Used Alpine for sale (29)

Condition: good (used), Type: SVA100300/1 Screen area: 1,000 x 3,000 mm Sturdy semi-mobile steel construction with discharge chutes and discharge trough Gtsdpfot Sr Ihex Ah Het

Condition: ready for operation (used), functionality: fully functional, color: grey, Year of construction: 1988, Aeroplex Fluidized Bed Opposed Jet Mill 400 AFG The system is fully operational and can be inspected on site. Test grindings can be carried out in advance depending on the material. In 2005, the system was modernized, during which it was converted to load cells. Electrical control: Simatic S7-300. Gtsdpfxex T Ar Nj Ah Het

Year of construction: 2014, condition: used, Manufacturer: Hosokawa Hosokawa Alpine Model: Contraplex 160 C Year : 2014 Type : pin mill + associated equipment Documentation : Hosokawa Alpine Contraplex 160 C Fine impact mill with two driven pin discs Motor power (frame side) : 7,5 KW Pin speed (frame side) : 16 500 rpm Number of rows of spindles (frame side) : 3 Motor power (door side) : 5,5 KW Pin speed (door side) : 12 000 rpm Number of rows of spindles (door side) : 2   Gtsdpfxex R Avve Ah Hst Powder transfer Bohle MCL 300 container + stand Forced convection vacuum system Unloading hopper Handling trolley  

Condition: good (used), Technical data for pallet rack beam: Racking system: Voest Alpine Type: Megastar GS Included in delivery: 01x pallet rack beam, used Material finish: hot-dip galvanized CS profile: 100 x 50 x 10 mm Hook bracket: 4 HK (hooks) Clear span: approx. 2,700 mm 02x locking pins, used Design: completely galvanized For securing the cross beams Gjdpfx Ahjxb Dqgj Hstt Your contacts in our company: Mr. Andre Evering Mr. Mario Klöver Mr. Falk Deutsch General information about the item: This item is only offered for collection. If transport or shipment of this item is required, this will incur additional costs, which can be requested from us separately depending on the delivery location and scope of delivery.

Condition: good (used), Year of construction: 1985, greates pass round over bed 810 mm swing diameter over face slide 560 mm centre distance 00 mm bed width 480 mm slide valve travel 400 mm upper head travel 180 mm turning tool - shaft cross cut 32 x 25 mm power capacity 22 kW Gedsxn Ty Rspfx Ah Hjtt max. torque on the spindle 30 Nm spindle head Gr. 11, DIN 55027 spindle diameter in front bearing 152,4 mm spindle bore 106 mm turning speed range 9 - 1800 U/min turning speeds 24 longitudinal feeds: 0,092 - mm/U face feeds 0,046 - mm/U metric threading 0,5-112 mm inch threading 1/4 - 56 G/1" thread - module mm thread - DP 1 - 224 Pitch tailstock quill diameter 115 mm quill stroke 225 mm taper of tail spindle MK 6 max. workpiece weight between centres 00 kg max. workpiece weight -without tailstock 750 kg 3-jaw chuck Röhm, Ø Overall size ca. 4600x1900x1600 mm weight ca. 4300 kg

Condition: used, No. 10025 Cutting mill Alpine RO 40/63 Used Gtjdpfjxph Avjx Ah Hjt According to our customer, the machine is fully functional and can be inspected on site Motor power 30 kW Rotor diameter 630 mm Rotor width 400 mm Rotor knives 5 rows with 3 knives each Stator knives 1 row with 3 knives to the front and 2 rows with 3 knives to the rear Maximum permissible speed of the drive shafts 560 rpm The cutting mill Alpine RO 40/63 with patented cross-shear rotor guarantees optimum material distribution with maximum cutting performance. The hinged screen holder allows easy removal of the screen and perfect access for cleaning the machine and replacing the blades. Ideal for industries such as recycling (for blown film, cables, plastics, etc.) and food (tea, spices, dried vegetables, etc.). Sale on behalf of customer, ex location near 72072 Tübingen, without dismantling, transport and assembly Subject to errors in the description and price Dismantling, transport and loading by us optionally possible To avoid possible misunderstandings, an on-site inspection is possible and recommended by appointment Sold as is Technical details, condition description, year of construction and scope of delivery according to manufacturer's brochure or previous owner, without guarantee Subject to prior sale For used machines, any warranty is excluded, the following applies: “sold as seen” Pictures and videos serve as examples and do not represent the actual scope of delivery Terms of payment: Prices excl. VAT, payment before collection or dispatch Terms of delivery: ex location

