Used Angle Drill for sale (11,223)

Year of construction: 1997, condition: used, Electrical power: 7kW, operating voltage: 380V, frequency: 50Hz, control voltage: 220V, current: 35A, control: Heidenhain. An on-site inspection is possible. Nedpfoz S Iwwsx Akmjdc

Condition: used, 4-spindle drilling head, adjustable multi-spindle drilling head, type V 604 G Factory No.: 4220 Drilling capacity per spindle: 6 mm Spindle drives: 4 units Gear ratio: 1:1 Spindle spacing (center of spindle to center of spindle, diagonally): 45 to 138 mm Drilling head spindle drive: 6 x 20 mm Centering flange on the drive: Ø 89.7 mm, 6x M8 threaded holes, bolt circle = 105 mm Tool holder: Ø 6 mm collet chucks Overall height from tool holder (bottom) to gearbox housing, outer edge (top): 218 mm Ndjdpfez Hfclsx Akmec - 4 spindle drives with collet chuck holders (collet chucks are not included in the scope of supply) - 4 tool spindles can be adjusted steplessly by rotating within the spindle spacing - Ideal for 4 drill holes in a square arrangement from 32 x 32 mm to 97 x 97 mm Dimensions Ø x H: 170 x 218 mm Weight: 7.7 kg Good condition

Condition: new, Year of construction: 2026, functionality: fully functional, travel distance X-axis: 230 mm, travel distance Y-axis: 150 mm, spindle speed (max.): 3,300 rpm, spindle speed (min.): 320 rpm, spindle mount: MK 2, throat depth: 182 mm, quill stroke: 80 mm, type of input current: three-phase, total length: 650 mm, total height: 900 mm, table width: 152 mm, input voltage: 400 V, total width: 580 mm, table length: 420 mm, drilling capacity: 16 mm, Equipment: documentation/manual, NEW MTP ZX7016 400V DRO drill-milling machine "Zośka" with digital depth readout + vice – 400 V – 12 months warranty on parts – delivery to any destination in Europe The Metal Technics Polska ZX7016 is a compact 2-in-1 drill-milling machine for drilling and light milling in metal. Compact dimensions, simple operation and a solid construction make it ideal for workshops, garages, service departments and hobby metalworking. A true classic, known for its excellent value for money. This version adds a digital depth readout panel with zero-reset function: it shows the vertical travel of the tool in millimetres, so you can set a reference point, reset to zero and drill or mill to an exact depth – and repeat settings easily, without guessing. TECHNICAL DATA • Spindle taper: MT2 • Max. drilling diameter: 16 mm • Max. face milling diameter: 40 mm Ndjdpfxjz Hz U Rs Akmsc • Max. end milling diameter: 10 mm • Spindle speeds: 320–3300 rpm (12 speeds) • Spindle stroke: 80 mm • Table size: 420 x 152 mm • Table travel: 230 x 150 mm • Spindle to column: 182 mm • Spindle to table: 360 mm • Dimensions with base: 650 x 580 x 900 mm • Weight: approx. 100 kg (packed: 68 × 58 × 77 cm) • Motor: 550 W • Voltage: 400 V / 50 Hz, three-phase STANDARD EQUIPMENT • Cross table with handwheels • Machine vice • Digital depth readout panel with zero reset • Drill chuck with chuck guard • 12-speed belt drive WARRANTY & DELIVERY • 12 months warranty on parts • Delivery to any destination in Europe – shipping cost calculated upon request • Price: EUR 415 net (excl. VAT) We ship to any address in Europe – the machine is carefully packed and delivered straight to your workshop. Get in touch and we will prepare a tailored delivery quote for your location.

Condition: used, machine/vehicle number: 008598, Max. panel width: 3200 mm Max. panel length: 1000 mm Ndodpfxsz Eyxls Akmjc No of Bottom Units: 6 No of Top Units: 2 Lateral horizontal groups: yes

Year of construction: 1991, condition: ready for operation (used), Available immediately, ex works: Drill press, Metalac Type BR 32 Year of manufacture 1991 Spindle taper MK 3 Drilling capacity: 32 mm steel, 40 mm cast iron Automatic feed Table: 600 x 470 mm Drilling stroke: 180 mm Overhang: 280 mm Ndedpfs Aa Inksx Akmjc 2 vices Coolant system Weight: 750 kg Price: EUR 1,250.00 plus VAT, ex works.

