Used Afm Tug 40 for sale (22,237)

Condition: good (used), Year of construction: 2012, Condition: 2012 overhauled to the latest UVV Installation height: 800 mm Ram stroke: 500 mm Gedpfx Aszvnfdjkaokb Projection: 360 mm Nominal force: 400 kN Hydraulic pressure: 160 bar Operating hours: 1356 Other: new control from Pilz, electrical circuit diagrams available Video about functionality available

Condition: used, Year of construction: 2013, HEDELIUS C50 C50/40/530/1800/8 Machining Center ==> Spindle running time: 8,997 h Manufacturer: HEDELIUS Gjdpfezc Rctsx Akaskb Model: C50 Year of manufacture: 2013 Control system: Heidenhain Machine weight: approx. 5,500 kg Technical data Travel in X: 1,800 mm Travel in Y: 510 mm Travel in Z: 480 mm Table size: approx. 2100 x 510 mm Feed rate: up to 8,000 mm/min Spindle speed: up to 30,000 rpm Spindle running time: 8,997 h Program running time: 10,446 h Equipment Heidenhain CNC control system Fully enclosed machining center Central lubrication system Coolant system Electronic handwheel Tool magazine Documentation available Description The machine is in very good condition and can be inspected while powered on after prior arrangement. With an X-axis of 1800 mm, the machine is ideally suited for machining long workpieces in tool, machine, and fixture construction. The comparatively low spindle running hours of only 8,997 hours are particularly noteworthy. The machine has a Heidenhain control system and reaches spindle speeds of up to 8,000 rpm. The HEDELIUS C50 stands for high precision, stability, and reliability "Made in Germany" and is ideally suited for both single-part and series production. Inspection: Possible by appointment in Bremen. _____ Subject to prior sale and errors in the technical specifications. The technical specifications have been compiled to the best of our knowledge, but do not constitute guaranteed characteristics. Our general terms and conditions apply; in addition, the seller is not liable for typing or data transmission errors. The appearance of the offered items corresponds to their age and the images shown. The technology and wear of the offered items are in accordance with their age. Used machines are sold exclusively to commercial enterprises and without warranty.

Condition: excellent (used), functionality: unexamined, operating hours: 8 h, power: 40 kW (54.38 HP), input voltage: 380 V, input frequency: 50 Hz, Tunnel microwave dryer with conveyor belt for continuous drying. Adjustable microwave power and belt speed, PLC control with separate control cabinet. Stainless steel construction and food-grade PTFE belt. Machine available in Switzerland (Martigny). Water-cooling circuit included. Ventilation system to extract water vapor from the chamber is not included. Technical specifications: General data • Model: HM-40KW-A • Quantity: 1 set • Frequency: 2450 ± 50 MHz • Microwave feed: top feed • Heating chambers: 4 Power / electricity • Microwave power: 40 kW (adjustable) • Rated input power: 50 kW • Power supply: 380 V, three-phase, 50 Hz Conveyor / belt • Belt width: 600 mm • Belt speed: 0.5 – 7 m/min • Conveyor motor: 0.75 kW, frequency inverter • Belt: Food-grade PTFE (high temperature, fire-resistant, anti-corrosion) • Conveyor height: 900 – 1500 mm • Leak-proof opening (microwave suppressor): H 50 mm; L 600 mm Cooling • Magnetron cooling: by water, circuit included Dimensions / construction • Machine dimensions (L × W × H): 5500 × 1000 × 2000 mm • Microwave active area: 4000 × 600 × 1750 mm • Construction: SS304, 1.5 mm thick • Observation windows Gkjdpfxszc Hvpj Akaeb Control / safety • Control: PLC control screen + separate cabinet • Temperature measurement: Non-contact IR (range indicated 0–350°C, up to 0–500°C) • Safety: Automatic shutdown upon door opening • Microwave leakage standard: GB 5959.6-2008 Conditions • Availability: Immediate • Location: Martigny, Switzerland (currently in the factory) • Condition: To be tested • Inspection: Upon request Transportation costs are the responsibility of the buyer.

