Used Amada Fo 3015 for sale (221)

Condition: ready for operation (used), Year of construction: 1998, operating hours: 80,162 h, pressing force: 51 t, stroke length: 200 mm, controller manufacturer: AMADA, controller model: Operateur, number of axes: 8, This 8-axis AMADA HFBO 5020 press brake was manufactured in 1998. It features a bending length of 2090 mm and a press capacity of 500 kN. The machine includes a stroke of approximately 200 mm and an open height of around 480 mm. If you are looking to get high-quality bending capabilities, consider the AMADA HFBO 5020 press brake we have for sale. Contact us for further details. • Stroke: approx. 200 mm Iijdey Alvpspfx An Doa • CNC control: OP-2 CNC • Controlled axes: 8 (Y1, Y2, X1, X2, R1, R2, Z1, Z2) • Open height: approx. 480 mm • Throat depth (frame throat/gap): approx. 400 mm • Distance between uprights: approx. 1,665–1,690 mm • Table width (bottom beam width): 60 mm • Working height (table height from floor): 910 mm • Max. hydraulic pressure: 270 bar • Number of cycles: 4 cycles/min (at nominal conditions) • Main motor power: 4.5 kW Technical Specification Bending Length 2090 mm

Condition: excellent (used), functionality: fully functional, Sheet width: 2,500 mm Sheet thickness: 4 mm Machine weight approx.: 5,000 kg Space requirement approx.: 3,000 x 2,000 x 1,700 mm Accessories/equipment: - Sheet holding device - Angle stop - 3x support arms - Foot switch Iiodpfxsyz Rv Ee An Dsa - Light barrier

Condition: used, sheet width 2500 mm plate thickness 4 mm Iedpsyz Ddpsfx An Doia weight of the machine ca. 5.000 kg dimensions of the machine ca. 3000 x 2000 x 1700 mm

Year of construction: 2013, condition: ready for operation (used), travel distance X-axis: 550 mm, overall weight: 11,000 kg, total height: 2,500 mm, table load: 1,200 kg, number of axes: 2, This AMADA MEISTER G3 surface grinding machine was manufactured in 2013 and is a robust solution for precision surface grinding applications. Iiedpfxeyz Scge An Dja The machine is currently not in working condition due to an electronic/control issue. The FANUC controller was replaced; however, the machine did not return to operation after the replacement. A repair was proposed by the manufacturer’s service at an estimated cost of €15,000–€20,000, which was not carried out. As a result, the machine has been out of service and switched off for several years. Please contact us for further information. Machine Benefits Technical Machine Benefits • Suitable for heavy-duty operations. Extra Information The machine is currently not under power Dimensions Machine Depth 6400 mm

Condition: used, Year of construction: 2001, pressure 70 -800 kN chamfer lenght 2505 mm distance between columns 2125 mm Control OP 2000 controlled axis 7 throat 420 mm stroke 200 mm dayligth 470 mm table width 60 mm table height 960 mm Iijdoyz Dgwopfx An Dsa ajustment speed 100 mm/sec working feed 10 mm/sec return speed 100 mm/sec weight of the machine ca. 6,3 t Patented Amada technology ensures absolutely correct bending results without bombing device

Condition: good (used), functionality: fully functional, total length: 4,000 mm, total width: 2,000 mm, total height: 2,800 mm, overall weight: 7,500 kg, FOR SALE: Amada HFB 125/30 Press Brake Available for purchase: a true industry workhorse, the Amada HFB 125/30. Known for its exceptional precision and reliability, this machine has been well-maintained and is ready for demanding production environments. Technical Specifications: Press Capacity: 125 tons Bending Length: 3000 mm Year of Manufacture: approx. 2001 Controller: Operateur CNC (multi-axis control) Stroke Length: 200 mm Open Height: 450 mm Key Features: Precise and efficient down-stroking operation. Versatile multi-axis backgauge for complex setups. Rigid frame design ensuring consistent angles across the full length. Iijdpfx Asy Athyjn Dsa Well-maintained and in full working order.

Condition: good (used), Year of construction: 2012, functionality: fully functional, Hydraulic Press Brake Manufacturer: AMADA Model: HFE M2 8025 Year: 2012 Technical Details Manufacturer: AMADA Model: HFE M2 8025, 4 AXES Year of manufacture: 2012 Pressing force: 80 t Bending length: 2,570 mm Stroke: 200 mm Iedpfx Anjyyykce Djia Distance between uprights: 2,125 mm Installation height: 470 mm Throat depth: 420 mm Table width: 60 mm Table height: 960 mm Approach speed: 1 – 100 mm/s Working speed: 1 – 10 mm/s Return speed: 1 – 100 mm/s Motor power: 9 kW Oil capacity: 90 L Max. pressure: 300 bar Dimensions: approx. L 3.70 x W 1.75 x H 2.55 m + 2x tool cabinets Weight: approx. 6.4 t + 2x tool cabinets with tools Features • Controlled axes: Y1, Y2, X, R • AB-PAD numerical control with touchscreen • Fissler safety laser light barrier at the front • Sheet supports at the front • 2 x tool cabinets • Large package of tools as shown in the photos • Service manuals • Documentation All information provided without guarantee. A powered demonstration at our showroom is possible at any time.