Condition: used, TM Bohrtechnik TMB 25 drilling rig, year of manufacture: 2011, compressor operating hours: 5,308 h, diesel engine operating hours: 8,002 h, 5x drilling rods, drilling head, dust collector, immediately ready for use, in good condition, German machine. Upon request, we will provide a leasing or financing offer from Mercedes-Benz Bank. Mr. Ebert (Tel. ) will be happy to assist you. For more information, please visit our website. Errors and prior sale excepted! Nedpfx Ajzm Eq Eokmsdc = Further information = Year of manufacture: 2011 Intended use: Construction Please contact Tobias Ebert for further information.

Condition: used, Year of construction: 1984, bore capacity in steel (diameter) 32 mm Nedo Aa A E Repfx Akmsdc arm length 1230 mm bore stroke 180 mm total power requirement 3 kW weight of the machine ca. 1,8 t dimensions of the machine ca. 2,2 x 1,8 x2,3 m High-speed radial drilling machines with: - Feed mechanism - Thread-cutting attachment

Condition: used, operating hours: 6,302 h, machine/vehicle number: LLA01169, fuel type: diesel, motor manufacturer: Caterpillar 3512C, General information Year of manufacture: 2008 Field of application: Construction Weights Empty weight: 43.000 kg Functional Generator capacity: 1.421 kVA Njde Aa H Agspfx Akmedc Dimensions of cargo space: 1310 x 300 x 326 cm Other information Fuel consumption: 205 Liter per Hour at 75% Load Generator: Kato AA27675008 Frequency: 60 Voltage: 600 Drill equipment: Control Panel, Steel canopy Production country: US Additional information Please contact Team DPX for more information = Additional options and accessories = - Control Panel - Steel canopy

Condition: used, functionality: fully functional, power: 0.75 kW (1.02 HP), input voltage: 380 V, input frequency: 50 Hz, spindle mount: MK 2, actuation type: electric, overall weight: 150 kg, quill stroke: 120 mm, Equipment: type plate available, Gillardon pillar drilling machine Manufacturer: Maschinenfabrik Wilhelm Gillardon II, Bretten i. Baden According to the information on the attached nameplate, the drilling machine is powered by a motor from VEM Elektromotorenwerke Thurm. Electric motor Three-phase asynchronous motor, type KPER 80 K 4 VEM Motors Thurm GmbH, D Zwickau 3 speed ranges via belt drive. Spindle stroke approx. 120 mm, drilling spindle with Morse taper 2, weight approx. 150 kg / approx. 1380 rpm, MK2 drilling column. Power consumption 0.75 kW - mains connection 380 volts, 50 Hz. Good used condition Nameplate present An inspection of the bench drill while it is powered is possible after prior appointment. Price: negotiable Ndjdpfoh N Svlox Akmoc Our asking price is €290,-- net, ex works, plus packaging costs. All technical data is subject to typographical errors and omissions. Sale exclusively to countries within the EU.

Condition: used, Year of construction: 2008, functionality: fully functional, travel distance X-axis: 6,000 mm, travel distance Y-axis: 650 mm, travel distance Z-axis: 400 mm, spindle speed (min.): 50 rpm, spindle speed (max.): 1,500 rpm, type of input current: three-phase, input voltage: 400 V, Equipment: rotational speed infinitely variable, A used, well-maintained, CNC-controlled drilling and tapping machine with a moving column, equipped for drilling, countersinking, and thread cutting, featuring: Ndodpfx Aksz S Rfdemsc - 7-position tool changer - Micro-spray system - Internal coolant supply - Automatic tool length measurement - 5 pneumatic clamping cylinders - Documentation - Programming guide Drilling capacity in steel ST60: up to a diameter of 40 mm without pre-drilling Thread cutting in ST60: up to M30 Spindle speeds: 50-1500, freely programmable Tool holder: BT40 Travel distances X/Y/Z: 6000/650/400 mm Feeds: 0.01 to 1.5 mm/rev Rapid traverse speed in X/Y/Z: 18/8/5 m/min Technical data and dimensions subject to change.

