle passage:32 mm
Article: cam-controlled multi-spindle automatic lathe
Manufacturer: Schütte
Type: SF32S DNT
Yob: 1992
Ccb72flfzz
six main spindles
for bars up to D=32mm
spindle drum with hirth coupled drum,
pick up in position 6 for backworking,
tapping couplings (currently used to stop the pick up)
Interface for: bar loading magazine IEMCA PRA
(optional I: IEMCA PRA bar feeder)
Coolant tank with chip conveyor
Brankamp tool monitoring (not in operation)
Please, conta...
Schuette SG 18-6 with portal loader as chuck lathe
alternatively conversion as bar turning machine possible,
incl. spindle stop device position 3+4 with extended stroke
B7zkh8ivje
CNC cross slide on position 5
etc.
Machine is ready for use and can be viewed under power
Loading device currently not connected.
4
Gildemeister 6 spindle automatic lathe AS 32-6
- Spindle stop device
- Pick-up device pneum.
Accessories against surcharge
- cross hole drilling device
- thread cutting device
- thread cutting device
B7zkhbvenb
- optional milling device cross cutting device
- spindle conveyor
machine was overhauled approx. end of 80's
2
Schuette multi-spindle automatic lathe
Schuette SF 20-6
cam-controlled
Number of spindles: 6
with mechanical gear
max. bar diameter:
round 20 mm
SW 17 mm
AK 18 mm
VK 14 mm
max. bar feed: 80 /(160) mm
number of independent slides: 6
total / working travel (standard): 63/40 mm
" " (special) up to: 100/63 mm
Number of independent cross slides: 6
Total / working travels
middle and top slide up to: 32/20 mm
bottom slide up to: 40/25 mm
spindle circle diameter: 224 mm
Main times min/max.: 0,36/1...
