Used Agie for sale (145)

Condition: good (used), Year of construction: 1997, Parts shown by hand not come. Knodpopy Errefx Adhea

Condition: ready for operation (used), Year of construction: 2002, travel distance X-axis: 500 mm, travel distance Y-axis: 350 mm, travel distance Z-axis: 426 mm, wire diameter (max.): 0.3 mm, overall weight: 3,900 kg, number of axes: 5, wire diameter (min.): 0.15 mm, This 5-axis AGIE Classic 3s wire EDM machine was manufactured in 2002. It features an X-axis travel of 500 mm, Y-axis travel of 350 mm, and Z-axis travel of 426 mm. The machine is equipped with a submerged head and includes a chiller, resin filters, and a wire feed/recovery system. If you are looking to get high-quality wire EDM capabilities, consider the AGIE Classic 3s machine we have for sale. Contact us for further details. • U/V axes travel: ±70 mm • Number of controlled axes: 5 (X, Y, Z, U, V) • Taper cut: up to ±30° • Generator: MC 3S (Lista 030.844) • Axis driver (DA): DA MC 3S (Lista 030.834) Knodpfjy Ulp Tjx Adhsa • Electrical cabinet: Cabinet Classic 3S (Lista 027.254) • Power supply voltage: 3×400 V / 50 Hz • Installed power: 9 kVA • Rated current: 14 A • Dielectric: Deionized water • Heads type: Submerged with wire guide nozzles • Wire drive motor: +GF+ / Maxon Motor (Swiss made) • Circuit diagram: 628.992 Additional equipment • MTA chiller (included in the sale) • Resin filters • Deionizers • Wire feed/recovery system

Condition: used, Year of construction: 2004, Working range 1.050 x 650 x 250 mm max. workpiece weight 400 (800) kg control Agievision AGIE max. conicity 30° / 100mm travel -x axis 500 mm travel -y axis 350 mm travel -z axis 426 mm travel U x V-axis mm rapid traverse X-axis 3 m/min rapid traverse Y-axis 3 m/min rapid traverse U-axis 0,6 m/min rapid traverse V-axis 0,6 m/min rapid traverse Z-axis 0,6 m/min wire dia. 0,2...0,33 mm total power requirement 12,1 kVA weight of the machine ca. 3,9 t dimensions of the machine ca. 2,8 x 2,4 x 2,3 m Wire Eroding Machine AGIE - Agiecut Progress 3 Kodpfx Aew Spa Nedhjna

Condition: repair required (used), Year of construction: 1987, EDM sinking machine, manufacturer AGIE, type: EMT 1.20, year of manufacture: 1987. Travel ranges: X 250 mm, Y 160 mm, Z 200 mm with R3 adjustable head. Further details can be found in the data sheet. Knedpfx Adsix Nqhehoa

Year of construction: 1988, condition: used, Manufacturer: ONA Electro-Erosion, S.A. (Spain) Model: ONA-COMPACT 30 Year: 1988 Manufacturing Number: 5026/5912 Registration Number: 5026/8812 Type: Electrical Discharge Machine (EDM) - Die sinking Voltage: 220 V Current: 5.6 A Pulse Power: 2 x 0.75 HP Apparent Power: 2.13 KVA Frequency: 50/60 Hz Estimated Table Travel: 300 x 200 mm Dielectric Tank Capacity: 100-150 L Knedpjwf E Auofx Adhea Approximate Weight: 1000-1200 kg

Condition: ready for operation (used), Year of construction: 2005, travel distance X-axis: 350 mm, travel distance Y-axis: 250 mm, travel distance Z-axis: 250 mm, controller manufacturer: AGIE, number of axes: 3, This 3-axis AGIE Hyperspark 2 Exact with Erowa was manufactured in 2005. It features an X-axis travel of 350 mm, Y-axis travel of 250 mm, and Z-axis travel of 250 mm. The machine is equipped with AGIE VISION 4 Software and includes an EROWA ROBOT MULTI with 60 ITS 148 places and 240 ITS 50 magazine places. If you are looking to get high-quality die-sinking EDM capabilities, consider the AGIE Hyperspark 2 Exact machine we have for sale. Contact us for further details. • EROWA ROBOT MULTI with 60 ITS 148 Places and 240 ITS 50 Magazine Places Ksdjy S A Dcepfx Adhjna

Condition: reconditioned (used), Year of construction: 2010, operating hours: 27,000 h, functionality: fully functional, workpiece weight (max.): 750 kg, travel distance X-axis: 350 mm, travel distance Y-axis: 220 mm, travel distance Z-axis: 220 mm, total height: 200 mm, total length: 205 mm, total width: 202 mm, wire diameter (max.): 0.3 mm, workpiece height (max.): 220 mm, workpiece width (max.): 550 mm, workpiece length (max.): 1,000 mm, type of input current: three-phase, empty load weight: 2,450 kg, Machine fully cleaned, inspected, and tested. Available for viewing at our premises in Semsales (Switzerland). Ksdpfx Adezf Akyshsna Wire guides, 0.25 mm. Large bobbin kit.

