Used Angle Gear for sale (13,322)

Condition: excellent (used), functionality: fully functional,

Condition: excellent (used), Year of construction: 2010, 1. Clamping table, square design, manufactured by AMF, dimensions 600 x 1060 mm, year of manufacture 2010. Ledpfx Aez N S Egolyoah Width 600 mm, height 1060 mm (4 sides). Base plate: 760 mm x 735 mm x 50 mm. Grid hole spacing: 50 mm x 50 mm, thread: M16. New price: €12,000. In very good condition.

Condition: excellent (used), Year of construction: 2016, operating hours: 1,158 h, functionality: fully functional, machine/vehicle number: 16-020, overall weight: 450 kg, total length: 1,360 mm, total width: 800 mm, total height: 1,800 mm, fuel type: electric, volume flow: 33 m³/h, pressure (min.): 330 bar, Equipment: compressor, This offer concerns a beautiful Comptrade CTP-S-550E3 diving compressor. The compressor comes with an external filling panel for diving cylinders (5 x 300 bar and 1 x 200 bar). The lever valves were replaced in 2025/2026. I am also including a 50-liter air cylinder. This is a great set, practically ready to use. You just need to connect the electrical wires to the filling panel, and you can start working immediately!!! PERFORMANCE: 550 liters/min Engine speed: 1250 rpm Dimensions: 136/80 cm (width/depth), 180 cm (height) Weight: 450 kg Rated power: 11 kW RUNNING HOURS: Only 1158 hours I have my own transport available. Price from 96-100 EUR, starting from Skierniewice, Poland, to your location, plus 0.33 EUR per kilometer one way. TECHNICAL DATA OF THE COMPRESSOR Medium: breathing air according to DIN 3188 / EN 12021: 2014 Inlet pressure (bar, absolute pressure): 1 + 0.2 Nominal working overpressure (max. bar): 420 Number of compression stages: 4 Number of cylinders: 4 Diameter of 1st stage cylinder (mm): 130 Diameter of 2nd stage cylinder (mm): 60 Diameter of 3rd stage cylinder (mm): 32 Diameter of 4th stage cylinder (mm): 14 Piston stroke (mm): 50 Interstage overpressures: Laodpoz Rmvcsfx Alyoh 1st stage (approx. bar): 2.5 – 3.5 2nd stage (approx. bar): 15 – 17 3rd stage (approx. bar): 70 – 75 4th stage (approx. bar): 225 – 400 Air-cooled Lubrication: oil pump Oil quantity (l): 3.8 Type of oil: synthetic oil Permissible ambient temperature: +5°C to +45°C Permissible inclination: 5° Frequency of condensate removal: every 10–15 minutes DRIVE MOTOR: three-phase induction motor (E3) 3×400 V / 50 Hz, 2900 rpm, B3 design, IP 55 Equipment: compressor and motor mounted on a frame equipped with vibration damping elements; the lightweight frame design allows for easy replacement of the drive unit. micron-type inlet filter forced lubrication (oil pump) interstage coolers, final cooler, final mechanical separator for removing oil-water condensate visual oil level indicator on the compressor block final safety valve (set at 225 bar or 330 bar), check valve, thermal motor protection switch, automatic star-delta starting system FILLING PANEL WITH SIX OUTLETS (5 x 300 OR 1 x 200 BAR) AUTOMATIC SHUT-OFF SYSTEM (AUTO-STOP) AUTOMATIC CONDENSATE DRAIN SYSTEM removal of condensate from all interstage separators and the final separator during compressor operation integrated pressure relief starting system (automatic drain upon each device shutdown) condensate tank with a capacity of approximately 5 liters noise dampers, timer to optimize the frequency of condensate draining FILTRATION SYSTEM F 2400 transparent COMP TRADE filter cartridge with extended life and saturation indicator; three-stage filtration (drying, neutralization, microfiltration) air quality in accordance with DIN 3188 / EN 12021: 2014 standards filling: MS-AC-MS (ensures air quality in accordance with DIN 3188 / EN 12021: 2014) filter capacity (air volume): 2400 m³ (at an ambient temperature of 20°C) COMPTROL 1 oil level control system with automatic shut-off function and reset button (activation when the minimum oil level is reached in the compressor block); oil level indicator located at the front of the frame. COMPTROL 2 temperature control system with automatic shut-off function and reset button (activation when the maximum temperature is reached in the last stage of compression)

Condition: good (used), I am selling this machine, equipped, already disconnected, stored in stock. Video of the machine can be sent. max. wheel diameter 710 mm Ledstuipmjpfx Alyoah max. module 10 Spindle speed : 700-2800 1/ min. Machine weight : 13,500 kg