Condition: used, operating hours: 41,436 h, machine/vehicle number: 1PW00425, fuel type: diesel, motor manufacturer: Caterpillar 3512B, General information Year of manufacture: 2003 Field of application: Construction Weights Empty weight: 43.000 kg Functional Generator capacity: 1.421 kVA Dimensions of cargo space: 1310 x 300 x 326 cm Other information Fuel consumption: 205 Liter per Hour at 75% Load Generator: Kato A210640016 Frequency: 60 Voltage: 600 Drill equipment: Control Panel, Steel canopy Production country: US Additional information Please contact Team DPX for more information = Additional options and accessories = Nsdps Adxyxjfx Akmodc - Control Panel - Steel canopy = Remarks = 1200rpm 1101bkW EPA Tier 1 4 similar sets available! DPX-12673 - serial no. 1PW00422 - 40.072 hrs DPX-12674 - serial no. 1PW00425 - 41.436 hrs DPX-12675 - serial no. 1PW00424 - 39.810 hrs DPX-12676 - serial no. 1PW00423 - 37.590 hrs

Condition: excellent (used), Year of construction: 2012, operating hours: 5,656 h, functionality: fully functional, overall weight: 2,800 kg, fuel type: diesel, color: yellow, axle configuration: 2 axles, empty load weight: 2,800 kg, fuel: diesel, gearing type: hydrostat, number of seats: 1, Equipment: additional headlights, hydraulics, low noise, rubber tracks, An authorized SUBARU dealer in Łaziska Górne has a Vermeer D9x13 Series 2 horizontal directional drilling rig from 2012 for sale, with 5650 operating hours. We specialize in importing and selling these Vermeer and Ditch Witch drilling rigs. The machine is on-site, has been inspected, and is ready for operation. Technical specifications of the Vermeer D9x13 Series 2: Engine: Kubota V1505T Diesel, turbocharged Nodpfszumt Rox Akmedc Engine power: 47 HP / 35 kW Push/pull force: 40 kN / 9000 lbs Maximum torque: 1763 Nm Spindle speed: up to 220 rpm Maximum carriage speed: 42.7 m/min Drilling fluid pump: 34.1 l/min or 56.8 l/min, depending on the version Maximum drilling fluid pressure: 51.7 bar Drilling fluid tank on the machine: 94.6 l Drill rods: Vermeer Firestick, length 1.8 m, diameter 42 mm Machine length: 3.80 m Transport width: 0.90 m Maximum working width: 1.08 m Height: 1.75 m Weight with drill rods: approximately 2860 kg Additionally available: We also have a small Ditch Witch FT5 drilling fluid pump/mixer from 2021, which is a great match for this model and provides a practical set for small and medium-sized drilling projects. Ditch Witch FT5 – key data: Year of manufacture: 2021 Tank capacity: approximately 757 liters / 200 gallons Maximum flow to the drilling rig: approximately 68 l/min Engine: Honda GX160, gasoline Engine power: approximately 5.4 HP Dimensions: approximately 185 × 81 × 136 cm Weight: approximately 182 kg Option to purchase the drilling rig alone or as a set with the Ditch Witch FT5 drilling fluid pump. The stated price is net and applies to export and business customers. A significant discount is possible for individual customers – Please contact us directly by phone to get your best price.

Condition: excellent (used), Year of construction: 2005, functionality: fully functional, type of input current: three-phase, total length: 1,300 mm, total height: 2,000 mm, table width: 255 mm, input voltage: 400 V, total width: 1,350 mm, table length: 800 mm, drilling capacity: 40 mm, Equipment: documentation/manual, SERRMAC TCS 40 TC VR DA Drilling and Milling Machine Square column and prismatic guides. Complete with: Automatic feed. Variable speed with delay. Lubrication system. Nsdpfx Aezkkm Hekmodc Motorized rapid vertical feed for cross slide table. Vise. Drilling capacity in steel: 40 mm diameter. CM 4 spindle connection. Spindle stroke: 145 mm. Cross slide table: 800 x 255 mm. Variable speed with delay: 64-2350 rpm. Motor power: 2.2 kW. Power supply: Three-phase, 400 V. Weight: 780 kg.

