Used Agra for sale (1,039)

Condition: as good as new (ex-display), This is an entry ramp for oven trolleys of the combi steamers type 202 from Rational. This ramp fits all combi steamers from the Index E. to Index I. series. With this ramp, slopes (up to 3%) in the kitchen floor can be compensated. This ensures that the rack trolley enters the Rational appliance without any jolts. The indicated price is net plus 19% VAT. Our service for you: -High-quality brand equipment at fair prices -Professional overhaul / inspection & professional cleaning -tested & fully functional - or money back -Dispatch or self-collection flexibly selectable -Competent advice - before and after purchase -provision of operating instructions, connection diagrams & spare parts -Inspection according to DGUV V3 seal -Article number: 60.22.181 Condition: Used Ihedpfxjmf Ti Ts Adwet Dispatch / Shipping: -Delivery or pickup by arrangement. -Worldwide shipping on request / Worldwide shipping on request -Shipping to islands or mountain stations only after consultation You have questions, wish a consultation or would like to look at something on site ? You can reach us by phone during our opening hours: Monday-Friday 09:00 - 13:00 and 14:00 - 17:00. The sale takes place exclusively to our general trading conditions (AGB)

Condition: used, Used Silverson model GX20 stainless steel multi-purpose high shear mixer. - 4-blade mixer direct driven by a 15 kW, 2960 rpm, 50 Hz motor - has installed General Purpose Desintagration Head with inner diameter approx 118 mm (plus spare Emulsor Head) Ihodpfx Asx Rypyjdwjt

Condition: like new (used), functionality: not functional, load capacity: 6,500 kg, Load capacity 6500 kg Please note: Arm diameter adjustable from 1880 mm to 4550 mm (swivel-out) Space-saving and continuously adjustable, the extension arms can be locked in place Ihodpfx Aox Thucedwjt Speed continuously adjustable from 0.001 to 5 rpm Motor power 3 kW Torque 15000 Nm Height 800 mm Maximum current transmission 2000 A Weight 4700 kg with hand and double-foot remote control CE certificate, declaration of conformity, documentation, circuit diagram with original 2016 quotation invoice Current new price approx. €28,000

Condition: ready for operation (used), Year of construction: 2006, operating hours: 976 h, overall weight: 7,000 kg, spindle motor power: 28,000 W, number of axes: 4, This 4-axis CHIRON FZ 18 L was manufactured in 2006, featuring a robust 2000x520x600mm working area and a powerful 28 kVA system. With only 976 hours since control system replacement, it's a reliable choice for precision machining. Consider the opportunity to buy this CHIRON FZ 18 L vertical machining centre. Contact us for more information about this machine. • Power supply: 3/N7PE 50/60 Hz Iodpfx Aex E Eatjdweht • Operating voltage: 400 V • Control voltage: 230/24 V • Power: 28 kVA • Rated current: 40 A • Operating hours since control system replacement: 976 hours 45 minutes • Fuse: 50 A • Circuit diagram: 189 731 11 01

Condition: used, Year of construction: 2000, greates pass round over bed 520 mm swing diameter over bed slide 480 mm turning length 3000 mm control 840 D SIEMENS number of tools 12 Driven tools - quantity 6 spindle bore 103 mm Iodpfxewp S Sqj Adwjht c-axis ja 0 Scope of delivery of the basic machine: SINUMERIK 840 D 3 controlled axes Rotation Ø over bed 520 mm Turning Ø over bed slide 480 mm Tool carrier with 12 cylindrical shank holders Ø 50 mm 1-stage AC main drive, 53 kW, 50 % ED Speed range 30 - 3000 min-¹ Main spindle head size 8 Clamping door for clamping devices chip conveyor THREE-DIMENSION 3000 mm 12 cylindrical shank holders DIN 69880-50x78 of which 6 positions can be equipped with driven tools, Power 6 kW at 60 % ED, speed range 20-2500 min-¹ 2 gear stages C-AXLE Speed range 0-20 min-¹ Max. Angle specification 9999.999° Working range according to work area diagram POWER CHUCK 3 NHF 315-82 A8 FABR. FORKARDT with centrifugal force compensation, Outer Ø 315 mm, bore Ø 82 mm, with hard top jaws, ground, rod material Ø max. 63 mm including draw tube and attachment

