Used Air Cooled Water Chiller for sale (31,690)

Condition: new, ME-LINE - Air-Cooled Dehumidifiers are used for drying air of up to 100% relative humidity (RH) with temperatures from +45 ºC and above. EU-LINE - Air-Cooled Dehumidifiers are used for drying air of up to 100% relative humidity (RH) with temperatures from -30 ºC to +40 ºC. Itjdpfx Abskw Ukusced Rust is the adversary of freshly blasted steel; high air humidity combined with low steel temperatures creates ideal circumstances for moisture condensation onto the recently blasted surface. Condensation rust is a major cause of early coating failure. By lowering relative humidity, the Proton dehumidifiers are designed to give the best climatic conditions for blasting. Climate conditions across the world vary considerably from chilly and humid in Western Europe, warm and humid in the Far East, to hot and humid in the Middle East. Various types of technology can be employed in the dehumidification process; certain dehumidification technologies are more successful than others in dealing with specific climatic conditions. Each Proton dehumidifier is built to the highest quality standards and comes with regional certification. The heart of the humidifier is a very efficient and robust metal silicate rotor. The rotor contains a vast number of air channels, running parallel to the shaft, which ensures a large internal surface for adsorbing water vapour. The rotor is not affected by over saturation. Therefore, the PROTON dehumidifier’s rotor can resist long time storage at high humidity without loosing capacity. The PROTON dehumidifiers have been developed especially for corrossion protection in connection with sandblasting and painting operations to protect materials and to avoid moisture problems, meeting the following conditions: •Avaliable in sizes from 1.000m³/h to 18.000m³/h dry air. •Avaliable in pre-cooled and after-cooled versions for warm climates. •Robust design with steelframe, eyebolts etc. •Vital parts can easily be maintained and exchanged. •Large air inlet grills and filters. •Can be built into containers for protection. •Adjustable dehumidifying capacity and outlet air temperature in 4Grades. •Outdoor and indoor use. •Dry air pressure up to 1200 Pa. Technical. Spec.: Dehumidifiers differs between 1.000m3/h - 18.000m3/h.PROTON Dehumidifiers decrease the Relative Humidity (RH) from 90% to %10-15. Dehumidifiers are capable to remove 100lt water per hour.

Condition: used, Year of construction: 2015, functionality: limited functionality, machine/vehicle number: VLA 180S, cooling capacity: 190 kW (258.33 HP), type of input current: three-phase, type of cooling: water, overall weight: 1,850 kg, ambient temperature (max.): 35 °C, ambient temperature (min.): -15 °C, input voltage: 400 V, pressure: 2.5 bar, temperature: 7 °C, volume flow: 23 m³/h, pump pressure: 2.5 bar, total width: 2,240 mm, total length: 2,920 mm, total height: 2,510 mm, power: 190 kW (258.33 HP), input current: 296 A, Equipment: compressor, type plate available, Used chiller by VTRT International (York) Refrigerant: R410a 2 cooling circuits Iedpfx Absx Hwkmscstd 5 compressors Plate heat exchanger V-type condenser There are 3 units available. The frames show rusty spots (manufacturing defect), but the cooling system functions properly.

Condition: good (used), Year of construction: 2004, I sell the 3-axis CNC working centre Biesse Rover 24L with beam table, year 2004. Configuration: 3-axis main spindle HSD recently full reconditioned / Water cooled RS1600 Tool magazine 7 positions ISO30 on working head 1 grooving saw X-direction Drilling head 14+4+2 spindles Useful working area 4500x1330mm. 2 working fields, 4 clamping areas Automatic central system of lubrication. Total power 35kW XDNC 2.01 software controller with full instructions. Pump Becker 250/300 m3/h. 5,5KW. Additional vacuum outputs for raster works or connection of additional clamping devices. Isdpfxjh Txlcj Abcstd Good condition. Available immediately. Repair needed: Handles on beam table, rotation of the ISO30 magazine on working head