Condition: excellent (used), Year of construction: 2019, operating hours: 4,135 h, overall weight: 3,500 kg, table height: 740 mm, coolant pump power: 1,500 W, saw band length: 5,300 mm, saw drive: 5,500 W, Saw from the year of production 2019 / post-show saw - first launch in 2021. Isdpfsuiu Sijx An Doia Saw in very good technical and visual condition. Technical parameters in the photo above. Price without rollover.

Condition: excellent (used), Year of construction: 2016, functionality: fully functional, We are selling a beautiful high-precision surface grinding machine from AMADA. The machine has low operating hours and is available for demonstration under power at the seller’s location. The machine’s enclosure has been completely renewed and it is in very well-maintained condition. Technical Data: Clamping surface: 550 x 200 mm Travel paths: 600 x 250 mm Height to spindle center: 90 to 400 mm Standard magnetic chuck size: 400 x 200 x 100 mm Grinding wheel size: 225 x 25 x 31.75 mm Grinding wheel speed: 500 – 5000 rpm Year of manufacture: Nov. 2016 Iedpjyx A Nfofx An Dsia Installation dimensions and weight: 2700 x 2400 x 1900 mm // Weight: 2400 kg Machine equipment: - FANUC Series 32i-Model B control - Machine enclosure (new) - Flanges - Dressing spindles (profile and groove grinding) - Belt filter - Integrated probe - Linear drive - Automatic balancing MPM - Ball screws and linear drive

Condition: ready for operation (used), Year of construction: 1995, functionality: fully functional, input voltage: 380 V, input frequency: 50 Hz, stroke length: 100 mm, throat depth: 400 mm, oil tank capacity: 50 l, total length: 2,700 mm, total width: 1,700 mm, total height: 2,200 mm, overall weight: 3,500 kg, travel distance X-axis: 600 mm, controller manufacturer: TASK, controller model: MASTER 3AX, working width: 2,000 mm, bending force (max.): 35 t, back gauge: 600 mm, distance between stands: 1,800 mm, control type: CNC control, degree of automation: automatic, actuation type: hydraulic, Equipment: lower tooling, upper tooling, Schiavi Amada GH630A guillotine shear, 3100 mm blade, 6 mm cutting capacity. Fully operational and equipped with PRG910 backgauge with a stop up to 1000 mm. Ijdpeygu Uhefx An Doia

Condition: ready for operation (used), Year of construction: 1999, pressure 80.0 t chamfer lenght 2570 mm distance between columns 2125 mm column arm 420 mm table width 60.0 mm ajustment speed 100 mm/sec working feed 10.0 mm/sec return speed 100 mm/sec stroke 200 mm dayligth 470 mm table height 960 mm Number of working hours ~ 33.100 h oil volume 90.0 l total power requirement 9.0 KW weight of the machine ca. 5750 kg. range L-W-H 3630 x 2450 x 2550 mm - in checked conditions - machinevideo - ?v=SskqZJdQxsQ Equipment: - AMADA CNC control, model OPERATEUR II * Manual control for fine adjustment of the axes - CNC control OPERATEUR 2 in 8 axes (X1 X2,Y1 Y2,R1 R2,Z1 Z2) - CNC-controlled backgauge adjustment (X1 X2) - CNC-controlled vertical adjustment of the fence fingers (R1 R2) - CNC-controlled adjustment of the stop fingers left-right (Z1 Z2) - Swivel operation, front left - 1x freely movable foot switch - Top tool holder with top wedge crowning (AMADA system) - Rear safety guard (safety grid) - Side safety guard (safety doors) - CE marking - Original operating instructions * Further technical data : Iijdpeyyc Dfjfx An Doa Adjustment range : X axis ... 700 mm X axis with workpiece in place ... 1020 mm R axis .. 250 mm Adjustment speed : X axis .. 500 mm/sec R axis ... 160 mm/sec Z1 Z2 axis .. 1000 mm/sec Positioning accuracy ± in mm : X axis .. 0.1 R axis .. 0.1 Z axis .. 1.0