Condition: excellent (used), Year of construction: 2003, functionality: fully functional, travel distance X-axis: 500 mm, travel distance Y-axis: 350 mm, travel distance Z-axis: 500 mm, overall weight: 3,600 kg, EDM MACHINE AGIE CHARMILLES AGIETRON IMPACT 3 WITH C AXIS TRAVEL X AXIS: 500 mm TRAVEL Y AXIS: 350 mm TRAVEL Z AXIS: 500 mm TRAVEL C AXIS: 360° TABLE SIZE: 800 x 600 mm TANK DIMENSIONS: 1100 x 730 x 400 mm ELECTRODE CHANGER: 28 POSITIONS ACCESSORIES: EROWA SYSTEM Knjdpfx Aoy Rd Imjdhea

Condition: ready for operation (used), functionality: limited functionality, machine/vehicle number: 009, travel distance X-axis: 420 mm, travel distance Y-axis: 320 mm, travel distance Z-axis: 350 mm, Tool changer; Knsdpfx Ador Iid Eohea Tank - 900x600 mm Stroke - 420x320x350 mm

Condition: excellent (used), Year of construction: 1997, operating hours: 16,100 h, functionality: fully functional, travel distance X-axis: 500 mm, travel distance Y-axis: 350 mm, travel distance Z-axis: 500 mm, workpiece weight (max.): 800 kg, total height: 3,000 mm, total width: 1,700 mm, total length: 2,840 mm, table width: 600 mm, quill travel distance: 500 mm, type of input current: three-phase, table length: 800 mm, feed length X-axis: 500 mm, feed length Y-axis: 350 mm, overall weight: 3,500 kg, tank capacity: 550 l, Equipment: documentation/manual, Agie Compact 3 CNC EDM machine for sale. Ksdpjzhwy Ujfx Adhena 1997 machine Fitted with System 3R Macro chuck on C axis. 10 station tool changer 16100 machining hours Macro - mini chuck shown in picture not included in sale

Condition: like new (used), Year of construction: 2017, functionality: fully functional, Table size 700 x 480 mm X travel 350 mm Y travel 250 mm Z travel 250 mm U/V travel +/-45 mm Max. taper cut +/-10 degree Max. size of workpieces 820 x 680 x 250 mm Max. weight of workpieces 400 kgs Wire speed 3 - 330 mm/sec Dimensions LxWxH = 2500 x 2500 x 2200 mm Knjdji A I Hfspfx Adhea Weight ca. 2640 kgs Accessories - Coolant tank - Manuals Very little working hours. The machine is like new. There are two identical machines.

Condition: ready for operation (used), Year of construction: 2016, functionality: fully functional, machine/vehicle number: 0044, workpiece height (max.): 250 mm, workpiece width (max.): 750 mm, workpiece length (max.): 550 mm, feed length X-axis: 350 mm, feed length Y-axis: 250 mm, feed length Z-axis: 256 mm, The machine was manufactured in 2011, but it was not put into operation and modernized until 2016. As part of this process, an electrical update for the WorkPartner automation system was carried out! TECHNICAL DETAILS Workpiece weight max.: 200 kg Knodpfx Adjzf E Nxjhoa Travel range X-axis: 1,800 mm Travel range Y-axis: 2,000 mm Travel range Z-axis: 1,100 mm Workpiece height max.: 250 mm Workpiece width max.: 750 mm Workpiece length max.: 550 mm Feed length X-axis: 350 mm Feed length Y-axis: 250 mm Feed length Z-axis: 256 mm MACHINE DETAILS Type of input current: Three-phase Dimensions & Weight Dimensions (L x W x H): 3,000 x 3,760 x 2,455 mm Total weight: 3,700 kg EQUIPMENT Documentation/Manual Cooling unit Note: The operating hours of the machine can be found in the last image.

Year of construction: 2014, condition: ready for operation (used), - USED - CNC DIE SINKING EDM Knedpfx Adsyy Th Ishsa X-AXIS TRAVEL: 600 mm Y-AXIS TRAVEL: 400 mm Z-AXIS TRAVEL: 500 mm MAX ELECTRODE WEIGHT: 50 Kg MAX  PIECE WEIGHT: 2000 Kg MAX PIECE SIZE: 1200 x 800 x 350 mm TANK SIZE: 1280 x 850 x 390 mm CONTROL UNIT: VISION 5 WEIGHT: 5500 Kg OVERALL DIMENSIONS: 1800 x 2900 x 3200 mm ACCESSORIES: C-AXIS NOTE: POSSIBILITA' DI AGGIUNTA MAGAZZINO CAMBIO ELETTRODI.