Condition: excellent (used), Year of construction: 2008, functionality: fully functional, Complete Ammonia Refrigeration Installation: Type: Reciprocating Compressor Refrigeration System V1 412 E and VF 612 E Year of manufacture: 2008 Cooling capacity: 760 kW Refrigerant: Ammonia NH3 / R717 Permissible operating pressure: low-pressure side -1/12 bar, high-pressure side -1/17 bar The cooling installation comprises: - 2 GEA Grasso reciprocating refrigeration compressors, consisting of: (1x) Grasso 612E package and (1x) Grasso 412E package - EM Polar pressure vessel, type: DM1600 - Kühlturm GmbH evaporative condenser, type: KIV 2/12-28-12, 2 - Switchgear and control cabinets (2 units) - 3 pallets with valves, plus additional spare parts Grasso 612E package: - 1 unit Grasso/GEA piston compressor, type 612E - Leroy Somer electric motor, 200 kW / 1468 RPM Ijdpoxg Ruisfx Abcstd - Dimensions: 3200 mm x 1900 mm x 2150 mm - Cooling capacity: 418.5 kW at -10°C / +40°C - Year of manufacture: 2008 Grasso 412E package: - 1 unit Grasso/GEA piston compressor, type 412E - Leroy Somer electric motor, 132 kW / 1468 RPM - Dimensions: 3200 mm x 1900 mm x 2150 mm - Cooling capacity: 325 kW at -10°C / +40°C - Year of manufacture: 2008 EM Polar pressure vessel: - 1 unit EM Polar pressure vessel, type DM1600 - Capacity: 9580 liters - Dimensions: 5200 mm x 1650 mm x 1900 mm - Empty weight: 2400 kg - Year of manufacture: 2008 Kühlturm GmbH evaporative condenser: - 1 unit evaporative condenser, type KIV 2/12-28-12, 2 - Dimensions (two parts): 6900 mm x 2500 mm x 2500 mm and 3200 mm x 2500 mm x 2150 mm - Cooling capacity: 1098 kW - Year of manufacture: 2008 Further information available on request.

Condition: excellent (used), functionality: fully functional, Chiller - Emerson Network Power chilled water unit Brand Emerson Network Power Cooling capacity 1300 kW Dimensions 13.5×2.50×2.40 m The device is characterized by high cooling capacity, which allows it to be used in demanding environments where reliable heat dissipation is necessary. Itjdpfxswplwge Abcjd

Condition: excellent (used), Year of construction: 2018, Power: 6.5 / 9.4 kW Itjdpsm Exdwjfx Abcsd Net weight: 365 kg Several of these units are available! Loading and/or shipping is possible!

Condition: new, Water bath/cooling trough for strand cooling during strand pelletizing. Made of stainless steel, suitable for various applications in plastics processing. Various lengths in stock, e.g., 3.5 m. With integrated strand guide rollers for safe and even cooling. Itedpfx Abewcdh Doced Robust design, ready for immediate use. We would be happy to send you further pictures and details if you are interested!