Condition: excellent (used), Year of construction: 2008, functionality: fully functional, CNC machining center Matec 40 HV Control system: Heidenhain iTNC 530 Year of manufacture: 2008 Internal machine number: 70 Travel distances: X-axis: 3,000 mm Y-axis: 800 mm Z-axis: 1,100 mm (horizontal) Z-axis: 990 mm (vertical) NC swivel head, continuously adjustable: +/- 105 degrees Tool magazine: 40 positions Tool holder: SK50 Motor spindle: 8,000 rpm / 68 kW Accessories: - Chip conveyor - Prepared for partition wall - Electronic handwheel - Internal coolant supply 20 bar (paper band filter 450 l) - Complete enclosure for the working area with roof - Flushing gun - Oil central lubrication system - Oil mist extraction system Godpfxezxp A Nj Akaskb - 3D measuring probe with wireless transmission (Renishaw RMP60)

Condition: used, Year of construction: 1999, functionality: fully functional, Manufacturer: MORI SEIKI Model: MH 770 C Gsdsz Aktkopfx Akajkb Year: 1999

Condition: ready for operation (used), Year of construction: 2015, operating hours: 13,161 h, travel distance X-axis: 400 mm, travel distance Y-axis: 300 mm, travel distance Z-axis: 270 mm, number of axes: 3, This 3-axis Sodick AG40L LN2 was manufactured in 2015. It features an X-axis travel of 400 mm, Y-axis travel of 300 mm, and Z-axis travel of 270 mm. The machine has been operated for 13,161 hours and is currently connected and available for inspection/testing. If you are looking to get high-quality die-sinking capabilities, consider the Sodick AG40L LN2 machine we have for sale. Contact us for further details. • CNC Sinker EDM • Year: 2015 • Made in: Japan Gkjdpfx Asz Akwijkaob • Axes: 3 • Machine connected and available for inspection/testing.

Condition: ready for operation (used), Year of construction: 1995, functionality: fully functional, Year of manufacture: 1995 Type: DR 40 Z Machine number: 1205-3 Gkedozx H Icepfx Akaob Drilling capacity in steel: 40 mm Drilling capacity in cast iron: 50 mm Thread cutting in steel: up to M33 Thread cutting in cast iron: up to M45 Tool holder: MK 4 Spindle diameter: 55 mm Spindle travel: approx. 200–220 mm Spindle speeds: 18 steps, approx. 35–1,800 rpm Feeds: 0.075–0.60 mm/rev Vertical adjustment: 450 mm Table: 1,200 × 600 mm Weight: Approx. 2,400 kg

Condition: used, Year of construction: 1972, pressure 40 t throat 220 mm stroke 8-88 mm Godpfxeztfz Rs Akaokb stroke - stepless adjustable 30-140 mm ram adjustment 63 mm weight of the machine ca. 2600 t

Condition: used, Year of construction: 1986, functionality: fully functional, input voltage: 380 V, input frequency: 50 Hz, pressing force: 204 t, stroke length: 220 mm, table length: 4,000 mm, clearance between the columns: 3,400 mm, overall weight: 12,000 kg, We offer this used PROMECAM Amada STPC 204 200 40 160 press brake, manufactured in 1986. Machine number: STPC 200 40 160 Maximum pressing force: 2,040 kN Maximum stroke: 220 mm Voltage: 380 V Frequency: 50 Hz Date of manufacture: 20.10.86 Gedpfx Akjy Tmlajaekb Bending length: 4 m Distance between uprights: 3.4 m Includes tooling! Machine weight: approx. 12 tons Equipped with CYBELEC DNC 7000 control A crane is available for loading. The machine is functional and still in use / can be tested while powered on. However, due to its age, we cannot offer any warranty. If you have any questions or require further information, please feel free to send us a message or call us.