Condition: used, functionality: fully functional, Sturdy feed hopper Working area: 800 x 2,200 mm Gjdeu Dhncspfx Ah Hett Electric motor, gearbox, eccentric reduction gear on a sturdy base frame

Condition: used, Year of construction: 1990, functionality: fully functional, turning diameter over cross slide: 570 mm, turning diameter over bed slide: 340 mm, spindle speed (max.): 2,500 rpm, The machine operates fully. The machine bed is in excellent condition. Runs very quietly. Gtsdjw E D Rqepfx Ah Hjt

Condition: refurbished (used), Year of construction: 1981, functionality: fully functional, turning diameter over cross slide: 280 mm, spindle bore: 52 mm, turning diameter: 420 mm, center height: 210 mm, turning length: 1,000 mm, total length: 2,300 mm, total width: 1,300 mm, total height: 1,700 mm, spindle speed (max.): 1,500 rpm, spindle speed (min.): 33 rpm, quill mount: MK 4, Machine Equipment / Highlights Gtedsxqpwkepfx Ah Hjt Heidenhain ND 780 digital position display Röhm 3-jaw chuck, Ø 250 mm Multifix quick-change tool holder Coolant system for efficient machining Chuck guard for increased safety Chip guard rear wall for a clean working environment Year of manufacture: 1981

Condition: good (used), VOEST DA 360 – Lead and Feed Screw Lathe Gtodpfx Ahex Auldj Het -Heidenhain digital readout -Center height over bed: 400 mm -Swing diameter over bed: 800 mm -Swing diameter over cross slide: 500 mm -Turning length: 1,000 mm -Spindle bore approx. 87 mm -Speed range: 14 – 1,000 rpm / 18 speeds -Automatic longitudinal and cross feeds -Automatic Z-axis infeed -Tailstock Morse taper 5 -3-jaw wedge-type chuck 250 mm -Multifix base holder with insert -Work lamp -Machine feet -Documentation Dimensions: LxWxH 3x1.5x1.7 meters / Weight 3,500 kg Subject to errors or input mistakes.

Condition: used, Year of construction: 1982, centre distance 3000 mm center height over slide 250 mm center height over bed 400 mm Gtodpfxoucgyxo Ah Hst clamping diameter 450 mm turning speeds 7-2240 U/min feeds - fine adjustment 0,015 mm/min face 0,015 m/min output 33 kw

Condition: used, machine/vehicle number: 11796, Rotor diameter: 250 mm Rotor width: Rotor blade: 3 Stator knife: 4 Inlet cross-section approx. 250 x140 Drive motor: 5.5 kW Gtodpewbwunsfx Ah Hjt

Condition: good (used), Year of construction: 1989, Vertical crushing plant Voest Alpine ZS 100 Basic year of construction 1989 (machine/rotor completely overhauled) Machine number 89 914 04 incl. drive motor 145 KW Godpfx Ahju U Ukij Hstt

Condition: repair required (used), Mill for recycling waste and plastics. Manufacturer: ALPINE AUGSBURG Type: RO 63/50 Motor power: 50 kW Feed hopper dimensions: 400 x 500 mm Gtodpfx Aow E Nw Noh Het Included: 16 interchangeable screens with mesh sizes from 1 to 50 mm Machine dimensions: 3000 x 2000 mm Height with conveyor: 4200 mm Weight: 7000 kg Technical condition: used machine, no electrical installation.

Condition: used, A used well preserved guillotine shear Vöest Alpine cutting length: 2010 mm cutting capacity in steel up to 370N/mm² tensile strength: 5 mm strokes per minute: 50 H/min Hold down pressure: 30 bar Gtjdpfx Ahepgmpde Hjt number of hold-downs: 8 pcs. backgauge manually adjustable: 950 mm throat depth: 150mm dimensions: LxWxH 280x190x140cm weight: 2500 kg

Year of construction: 1988, condition: used, Voest Alpine DA 160 lathe year 1988 with three-jaw chuck , Multifix. , Ready for demonstration under power by arrangement. Gtodpjma Snxofx Ah Hst

Year of construction: 2006, operating hours: 8,830 h, condition: good (used), functionality: fully functional, machine/vehicle number: R1153413, Alpine mill including complete plant for sale Cutting mill: Rotor diameter: 600 mm Rotor width: 1000 mm 6-knife rotor Year of manufacture: 2006 Included: Material feed belt (designed for automotive bumpers), mill, conveyor line for packaging into octabins or big bags, dedusting system. Condition: Very well maintained, regularly and promptly serviced Gsdpfxsxd Aiaj Ah Hott Inspection: In operation until recently, currently still powered and available for on-site inspection at any time Ready for operation: Immediately available and fully functional The machine is in very good condition and is ready for immediate use.

