Used Afm Tug 40 for sale (21,432)

Condition: good (used), Pressing tool, sheet metal former, forming tool Hodpfx Aey Iv Adoiysnl -Pressing tool: Edge tool -Angle: 90° -Length: 155 mm -Hole: Ø 40 mm -Dimensions: 155/155/H285 mm -Weight: 17.8 kg

Condition: used, Year of construction: 2006, travel distance X-axis: 1,050 mm, travel distance Y-axis: 510 mm, travel distance Z-axis: 560 mm, controller manufacturer: Mazatrol, total height: 2,700 mm, total length: 3,445 mm, total width: 3,301 mm, overall weight: 8,900 kg, table length: 550 mm, table width: 1,300 mm, controller model: 640 M, spindle speed (max.): 6,000 rpm, spindle speed (min.): 25 rpm, Equipment: documentation/manual, CNC Vertical Machining Centre CNC Control: Mazatrol 640M Table size: 1300 x 550 mm Hnjdpfx Ajy Nz Etoiyol Table load: 1500 kg Movement X-Axis: 1050 mm Movement Y-Axis: 510 mm Movement Z-Axis: 560 mm Spindle taper: MAS BT 50 Spindle speed: 25 -6000 1/min. Magazine capacity: 30 positions Weight of the machine: 8900 kg If you have any questions concerning the machine, please do not hesitate to contact us by phone or e-mail. Feel free to view our other advertisements for a complete overview of our stock.

Condition: excellent (used), Tul-Kelch tool rack SK 40 Tool holder SK 40 48 slots for SK 40 tools Width 900 mm Depth 450 mm Height 1090 mm Hjdpfx Ajy I T S Njiyjnl

Condition: used, Single-column eccentric press WEINGARTEN type E 40 Machine. No. 643/62 Year of construction 1963 Pressure capacity 40 ton. throat depth 250 mm Table opening 150 x 80 and Ø 200 mm Table surface 560 x 460 mm ram surface 250 x 200 mm Plunger stroke adjustable 8-88 mm Plunger adjustment 63 mm Installation height 320 mm Clamping pin bore Ø 40 mm Stroke rate 100/130 strokes / min. Motor power 2.2 / 3 kW Hodpfx Astx E Rqjiyenl Mains connection 400 Volt, 50 Hz Table height above floor 840 mm - Clutch/brake combination with WEINGARTEN friction threaded clutch with TDC run-through protection - Electric lift release via two-hand control - Overload protection by breaker plate - Manual central grease lubrication - Front crankshaft support bearing - Control cabinet adjacent - UVV for manual insertion work Space requirement L x W x H 1800 x 1500 x 2200 mm Weight 3.1 tons

Condition: used, Year of construction: 2017, operating hours: 2,115 h, functionality: fully functional, feed length X-axis: 600 mm, feed length Y-axis: 400 mm, feed length Z-axis: 400 mm, spindle speed (max.): 4,000 rpm, spindle speed (min.): 50 rpm, rapid traverse X-axis: 8,500 m/min, rapid traverse Y-axis: 8,500 m/min, rapid traverse Z-axis: 7,000 m/min, overall weight: 2,708 kg, We offer this used TOS OLOMOUC FNG-40 CNC A milling machine, manufactured in 2017. Type: FNG-40 CNC A Hsdpfx Aijy Rbb Reyenl Serial number: 404 100 008 Year of manufacture: 2017 Weight: 2708 kg If you have any further questions or require additional information, please do not hesitate to send us a message or call us.

Condition: new, Year of construction: 2025, Table size: 3500 mm x 1500 mm Pump operating capacity: -0.85 bar Reservoir tank: 100 l Vacuum pump: Becker Vacuum pump capacity: 40 m³/h Noise level: less than 70 dB Hedpfomftlysx Aiyonl Machine length: 3600 mm Machine width: 1650 mm Machine width (folded): 850 mm Weight: 480 kg

Condition: new, Year of construction: 2025, Table size: 3000mm x 1500mm Pump operating vacuum: -0.85 bar Vacuum pump capacity: 40 m³/h Vacuum pump manufacturer: Becker Sound level: less than 70 dB Reservoir tank: 100 l Machine length: 3100 mm Hjdpfx Aeipv Nreiyenl Machine width: 1650 mm Machine width (folded): 850 mm Weight: 425 kg

