Used Amada Em 2510 Nt for sale (219)

Condition: ready for operation (used), Year of construction: 2005, operating hours: 17,200 h, functionality: fully functional, type of input current: three-phase, sheet thickness (max.): 3 mm, sheet thickness steel (max.): 3 mm, cutting range flat at 90° (X-axis): 2,500 mm, cutting range flat at 90° (Y-axis): 1,270 mm, AMADA EM2510NT CE (2005) | 20t CNC Turret Punch Press | NT Semi-Automatic | PLN 180,000 net For sale: AMADA EM2510NT CE CNC turret punch press from 2005. The machine is fully operational, currently in continuous use, and can be powered on and tested on site. CE version. ⚠️ Sale includes the machine only – WITHOUT TOOLS ✅ Key information: • Manufacturer / Model: AMADA EM2510NT CE • Year of Manufacture: 2005 • Type: CNC turret punch press • Punching force: 20 tons / 200 kN • Operating hours: 17,200 h • Condition: fully functional, ready for operation • Last inspection: November 2025 • No faults/alarms on the controller • Machine testing available on site _____ ✅ Technical specifications: • Working area: 2500 × 1270 mm Isdpfsyapzcsx Adwjtb • Sheet re-positioning: up to 5000 × 1270 mm • Max. sheet thickness (mild steel): 3.2 mm • Control: AMADA • Tool turret _____ ✅ Automation (NT) Machine equipped with NT system – semi-automatic: • streamlines sheet feeding/positioning • increases production efficiency ⚠️ Note: This is a semi-automatic system (not full automatic loading/unloading). _____ ✅ Scope of supply: ✔ AMADA EM2510NT CE punch press ✔ complete, operational machine with fixed auxiliary equipment ✔ documentation/manuals NO TOOLING (tooling is not included in the sale) _____ ✅ Application Ideally suited for: • sheet metal component production • perforation and technological hole punching • enclosures, covers, panels, control cabinets • parts for welding and bending _____

Condition: used, functionality: fully functional, Year of construction: 2004, operating hours: 26,426 h, control type: CNC control, degree of automation: automatic, actuation type: hydraulic, punching force: 20 t, The punching machine is in good condition and has always been serviced on time by certified Amada service representatives. All documentation is included. The drum encoder was recently replaced. The machine is sold complete with software and tools. The punching machine is connected and can be tested on site. Specification: Year: 2004.07 Made in: France Operating hours: 26,426 Power-on hours: 65,006 Control unit: AMADA AMNC-F Punching force: 20 tons Stations: 45 Tools: sold with tooling Software: Linea 5 / Combi 5 (Only works with Windows XP) Sheet length: 2,500 mm Sheet width: 1,270 mm Sheet thickness: 3.2 mm Sheet repositioning: 5,000 mm Workpiece weight: 150 kg Dimensions: L 6080 x W 5120 x H 2318 mm Weight: 16,500 kg Location: Lithuania Test possible: Yes Itjdpfx Aew E Emaodwob If you have further questions, we will be happy to answer them.

Condition: ready for operation (used), Year of construction: 2010, operating hours: 23,941 h, controller manufacturer: FANUC, controller model: n/a, overall weight: 21,000 kg, number of axes: 3, This 4-axis AMADA EMZ 3510 NT was manufactured in 2010. It features a punching capacity of 300 kN and includes 45 turret stations. With a power requirement of 27 kVA and a weight of 21000 kg, this CNC punch press is robust and efficient. If you are looking to get high-quality punching capabilities, consider the AMADA EMZ 3510 NT machine we have for sale. Contact us for more information about this machine. Additional equipment • Power Required: 27 kVA • Noise Level: 91 dB (A) Machine Benefits Technical Machine Benefits • Stopping distance: 360 mm Isdpfx Adox Hlh Hjwotb • Capacity: 300 kn Extra Information Machine still under power