Condition: like new (used), Year of construction: 2016, Manufacturer: AMADA Model: HFE M2 2204 8-axis press brake Year of manufacture: 2016 Serial number: HFE-M2-220.4 LK101025 Number of axes: 7 (8-axis configuration) Pressing force: 2,200 kN Length: 4,000 mm Safety system: AKAS III P (laser) Iedex Trw Ijpfx An Deia Bending angle measurement: digital angle sensor Stroke: long stroke (extended) Connected load: 20 kW Operating hours: 10,238 h Dimensions and weight: Weight: 17,970 kg Dimensions (W x H x D): approx. 550 x 300 x 200 cm Additional equipment: 1 tool holder (stainless steel) 2 tables with equipment

Condition: ready for operation (used), Year of construction: 1991, Immediately available ex works: CNC press brake Amada Promecan Model HFBO 125/40 Ijdpoy Alq Tsfx An Deia Year of manufacture: 1991 Control system renewed in 2024 Delem DA 58 control Pressing force: 125 t Working length: 4200 mm Frame gap: 2700 mm Throat depth: 410 mm Stroke: 180 mm Drive: 11 kW Working speed: 8 mm/s Weight: 10 t Many tools included Price: EUR 10,500— plus VAT, ex works

Condition: used, Year of construction: 1998, pressure 100 t chamfer lenght 3100 mm distance between columns 2750 mm Stroke beam 200 mm max. opening beam/table 470 mm C-recess 350 mm traveldistance X1+X2 cnc programmable 600 mm R1 and R2 axis controlled by cnc 150 mm Z1+Z2 axes controlled by cnc 0-2500 mm Ijdpoyw Tl Uofx An Djia Quick speed,inspeed 100 mm/sec opening speed 0-10 mm/sec Number of working hours 8500 h length 3600 mm width 1900 mm height 2600 mm weight 6750 kg total power requirement 9 kW dimensions of the machine ca. 4x2x3 m All machines can be viewed under power at all times. Demonstrations of the machines possible at any time.

Condition: used, Year of construction: 1999, pressure 100 t chamfer lenght 3100 mm distance between columns 2750 mm Stroke beam 180 mm max. opening beam/table 470 mm C-recess 350 mm traveldistance X1+X2 cnc programmable 600 mm R1 and R2 axis controlled by cnc 120 mm Iiedpfx Anoyw Tl Io Dea Z1+Z2 axes controlled by cnc 300-2700 mm Quick speed,inspeed 100 mm/sec bendingspeed 0-10 mm/sec opening speed 100 mm/sec Number of working hours 29000 h length 3500 mm width 1950 mm height 2550 mm weight 6700 kg total power requirement 8 kW dimensions of the machine ca. 4x2x2,5 m Control CNC All machines can be viewed under power at all times. Demonstrations of the machines possible at any time.

Condition: like new (used), Year of construction: 2014, functionality: fully functional, stroke length: 200 mm, controller manufacturer: Amada, controller model: Amada AB-Pad, number of axes: 4, Equipment: documentation/manual, Model: Amada HFE M2 100t 3m, 4-axis press brake Year of manufacture: 2014 Available immediately Press force (kN): 1000 Beam length (mm): 3110 Frame gap (mm): 2705 Throat depth (mm): 420 Standard stroke (mm): 200 Standard open height (mm): 470 Beam width (mm): 60 Table height (mm): 960 Approach speed (mm/s): 1-100 Bending speed (mm/s): 1-10 Return speed (mm/s): 1-100 Number of controlled axes: 4 Length (mm): 4580 Depth (mm): 2450 Height (mm): 2685 Weight (kg): 6900 Iiedpfx Asynbfvon Doa Safety device: AKAS type, additional pair of back gauge fingers Support arm for hanging, height adjustable with 2 lateral stops Hanging element for support arm and table, suitable for HFE-M2 series

Condition: new, Saw band dimensions: 4570 x 34 x 1.1 mm Iiodpfslkdqrox An Dsa Tooth pitch: 3/4

Condition: ready for operation (used), Year of construction: 2012, machine/vehicle number: 230, functionality: fully functional, power: 20 kW (27.19 HP), input voltage: 380 V, input frequency: 50 Hz, type of input current: three-phase, table width: 3,100 mm, table length: 10 mm, year of last overhaul: 2025, Amada hydraulic shear, 3100 mm cutting width, in very good condition, 20 hp, weight 7 t, stroke 190 mm. Iedjy Ahpfopfx An Doia

Condition: excellent (used), Technical Data: Working length: 3100 mm Distance between uprights: 2560 mm Pressing force: 220 t CNC control: OPERATOR II grafic Controlled axes: Y1/Y2; X1/X2; R1/R2; Z1/Z2 Bending simulation automatic crowning motorized adjustable backgauge Iodpfx Anjyzm Nhs Doia Throat depth: 650 mm Stroke: 200 mm Working height: 960 mm Laser safety system: FIESSLER Motor power: 17 kW CE marking Dimensions (LxWxH): approx. 3700 x 2400 x 2900 mm Weight: approx. 15 tons Accessories: 1 set of tooling: 1 upper tool 120 mm 1 lower tool, segmented die: V 50, 35, 22, 16 Condition: Very good condition, complete overhaul in 2026 The seller is not liable for typing or data transmission errors. The machine's appearance, technology, and wear are age-appropriate; used machines are sold without any warranty.

