Used Adda Drive Technology for sale (48,157)

Condition: new, Year of construction: 2025, functionality: fully functional, cutting height (max.): 1,300 mm, cutting width (max.): 1,300 mm, overall weight: 9,000 kg, workpiece weight (max.): 8,000 kg, saw drive: 11,000 W, The OBS1300 bundle cutting saw has been developed to optimize production in terms of time and efficiency when formatting material to the desired length. The presented machine is available immediately—viewings are welcome. Technical specifications: • Maximum bundle dimensions (width/height): 1300 x 1300 mm • Minimum bundle dimensions (width/height): 800 x 800 mm (hydraulic clamp operating limit—smaller bundles can also be cut) • Additional equipment enables cutting bundles with a minimum length of 600 mm Dlodpjxn Rt Ujfx Addja • Maximum cut-off bundle length: 3000 mm • Maximum feed bundle length: 6000 mm • Maximum bundle weight: 8,000 kg • Cutting accuracy: +/- 2 mm • Dedicated guide lubrication unit • GB TITANIUM cutting guide (rigid and robust, milled from a single steel block. Backward compatible with STHIL guides*) • STHIL RM404 cutting chain • 11 kW WEG guide drive motor • Fast measurement system with absolute encoder (retains position memory after power loss) and 0.2 mm positioning accuracy • Innovative strapping unit with intelligent system determining strapping point based on preset cut lengths • System of three sets of hydraulic clamps • Hydraulic system built using PONAR components • Crosswise infeed conveyor for loading bundles onto the machine • Intelligent unloading system with crosswise chain conveyor • Two pairs of tilting rollers (hydraulic) allowing large offcuts to freely fall onto the conveyor • TA DRIVE geared motors • HIWIN linear guides with increased load capacity • YHY Japan bearings • YASKAWA inverters and servomotor • 21-inch touchscreen operator panel • SIEMENS PLC controller (with remote access system) • Safety system and SICK brand sensors Warranty: 12-month warranty. Service response time: 24 hours. Spare parts and consumables warehouse. Machine supplied with: • Operating manual • Declarations of conformity • Warranty card • Electrical diagrams • Hydraulic diagrams

Condition: as good as new (ex-display), Year of construction: 2023, operating hours: 35 h, functionality: fully functional, total width: 87 mm, total length: 120 mm, maximum load weight: 200 kg, heating capacity: 7.2 kW (9.79 HP), tank capacity: 400 l, warranty duration: 24 months, type of input current: three-phase, inner dimension height: 600 mm, inner dimension length: 800 mm, inner dimension width: 500 mm, overall weight: 150 kg, input voltage: 400 V, input frequency: 50 Hz, workpiece weight (max.): 200 kg, LCT NW 180 BSS demonstration tank Dual frequency 27/80 kHz Dlsdpfx Adeq Rd R Dedea Ventilated stainless steel control cabinet Hinged lid Tank completely insulated Stainless steel washing cork with four crane eyes and a basket bar for lifting Four adjustable feet for uneven floors Floor emptying via ball with inclined tray base for complete emptying Floor grating Bottom and 2 x side sound with a total output of 3000 watts Timer with timer and program control Connected load 10.2 KW

Condition: new, Titan DrillCut – Flexible Cutting and Drilling Center for Maximum Efficiency The Titan DrillCut is a powerful CNC machining center that combines thermal cutting (plasma or oxy-fuel) with precise drilling and thread cutting in one machine. The robust gantry design ensures vibration-free processing even with heavy material thicknesses up to 200 mm. Dljdpfx Aefz A I Eoddja Equipped with the integrated VarioDrill system, it allows for efficient, non-hardening machining of holes from Ø 6 to 40 mm as well as thread cutting from M4 to M20. An automatic tool changer enables rapid switching between drilling, countersinking, and threading – ideal for automated production processes. This machine is the perfect solution for steel construction, mechanical engineering, and industrial metalworking, where utmost precision, flexibility, and production speed are essential.

Year of construction: 1999, condition: used, power capacity 1,5 kW Dledpfx Aou Sbd Teddea feed pressure 11 bar liter capacity 160 l weight of the machine ca. 0,15 t dimensions of the machine ca. 1,5x0,5x0,8 m 380 V, 50 Hz with plug and cable colour: light grey 2 cylinder, boiler 90 l compressor has been checked in our workshop, electr. testing report included!