Condition: used, Scale: 22 mm Ndedpfx Ajzrxwcekmec Technical data: - Mounting shaft: 5 mm

Condition: new, Drilling capacity in St 60 30 mm threading in St 60 M 16 threading in GG 20 M 20 Short spindle MK 3 bore stroke 140 mm throat 293 mm column diameter 115 mm Machine table - usable table surface 514x360 mm T-Slots Amount - Width - Distance 2 x 14 x 224 mm Distance spindle - machine table min./max. 132/724 mm feed Hand spindle turning speed range 225-4300 UpM total power requirement 1,0/1,6 kW height of the machine 1790 mm Standard equipment: - Mushroom pushbutton (latching) for EMERGENCY STOP - Reversing switch for right-left rotation Nedozz Ainepfx Akmjdc - Motor protection switch - Speed adjustment stepless - Speed display digital - Protection IP 54 - Connector (fully assembled, cable length 2 m) - Spindle protection with electrical protection

Condition: used, Year of construction: 1976, functionality: fully functional, travel distance Y-axis: 3,500 mm, spindle diameter: 125 mm, travel distance W-axis: 800 mm, table load: 20,000 kg, table length: 2,000 mm, table width: 1,800 mm, type of input current: AC, WMW Union BFP 125 - Plate Type Horizontal Boring and Milling Machine, year of construction 1976 German-made heavy-duty plate type horizontal boring mill (Plattenbohrwerk). The complete electrical system has been fully renewed. The machine is well maintained and in full working condition. Technical data: - Spindle diameter: 125 mm - Rotary table: 2000 x 1800 mm, load capacity 20,000 kg - Spindle (quill) travel W: 800 mm - Vertical travel Y: 3500 mm - Floor plate dimensions: 9800 x 3750 mm Nodozz Shmopfx Akmjdc The machine can be inspected under power at our facility in Dilovasi OSB, Kocaeli / Turkey. Price EXW Dilovasi. Loading assistance available.

Condition: excellent (used), Year of construction: 2014, Vertical glass drilling machine, 1500 x 3000 Nedey Nltnspfx Akmedc Max. glass size: 1500 x 3000 mm Glass thickness: 3 – 20 mm Drilling diameter: 3 – 100 mm Control: NC controlled Drilling heads: 2 opposing drilling spindles (front and rear) Spindle speed: Adjustable via inverter Total floor dimensions: 7500 x 2200 x 2800 mm Excellent condition Good working order, tested As is Available immediately

