Used Amada Europe 258 for sale (212)

Condition: used, Year of construction: 2001, machine/vehicle number: 258116, Working hours machine: 36101 h Max. punching force: 200 kN Godpfjvmfzzox Aabsuh Working range punching: 2000 (4000) x 1270 mm Control: Fanuc 18-P Length: 6190 mm Width: 5000 mm Height: 2450 mm Machine weight: 12000 kg Standard configuration Traversing speed X/Y: 65 / 50 m/minAxis simultaneous: 82 m/min Position deviation: +/- 0.1 mm Number of turret stations: 31 of which AutoIndex stations: 3 (2 x B, 1 x C) Turret rotation speed: 25 1/min 2 Max. number of punching strokes: 520/min Machine frame: Bridge frame Press drive: hydraulic Drives turret + table drive: AC servo motors Clamping of clamping claws: pneumatic Electrical connection: 400V / 50Hz Electrical consumption machine: 30 kVA Compressed air consumption machine: 6 bar, 250 l/min  Extended machine accessories

Condition: like new (used), Year of construction: 2001, AMADA EUROPE 245 turret press Technical data : - CNC control : FANUC 18 i-P - pressure : 20 Ton - max. punching format without interceptor and with 31 station head : 1020 x 1290 (Y-10; Y1010 T2XX; Y-50; Y970 T3XX) - max. size of punched sheet with interceptor : 1020 x 2540 mm - max. size of punched sheet with capture + 1 turn (optional) : 1500 x 2540 mm - max. sheet thickness on ball table : 6 mm - max. thickness of sheet on brush table : 3 mm - max. permissible weight on table : 100 kg - punching accuracy : +-0.1 mm - positioning accuracy : +-0,07 mm - number of pneumatic clamps/grips : 2 - number of axes controlled simultaneously : 3: X, Y, C - turret speed : 25 rpm. - number of strokes per min, distance 25.4 mm, cylinder stroke 6.5 mm : 220 strokes/min. - stroke punching, distance 1 mm, cylinder stroke 6.5 mm : 480 strokes/min. - minimum programmable increment : 0.001 mm - number of tool stations - 31, including 3 rotary ones - max. tool diameter : 88,9 mm - rotary stations : 2x1 1/4"; 1x2" - max. sheet thickness for rotary station : 3 mm - slider : hydraulic - bottom feed feed turning point : 4 programmable points - working table : X=600, Y=400 - memory capacity : 64 (~63 programs) Kb - graphic screen : 10,4" LCD - stop time : 295 ms - air pressure : 5 kg/cm2 (bar) - air volume : 250 Nl/mn - oil amount : 160 L - light curtain (3 beams) : standard in European countries - installed power : 27 kW - machine dimensions : L=4460 mm, l=2750 mm, h=2130 mm - transport dimensions : L=4820 mm, l=2500 mm, h=2414 mm - weight of punching machine AMADA EUROPE 245 : 10 000 kg - time worked : 35 000 working hours Production 2000.12 , installation 2001 1 szy owner , service book with full history of the machine, machine in perfect condition, worked on thin sheets Start-up warranty Training on operation included in the price. Guodpfx Aajhvaaasbjh Contact person : Robert 500114006 Greetings

Condition: used, Year of construction: 2002, functionality: fully functional, machine/vehicle number: E2510018, working range: 2,500 mm, feed rate Y-axis: 1,250 m/min, Used Amada punch-nibbling machine, type Europe 2510, with LKI MP250 loader/unloader for medium format 2500x1250mm AMADA PUNCH-NIBBLE Type: EUROPE-2510 Year of manufacture: 2002 LOADER/UNLOADER LKI Guedpfx Aaswc Rkfsbjh LKI MP 250 Year of manufacture: 2002