Condition: ready for operation (used), Year of construction: 2009, operating hours: 22,574 h, punching force: 20 t, total height: 2,082 mm, travel distance X-axis: 2,500 mm, travel distance Y-axis: 1,270 mm, overall weight: 13,000 kg, controller manufacturer: AMADA, controller model: AMNC-F, product length (max.): 4,165 mm, General Data Machine weight 13000 kg Measurements height 2082 mm Control Unit Brand AMADA Model AMNC-F Iodpfox E Ecusx Adwotb Main Drive Punching force 200 Kn Dimensions Machine Length 4165 mm Movement X-Axis Movement 2500 mm Y-Axis Movement 1270 mm This AMADA AC2510 NT + MP 250 was manufactured in 2009. It features a 51-station turret and can handle sheet sizes up to 1270 × 5000 mm, with a maximum thickness of 3.2 mm for mild steel. The machine includes a loading system MP 250, enhancing its efficiency. Consider the opportunity to buy this AMADA AC2510 NT + MP 250 CNC punching machine. Contact us for more information. Application Types Punching

Year of construction: 2008, operating hours: 24,490 h, condition: ready for operation (used), General Data Machine weight 13000 kg Measurements height 2082 mm Control Unit Brand AMADA Model AMNC-F Dimensions Machine Length 4165 mm Main Drive Punching force 200 Kn This AMADA AC2510 NT was manufactured in 2008. It features a punching force of 200 kN and a turret capacity of 51 stations. It can handle sheet sizes up to 1270 × 5000 mm and thicknesses up to 3.2 mm. The machine supports a maximum sheet weight of 150 kg and offers high-speed turret indexing. If you are looking to get high-quality punching capabilities, consider the AMADA AC2510 NT machine we have for sale. Contact us for more information. Application Types Iodpfjx D Em Iex Adwotb Punching

Condition: excellent (used), Year of construction: 2014, operating hours: 7,998 h, machine/vehicle number: 43610191, sheet thickness aluminum (max.): 6 mm, We are offering an Amada EML 3610NT punch laser combination machine for sale. The offered machine is used and in a very good condition. Main features of the machine (overall): - Possibility of combining punching and laser burning - automatic pick-up of details (suction cups for 45kg, small amount of perforation recommended) and exchange of pallets during the operation of the machine - automatic sheet feeding maximum length 3050x1500 and collection of residues after cutting, possibility of sheet loading during machine operation - automatic bale delivery 1500x400mm (two conveyor belts for details) - turning station with 41 fixed and 4 rotating stations - 3 manually adjustable paws - cutting elements on length 3020x1500 - Laser cutting length 2000x1500 - max. sheet thickness 6mm (due to brush table) - thread function - pneumatic hold-down device Accessories for the machine: - Light barrier - Thread cutting set - Sensor for bale chute - System for chip extraction - Separate lubrication of punching and threading tools - Bending sensors for sheet metal - A conveyor belt that pulls out the punching waste Machine data as of 17.09.2024 - Time of the running machine: 7998 hours Itedpfxeum R T Ss Adwob - Operating time: 2972 hours - Cutting time: 1196 hours - Working time of the resonator: 6154 hours AMADA EML3610NT - Max. Cutting force: 300 kN - Power (laser efficiency): 4kW (CO2) - Type: EML-NT - No. 43610191 - Model:EML3610NT - Year of manufacture: 2014 November - Total value of the connection to the network: 400V/68.3 kVA - Connected load: 85 kVA - Compressed air connection: 8 bar; 48 m3/h - Width of the guarded area: 30m (max) - Minimum safety distance: 1.36 m - Response time of the machine + total response time of the firewall: 320ms - Stop time: 300 ms - Machine braking distance: 180mm - Weight of the punching/laser machine: 24,000 kg PRIII (reception of finished parts) - Model: PR III 300 L 2P - No.: 2424 - Year of construction: 2013 - Connection to the network: 400/50V/Hz - Max. Power supply: 8.5 kW - Compressed air connection: 6 bar 1000 l/min. - Dimensions and weight of the elements to be collected: Workpiece thickness from 0.5 to 3mm Min.150x150mm max. 2500x1000mm with a weight of no more than 45kg - Machine weight (PRIII): 4600 kg ASIII MP (sheet feeder) - Model: ASIII MP 300 - No.: 2994 - Year of construction: 2015 - Connection to the network: 400/50V/Hz - Max. Power supply: 12kW - Compressed air connection: 6 bar 1000 l/min. - Size of sheets that can be stored: Max. 3000x1500mm Minimum steel thickness 1000x300mm from 0.5 to 8mm Weight of a single sheet no more than 300kg - Machine weight (PRIII): 12 000 kg The price is for the entire machine only. The price does not include Tools, dismantling, transportation and commissioning If you have any further questions, please do not hesitate to contact us. The machine is offered in different sources. If you are interested, please confirm availability.