Condition: used, functionality: fully functional, Year of construction: 2012, in the following configuration: - GEKA punch holder No. 8-31 and 8-40 with quick-change system - GEKA die holder No. 8 and No. 5 - Support table at the punching station with stops - Support table at the flat bar station with stops - Selector switch for setup and operating modes - 1 foot pedal - Incl. accessories (punches and dies) - Technical documentation - CE design Technical data: Punching unit: Punching force: 40 t Throat depth: 175 mm Stroke: 50 mm Strokes per min. (at 20 mm stroke): 20 pcs. Max. sheet thickness Ø: 20 x 15 mm Gkjdjxu Ugxjpfx Akaeb Working height: 970 mm Flat bar shear: Cutting capacity: 300 x 6 / 200 x 13 mm Angle steel 45° (one flange): 50 x 50 x 6 mm Angle steel 90°: 80 x 80 x 8 mm Blade length: 356 mm Working height: 980 mm Round and angle steel shear: Angle steel 90°: 80 x 80 x 8 mm Round: 30 mm Square: 25 mm Working height: 1,110 mm General: Motor power: 3 kW Voltage: 400 V / 50 Hz Dimensions: Width: 800 mm Depth: 1,100 mm Height: 1,520 mm Weight approx.: 580 kg The specified performances refer to steel with R = 45 kg/mm²

Condition: used, Year of construction: 2010, functionality: fully functional, travel distance X-axis: 730 mm, travel distance Y-axis: 730 mm, travel distance Z-axis: 850 mm, rapid traverse X-axis: 50,000 m/min, rapid traverse Y-axis: 50,000 m/min, rapid traverse Z-axis: 50,000 m/min, nominal power (apparent): 22 kVA, controller manufacturer: MORI SEIKI, controller model: MSX-711 IV, table load: 500 kg, number of slots in tool magazine: 60, tool length: 500 mm, tool diameter: 140 mm, tool weight: 12 g, MORI SEIKI NH-5000 DCG/40 Horizontal Machining Center The MORI SEIKI NH-5000 DCG/40 is a high-performance horizontal machining center, designed to ensure exceptional precision, reliability, and continuous productivity, even for the most complex machining operations. Main features: Year of manufacture: 2010 CNC Control: Mori Seiki MSX-711 IV Machine weight: 12,700 kg Machine footprint (LxWxH): 4,628 x 4,952 x 3,012 mm Gkedpfxowxygzo Akaob Spindle: Spindle taper: ISO-40 Maximum speed: 14,000 rpm Spindle motor power: 18.5 / 22 kW (S1/S6) Working Capacity (axis travels): X axis: 730 mm Y axis: 730 mm Z axis: 850 mm Distance spindle center – pallet surface: 100 – 830 mm Distance spindle nose – pallet center: 100 – 950 mm Max. workpiece dimensions: Ø800 x 1,000 mm Rotary table: Dimensions: 500 x 500 mm Number of stations: 2 (with automatic pallet changer) Pallet load capacity: 500 kg Continuous table rotation: 360,000 positions Feed rates: Rapid traverse (X/Y/Z): 50,000 mm/min Working feed rates (X/Y/Z): 1 – 50,000 mm/min Tool changer: Tool taper: MAS BT-40 Shank: 90° Mori Seiki type Tool magazine capacity: 60 positions Max. tool diameter: Ø140 mm (without adjacent tools: Ø70 mm) Max. tool length: 500 mm Max. tool weight: 12 kg Equipment and accessories: Chip conveyor Coolant collection tank with wash pumps + external tank with paper filter High-pressure coolant pump through the spindle line Spindle head air conditioner and transformer Retractable tool presetting sensor Full technical documentation (manuals, electrical diagrams, CE declaration) Ideal for advanced machine shops and intensive production, the NH-5000 DCG/40 combines structural rigidity with advanced CNC technology, ensuring high-speed, high-precision machining of complex parts.