Condition: used, machine/vehicle number: YS2R6X2000553xxxx, mileage: 1,50,000 km, Year of construction: 2019, Please contact ATS Norway for more information Please provide reference number upon request: 18545 Ihodsvg Aivjpfx Adwst Specifications: EU-approved for delivery Model year: 2019 Mileage: Approx. 160,000 km Transmission: Automatic Tires: See pictures Emissions: Euro 6 Flatbed length: Approx. 630 cm Total length: 1,096 cm Width: 255 cm Wheelbase: 475/135 cm Towbar: Yes Reversing camera: Yes Stabilizing legs: Yes Drive: 6x2 Engine power: 500 hp Bullbar: Yes LED bar: Yes Toolbox: Yes Bed: Yes Radio/CD: Yes Climate/AC: Yes Crane Specifications: Crane: Hiab 477E-7 Hipro from 2019 Certification: Delivered with new certification Outreach: 7+6 Jib: Yes Crane diagram: Yes Remote control: Yes Description: 2019 Scania R500 6x2 crane truck with a Hiab 47 t/m crane and 7+6 outreach, equipped with a jib. Both the truck and crane come with new certification. The flatbed length is 630 cm. Quick delivery available. Km: 150000 HK: 500 Technical approved: Yes EU-approved until: 26.09.2026 Own weight: 20374 Total Weight: 30000 Payload: 9551 Width: 255 Length: 1096 Euro: 6 Model: R500 Gearbox: Automatic

Condition: ready for operation (used), functionality: limited functionality, drilling depth: 710 mm, rotational speed (max.): 1,250 rpm, spindle diameter: 100 mm, table length: 1,120 mm, table width: 1,250 mm, Placing a bid obligates you to collect the machine by the deadline of 28.01.2026! Prompt scheduling of an appointment is necessary after the end of the auction, as the machine has not yet been dismantled! TECHNICAL DETAILS Working spindle diameter: 100 mm Taper bore of working spindle: ISA steep taper No. 50 Drilling depth in one stroke: 710 mm Lowest position of spindle center above table surface: 0 mm Highest position of spindle center above table surface: 1,200 mm Maximum distance between spindle sleeve and tailstock: 2,300 mm Horizontal travel of tailstock: 1,300 mm Spindle speed: 6 - 1,250 rpm Clamping surface of the table: 1,120 mm x 1,250 mm Longitudinal travel of the table: 1,300 mm Cross travel of the table: 1,200 mm 34 feeds for spindle, headstock, and table: 0.017 - mm/rev Stepless feeds for headstock and table: 20 - 1,000 mm/min Rapid traverse in all directions: 2,800 mm/min Ijdpfx Adjx Hfugowjht MACHINE DETAILS Main motor power: 11 kW Main motor speed: 1,450 rpm Power supply: Three-phase current Voltage: 380 Volt Frequency: 50 Hz EQUIPMENT Documentation incl. wiring diagram Electrical diagrams Operating manuals Note: Brake defective, clutch removed (included). Repair costs in Germany approx. €3,000.

Condition: used, L + Z Lathe ZMM - SLIVEN (Bulmak - Bulgaria) Type CU 325 Machine No.: 8169 Year of manufacture: 2002 Centre distance: 1000 mm Swing over bed: 320 mm Centre height over bed: 160 mm Swing over cross slide: 190 mm Centre height over cross slide: 95 mm Spindle bore: 32 mm Ihodpfxovt U Tms Adwst Spindle speeds (forward): 85 - 2000 rpm, 12 steps Spindle speeds (reverse): 130 - 1300 rpm, 6 steps Feeds: longitudinal and cross Chuck flange: short taper DIN 55027 size 5 Tailstock quill taper: MT 3 Drive power: 2.2 kW Power supply: 400 Volt, 50 Hz - 3-axis digital readout RSF, type Z 730 - Spindle speed adjustable in machining direction via 12 gearbox steps - Spindle speed adjustable in counter direction via 6 gearbox steps - 3-jaw chuck BISON Ø 160 mm with 1 set of stepped jaws - 4-way universal tool post - Coolant tank with pump integrated in machine base - Spindle brake operated via direction lever - Emergency stop via foot pedal and emergency switch - Foldable chuck guard - Machine lamp - Splash guard - Travelling steady rest - Quick-change drill chuck with MT 3 taper - Multiple change gears - Operating manual with electrical diagram Installation dimensions (L x W x H): 2100 x 800 x 1600 mm Weight: 750 kg Good condition

