Used Adjusting Instrument for sale (22,287)

Condition: used, Year of construction: 1983, longitudinal travel 1 mm cross travel 1 mm table length 1 mm Dodpfxou Sbc Ae Addocr weight of the machine ca. 0,5 t dimensions of the machine ca. 1,5x0,8x1,9 m

Condition: used, Year of construction: 1997, diameter - cutter special 30 mm draw-in arbor diameter 40 mm clamping height 310 mm circle diameter 80-300 mm weight 30 kg Dcodsv Uchbspfx Addjr

Condition: used, Instrument Systems Instrument Systems LED Testing Laboratory CAS140C, LEDGON 100, Integrating Sphere, Keithley 2611 – Complete System! For sale is a complete, professional LED measurement laboratory from Instrument Systems (Konica-Minolta Group). The system is suitable for precise optical and electrical characterization of LEDs, LED modules, and small luminaires. All devices are from a laboratory environment, manufactured in 2007–2008, featuring high-quality industrial measurement technology. Scope of delivery / Included components - CAS 140C-152 spectrometer (2008) - Integrating sphere ISP250-110 & ISP250-211 (2008) - LEDGON 100 goniophotometer (2007) - CSD315 3-axis controller + emergency stop control panel (2007) - Keithley 2611 SMU / SourceMeter - PC system including software: - SpecWin Pro - SpecWin Light - Goniometer module - Original license CDs - User manual "LED test sockets" - Cables & accessories as per photos Dodpsx Da Awjfx Addocr Technical features - Measurement of total luminous flux (lumens) - Spectral analysis (color temperature, CRI, chromaticity coordinates xy, spectrum) - Goniophotometric angular measurement - Analysis of radiation characteristics - Electrical control and IV measurements with Keithley 2611 - Fully automated test procedures with SpecWin Pro CAS140C: approx. 36×15×30 cm / 7–9 kg Integrating sphere: approx. 40×40×45 cm / 6–8 kg LEDGON 100: approx. 80×30×28 cm / 12–15 kg CSD315: approx. 42×12×35 cm / 5 kg Keithley SMU: approx. 36×9×28 cm / 5 kg Total dimensions/weight: approx. 40–45 kg Important note: "The table shown in the photos is not part of the sale." Condition: used Scope of delivery: (See pictures) (Specifications and technical data subject to change and errors!) For further questions, feel free to contact us by phone.

Condition: used, SLA5800 Biotech - MFC - Digitally controlled mass flow controller for gas, Mass Flow Controller elastomer-sealed mass flow controller, flow control, flow meter, flow controller, thermal mass flow BROOKS INSTRUMENT Type SLA585081BAB1A2S1 Ser. No. 01C00500222 Year of manufacture 2020 (new / unused in original packaging) SLA5800 Biotech series Djdpfx Adouqgbyedjcr Option package Biotech Premium Packet Code T Mains connection 13.5 - 27 VDC (plug M8, 5 pin, male) Power consumption max. 10 watts PROFINET interface (2x RJ-45) Visual display 2 LEDs (NET / MOD) Gas connection 6 mm Swagelok Valve design Normally closed User gas O2 (oxygen) Active - Multiple / O2 (oxygen), N2 (nitrogen), CO2 (carbon dioxide), AIR (air) Calibration gas N2 (nitrogen) Flow control ranges (full scale) 20000 sccm (20 liters / minute) Maximum inlet pressure 4500 psi (300 bar) Normal operation Pressure differential 60 psig (4 bar) Control range 2% to 100% of full scale (range of mechanism) Typical accuracy from 20 to 100 % ± 0.9 % of set point for 20 to 100 % of full scale Typical accuracy from 2 to 20 % ± 0.18 % of full scale for 2 to 20 % of full scale Repeatability ± 0.2 % of the measured value Resolution 0.1 % of full scale Typical response time of the controller

Year of construction: 2019, condition: used, Power: 1 kW (1 HP) Manufacturer : ACS Instrument Model: 7400S Year : 2019 Type : Leak test bench / automatic and autonomous leak detector Application: Integrity test for flexible containers (flexible packaging, pouches, envelopes, etc.) EM delta P: +- 5000 Pa Pressure test: -55 hPa to 950 hPa Motor power : 0,75 kW The cup is placed in a sealed enclosure. A vacuum is applied in the enclosure, causing the cup to inflate. The inflated cup is clamped between the two horizontal walls of the enclosure and exerts a force on the internal pressure sensor. The force exerted on this sensor is the image of the internal pressure of the cup. The leak test consists of measuring a variation in the force on the internal pressure sensor between the start and end of the stage. A touch screen for controlling and setting the instrument parameters. A USB key for exporting results. Dcsdpfsx Atlvjx Adder Documentation available

