Used Adjustable Fence for sale (23,085)

Condition: used, Technical data: - Flight circle (ø): 125 mm Dsdpfxezrylus Aptocl - Bore: 35 mm - Length: 180 mm - Material: Steel

Condition: used, Technical data: - Flight circle (ø): 125 mm - Bore: 35 mm - Length: 180 mm Dcodpfxozrykwj Aptel - Material: Steel

Condition: used, Technical data: - Flight circle (ø): 125 mm Dsdpfozrykqsx Aptjcl - Bore: 30 mm - Length: 140 mm - Material: Steel

Condition: used, Technical data: - Blade: WP Z4 V4 - Flight circle (ø): 160 mm - Bore: 50/40 mm - Length: 21–35 mm - Material: Steel - Condition: As new Dcedpfxezryf Uj Aptsl

Condition: used, Like-new adjusting nut for VOLLMER sharpening machines. Dcjdpfszrxxyjx Aptol

Condition: good (used), Year of construction: 1989, power: 22 kW (29.91 HP), with electric saw blade adjustment chain width 230 mm motor 22 kW Djdjzv Uyujpfx Aptecl max. cutting height without pressure comb with fixed blade guide 130 mm max. cutting height without pressure comb with movable blade 95 mm with pressure comb, the cutting height is reduced by 15 mm

Condition: used, Workbench vise, parallel vise ORION with dovetail guide and height adjustment Type: 125 Jaw width: 125 mm Jaw height: 25 mm Clamping range: max. 210 mm Overall height: 590 mm - 360° rotatable - Dovetail guide - Anvil surface for light straightening work - Approx. 250 mm height adjustment without lifting system Weight: 41 kg Djdpfjzpbrkox Aptocl Good condition

Condition: used, 2-station notching machine and folding machine EUROMAC type Multi 220/6R Press brake, press brake, notching machine Serial no. M11941298 Year of manufacture 1998 Cutting capacity 6 mm steel at 45 kg/mm2 4 mm for stainless steel Station I (notching) Notching angle 60° to 140° (with special blade from 30° to 140°) Knife length 220 mm Dcodpfxjmck Rys Aptel Table size 950 x 640 - Manual angle adjustment via hand wheels - Notching angle with built-in blade set from 60° to 140 - Hydraulic clamping of the upper and lower knives - Automatic cutting gap adjustment - sheet hold-down device - Scaled measuring tapes embedded in the table - stop rails with angle adjustment - Operation via foot switch Station II (die bending device) Pressure force 18 ton Table size 950 x 340 Working height 1100 mm - stepless lifting speed - Infinitely adjustable stroke limiter - Stroke adjustment up to 30 mm working stroke - Reversible prism with 4x 90° prisms, length = 415 mm - 90° upper tool, length = 415 mm Motor power 4 kW Mains connection 400 Volt, 50 Hz Space requirement L x W x H 1150 x 1050 x 1460 mm Weight approx. 1000 kg good condition

Condition: excellent (used), FENCO Multitubular Aseptic Sterilizer – Stainless Steel FENCO multitubular aseptic sterilizer, designed for the continuous thermal treatment and sterilization of liquid, semi-liquid, and viscous food products in aseptic processing industrial lines. The equipment uses a tubular/multitubular heat exchange system that allows for the indirect and controlled execution of the different phases of product heating and cooling. This technology is especially suitable for processes where precise thermal treatment is required before storage or aseptic filling. Its configuration with multiple tubular sections in stainless steel provides a large exchange surface and allows for the integration of different thermal stages within a single continuous process installation. MAIN FEATURES -Manufacturer: FENCO -Type: Multitubular aseptic sterilizer -Technology: Tubular/multitubular heat exchange -Continuous thermal treatment -Indirect product heating -Heating and cooling sections -Multiple heat exchange modules -Stainless steel construction -Sanitary product connections -Integrated piping and valve system -Process pumps -Self-supporting industrial structure -Designed for aseptic processes -Integrable into complete aseptic processing and filling lines Dcsdpfx Ajzw E R Tsptsl PROCESS The FENCO aseptic sterilizer is designed to circulate the product continuously through different heat exchange sections. Depending on the process configuration, the product can pass through preheating, heating, sterilization, holding, and cooling stages, controlling the necessary conditions before being transferred to a storage tank or aseptic filling system. Indirect exchange allows the treatment to be carried out while keeping the product separate from the heat transfer fluid. It can be integrated with: Preparation tanks Sanitary pumps Homogenizers Deaerators CIP systems Aseptic tanks Aseptic fillers Complete UHT/aseptic lines APPLICATIONS Especially suitable for the fruit and vegetable, tomato, juice, puree, concentrate, sauce, and other pumpable food industries that require continuous sterilization before aseptic packaging. Depending on its configuration, it can be used with fruit juices, pulps, and purees, concentrates, tomato products, sauces, and other liquid or viscous products. The combination of FENCO technology, multitubular exchange, and sanitary stainless steel construction provides an industrial solution for continuous sterilization and aseptic production processes. Machine available for inspection. Additional technical information, dimensions, additional photographs, or videos can be provided upon request.

