Used Arburg 270 M for sale (349)

Condition: excellent (used), Year of construction: 2001, Arburg 320C 600-250 / machine in very good technical condition Year of manufacture: 2001 injection unit: Screw diameter: 35 mm injection weight: 121 g Injection pressure: 1820 bar Metering volume: 144 ccm Clamping unit: clamping force: 60 t tie bar distance: 320x320 mm size of clamping platens: 446x446 mm ejector: hydraulic clamping unit: hydraulic Control system: SELOGICA Additional equipment: Very good technical condition Machine has produced molded parts for medical industry - pure production conditions Core pull control Injection unit hardened - bimetal Built-in sorting flap Gedpfex Ng Iaex Ah Hstt Dimensions: Weight: 2330 kg Length/width/height: 3.65x1.48x1.99 m Drive: Pumps/motor: 15 kW Heating power: 6,5 kW Total power: 21,5 kW All offered machines are started by our service technicians before sale. It is possible to get a video of technical tests of the selected machine or participate in live technical tests in our company in Łódź. Price: Upon request

Condition: excellent (used), Year of construction: 2005, Arburg 720 S 3200-2100 Injection Moulding Machine Year of manufacture: 2005 The machine is in very good technical condition, fully operational and ready for immediate use in an industrial facility. The clamping force was factory-upgraded by Arburg to 3600 kN; the machine has received factory servicing. Clamping unit Clamping force: 3,600 kN Platen dimensions (H × W): 1,040 × 1,040 mm Tie bar spacing (H × W): 720 × 720 mm Minimum mould height: 300 mm Maximum daylight opening: 1,400 mm Gedpfxsx Thw Ro Ah Hstt Injection unit Screw diameter: 70 mm Shot volume: 1,078 cm³ Shot weight: 984 g Injection pressure: 2,000 bar Electrical–hydraulic equipment Pump motor rated power: 55 kW Heater power: 30.3 kW Dimensions and weight Net weight with control cabinet: 17 t

Condition: excellent (used), Year of construction: 2001, clamping force: 250 kN, screw diameter: 18 mm, displacement volume: 20 cm³, injection pressure: 2,500 bar, injection weight: 18 g, General information Year of manufacture: 2001 Control system: Selogica Weight: 2,000 kg Dimensions (L × W × H): 2.9 × 0.9 × 1.9 m Clamping unit Clamping force: 25 t Tool clamping system: 250 / … Plate dimensions: 400 × 400 mm Clearance between tie bars: 220 × 220 mm Maximum distance between plates: 425 mm Injection unit Injection unit: … / 60 Screw diameter: 18 mm Screw L/D ratio: 24.5 Specific injection pressure: 2,500 bar Injection volume: 20 ccm Shot weight: 18 g Ejector Gtsdpfx Ahex Tfuyo Hjt Ejector force: 18 kN Ejector stroke: 95 mm

Condition: refurbished (used), operating hours: 22,000 h, In our stock in Wellingborough, Northamptonshire is this fully refurbished Arburg 420C 1000 – 250 VU injection moulding machine with vertical clamp and injection. Ideal for insert moulding as an operator can easily and ergonomically load inserts. The vertical clamp means inserts are more likely to stay in place. This machine has a 30mm plasticising unit which gives a maximum shot weight of 89 (PS) (g). As you’d expect from us, this machine has been fully refurbished and is now completely fault & leak free. With low lifetime hours of only 23k, it really is in excellent condition throughout. The plasticising unit is holding max pressure throughout the range, the pump is quiet, the platens are in great order and we’ve done great work with the general cosmetics. Gedel Tnz Eopfx Ah Hett Machine is now available for a full demonstration as and when required. Refurbished machines undergo a comprehensive test procedure during which every function of the machine is tested and if necessary repaired. A production run of at least 5000 fault free cycles prior to sign off ensures trouble free operation once delivered. Machines are ultra clean and cosmetically as good as we can get them. We guarantee our refurbs are delivered fault free and leak free with a 3 month (parts only) warranty. Prices shown are ex-works, but we can quickly provide DAP (Delivered at Place) Incoterm pricing on request. We can take out the hassle and additional costs of purchasing machinery within the UK and EU. Contact us with a potential delivery address and we'll do the rest.