Condition: new, Year of construction: 2022, functionality: fully functional, machine/vehicle number: S20185, The DMK 20 C2 table cutter is NEW, UNUSED STOCK. Due to its compact, robust, and precise construction, it is the ideal table cutter for small to medium-sized meat processing companies, high-end gastronomy, as well as large kitchens and catering services. The well-thought-out design gives the user virtually unlimited application possibilities in all areas. The machine is equipped with two independently operated, powerful motors, allowing for versatile control. The optionally available robust, mobile base frame ensures the mobility you need. The net weight of 260 kg speaks for itself—an absolute professional-grade machine! A bargain for the expert! You will receive an invoice with VAT shown separately. Our used equipment service for you: • 6-month warranty on all electrical parts • High-quality branded appliances at fair prices • Professional overhaul/inspection & expert cleaning • Tested & fully functional—or your money back • Shipping or self-collection—flexible options • Competent advice—before and after purchase • Provision of operating manuals, wiring diagrams & spare parts • Inspection according to DGUV V3 Ihodpfxow N Ipke Adwet Professional engineering in the tightest space: The DMK 20 C2 table cutter impresses with its extremely smooth and low-vibration operation, even at high speeds. The complex manufacturing of the individual components is carefully and precisely matched. The thick-walled, high-grade stainless steel cutting bowl offers extremely accurate concentricity, allowing the cutter knives to be set very close to the bowl radius. Applications: Machine specifications: • All stainless steel construction • Solid cast stainless steel bowl (bowl capacity: 20L) • High-precision, maintenance-free cutting unit • Stainless steel knife head with 6 knives • Tight cutting clearance in the bowl radius • High stability • Extremely low-vibration operation • Vibration-damping machine feet • Cutter lid made of Plexiglas • Analog, easily readable thermometer • 6 stainless steel knives, 7 stainless steel filler rings, two bowls Drive & control: • Separate knife shaft drive with electromagnetic brake • Brake release function via push button for cleaning with lid open • Separate bowl drive with directly flanged, maintenance-free gearbox • Two speeds, independently switchable • User-friendly, large push buttons with hygienic protective covers Safety features: • Spill guard according to UVV • Interlock guard according to UVV • Noise protection lid • Electromagnetic brake • EMERGENCY STOP function • Machine meets HACCP • Machine meets UVV • BG certified Technical data: • Bowl volume: 20L • Useful capacity for fine sausage meat (approx. kg): 16kg • Number of knives: 6 • Speed (rpm): 1500/3000 • Knife shaft power (kW): 3.3/4.5 • Mains voltage (V): 400 • Control voltage (V): 24 • Fuse protection (A): 16 (slow-blow) • Dimensions (W x D x H): 83cm x 80cm x 63cm • Weight: 260 kg Options: • Mobile base frame • Serial number: S20185 • Year of manufacture: 2022 • Type: DMK 20 C2 Condition: New

Condition: ready for operation (used), Year of construction: 2011, controller manufacturer: SIEMENS, spindle speed (max.): 10,000 rpm, spindle motor power: 17,000 W, number of axes: 3, This 3-axis HELLER MC 2000 was manufactured in 2011 and features a robust three-phase motor spindle, delivering 17 kW at 10,000 rpm with a SK 40 tool holder. It includes a 2-axis servo tool changer, a stationary tool magazine with 54 positions, and a pallet changing device with 2 pallet positions. If you are looking to get high-quality milling capabilities, consider the HELLER MC 2000 machine we have for sale. Contact us for more information about this machine. Additional equipment • Scraper belt conveyor for dry machining • Cold light in the work area • Central cooling unit for motor spindle and control cabinet, CFC-free Machine Benefits Technical Machine Benefits • Central cooling unit for motor spindle and control cabinet, cfc-free • Design according to ce standards • Paint finish: gray-white / anthracite gray / dust gray / heller red • Control cabinet with integrated control, regulation, and power unit • Operating voltage 400v / 50hz, voltage range +/- 10% // control voltage 24v dc • Increased spindle power with power cutting at 240 nm • Axis dynamic power • Full machine enclosure including cover • Automatic central lubrication • Hydraulic system Extra Information Operating instructions include: Operating instructions Control-specific documents Maintenance instructions Spare and wear parts list Supplier instructions Fluid diagrams and electrical diagrams Three-phase motor spindle package with hollow shaft motor, 17 kW at 40% duty cycle, 10000 rpm in asynchronous technology, SK 40 tool holder according to DIN 69 871, Form A, AD and B, for pull studs according to DIN 69872 Form A and B Adjustable, maintenance-free three-phase feed drives Direct position measuring system in the X, Y, Z, and B axes Movement 2-axis servo tool changer Stationary tool magazine with 54 tool positions and fixed position coding Control panel at the workpiece setup station Iedpfxox D Nbpj Adwoht NC rotary table with 360000 x 0.001° pitch Pallet changing device with 2 pallet positions Workpiece Setup station, manually rotatable 4 x 90° The machine has been measured.