Condition: new, Year of construction: 2018, Carrying capacity: 1.200 kg Dcedpfx Apjzvn Acstel Attachment suited for: Lifting equipment

Condition: excellent (used), functionality: fully functional, Year of construction: 2022, operating hours: 351 h, Linde E50 Electric Forklift | 5,000 kg | Triplex 5,365 mm | 351 hours | Battery + Charger Description For sale is a very well-maintained Linde E50 electric forklift from the 388 series. The vehicle is in excellent optical and technical condition and has only approximately 351 operating hours. The forklift features a triplex lift mast, hydraulic fork adjustment, a side shifter, a powerful 80V Triathlon battery (840 Ah), and the matching original Linde charger. In addition, fork extensions with a length of 2,400 mm are included in the scope of delivery. The DGUV and FEM inspection stickers are valid until 2026. Technical data: Manufacturer: Linde Material Handling Model: E50 Series: 388 Year of manufacture: 2022 Drive: Electric Load capacity: 5,000 kg Operating hours: approx. 351.3 h Lift mast: Triplex Lift height: 5,365 mm Free lift: approx. 1,516 mm Dcjdpfjznu Amsx Aptol Load center: 600 mm Fork length: 1,600 mm Fork extensions: 2,400 mm Tires: Superelastic Battery: Manufacturer: Triathlon Type: 6 PzS 840 Voltage: 80 V Capacity: 840 Ah Energy content: 63.9 kWh Year of manufacture: 2021 Charger: Original Linde PB Charger 80 V / 90 A Mains connection: 400 V / 50–60 Hz Equipment Triplex lift mast Hydraulic fork adjustment Side shifter 1 pair of forks 1,600 mm 1 pair of fork extensions 2,400 mm Triathlon 80V battery Original Linde charger Digital driver display Inspection stickers valid until 2026 Accessories as shown in the pictures Condition Used. Very well-maintained overall condition with only approx. 351 operating hours. The forklift is clean, immediately ready for use, and only shows normal signs of wear on the forks. Availability!! The forklift will not be available until the end of August. An inspection is possible by appointment. Reservations are possible by agreement. Scope of delivery Linde E50 electric forklift 80V Triathlon battery Original Linde PB charger 1 pair of forks 1,600 mm 1 pair of fork extensions 2,400 mm Accessories as shown in the pictures Note: The trolley/table shown in the photos, on which the charger stands, is not included in the scope of delivery. Shipping: Inspection possible by appointment. Loading onto a truck can be arranged. Expedited shipping throughout Germany and Europe is possible. Subject to changes, errors and prior sale.

Condition: good (used), intermediate support, counter bearing, bearing block, pillow block, steady rest, tailstock -Intermediate holder: with depth adjustment Dcodpfezmgfwox Aptel -Dovetail: 179 by 168 mm, 21 mm high -Dimensions: see photos / technical drawing -Dimensions: 275/95/H80 mm -Weight: 3.9 kg

Condition: used, Year of construction: 1992, Table milling machine, Panhans Type 250, from a training workshop. Dcodpfxeztwr Io Aptsl - Dovetail and slot table - Aigner integral fence - Elu feed system - Power: 5.5 kW - Speeds: 3000/4500/6000/9000 rpm - Clockwise/counterclockwise operation - Spindle: 30 mm #8503 Net price

Year of construction: 1972, condition: good (used), working width: max. 1.700 mm number of length wires: max. 16 wire diameter length wires; 2,5 - 3,25 mm wire diameter edge wires: max. 3,25 mm Dcsdpfx Aog Ryvweptel wire diameter knot wires: max 3,2 5mm