Condition: new, Year of construction: 2025, Pre-milling unit: yes Pre-milling material removal: 0 - 2 mm Plastic edges: 0.4 - 3 mm Solid wood edges: 0.5 - 5 mm Hnsdpfx Aol D Rx Ueiyel Workpiece thickness: 8 - 50 mm Minimum workpiece length: 120 mm Minimum workpiece width: 110 mm Anti-adhesive spray unit: yes Edge preheating device: yes Glue application unit: Granulate / quick-change glue tank kit End trimming unit: yes Flush end trimming unit: yes Corner rounding unit: yes Flush radius trimming unit: yes Radius scraper unit: yes Flat scraper unit: yes Buffing unit: yes Cleaning spray unit: yes Power consumption: 5 kW Machine length: 3,774 mm Machine width: 1,546 mm Machine height: 1,337 mm Weight: 842 kg

Condition: used, Year of construction: 2007, offer consists of: - air-suction collator VAC-60Ha - air-suction collator VAC-60Hm - horizontal conveyor ST-40 - stitcher and folder SPF-200A - side corner stitch kit SSK-200 - fore-edge trimmer FC-200A - long conveyor LC-200 Horizon VAC-60Ha / VAC-60Hm air-suction collator - technology: touch & work - model: air-suction collator - bins: 6 - error avoidance: misfeed-,doublefeed- and jamming control - saveable jobs: 9 memories for repeat orders - extensibility: up to 6 collators (36 bins) programs: - doublecycle (nonstop-work) - inject (simply and doubly) - booklet making program - block program - selective collating Hsdsy H A T Hepfx Aiyjnl - sheet size: max. 500x350mm; min. 148x120mm - paper weight: 40-250g/sqm - loading height: 130mm/ bin - production speed: max. 9.500 cycles/h - power: 230V; 50/60Hz - 1,86kW - dimensions: 842x652x1.961mm - weight: each 310kg Horizon ST-40 incl. ST-CV stacker receiving tray + horizontal conveyor - benefit: enable non-stop operation in spite of misfeed- and doublefeedcontrol - dimensions: 1.300x700x950mm - weight: 126kg Horizon SPF-200A stitcher and folder: - format adjustment: fully automatic - DIN-size and standard fold types: preassigned - saveable jobs: 200 memories for repeat orders - stitching heads: 2 - expandable up to 4 stitching heads - stapling options: topstitching, (side-, cornerstitiching optional equipment) - ring eylete stitiching: with ring eyelet stitching heads possible - inlet format: max. 508x356mm; min. 180x105mm - processing strength: max. 25 pages (80g/sqm) - clip distance: min. 73mm - stitching wire: 26 - 28 - production speed: max. 4.800 booklets/h - power: 230V / 50Hz - 0,68kW - dimensions: 1.625x810x1.070mm - weight: 500kg Horizon FC-200A fore-edge trimmer: - faulty set ejection - booklet size: max. 250x20mm min. 85mm - trimming thickness: max. 100 pages (80 g/sqm) min. 4 pages - production speed: max. 4000 booklets/h - power: 230V / 50Hz - 0,55kW - dimensions: 655x810x1.070mm - weight: 245kg We can also organize the following for you: packaging, loading, transport ( by ship or plane) including customs

Condition: used, Year of construction: 2008, operating hours: 1,072 h, fuel type: electric, color: grey, Empty weight: 6.946 kg Dimensions (LxBxH): 650 x 153 x 195 cm - Year: 2008 - Documentation available: Yes - └ Type Documentation: User manual - CE marking present: Yes - CE certificate present: No - Serial number: Z40N08-510 - Operating hours: 1072 - Drive type: Electric - Working height [mm]: 12320 - Platform capacity [kg]: 227 - Movement: Solid rubber tires - Transport dimensions: 6500mm x 1530mm x 1950mm (l x w x h) - Transport weight [kg]: 6946kg - Transport packages [pcs.]: 1 Financial information VAT: The price shown is exclusive of VAT Hnodpoy Izc Nofx Aiyel VAT/margin: VAT deductible for entrepreneurs Delivery and trade-in always possible for everything in the industrial sectors Tess van den Boom