Condition: used, Year of construction: 2002, Voltage: 400V / 50/60Hz / 3 phases Machining method: Immersion Maximum workpiece size: 1200x700x400 mm Maximum workpiece weight: 1500 kg Table dimensions: 900x600 mm Distance from floor to table: 900 mm Total dielectric fluid volume: 1200 L Axes X, Y, Z, U and V Travel ranges X, Y, Z: 550 x 350 x 400 mm Travel ranges U, V: 550 x 350 mm Collision protection: Axes X, Y, U, V, Z Tapered cutting, max. taper: +/- 30° / 400 mm Available wire diameters: Ø 0.25 mm (Option 0.1/0.2/0.3 mm) Wire guide type: Closed diamond guide, gap-free Available spool weight and type (DIN standard): 1.6 kg (K 100) to 8 kg (K 160) Available spool weight and type (JIS standard): 3 (P3) to 5 kg (P5) Dielectric fluid Paper filter: 2 cartridges Dielectric fluid temperature: +/- 1°C Total volume of ion exchange resin: 20 L Maximum injection pressure: 20 bar Generator: Dual source Isopulse Total power: 10 KVA Maximum cutting speed: 400 mm²/min Minimum surface roughness: 0.20 microns Ra Measuring system: Glass scales Measuring resolution: 0.5 microns Servo motors: AC type All technical specifications are subject to change without notice; errors and omissions excepted. The machine was fully functional until it was dismantled. Knedpjza U Nlefx Adhea Warranty is excluded.

Condition: ready for operation (used), Year of construction: 2000, travel distance X-axis: 500 mm, travel distance Y-axis: 300 mm, travel distance Z-axis: 256 mm, overall weight: 2,356 kg, number of axes: 4, This 4-axis AgieCharmilles Roboform 54 was manufactured in 2000. It features an X-axis travel of 500 mm, Y-axis travel of 350 mm, and Z-axis travel of 256 mm. The machine can accommodate workpieces up to 850 x 650 x 256 mm and has a maximum workpiece weight of 400 kg. If you are looking to get high-quality die-sinking capabilities, consider the AgieCharmilles Roboform 54 machine we have for sale. Contact us for further details. • Taper (conicity): ±30° / 100 mm • Max. workpiece dimensions: 850 x 650 x 256 mm • Max. workpiece weight: 400 kg • Best surface roughness: Ra ≤ 0.2 µm • Best precision: ±0.005 mm • Generator model: 3R-600.83 • Electrical supply: 3~ 400 V / 50–60 Hz Kedpfx Aoy Eq Uvodhsna • Installed power: 5 kVA • Current: 5 A

Condition: ready for operation (used), Year of construction: 2006, operating hours: 37,021 h, travel distance X-axis: 500 mm, travel distance Y-axis: 350 mm, travel distance Z-axis: 256 mm, total height: 2,220 mm, total width: 2,400 mm, wire diameter (max.): 0.33 mm, overall weight: 4,400 kg, controller manufacturer: AGIE, controller model: Software version 07.08.01., product length (max.): 2,800 mm, number of axes: 3, wire diameter (min.): 0.07 mm, This AGIE Agiecut VERTEX 3 Erosion machine was manufactured in the year 2006 in Switzerland and has 37021 erosion hours. It is equipped with an Agievision 5 Software version 07.08.01 control unit. • Control: Agievision 5 (software version 07.08.01) • Condition: Excellent; regular maintenance; major service recently completed; fully operational; can be tested under power • EDM operating hours: approx. 37,021 h • Travels (U/V): ±70 / 70 mm • Distance for clamping: 1,100 mm • Max workpiece dimensions: 1050 × 650 × 250 mm • Max workpiece weight: submerged 400 kg / non-submerged 800 kg • Max cutting height: up to 250 mm • Taper capability: ±30° / 100 mm • Positioning • Max manual speed: 2 m/min • Max programmable speed: 3 m/min • Resolution: 0.0001 mm • Geometric tolerances: per manufacturer specifications • Wire system • Wire diameter range: 0.07–0.33 mm (standard 0.20 mm) • Wire spool capacity: up to 25 kg • Wire tension: 0–25 N • Wire speed: 60–300 mm/s • Wire feed: semi-automatic • Wire disposal: chopper system • Equipment & features • Automatic wire threading system • Threading nozzles: 2 mm (optional 1 mm / 0.6 mm) • Combined wire guide system and cylindrical wire guide • Electronic handwheel (manual control) • Remote control with LCD display Knodpfxoy D N I Ej Adhoa • TFT control screen (1024 × 768) • Keyboard and mouse control Dimensions Machine Depth 2800 mm

Condition: like new (used), Year of construction: 2014, AGIECHARMILLES FORM 300 wire erosion machine, manufactured in 2014. Travel: X 600, Y 400, Z 450 Table size: 750 x 600 mm. Working tank dimensions: 1,220 x 870 x 470 mm. Linear guides. Maximum workpiece weight: 1,600 kg. ISPG 80 A generator. EROWA ITS head. C-axis. Knodpfxszd D Nhj Adhea 6-electrode changer. Dielectric fluid tank: 700 liters. Filtration system with 6 paper cartridges.