Condition: ready for operation (used), Year of construction: 2008, General Data Machine weight 21000 kg Table Table load 160 kg Main Drive Number of axis 2 Movement X-Axis Movement 2500 mm Ijdpfex Enlxjx Adwstb Y-Axis Movement 1525 mm This AMADA EMZ 3610 NT was manufactured in 2008. It features a press force of 300 kN, can handle material up to 4.5 mm thick, and supports a maximum table load of 160 kg. The machine includes 45 turret stations with auto-index and achieves a stroke rate of 1000 strokes/min. If you are looking to get high-quality punching capabilities consider the AMADA EMZ 3610 NT machine we have for sale. Contact us for more information. Application Types Punching

Condition: ready for operation (used), Year of construction: 2011, General Data Machine weight 21000 kg Main Drive Punching force 300 Kn Number of axis 2 Table Table load 160 kg Control Unit Brand FANUC Movement X-Axis Movement 2500 mm Y-Axis Movement 1525 mm This AMADA EMZ 3610 NT CNC punching machine was manufactured in 2011. It features a Fanuc control system, a punching force of 300kN, and a working area of 2500 x 1525 mm, extendable to 5000 x 1525 mm with repositioning. The machine can handle sheet thicknesses up to 4.5 mm and supports a maximum table load of 160 kg. If you are looking to get high-quality punching capabilities, consider the AMADA EMZ 3610 NT machine we have for sale. Contact us for more information. Ijdpfsx D Hpqex Adwstb Application Types Punching

Condition: excellent (used), functionality: fully functional, Year of construction: 2006, operating hours: 60,120 h, control type: CNC control, degree of automation: semi-automatic, actuation type: electric, controller manufacturer: Amada, laser type: CO₂ laser, laser source manufacturer: FANUC AF 4000 E, laser hours: 60,120 h, laser power: 40,000 W, sheet thickness (max.): 6 mm, sheet thickness steel (max.): 6 mm, sheet thickness stainless steel (max.): 6 mm, sheet thickness aluminum (max.): 6 mm, sheet thickness brass (max.): 6 mm, working length: 3,050 mm, working width: 1,620 mm, working height: 380 mm, repeat accuracy: 0.1 mm, type of cooling: water, year of last overhaul: 2025, Equipment: CE marking, centralized greasing system, cooling unit, documentation/manual, dust extraction, emergency stop, fume extraction, safety light barrier, 4kw, CO2, Fanuc, new turbine in 2025 & vacuum pump. Everyday at work. Automation LKI MP 300 Itjdpfx Adsxa Dxuswob

Condition: used, Year of construction: 2007, Amada punch press EMK 3610NT including MP300 loading unit for sale. We would like to sell the machine as a complete package with tooling and a Wilson X-Sharp grinding machine. Isdpfxow Hww Hj Adwetb The standard tools are listed in the attached inventory. I can send it to you via email.

Year of construction: 2007, condition: ready for operation (used), An Amada CNC turret punching machine for medium format sheets including an MP300 M loading unit, Wilson X-Sharp grinding machine and numerous standard and special punching tools are available. 1) CNC turret punching machine Amada, year of manufacture: 2007, punching force: 300kN, max. sheet dimensions X/Y: 3000mm/1500mm, max. sheet thickness: 6.35mm, stroke rate: 600 strokes/min, simultaneous positioning speed: 128m/min, repeat accuracy: +/-0.1mm, machine dimensions X/Y/Z: approx. 5100mm/3200mm/2300mm, weight: approx. 18000kg. 2) Automatic sheet loading and unloading system Amada MP 300 M, max. sheet dimensions X/Y: 3000mm/1500mm, min. sheet dimensions X/Y: 1000mm/300mm, sheet thickness range: 0.8mm-6mm, max. load capacity per pallet: 3000kg, max. stacking height: 400mm, max. sheet weight: 170kg, max. pallets: 9, pallet change time: 25s, sheet loading time: 18s, weight: approx. 4900kg. 3) Wilson X-Sharp tool grinding machine. Documentation available. On-site inspection is possible. Iodpfjwhp N Djx Adwotb