Condition: used, Year of construction: 2007, operating hours: 15,936 h, Type of fuel: Electric Empty weight: 6.777 kg Dimensions (LxBxH): 290 x 125 x 318 cm Lifting capacity: 4.000 kg Lift height: 491 cm Fork dimensions: 1.200 x 1.150 mm - Year: 2007 - Documentation available: Yes - CE marking present: Yes - CE certificate present: No - Serial number: 516327000881 - Operating hours: 15936 - Lifting capacity: 4000kg - Lifting height: 4910mm - Overhead clearance: 3180mm - Free lift: 0mm - Fork length: 1200mm - Maximum fork width: 1150mm - Minimum fork width: 440mm Hedpfx Aijymdx Noysnl - Number of wheels: 4 Wheels - Attachment: Side-shift, Fork positioner - Options: Full cabin, Joystick, Work lights, Heating, Radio - Mast: Duplex - Drive: Electric - Capacity: 930Ah - Battery voltage: 80V - Transport dimensions: 2900mm x 1250mm x 3180mm (l x w x h) - Transport weight [kg]: 6777kg - Transport packages [pcs.]: 1 Financial information VAT: The price shown is exclusive of VAT VAT/margin: VAT deductible for entrepreneurs Delivery and trade-in always possible for everything in the industrial sectors Tess van den Boom

Condition: used, Year of construction: 2003, operating hours: 17,048 h, Type of fuel: Diesel Colour: Grey Empty weight: 6.081 kg Dimensions (LxBxH): 280 x 140 x 290 cm Lifting capacity: 4.000 kg Lift height: 440 cm Fork length: 1.300 mm - Year: 2003 - Documentation available: Yes - CE certificate present: No - Serial number: 517049104002 - Operating hours: 17048 - Lifting capacity: 4000kg Hnodeyh T T Aepfx Aiyel - Lifting height: 4400mm - Overhead clearance: 2900mm - Fork length: 1300mm - Number of wheels: 4 Wheels - Attachment: Side-shift - Options: Full cabin, Heating, Work lights - Mast: Duplex - Drive: Diesel - Motor brand: Deutz - Transport dimensions: 2800mm x 1400mm x 2900mm (l x w x h) - Transport weight [kg]: 6081kg - Transport packages [pcs.]: 1 Financial information VAT: The price shown is exclusive of VAT VAT/margin: VAT deductible for entrepreneurs Delivery and trade-in always possible for everything in the industrial sectors Tess van den Boom

Condition: used, Year of construction: 2011, operating hours: 14,662 h, Type of fuel: Electric Colour: Grey Empty weight: 6.477 kg Dimensions (LxBxH): 295 x 125 x 297 cm Lifting capacity: 4.000 kg Lift height: 448 cm Fork dimensions: 1.150 x 2.230 mm - Year: 2011 - Documentation available: Yes Hodpeywtqkofx Aiyonl - └ Type Documentation: User manual - CE marking present: Yes - CE certificate present: No - Serial number: 516327B00120 - Operating hours: 14662 - Lifting capacity: 4000kg - Lifting height: 4480mm - Overhead clearance: 2970mm - Free lift: 0mm - Fork length: 1150mm - Maximum fork width: 2230mm - Minimum fork width: 560mm - Number of wheels: 4 Wheels - Attachment: Fork positioner, Side-shift - Options: Work lights, Full cabin - Mast: Duplex - Drive: Electric - Brand/Type: Still - Battery voltage: 80V - Transport dimensions: 2950mm x 1250mm x 2970mm (l x w x h) - Transport weight [kg]: 6477kg - Transport packages [pcs.]: 1 Financial information VAT: The price shown is exclusive of VAT VAT/margin: VAT deductible for entrepreneurs Delivery and trade-in always possible for everything in the industrial sectors Tess van den Boom

