Used Agie for sale (143)

Condition: refurbished (used), Year of construction: 2007, functionality: fully functional, travel distance X-axis: 350 mm, travel distance Y-axis: 250 mm, travel distance Z-axis: 256 mm, AGIECUT Progress V2 Year of manufacture: 2007 Travel distances: X = 350 mm, Y = 250 mm, Z = 256 mm U/V-axis travel range: +/- 70 mm Maximum taper: 30° at 100 mm height Maximum workpiece dimensions: 750 x 550 x 250 mm Maximum workpiece weight: 200 kg (submerged) / 450 kg (non-submerged) Achievable surface finish: Ra 0.20 µm Maximum cutting rate: 500 mm²/min Glass scales on X and Y axes for enhanced precision Available wire diameters: 0.20 – 0.33 mm Submerged-type machine with automatic wire threading and automatic re-threading after wire break Manual front door (accessible from one side) Includes AGIEJOGGER hand-held pendant for convenient setup AGIE IPG generator with Power Module AGIEVISION control system Dimensions (L x W x H): 1640 x 2040 x 2220 mm Net weight: 2580 kg Our machines are cleaned and completely overhauled after receipt of order. Afterward, a test cut is performed with the finest surface finish for approval. You will receive a 6-month warranty on the machine. We are happy to offer on-site commissioning and training. Guedpfx Aljx Uxglo Aed

Condition: refurbished (used), Year of construction: 2005, functionality: fully functional, travel distance X-axis: 300 mm, travel distance Y-axis: 250 mm, travel distance Z-axis: 250 mm, workpiece weight (max.): 200 kg, quill stroke: 250 mm, AGIE Spirit 2 Year of manufacture: 2005 Guedpfx Aloxt N Hke Ajd APG FORM Control Travel paths: X = 300 mm, Y = 250 mm, Z = 250 mm Max. workpiece size: X = 500 mm, Y = 400 mm, Z = 185 mm Max. workpiece weight: 200 kg Max. electrode weight: 25 kg Distance table – chuck: 190 – 440 mm AGIE APG Spirit Generator – Working current 80 amperes Best achievable surface finish Ra 0.2 µm Including pneumatic chuck Erowa ITS 50 or 3R (at your choice) Including 4-position electrode changer in the magazine Net machine weight: 1,280 kg Machine dimensions (L x W x H): 1850 x 2100 x 2360 mm The machine will be cleaned, serviced, and subsequently tested after receipt of order. We are happy to commission the machine for you as well.

Condition: refurbished (used), Year of construction: 2007, functionality: fully functional, travel distance X-axis: 350 mm, travel distance Y-axis: 250 mm, travel distance Z-axis: 256 mm, AGIECUT Challenge V2 Year of construction 2007 Travels (X/Y/Z): 350 x 250 x 256 mm Gjdswqcm Uspfx Al Ajud Travels (U/V): +/- 70 mm Maximum taper: 30° at 100 mm Maximum workpiece dimensions (length/width/height): 750 x 550 x 250 mm Maximum workpiece weight (with/without bath): 200/450 kg Best achievable surface: 0.2 µm Ra Available wire diameters 0.10 - 0.33 mm Incl. AGIE universal clamping frame Incl. AGIE JOGGER handbox Incl. console with USB connection The machine will be cleaned, overhauled and tested by us upon receipt of order. We are also happy to offer commissioning and training.

Year of construction: 1988, condition: used, Manufacturer: ONA Electro-Erosion, S.A. (Spain) Model: ONA-COMPACT 30 Year: 1988 Manufacturing Number: 5026/5912 Godpfx Alowf E Aus Aoud Registration Number: 5026/8812 Type: Electrical Discharge Machine (EDM) - Die sinking Voltage: 220 V Current: 5.6 A Pulse Power: 2 x 0.75 HP Apparent Power: 2.13 KVA Frequency: 50/60 Hz Estimated Table Travel: 300 x 200 mm Dielectric Tank Capacity: 100-150 L Approximate Weight: 1000-1200 kg