Condition: excellent (used), Year of construction: 2013, operating hours: 22,420 h, functionality: fully functional, clamping force: 1,000 kN, screw diameter: 20 mm, displacement volume: 31 cm³, ejector force: 25,000 N, ejector stroke: 175 mm, total length: 4,200 mm, total width: 2,100 mm, overall weight: 4,300 kg, type of input current: three-phase, input voltage: 400 V, turntable diameter: 1,200 mm, Equipment: documentation/manual, During the inspection, it was determined that the cylinder no longer met our quality standards. This means that you have the choice between a 25, 30, or 35 mm unit. This will be purchased individually for you and is included into our offered machine price. warehouse no.: 503459 manufacturer: ARBURG type: Allrounder 1200 T 1000-170 controller: Selogica year of construction: 2013 operation hours: 22420 h technical data clamping unit clamping force: 1000 kN min. mould height: 400 mm max. open daylight: 700 mm opening stroke: 300 mm round table diameter: 1200 mm equipment included 3x control for hotrunner screen text german Gtedpfx Ahox Rx Eys Hot CEE-socket 16A complact flash drive rotary table freely programmable inputs (2) and outputs (2) machine with material hopper machine incl. water flow regulator Hydraulically actuated needle shut-off-nozzle interface EUROMAP 67 Servomotor pump drive Energy-saving drive wear-resistant injection unit measures of machine l x w x h: 4.2m x 2.1m x 0m total weight: 4300KG

Condition: excellent (used), Year of construction: 2018, Clamping force: 200 t Screw diameter: 55 mm Shot weight: 434 g Distance between tie bars V: 570 mm Distance between tie bars H: 570 mm Shot volume: 474 cm3 Platen dimensions : 795 x 795 mm Working hours: 25.969 h Type: Horizontal Drive: Hydraulic Equipment: 1x core puller Gtjdpfx Aox Ir Ngjh Hjt Euromap 67

Condition: excellent (used), Year of construction: 1995, Arburg 370C 600-100 Year of construction: 1995 Injection unit: Screw diameter: 30 mm Gedpfx Ahex Ng H Ao Hett Injection weight: 59 g Injection pressure: 1550 bar Dosing volume: 70 ccm Clamping unit: Clamping force: 60 t Distance between tie bars: 370x370 mm Size of the clamping platens: 570x570 mm Ejector: hydraulic Clamping unit: hydraulic Control system: DIALOGICA Additional equipment: Air valve x 1 Hydraulic core pull x 2 Dimensions: Weight: 3600 kg Length/width/height: 4.30x1.59x2.08 m Drive: Pumps/motor: 11 kW Heating output: 4.2 kW Total output: 15.2 kW All offered machines are started by our service technicians before sale. It is possible to obtain a video of the technical tests of the selected machine or participate in live technical tests at our company in Łódź. Price: On request

Condition: good (used), Control, circuit boards, spare parts for Arburg, injection molding machines Gtjdpob A Suiefx Ah Het -Type: ARB 389 D KPL -Weight: 0.5 kg

Condition: excellent (used), Year of construction: 2012, ARBURG A 375 V 500-170 Turntable (S&P 3773) Manufacture year: 2012 Operating hours: 36,900 Stunden Screw: 25 HVF mm Injection pressure: 2500 bar Stroke volume: 59 cm³ Clamping Force: 50 t Mould installation height min.: 170 mm Plate distance max.: 520 mm Dimensions: 3300 x 1700 x 2100 mm Eeight: 3740 kg Connected load: 11 + 11 = 22 kW Vertical injectionmoldingmachine with a 900mm turntable, 2 station 180°, incl. Option for horizontal injection into parting line incl. lifting table, Robot Interface EM67, Airvalve, EM73, Hotrunner etc...price when new approx. 170.000,- Euro Price: on request contact: Mr. Ralf Schulz Gtedpfx Ahjx Up Ado Hjt