Condition: new, Year of construction: 2026, functionality: fully functional, power: 3 kW (4.08 HP), input voltage: 400 V, input current: 6 A, input frequency: 50 Hz, type of input current: three-phase, tool diameter: 50 mm, spindle mount: MK 5, drilling depth: 250 mm, height adjustment type: mechanical, actuation type: electric, rotational speed (max.): 1,400 rpm, rotational speed (min.): 31 rpm, total width: 800 mm, total length: 1,100 mm, total height: 2,400 mm, throat depth: 335 mm, table width: 480 mm, table length: 560 mm, overall weight: 1,270 kg, Equipment: CE marking, documentation/manual, Special Offer – 5% Discount Available! Column Drilling Machine MTP Z5150B – New Nsdpfx Akszcn A Demodc The MTP Z5150B Column Drilling Machine is a professional industrial machine designed for drilling, reaming, countersinking and tapping operations in steel, cast iron, aluminum, brass, bronze and engineering plastics. Its heavy-duty cast iron construction and machine weight of 1270 kg provide outstanding rigidity, stability and machining accuracy, even when using large-diameter tools. Equipped with a 12-speed mechanical gearbox, automatic spindle feeds and a tapping function, the machine allows the operator to select the ideal cutting parameters for different materials and machining operations. The integrated coolant system further improves machining efficiency and tool life. With a spindle speed range of 31.5–1400 rpm, the MTP Z5150B is suitable for both heavy-duty drilling and precision machining. The large T-slot worktable ensures secure workpiece clamping, while the rigid column construction minimizes vibration for accurate and reliable results. Main Features • Heavy-duty cast iron construction • 12-speed mechanical gearbox • Automatic spindle feeds • Tapping function • Integrated coolant system • Adjustable worktable • High machining accuracy • CE certified Standard Equipment • Mechanical gearbox • Automatic spindle feeds • Tapping function • Integrated coolant system • Adjustable worktable • Safety guard • Emergency stop • Technical documentation • CE Declaration of Conformity Technical Specifications • Model: MTP Z5150B • Machine type: Column drilling machine • Maximum drilling capacity: 50 mm • Spindle taper: MT5 • Quill travel: 250 mm • Motor power: 3 kW • Power supply: 400 V / 50 Hz / 3-phase • Spindle speed: 31.5–1400 rpm • Number of spindle speeds: 12 • Automatic feed: 0.056–1.80 mm/rev • Throat depth: 335 mm • Table size: 560 × 480 mm • Machine weight: 1270 kg • Condition: New • CE certified Applications • Drilling • Reaming • Countersinking • Tapping • Metal fabrication • Tool rooms • Maintenance workshops • Manufacturing plants Suitable Materials • Structural steel • Tool steel • Cast iron • Aluminum • Brass • Bronze • Engineering plastics Transport and Delivery The machine is available from stock and ready for immediate dispatch. We provide professional transport throughout Europe using specialized heavy machinery logistics. Every machine is securely loaded, protected during transport, and delivered directly to the customer's premises. We also assist with export documentation and international shipping arrangements. Worldwide shipping is available upon request. About Metal Technics Polska Metal Technics Polska is a manufacturer and distributor of professional metalworking machinery. We supply high-quality machines throughout Europe and provide expert technical advice, spare parts, and comprehensive after-sales support. Contact us today for pricing, delivery times, machine availability, additional photos, videos, or a personalized quotation.

Condition: excellent (used), Column drilling machine Manufacturer: Ixion Model: BS 30 AV STG Taper: MK 3 Infinitely variable speed: 80 - 1400 rpm Three automatic feeds: 0.1–0.2–0.3 per revolution Thread cutting function Throat: 280 mm Table size: 550 x 400 mm Max. distance: quill to table 750 mm Motor: 380 volt Transport dimensions: Height: 2050 mm with base plate Depth: 1000 mm Width: 560 mm Nedoy I Ug Uspfx Akmedc Weight: 355 kg with pallet

Condition: new, neu ca. 6 Monate ab Auftragse Taiwan 39200 € 748.72 € 50 mm Ndjdpfxjynmt Sj Akmoc MK 5 350 - 1.600 mm 56 - 1.450 (12) U/min Stahl/Guß: M40/M50 2670 mm 1120 mm 2410 mm 3300 kg 465 - 1.420 mm 0,06 - 0,2 (3) mm/min 3.7 kW 320 mm 270 mm 2.550 x 970 x 200 mm 1,5 kW 630 x 500 x 500 mm 2760 mm 0,75 kW left/right rotation automatic feed drilling depth limit manual headstock adjustment with hydraulic clamping electric height adjustment of extension arm andhydraulic clamping hydraulicclamping of swivel movement of extension arm central operation panel on the front side power load readout for drilling spindle hand wheel for spindle fine feed coolant equipment machine lamp box table machine and equipment according to the CE-regulations operating manual in GERMAN and ENGLISH

