Used Arburg A 221 75 350 Art 617 for sale (349)

Condition: excellent (used), Year of construction: 2004, Clamping force: 25/35 tons Opening stroke: 200 mm Mould height: 150-300 mm Clamping platen daylight: 350-500 mm Tie bar daylight: 221 mm Mould clamping plattens (b x h) : 342 x 250 mm Ejector stroke: 60 mm Screw diameter: 25 mm Giedpfxouykh De Ah Hol Screw stroke: 100 mm Injection volume: 70 cm3 Shot weight: 59 g Injection pressure: 1040 bar Working hours: 34.748

Condition: excellent (used), Year of construction: 2003, Arburg 221 K 350 - 100 injection molding machine Year of manufacture: 12/2003 Horizontal/vertical machine - stand-up unit Control type: Selogica Closing system: Knee TECHNICAL DATA Gisdswa R T Iepfx Ah Hol Closing force: 350 kN Clearance between columns: 221 mm Plate dimensions: 324 mm x 250 mm Mould size: min 150 mm - 300 mm Maximum opening stroke: 200 mm Max distance between plates: 350 mm - 500 mm Screw diameter: 20 mm Injection volume / Injection weight: 31 ccm / 26 grams PS Injection pressure: 2400 bar GENERAL DATA Engine: 7.5 kW Heaters: 3.5 kW Operating hours: approx. 47,000 h Dimensions L x W x H: 2.7 m x 1.4 m x 1.7 m Weight: 1150 kg

Condition: excellent (used), Year of construction: 1999, Arburg 221KS 250-75 / Universal machine Year of manufacture: 1999 Godjx Ng A Depfx Ah Hjil injection unit: Screw diameter: 20 mm injection weight: 26 g Injection pressure: 2350 bar Metering volume: 31 ccm Clamping unit: Clamping force: 25 t tie bar distance: 221 mm size of clamping platens: 342x250 mm ejector: hydraulic clamping unit: toggle lever Control system: SELOGICA Additional equipment: Universal machine - injection unit can run both vertically and horizontally Control with air valve Core pull control injection unit hardened - bimetal Clamp for fixing the injection unit vertical Dimensions: Weight: 1150 kg Length/width/height: 2.63x1.34x1.93 m Drive: Pump/motor: 5.5 kW Heating power: 4,6 kW Total power: 10,1 kW All offered machines are started by our service technicians before sale. It is possible to get a video of technical tests of the selected machine or participate in live technical tests in our company in Łódź. Price: Upon request

Condition: refurbished (used), functionality: fully functional, clamping force: 350 kN, Awaiting refurbishment at our headquarters in Northamptonshire is this Arburg 221KS 350/100 U injection moulding machine. Fitted with a Selogica controller. This is a universal machine from Arburg which allows for the clamp unit to be pivoted vertically, ideally suited to insert moulding. These small machines are sought after for the many moulding options they can suit, from a very compact machine. Occasional vertical moulding requirement? These machines are ideal. In standard horizontal configuration, they operate the same as any traditional machine. Any machines awaiting refurbishment with us can be reserved with a 10% deposit and we then prioritise the refurbishment and aim to have the machine available for inspection within 8 weeks from order. Gijdpfx Ahswqnggs Hjl Refurbished machines from STV Machinery undergo a comprehensive test procedure during which every function of the machine is tested and if necessary repaired. A production run of at least 5000 fault free cycles prior to sign off ensures trouble free operation once delivered. Machines are ultra clean and cosmetically as good as we can get them. We guarantee our refurbs are delivered fault free and leak free. Prices shown are ex-works, but we can quickly provide DAP (Delivered at Place) Incoterm pricing on request. We can take out the hassle and additional costs of purchasing machinery within the UK and EU. Contact us with a potential delivery address and we’ll do the rest. Please note that the video shown is of a near identical machine previously refurbished by STV Machinery. It’s a good example of what can be expected once this machine is fully refurbished by our team. *The video shown in this listing is of a previously refurbished Arburg 221 which is similar to the Arburg 221KS machine we are currently refurbishing. Please contact the team if you would like to see the machine in person.

Condition: excellent (used), Year of construction: 2002, Arburg 221K-350-100 Closing 35 tons Year of manufacture 2002 Scrow 25mm Gsdjwgc Drspfx Ah Hoil Injection soaked 49 cm3