Condition: like new (used), Year of construction: 2004, AMADA MODEL HFT 8025 80 tons capacity x 2500 bending length hydraulic downstroking press brake complete with CD 2000 4 AXIS colour graphic cnc control, ERWIN SICK machine mounted electronic guards , side and rear interlocked fencing Model Amada HFT 8025 downstoke CNC Press brake Year 2004 Tonnage 100 KN Type CD 2000 CNC Controlled Axis Y1, Y2, X, R Max. Bend Length 2500 mm Open height 470 mm Stroke Length 350 mm Approach Speed 100 mm/sec Bending Speed 1 - 10 mm/sec Return Speed 1-100 mm/sec Oil Capacity Motor Power 7.5kw Weight 6100 kg Bed Length 2500 mm Bed Width 60 mm Guodpfx Aasu A Dgrjbeh Open Height 470 mm Throat Depth 420 mm CNC Control Backguage Stoke (X axis) 700 mm/s Max gauge 1000mm R axis 250mm can be demonstrated under power BROCHURE AND FURTHER INFORATION AVAILABLE UPON REQUEST

Condition: ready for operation (used), functionality: fully functional, Year of construction: 2008, laser power: 4,000 W, table length: 1,500 mm, table width: 3,000 mm, Equipment: cooling unit, No minimum price – guaranteed sale to the highest bidder! The machine was serviced in 2022 by an Amada specialist. The service protocol can be found attached to this listing! TECHNICAL DETAILS Laser power: 4 kW Table width: 3,000 mm Gedpfx Ajxgg Ireabouh Table length: 1,500 mm EQUIPMENT Ridel chiller Donaldson extraction unit 2 exchange tables

Condition: excellent (used), Year of construction: 1983, functionality: fully functional, ram adjustment: 90 mm, table width: 900 mm, table length: 550 mm, overall weight: 6,150 kg, pressing force: 60 t, type of input current: three-phase, power: 5.5 kW (7.48 HP), compressed air connection: 5 bar, warranty duration: 5 months, input voltage: 200 V, year of last overhaul: 2021, Equipment: documentation/manual, Amada TP 60C-X2 Eccentric press with air clutch for sale in new condition Year of manufacture: 1983 Guedou Haqhspfx Aabsh pressing force 60t two-handed operation central fattening stroke length: 90mm number of strokes: 65-100/min table-bear distance: 275mm stroke adjustability: 80mm table size: 900x550mm bear size: 500x400mm total response time: 175ms voltage: 200v 50Hz 5.5kw machine weight: 6350 kg

Year of construction: 2004, condition: used, Applicable material: Metal Auction item. Laser cutting machine was in working condition. Dismantled 2 months ago. Brought from France. Sold together with automatic feed system, filtration system, conditioner and transformer. Sold as seen in pictures. Guedpfxoxmfgte Aaboh

Condition: good (used), Year of construction: 1998, pressure 50 t chamfer lenght 1250 mm distance between columns 1070 mm Stroke beam 100 mm Gujdpoxl E Tkefx Aabsh max. opening beam/table 370 mm C-recess 300 mm max travel X-axes 400 mm R1 and R2 axis controlled by cnc 100 mm Z1+Z2 axes controlled by cnc manuell mm Quick speed,inspeed 100 mm/sec bendingspeed 0-10 mm/sec opening speed 100 mm/sec Number of working hours 56000 h length 1600 mm width 1500 mm height 2000 mm weight 2600 kg total power requirement 2,5 kW dimensions of the machine ca. 2x2x2 m weight of the machine ca. 2,56 t All machines can be viewed under power at all times. Demonstrations of the machines possible at any time.

