Used Agie Challenge 3 for sale (140)

Year of construction: 2001, condition: used, Control: AGIEVISION. Disconnected since 05.11.2026, operational until then, fully functional. Inspection possible by appointment. Gsdpfxs Ai Tzno Adkskd

Condition: ready for operation (used), Year of construction: 2008, functionality: fully functional, machine/vehicle number: 925674, workpiece weight (max.): 750 kg, travel distance X-axis: 350 mm, travel distance Y-axis: 220 mm, travel distance Z-axis: 220 mm, No minimum price – guaranteed sale to the highest bidder! Submitting a bid obligates you to collect the item on time on November 26, 2026! TECHNICAL DETAILS Workpiece dimensions: max. 1,000 x 550 x 220 mm Workpiece weight: max. 750 kg Travel range X/Y/Z axis: 350/220/220 mm Travel range U axis: 350 mm Travel range V axis: 220 mm Table dimensions: 680 x 450 mm Distance from floor to table: 1,000 mm Front door dimensions: 820 mm Total dielectric fluid volume: 760 l MACHINE DETAILS Control system: Agie Charmilles Operating voltage: 400 V Frequency: 50/60 Hz Gkedpfxe Ai Shaj Adkod Rated current: 18 A Connected load: 10 kVA Dimensions and weight Machine dimensions: 2,000 x 1,700 x 2,000 mm Machine weight: 2,500 kg EQUIPMENT Workbench with matching accessories

Year of construction: 2006, condition: refurbished (used), AGIECUT Challenge 3 eCut Year of manufacture: 2006 Travel ranges: X = 500 mm, Y = 350 mm, Z = 256 mm Travel ranges U/V axis: +/- 70 mm Maximum taper: 30° at 100 mm height Maximum workpiece dimensions: 1050 x 650 x 250 mm Maximum workpiece weight: 400/800 kg Achievable surface quality: Ra: 0.2 µm Available wire diameters: 0.10 – 0.33 mm Wire EDM machine with automatic wire threading With automatically lowerable tank (accessible from 2 sides) Incl. AGIEJOGGER hand box for convenient setup Incl. AGIESETUP 3D AGIEVISION control AGIE generator with eCut technologies for faster and more efficient machining Dimensions (length x width x height): 2800 x 2400 x 2220 mm Net weight: 4500 kg After receiving your order, we will clean, overhaul, and thoroughly test the machine. Gjdpfx Aogfm Rredkokd Subsequently, we will commission the machine at your facility. You will receive a 6-month warranty on the machine. We would be pleased to offer you the following additional services: - Control and maintenance training - Cooling unit - Programming system - Consumables - Clamping devices - Transport

Condition: good (used), Year of construction: 2001, - Number of axes: 5 - X-axis travel: 350 mm - Y-axis travel: 250 mm - Z-axis travel: 256 mm - Voltage: 3 × 400 V - Frequency: 50 Hz Gjdpfxjzxq Iye Adkokd - Power: 9 kVA - Rated current: 15.2 A - Workpiece size is limited to 750 x 550 x 256 mm and 400 kg No documentation available. Upon request, transport and loading can be arranged throughout Europe for an additional fee. Prices exclude VAT. Inspection possible by appointment. Contact us, our team will be happy to assist you. Machine buying and selling BUYING / SELLING PRODUCTION & METALWORKING MACHINES, MACHINE TOOLS, ETC. Do you need a high-quality, yet affordable machine for your production? Or do you want to sell yours? For further information or contact options, please use the contact form.

Condition: excellent (used), Year of construction: 2003, functionality: fully functional, overall weight: 2,650 kg, input frequency: 50 Hz, Possible accessories can be discussed on site. Godpoy Irdksfx Adkskd

Year of construction: 2006, condition: ready for operation (used), Travel X/Y/Z: 450mm/350mm/400mm, travel U/V: approx. +/-70mm, rapid traverse: 900mm/min, max. workpiece dimensions X/Y/Z: 1050mm/650mm/250mm, max. workpiece weight without/with tank: 800kg/400kg, wire diameter range: 0.2mm-0.33mm, tank volume: approx. 750l. Machine dimensions X/Y/Z: approx. 2000mm/2300mm/2500mm, weight: approx. 4000kg, control: Agievision. Documentation available. An on site inspection is possible. Gjdpfx Adoxwyv Rskekd