Condition: excellent (used), Year of construction: 2024, operating hours: 142 h, functionality: fully functional, machine/vehicle number: 395.900.219.1428, travel distance X-axis: 600 mm, travel distance Y-axis: 400 mm, travel distance Z-axis: 400 mm, workpiece weight (max.): 1,000 kg, total height: 2,858 mm, total width: 1,600 mm, total length: 2,845 mm, table width: 800 mm, table length: 400 mm, workpiece length (max.): 1,000 mm, workpiece height (max.): 400 mm, input voltage: 400 V, overall weight: 4,050 kg, year of last overhaul: 2026, Equipment: documentation/manual, For sale: AGIE CHARMILLES FORM E 600 EDM sinker machine (2024) We offer an AGIE CHARMILLES FORM E 600 EDM sinker machine from 2024, in very good technical and visual condition. Machine specifications: Manufacturer: AGIE CHARMILLES Model: FORM E 600 Year of manufacture: 2024 Type: EDM (electro-discharge machining) sinker machine Equipment: FORM E 600 sinker EDM center - System 3R Macro electrode holder - Automatic 6-position electrode changer Guodpfx Ajzclpnel Aod - High-speed C-axis - Heat exchanger - EMC/CE compliant version - Set of reference balls - Chiller - SPD surge protection system - System 3R 3R-656.21-SP03 measuring probe with a Ø 3 mm measuring ball - System 3R-628.31-S starter kit - Set of transport locks The machine is ready for operation and is an excellent solution for demanding applications in electro-discharge machining. We provide assistance with machine loading. If you have any questions or would like to obtain additional information, please contact us by phone or email.

Condition: used, TECHNICAL DETAILS - Travels on X/Y/Z axes : 400 x 300 x 350 [mm] - Rapid traverses rates (X/Y/Z) : 6 / 6 / 15 [m/min] - Min./max. distance between table and chuck : 170 / 520 [mm] - Max. part dimensions : 820 x 580 x 250 [mm] - Max. part weight : 800 [kg] - Max. electrode weight : 50 [kg] - C axis : 0 - 100 [rpm] Gedpfx Aswl Rh Nel Aeud POWER SUPPLY - Supply voltage : 400 [V] - Total installed power : 9.1 [kVA] WEIGHT & DIMENSIONS - Machine floor space : 4.700 x 2.750 [mm] - Machine height : 2.680 [mm] - Machine weight : 3.830 [kg] - Number of working hours : 13659 [h] EQUIPMENT - CNC : AGIEVISION 5 - Workpiece loading / unloading robot - Spindle nose : EROWA - Dielectric capacity : 600 [l]

Condition: used, TECHNICAL DETAILS - Strokes X x Y x Z : 350 x 250 x 350 [mm] - Max. part dimensions : 650 x 580 x 250 [mm] - Max. part weight : 400 [kg] - Machining intensity : 72 [A] - Tools magazine capacity : 28 - Dielectric volume : 415 [l] - Machine floor space : 2.689 x 1.855 [mm] - Machine height : 2.593 [mm] - Machine weight : 3.000 [kg] - Welding hours : 39.554 [h] EQUIPMENT - CNC AGIEVISION with color screen LCD : 10,4 ['] - Deported electronic crank-handle Guedpfx Aeuhcbiel Aed - Axis C - Spindle chuck : EROWA - Automatic retractable tank - Integrated filtration : DAI 2

Condition: excellent (used), Year of construction: 1997, operating hours: 16,100 h, functionality: fully functional, travel distance X-axis: 500 mm, travel distance Y-axis: 350 mm, travel distance Z-axis: 500 mm, workpiece weight (max.): 800 kg, total height: 3,000 mm, total width: 1,700 mm, total length: 2,840 mm, table width: 600 mm, quill travel distance: 500 mm, type of input current: three-phase, table length: 800 mm, feed length X-axis: 500 mm, feed length Y-axis: 350 mm, overall weight: 3,500 kg, tank capacity: 550 l, Equipment: documentation/manual, Agie Compact 3 CNC EDM machine for sale. 1997 machine Fitted with System 3R Macro chuck on C axis. 10 station tool changer 16100 machining hours Macro - mini chuck shown in picture not included in sale Gedpfxezhwy Uo Al Aeud