Condition: good (used), Amico Uniflair SDCC0200B hassas klima ünitesi 7,2 kW Model: SDCC0200B Soğutucu tipi su Fanlar: Havalandırma ileri yay ile. kürek Ters voltaj cihazı: 230V / 1ph / 50Hz ÇALIŞMA KOŞULLARI Kuru ampul sıcaklığı 24.0 ° C Islak hazne sıcaklığı 17.1 ° C rel. Nem% 50 Deniz seviyesinden yüksekliği. 0 m Hava geri dönüş basıncı 20 Pa Giriş sıcaklığı. Soğutma sıvısı 7,0 ° C Austrittstemp. d. Soğutucu 12.0 ° C Glikol içeriği% 0 Donma sıcaklığı 0.0 ° C Akış hızı d. Soğutucu 1237 l / s Akış hızı d. Soğutma sıvısı 0,34 l / sn HİZMETLER VE ÖZELLİKLER Toplam soğutma kapasitesi 7,2 kW Hassas soğutma kapasitesi 6,4 kW Soğutma kapasitesi Net Toplam 6.7 kW Net duyarlı soğutma kapasitesi 5,9 kW SHR 89.0% EER (soğutma kapasitesi / sistem güç tüketimi 13,9 kW / kW Hava besleme miktarı d. Klima (kuru) 1600 m³ / saat Hava besleme miktarı d. Klima (kuru) 0,44 m³ / s Hava sıcaklığı Dışarı üfle / cihaz çıkışı 12,9 ° C Bağıl besleme havası nemi (cihaz çıkışı)% 90 Fan sayısı 1 - Fan (lar) Hız kontrolü% 72 Oda ünitesinin 0,5 kW güç tüketimi Güç tüketimi fanları 2.8 A Maksimum dış basınç 144 Pa Basınç kaybı d. 16.6 kPa'ya kaydolun Basınç kaybı d. 3 yollu vanalar 9,6 kPa Ölü. Soğutucu tarafında basınç kaybı 26.1 kPa Serbest alan ölçümü ile 2 metre mesafedeki ses basıncı seviyesi 43,0 dB (A) (harici basınçta = 20Pa) Itedpfed Ip Efex Abced BOYUTLAR klima Yükseklik 1740 mm Genişlik 550 mm Derinlik 450 mm Resimler sadece örnek resimlerdir, orijinalleri kısa bir süre sonra takip edilecektir. Yapım Yılı 2004 ve 2006 Tedarik kapsamı: 1x Amico Uniflair SDCC0200B hassas klima ünitesi Ürün durumu: kullanılmış Daha fazla makale - yeni ve kullanılmış - dükkanımızda bulunabilir! Talep üzerine uluslararası nakliye ücreti!

Condition: excellent (used), Clint water chiller, which was cooling tooling for a Multivac thermoformer. Almost new condition. Itjdpfx Abjumay Ujcsd

Condition: good (used), Year of construction: 2010, Water chiller Itedpfx Absrc E Tmocod - Manufacturer: 7AIR - Type: SKG - 7,1 SPEZ - Coolant: R 134a

Condition: new, *TECHNICAL SPECIFICATION: Heating capacity: up to 36 kW per consumer circuit Cooling capacity: up to 30 kW per consumer circuit at -30°C Load circuits: 1 or 2 as standard Temperature range: - 45°C to +130°C Medium: water / glycol mixture Dimensions LxWxH (without connections) : 1-circuit: 1950 x 1280 x 1725 mm 2-circuit: 2150 x 1640 x 1725 mm Weight: 1-circuit: approx. 1300kg 2-circuit: approx. 1500kg *HIGHLIGHTS EQUIPMENT: -Controls: Temperature control (standard) -Control via SPS with touch screen -Analogue and digital interfaces -Internal 2-circuit pump system (INFO: Ensures performance values even at low flow rates) -Heating control via solid-state relay (SSR) -Flow measurement in the internal circuit for flow monitoring (INFO: If the water/glycol mixture is incorrect, the system automatically warns and switches off in the next step) -Pressure-controlled cooling water regulator (INFO: Much more accurate than temperature controls) Stainless steel tank, corrosion-resistant components (stainless steel/non-ferrous metal) (non-ferrous metal-free optional) All medium-carrying components and piping insulated for low-temperature application -Water-cooled condenser (air-cooled on request). *OPTIONS: -flow rate control: up to 100l/min, >4 l/min +/- 5% of measured value -Pressure control: 0.5 to 4.5 bar (control range) -compressed air monitoring -test piece emptying by means of compressed air - Cooling water monitoring -Limitation of inlet pressure Itjdpsg Ezarjfx Abced -Other special options available on request and after technical inspection Visit our website for more details or for other performance classes. *This unit conforms to the European Directives. Other directives and standards are only fulfilled if they are listed in the order confirmation. This technical specification reflects the standard equipment, customer requests deviating from the standard will be shown in quotations or order confirmations.