Condition: new, Year of construction: 2026, functionality: fully functional, warranty duration: 12 months, type of input current: AC, product width (max.): 400 mm, input voltage: 230 V, MINIPACK REPLAY 40 EVO The Minipack Replay 40 EVO is a mobile, manual shrink film packaging machine with hood, ideal for small to medium batch sizes. ▢ Mobile, manual shrink film packaging machine with hood Hnsdex Tqf Dopfx Aiyol ▢ Output up to 300 units per hour ▢ Usable sealing bar dimensions: 420 × 280 mm ▢ Max. product dimensions: 400 × 250 × 160 mm ▢ Max. film roll size: Ø 250 × 500 mm ▢ Working table height: 925 mm ▢ Machine dimensions (closed): 1,160 × 700 × 1,120 mm ▢ Machine dimensions (open): 1,160 × 700 × 1,220 mm ▢ Machine weight (net/gross): 90 / 111 kg

Condition: excellent (used), Year of construction: 2005, functionality: fully functional, Pressure: 225 t Bending length: 4050 mm Control: DA 69 TW Oil capacity: 400 l Total power requirement: 17 kW Machine weight approx.: 18,100 kg Dimensions: 5700 x 2610 x 3300 mm Hsdpfx Asyz S Ngoiyenl

Condition: excellent (used), Catalogue number 7835 TECHNICAL DATA - Shaft width: 410 mm - Noise-dampening comb - Number of knives: 4 pcs - Table length: 2500 mm - Cast iron tables - Both tables adjustable - Original angle-adjustable guide fence - Motor: 4 kW - Electric brake - Extraction port diameter: 125 mm - Dimensions (L/W/H): 2500x820x1210 mm Hnodpfxjyz Iybo Aiyol - Weight: 910 kg ADVANTAGES – Made in Poland – Top control panel – 4-knife cutter block – Used jointer – Very good condition Net price: 15,900 PLN Net price: 3,790 EUR (depending on an exchange rate of 4.2 EUR) (Prices may vary with significant exchange fluctuations)

Condition: excellent (used), Catalogue number: 7885 TECHNICAL DATA - Max main blade diameter: 400 mm - Max cutting height: 120 mm - Main blade adjustable up/down and at an angle - Large blade guard - Spindle diameter: 30 mm Hodpfx Aoyg Iifeiyenl - Cutting length on sliding table: 1400 mm - Cutting width at guide: 1300 mm - With side sliding table - Guide on side table adjustable at angle - Main saw motor power: 4 kW - 2 speeds: 3000/4500 rpm - Table dimensions: 1120x1020 mm - Table dimensions with extension: 1630x1730 mm - Extraction port diameter: 80 mm, 140 mm - Dimensions (L/W/H): 3300x2180x1450 mm – weight: 1040 kg ADVANTAGES – Polish production – DTR documentation – Used saw - Very good condition Net price: 9900 PLN Net price: 2360 EUR (at rate 4.2 EUR) (Prices may change with exchange rate fluctuations)

Condition: excellent (used), Catalogue number: 7853 TECHNICAL DATA - Max. diameter of main saw blade without scorer: 400mm - Max. diameter of main saw blade with scorer: 350mm - Main blade adjustment (height/tilt): electric - Arbor diameter: 30mm - Arbor lock - Sliding table included - Side carriage + angle stop included - Sliding table length: 3000mm - Cutting width at rip fence: 1350mm - Side carriage included - Scoring unit included - Max. scorer blade diameter: 120mm - Scoring motor power: 0.75kW - Main motor power: 6kW - Motor for height adjustment: 0.25kW - Motor for tilt adjustment: 0.25kW - Three spindle speeds: 3500/4500/6000 rpm Hjdsy At R Uspfx Aiysnl - Table dimensions: 1220x650mm - Table extension: 1920x1450mm - Large blade guard - Extraction port diameters: 80mm, 125mm - Machine dimensions (LxWxH): 3500x3460x1500mm - Weight: 1000kg ADVANTAGES – Manufactured in Poland – Equipped with scoring unit – DTR documentation + CE certificate – Used saw, in very good condition Net price: 23,900 PLN Net price: 5,690 EUR (according to 4.2 EUR exchange rate) (Prices may change with significant currency fluctuations)