Condition: used, Year of construction: 2008, Diesinking / EDM Travel distance X: 550 mm Travel distance Y :400 mm Travel distance Z: 350 mm table size X: 700 mm Gkodpfxsw Ektfo Adksd table size Y: 500 mm max. electrode weight: 80 kg max. workpiece weight: 1000 kg tool changer: 5 -time cooler C-Axis

Condition: used, Year of construction: 2004, Working range 1.050 x 650 x 250 mm max. workpiece weight 400 (800) kg control Agievision AGIE max. conicity 30° / 100mm travel -x axis 500 mm travel -y axis 350 mm travel -z axis 426 mm travel U x V-axis mm rapid traverse X-axis 3 m/min rapid traverse Y-axis 3 m/min rapid traverse U-axis 0,6 m/min rapid traverse V-axis 0,6 m/min rapid traverse Z-axis 0,6 m/min Gedpew Spa Nsfx Adkokd wire dia. 0,2...0,33 mm total power requirement 12,1 kVA weight of the machine ca. 3,9 t dimensions of the machine ca. 2,8 x 2,4 x 2,3 m Wire Eroding Machine AGIE - Agiecut Progress 3

Condition: ready for operation (used), Year of construction: 2002, travel distance X-axis: 350 mm, travel distance Y-axis: 250 mm, travel distance Z-axis: 256 mm, wire diameter (max.): 0.33 mm, overall weight: 3,600 kg, number of axes: 5, wire diameter (min.): 0.1 mm, This 5-axis AGIE Agiecut Challenge 2 wire EDM machine was manufactured in 2002. It has a weight of 3600 kg and operates at a power of 9 kVA. The machine includes additional equipment such as an ICS Cool Energy i-Chiller external cooling unit and a standalone operator console terminal with screen, keyboard, and mouse. If you are looking to get high-quality wire EDM capabilities, consider the AGIE Agiecut Challenge 2 machine we have for sale. Contact us for further details. Gkjdezpa Abepfx Adked - Voltage: 3 x 400 V- Frequency: 50 Hz- Power: 9 kVA- Rated Current: 15.2 A- Additional Equipment: ICS Cool Energy i-Chiller external cooling unit mounted on wooden pallet- Additional Equipment: Standalone operator console terminal with screen, keyboard, and mouse

Year of construction: 2002, condition: ready for operation (used), Travel X/Y/Z: 500mm/3590mm/250mm, wire diameter range: 0.15mm-0.3mm, max. workpiece dimensions X/Y/Z: 1050mm/650mm/250mm, max. workpiece weight: 400kg/800kg, max. taper: 30°/100mm, wire speed: 300mm/s, max. surface quality: Ra 0.1µm. Machine dimensions X/Y/Z: approx. 2800mm/2400mm/2250mm, weight: approx. 4500kg, control: Agie, operating hours: approx. 151182h. Documentation available. An on-site inspection is possible. The image is an example. Gkjdezhnruopfx Adked

Year of construction: 1997, condition: ready for operation (used), Travel X/Y/Z: 500mm/350mm/500mm, table dimensions X/Y: 800mm/600mm, max. table load: 800kg, work bowl dimensions X/Y/Z: 860mm/620mm/350mm, max. electrode weight: 200kg, tool positions: 28, machine dimensions X/Y/Z: approx. 3000mm/3750mm/3000mm, weight: approx. 3340kg. Documentation available. On-site inspection is possible. Gjdpfovc Ha Rjx Adkjkd

Condition: used, Year of construction: 2007, table length 500 mm table width 350 mm ampere 65 A Control AGIEVISION 5 CNC total power requirement 20 kW weight of the machine ca. 4000 kg dimensions of the machine ca. m A G I E (Switzerland) CNC - Controlled Wire Cutting EDM Machine Model AGIECUT PROGRESS V 3, Year 2007 Working range, X Y Z (=height) 500 x 350 x 426 mm Wire head, U-V axis (helical/taper cuts) + / - 30 °/ +/- 70 mm Resolution of axes 0.0001 mm Speed for positioning the axes up to 3 m/Min. Tolerances (If machine is new) 4 µ Workpiece dimensions, L x W x H max. 1.050 x 650 x 420 mm Max.weight of workpiece with/w.o. Dieelektricum 400/800 kg Clamping System Universal Beams with fixing holes Cutting wire Ø 0.2 – 0.33 mm Size of wire roll up to 25 kg Cutting speed of wire 60 – 300 mm/s. Gkodpet Hxbkefx Adkjd Total electrical load, approx. 20 kW - 400 V - 50 Hz Weight, approx. 4,000 kg Dimensions of machine approx. 2.4 x 2.2 x 2.4 m Accessories / Special Features • AGIEVISION 5 CNC Path Control for 5 Axis with OS 2 Machining Version and With various subprogrammes for a easier and faster designing of machining programmes, Technology devices, PP 123 Agie Geometric helps, DNC-Connection,Graficheck in 2 D a. 3 D, Rethreading of wire when wire is cutted-off, Optimizing the programmed pathes, PURECUT for reduction of Oxidation on workpiece surface,10 various program-languages, and many more features. • Mobile electronic hand held control unit for manual adjustments and set-ups for new workpieces, and separate standing control panel with CD-recorder and large monitor. • “DA” PROGRESS integrated Dieelectricum Aggregate with chiller and Filtering System, large tank incorporated in machine’s basement, Koax flushing, • AGIE Generator with 65 A Capacity and cutting performance up to 300/450 mm² • AGIE Automatic Wire Threading System with wire shredder and container mounted in backside of machine. Condition : Very good. The machine comes from a first class tool and die shop. It has been kept in very good order and was regularly maintained. Delivery : Ex stock, as inspected. Payment : Net, after conclusion of contract.