Condition: like new (used), Year of construction: 2015, functionality: fully functional, Alba Drive EBUDAH 001 Function of the machine: during the production generated glass waste can you cutting safe and free from accidents, the waste can be collect in the under located - with forklift movable - emptying container. Size of workplace Dlsdpfx Adsd Nfb Uodea Length: 3500 mm Height: 1800 mm Width: 3000 mm Electric demand: 2,7 KW Supply voltage: 3x400 V Phase number: 3 The main components of the machine: - breaking unit - loading-tilting table - passive accident protection fence - control cabinet with power disconnect swith - air preparation - keypad unit If you need more information, We're here to help! Please contact us on the contact form or call us!

Condition: excellent (used), Gerber Technology Industrial Taurus II Leather Cutter Automatic Cutting Machine Dsdpfxex Ag Eve Addjla Material Height Single Ply. Maximum Cutting speed 1.27 m/second. Cutting Acceleration 10.16 m/second. Table Height 0.82-0.85m. Canon Camera Height 2.8 To 5.5m. NOTE - A Loading Charge of £ 100 plus VAT (if applicable) will be added to the invoice. With Monitor, Keyboard, Mouse & Software.

Year of construction: 2024, condition: new, Drum for Doppstadt screener SM 518 and SM 620 on stock. CHECK AVAILABLE PERFORATIONS. We manufacture and provide drums for mobile and stationary screeners, for : - Doppstadt SM 414 - Doppstadt SM 518 - Doppstadt SM 618 - Doppstadt SM 620 - Doppstadt SM 718 - Doppstadt SM 720 - Doppstadt SM 725 also Terra Select, Eggersmann, Pronar, Komptech , Mc Closkey... Bespoke maded drums are our specjality.. In case of any question, please contact me by mobile or e-mail. Djdpfxofi Tqbs Addola

Year of construction: 2024, operating hours: 35 h, condition: like new (used), functionality: fully functional, For sale a used, fully functional ACT-400 Load Bank/Loadbank from AGG Power Technology, in operation since March 2025. Technical Specifications: Voltage: 3-phase four-wire, AC400V, 50/60Hz Maximum power: 510 kW Resistive load in 11 steps, freely combinable: 1 kW, 2 kW, 2 kW, 5 kW, 10 kW, 20 kW, 20 kW, 50 kW, 100 kW, 100 kW, 200 kW Power factor: 1 Deviation from setpoint: ±5% Communication: RS232 / RS485, Modbus-compatible Cooling: Forced air Operating environment: -20℃ to +55℃ Duty cycle: Continuous Serial number: 2407034 CE / ISO 8528-06 / GB/T 2820.5-2009 certified Notes: Installed outdoors, total operating hours approx. 15,815 kWh Available for pickup/shipping from December 2025 Dodpfjxvmxpsx Addela Palletizing possible, buyer arranges transport Price negotiable Location: Czech Republic

Condition: new, Diamond Cube – Fiber Laser Cutting Machine | Compact | Precise | Efficient Dlodefz Di Aspfx Addsa The Diamond Cube is a space-saving yet powerful fiber laser cutting system designed for professional metal processing. It is ideal for companies seeking to combine high cutting quality and economical production in a compact machine. Technical highlights: – Working area: 3000 × 1500 mm (standard format) – Laser power: available in various power ratings depending on configuration – Material processing: steel, stainless steel, aluminum, and more – Maximum material thickness: up to approx. 25 mm (depending on power) – Positioning speed: up to 120 m/min – Precise servo drive and robust gantry design – Front loading with pull-out table for fast part changeover – Modern CNC controller with integrated CAD/CAM software – Low maintenance thanks to fiber laser technology Advantages for your production: – High cutting quality and repeatability – Compact design – minimal footprint – Fast changeover times and easy operation – Excellent cost-effectiveness and low operating costs – Ideal for small to medium batch production and contract manufacturing The Diamond Cube is the ideal solution for companies in steel construction, mechanical engineering, and metal fabrication wishing to modernize their production and rely on a dependable, precise, and energy-efficient laser cutting system.