Condition: like new (used), functionality: fully functional, Year of construction: 2017, operating hours: 2,600 h, control type: CNC control, controller model: Fanuc 32 C, Equipment: documentation/manual, Standard programs such as parameter settings Dressing settings Speed settings Program management settings Limitation of travel distances x + y Basic parameter settings Grinding wheel management program Warming-up cycle program Surface plunge grinding program Measuring program 15 kVA transformer Full enclosure Meister G3 Spindle upgrade to 3.7 kW, disc 225 mm ETHER interface for network connection Control module with extended memory Fanuc Macro B option Program creation for batch programs Programmable spindle speed Gujdpfxjw I Tt Se Aabeh WinWop program for contour creation (Windows) WINWop program for error compensation WinWop postprocessor CGS Complete Grinding Solutions software Option Dressing Swiveling profile dressing device Diamond dressing wheel Pre-dressing device VPA 100 L Diamond wheel 100 mm for pre-dressing device Regrinding package diamond wheel G3 / W Option – Clamping and Balancing Magnetic chuck 400 x 200 400 mm stop bar with prism Fully automatic balancing device, size 1 Grinding wheel flange for G3, bore 51 mm Option Filter Systems Belt filter system 175 l Extraction unit for emulsion mist 500 Inquiries only from Europe, preferably the EU.

Condition: ready for operation (used), Year of construction: 2005, General Data Machine weight 11600 kg Control Unit Brand AMADA Gjdpfx Aasxcztbsbjuh Main Drive Pressing force 1700kN Stroke 200mm This AMADA HFE170-3 press brake was manufactured in 2005. It features a maximum press force of 1700kN and a stroke up to 200mm. Weighing 11600kg, it operates on 400 Volts 50 Hz with a foreseen power of 16.5kW. Contact us for more information about this machine. Application Types Bending

Condition: excellent (used), Year of manufacture: 1991 Model: ITPS III Serial number: ITPS 80C 25 P1C226 Maximum pressing force: 1800 kN Working stroke: 115 mm Power supply: 415 V, 50 Hz, 3 phases Rated current: 119 A Installed power: 18.5 kW Gedpfx Aaowq Dpqsbjuh Machine weight: 4940 kg Inventory number: 9.14 Control: Delem DA-65R

Condition: excellent (used), functionality: fully functional, Year of construction: 1994, pressing force: 80 t, Equipment: safety light barrier, Brand: Amada Guodpfovncifjx Aaboh Type: ITS 80-25 Year of manufacture: 1994 Pressing force: 80t Bending length: 2500mm Throughput: 400mm Stroke: 100mm Power: 9.5kW Overall dimensions: 3010*2230*2230mm Weight: 4950kg

Condition: reconditioned (used), Year of construction: 2017, operating hours: 2,710 h, functionality: fully functional, grinding length: 1,000 mm, grinding width: 600 mm, distance table to spindle center: 750 mm, table length: 900 mm, table load: 1,500 kg, type of input current: three-phase, table width: 600 mm, grinding wheel width: 50 mm, overall weight: 11,000 kg, grinding spindle motor power: 11,000 W, grinding wheel speed: 2,000 rpm, input voltage: 400 V, Equipment: documentation/manual, TECHNICAL CHARACTERISTICS: Gusdpfx Aajwuk Inobeh CNC control : FANUC series 32i-B Colour touch screen : 15 ["] W axis travel (longitudinal axis) : 1300 [mm] Min. Stroke speed W axis : 0.1 [mm/min] Max. Stroke speed W axis : 40000 [mm/min] Rapid traverse rate W axis : 40000 [mm/min] X axis travel (transverse movement) : 660 [mm] Min. Stroke speed X axis : 0.1 [mm/min] Max. Stroke speed X axis : 5000 [mm/min] Rapid traverse rate X axis : 5000 [mm/min] Resolution X axis : 0.0001 [mm] Stroke Y axis (vertical movement) : 750 [mm] Min. Stroke speed Y axis : 0.1 [mm/min] Max. Stroke speed Y axis : 500 [mm/min] Rapid traverse rate Y axis : 2000 [mm/min] Resolution Y axis : 0.0001 [mm] Table length : 900 [mm] Table width : 600 [mm] Max. distance spindle nose / table : 750 [mm] Max. load on table : 1500 [Kg] Grinding wheel min. speed : 300 [rpm] Grinding wheel max. speed : 2000 [rpm] Grinding spindle motor power : 11 [kW] Max. diameter grinding wheel : 405 [mm] Max. grinding wheel width : 50 [mm] Grinding wheel bore : 127 [mm] Total power required : 29 [kVA] Weight : 11000 [Kg] EQUIPMENT / INCLUDED OPTIONS: x1 electro-magnetic chuck 900 x 600 [mm] x3 linear glass scales on the 3 linear axes x1 workpiece probe x1 paper tape filtration unit x1 oil chiller DAIKIN AKZ149-C x1 oil mist collector IFS type M 1600 x1 transformer The information on this page has been obtained by the best of our ability. Therefore, its accuracy can not be guaranteed