Condition: excellent (used), Year of construction: 2003, functionality: fully functional, machine/vehicle number: 192480, clamping force: 600 kN, overall weight: 2,930 kg, heating capacity: 4.9 kW (6.66 HP), pump power: 11,000 W, For sale is an Arburg Allrounder 370 C 600-100 injection moulding machine. The machine is in well-maintained, fully functional condition. Optional accessories are negotiable. Godpfx Ajx Uth Djh Hjtt

Condition: excellent (used), Year of construction: 2015, Clamping unit: 50 tons Oppening stroke (max. kN/mm) : 30 / 250 Mould height (fixed/variable) min.-max. mm: ---/172/272 Platen daylight (fixed/variable) max. mm: ---/422-522 Shuttle table stroke: 650 mm Screw diameter: 20 mm Injection volume: 31 cm3 Gtodpfxsx H Nu Rs Ah Hst Shot weight: 29 g Injection pressure: 2500 bar Working hours: 7600 hours 1 x hydraulic core 1 x pneumatic core 6 x hot runners

Condition: excellent (used), Year of construction: 2010, Arburg 370S 500-70 Year of manufacture: 08.2010 Injection unit: Screw diameter: 25 mm Shot weight: 40 g Injection pressure: 1550 bar Dosage volume: 44 cc Clamping unit: Clamping force: 50 t Tie bar spacing: 370x370 mm Platen size: 510x510 mm Ejector: hydraulic Clamping unit: hydraulic Control system: SELOGICA - touchscreen Additional equipment: Euromap 67 interface Robot interface Air valve x 8 Gedex Ng Hvjpfx Ah Hott Hydraulic core pull x 1 Control for hot runner x 6 Injection unit hardened - bimetal Option to adjust vertical injection unit via special brackets Screw diameter can be changed to 22, 25, or 30 mm Dimensions: Weight: 3170 kg Length/Width/Height: 3.48x1.46x2.03 m All offered machines are started up and tested by our service technicians before sale. It is possible to receive a video of the technical tests for the selected machine or to participate in live technical tests at our facility in Łódź. Price: On request

Condition: excellent (used), Year of construction: 2014, ARBURG A 1500 T 1600-400 rotary table (29.279 h) (S&P 3786) Manufacture year: 2014 Gtodpfx Ahex Upzys Hjt Operating hours: 29,379 Stunden Screw: 35 mm Injection pressure: 2500 bar Stroke volume: 154 cm³ Clamping Force: 150 t Tie bar distance: 1500 mm Mould installation height min.: 400 mm Plate distance max.: 700 mm Dimensions: 4600 x 1900 x 2300 mm Eeight: 11000 kg Connected load: 22 kW 1500mm Table-diameter, 2-station (180°) turntable, 4 x Corepuller, Airvalve, Interface Colorizing, Interface Robot etc... Price: on request contact: Mr. Ralf Schulz

Condition: excellent (used), Year of construction: 2003, functionality: fully functional, machine/vehicle number: 190958, clamping force: 600 kN, overall weight: 2,930 kg, heating capacity: 4.9 kW (6.66 HP), pump power: 11,000 W, For sale: Arburg Allrounder 370C 600-100 injection moulding machine. The machine is in a well-maintained, fully functional condition. Optional accessories are negotiable. Gsdpjx Utggsfx Ah Hott