Condition: good (used), Here we offer a handling device from ZASCHESitec. This device was used in the production of instrument panels. It consists of the following components: KBK - FPM 10 - 7,0 x 5,0 carriage - LWK 762 x 762 Load lifting module - Z-L6 - 80/1280 - 1486 Load lifting device - GP10 Dcsdpocipw Ujfx Adder Load capacity: 10 KG Scope of delivery: (ZASCHESitec handling device, technical documentation) Condition: used / used Further questions we can answer on the phone for you. Written order possible by email or fax

Condition: used, Tool measuring instrument Make Mitutoyo Type quick set R Dcodeddtuyopfx Addor

Condition: used, * Item no.: 900877, * Designation: CnHV37-20. Dcsdpfelkckfox Adder

Condition: used, Measuring range 16 mm Dcodpfewg Hp Eox Addsr Angle 60 ° weight 500 gr

Condition: good (used), Year of construction: 2015, SPC measuring device / remeasurement station for measuring diameters and cylindrical form Measuring device, manual measuring station, testing device, test station Measuring computer QDS-Base, manufacturer KOMEG Manufacturer: Hafner Fertigungsmesstechnik Philipp Hafner GmbH & Co. KG 3 levels, each with 3 probes Measurement with pneumatic jet measuring mandrel in 3 levels, each level with one pair of nozzles Measuring computer QDS-Base, make KOMEG incl. measurement software, Profibus, interface, monitor, and keyboard Dcodpfjwxb Sfox Addsr Temperature compensation "Price / details on request". All technical data subject to typing errors or mistakes. We sell exclusively only to countries of the European Union.

Year of construction: 2014, condition: new, digital length measuring device make Heidenhain ID 355 533-04 measuring bar type LF 481 - signal 1Vpp - measuring length 200mm Dcedpfx Adjb T Uqisdor

Condition: defective spare-parts repository (used), Oxford Instruments X-Strata 960 X-ray Fluorescence Analyzer – For Parts / Defective Item Description: For sale is a used X-ray fluorescence analyzer, model Oxford Instruments X-Strata 960. This device was removed during a laboratory decommission and is being offered exclusively for parts or potential repair. No functionality test has been carried out – the unit is therefore considered defective for the purposes of this sale. Technical Data – Oxford Instruments X-Strata 960 (non-binding) Djdpfx Adehaapfjdscr Feature Description Model: X-Strata 960 Manufacturer: Oxford Instruments Analysis Method: X-ray fluorescence analysis (XRF) Applications: Coating thickness measurement, material analysis, precious metal testing Measurement Geometry: Top-down or bottom-up, depending on configuration Radiation Source: X-ray tube (e.g., rhodium anode), 50–100 W output Detector: Proportional counter or silicon drift detector (SDD), depending on version Measurement Range: Coating thickness approx. 0.005 – 50 µm (material-dependent) Spot Size: Approx. 15 μm – 1 mm (depending on collimator) Z-axis: Motorized travel, up to approx. 230 mm measurement height Sample Chamber (W × D × H): Approx. 580 × 510 × 230 mm Sample Table: Manual or motorized (200 × 200 mm or larger, depending on configuration) Focusing System: Optical / laser focus, semi-automatic Operating System: Integrated industrial PC with Windows-based evaluation software Power Supply: 220–240 V / 50–60 Hz / approx. 500–800 W Unit Weight: Approx. 150–200 kg (depending on version) Condition: Used / Defective / For parts Scope of Delivery: As shown in the images – without accessories or software Important Notes: - Sale expressly as a defective device with no guarantee of functionality. - The item is offered for parts or for repair enthusiasts. - No warranty as to function, completeness, or technical specifications. - Commercial sale excluding any liability for defects, in accordance with § 447 BGB (Shipping Purchase). Scope of Delivery: - Oxford Instruments X-Strata 960 - All components visible in the images - No further parts, accessories or documentation included unless explicitly listed. Shipping & Collection: - Collection is possible and preferred in Borken - Shipping available upon arrangement. (Technical data subject to change and errors excepted!) We are happy to answer further questions by phone.