Condition: ready for operation (used), functionality: fully functional, Year of construction: 2011, operating hours: 97,000 h, laser power: 2,500 W, sheet thickness (max.): 6 mm, workpiece length (max.): 2,000 mm, workpiece width (max.): 1,500 mm, Submission of a bid obligates the buyer to collect the machine on time by 05/09/2025! The machine has been serviced by the manufacturer. TECHNICAL SPECIFICATIONS Power and Cutting Force Cutting force: 300 kN Power: 2.5 kW (CO₂) Workpiece Cutting elements to length: 3,020 × 1,500 mm Laser cutting length: 2,000 × 1,500 mm Itjdow Axa Uepfx Adweb Max. sheet thickness: 6 mm Stations Turret station: 41 fixed and 4 rotatable stations MACHINE DETAILS Electrical Data Connected load: 400 V / 68.3 kVA Apparent power: 60 kVA Compressed Air Connection Compressed air connection: 8 bar Compressed air consumption: 48 m³/h Occupational Safety Width of protected area: 30 m Minimum safety distance: 1.36 m Machine reaction time + total fire protection wall reaction time: 320 ms Overrun time: 300 ms Machine braking distance: 180 mm Weight of the punching/laser machine: 30,000 kg EQUIPMENT Automatic part removal (suction cups) up to 45 kg Automatic sheet metal feed max. 3,050 × 1,500 mm Automatic bale output 1,500 × 400 mm Double loading ramp Light barrier Wire cutting kit Bale push sensor Chip extraction Conveyor for offcuts removal Separate lubrication for punching and threading tools Sheet bending sensors Punches included in the offer Loading of the machine can be arranged upon request. A large tooling package can be purchased for an additional 10,000 EUR.

Year of construction: 2010, condition: ready for operation (used), A CNC turret punching machine Amada and an automatic loading and unloading unit LKI Käldman (Amada) are available. 1) CNC turret punching machine Amada EMZ3610, year of manufacture: 2010, pressing force: 300kN, travel X/Y: 2500mm/1525mm, travel X/Y with repositioning: 5000mm/1525mm, max. material thickness: 4.5mm, max. table load: 160kg. Traversing speed X/Y: 100m/80m/min, axis speed: 128m/min, positioning accuracy: +/-0.1mm. Turret stations 45, auto-index stations: 2xB/2xC, turret speed: 30rpm, stroke rate: 1000 strokes/min, machine weight: approx. 21000kg. 2) Loading and unloading system LKI Käldman (Amada) MP Sheetcat 3015, year of manufacture: 2017, min. sheet dimensions X/Y: 1000mm/300mm, max. sheet dimensions X/Y: 3050mm/1525mm, sheet thickness: 0.8mm-6mm, max. sheet weight per pallet: 3000kg, suction cups: 34, machine dimensions X/Y/Z: approx. 8400mm/3600mm/3100mm. Documentation available. On-site inspection is possible. Iodpfx Aov Rp Tcjdwstb

Condition: excellent (used), Year of construction: 2007, Amada AC 2510 NT CNC Turret Punch Year 2007 200kN force, 51 tool stations Country of Manufacture: Japan Bridge Type 20 tonnes (196kN) Press Type AC Servo Drive Axis Traverse Distance 1270 x 2500mm Workable Maximum Sheet Size 1270mm x 5000mm (with auto repositioning) Fully serviced with Amada uk. Max. Material Thickness 6.4mm mild steel Max. Hole Diameter 88.9 mm Max. Material Weight 150 kg No. of Stations 24 A up to 12.7 mm 18 B up to 31.7 mm 3 C up to 50.8 mm 2 D up to 88.9 mm 3 AI up to 31.7 mm 1 AI up to 50.8 mm Axis Speed (X, Y) 100 m/min Hits Per Minute Turret Speed Bi-Directional 30 R.P.M Punching Accuracy 0.1 mm (incl 1 reposition) Ram Stroke Length 41 Tool Lubrication Axis Drives Electric Power Required 19 KVA Air Pressure Required 5.0 Kgf/cm2 Air Flow 500 l/min Machine Length 4165 mm Machine Width 5120 mm Machine Height 2082 mm Machine Weight 13000 kg AMNC-F windows based network control 15″ Colour LCD touch screen Iodpfxowgb E Uo Adwstb