Condition: new, Year of construction: 2025, The Cormak M200S sander is a professional tool with high performance and precision. Equipped with a powerful drive motor, it provides fast and efficient grinding of various materials. The rotor design based on ball bearings ensures motor reliability and quiet operation. Plastic guards protect against sparks. This is a versatile tool that is easy to use thanks to the speed control and ergonomic handle. Ideal for professionals and hobbyists. Ihedjvlkttjpfx Adwot Features of the M200S disc grinder The Cormak M200S grinder is a professional grinding tool that offers an excellent combination of high performance, precision and durability. Thanks to the rotor design based on ball bearings, this grinder guarantees motor reliability and quiet operation, which is important for both intensive use in the workshop and in domestic applications. The powerful drive motor of the Cormak M200S sander is equipped with high torque, which translates into efficient material removal and a fast surface finish. The number of revolutions provides the optimum sanding speed for a variety of materials. The motor power of 0.9 kW allows efficient material removal and rapid achievement of the desired results. Designed for use with 400 volts, ensuring stable power supply and efficient operation. Regardless of the type of material, be it wood, metal or plastic, this sander will meet all requirements. Equipped with a 200x32 mm fi sanding disc, it enables larger surfaces to be sanded efficiently. An important aspect that contributes to work safety is the Cormak M200S sander's plastic guards. As well as providing protection from sparks, the guards are lightweight yet robust, making them easy to manoeuvre and reducing operator fatigue. In addition, the intuitive control panel provides convenience and ease of use. If you are looking for a professional sanding tool that offers reliability, high performance and precision, the Cormak M200S sander is an excellent choice. Its robust construction, powerful motor, protective guards and ability to connect a dust extraction system make it an indispensable tool in the workshop, carpentry shop or during renovation work. Check the specifications and compare prices to find the best deal for your needs. Technical specifications of the M200S disc sander SIZING DIAGRAM 200 x 32 mm disc or grinding wheel opening 32 mm DISC GRANULATION K 36 / K 60 RPM NUMBER 2850 rpm MOTOR POWER S1 0,9 kW MOTOR POWER S6 1,5 kW VOLTAGE 400 V DIMENSIONS 520x300x1130 mm WEIGHT 26 kg

Condition: used, machine/vehicle number: ZN3D070D70904xxxx, mileage: 1,50,000 km, Year of construction: 2021, Please contact ATS Norway for more information Ihjdpjx A R Nrsfx Adwjt Please provide reference number upon request: 21965 Specifications: - Eu-approved until 06.05.2026 - Km: Approx. 150,000 (may increase) - Transmission: Automatic - 4x4 - Engine brake - Length plan: 4.26 m - Trailer hitch - Palfinger PK7.501 SLD C crane - Remote control - Crane diagram - Crane reach: 11 meters hydraulic - Approved until 07.26 - Tool cabinet - Euro 6, 180 hp - Good tires - Radio/CD - Air conditioning/AC - Service agreement with Iveco - Delivery by agreement Description: Iveco Crane truck with four-wheel drive. The truck is equipped with a 7.5 t/m Palfinger crane. Both truck and crane are approved. delivery by agreement. Km: 150000 HK: 180 Technical approved: Yes EU-approved until: 06.05.2026 Own weight: 5130 Total Weight: 7000 Payload: 1795 Width: 230 Length: 750 Euro: 6 Model: 70W 4x4 Kranbil m/ Palfinger PK7.501 Gearbox: Automatic