Condition: used, Year of construction: 2005, operating hours: 18,950 h, travel distance X-axis: 350 mm, travel distance Y-axis: 220 mm, travel distance Z-axis: 220 mm, Wire Diameter 0,1-0,3 mm Automatik Threading Working Hours 18950 Std Guodpfx Alewzyvhs Asd Verfahrwege X 350 mm Y 220 mm Z 220 mm U 350 mm V 220 mm Year 2005

Condition: used, Year of construction: 2008, operating hours: 5,900 h, travel distance X-axis: 350 mm, travel distance Y-axis: 220 mm, travel distance Z-axis: 220 mm, Wire Diameter 0,1-0,3 mm Automatik Threading Gsdowzyr Aepfx Al Aoud Working Hours 5900 Std Verfahrwege X 350 mm Y 220 mm Z 220 mm U 350 mm V 220 mm Year 2008

Condition: reconditioned (used), Year of construction: 2010, operating hours: 27,000 h, functionality: fully functional, workpiece weight (max.): 750 kg, travel distance X-axis: 350 mm, travel distance Y-axis: 220 mm, travel distance Z-axis: 220 mm, total height: 200 mm, total length: 205 mm, total width: 202 mm, wire diameter (max.): 0.3 mm, workpiece height (max.): 220 mm, workpiece width (max.): 550 mm, workpiece length (max.): 1,000 mm, type of input current: three-phase, empty load weight: 2,450 kg, Machine fully cleaned, inspected, and tested. Available for viewing at our premises in Semsales (Switzerland). Wire guides, 0.25 mm. Large bobbin kit. Gusdpfx Aljzf Akyj Asd

Condition: used, table length 400 mm table width 300 mm x-travel 300 mm y-travel 250 mm Gusdpsvwgq Sofx Al Asd z-travel 250 mm weight of the machine ca. 1,2 t dimensions of the machine ca. 2000 x 1200 x 2500 mm The machine is supplied with a wide range of accessories

Condition: ready for operation (used), Year of construction: 2002, travel distance X-axis: 500 mm, travel distance Y-axis: 350 mm, travel distance Z-axis: 426 mm, wire diameter (max.): 0.3 mm, overall weight: 3,900 kg, number of axes: 5, wire diameter (min.): 0.15 mm, This 5-axis AGIE Classic 3s wire EDM machine was manufactured in 2002. It features an X-axis travel of 500 mm, Y-axis travel of 350 mm, and Z-axis travel of 426 mm. The machine is equipped with a submerged head and includes a chiller, resin filters, and a wire feed/recovery system. If you are looking to get high-quality wire EDM capabilities, consider the AGIE Classic 3s machine we have for sale. Contact us for further details. • U/V axes travel: ±70 mm • Number of controlled axes: 5 (X, Y, Z, U, V) • Taper cut: up to ±30° • Generator: MC 3S (Lista 030.844) • Axis driver (DA): DA MC 3S (Lista 030.834) • Electrical cabinet: Cabinet Classic 3S (Lista 027.254) • Power supply voltage: 3×400 V / 50 Hz • Installed power: 9 kVA • Rated current: 14 A Gedpfx Ajy Ulp Tjl Aeud • Dielectric: Deionized water • Heads type: Submerged with wire guide nozzles • Wire drive motor: +GF+ / Maxon Motor (Swiss made) • Circuit diagram: 628.992 Additional equipment • MTA chiller (included in the sale) • Resin filters • Deionizers • Wire feed/recovery system

Condition: good (used), Year of construction: 1997, Parts shown by hand not come. Gujdpfx Alspy Errs Aed

Condition: repair required (used), Year of construction: 1987, EDM sinking machine, manufacturer AGIE, type: EMT 1.20, year of manufacture: 1987. Travel ranges: X 250 mm, Y 160 mm, Z 200 mm with R3 adjustable head. Further details can be found in the data sheet. Gedpfeix Nqhjx Al Aeud