Condition: excellent (used), Year of construction: 2004, Arburg 320C 500-250 Year of manufacture: 2004 Injection unit: Screw diameter: 35 mm Shot weight: 121 g Injection pressure: 1,820 bar Shot volume: 144 cc Clamping unit: Clamping force: 50 t Tie bar spacing: 320x320 mm Platen size: 446x446 mm Ejector: hydraulic Clamping unit: hydraulic Control system: SELOGICA Gtsdpfx Aex Ng Hpoh Hst Additional equipment: Euromap 12 Robot interface Air valve x 1 Hydraulic core pull x 1 Injection unit hardened – bimetallic Dimensions: Weight: 2,330 kg Length/Width/Height: 3.41x1.47x1.99 m Drive: Pump/motor: 15 kW Heating capacity: 6.5 kW Total power: 21.5 kW All machines offered are started up by our service technicians prior to sale. It is possible to receive a video of the technical tests of the selected machine or to participate in live technical tests at our facility in Łódź. Price: On request

Condition: excellent (used), Year of construction: 2008, ARBURG A 520 A 1500-400 ALLDRIVE (36.061 h) incl. KUKA Robot (S&P 3788) Manufacture year: 2008 Operating hours: 36,061 Stunden Screw: 40 HVF mm Injection pressure: 2000 bar Stroke volume: 201 cm³ Gedpox Upztsfx Ah Hjtt Clamping Force: 150 t Tie bar distance: 520 x 520 mm Mould installation height min.: 250 mm Plate distance max.: 1000 mm Dimensions: 5100 x 1600 x 2700 mm Eeight: 7250 kg Connected load: 60 kW Accumulator, 4 x Corepuller, Robot Interface EM67, Airvalve, incl. KUKA Robot System KR 5 arc, Convejorbelt, Safety Gate etc... Price: on request contact: Mr. Ralf Schulz

Condition: excellent (used), Year of construction: 2003, Arburg 320S 500-60 Year of manufacture: 2003 Injection Unit: Screw diameter: 18 mm Shot weight: 18 g Injection pressure: 2500 bar Dosage volume: 20 ccm Clamping Unit: Clamping force: 50 t Tie bar spacing: 320x320 mm Platen size: 446x446 mm Ejector: hydraulic Clamping system: hydraulic Control: SELOGICA Additional Equipment: Euromap 12 Robot interface Air valve x 1 Controller with 6 hot runner zones Hardened injection unit - bimetallic Dimensions: Weight: 2,350 kg Gtjdpfx Ajx Ng Hish Het Length/Width/Height: 3.32x1.24x1.81 m Drive: Pump/Motor: 11 kW Heating capacity: 4 kW Total power: 15 kW All machines offered are started and tested by our service technicians before sale. It is possible to receive a video of the technical tests of the selected machine or to participate in live technical tests at our company in Łódź. Price: On request

Condition: excellent (used), Year of construction: 2004, Arburg 320C 500-100 / Excellent technical condition Year of construction: 10.2004 Injection unit: Screw diameter: 25 mm Injection weight: 45 g Injection pressure: 2000 bar Metering volume: 49 ccm Clamping unit: Clamping force: 50 t Distance between tie bars: 320x320 mm Size of the clamping platens: 446x446 mm Ejector: hydraulic Clamping unit: hydraulic Control system: SELOGICA Additional equipment: The machine is in excellent technical condition and was used for testing injection molds Operating hours: 25,739 h in automatic mode Total number of operating hours: 30,661 h Hydraulic core pull x 1 Reinforced injection units - bimetal Proportional valve on the injection unit - precise injection Built-in pressure quality control system from the Sensor Kistler brand - mold pressure measurement It is possible to change the screw diameter to smaller or larger: 20 mm or 30 mm Dimensions Weight: 2300 kg Length/width/height: 3.18x1.47x1.99 m Drive: Pump/motor: 15 kW Heating output: 4.9 kW Total output: 19.9 kW All offered machines are started by our service technicians before sale. It is possible to obtain a video of the technical tests of the selected machine or participate in live technical tests at our company in Łódź. Gtodjx Ng Hcepfx Ah Hot Price: On request