Condition: reconditioned (used), Year of construction: 2002, operating hours: 44,590 h, functionality: fully functional, pressing force: 200 t, filling opening width: 1,020 mm, filling opening length: 2,000 mm, bale width: 1,100 mm, bale height: 1,100 mm, oil tank capacity: 3,100 l, power: 150 kW (203.94 HP), year of last overhaul: 2025, Technical data baler: Manufacturer MACPRESSE EUROPA S.R.L. Typ 112 Year of construction 2002, partially refurbished in December 2025 Operating hours 44,590 hours, stand December 2025 Press power main press 200 tons Specific press capacity 16,5 kg/cm² Feed channel 2,000 x 1,020 mm Iodpfx Adox Dnb Ueweht Filling volume 2,65 cm³ Theoretic throughput rate 795 m³/h Bale size 1,100 x 1,100 mm, length variable Driving motor 2 x 75 kW Tying system 5-fold horizontal, full automatic Throughput rate at MSW approx. 48 up to 54 tons/h, depends on material Volume hydraulic oil tank 3,100 l Machine weight baler approx. 50,8 tons Scope of delifery: 1 piece baler MACPRESSE, type 111A 1 operating manual with CE declaration, electrical and hydraulic circuit diagram Comments: The machine was serviced and partially overhauled in our workshop. The following work was carried out and parts replaced: • Hydraulic oil tank emptied and cleaned • Oil and air filters replaced • New hydraulic oil filled • All hydraulic hoses replaced • Press ram dismantled, broken down into individual parts, mechanics made operational • Front two main rollers replaced • Knives on the press ram replaced • Main hydraulic cylinder dismantled, disassembled, cylinder tube and piston rod checked, complete seal set replaced • Counter knife in the frame replaced • Knife gap adjusted to approx. 3 mm • Upper steel guide rails in the frame on the left and right replaced. • Worn press base cut out, base plate replaced with wear-resistant HARDOX steel. • Binding and twisting unit dismantled, broken down into individual parts, mechanics made functional, all twisting shafts and ball bearings replaced. • All wire rollers in the needle heads replaced • Wire knives cleaned and readjusted, chains greased and tensioned • All wire deflection rollers made operational • All door contact switches replaced • Wirbulator device dismantled, disassembled and made operational • General maintenance work carried out Finally, the press was subjected to a machine test in manual and automatic mode, see our video for the machine function test. The documentation (BA, CE, electrical/hydraulic circuit diagram) is complete. Viewing is possible by appointment. We accept no liability for the technical specifications or any errors.

Year of construction: 2014, condition: excellent (used), Refrigerating chamber for EUR 6 PAL. Dimensions 5.9m x 1.6m x 2.34m, the rest on the attached diagram. Freight costs depend on the weight, volume and above all on the distance, the following information is relevant for inquiries: Delivery address (postcode and name of the town), but further details require a telephone call, so we ask you to inquire about transport costs and other delivery modalities to contact us by phone. Our contact details can be found under the legal information of the seller. Payment in cash, possible upon delivery on site. Iodstu I A Ropfx Adwsht We sell and export worldwide, due to our very large storage capacity we can also deliver larger quantities flexibly and quickly. Please contact us before purchasing. We issue intra-community invoices - excluding VAT. opening hours Mon-Fri: 8 a.m.-4 p.m. sat .: closed

Year of construction: 2013, condition: refurbished (used), functionality: fully functional, This is an SCC 61 combi steamer from the premium manufacturer Rational, electric version. This combi steamer is equipped with a hanging rack for 6 shelves. The unit has been fully overhauled in our in-house workshop and is in full working order. It is offered with a 6-month warranty on all electrical parts. The base stand pictured is not included in the offer, but can be purchased optionally. An invoice with VAT shown separately will be provided. Service: We are happy to assist in arranging a certified Rational service partner. Are you looking for a specific Rational device type? Contact us—we have access to a wide range of used and new equipment. We are happy to advise you on all device types, whether SCC, CM, CMP, VCC, iVario, iCombi Classic, and Pro. Our used equipment service for you: - 6 months warranty on electrical parts, limited to replacement of defective parts, excluding installation/removal costs - High-quality branded equipment at fair prices - Professional refurbishment/inspection & expert cleaning Ihjdpex S Epnefx Adwet - Tested & fully functional—or your money back - Flexible shipping or collection options - Competent advice—before and after purchase - Provision of user manuals, wiring diagrams & spare parts - Electrical safety check according to DGUV V3 This combi steamer provides space for 6 x 1/1 GN containers. In automatic mode, the unit independently detects the ideal cooking path for 7 applications (meat, fish, poultry, side dishes, egg dishes, baked goods, and finishing), as well as the size of the food, loading quantity, and product-specific requirements. Technical data: - Dimensions (W x D x H): approx. 847 x 776 x 782 mm - Power supply: V: 400 / kW: 11.0 / Hz: 50/60 - Capacity: 6x 1/1 GN - Weight: approx. 103 kg - Serial number: E61SH13042345756 - Year of manufacture: 2013 Condition: used, fully functional Further information: - With careControl - self-cleaning system - In combi-steamer mode, three operating modes are available: steam (30°C to 130°C), hot air (30°C to 300°C), and combination (30°C to 300°C) - Core temperature probe - Handshower with automatic retract - 8.5" color display and touchscreen - 5 programmable fan speeds - Integrated, maintenance-free fat separator - Automatic start time preselection - 7 cleaning levels for unattended cleaning—including overnight - Steam injection adjustable in 3 levels—from 30°C to 260°C - 5 programmable proofing stages - USB interface - Seamless, basin-shaped hygienic cooking chamber with rounded corners - Halogen cooking chamber lighting Shipping: - Delivery or self-collection by arrangement - Worldwide shipping on request - Shipping to islands or mountain stations only by arrangement Subject to changes and errors. If you have any questions, require advice, or would like to view the equipment locally, you can reach us by phone during our business hours: Monday–Friday 09:00 - 13:00 and 14:00 - 17:00. Sale is carried out exclusively under our general terms and conditions (GTC).