Condition: used, Year of construction: 2004, Working range 1.050 x 650 x 250 mm max. workpiece weight 400 (800) kg control Agievision AGIE max. conicity 30° / 100mm travel -x axis 500 mm travel -y axis 350 mm travel -z axis 426 mm travel U x V-axis mm rapid traverse X-axis 3 m/min rapid traverse Y-axis 3 m/min rapid traverse U-axis 0,6 m/min rapid traverse V-axis 0,6 m/min rapid traverse Z-axis 0,6 m/min Guedjw Spa Njpfx Al Aed wire dia. 0,2...0,33 mm total power requirement 12,1 kVA weight of the machine ca. 3,9 t dimensions of the machine ca. 2,8 x 2,4 x 2,3 m Wire Eroding Machine AGIE - Agiecut Progress 3

Condition: ready for operation (used), Year of construction: 2015, travel distance X-axis: 600 mm, travel distance Y-axis: 400 mm, travel distance Z-axis: 400 mm, number of axes: 4, This 4-axis AgieCharmilles FORM 30 die-sinking EDM machine was manufactured in 2015. It features an X-axis travel of 600 mm, Y-axis travel of 400 mm, and Z-axis travel of 400 mm. If you are looking to get high-quality die-sinking capabilities, consider the AgieCharmilles FORM 30 machine we have for sale. Contact us for further details. Gedey T R D Hepfx Al Aeud

Condition: ready for operation (used), Year of construction: 2016, functionality: fully functional, machine/vehicle number: 0044, workpiece height (max.): 250 mm, workpiece width (max.): 750 mm, workpiece length (max.): 550 mm, feed length X-axis: 350 mm, feed length Y-axis: 250 mm, feed length Z-axis: 256 mm, The machine was manufactured in 2011, but it was not put into operation and modernized until 2016. As part of this process, an electrical update for the WorkPartner automation system was carried out! TECHNICAL DETAILS Workpiece weight max.: 200 kg Travel range X-axis: 1,800 mm Travel range Y-axis: 2,000 mm Travel range Z-axis: 1,100 mm Workpiece height max.: 250 mm Workpiece width max.: 750 mm Workpiece length max.: 550 mm Gedpezf E Nxjfx Al Asud Feed length X-axis: 350 mm Feed length Y-axis: 250 mm Feed length Z-axis: 256 mm MACHINE DETAILS Type of input current: Three-phase Dimensions & Weight Dimensions (L x W x H): 3,000 x 3,760 x 2,455 mm Total weight: 3,700 kg EQUIPMENT Documentation/Manual Cooling unit Note: The operating hours of the machine can be found in the last image.

Condition: ready for operation (used), Year of construction: 2005, travel distance X-axis: 350 mm, travel distance Y-axis: 250 mm, travel distance Z-axis: 250 mm, controller manufacturer: AGIE, number of axes: 3, This 3-axis AGIE Hyperspark 2 Exact with Erowa was manufactured in 2005. It features an X-axis travel of 350 mm, Y-axis travel of 250 mm, and Z-axis travel of 250 mm. The machine is equipped with AGIE VISION 4 Software and includes an EROWA ROBOT MULTI with 60 ITS 148 places and 240 ITS 50 magazine places. If you are looking to get high-quality die-sinking EDM capabilities, consider the AGIE Hyperspark 2 Exact machine we have for sale. Contact us for further details. Guedpfxsy S A Dcs Al Asd • EROWA ROBOT MULTI with 60 ITS 148 Places and 240 ITS 50 Magazine Places

Condition: like new (used), Year of construction: 2014, AGIECHARMILLES FORM 300 wire erosion machine, manufactured in 2014. Travel: X 600, Y 400, Z 450 Gsdpjzd D Nhjfx Al Ajud Table size: 750 x 600 mm. Working tank dimensions: 1,220 x 870 x 470 mm. Linear guides. Maximum workpiece weight: 1,600 kg. ISPG 80 A generator. EROWA ITS head. C-axis. 6-electrode changer. Dielectric fluid tank: 700 liters. Filtration system with 6 paper cartridges.