Year of construction: 2008, condition: refurbished (used), AGIECUT Challenge V3, Year of manufacture 2008 Godpfom Amf Dex Adkskd travels: X= 500 mm, Y= 350 mm, Z= 256 mm travels U/V-axis: +/- 70 mm Maximum taper: 30° at 100 mm height Maximum workpiece dimensions: 1050 x 650 x 250 mm Maximum workpiece weight: 400/800 kg Achievable surface quality: Ra: 0.2 µm Available wire diameters: 0.10 - 0.33 mm Water bath machine with automatic wire threading With automatically lowerable tank (accessible from 2 sides) Incl. AGIEJOGGER- hand box for comfortable set-up Incl. AGIESETUP 3D AGIEVISION 5 control system AGIE IPG-V generator Dimensions (length x width x height): 2800 x 2400 x 2220 mm Net weight: 4500 kg The machine is cleaned, overhauled and extensively tested by us after receipt of order. Incl. user training at Techma on your overhauled machine Optional: transport, commissioning, training, cooler

Condition: excellent (used), Year of construction: 2008, functionality: fully functional, travel distance X-axis: 550 mm, travel distance Y-axis: 400 mm, travel distance Z-axis: 350 mm, table length: 850 mm, Agie Charmilles Spirit 3 tömbös szikraforgácsoló (akár bérbe is) AKCIÓS ÁR: 9.900,- EUR + Áfa (Régi ár: 17.500,- Eur+Áfa) A gép hibátlan. Folyamatosan szervizelt a hivatalos magyarországi márkaszerviz által. 2009-ben, újonnan került beszerzésre a Galika GmbH-tól. A gépet első perctől kezdve ugyanaz a két dolgozó üzemeltette és tartotta karban. A gépen kopó alkatrészeket, egyes meghajtó motorokat, csapágyakat cseréltek az évek során. Gyártási év: 2008 Integrált C-tengellyel és integrált elektróda tárral Vezérlés: multitasking operációs rendszerrel és objektum orientáltgrafikus kezelő felülettel ( AEP Spirit ) Asztalméret: 850×650 mm Mozgástartomány: X:550 Gkodsz I Tivopfx Adksd Y: 400 Z: 350 Gépméret: 1800x1900x2200 mm

Condition: used, No minimum price – guaranteed sale to the highest bidder! The machines are still assembled but disconnected from the power supply. An 11-ton forklift is available on site for loading. For sale is a wire erosion machine manufactured by AGIE, model: Agietron Integral 3. Gjdpfx Aszy Uk Iodkekd

Condition: ready for operation (used), functionality: limited functionality, machine/vehicle number: 009, travel distance X-axis: 420 mm, travel distance Y-axis: 320 mm, travel distance Z-axis: 350 mm, Tool changer; Tank - 900x600 mm Gkjdpfx Adsr Iid Ejked Stroke - 420x320x350 mm

Condition: used, Year of construction: 1997, functionality: not functional, type of input current: three-phase, overall weight: 422 kg, input voltage: 400 V, input frequency: 50 Hz, input current: 14 A, Equipment: cooling unit, documentation/manual, We offer this used AGIE AGIECUT 125 wire EDM machine, manufactured in 1997. Type: AGIEPULS MMD Serial number: 491.010 Electrical diagram: 624262.2 Weight: 422 kg Gkjdpfxjz Affno Adksd Voltage: 3 x 400 V Frequency: 50 / 60 Hz Rated current: 14.75 A The machine is currently disconnected. All electronic components, circuit boards, and the numerical control unit are intact. We suggest using it for spare parts recovery. If you have any questions or require further information, please do not hesitate to send us a message or call us.