Condition: good (used), Year of construction: 1989, Punching machine Manufacturer: Amada Model: Aries 245 Year of manufacture: 1989 CNC control: Amada 04PA Operating hours: approx. 20,000 Punching force: 200 kN Sheet thickness (stainless steel) max.: 3 mm Sheet thickness (mild steel) max.: 4 mm Sheet thickness (aluminum) max.: 3 mm Travel paths: 1,270 x 1,000 mm Turret: 20 stations (2x indexable B-stations) Incl. complete tool set! Power: 11 kVA Dimensions (LxWxH): 2,700 x 3,784 x 1,950 mm Goderxrgdspfx Aabjuh Weight: 7,500 kg plus 2,500 kg base plate 91025ä

Condition: excellent (used), functionality: fully functional, Year of construction: 2005, operating hours: 12,096 h, Amada hydraulic press brake type HFT 130-3 working width 3100 mm max. pressing force 130 tons CNC-controlled Y1 Y2 X and R axes CNC control CNC OP 2000 Fiessler light curtain Drive power 12.5 kW Weight 8200 kg Gujdpfsxhfuysx Aabjh

Year of construction: 2017, condition: ready for operation (used), General Data Measurements width 2840 mm Measurements depth 9997 mm Measurements height 2285 mm Machine weight 12600 kg Control Unit Gsdpfxexlvbxs Aabsuh Brand AMADA Model AMNCF This 3-axis AMADA LCG-3015AJ 9kw + ASLUL TWIN TOWER was manufactured in 2017. It features a laser source AJ 9000, with cutting speeds up to 60 m/min and axis travel of 1550 x 3070 mm. Ideal for precise fiber laser cutting, it includes a 16-station nozzle changer and twin tower storage. Consider the opportunity to buy this AMADA LCG-3015AJ fiber laser cutting machine. Contact us for more information about this machine. Application Types Cutting

Condition: excellent (used), Year of construction: 2008, CNC laser cutting machine Amada LC3015 X1 NT 4KW, with 2 exchangeable tables The AMADA laser has been thoroughly tested by an AMADA service technician, is energized and ready for use. Year of manufacture: 2008 Type: Amada LC3015 X1 NT Laser power: 4kW Table: 3,000 x 1,500 mm Guodpsignzbsfx Aaboh Cooler Ridel Extraction Donaldson

Condition: excellent (used), Year of construction: 1983, functionality: fully functional, table width: 1,000 mm, table length: 600 mm, overall weight: 8,160 kg, pressing force: 80 t, stroke length: 100 mm, input voltage: 200 V, year of last overhaul: 2021, Amada TP 80C-X2 Eccentric press with air clutch for sale in new condition Year of manufacture: 1983 pressing force 80t stroke length: 100mm Gujdpfx Aaou E U Niobjh number of strokes: 60-100/min table-bear distance: 310mm stroke adjustability: 80mm table size: 1000x600mm bear size: 590x450mm sudden stop time: 195 ms maximum downtime 215ms machine weight: 8160 kg