Condition: refurbished (used), Year of construction: 2025, machine/vehicle number: C15_20250011, functionality: fully functional, operating hours: 300 h, pressing force: 44 t, stroke length: 270 mm, operating speed: 100 mm/s, reverse speed: 100 mm/s, overall weight: 2,800 kg, year of last overhaul: 2026, Equipment: CE marking, angle measuring system, documentation/manual, safety light barrier, Electric Press Brake C15 - IRIS+ Angle Measuring System CoastOne - Made in Finland Year of manufacture: 2025 - Project machine Press force: 44T Bending length: 1600mm Spindles: 2 x 22T Control: TC15-2D graphic Light barrier: Lazersafe IRIS+ angle measuring system Backgauge: 5-axis controlled X-R-Z1-Z2-Dx axes Tool holder: Manual type WILA / TRUMPF / Type B Light working area front and rear Front support table - height adjustable Dual foot pedal for opening and closing the Y-axis 1 set of press brake tools included 36-month warranty after installation Delivery extra; immediately available Viewing under power possible at any time by appointment! Ledoz Rvy Dopfx Alyeah

Condition: used, Year of construction: 2008, max. wheel diameter 700 mm max. module 10 (18) min. module 1 table diameter 530 mm Table speed max. 350 1/min Distance of shafts 50 - 680 0 workpiece weight 4.000 kg Axial travel 1.000 mm tangential adjustment 300 mm pivoting angle + / - 45 Grad power capacity 32 kW spindle turning speed range 3.500 - 12.000 U/min tool diameter 320 mm total power requirement 80 kW Laedpfx Aljyv Ipfsyjh weight of the machine ca. 25,00 t

Condition: used, operating hours: 19,000 h, gearing type: automatic, color: other, Year of manufacture: Aug 2017 Year of construction: 2017 Axle 1: left 5 mm right 5 mm Axle 2: left 18 18 mm right 18 18 mm Lodpfx Aezu Rt Ujlyjah Axle 3: left mm right mm

Condition: used, Year of construction: 2003, Rausch Gratomat MS150/3-800 Multi-Spindle Deburring Machine Ledpfx Aez Stwvjlysah 20-800mm workpiece diameter 150mm maximum vertcal working stroke 150mm maximum gear face width 1-8 modul range compatibility 4 number of grinding spindles 26,000rpm grinding spindle speed

Condition: used, Year of construction: 2015, overall weight: 16,000 kg, total height: 2,200 mm, total length: 4,410 mm, total width: 2,600 mm, GROB C6-A – Cold Rolling Machine Technical Data: Gear Module: up to approx. 2.3 Gear Diameter: approx. 8–80 mm Max. Clamping Diameter: approx. 315 mm Lajdpfez E Ra Hex Alyoh Power: 25 kW Weight approx.: 16,000 kg Dimensions (LxWxH) approx.: 4410 x 2600 x 2200 mm Year of construction: 2,015 Terms of payment: 100% prepayment before pick-up Terms of delivery: From foundation under power: No

Condition: repair required (used), Year of construction: 1987, functionality: unexamined, Max. diameter with counter support: 1450 mm Max. diameter without counter support: 2100 mm Lajdpfjz Df A Tox Alyoh Diameter of the clamping table: 1800 mm Total weight: 38 tons The clamping table has been disassembled and overhauled.

Condition: excellent (used), I am selling this machine, connected, can be tested. Max. workpiece diameter ..... 1600 mm Module ..... 16 - Power of the main electric motor ..... 12 kW Dimensions l x w x h ..... 4300 x 2000 x 3170 mm Machine weight ..... 18500 kg Lsdpjv Nqppefx Alyoah Can send a video of the machine, via whatsapp.

Condition: used, Year of construction: 2023, max. wheel diameter 200 mm gear width 60 mm max. module 5 min. module 2 workpiece weight max. 6,0 kg total power requirement 4 kVA weight of the machine ca. 0,5 t dimensions 1,35 x 1,55 x 1,7 m Less used Gear deburing machine - 3-jaw chuck ZG 125 Ledozy Satspfx Alysah - One twist in 5- 120 sec. - After test maybe modil 1,25 possible - Working Unit 1, milling function - Working Unit 2, brush function - dust collector - automatic mode

Condition: used, operating hours: 28,191 h, gearing type: automatic, color: other, Year of manufacture: Apr 2012 Year of construction: 2012 Axle 1: left 8 mm right 8 mm Axle 2: left 10 mm right 10 mm Axle 3: left mm right mm Lajdpoy Engcefx Alyoh

Condition: like new (used), functionality: fully functional, Very good condition, the machines looks like new. Angle sealing machine and shrink tunnel Manufacturer: AVC Sealing Solutions Lsdpfjz Dwl Hex Alyjah Angle sealing machine, type HS-500 Sealing strip: 500 x 600 mm Machine dimensions: 1780 x 1020 x 1120 Shrink tunnel, Type 1000 Tunnel opening: 440 x 300 mm Shrink length: 1000 mm Machine dimensions: 1800 x 1100 x 1600 Maximum heating power: 11 kW

Condition: used, Year of construction: 2004, Technical details: Laedpfxovi Nins Alyeh max. wheel diameter: 130 mm gear width: 25 mm module max. : 3 module min. : 0,5 control: Siemens 840D work-spindle diameter: 85 mm strokes - infinitely variable: 500 - 2500 Hub/min stroke: 30 mm total power requirement: 48 kVA weight of the machine ca.: 11,5 t space requirements approx. LxWxH: 4,7 x 3,0 x 3,3 m Equipment: -Counterholder with tip -chip conveyor -hydraulically operated counterholder arm and linear guides i.D. *