Condition: excellent (used), AGIE – CNC wire electrical discharge machining (EDM) machine – AGIEMATIC CF20 / AGIEPULS MMD / DA-15/TP For sale, a complete industrial CNC wire EDM machine from AGIE, manufactured in Switzerland. The machine is designed for the precise cutting of metal components using the wire EDM process. The offered set includes: - AGIE AGIEMATIC CF 20 – CNC control - AGIEPULS MMD – pulse generator for EDM - AGIE DA-15/TP – dielectric preparation and circulation unit - working fluid filtration system - cooling unit - pumps and auxiliary equipment - complete set of cabinets and accessories as shown in the pictures Device data from the nameplates: AGIEMATIC CF 20 - series: 465 - device: 004 - weight: 280 kg - power supply: 3 × 380 V Gjdpfoz Et Ruex Adkekd - 50/60 Hz - power: 1.2 kVA AGIEPULS MMD - series: 436 - device: 001 - weight: 415 kg - power supply: 3 × 380 V - 50/60 Hz - power: 10 kVA DA-15/TP - series: 228 - device: 004 - weight: approx. 420 kg - power supply: 3 × 380 V - 50 Hz - power: 4.8–6.9 kVA Manufacturer: AGIE, Switzerland. The machine is a complete set with the original AGIE control, generator, and dielectric system. Condition: used, condition as shown in the pictures. Inspection on-site is possible. Before purchasing, it is possible to verify the completeness of the equipment.

Condition: ready for operation (used), Year of construction: 2006, operating hours: 3,422 h, travel distance X-axis: 500 mm, travel distance Y-axis: 350 mm, travel distance Z-axis: 430 mm, wire diameter (max.): 0.33 mm, overall weight: 3,900 kg, table load: 800 kg, controller manufacturer: AGIE, controller model: Vision, number of axes: 5, wire diameter (min.): 0.1 mm, This 5-axis AGIE Progress 3 wire EDM machine was manufactured in 2006. It features travel paths of 500 x 350 x 430 mm and a maximum workpiece weight of 800 kg. The machine is equipped with the AGIE Vision control unit and includes various near-new clamping systems and a wire alignment device. If you are looking to get high-quality erosion capabilities, consider the AGIE Progress 3 wire EDM machine we have for sale. Contact us for further details. Godpfx Asz Ert Isdkokd Technical overhaul of the machine in 2025 - Drive Motor M30- Motor with Pinion (tested)- MSS Central Control Unit (24V AC/DC)- Pressure Hoses- Dual Level Floats (S130) • Max. Workpiece Weight: 400 / 800 kg • Max. Taper Angle: 30° / 100 mm • Space Requirement (L x W x H): 2.8 x 2.4 x 2.3 m • Power Frequency: 50 Hz • Nominal Power: 12.1 kVA • Rated Current: 17.5 A • Short-circuit Current: 10 kA • Cabinet / Generator Type: CABINET (IPG-CNC 02D) • Additional Equipment & Accessories: Various near-new clamping systems, wire alignment device

Condition: ready for operation (used), Year of construction: 2006, travel distance X-axis: 350 mm, travel distance Y-axis: 250 mm, travel distance Z-axis: 256 mm, overall weight: 4,500 kg, number of axes: 3, This 3-axis AGIE Challenge 2 eCut wire EDM machine was manufactured in 2006. It offers precision electrical discharge machining capabilities, ideal for detailed and intricate metal work. Consider the opportunity to buy this AGIE Challenge 2 eCut wire EDM machine. Contact us for more information about this machine. Additional equipment • Wire System: Wire diameter 0.1-0.33 mm, Wire speed 60-300 mm/s, Wire tension 0-25 N, Wire spool up to 25 kg, Threading system up to 250 mm height, nozzles 1 mm and 2 mm Machine Benefits Technical Machine Benefits Gksdpfx Adex D Sb Eskod • Max workpiece dimensions (wxdxh): 750 x 550 x 250 mm • Axis travels u/v: ±70 mm • Positioning speeds: manual (x/y) 30°/100 mm, programmable (x/y) exc “a” 0. 9 m/min, cha/exc “d” 3 m/min, u/v/z 0. 6 m/min • Compressed air: Ø 7 mm, 6-8 bar, 5 m³/h, filtered, dehumidified, unlubricated • Cooling water: ≤ tune level -7°c, 20 l/min, 1. 5-3 bar Extra Information Machine still under power