Condition: used, Year of construction: 2020, max. workpiece length 6360 mm profile spindle 1 Stück main drive 13 kW Control CNC SCM CNC Machining Center ACCORD 40 FX for windows and doors ----- INCLUDES extensive window and door tooling among others (window cutting available upon request!): Wooden windows IV 68, 78, 92 Wooden "style" windows Wood-aluminum windows Front doors Lift-and-slide doors Box windows Machine still in operation, available for viewing! Technical Summary (detailed description available upon request!): ----- - ??Working area X-Y = 6360 x 1905 Z = 350 - Automatic table with 8 support rails MATIC - L1825 - 5-axis spindle MAXI - Prisma T, HSK 63 E, 13 kW Hnodpfx Asy Hl Iysiysl - RTCP Setting - Self-calibration system for Prisma work unit - Adjustable chip removal device on the electric spindle - Preparation for "Prisma T-S" angle gearbox - BRC - Working unit: Saw blade for face machining, 1 vertical milling cutter connection 3 vertical, independent drill heads, center distance 32 mm 3 vertical drill heads (not independent), center distance 21.5 mm, for mortise drilling 4 horizontal drill heads (2 per side, not independent), center distance 21.5 mm 2 horizontal milling heads (1 per (Page) - TRC 48 - Rear Tool Magazine 48 tool positions (excluding tool holders) Center-to-center distance between positions: 104 mm Max. tool diameter: 350 mm Max. tool length: 320 mm Max. weight per tool: 10 kg (15 kg with HSK 63 E spindle) Max. total weight on the magazine: 250 kg - MACH 5 - Quick-change system: Allows tool changes on the electric spindle in just a few seconds. - Pendulum operation - Automatic lubrication of the axes - eye-M operating console with integrated PC - Additional fixed control panel - TECPAD - Remote control of machine functions - Clamping jaw preparation H145 for worktable with 8 support rails - Front stop row H110 for worktable with 8 support rails - Rear stop row H110 for worktable with 8 support rails - Suction cup H110 145x145 mm - Swivel suction cup H110 145x55 mm - Swivel suction cup H110 180x65 mm - First side stop row H145 for worktable with 8 support rails Second side stop row H145 for worktable with 8 support rails Clamp H145 with round base Clamp H145 with square base N.6 Lifting devices with double stroke H145 Laser and reference stop H145 for sheet (left) - PRO-SPEED safety system - Maestro CNC - Machine operator interface and programming - Maestro ProView - Simulation software Tools are sold in the condition, scope, and with accessories as they are currently in stock. Note regarding window cutouts, tool drawings, and tool system listings: Engelfried GmbH does not guarantee that the tools actually available correspond to the systems listed and drawn. (Technical specifications according to the manufacturer - without guarantee!)

Condition: used, functionality: fully functional, Year of construction: 2020, operating hours: 1,403 h, load capacity: 4,000 kg, lifting height: 3,480 mm, fuel type: diesel, mast type: telescopic, construction height: 2,250 mm, fork carriage width: 1,400 mm, fork length: 1,200 mm, empty load weight: 6,591 kg, drive type: Diesel, Diesel Forklift Load Center: 500 ISO Class: ISO Class 3 = 2,500 - 4,999 kg Mast Type: Telescopic Hnodpfx Aijy Iicdsyel Transmission: Electromechanical Condition: Ready for operation and fully functional Technical Condition: Very good Front Tire Type: Superelastic Front Tire Size: 250-15 Rear Tire Type: Superelastic Rear Tire Size: 250-15 Description: In addition to this unit, we offer a wide range of forklifts and warehouse equipment. All of our machines are workshop-inspected and FEM 4.004 certified. Please contact us via email or by phone. You can also find us at hsr-gabelstapler. Of course, we are also interested in buying your used equipment, regardless of whether you purchase a vehicle from us. Lease-purchase and financing at attractive conditions are available upon request. We will be happy to provide you with comprehensive and professional advice regarding our vehicles. Sideshift, 3rd valve, 4th valve, rear work lights, front work lights, heater, particle filter, full cabin, safety light, interior mirror, exterior mirrors, joystick, wiper, single-pedal, LED, seat,