Year of construction: 2011, condition: ready for operation (used), General Data Machine weight 4700 kg Control Unit Brand AMADA Main Drive Iedpfox D H I Hsx An Deia Pressing force 500 kN Stroke 200 mm Number of axis 8 This 8-axis AMADA HFE M2 5020 was manufactured in 2011. It features a hydraulic press brake with a maximum press force of 500 kN and a stroke up to 200 mm. Weighing 4,700 kg and operating at a noise level of 74 dB(A), it's CE certified and made in France. If you are looking to get high quality bending capabilities consider the AMADA HFE M2 5020 machine we have for sale. Contact us for more information. Application Types Bending

Condition: like new (used), Year of construction: 2004, AMADA MODEL HFT 8025 80 tons capacity x 2500 bending length hydraulic downstroking press brake complete with CD 2000 4 AXIS colour graphic cnc control, ERWIN SICK machine mounted electronic guards , side and rear interlocked fencing Model Amada HFT 8025 downstoke CNC Press brake Year 2004 Tonnage 100 KN Type CD 2000 CNC Controlled Axis Y1, Y2, X, R Max. Bend Length 2500 mm Open height 470 mm Stroke Length 350 mm Approach Speed 100 mm/sec Bending Speed 1 - 10 mm/sec Return Speed 1-100 mm/sec Oil Capacity Motor Power 7.5kw Weight 6100 kg Bed Length 2500 mm Bed Width 60 mm Open Height 470 mm Throat Depth 420 mm CNC Control Iiodpfx Aneu A Dgre Dea Backguage Stoke (X axis) 700 mm/s Max gauge 1000mm R axis 250mm can be demonstrated under power BROCHURE AND FURTHER INFORATION AVAILABLE UPON REQUEST

Condition: used, stroke length: 30 mm, overall weight: 10,500 kg, bending force (max.): 170 t, control type: CNC control, degree of automation: automatic, AMADA Promecam HFB Press Brake — 1700 kN / 3000 mm For sale: Heavy-duty hydraulic press brake for industrial use, in very good working condition. Machine details: Iedpfx Aeywr R Ajn Dsia Manufacturer: Amada Promecam (France) Model: HFB Year of manufacture: 1991 Technical specifications: Press force: 1700 kN (170 tons) Maximum stroke: 130 mm Input voltage: 380 V / 50 Hz, 3-phase Installed power: 13 kW Nominal current: 27 A Weight: 10,500 kg Control system: Delem DA 58 graphical CNC controller Additional information: The machine is equipped with a full air bending capacity chart mounted directly on the machine body. Tooling included. This press brake has been in regular production use and is in full working order. For further information and inquiries, please contact us by email or phone. Available for collection by arrangement.

Condition: ready for operation (used), functionality: fully functional, Year of construction: 1996, control type: CNC control, degree of automation: automatic, actuation type: hydraulic, controller manufacturer: TASK, controller model: MASTER 3 AX, working width: 2,500 mm, input voltage: 380 V, input frequency: 50 Hz, type of input current: three-phase, control voltage: 380 V, oil tank capacity: 70 l, overall weight: 5,000 kg, total length: 2,800 mm, total width: 1,800 mm, total height: 2,200 mm, year of last overhaul: 2026, Equipment: CE marking, documentation/manual, finger protection, type plate available, Press brake SCHIAVI - AMADA RG 50-25 Press force 50 tons Table length 2550 mm Iiodpfx Anjygu Ale Dja MASTER TASK 3-axis CNC control Complete with upper and lower dies Fully functional and connected for tests and video

Condition: excellent (used), Year of construction: 2013, Model Amada HFE MK2 80 x 2500 , 8 axis Press Brake Year 2013 Tonnage 80 tonnes Isdpfxey Amd Uo An Djia Max. Bend Length 2500 mm Stroke Length 200 mm Approach Speed 1 - 100 mm/sec Bending Speed 1 - 10 mm/sec Return Speed 1 - 100 mm/sec Oil Capacity 110L Motor Power 9kw Weight 5600 Kg guarding Erwin Sick machine mounted light screen guards, side and rear interlocked fencing Dimensions Machine Length 3950 mm Machine Depth 2580 mm Machine Height 2540 mm Distance Between Side Frames 2125mm Beam width 60 mm Table height 960 mm Open Height 470 mm Throat Depth 420 mm

Condition: used, Year of construction: 2013, Type: Circular saw Manufacturer: Amada Model: CMB 75 CNC Iisdsyn Hc Hspfx An Doa Year of manufacture: 2013 Condition: Used Quantity: 1