Condition: excellent (used), Year of construction: 2011, Arburg 320C 500-170 Year of construction: 2011 Injection unit: Screw diameter: 35 mm Injection weight: 105 g Injection pressure: 1470 bar Metering volume: 115 ccm Clamping unit: Clamping force: 50 t Distance between tie bars: 320x320 mm Size of the clamping platens: 446x446 mm Ejector: hydraulic Clamping unit: hydraulic Control system: SELOGICA touchscreen Additional equipment: Operating hours: approx. 35,000 h in automatic mode Control system with air valve Core pull control Hardened injection unit - bimetal Proportional valve on the injection unit - precise injection Original Demag mold crane: chain, electrically controlled, 2 lifting speeds Dimensions: Weight: 2310 kg Length/width/height: 3.41x1.47x1.99 m Drive: Pumps/motor: 11 kW Heating output: 9.4 kW Total output: 20.4 kW Gsdpfxsx Ng E Ej Ah Hjtt All offered machines are started by our service technicians before sale. It is possible to obtain a video of the technical tests of the selected machine or participate in live technical tests at our company in Łódź. Price: On request

Condition: excellent (used), Year of construction: 2005, Arburg 270C 500-100 Year of manufacture: 1998 injection unit: Screw diameter: 20 mm injection weight: 26 g Injection pressure: 2500 bar Metering volume: 31 ccm Clamping unit : clamping force: 50 t tie bar distance: 270x270 mm size of clamping platens: 446x446 mm Ejector: hydraulic clamping unit: hydraulic Control system: SELOGICA Additional equipment: Operating hours: approx. 50,000 h Euromap 12 Robot interface Hydraulic core pull x 1 Control system with hot runners Injection unit hardened - bimetal The machine has an additional control panel - control by remote control The machine has been regularly serviced by the authorized service Arburg Dimensions: Weight: 2200 kg Length/width/height: 3.42x1.48x1.99 m Drive: Pumps/motor: 15 kW Heating power: 6,3 kW Total power: 21,3 kW All offered machines are started by our service technicians before sale. It is possible to get a video of technical tests of the selected machine or participate in live technical tests in our company in Łódź. Price: Upon request Gedpfx Asx Ng Exjh Hett

Condition: excellent (used), Year of construction: 2006, Arburg 320C 500-170 with the Wittmann W811 robot Year of construction: 12/2006 Injection unit: Screw diameter: 30 mm Injection weight: 77 g Injection pressure: 2000 bar Dosing volume: 85 ccm Clamping unit: Clamping force: 50 t Distance between tie bars: 320x320 mm Size of the clamping platens: 446x446 mm Ejector: hydraulic Clamping unit: hydraulic Control system: SELOGICA touchscreen Additional equipment: Euromap 67 Robot interface Air valve x 1 Hydraulic core pull x 1 Hardened injection unit - bimetal Proportional valve on the injection unit - precise injection Built-in sorting flap Robot Wittmann W811 Gsdpfxjx Ng Ere Ah Hstt Year of construction: 2010 4-axis robot: 3 axes are driven by servomotors (electric); axis C - pneumatic Travel in axes: X-420, Y-1200, Z-1500 Touch control panel The safety package for robots Robot with adapter, protective housing Purchase of the robot for an additional charge Dimensions Weight: 2400 kg Length/width/height: 3.41x1.47x1.99 m Drive: Pumps/motor: 11 kW Heating output: 9.4 kW Total output: 20.4 kW All offered machines are started by our service technicians before sale. It is possible to obtain a video of the technical tests of the selected machine or participate in live technical tests at our company in Łódź. Price: On request