Condition: used, functionality: fully functional, Year of construction: 2009, operating hours: 9,261 h, load capacity: 4,000 kg, lifting height: 3,680 mm, fuel type: electric, mast type: telescopic, construction height: 2,650 mm, fork carriage width: 1,040 mm, fork length: 2,350 mm, drive type: Elektro, Electric 4-wheel forklift Load centre: 500 mm ISO class: ISO Class 3 = 2,500 - 4,999 kg Mast type: Telescopic Transmission: Electromechanical Condition: Ready for operation and fully functional Technical condition: Very good Front tyre type: Superelastic Front tyre size: 250-15 Rear tyre type: Superelastic Rear tyre size: 21x8-9 Battery voltage: 80V Battery capacity: 930Ah Battery manufacturer: Habat Battery type: PzS Battery year: 2009 Hnodjy Iib Tepfx Aiyel Description: In addition to this machine, we offer further forklifts and warehouse equipment. All our machines are workshop-inspected and FEM4.004 tested. Please contact us via email or phone. You can also find us at hsr-gabelstapler. We are also happy to purchase your used machine, even if you don't buy a vehicle from us. Lease-purchase and financing on favourable terms are available upon request. We are happy to advise you professionally and in detail about our vehicles. Side shift, 3rd valve, rear work light, front work light, half cabin, interior mirror, rotating beacon, windscreen wiper, single-pedal drive, LED, seat,

Condition: good (used), Internal Item No.: 26041 Drill Bit Grinding Machine REMA Model: S2/40 Power: 0.9 kW / 380V 2900 rpm Hnjdpsy Hr R Uofx Aiysl Including accessories Dimensions (LxWxH): 100 x 70 x 120 cm Weight: approx. 200 kg The machine is fully operational and can be inspected under power, by appointment, in over 500 m² of heated storage space.

Condition: used, Year of construction: 2003, Technical details: x-travel: 2300 mm y-travel: 1200 mm z-travel: 600 mm turning speeds: 30-10.000 1/min max. torque on the spindle: 254 / 159 Nm control: HEIDENHAIN TNC 430 tool taper: SK 40 Hedpfxjwltwmj Aiyjnl tool change unit: 60 Pos. spindle: 40 / 25 kW fixed working table:surface area: 1.100 x 1.100 mm rotary table: 1.100 x 1.100 mm rapid traverse: 30 m/min total power requirement: 69 kVA weight of the machine ca.: 20 t universal machining center with indexing head (2,5°), NC-rotary table, max. table load 1.500kg, internal coolant supply 30 bar, paper filter, el. handwheel, chipconveyor, automatic doors, flush gun, no touch probe available, approx. 81.400 h main swich on approx. 72.200 h control on approx. 26.700 h program running on machine under power , for functional testing *

Condition: ready for operation (used), Year of construction: 2012, operating hours: 22,398 h, travel distance X-axis: 400 mm, travel distance Y-axis: 400 mm, travel distance Z-axis: 375 mm, controller manufacturer: HEIDENHAIN, controller model: 530, spindle speed (max.): 18,000 rpm, number of slots in tool magazine: 30, number of axes: 5, This DMG DMU 40 evo Vertical Machining centre was made in 2012 in Germany and has 22398 production hours. It is equipped with a HEIDENHAIN 530 control unit and has 5 axis. The machine has a spindle speed of 18000 rpm. It doesn't have internal cooling but has 30 tools in magazine. Additional equipment • 30 tools in magazine Machine Benefits Technical Machine Benefits • Air blow Hnjdpfx Aisy Ic Tcjyel • Prepared for renishaw • Perfect condition • Full documentation available • No internal cooling

Condition: used, Year of construction: 2002, Single-head wire-stapling machine (“Klopfer”) Hnjdpfx Aieyv Eyzjyel for block, booklet and optional ring-eyelet stapling Quick changeover between block and saddle-stitch stapling Hohner’s signature wedge cut for optimal wire alignment. Technical specifications • Stapling capacity: up to 203 staples/minute • Number of stapling heads: 1 • Max. stapling thickness: 25 mm (folded), 40 mm (double-sided) • Ring-eyelet stapling: up to 3 mm (optional) • Round stapling wire: No. 21–30 (0.80–0.35 mm) • Flat staples: 0.70×0.35 to 0.96×0.78 mm • Stapling table size: 700 × 240 mm • Insertion depth: block stapling 95 mm, saddle stapling 290 mm • Working height: 880 mm • Motor power: 0.55 kW • Voltage: 230/400 V, 50 Hz • Overall height: 1540 mm • Footprint: 900 × 700 × 1540 mm • Weight: 200 kg (net), 240 kg (gross) • Noise emission: < 82 dB(A) Applications • Brochures • Pads • Calendars • Pads Available at short notice