Condition: used, Year of construction: 2021, A vertical Hänel storage lift system is offered. Machine dimensions X/Y/Z: approx. 2810mm/1645mm/6152mm, access height: 890mm. Equipment: 10-fold optoelectronic height measurement of stored goods, integrated protruding goods check at the front and rear, LED lighting above the access point, equipment for emergency operation as well as earthquake-resistant design. Power supply cable: 5 × 2.5mm² / 5 × 4mm², depending on the electrical configuration. Documentation available. An on-site inspection is possible. Gsdpfjz Agf Ajx Akaskb

Condition: excellent (used), Year of construction: 2015, input voltage: 400 V, input current: 70 A, input frequency: 50 Hz, type of input current: three-phase, For sale: an industrial induction melting and holding unit, model IH-40-HNK, manufactured by INDUCTOR Kft. The unit was manufactured in 2015 and features a water-cooled, medium-frequency induction system. Technical Specifications Manufacturer: INDUCTOR Kft. Model: IH-40-HNK Year of manufacture: 2015 Power output: 40 kW Supply voltage: 3 × 400 V / 50 Hz Rated current draw: 70 A Water-cooled inductor Stainless steel, insulated melting vessel Estimated vessel capacity: approx. 200 liters Modern medium-frequency IGBT power electronics PLC/HMI control system Control cabinet weight: 190 kg Gkodpszy Ng Rsfx Akajb Applications Aluminum melting Aluminum holding Foundry operations Metal processing plants

Condition: used, Year of construction: 1992, functionality: fully functional, power: 330 kW (448.67 HP), control type: PLC-controlled, actuation type: hydraulic, For sale is a used Quattro Spaner bandsaw, Super 40 model, manufactured in 1992, consisting of: - Spaner - Centering unit - 4-bandsaw system Super 40 This system is particularly suitable for the efficient cutting of light to medium-strength round timber and enables precise and efficient processing in a compact design. Technical data: Max. round timber diameter: 58 cm → Debarking up to 42 cm Gkedpfx Akozvx Shoaob Min. round timber diameter: 13 cm → Debarking up to 8 cm Feed rate: up to approx. 59 m/min → Reduced to approx. 20 m/min for large cross-sections Daily output: approx. 250–300 cubic meters/day → Depending on round timber diameter and cutting Condition and previous use: The system was in operation at a sawmill with an annual production of approximately 50,000 cubic meters in a single-shift operation until summer 2025. It was regularly maintained until it was taken out of service and was fully functional. However, due to its age and for reliable long-term operation, a complete overhaul is necessary. An inspection of the system for sale is possible by arrangement. An identical Quattro system, which has already been completely overhauled, can be inspected on-site during ongoing production. This allows interested parties to gain a clear picture of the system's performance and potential applications after an overhaul (see photo). Price on request. We will gladly send further technical information as well as photos and videos upon request. Inspection is possible after prior appointment.

Year of construction: 1988, condition: used, functionality: fully functional, PAAL RS 40/250 paper roll saw, Manufactured by Paal’s Packpressen-Fabrik in Germany. The machine is designed for cutting paper rolls and is suitable for industrial paper processing applications. Technical specifications: Manufacturer: Paal’s Packpressen-Fabrik Model / Type: RS 40/250 Year of manufacture: 1988 Machine number: 24458 Motor power: 17 kW Rated current: 34 A Voltage: 380 V Frequency: 50 Hz Gkjdsxu A U Dspfx Akasb Weight: 2,350 kg Condition: Used Price: €7,000 The machine is available for inspection. Category: Paper, cardboard & foil processing machinery → Cutting machinery Keywords: PAAL RS 40/250, paper roll saw, paper roll cutting machine, roll cutting machine, paper processing machinery, Paal’s Packpressen-Fabrik, paper rolls.