Condition: ready for operation (used), Year of construction: 2006, operating hours: 37,021 h, travel distance X-axis: 500 mm, travel distance Y-axis: 350 mm, travel distance Z-axis: 256 mm, total height: 2,220 mm, total width: 2,400 mm, wire diameter (max.): 0.33 mm, overall weight: 4,400 kg, controller manufacturer: AGIE, controller model: Software version 07.08.01., product length (max.): 2,800 mm, number of axes: 3, wire diameter (min.): 0.07 mm, This AGIE Agiecut VERTEX 3 Erosion machine was manufactured in the year 2006 in Switzerland and has 37021 erosion hours. It is equipped with an Agievision 5 Software version 07.08.01 control unit. • Control: Agievision 5 (software version 07.08.01) • Condition: Excellent; regular maintenance; major service recently completed; fully operational; can be tested under power • EDM operating hours: approx. 37,021 h • Travels (U/V): ±70 / 70 mm • Distance for clamping: 1,100 mm • Max workpiece dimensions: 1050 × 650 × 250 mm • Max workpiece weight: submerged 400 kg / non-submerged 800 kg • Max cutting height: up to 250 mm • Taper capability: ±30° / 100 mm • Positioning • Max manual speed: 2 m/min • Max programmable speed: 3 m/min • Resolution: 0.0001 mm • Geometric tolerances: per manufacturer specifications • Wire system • Wire diameter range: 0.07–0.33 mm (standard 0.20 mm) • Wire spool capacity: up to 25 kg • Wire tension: 0–25 N • Wire speed: 60–300 mm/s • Wire feed: semi-automatic • Wire disposal: chopper system • Equipment & features • Automatic wire threading system • Threading nozzles: 2 mm (optional 1 mm / 0.6 mm) • Combined wire guide system and cylindrical wire guide • Electronic handwheel (manual control) • Remote control with LCD display • TFT control screen (1024 × 768) • Keyboard and mouse control Dimensions Machine Depth 2800 mm Gkjdpey D N I Ejfx Adkjd

Condition: excellent (used), Year of construction: 2005, operating hours: 16,000 h, functionality: fully functional, travel distance X-axis: 350 mm, travel distance Y-axis: 250 mm, travel distance Z-axis: 350 mm, Control system: AGIEVISION Table dimensions: 600 x 450 mm Max. table load: 400 kg Max. travel ranges: 350 x 250 x 350 mm (X/Y/Z) 28-position tool magazine C-axis integrated: 60 RPM CO2 extinguishing system Year of manufacture: 2005 Approx. 16,000 erosion hours The machine is fully functional, ready for operation, and connected. Gkjdpfxezk Ibzj Adked

Condition: excellent (used), Year of construction: 2006, operating hours: 8,252 h, functionality: fully functional, The machine is available for viewing at our premises in Semsales. It has been used for prototyping, with very few operating hours. 10-position tool changer. Erowa ITS50 chuck. Gkodsy In Dmopfx Adked

Condition: used, Year of construction: 2005, functionality: fully functional, machine/vehicle number: 072-003, workpiece weight (max.): 300 kg, travel distance X-axis: 300 mm, travel distance Y-axis: 200 mm, travel distance Z-axis: 300 mm, total height: 1,940 mm, total length: 1,340 mm, total width: 900 mm, type of input current: three-phase, overall weight: 910 kg, table length: 400 mm, table height: 300 mm, input voltage: 400 V, tank capacity: 20 l, input frequency: 50 Hz, input current: 30 A, Equipment: documentation/manual, Comes with accessories: set of pliers ranging from 1mm to 4mm. Gedpfezr D Dnox Adkokd

Condition: like new (used), Year of construction: 2014, AGIECHARMILLES FORM 300 wire EDM machine, manufactured in 2014. Travel: X 600, Y 400, Z 450. Table: 750 x 600 mm. Work tank dimensions: 1,220 x 870 x 470 mm. Linear guides. Maximum workpiece weight: 1,600 kg. ISPG 80 A generator. EROWA ITS head. C-axis. 6-electrode changer. Gksdszd D Nhjpfx Adksd EROWA rotating spindle, 1,150 RPM, with a set of collets. Dielectric fluid tank: 700 liters. Filtration system with 6 paper cartridges.