Year of construction: 1994, condition: used, functionality: fully functional, Perfectly functioning EDM machine AGIE-ELOX MONDO 1/35A Kedpfx Aeygq D Ejdhona

Condition: ready for operation (used), Year of construction: 2008, travel distance X-axis: 550 mm, travel distance Y-axis: 400 mm, travel distance Z-axis: 350 mm, total height: 2,200 mm, This 3-axis AgieCharmilles Spirit 3 was manufactured in 2008. It features an integrated C-axis and electrode magazine, multitasking operating system with object-oriented graphical interface (AEP Spirit), and a table size of 850×650 mm. Movement range includes X:550, Y:400, Z:350. Consider the opportunity to buy this AgieCharmilles Spirit 3 wire EDM machine. Contact us for more information about this machine. Machine Benefits Technical Machine Benefits • Table size: 850 mm x 650 mm • Wear parts, some drive motors, and bearings have been replaced over the years. • Integrated c-axis and integrated electrode magazine. Knodpox D N Hrofx Adhea Dimensions Machine Depth 1800 mm

Condition: excellent (used), Year of construction: 2014, functionality: fully functional, machine/vehicle number: 591.063.002.0050, travel distance X-axis: 550 mm, travel distance Y-axis: 350 mm, travel distance Z-axis: 400 mm, table width: 600 mm, overall weight: 2,850 kg, table length: 900 mm, Equipment: documentation/manual, The AgieCharmilles CUT 300 Sp is a high-performance and versatile wire EDM, ideal for precision manufacturing of molds, prototypes, and complex components, offering: * extensive spatial travels * large dielectric capacity * ability for taper cutting * robust CNC control system. Knedpfxowwrk Ne Adhsa

Condition: excellent (used), Year of construction: 2012, functionality: fully functional, machine/vehicle number: 591.063.050.0035, workpiece weight (max.): 1,500 kg, travel distance X-axis: 550 mm, travel distance Y-axis: 350 mm, travel distance Z-axis: 400 mm, table width: 600 mm, overall weight: 2,850 kg, table length: 900 mm, Equipment: documentation/manual, Professional Wire EDM Machine AgieCharmilles CUT 300 (2012) Premium wire electrical discharge machining center from GF AgieCharmilles, ideal for precision manufacturing, tool & die making, and aerospace applications. Knedpewwq S Sofx Adhja

Condition: excellent (used), Year of construction: 2017, functionality: fully functional, machine/vehicle number: 591.063.060.0016, workpiece weight (max.): 1,500 kg, travel distance X-axis: 550 mm, travel distance Y-axis: 350 mm, travel distance Z-axis: 400 mm, table width: 600 mm, overall weight: 2,800 kg, table length: 900 mm, Equipment: documentation/manual, The CUT P 550 model from 2017 is an advanced five-axis wire EDM machine, ideal for precise industrial applications: * wide angular range capabilities (up to 30–45°), * efficient and intelligent IPG generator, * accuracy within a few µm, * advanced automation systems and anti-collision protection, Kedpfxswwrtwj Adhjna * stable, durable design enabling fully automatic operation.

Condition: good (used), Year of construction: 2004, Machine is in very good condition. Ksdjvkuqtjpfx Adhena Parts shown by hand not come.

Condition: good (used), Year of construction: 2005, Machine is in good working condition. Knedpfxjw Rqu So Adhja

Condition: reconditioned (used), Year of construction: 2013, Equipment: fridge, AGIECHARMILLES CUT400 wire EDM machine, manufactured in 2013. Travel: X 800, Y 550, Z 510, U 800, V 550 mm. Maximum taper: 30°/510 mm. Maximum workpiece dimensions: 1,300 x 1,000 x 510 mm. Maximum workpiece weight: 3,000 kg. Threading height up to 510 mm. Available wire diameters: 0.10 - 0.33 mm. Best surface finish: 0.20 Ra. Wire spools up to 25 kg. CHILLER UNIT. Dielectric volume: 1,700 liters. Knedpfx Adezbimhjhea INCLUDED SOFTWARE: TAPER-EXPERT, CT-EXPERT, PROFIL EXPERT, POWER EXPERT, SURFACE EXPERT. Wide selection of technologies for the most common workpiece/wire materials.