Year of construction: 2022, condition: new, LCT bio. X A 100 Biologically based small parts cleaner including 80 liters LCT Bio Liquid cleaning fluid Bag filter Magnet for separating metal chips Washable prefilter Cleaning temperature is a comfortable 41 ° C Environmentally friendly Long service life of the cleaner little space required additional options are possible: Filter housing with washable nylon filter Dedpfxoffhnle Addsla Insert sheet made of V2A to protect the plastic surface Trolley

Condition: good (used), overall weight: 180 kg, total height: 1,650 mm, input voltage: 400 V, type of input current: three-phase, input frequency: 50 Hz, BB Stromberg AC Drive SAFUI 400F415 ABB SAFUI-400F-415 DISCONTINUED BY MANUFACTURER AC DRIVE 380/415VAC 50/60HZ 315/400KVA height:165 length:530 width:450 weight: ca170 DISCONTINUED BY MANUFACTURER Dodsxlr Aropfx Addjla

Condition: new, Year of construction: 2024, operating hours: 1 h, functionality: fully functional, Eddy Current separators from the Magnetic Series are mainly used in the waste recycling industry. The use of eddy currents allows for the recovery of non-ferrous (non-magnetic) metals from loose waste such as aluminum, copper, brass etc. The WPS separators are characterized by high separation accuracy due to the original solutions by ZŁOMIARZE, which guarantees high profitability of waste recycling. Wps separators are used in the recovery of: non-ferrous metals from the recycling of electronic waste non-ferrous metals from car recycling metals from foundry waste aluminum in glass recycling processes Dodpfxeu Dg Uhj Addola non-ferrous metals from steel waste non-ferrous metals from municipal waste Description of Operation: The material delivered by the vibratory feeder is placed on the conveyor belt of the eddy current separator. The separator belt transports the material toward the high-speed magnetic rotor. The magnetic rotor creates high-frequency magnetic field by using maximized system of alternating magnetic fields. The alternating magnetic field induces eddy currents in metals. These currents counteract the external field and lead to the rejection of colored metals outside the material stream. A divider installed at the end of the separator is provided for the separation of materials. The central magnetic rotor has been designed to handle the smallest materials, providing the ability to recover particles up to 1 mm in diameter. We also have larger sizes of eddy current separators - catalog in documents.

Year of construction: 2024, condition: new, We manufacture and provide drums for mobile and stationary screeners, for : - Eggersmann T 40 - Terra Select T 4 - EggersmannT 50 - Terra Select T 5 - Eggersmann T 55 - Terra Select T 6 - Eggersmann T 60 - Terra Select T 7 - Eggersmann T 70 - Eggersmann T 80 Djdpfx Adsfkm Dfodela also Doppstadt, Pronar, Komptech , Mc Closkey... Bespoke maded drums are our specjality. In case of any question, please contact me by mobile or e-mail..

Condition: like new (used), Year of construction: 2021, functionality: fully functional, total height: 3,000 mm, total length: 8,880 mm, total width: 4,000 mm, volume flow: 38,000 m³/h, type of input current: three-phase, workpiece weight (max.): 80 kg, compressed air connection: 8 bar, suction capacity: 38,000 m³/h, load capacity: 80 kg, heating capacity: 340 kW (462.27 HP), Equipment: cabin, lighting, For sale is a brand new wet painting line. Internal dimensions of the cabin 8880x4000x3000mm. Overhead conveyor of products with a length of 41m. Pitch of swivel hinges 400mm. Load capacity 80kg/m. Production speed maximum 4m/min. Large door to the cabin 2000x2500mm (possibility of painting large parts). Ventilation exhaust unit 38,000m3/min. Paint preparation room including membrane pump 01D140. Application electrostatic gun. Gas heating 340kW. Dlodpfxewmm U Uo Addea