Condition: excellent (used), functionality: fully functional, National Instruments 7-slot chassis, Rev.1.0, 198666F 01L, NI PXIe 1082 Model: 198666F01L Dcsdpfjxq Ektex Addor Type: NIPXIe1082 Condition: Used Technical data: 100-240V AC 50/60Hz 8-4A max

Condition: used, This listing is for a Malvern Instruments Multisizer APA2000 Particle Counter Dcedpexzg Rcsfx Addsr

Condition: excellent (used), TA-Instruments Type: TMA Q400 TMA Thermomechanical Analyzer Performance: Temperature range (max.) -150 to 1,000 ˚C Temperature accuracy ± 1 ˚C Dcedpfohukh Nsx Addsr Furnace cooling time (air cooling)

Condition: excellent (used), functionality: fully functional, National Instruments Multifunction Data Acquisition Module, NI PXIe 6358 Model: NIPXIe6358 Condition: Used Technical Specifications: X Series General: Maximum number of referenced analog input channels: 0 Analog input resolution: 16 bit Maximum sampling rate: 1.25 MS/s per channel Number of analog output channels: 4 Maximum update rate: 3.3 MS/s per channel Bus type: PXI Express Number of bidirectional digital channels: 48 Measured electrical signal: Voltage Analog input FIFO buffer size: 8182 samples Dsdpfjxq Ei Ajx Addocr Maximum number of differential analog input channels: 16 Current flow direction: - Simultaneous sampling: Yes Absolute accuracy for analog input: 2688 μV Number of counters/timers: 4

Condition: used, This listing is for a Grant Instruments PV-1 Vortex Mixer Ideally sized for personal use, the Grant-bio PV-1 vortex mixer is compact, with a low profile and small footprint, to sit in almost any location. The PV-1 is so small that it will fit in your hand – yet there is no compromise on performance. The reliable motor produces regulated and reproducible agitation throughout the speed range. It is also extremely quiet. With variable speed from 750 to 3000 rpm, the PV-1 can be used for gentle through to vigorous mixing and pellet resuspension in 0.5mL, 1.5mL, and 15mL tubes. Adjustable speed control: 750 to 3000 rpm ‘Continuous’ or ‘touch’ operation For tubes up to 20 mm diameter Pressure sensitive cup accommodates tubes up to 20mm diameter Reliable and extremely quiet motor produces regulated and reproducible agitation throughout the speed range Dcedpfjxzg Eysx Addor Extremely easy to operate – select either ‘continuous’ or ‘touch’ operation and turn the knob to adjust the speed from 750 rpm to 3000 rpm In ‘touch’ mode, agitation starts in response to pressure on the pressure sensitive cup. Exceptionally compact with a low profile and small footprint – fits into almost any location Rubber suction pads hold tight to the work surface and prevent the unit from ‘walking’ – they also absorb vibration and prevent its transmission to the workbench

Condition: excellent (used), Oxford Instruments Here we offer you an INCAx-act Analytical Drift Detector. Microanalysis of elements including boron and above Operating temperature Normal mode 10-25 degrees Operating temperature extended mode 10-30 degrees Storage temperature -25 to 40 degrees and 8 to 80% humidity non-condensing Djdpfshx Nchox Addocr Operating humidity

Condition: excellent (used), MKS Instruments, Inc. Heated Capacitance Manometer, 627B 1MDD1B Model: 627B1MDD1B Condition: Used Dodpfexpu Tujx Addjcr

Condition: used, This listing is for a Grant Instruments LMC-3000 Centrifuge Dcodpfx Adexzg Emodsr The Grant LMC-3000 is a low speed benchtop centrifuge ideal for biomedical applications.

Condition: used, This listing is for 1 of 2 Grant Instruments QBD2 Heatblock. The unit is in full working condition and is ready for immediate release. The Grant QBD / QBH series are a versatile range of high quality digital dry block heating systems with excellent temperature control and a wide choice of interchangeable blocks for maximum flexibility. - The outstanding performance of the QBD / QBH series is based on advanced digital temperature control combined with high quality, precision-engineered blocks providing excellent thermal contact. - The result is accurate, reproducible and safe heating of your samples. - There is a full range of models and options to cater for basic through to more sophisticated applications - choose from three digital systems with 1, 2 or 4 interchangeable blocks (QBD models) and one digital high-temperature system (QBH2) with 2 blocks. These are complemented by an extensive range of interchangeable heating blocks to accommodate your sample tubes - from our standard range of blocks or tailored to suit your application. - In addition, for 2-block systems QBD2 and QBH2 we offer accessory blocks for accommodating microplates and microtube strips. - Heating range ambient + 5°C to 130°C (all three QBD models) or ambient + 5°C to 200°C (QBH2). - Rapid heat-up time. - Stability and uniformity ± 0.1°C. Dodpfexx Av Njx Addocr - Integral timer function optional external probe for in-sample or in-block temperature control. - Robust, compact, contemporary design. - Block extraction tool included as standard, for easy and safe removal of blocks.