Condition: reconditioned (used), Year of construction: 2014, functionality: fully functional, grinding length: 800 mm, grinding width: 400 mm, grinding wheel diameter: 355 mm, distance table to spindle center: 500 mm, table load: 1,000 kg, type of input current: three-phase, overall weight: 5,000 kg, grinding spindle motor power: 7,500 W, grinding wheel speed: 2,500 rpm, input voltage: 400 V, Equipment: documentation/manual, TECHNICAL CHARACTERISTICS: CNC control : FANUC series 32i-B W axis travel (longitudinal axis) : 1000 [mm] Min stroke speed W axis : 0.1 [mm/min] Max stroke speed W axis : 40000 [mm/min] Rapid traverse rate W axis : 40000 [mm/min] X axis travel (transverse movement) : 450 [mm] Min stroke speed X axis : 0.1 [mm/min] Max stroke speed X axis : 5000 [mm/min] Rapid traverse rate X axis : 5000 [mm/min] Resolution X axis : 0.0001 [mm] Stroke Y axis (vertical movement) : 500 [mm] Min stroke speed Y axis : 0.1 [mm/min] Max stroke speed Y axis : 500 [mm/min] Rapid traverse rate Y axis : 2000 [mm/min] Resolution Y axis : 0.0001 [mm] Table length : 600 [mm] Table width : 400 [mm] Max distance spindle nose / table : 500 [mm] Gsdpjwulg Eefx Aabjuh Max load on table : 1000 [Kg] Grinding wheel min speed : 300 [rpm] Grinding wheel max speed : 2500 [rpm] Grinding spindle motor power : 7.5 [kW] Max diameter grinding wheel : 355 [mm] Max grinding wheel width : 50 [mm] Grinding wheel bore : 127 [mm] Total power required : 23 [kVA] Weight : 5000 [Kg] EQUIPMENT / INCLUDED OPTIONS: x1 electro-magnetic chuck 600 x 400 [mm] x3 glass linear scales on the 3 linear axes x1 workpiece probe x1 paper filtration unit x1 oil chiller DAIKIN AKZ149M133 x1 oil mist collector IFS type IFMC 1100 x1 transformer The information on this page has been obtained by the best of our ability. Therefore, its accuracy can not be guaranteed

Condition: excellent (used), Year of construction: 1991, functionality: fully functional, Used automatic band saw Gsdjvbvr Hspfx Aabsuh Cutting area: (round) 700mm (rectangular) 700 x 800mm Saw band: 7600 x 50 x 1.6mm Saw band drive: 7,5kW Hydraulic drive: 2,2kW Total weight: 6000kg

Condition: good (used), functionality: fully functional, Year of construction: 2007, operating hours: 13,800 h, AMADA ASTRO II 100 NT bending cell Guodpfxsxgbmcj Aabeh Automatic bending/folding cell - press brake with bending robot Manufacturer: AMADA Type: ASTRO 100 NT Year of construction: 2007 Condition: used Control: AMNC II PC Switch-on hours: 38536h Automatic operation: 13739h Pressing force: 100 tons bending length: 3000 mm Tool clamping: AMADA, standard Clearance between uprights: 2700 mm Projection: 415 mm Stroke: 200 mm Installation height: 500 mm Adjustment range backgauge: 600 mm Width of the work table: 60 mm

Condition: like new (used), functionality: fully functional, Year of construction: 2021, control type: CNC control, laser type: fiber laser, sheet thickness steel (max.): 25 mm, sheet thickness stainless steel (max.): 15 mm, sheet thickness aluminum (max.): 12 mm, pipe diameter (max.): 220 mm, pipe length (max.): 6,000 mm, working length: 3,000 mm, working width: 1,500 mm, power: 3.15 kW (4.28 HP), Flatbed laser with tube cutting unit Gujdpfx Aaoxmikcsboh - 16-position automatic nozzle changer - 2-position cassette table - Industrial chiller KKT Chillers - Filter system Herding Comp 1500-9/9 SB - Laser hours: 1,595 - Cutting hours: 1,168 - Operating hours: 1,741