Condition: new, functionality: fully functional, Year of construction: 2025, degree of automation: semi-automatic, laser type: fiber laser, Equipment: CE marking, dust extraction, emergency stop, Diamond Tube Laser T9350 – Precision and Flexibility for Tube and Profile Processing The Diamond Tube Laser T9350 from Eckert Cutting is a state-of-the-art laser tube cutting system specifically designed for processing tubes and profiles. Its robust gantry construction and angled rack-and-pinion drive provide exceptional rigidity, stability, and speed. Dljdpfx Adjf Ak Swsdsa Thanks to an intelligent, pneumatically controlled clamping system and floating tube support, the machine securely holds tubes and profiles of varying shapes and lengths—ensuring consistently high cutting quality even with long parts. The system enables the processing of a wide range of tube and profile geometries, including round, square, rectangular, oval, elliptical, special profiles, channels (C), I- and H-beams, and many other shapes. Complex angled and bevel cuts of up to 45° are also possible (with optional 4-, 5-, or 6-axis heads). Additional highlights include: 360° processing with CNC-controlled self-centering, high cutting precision with finely defined cut edges, stable production even with long tubes, as well as options for series production and automation through optional loading systems. With its versatility and reliability, the Diamond Tube Laser T9350 is ideally suited for companies in metalworking, steel construction, mechanical engineering, and fabrication—anywhere precise tube and profile processing with high efficiency and repeatability is required.

Year of construction: 2021, condition: as good as new (ex-display), The brush washbasin LCT bio.x C100 is the proven classic in a new design and with optimized equipment technology. It impresses with its extraordinary stability and load-bearing capacity. The spacious work surface enables barrier-free and comfortable working. - stable construction - particularly low-maintenance - high load capacity - Energy-saving mode for downtimes such as nights or weekends - A flexible articulated hose allows easy rinsing of the parts - Optimum cleaning performance by heating the cleaner to 41 °C The workpieces are rinsed off through a nozzle. With With the help of the flexible articulated hose, the nozzle in the desired position can be fixed. The cleaning brush supports the cleaning strongly dirty parts. The large cleaning surface enables effective cleaning To work. High carrying capacity of the washer due to stable device construction. Device is made of plastic and is therefore very stable and corrosion-free. Easy to transport using a lift truck. Multi-stage filter system, consisting of coarse screen, fine screen and magnet. In addition, a washable filter bag holds Dlodpfx Aeh S Undoddsa (fineness: 100 μm) finest impurities back before they get into the bathroom. A functional control with soft-touch control panel guaranteed by choosing the energy saving mode Energy savings of approx. 50%. All electronic components of the device are in one compact technical unit. Our LCT bio.x C100 can be used with the following label-free cleaners be driven LCT BioLiquid LCT Bio Liquid Special LCT Bio Liquid Power: LCT coconut cleaner LCT Coconut Cleaner Alu LCT Coconut Cleaner low-foaming

Condition: excellent (used), Year of construction: 2015, functionality: fully functional, conveyor belt length: 2,000 mm, conveyor belt width: 4,000 mm, Length 200 cm Width 40 cm Dsdpfx Adeww Id Eodjla Conveyor belt with metal detector, also for non-ferrous metals and aluminum Sensitivity adjustment of metal detection

Year of construction: 2014, condition: used, This listing is for a Freestead Technology WFI Storage Vessel Control panel. The unit is in full working condition and is ready for immediate release. Djdpfoxv A Srox Addsla This Unit was installed new in 2015 by Freestead Process Technology. A control panel designed and built for WFI system

Year of construction: 2024, condition: new, We manufacture and provide drums for mobile and stationary screeners, for : Dlsdpfx Aefkm Dpeddea Pronar MPB 18.47 Pronar MPB 20.55 Pronar MPB 20.72 also Terra Select, Eggersmann, Doppstadt, Komptech , Mc Closkey... Bespoke maded drums are our specjality. In case of any question, please contact me by mobile or e-mail.

Condition: excellent (used), Year of construction: 2018, functionality: fully functional, Technical Data Summary (No Marketing Spiel): This is a used automatic in-line Solder Paste Printer, Model P4034 from Shenzhen ETA Technology Co., Ltd, manufactured in 2018. The machine is in excellent functional condition. Key Performance Parameters: ● Repeat positioning accuracy: ±0.01mm. ● Printing accuracy: ±0.025mm. ● Max PCB size: 400×340mm. Djdjxm S N Uopfx Addola ● Min PCB size: 50×50mm. ● Max Stencil Frame size: 737×737mm. ● Cycle time (excluding print/clean):