Condition: used, machine/vehicle number: 11795, Rotor diameter: 250 mm Gsdpfx Aowbwvxjh Hett Rotor width: Rotor blade: 3 Stator knife: 4 Inlet cross-section approx. 250 x140 Drive motor: 5.5 kW

Condition: good (used), Vöest-Alpine Jaw Crusher . Type: STE 4025 K . Mach. No.: 70310010 . 400 x 250 mm. . With Electrical motor. Gedpemnq Dqjfx Ah Hott

Year of construction: 2000, condition: ready for operation (used), A complete Hosokawa mill for processing polyester resin lumps is available. Complete plant: Feed material: polyester resin, max. feed grain size (dry): 800mm/600mm/20mm-30mm, fineness: below 1.5mm, round hole diameter: 15mm, plant capacity: approx. 3000kg/h, analysis method: Alpine air jet screen 200 LS-N. 1) Alpine single-shaft shredder type A 1500P, feed hopper opening: 2030mm/1440mm, feed hopper volume: 2.5m³, working width: 1500mm, knife circle: 300mm, rotor speed: 100rpm, motor power: 37kW, machine dimensions X/Y/Z: approx. 2100mm/2200mm/2300mm, weight: approx. 3500kg. 2) Automatic dedusting filter AE 48 L, filter surface: 42m², filter bags: Needle felt 550g/m². 3) Alpine Compact-Line granulator 45/100 CL, cutting tool rows: 4, min. hole width: 3mm, required power: 55kW. Including extraction system, conveyor system and accessories/peripheral equipment. Documentation available. On-site inspection is possible. Gtsdovdu N Aspfx Ah Het

Condition: used, machine/vehicle number: 10875, 3-blade rotor 2 rows of stator blades Rotor diameter: 280 mm Godpfoghgfzex Ah Hett Rotor width: 600 mm Inlet cross-section: approx. 280 x 600 mm Weight: approx. 800 kg

Condition: ready for operation (used), A complete UPG system for polyester resin granulate production is available. 1) High-speed Henschel fluid mixer FM 350C, speed: 1500 rpm, heating unit: Lauda. 2) Raw material supply system with 6 bunkers, screws and vibrating chutes. 3) Conveying system with a collecting tank located 9m above the mixer and a Demag 4t rope hoist. 4) Schenk fluidized bed cooler. 5) Engelsmann ED 250/4 flat bed screen. 6) Alpine B40/63 RO granulator. 7) 2 annular gap compactors Siemens. 8) 2 Kessler & Luch blowers, volume flow: 7000m³/h. 9) Aerobic filter, filter capacity: 4000m³/h. Documentation available. On-site inspection is possible. Gsdpfx Aswk Nk Tsh Hjtt

Condition: used, machine/vehicle number: 11647, Rotor blade row: 3 Gsdpfeghgqzsx Ah Hstt Stator blade row: 2 Rotor width: 280 mm Rotor diameter: 280 mm Inlet dimensions: 300 x 300 mm

Year of construction: 1983, condition: ready for operation (used), Center height: 180mm, center width: 800mm, turning diameter over bed/face slide: 380mm/200mm, spindle bore: 52mm, speed: 1500rpm, bed width: 330mm, quill stroke: 180mm, quill holder: MK4, machine dimensions X/Y/Z: approx. 2000mm/850mm/1450mm, weight: approx. 1050kg. On-site inspection is possible. Gsdpfsv Amp Sex Ah Hett

Condition: used, machine/vehicle number: 11634, Rotor diameter: 600 mm Rotor width: 1000 mm 6-knife rotor - cross shear cutting rotor Gsdpfx Asghgqdsh Hott 2 stator knife rows Inlet cross section approx. 650 x 100 mm Drive motor 75 kW Machine features: The cross-shear cutting rotor ensures optimum material intake as well as distribution and thus high outputs with reduced energy consumption. Electro-hydraulic opening of the mill top and the screen basket. The sieve insert can be rotated 180° and reused after one-sided wear. Adjustment of the rotor knives outside the mill by means of an adjustment device reduces downtimes.