Condition: ready for operation (used), Year of construction: 2009, operating hours: 69,572 h, overall weight: 10,100 kg, total height: 2,010 mm, number of axes: 3, This 3-axis AMADA LC 3015 F1 NT CO2 laser cutting machine was manufactured in 2009. It has a mass of 11.4 tons and requires 98 kVA of power, with a laser capacity of 4.0 kW. If you are looking to get high-quality cutting capabilities, consider the AMADA LC 3015 F1 NT machine we have for sale. Contact us for more information. Machine Benefits Technical Machine Benefits • Power required: 98 kva • Capacity: 4 kw • Laser resonator: af4000i-b • Transformer: marx tg 516 Extra Information Machine with transport box (L x W x H): 7120×3150×2370 mm Weight (with transport box): 13,500 kg Laser Resonator (L x W x H): 2460×1140×1965 mm Laser Resonator Weight: 1,300 kg Combined Unit (L x W x H): 2332×1638×2201 mm Itjdpfx Adox D Enlowjb Combined Unit Weight: Approximately 1,750 kg Transformer (L x W x H): 950×800×950 mm Transformer Weight: 484 kg Pallet Changer (L x W x H): 3868×2352×1010 mm Pallet Changer Weight (without liftable ball supports): 2,450 kg Pallet Changer Weight (with liftable ball supports [option]): 3,500 kg Electrical Connections Total Power Connection of the System: 400 V / 127 KVA Transformer Power Connection: 400 V / 89 kVA / 160 A Combined Unit Power Connection: 400 V / 38 kVA /55A Laser Resonator Power Connection: 200 V / 55 KVA Control and Drives Power Connection: 200 V / 34 kVA Operating Voltage: 3×400 V(±10%)/PE/50 Hz Max. Current Draw: 55 A Transformer Rated Power: 89 KVA Transformer Rated Primary Voltage: 3×400 V(±10%) Transformer Rated Secondary Voltage: 3×200 V Transformer Rated Primary Current: 132 A Transformer Rated Secondary Current: 257 A Compressed Air and Gas Requirements Total Compressed Air Requirement (air not used as cutting gas): 7 bar; 69.6 m 3/h Total Compressed Air Requirement (air used as cutting gas): Max. 9.7 bar; 132.6 m 3/h Compressed Air for Machine Functions ("Cooling Cut" and "Oil Shot"): 6 bar; 18 m 3/h Compressed Air for "ECO CUT": 6 bar; 18 m 3/h Compressed Air for Fume Extraction System DELTAComp 1500-8/9: 5 bar; 5.6 m 3/h Laser Gas Consumption: 10 liters per hour Cutting Gases: Oxygen, Nitrogen, and compressed air (if used as cutting gas) are required. Environmental and Location Requirements Operating Room Temperature: +15 to +35 °C Room Height: At least 4 m Lighting: At least 500 Lux Humidity: Less than 75% (without dew condensation) Vibrations: Must be resistant to seismic acceleration below 0.05 G (0.49 m/s 2) with an amplitude below 5 µm. Foundation Load Capacity: ≥49 kN/m 2