Year of construction: 2024, condition: new, WPS Eddy Current Separator, Magnetic Series. Eddy Current separators from the Magnetic Series are mainly used in the waste recycling industry. The use of eddy currents allows for the recovery of non-ferrous (non-magnetic) metals from loose waste such as aluminium, copper, brass etc. The WPS separators are characterized by high separation accuracy due to the original solutions by ZŁOMIARZE, which guarantees high profitability of waste recycling. WPS Separators are used in the recovery of: • non-ferrous metals from the recycling of electronic waste • non-ferrous metals from car recycling • metals from foundry waste • aluminium in glass recycling processes • non-ferrous metals from steel waste • non-ferrous metals from municipal waste To ensure the longevity of the equipment, the ZŁOMIARZE, as one of few companies, has introduced an improvement in the form of the central cooling of the bearings of the magnetic rotor, thanks to which the service life of the machine has been extended even several times. Technical Specification: • Magnetic field source – NdFeB magnets • Smooth adjustment of magnetic rotor speed – 0-3000 rpm • Belt speed adjustment • Belt position control system • Magnetic rotor cleaning cleats • Belt cleaning scraper • Material divider adjustable in two levels • Bearing cooling system (greatly extends bearing life) • Control panel with safety check For our non-ferrous metal separator we offer additional devices to make you separation process easier: • vibratory feeder • belt conveyors • magnetic drum/belt separators For more information please download our catalog. Djdpfx Ajiqxtboddola If you're interested in our products, please contact us!

Condition: excellent (used), Servodrive Make Harmonic Drive Serial number : 3197MG12137 Djdpfx Asfd Enljddsla Data ,see picture

Condition: good (used), Year of construction: 2001, functionality: fully functional, Cleaning Centrifuge Machine type: SA100-B55-1 Year of manufacture: 2001 Rotor speed: 2,980 rpm Dsdpew Ewyrofx Addjla Rotor diameter: 365 mm Maximum sludge compartment capacity: 2–8 kg Weight: 525 kg Motor power: 5.5 kW Operating voltage: 5.5 kW The machine was serviced regularly and was connected to a parts washing machine in a paint shop.

Year of construction: 2020, condition: new, The Sapphire is the optimum solution for heavy industry for material thicknesses up to 200 mm. It enjoys great popularity with various production companies - often in three-shift operations - and all areas of application where stability, efficiency and process reliability are particularly important. Thanks to the high-quality equipment, the system is a universal tool for the highest demands and a helpful instrument for process optimization. Used in more than 400 industrial plants worldwide, the Sapphire cutting system proves itself every day. Equipment Dledpfx Adjf Ak N Rsdja - Harris oxy-fuel burner - Kjellberg plasma torch with e-touch - Kjellberg Q 3000 plasma power source with automatic gas console - Crosshair laser pointer for easier positioning - CamConcept Finest Cut V 7 - Suction table 3000 x 6000 mm - Suction unit PFC 6 incl. suction pipes - Delivery, installation and commissioning Main features - High dynamics and precision in automated 2D & 3D cutting of sheets, tubes and profiles - Sheet metal processing up to a material thickness of 200mm - Extensive cutting database for ideal user-friendliness - Designed for highest demands under the most difficult conditions in three-shift operation General technical data Drive: Servo AC Available working widths: 2.000-7.000 mm Available working lengths: from 1.500 mm positioning speed: 25,000 mm/min cutting thickness: up to 200 mm Cutting quality: DIN-EN ISO 9013 Positioning accuracy

Year of construction: 2024, condition: new, ZIGZAG air separators Application description: ZIGZAG type air separator is a device designed to purify materials in the waste recycling process. The separator separates light fractions from heavy fractions by pneumatic method. It works well with a wide range of waste materials of 0-150mm size. Air separators of this type are used for pre-ground, jagged or very fine materials. Thanks to our unique design, the separator has the ability to adjust at many points that are important for the purity of the received fractions. ZIGZAG type separators are used in many areas: weight classification of metal granules purification of shredded scrap from the light fraction (films, plastics, paper) removal of volatile fraction during recycling of WEEE purification of plastics, rubber purification of municipal waste, glass Dljdpfx Adoua D Aledoa removal of dust Construction description: The ZIGZAG separator consists of individual components mounted on a common support structure. In the first part, the ZIGZAG module is installed. The module has an inspection hole and regulation of the material stream passage gap. In the second part there is a cyclone discharging the light fraction. Underneath the cyclone there is a variable speed sluice for ejection of separated materials. A fan with electronic speed control is located on top of the structure. The structure is designed in part for loading and unloading by conveyor belts. The separator has a control cabinet equipped with a safety system.