Condition: as good as new (ex-display), Year of construction: 2023, newly arrived air cooled chiller, 3,6KW at Eurovent, coaxial evaporator, 40l tank capacity, internal P3 pump, scroll compressor, machine is perfectly suitable for smaller chilled water supply of process applications. Compact design, simple control. Iedpfsfy Rycox Abcstd

Year of construction: 2022, condition: as good as new (ex-display), Air handler with EC technology for hall air conditioning or heating, cooling capacity in combination with a chiller unit: 150 kW at 7/12°C, heating capacity 300 kW, airflow 20,000 m³/h, 4x500 mm air outlets, compact design. Iodpfjfzrgyjx Abcjtd

Condition: like new (used), Year of construction: 2023, functionality: fully functional, cooling capacity: 3.6 kW (4.89 HP), air-cooled chiller in mint condition, only used for a short time, 3.6KW at Eurovent, coaxial evaporator, 40l tank capacity, internal P3 pump, scroll compressor, bypass, paddle switch and expansion vessel Machine is perfectly suited for smaller cold water supplies for process applications. Compact design, simple control. Itsdpfxsvf Dcze Abcjd

Condition: new, Year of construction: 2022, functionality: fully functional, machine/vehicle number: OCTME230 - 2200388958, type of input current: three-phase, cooling capacity: 66.2 kW (90.01 HP), overall weight: 383 kg, input voltage: 400 V, volume flow: 11.4 m³/h, warranty duration: 12 months, type of cooling: water, temperature: 7 °C, total height: 1,200 mm, total length: 1,735 mm, total width: 660 mm, pressure: 10 bar, Equipment: type plate available, Split-Type Chiller, Water-Cooled Chiller Unit Manufacturer: MTA S.p.A. Model: OCEAN Tech OCTME 230 – 66 kW The OCEAN Tech OCTME 230 is a water-cooled chiller unit for indoor installation in split version (without condenser), supplied without hydraulic kit (pump, buffer tank) but including crankcase heater and phase monitoring. Cooling capacity: 66.2 kW Chilled water temperature (outlet/inlet): 7 / 12°C Flow rate: 11.4 m³/h Condensing temperature: 45°C Refrigerant: R 410A Electrical Data: Voltage: 400 V, Frequency: 50 Hz, Phases: 3 Max. Power Consumption: 27 kW Max. Current: 45 A Starting Current (circuit): 178 A Protection class: IP22 Dimensions: Length: 1,735 mm, Width: 660 mm, Height: 1,200 mm Weight: 383 kg Chilled water connection: G 2" B Refrigerant connection Ø (mm): 22 / 28 ODF Serial no.: 2200388958 Iodjxxq U Topfx Abcstd Year of manufacture: 2022 Condition: Visual 1, Technically OK (storage unit, as new) Price: on request (Technical changes and prior sale reserved!)

Year of construction: 1991, condition: ready for operation (used), Dalex DR-F 2 Iedpfoftbtmjx Abcetd 0,35m/h³ 220 volts No. 109115732 year of manufacture 1991 Refrigerant R12--must be refilled--

Condition: new, functionality: fully functional, Staying cool, even when temperatures rise! With rising summer temperatures, reliable cooling in production facilities is becoming increasingly crucial. At ONI, we offer high-performance rental cooling systems, ideally suited for use in production environments. Whether as a replacement if your existing cooling system fails, to support insufficient cooling performance, or for general climate control—we have the right solution for your operations. Our portfolio includes: • Chillers from 10 to 10,000 kW cooling capacity • Various designs, including pump-tank units with regulation and control systems • Containerized cooling systems with all necessary fittings and control devices • Cooling towers, dry coolers, and pump-tank systems with complete regulation and control The benefits for your production: • Avoid production downtime with reliable machine cooling • Maximum efficiency with minimal energy consumption • No capital expenditure, as rental is flexible and tailored to your needs • Instantly operational for maintenance downtime, system malfunctions, or seasonal peaks Itjdpfx Aexbzafebcjd • Flexible connection options for almost any infrastructure • 24/7 hotline and service—even for third-party equipment Plan ahead—avoid unplanned outages We develop comprehensive cooling concepts before acute needs arise, so you are fully prepared for future challenges. Contact us for a no-obligation consultation—we’ll show you how to safeguard your process cooling while minimizing costs and risks.