Condition: ready for operation (used), Year of construction: 2012, operating hours: 15,279 h, controller manufacturer: AMADA, number of axes: 6, overall weight: 8,100 kg, total height: 1,988 mm, pressing force: 133 t, product length (max.): 4,755 mm, This 6-axis AMADA HD 1303 NT press brake was manufactured in 2012. It features a press capacity of 1300 kN, a bending length of 3110 mm, and a stroke of 250 mm. With a throat depth of 420 mm and speeds up to 200 mm/s, it's designed for efficient operation. Consider the opportunity to buy this AMADA HD 1303 NT press brake. Contact us for more information about this machine. • Distance between uprights: 2700 mm • Stroke: 250 mm • Open height: 590 mm • Throat depth: 420 mm • Speeds: • Approach: 200 mm/s • Working: 12 mm/s Itedpfx Ajx D Evpsdwjb • Return: 120 mm/s • Hydraulic system: Oil tank capacity 48 liters • Ambient temperature range: 0–40 °C Technical Specification Bending Length 3110 mm

Condition: good (used), Year of construction: 2012, Amada LC 2012 C1 NT / Punch - Laser Machine, Year of manufacture: 2012, Isdpfeyay Tpex Adwotb Control: AMNG - Fanuc Series, Punching force: 200 kN, Punching area: 2,500 x 1,270 mm, Laser power: 2,500 W, Laser cutting area: 2,000 x 1,270 mm, Z-axis travel: 100 mm, Max. table load: 150 kg, Turret stations: 46 positions,

Condition: ready for operation (used), Year of construction: 2011, General Data Machine weight 18000 kg Clamping Unit Clamping force 2200 kN Opening stroke Max. 350 mm Main Drive Bending length 6000 mm Stroke 350 mm Pressing force 2200 Kn This AMADA HFP NT 220-4L press was manufactured in 2011. It features a maximum press force of 2200 kN and a stroke up to 350 mm, weighing 18000 kg. A robust choice for heavy-duty operations, the AMADA HFP NT 220-4L machine we have for sale is ideal for your pressing needs. Contact us for more information. Iodox D Ey Uopfx Adwjtb Application Types Bending

Condition: excellent (used), functionality: fully functional, Year of construction: 2007, operating hours: 64,000 h, machine/vehicle number: 20306061, working width: 3,110 mm, stroke length: 200 mm, throat depth: 415 mm, distance between stands: 2,700 mm, pressing force: 100 t, Amada Astro II 100 NT bending cell. Includes loading robot, bending robot, repositioning device with extra support, loading table, conveyor for unloading pallets (currently disconnected), safety fence. Comes with multiple loading and bending grippers, both clamp and vacuum type. Worksheet loading both as stack or vertical loading unit. Bending force: 980kN Table length: 3110 mm Stroke: 200 mm Open height: 500 mm Worksheet thickness min: 0.6 mm Worksheet dimensions min: 150 x 150 mm Worksheet dimensions max: 800 x 1000 mm/ 300 x 1800 mm Ijdpfewakicox Adwotb Worksheet mass max: 20 kg (including bending robot gripper/ loading robot gripper) Serviced by local Amada representative.

Condition: excellent (used), Year of construction: 2005, Technical specifications: Working length: 3100 mm Column width: 2650 mm Press force: 100 tons CNC control: AMADA AMNC PC 3D-graphic 15-inch TFT color screen Controlled axes: Y1/Y2; X1/X2; R1/R2; Z1/Z2 Dual speed of the X, R, and Z axes Automatic crowning Motorized adjustable backgauge Thrust: 550 mm Stroke: 350 mm Working height: 960 mm Laser monitoring: FIESSLER Motor power: 9 kW Dimensions (length x width x height): approx. 4300 x 2300 x 2950 mm Weight: approx. 8 tons Itsdpfxev I Sp Io Adweb Accessories: 1 set of segmented AMADA tools The seller is not liable for typing or data transmission errors. The machine's appearance, technology, and wear are commensurate with its age; used machines are sold without any warranty.