Condition: as good as new (ex-display), Year of construction: 2022, operating hours: 100 h, functionality: fully functional, machine/vehicle number: CM18355, overall weight: 2,900 kg, input voltage: 400 V, power: 5.5 kW (7.48 HP), type of input current: three-phase, punching force: 63 t, control type: PLC-controlled, degree of automation: automatic, actuation type: electric, Equipment: CE marking, centralized greasing system, documentation/manual, emergency stop, foot remote control, ECCENTRIC PRESS OMERA Model: 63 R4 Basic Technical Data Nominal force: 630 kN Motor power: 5.5 kW Strokes per minute: 45–104 Slide stroke: 9–120 mm Clearance between table and ram: 310 mm Table dimensions: 750 × 570 mm Ram dimensions: 500 × 350 mm Table thickness: 65 mm Table opening: 165 mm Machine weight (approx.): 4,600 kg Machine dimensions (for transport): 2806 × 1244 × 1492 mm Ijdpfx Adexqp Sbewjht Power supply: 380 V / 50 Hz / 3 Ph Machine color: RAL 7035 (light grey) / moving parts RAL 5017 (blue) Machine Equipment Centralized lubrication system PLC: SCHNEIDER with control panel Inverter for adjustable press speed Pneumatic clutch Balancing cylinders Hydraulic overload protection system VPN connection for remote access Additional Equipment Additional work plate 750 × 570 × 65 mm (1 pc) Vibration dampers (1 set) Work area lighting (1 set) Tool protection and press operation monitoring system Machine Details Serial number: CM18355 Year of manufacture: 2022 Operating hours: approx. 100 Condition: Machine used only for demonstration and tool testing Documentation Complete documentation in Croatian language (printed and digital) Electrical and hydraulic diagrams CE Declaration of Conformity Disassembly, preparation, and loading for transport: approx. 1,500 EUR

Condition: used, machine/vehicle number: YV2XZX0C9JA82xxxx, mileage: 1,96,000 km, Year of construction: 2018, Please contact ATS Norway for more information Please provide reference number upon request: 21687 Truck specifications: Km: 194,000 Gearbox: I-Shift Full air suspension Euro 6, 460 hp 3-step Volvo engine brake Maintained under Volvo service contract Platform length: 6.5 m 2-ton liftgate, Zepro with remote control Tow hitch VBG coupling Lift bogie with steering Toolboxes on both sides Side boards Ihodpfxsxr Tvms Adwjt Rotating beacon bar Extra lights Sleeper bunk Good tires Radio/CD Climate control / AC Crane specifications: HMF 2120 from 2017 Crane hours: approx. 1300 Crane diagram Reach: 17.1 meters Max lifting capacity: 3820 kg Remote control Support legs 3rd function on crane / extra hydraulic outlet for tools in the hook Description:Well-maintained Volvo FM450 crane truck from 2018.The truck is equipped with a 21 t/m HMF crane and a 2-ton liftgate.Remote control for both crane and liftgate.Ready for delivery. Km: 196000 HK: 459 Technical approved: Yes EU-approved until: 17.10.2026 Own weight: 14555 Total Weight: 28000 Payload: 13370 Width: 255 Length: 1000 Euro: 6 Model: FM450 Kranbil m/ 21 t/m HMF kran og Løftelem. 194 000 km!