Condition: excellent (used), Year of construction: 2015, functionality: fully functional, Facom foratrice Through-hole drill f-v3r-2l-3f+2tagr1 used 2015 Brand: Facom foratrice Model: Through-hole drill f-v3r-2l-3f+2tagr1 Description: Through-feed drill F-V3R-2L-3F+2TAGR1 All heads and saws are screw-adjustable with mechanical indicators. Drilling depth is controlled electronically. Minimum workpiece length: 300-350 mm Ndsdpfx Akox Rd Eljmjc Maximum: 2000 mm Automatic feeder Bsbtt Sov U Uw Ujx Nteda Double-sided cutting with angle adjustment Double-sided drilling with angle setting 3 drill heads top + 2 wheels + 2 rear All heads have angle adjustment Electronic position markers I can send a video via WhatsApp The machine is operational and connected; you can test it 2015 Year: 2015

Condition: used, spindle mount: MK 4, drilling depth: 50 mm, rotational speed (max.): 1,460 rpm, overall weight: 2,300 kg, Radial Drill Brand: Foradia Model: GH 50-1000 Serial No.: 5080 Drilling capacity: 50mm Maximum radius: 1,135mm Minimum radius: 425mm Longitudinal head travel: 700mm Column diameter: 250mm Usable arm from column edge: 300mm Vertical arm stroke: 620mm Minimum spindle-to-base distance: 300mm Maximum spindle-to-base distance: 1,145mm Spindle stroke: 225mm Morse taper: 4 Speeds: 12 (35-1460rpm) Automatic feeds: 6 (0.05-0.35) Motor power: 3.5 + 1.5 Hp Weight: 2,300kg Ndsdsymw I Dspfx Akmsc

Condition: used, Year of construction: 2017, gebraucht 2017 3901 China 8490 € 1 6790 € 32 mm MK 4 300 - 1.000 mm 32 - 2.500 (16) U/min 1760 mm 800 mm 2080 mm 1600 kg 530 - 1.000 mm 2.2 kW 240 mm 250 mm 0,75 kW 0,10 - 1,25 (8) mm/U Ndsdpfowiqlpex Akmjc box table 600 x 455 x 455 mm coolant equipment machine lamp mechanical clamping for height adjustment and spindle stock electr. clamping for arm rotation machine and equipment according to the CE-regulations operating manual in GERMAN and ENGLISH BUYING USED MACHINERY IS A MATTER OF TRUST - OUR TRANSPARENCY PROMISE We offer you maximum security and complete transparency. • HONEST INSIGHTS: Detailed photos and functional videos of the current condition • LIVE ON-SITE CHECK: Live testing is possible at our facility • DIGITAL DEMONSTRATION: Individual live demonstration via video call • RISK-FREE PURCHASE: 14-day return policy Details:

Condition: new, neu ca. 8 Wochen ab Auftragse Spanien 16960 € 325.63 € 40 mm Nodpfx Aowiq Htskmodc MK 4 360 mm 61 - 1.169 (9) U/min 2.2 kW M33 550 mm 950 mm 2363 mm 610 kg 0,1 / 0,2 / 0,3 / 0,4 mm/U 200 mm 175 mm 35 - 835 mm 1240 mm 550 x 550 mm 950 x 550 mm ERLO(MADE IN SPAIN) FOR MANUFACTURING USE automatic feed gear drive fixed machine table tiltable turntable front wheel for sensitive fine feed coolant equipment lighting OPTION (PRICE ON REQUEST): Manual tapping system ALTERNATIVE: ERLO B-40 VERSION WITH ELECTROMAGNETIC CLUTCH PRICE ON REQUEST

Condition: new, neu ca. 8 Wochen ab Auftragse Spanien 12570 € 241.34 € 50 mm MK 4 350 mm 93 - 152 - 204 - 298 - 44 U/min 3 kW M35 480 mm 755 mm 2265 mm 435 kg 0,1 / 0,18 / 0,24 mm/U 180 mm 150 mm ERLO (MADE IN SPAIN) FOR DEMANDING WORKSHOP USE Gear drive 3 aut. feeds sliding machine table solid drill head tiltable turntable front wheel for sensitive fine feed (sample photo) OPTIONS (PRICES ON REQUEST): lighting equipment L coolant equipment and machine base with T-slots ERB Nodpfx Aewiq Hyekmedc Reverse for tapping IR/RS