Condition: used, Year of construction: 1998, machine/vehicle number: 100057, 1998 AMADA VIPROS 2510 KING The punching machine is in good condition, always serviced on time by Amada service. All documentation is included. This machine can be operated with a punching force of 196 kN. Made in Japan. The punching machine is still under power and can be tested at any time in Vilnius, Lithuania. Itodjm Ncayepfx Adweb Specification: Model: AMADA VIPROS 2510K Serial no: 100057 Year: 1998 Made in: Japan Punching force: 20 tons Stations: 31 Tools: included (RO 6; RO 6,5; RO 3; RE 30x5; RE 25x5; RE 80x5; RO 5; RO 3,5; RE 10x3; RE 10x5; RE 50x5; RE 8x12) Maximum sheet thickness: 3 mm X-axis movement: 2500 mm Y axis travel: 1270 mm Weight: 11 000 kg Location: Vilnius, Lithuania Testable: Yes If you have any questions, please do not hesitate to contact us.

Condition: good (used), functionality: fully functional, Year of construction: 2010, operating hours: 15,996 h, overall weight: 6,750 kg, input voltage: 400 V, 1000 KN Max. stroke: 200 Weight: 6750 Noise level: 74 dB Year of manufacture: 07/2010 Voltage: 400 V / 50Hz Rated current: Current operating hours: 15,996 hours with manual angle measurement and correction system with safety laser UVV inspection on a regular basis / maintenance always carried out by Amada on a regular basis Accessories: Tool die: 2 pieces UKB 20.478 V8/12 30° 835mm 3 pieces UKB 20.344 V4/V7 88° 835mm Tool holder: 4 pieces UKB substructure for double V die 20.287 + 60.919 835mm Bending swords: 5 pieces UKB 10.261 H100 R0.6/90° 2 pieces UKB 11.158 H80 R0.6/30° 2 pieces UKB 11.200 H66 R0.8/90° Other: Light barrier in need of repair (new price approx. €4500) – separately as a replacement as an attachment (has been renewed) The machine can be inspected under power in DE84051 Mettenbach by appointment. Sale only to commercial customers and with exclusion of any warranty! Iedpotwliwsfx Adwetb

Condition: ready for operation (used), functionality: fully functional, Year of construction: 2008, laser power: 4,000 W, table length: 1,500 mm, table width: 3,000 mm, Equipment: cooling unit, No minimum price – guaranteed sale to the highest bidder! The machine was serviced in 2022 by an Amada specialist. The service protocol can be found attached to this listing! Iedjxgg Irjpfx Adwetb TECHNICAL DETAILS Laser power: 4 kW Table width: 3,000 mm Table length: 1,500 mm EQUIPMENT Ridel chiller Donaldson extraction unit 2 exchange tables

Condition: ready for operation (used), functionality: fully functional, Year of construction: 2011, operating hours: 13,000 h, machine/vehicle number: MP2512C1, sheet thickness (max.): 6 mm, working length: 2,500 mm, working width: 1,270 mm, rapid traverse X-axis: 80 m/min, rapid traverse Y-axis: 60 m/min, No reserve price – guaranteed sale to the highest bidder! Bidding obligates you to collect the item on time by 15/12/2025!  The machine has been regularly serviced by Amada. TECHNICAL DETAILS Punching working area X x Y: 2,500 x 1,270 mm Laser working area X x Y: 2,000 x 1,270 mm Rapid traverse X-axis: 80 m/min Rapid traverse Y-axis: 60 m/min Accuracy: ±0.07 mm Maximum material thickness: 6 mm Press force: 200 kN Max. strokes X-axis: 370 rpm Max. strokes Y-axis: 280 rpm MACHINE DETAILS Power consumption: 22 kVA Machine weight: 18,000 kg Iodpfx Aexzf T Aodwstb Operating hours Laser hours: 13,000 h Punching hours: 17,000 h Note: Information regarding the tools can be found in the attached images.

Condition: good (used), functionality: fully functional, Year of construction: 2007, operating hours: 13,800 h, AMADA ASTRO II 100 NT bending cell Automatic bending/folding cell - press brake with bending robot Itedpfxjxgbmce Adwjb Manufacturer: AMADA Type: ASTRO 100 NT Year of construction: 2007 Condition: used Control: AMNC II PC Switch-on hours: 38536h Automatic operation: 13739h Pressing force: 100 tons bending length: 3000 mm Tool clamping: AMADA, standard Clearance between uprights: 2700 mm Projection: 415 mm Stroke: 200 mm Installation height: 500 mm Adjustment range backgauge: 600 mm Width of the work table: 60 mm