Condition: like new (used), Year of construction: 2013, Technical Data / technical details: The FLW is a flexible and highly productive laser welding cell with extensive equipment. The focused laser beam is used as an energy source to melt and join materials together. The laser welding cell consists of a fiber laser and a 6-axis industrial robot, which moves along a travel rail. The parts to be welded are clamped onto a rotary-tilting table. The safety enclosure is equipped with a sliding door to ensure safe operation. Robot: Type: M-710iC/50 (FANUC) Robot controller: SYSTEM R-30iA (FANUC) CNC control: AMNC Number of controlled axes: 6 Reach: 2,050 mm Welding head: AMADA Repeatability: 0.07 mm Safety enclosure: Full enclosure Robot track: Length: 1,500 mm Travel speed: 60 m/min Repeatability: ± 0.1 mm Positioning table: Working height: 700 mm Max. load capacity: 500 kg Rotary axis: ± 720° Tilting axis: ± 90° Laser source: Type: YLS4000-S2T Wavelength: 1,070 – 1,080 μm Laser power: 4 kW Control: Type: Amada Display: 15” LCD colour touchscreen Controlled axes: Robot and linear axis Coordination between robot and laser source Memory: 3 MB SRAM I/O interface: LAN, USB Gjdpfx Aasxndynobeuh Welding Head: Amada Focus position adjustment: -10 mm to 50 mm CCD camera for TAS system included as standard Optical weaving included as standard Cross jet nozzle included as standard Coaxial nozzle included as standard Welding wire feed: 0.8 to 1.6 mm Weaving System: The integrated rotary optics allow the laser beam to move in a circular pattern. The patented system by AMADA enables welding of larger gaps with or without filler material and even allows welding of aluminum. NC Focus System: The NC Focus System automatically sets the optimal focus position for the specific welding condition. It supports welding simple butt joints as well as hard-to-reach corners. Filler wire and intelligent gas supply: Up to 20 kg of filler wire can be used. When using the TAS (Teach Assistant System), the gas nozzle retracts automatically. TAS (Teach Assistant System): The TAS system eliminates time-consuming manual teaching operations. Deviation between the programmed and actual weld path is detected using a CCD camera. Condition: Very good condition Machine has been used very little: approx. 16,500 operating hours. The seller is not liable for typographical or data transmission errors. The machine’s appearance, technology, and wear are commensurate with its age; used machines are sold without any warranty.

Condition: excellent (used), Year of construction: 1986, functionality: fully functional, pressing force: 150 t, compressed air connection: 6 bar, input voltage: 200 V, Equipment: safety light barrier, Manufacturer: AMADA Type: TP-150C-X2 Gujdpfou Dw U Sox Aaboh Pressure: 150t Year of manufacture: 1986 Stroke length: 175mm Distance above table: (adjustable) 230-330mm Table size: 1250x750mm Bear size: 700x550mm Electrical power: 3x200V(!!), 11kW - ​​Japanese standard Net weight: 16326kg Automatic greasing system. Optionally with disc winder and straightener.

Condition: excellent (used), Year of construction: 1975, functionality: fully functional, saw band length: 3,660 mm, overall weight: 1,300 kg, cutting height (max.): 300 mm, table length: 400 mm, in excellent condition Horizontal band saw machine AMADA CRH-300S Gedpfxswvvr Is Aabouh manufacturer AMADA year of manufacture: 1975 Technical data Material: square 300x 300 mm Material: square 300 x 300 mm Max. material: round Ø 300 mm Max. machine load: 1200 kg Speed ​​27 - 95 m/min, infinitely adjustable Bimetal saw blade: 27 x 0.95 x 3660 mm single-sided receiving table: 0 - 400 mm Hydraulic rack and pinion vice for stack cutting saw band motor: 2.2 kW hydraulic pump motor: 0.75 kW Machine weight approx. 1.3 t Machine dimensions approx. 1625 x 1259 x 1200 m