Condition: used, This listing is for a Magellan Instruments Tandem Pro Gas Analyser. The unit is in full working condition and is ready for immediate release. The Magellan Instruments Tandem Pro Gas Analyzer is a self-contained O2 & CO2 gas analyzer. The PRO system comes with an internal gas pump and programmable display. It includes calibration functions, error reporting and dual 4-20mA outputs. An RS232 output is included for integration into control systems. Benefits: Greater understanding of your cells and processes Physiological state measurement on-line Scale-up and scale-down predictions Batch variation studies: feature analysis Metabolic flux analysis and mass-balance calculations Accurate fed-batch control Batch variation studies: anomaly analysis Metabolic activity based feeding Dedicated, continuous, standard signals for all your reactors On-line information, allows real-time calculation of RQ, CER, OUR, growth rate, KLa, etc. 0-10V and 4-20mA, with RS232 on PRO & Multiplex Dcedpfsxx Aqyox Addor Integrates to any reactor size (250ml – 100m3) Specifications: Feature CO2 O2 Measurement Principle: Infrared Absorption Electrochemical Range: 0-5%, 0-10%, 0-20% 0-30%, 0-50%, 0-100% Resolution: 0.01% 0.01% Accuracy: ±2% of full scale ±2% of full scale Drift:

Condition: used, This listing is for a Hanna Instruments HI 9060 Waterproof Thermistor Thermometer The unit is in full working condition and is ready for immediate release. The Hanna HI 9060 is a high-performance thermistor thermometer specifically engineered for use in challenging wet and humid environments. Its robust design and advanced features make it an essential tool for professionals in the food industry and other applications requiring precise temperature monitoring. Key Features: Waterproof and Rugged Design: Dcodexxz Htspfx Addsr Built to withstand harsh conditions, the HI 9060 is waterproof and can endure the rigors of busy environments, ensuring reliability in various settings. Dual-Level LCD Display: The intuitive dual-level LCD display shows the current temperature alongside the highest and lowest temperature extremes recorded during the session, allowing for quick assessments. Temperature Measurement: Measures temperatures in both degrees Celsius and Fahrenheit, providing flexibility for diverse applications. Interchangeable Probes: Compatible with a range of interchangeable probes (sold separately), enabling users to customize the thermometer for specific tasks or environments. Advanced Memory Functions: Equipped with memory capabilities that store high and low temperature readings, facilitating easy tracking and reporting of temperature variations. Long Battery Life: Enjoy an impressive battery life of up to 3000 hours, minimizing the need for frequent replacements and enhancing operational efficiency. Auto-Off Capability: The thermometer features an auto-off function that conserves battery life by shutting down after a period of inactivity. Low Battery Detection: Alerts users when battery levels are low, ensuring that the thermometer is always ready for use. Ideal Applications: Food Services: Essential for monitoring temperatures in kitchens, ensuring food safety and compliance with health regulations. Food Preparation: Perfect for checking temperatures during cooking and baking processes, helping to maintain quality and safety. Packaging: Ideal for verifying temperature conditions during food packaging, ensuring that products meet safety standards. Storage and Transport of Food: Crucial for monitoring storage temperatures in refrigerators and freezers, as well as during transit, to prevent spoilage. Wet and Humid Environments: Designed to thrive in damp settings, making it suitable for various applications beyond food service, such as laboratories or agricultural environments.

Condition: used, This listing is for a 1 of 2 Vickers Instruments Vickers Instruments Binocular Microscope. Dcedpfoxxzmyex Adder The unit is in full working condition and is ready for immediate release.

Condition: used, This listing is for a European Instruments Oxford F1 200g Weight. The unit is in full working condition and is ready for immediate release. The European Instruments Oxford F1 200g Weight is a high-precision weight used for checking the accuracy of balances and scales. Here are some key features and facts about this weight: Weight Class: The Oxford F1 200g Weight belongs to the F1 weight class, which is a high-precision weight class. Material: The weight is made of stainless steel, which is a durable and corrosion-resistant material. Dcedpfoxxzcuox Addor Weight Denomination: The weight is available in a denomination of 200g, which is a common weight denomination for laboratory and industrial applications. Supplied in: The weight is supplied in an ABS plastic box, which provides protection and convenience for storage and transportation. Serial Number Identified: Each weight is serial number identified, which ensures traceability and accountability.