Condition: ready for operation (used), Year of construction: 2014, operating hours: 7,032 h, This 5-axis Sodick SLC400G was manufactured in 2014. It features an X-axis travel of 400 mm, Y-axis travel of 300 mm, and Z-axis travel of 250 mm. The machine also includes U/V travel of 150 x 150 mm. If you are looking to get high-quality wire EDM capabilities, consider the Sodick SLC400G machine we have for sale. Contact us for further details. • 5-AXIS: 5 • X-Axis: 400 mm • Y-Axis: 300 mm • Z-Axis: 250 mm Gksdpfxjz Akraj Akajb • U/V: 150 × 150 mm • Machine type: CNC Wire EDM • Year: 2014 • Made in: Japan • Machine connected and available for inspection/testing.

Year of construction: 1995, condition: ready for operation (used), Immediately available at location: Boschert punching nibbling machine Gedjzwubbjpfx Akaekb Type KST 40 / 750 PowerLine digital Year of manufacture 1995 Press force 40 tons Stroke height 40 mm Punch diameter max 105 mm Sheet thickness max 10 mm Extension tables left and right Quick-change system Digital backgauge system x-axis 0 – 1500 mm left y-axis 0 – 750 mm Tools Weight 3 tons At the price of Euro 2,000.-- plus VAT ex location.

Condition: used, functionality: fully functional, machine/vehicle number: 6323, Year of construction: 2004, operating hours: 9,825 h, load capacity: 4,000 kg, lifting height: 6,000 mm, fuel type: diesel, mast type: duplex, construction height: 3,850 mm, fork length: 1,400 mm, empty load weight: 7,250 kg, total length: 4,100 mm, drive type: Diesel, construction width: 2,150 mm, Side loader Chassis number: 6323 Load centre: 700 Fork width: 150 mm Fork thickness: 60 mm Mast type: Duplex Gkedpfsx Ekyfsx Akaeb Transmission: REX ROTH A4VG71 Condition: Refurbished with warranty Technical condition: good Front tyre type: Pneumatic Front tyre size: 27x10-12 Front tyre condition: 40 - 60% Rear tyre type: Pneumatic Rear tyre size: 27x10-12 Rear tyre condition: 40 - 60%

Condition: good (used), Year of construction: 1998, machine/vehicle number: 3815-130-3235, Offer 25380 Technical Data: - Drilling capacity in steel ST 60: 40 mm - Maximum drilling capacity in steel ST 60: 50 mm - Tapping capacity in steel ST 60: up to M 42 - Spindle taper: MK 4 - Spindle stroke: 200 mm - Spindle speeds steplessly adjustable: 40 – 1100 rpm - Right and left-hand rotation - 3 automatic feeds: 0.1; 0.16; 0.25 mm/rev - Throat depth: 350 mm - Max. distance spindle – table / baseplate: 790 / 1210 mm - Table with 2 T-slots: 630 x 540 mm - Table height adjustable via rack with hand crank - Drive: 400 V / 1.6 / 2.9 kW - Required floor space approx.: W 600 x H 2050 x D 980 mm - Weight approx.: 650 kg - Includes: - Tapping device - Quick-action drill chuck 1–13 mm Gksdpfx Aoxr Ayhjkaob - Emergency stop button - Work light - Coolant device

Condition: good (used), Year of construction: 2019, functionality: fully functional, Niles N 40 MC - 6000 Turning/Milling Center, year of manufacture 2019, Siemens SI 840 D SL control, X/Z 850/6820 mm, Y axis -200 / +400 mm, B axis 0.001°, B axis swivel range -105° / +95°, tool changer with 192 positions, C axis main spindle 0.001°, spindle speed up to 1750 rpm, 2 gear stages, max. workpiece weight between chuck and tailstock 6,000 kg, drive power 87 kW, HSK 100 interface, steady rest 70 - 425 mm, tailstock. Gksdpoyzd Rcsfx Akaob