Year of construction: 2018, condition: refurbished (used), functionality: fully functional, This is a tilting cooking kettle from the premium manufacturer Elro, model JRW2, with a capacity of 140 liters. The kettle is equipped with a one-pot agitator featuring knives, suitable for processing tough and coarse food products. The device is in absolutely unused condition. The cooking kettle has been tested in our in-house specialist workshop and is fully functional. The stated price is net, plus 19% VAT. The purchase price in 2018 was €36,000. Our used equipment service for you: • 3 months warranty on all electrical parts • High-quality branded equipment at fair prices • Professional refurbishment / inspection & expert cleaning • Tested & fully functional – or your money back Ihodpsq Iwkuefx Adwjt • Flexible delivery or collection options • Competent advice – before and after purchase • Provision of operating manuals, wiring diagrams & spare parts • DGUV V3 safety inspection sticker Technical data: • External dimensions (W x D x H): 800 x 800 x 880 mm • Electrical connection: 400V 50Hz 3NPE 21.9 kW • Usable capacity: 139 liters • Model: JRW2-140-EID.H-86.0-S • Serial number: 705599 • Year of manufacture: 2018 • Incl. integrated agitator Condition: Used, tested, and fully functional Shipping: • Delivery or collection by arrangement • Worldwide shipping on request • Shipping to islands or mountain stations only by arrangement Do you have questions, need advice, or would like to view something on-site? You can reach us by telephone during our business hours: Monday to Friday, 9:00 am to 1:00 pm and 2:00 pm to 5:00 pm. Sales are conducted exclusively in accordance with our general terms and conditions (GTC).

Condition: used, machine/vehicle number: YV2RT60G3JA83xxxx, mileage: 1,36,000 km, Year of construction: 2019, Please contact ATS Norway for more information Please provide reference number upon request: 19582 Truck specifications: - Km: Approx. 136,000 - Transmission: Automatic - Suspension: Steel - Air - 10 ton front axle - Retarder - Euro 6 - Okay tires - Extraction - Length of plane: Approx. 6.5 m - 8x4 - Trailer hitch - VBG - Hydraulic underrun barrier - 551 HP - Turn on 4 - Support legs - Tool cabinet - Bed - Radio/CD - Air conditioning/AC - Silver agreement with Volvo since new (still going on) Crane specifications: - 2018 HMF 5020K - Hour meter PTO: Approx. 3320 - Support legs - Approved until 10.2026 - FJ-1000 Jib - Crane diagram - 6 5 hydraulic extensions - Videos Description: Well-maintained Volvo FH540 Tridem crane truck from 2019. The truck is equipped with a 50 t/m HMF crane with Jib. Iedox Izrkopfx Adwjht Only 136,000 km and 3320 PTO hours. It has been under a lease agreement since new and is still going strong. Ready for delivery. Km: 136000 HK: 550 Technical approved: Yes EU-approved until: 12.04.2026 Own weight: 20870 Total Weight: 37000 Year controlled until: 10.25 Payload: 16055 Width: 255 Length: 1046,3 Euro: 6 Model: 2019 Volvo FH540 8x4 Tridem Kranbil m/ 50 t/m HMF kran m/ Jibb. Lite km og krantimer! Gearbox: Automatic

Condition: used, machine/vehicle number: VF611J160GD00xxxx, mileage: 4,50,000 km, Year of construction: 2016, Please contact ATS Norway for more information Please provide reference number upon request: 21660 Specifications:• Km: 450,000• Transmission: Automatic• Suspension: Steel front, air rear• Euro 6, 388 hp• Engine brake• Platform length: Approx. 6 meters• 4x2• Tow hitch• Clutch and catalytic converter replaced around July 2024• Palfinger PK 19.001 SLD• Delivered fully certified• Reach: 14.5 meters• Crane hours: 1,150• Crane diagram• Remote control• Support legs• Rotating beacon bar• Tires (see pictures)• Bed• Serviced twice a year• Radio/CD• Climate control / AC• Ready for delivery Ihsdjxq Dbqopfx Adwot Description:Renault T380 6x2 crane truck from 2016.Both truck and crane are delivered with new approval.Equipped with a 19 t/m Palfinger crane.Serviced twice a year. Km: 450000 HK: 387 Technical approved: Yes EU-approved until: 11.08.2026 Own weight: 11890 Total Weight: 22000 Payload: 10035 Width: 255 Length: 952 Euro: 6 Model: Renault T380 6x2 Kranbil m/ 19 t/m Palfinger Gearbox: Automatic