Condition: new, New aircooling kit Pfeiffer PM Z01 300 AT€100,-/pc 15pcs available Itjdpfxed Sz Dzo Abced

Year of construction: 2011, operating hours: 6,967 h, condition: used, functionality: fully functional, 1 York, Johnson Controls, water chiller, model: YLAA0390HE, 390 kW (335,400 frigories), R-410 gas, 5 scroll compressors, tubular heat exchanger, Dimensions: 3690 x 2242 x 2393 mm high, Weight: 2805 kg, with 6 axial fans. Itsdpfxewg Hnne Abcjd Equipment tested and guaranteed in Spain.

Year of construction: 2008, operating hours: 13,000 h, condition: used, functionality: fully functional, (Take advantage of the occasion – price already reduced by 20%) Daikin water chiller, 368 kW (316,480 frigories) + heat pump, Model: EWYD360AJYNN, 2 semi-hermetic compressors, R-134A refrigerant, 8 axial fans, maximum consumption 132 kW. Dimensions: width 2254 x length 4783 x height 2336 mm, weight 4020 kg. Units tested, with warranty, shipping throughout Spain. Reference: 1113. We have 2 units in stock. Itedpfx Absxf Huieced

Year of construction: 2014, operating hours: 3,096 h, condition: excellent (used), functionality: fully functional, (Take advantage of the occasion: equipment already reduced by 20%) 1 Carrier water chiller, model: 30RB0202-B, cooling only, 193 kW (165,980 frig) power consumption 94 kW, refrigerant R410A, with shell-and-tube heat exchanger, 4 axial fans, 3 scroll compressors, weight 1,824 kg, dimensions: 2420x2240x2320 mm Compressor operating hours: 77, 83, and 3,096 respectively. Itsdpjxlua Hsfx Abcsd Equipment tested with full refrigerant charge, with warranty, shipping to all of Spain Reference: 1139

Condition: excellent (used), Year of construction: 2014, functionality: fully functional, cooling capacity: 131 kW (178.11 HP), type of cooling: air, aircooled Chiller MTA Cooling cap.131 KW (47 refr.tons), Itjdoyuvppjpfx Abced 2 circuits with each 2 scroll compressors, Direct expansion evaporator, with integrated pump and tank R 410a tested,ready for operation

Condition: excellent (used), Year of construction: 2014, functionality: fully functional, cooling capacity: 92.2 kW (125.36 HP), type of cooling: air, heating capacity: 101.6 kW (138.14 HP), aircooled Chiller GALETTI, Heat pump Itjdpoyuvhljfx Abced good condition Cooling cap. 92,2KW (27 refr.tons),Heating cap. 101,6KW( 30 refr.tons) 1 circuit with 2 scroll compressors, Plate evaporator R 410a tested,ready for operation

Condition: excellent (used), Year of construction: 2015, functionality: fully functional, cooling capacity: 291 kW (395.65 HP), type of cooling: air, heating capacity: 324 kW (440.52 HP), aircooled Chiller Daikin EWYD290BZ SL, Heatpump Iedpsyuvdgjfx Abcotd Cooling cap.291 KW (85 refr.tons),Heating cap. 324 KW(100 refr.tons) 2 circuits with 2 semihermetic screw compressors,inverter driven Shell+Tube evaporator, with integrated 1 pump R 134a tested,ready for operation

Condition: like new (used), Year of construction: 2024, functionality: fully functional, cooling capacity: 108 kW (146.84 HP), type of cooling: air, aircooled Chiller GALETTI very low hours Itjdpfeyutlbjx Abced Cooling cap. 108 KW (44,5 refr.tons), 2 circuits with each 1 scroll compressor, Plate evaporator R 454B tested,ready for operation