Condition: excellent (used), functionality: fully functional, working width: 4,000 mm, sheet thickness (max.): 5 mm, number of support arms: 3, Equipment: CE marking, For Sale; 1 used 4metre Gade guillotine c/w non magnetic rear sheet support Gksdpfxeztczho Akasb The G.A.D.E. CO 40/4 is an Italian-made hydraulic guillotine sheet metal shear from the manufacturer's "Business" series. It features a robust monolithic welded structure designed for precise, straight cuts in metal fabrication workshops.  Machine Specifications Cutting Length: 4050 mm / 4metre Maximum Cutting Thickness: 4 mm (often rated up to 4/5 mm depending on material tensile strength) Build: Heavy-duty electro-welded monolithic frame, precision-machined for structural rigidity Operation: Hydraulic shearing system with integrated backgauge and control support (such as TRIA CNC configurations on select variants) / front operated powered back gauge Non magnetic rear sheet support ideal for your light / thin gauge steel cutting

Condition: used, functionality: fully functional, machine/vehicle number: 6862, Year of construction: 2006, operating hours: 11,697 h, load capacity: 4,000 kg, lifting height: 6,300 mm, free lift: 2,070 mm, fuel type: diesel, mast type: triplex, construction height: 2,950 mm, power: 62 kW (84.30 HP), fork length: 1,600 mm, empty load weight: 7,350 kg, total length: 4,100 mm, drive type: Diesel, construction width: 2,350 mm, Sideloader Chassis number: 6862 Load centre: 800 Fork width: 150 mm Gkodpfxsx Ekzcs Akasb Fork thickness: 60 mm ISO class: ISO class 3 = 2,500 - 4,999 kg Mast type: Triplex Speed class: 20 Condition: Refurbished with warranty Technical condition: good Front tyres type: Pneumatic Front tyres size: 27x10-12 Front tyres condition: 40 - 60% Rear tyres type: Pneumatic Rear tyres size: 27x10-12 Rear tyres condition: 40 - 60% Fork positioner,

Condition: good (used), Year of construction: 2008, functionality: fully functional, Weiler DZ 40, Year of manufacture 2008, Siemens 840 D control system, Travel range X/Z 200/350 mm, Turning diameter 180 mm, Maximum swing diameter 560 mm, Y-axis +/- 25 mm, Q-axis / programmable steady rest, Q-axis travel range 360 mm, Q-axis rotary measuring system, Steady rest, MK 4, Main spindle, maximum bar diameter 42 mm, Spindle bore 52 mm, Rapid traverse rate X/Z/Q 30/30/20 m/min, 16-station turret - all stations driven, VDI 25, Shaft diameter 25 mm, Driven tools up to 4,500 rpm, Gsdpfx Aszlc Ekskaskb Tool tray, Accessories, Gobmey Ev Iusbf Sljbp, Driven tool holder, Fixed tool holder.

Condition: used, Year of construction: 2017, operating hours: 9,600 h, load capacity: 5,000 kg, lifting height: 4,000 mm, free lift: 110 mm, construction height: 3,240 mm, fork length: 1,500 mm, TECHNICAL DETAILS Load capacity: 5,000 kg Lifting height: 4,000 mm Free lift: 110 mm Fork length: 1,500 mm MACHINE DETAILS Operating hours: approx. 9,600 h Overall height: 3,240 mm Godszza E Tepfx Akaokb EQUIPMENT Hydraulic fork positioner with side thrust 4-way super elastic tires Full cab with heater Work lights

Year of construction: 1993, operating hours: 2,466 h, condition: used, Brand: Leistritz AG Gkedpjzu Nk Sefx Akaob Model: Micro 27/40 D Screw type: Twin screw Year of manufacture: 1993 Screw diameter: 27 mm L/D ratio: 40 Operating hours: 2,466