Year of construction: 1990, condition: excellent (used), functionality: fully functional, hydrostatic gear box suitable for BIHLER RM 40, tested. Laodpfx Aez S T Tdolyeh

Condition: excellent (used), Year of construction: 1978, Gear hobbing machine WMW MODUL ZFWZ 2000/3 Max. diameter with tailstock: 1450mm Max. diameter without tailstock: 2100mm Max. module: 30 Lajdpfxozt Iu Tj Alyeh

Condition: used, operating hours: 21,822 h, gearing type: automatic, color: other, Year of manufacture: Aug 2015 Year of construction: 2015 Axle 1: left 22 mm right 22 mm Axle 2: left 26 -26 mm right 26-26 mm Ljdpfx Ajzvfyfjlyoah Axle 3: left mm right mm

Condition: used, Year of construction: 1983, max. wheel diameter 1500 mm gear width 550 mm max. module 25 min. module 2 workpiece weight max. 6000 kg max. number of teeth 432 Ledpfeyq Szasx Alyjah min. number of teeth 12 table diameter 990 mm grinding wheel size 400 mm total power requirement 75 kW weight of the machine ca. 20,5 t With tailstock max. wheel dia. 1250mm, without tailstock 1500mm The tech. Data are manufacturer or operator information and therefore non- binding. We reserve the right to prior sale; Our terms and conditions of sale apply exclusively. About us More than 400 of our own machines in stock Over 15,000 m² of storage space, 70 t crane capacity More than 10,000 items and accessories for your workshop If you are interested in selling machines, production lines, or your business, please contact us. You can find further offers on our website. Tours are possible by appointment. We look forward to your visit. Your Markus Hirsch Team

Condition: used, functionality: fully functional, Maximum working diameter: 2100 mm Table size: 1800 mm Minimum diameter: 200 mm Maximum number of teeth: 45 Laodpfx Aeylprfelysh Max. module: 20 Weight: 40 tons

Condition: used, Pair of cast iron angle plates Laedpfx Alsz H I Abeysh Height: 3000 mm Width: 1000 mm Depth: 1245 mm Weight: 3 T / unit

Condition: used, Pair of cast iron angle plates Width: 1000 mm Height: 2075 mm Depth: 700 mm Unit weight: 1 T Lodpjz H I A Iefx Alyoah

Condition: used, operating hours: 27,315 h, gearing type: automatic, color: other, Year of manufacture: Apr 2012 Year of construction: 2012 Axle 1: left 10 mm right 10 mm Axle 2: left 12 12 mm right 12 12 mm Axle 3: left mm right mm Lodpfxszvax Ae Alyjah

Condition: used, Universal   Shaker angle adapters / adapter devices   Universal shaker accessories Heavy-duty aluminum angle adapters, clamping devices, and adapter elements for vibration testing systems, vibration tests, and special applications   For sale is a used accessory set for an electrodynamic shaker or vibration testing system.   The set consists of various heavy-duty aluminum angle adapters, adapter plates, clamping devices, clamping blocks, and other accessories. Ideal for test specimen mounting, special designs, and vibration tests.   Technical data: Lasdpfjzpx Ucjx Alyeh   Manufacturer: unknown Type: Accessory set for electrodynamic shaker / vibration testing system Material: predominantly aluminum Design: angle adapters, adapter plates, clamping devices, and fasteners   Components: Several heavy-duty angle adapters Adapter plates of various sizes Clamping and tightening devices Clamping blocks and adapter elements Fastening materials and other accessories as shown in the pictures   Features:   Heavy-duty aluminum construction Threaded and clearance holes Universally applicable Angle adapters for test specimen mounting Adapter plates Clamping and tightening devices Accessories as shown in the pictures   Application areas:   Electrodynamic shakers Vibration testing systems Vibration testing Material testing Environmental simulation Research and development Automotive industry Test specimen mounting and special designs   Scope of supply:   Complete accessory set as shown in the pictures Angle adapters Adapter plates Clamping devices Clamping blocks Fastening materials Other accessories as shown in the pictures   Weight: 600 kg   Condition:   Used Visual condition as shown in the pictures. Normal signs of wear and tear, scratches, and pressure marks are present.   Only the accessories shown in the pictures are sold.   The table shown in the pictures or other items not explicitly mentioned are not included in the sale.   Shipping on a pallet or collection is possible. Subject to changes, errors, and prior sale.   We will be happy to answer any further questions by telephone.

Condition: used, Year of construction: 1983, max. wheel diameter 80 / 124 mm gear width 150 mm max. module 2 min. module 0,3 turning speeds 210 - 1680 U/min min. number of teeth 6 Lajdpoz Dk Afsfx Alysh total power requirement 2,2 kW weight of the machine ca. 2,4 t dimensions of the machine ca. 2,0 x 1,5 x 1,8 m Top condition.