Condition: used, Offer 22187 Technical specifications: - Height-adjustable roller conveyor with spring support and locking mechanism - With clamping lever - Roller conveyor length approx. 3000 mm Dcedpfx Apowclhxstel - Min. roller conveyor height approx. 600 mm - Max. roller conveyor height approx. 1100 mm - Outer roller width approx. 280 mm - Roller length 2 x 125 mm each - Roller diameter approx. up to max. 100 mm - Maximum possible number of rollers: 10 - 7 pairs of rollers are installed - Total width of the roller conveyor approx. 500 mm - Total length approx. 3200 mm - Weight approx. 250 kg

Year of construction: 2000, condition: used, Milling stop adjustment: via handwheel Milling stop measurement display: Siko counter Dcedpfjy A Hi Rex Aptel Milling jaws adjustment: handwheel Milling jaws measurement display: Siko counter

Condition: excellent (used), Type: ZF 2 Manufacturer: WAFIOS Year of manufacture: - Serial No.: 2.1062.013 Capacity: 45 weft wires/min = 3.712 m Linear wire diameter: Core: 1.6 mm / Outer diameter: 2.6 mm Weft wire diameter: Core: 2.6 mm / Outer diameter: 3.6 mm Tensile strength: 600 – 700 N/mm² Number of twists of the 3 line wires: Crimp pitch: 19.14 mm Linear wire spacing: 153 mm Weft wire spacing: 82.5 mm Max. braid height: 1,250 mm Condition of the machine(s): Used, dismantled Dsdpfx Aswr Akcoptjcl

Condition: excellent (used), Year of construction: 1978, Machinetype: chain link fence machine Double spiral Manufacturer : WAFIOS Type: VDF80 Constr. year: 1978 wire diameter: 1,6-3,8 mm mesh width: 20-80 mm Djdpsvdtaasfx Aptscl working width: 2000 mm capacity: 160 m²/h

Condition: excellent (used), Year of construction: 1980, WAFIOS DF5 Dedpfxjv Uw Ddj Aptscl Wire range- 1,5- 5,0 mm Mesh with - 20 - 100 mm Working with - max.2000mm Capacity - 170 m2 / hour Tooling for the mesh width - 60 mm

Condition: used, adjustable gear motor, variable speed gear motor, electric motor -Adjustment is missing -Transfer in current condition as seen -Manufacturer Motor Bauer type: DK94V10/216 -Manufacturer: Gearbox Bauer -Motor power: 0.75 kW Dcedecfyf Nepfx Aptol -Speed range: 30 to 210 rpm -Motor: adjustable -Construction: B3 -Drive shaft: Ø 20 mm -Dimensions: 400/258/H475 mm -Weight: 58 kg

Condition: used, adjustable gear motor, variable speed gear motor, electric motor Dcjdpschbv Aefx Aptjl -Manufacturer engine Prym type: AD71 N8 -Manufacturer gearbox Prym type: L3-U6/2-B3 -Motor power: 0.12 kW -Speed range: 27-135 rpm -Motor: adjustable -Construction: B3 -Drive shaft: Ø 14 mm -Dimensions: 440/145/H260 mm -Weight: 21 kg

Condition: used, Braking resistor, charging resistor, damping resistor, filter resistor, brake chopper Dsdpfx Apjhfufkotjcl -Brake resistance: adjustable -Power: 110 Ohm / 2.5 A -Dimensions: 435/90 / H150 mm -Weight: 3.2 kg

Condition: used, Gear motor, electric motor, three-phase motor, electric gear motor -Speed adjustable: 64 - 640 rpm -Voltage: 220/380 V Dsdpfxed Rhdye Aptecl -Power: 0.25 kW -Construction: B3/B5 -Shaft: Ø 14/27 mm -Dimensions: 475/220/H160 mm -Weight: 18 kg

Condition: used, adjustable gear motor, variable speed gear motor, electric motor -Manufacturer Motor Marelli Motori Type: TM96010 -Manufacturer transmission Motovarici type: TK/002/R -Motor power: 0.22 kW -Speed range: 43.1-200 RPM Dcsdpfjc U Riaox Aptel -Motor: adjustable -Drive shaft: Ø 19 mm -Dimensions: 415/135/H180 mm -Weight: 14 kg

Condition: used, adjustable gear motor, variable speed gear motor, electric motor Dcjdjct Er Hspfx Aptjl -Motor power: 0.37 kW -Speed range: 21-105 rpm -Motor: adjustable -Drive shaft: Ø 25 mm -Construction: hollow shaft -Number: 1 piece of motors available -Price: per piece -Dimensions: 565/200/H280 mm -Weight: 33 kg