Condition: excellent (used), Year of construction: 2012, Arburg 680CB 400-170 / Vertical injection molding machine, tie-bar-less / Very good technical condition. Year of manufacture: 2012 Injection unit: Screw diameter: 25 mm injection weight: 54 g Injection pressure: 2500 bar Metering volume: 59 ccm Clamping unit : clamping force: 40 t Gtodpox Ng Dhofx Ah Hot tie bar distance: 0x0 mm Ejector: hydraulic Clamping unit: hydraulic Control system: SELOGICA - touch screen Additional equipment: Very good technical condition Vertical injection molding machine, tie-bar-less Euromap 67 Robot interface Air valve x 3 Hydraulic core puller x 3 Hot runner control x 12 Injection unit hardened - bimetal Proportional valve on the injection unit - precise injection It is possible to change the screw diameter The machine has been regularly serviced by the authorized service Arburg Original Arburg mold crane Dimensions: Weight: 6500 kg Length/width/height: 1.97x1.69x3.40 m All offered machines are started by our service technicians before sale. It is possible to get a video of technical tests of the selected machine or participate in live technical tests in our company in Łódź. Price: Upon request

Condition: excellent (used), Year of construction: 2008, Arburg OK-C S350-60 / Vertical injection molding machine with sliding table / Very good technical condition Year of manufacture: 2008 injection unit: screw diameter: 18 mm injection weight: 18 g injection pressure: 2500 bar Dosing volume: 20 ccm Clamping unit: Clamping force: 35 t tie bar distance: 0x0 mm size of clamping platens: 295x395 mm ejector: hydraulic clamping unit: hydraulic Control system: SELOGICA - touch screen Additional equipment: Vertical injection molding machine with sliding table 3 stations on the sliding table Air valve x 4 Hydraulic core pull x 1 Control system with hot runners Injection unit hardened - bimetal Parallel movements Infrared protection curtains Gsdpfxox Ng A Rs Ah Hjtt It is possible to change the screw diameter Dimensions: Weight: 2500 kg Length/width/height: 2.55x1.85x3.52 m All offered machines are started by our service technicians before sale. It is possible to get a video of technical tests of the selected machine or participate in live technical tests in our company in Łódź. Price: Upon request

Condition: excellent (used), Year of construction: 1999, Arburg 221KS 250-75 / Universal machine Year of manufacture: 1999 injection unit: Screw diameter: 20 mm injection weight: 26 g Injection pressure: 2350 bar Metering volume: 31 ccm Clamping unit: Clamping force: 25 t tie bar distance: 221 mm size of clamping platens: 342x250 mm ejector: hydraulic clamping unit: toggle lever Control system: SELOGICA Additional equipment: Universal machine - injection unit can run both vertically and horizontally Control with air valve Core pull control injection unit hardened - bimetal Clamp for fixing the injection unit vertical Dimensions: Weight: 1150 kg Length/width/height: 2.63x1.34x1.93 m Drive: Pump/motor: 5.5 kW Heating power: 4,6 kW Total power: 10,1 kW Gedpfx Ahsx Ng A De Hstt All offered machines are started by our service technicians before sale. It is possible to get a video of technical tests of the selected machine or participate in live technical tests in our company in Łódź. Price: Upon request

Condition: excellent (used), Year of construction: 1997, Arburg 220M 350-90 Year of manufacture: 1997 Injection unit: Screw diameter: 25 mm Shot weight: 41 g Injection pressure: 1860 bar Dosage volume: 49 ccm Clamping unit: Clamping force: 35 t Tie bar distance: 221x221 mm Platen size: 346x346 mm Ejector: hydraulic Clamping unit: hydraulic Control system: MULTRONICA Additional equipment: Perfect technical condition Operating hours: 19,000 h Gtodpfx Aox Ng Awjh Hjt The machine was used by a company producing packaging for the food industry Dimensions: Weight: 1,620 kg Length/Width/Height: 3.30x1.70x1.94 m Drive: Pump/Motor: 11 kW Heating capacity: 4.6 kW Total power: 15.6 kW All machines offered are started and tested by our service technicians prior to sale. It is possible to receive a video of the technical tests of the selected machine or participate in a live technical test at our facility in Łódź. Price: On request