Condition: excellent (used), Year of construction: 2003, functionality: fully functional, travel distance X-axis: 500 mm, travel distance Y-axis: 350 mm, travel distance Z-axis: 500 mm, overall weight: 3,600 kg, EDM MACHINE AGIE CHARMILLES AGIETRON IMPACT 3 WITH C AXIS TRAVEL X AXIS: 500 mm TRAVEL Y AXIS: 350 mm TRAVEL Z AXIS: 500 mm TRAVEL C AXIS: 360° TABLE SIZE: 800 x 600 mm TANK DIMENSIONS: 1100 x 730 x 400 mm Guodpfx Asy Rd Imjl Aod ELECTRODE CHANGER: 28 POSITIONS ACCESSORIES: EROWA SYSTEM

Condition: used, Year of construction: 2002, Voltage: 400V / 50/60Hz / 3 phases Machining method: Immersion Maximum workpiece size: 1200x700x400 mm Maximum workpiece weight: 1500 kg Table dimensions: 900x600 mm Distance from floor to table: 900 mm Total dielectric fluid volume: 1200 L Axes X, Y, Z, U and V Travel ranges X, Y, Z: 550 x 350 x 400 mm Travel ranges U, V: 550 x 350 mm Collision protection: Axes X, Y, U, V, Z Tapered cutting, max. taper: +/- 30° / 400 mm Available wire diameters: Ø 0.25 mm (Option 0.1/0.2/0.3 mm) Wire guide type: Closed diamond guide, gap-free Available spool weight and type (DIN standard): 1.6 kg (K 100) to 8 kg (K 160) Available spool weight and type (JIS standard): 3 (P3) to 5 kg (P5) Dielectric fluid Paper filter: 2 cartridges Dielectric fluid temperature: +/- 1°C Gujdpfx Asza U Nlel Aed Total volume of ion exchange resin: 20 L Maximum injection pressure: 20 bar Generator: Dual source Isopulse Total power: 10 KVA Maximum cutting speed: 400 mm²/min Minimum surface roughness: 0.20 microns Ra Measuring system: Glass scales Measuring resolution: 0.5 microns Servo motors: AC type All technical specifications are subject to change without notice; errors and omissions excepted. The machine was fully functional until it was dismantled. Warranty is excluded.

Year of construction: 1998, condition: ready for operation (used), X-axis: 500mm, y-axis: 350mm, z-axis: 256mm, taper cutting device: U=70mm, V=70mm, connected load: 9kVA, rated current: 13.1A, weight: 4.4t, equipment: automatic wire threading, lowering water tank, universal clamping frame, hand-held control unit, AgieSetup 3D automatic workpiece position compensation, flushing gun, paper cartridge filter and Lei/Wirecut programming software with dongle. An on-site inspection is possible. Gujdszadkxopfx Al Asd

Year of construction: 2004, condition: ready for operation (used), Number of axes: 4, x-axis: 400mm, y-axis: 300mm, z-axis: 350mm, connected load: 8.3kVA, rated current: 12A, weight: 3t, equipment: rotary quill, controlled C-axis, CNC conversational control system with 4 axes, hand-held control unit, tool holder: Erowa ITS quick-clamping chuck, 20-position electrode changer, paper cartridge filter. An on-site inspection is possible. Gsdpfszadk Eox Al Asud

Condition: reconditioned (used), Year of construction: 2013, Equipment: fridge, AGIECHARMILLES CUT400 wire EDM machine, manufactured in 2013. Travel: X 800, Y 550, Z 510, U 800, V 550 mm. Maximum taper: 30°/510 mm. Maximum workpiece dimensions: 1,300 x 1,000 x 510 mm. Guedezbimhjpfx Al Aed Maximum workpiece weight: 3,000 kg. Threading height up to 510 mm. Available wire diameters: 0.10 - 0.33 mm. Best surface finish: 0.20 Ra. Wire spools up to 25 kg. CHILLER UNIT. Dielectric volume: 1,700 liters. INCLUDED SOFTWARE: TAPER-EXPERT, CT-EXPERT, PROFIL EXPERT, POWER EXPERT, SURFACE EXPERT. Wide selection of technologies for the most common workpiece/wire materials.