Condition: used, machine/vehicle number: WMA30SZZ9HP09xxxx, mileage: 3,50,000 km, Year of construction: 2017, Please contact ATS Norway for more information Please provide reference number upon request: 21818 Ihsdpfxsxxpvis Adwot Specifications: EU-approved until 28.02.2026 Mileage: approx. 350,000 km Transmission: Automatic Air suspension Good tires Euro 6, 500 hp Platform length: approx. 6.58 m Trailer hitch VBG coupling 6x4 Compressor horn Tool cabinet Extra lights Bunk bed Radio/CD Climate control / AC Crane Specifications: 2017 Palfinger PK 19.001 SLD Crane diagram Remote control Outriggers Approved until 02.2026 Description:Well-maintained MAN crane truck from 2017.Equipped with a 19 t/m rear-mounted crane from Palfinger.EU-approved and ready for delivery. Km: 350000 HK: 500 Technical approved: Yes EU-approved until: 28.02.2026 Own weight: 11340 Total Weight: 28000 Payload: 16585 Width: 255 Length: 924 Euro: 6 Model: TGS 26.500 6x4 Kranbil m/ 19 t/m Bakmontert kran. SE VIDEO Gearbox: Automatic

Condition: used, Year of construction: 2019, operating hours: 340 h, Field of application: Construction Please contact ATS Norway for more information Please provide reference number upon request: 21806 Specifications: Delivered certified Model year: 2019 Hours: 340 Boom length: 30.7 metres Hook height: 29.8 metres Lifting capacity: 1500 kg 1 extension Ihjdpfx Adoxw Nlhswet Crane diagram Remote control Description:Klaas trailer crane with a hook height of 30 metres.It has only 340 operating hours and will be delivered certified.Can be delivered at short notice. Hours: 340 Own weight: 1 Model: K21-30 Byggekran. 340 timer!

Condition: used, Year of construction: 1999, Please contact ATS Norway for more information Please provide reference number upon request: 21130 Specifications: Year of manufacture: 1999 Capacity: 13 t/m Crane diagram Grab included Ihjdpfxsw Rah Ie Adwet New control console Very little use Description: Palfinger 13 t/m crane from 1999.Comes with grab. Equipped with a new control console and has seen very little use.Has been in storage for several years, so some refurbishment should be expected.Ready for delivery. Own weight: 111 Model: PK 13000

Condition: used, machine/vehicle number: ZCFA75B020248xxxx, mileage: 4,01,000 km, Year of construction: 2006, Please contact ATS Norway for more information Please provide reference number upon request: 20395 Specifications: Km: Approx. 401,000 Transmission: Manual Isdpfx Aowi Ryaedwoht Tires (see pictures) 4x2 Winch Length of plane: Approx. 4.8 m 150 hp Palfinger PK5200 crane from 1991 Crane diagram 3 seats Radio/CD Air conditioning/AC Service is done by owner Ready for delivery Description:Iveco 75E15 crane truck with winch.The truck is EU approved and from 2006.5.2 t/m Palfinger crane from 1991. Km: 401000 HK: 149 Technical approved: Yes EU-approved until: 11.02.2026 Own weight: 5530 Total Weight: 7490 Payload: 1885 Width: 245 Length: 798 Euro: 3 Gearbox: Manual

Condition: used, machine/vehicle number: XLRAE45GF0L41xxxx, mileage: 1,80,000 km, Year of construction: 2012, Please contact ATS Norway for more information Please provide reference number upon request: 21713 Specifications: Km: Approx. 180,000 Gearbox: Automatic Good tires On Spot Euro 5, 224 hp Platform length: Approx. 5 meters Width: Approx. 2.3 m 2 sets of wheels with tires Engine brake 4x2 Toolbox Fassi F105 crane Remote control Crane diagram Reach: 12 meters hydraulic Support legs Ihodpjxu Aw Eefx Adwst Rotating beacon Services performed at local workshop Video Ready for delivery Description:DAF crane truck from 2012.The truck is EU-approved and ready for delivery.Equipped with a Fassi F105 crane.Only 180,000 km. Km: 180000 HK: 224 Technical approved: Yes EU-approved until: 25.02.2026 Own weight: 6820 Total Weight: 12000 Payload: 5105 Width: 240 Length: 800 Euro: 5 Model: 2012 DAF Fa 45.220 Kranbil. Gearbox: Automatic