Year of construction: 1993, condition: ready for operation (used), A total of six old injection molding machines with various accessories from Arburg and Engel are available. 1) Engel ES80/35, year of manufacture: 1992, clamping force: 350kN, injection pressure: 1500bar, injection weight: 35g/hp, screw diameter: 22mm, centering bore: 110mm, mold opening stroke: 330mm, control: defective. 2) Arburg 305 ECO 700-230, year of manufacture: 1989, clamping force: 700kN, screw diameter: 40mm, centering bore: 125mm, mold height min./max.: 190mm/420mm, tie bar distance X/Y: 305mm/135mm, mold opening stroke: 250mm, control: defective. 3) Arburg 305-210-700, year of manufacture: 1982, clamping force: 700kN, injection pressure: 1500bar, injection weight: 117g/hp, screw diameter: 35mm, centering bore: 125mm, mould height min./max.: 200mm/400mm, tie bar distance: 305mm. 4) Arburg 221-75-350, year of construction: 1992, clamping force: 350kN, injection pressure: 1500bar, screw diameter: 22mm, centering bore: 110mm, mould height min./max.: 150mm/300mm, tie bar distance: 221mm. 5) Arburg 221-55-250, year of construction: 1991, clamping force: 250kN, injection weight: 32g/hp, screw diameter: 20mm, mold height min./max.: 150mm/300mm, tie bar distance: 320mm. 6) 2K injection molding machine Arburg 221-75-350, year of construction: 1993, clamping force: 350kN, injection pressure: 1500bar, injection weight: 38g/hp, screw diameter: 22mm, mold height min./max.: 150mm/300mm, tie bar distance: 221mm. Including 7-8 Arburg dryers, various injection units, compressor AirComp, mixing unit liquid-silicone with Arburg control and Scheugen plow. Documentation available. An on-site inspection is possible. Giedpfx Ahsvb Hbfe Hel

Condition: used, Year of construction: 2006, (2006) Arburg 420 C 800-350 DUROPLAST Clamping force: 80 ton Screw dia: 40mm Giedpfsuy Sdtjx Ah Hjl Weight 3400 kg Machine used for Bakelite production (DUROPLAST)

Condition: excellent (used), Year of construction: 2003, Arburg 570C 2000-350/150 / Production Line with Side-mounted Arburg Multilift Robot / 2K Machine Year of Manufacture: 2003 Injection Unit: Screw diameter: 40 mm Shot weight: 153 g Injection pressure: 2,120 bar Dosage volume: 182 ccm Clamping Unit: Clamping force: 200 t Tie bar spacing: 570x570 mm Platen size: 795x795 mm Ejector: hydraulic Clamping unit: hydraulic Control system: SELOGICA Additional equipment: Production line with side-mounted Arburg Multilift robot Godpfxex Nhn Ue Ah Hjil 2K (two-component) machine Air valve x 1 Hydraulic core pull x 5 Control system with hot runner integration Reinforced injection units – bimetallic Proportional valves on injection units – precision injection Vertical injection unit – screw diameter: ⌀25 mm – 49 g/PS All machines offered are started up by our service technicians prior to sale. It is possible to obtain a video of the technical tests of the selected machine or to participate in live technical tests at our facility in Łódź. Price: On request

Condition: good (used), Year of construction: 2001, operating hours: 56,380 h, machine/vehicle number: 184172, Used injection molding machine The machine has a complete history with all important repair work and components replacement hoses etc. Manufacturer: Arburg Type: 420C 1300-350 Year of construction: 2001 Machine no. 184172 Control system: Selogica Operating hours: 56380 h constant maintenance by manufacturer clamping unit Clamping force: 1300 kN/ 130 tons Distance between tie bars: 420 x 420 mm Mold mounting platens: 570 x 570 mm Ejector stroke: 175 mm / 40 kN Opening stroke: 500 mm Tool installation height: 250 mm Distance between platens: 750 mm max. Injection unit Injection volume: 145 ccm Injection weight: 127 g Cgu3U8W0U Screw diameter: 35 mm Injection pressure: 2500 bar Extras Hydraulic core pull Gjdpfjvimd Nex Ah Hsil - Available immediately from our warehouse in Hanover, free on delivery or free to your door against freight reimbursement - Functionally tested (guaranteed function until first commissioning)

Condition: used, Year of construction: 2004, operating hours: 55,000 h, functionality: fully functional, clamping force: 350 kN, screw diameter: 18 mm, For sale is an injection molding machine of the brand Arburg and the type 320S 350-60 with original Arburg handling The machine is fully functional and ready for immediate use Gedpfsu Hqinjx Ah Heil Technical Data: Year of construction: 2004 Operating hours: 55,000 h Screw Ø 18 mm Clamping force: 350 kN Core pull: 1*Hydraulic Valve gate: Pneumatic Selector switch Handling: Arburg Multilift H-side removal incl. deposit conveyor belt On request, transportation and loading can be organized for an extra charge. can be organized throughout Europe. Prices plus VAT Viewing possible by appointment. Please contact us, our team will be happy to help you. Trade-in or exchange possible! Machines purchase / sale PURCHASE / SALE OF PRODUCTION & METALWORKING MACHINES AND MUCH MORE. Do you need a high-quality but inexpensive metalworking machine for your production? Or do you want to sell yours? For further information or contact options, please visit our website

Condition: excellent (used), Year of construction: 1996, Arburg 220M-350-90 Clamping force: 35 tons Year of manufacture: 1996 Screw diameter: 20 mm Tie bar distance: 22x22 Gisdpjx Nwi Iofx Ah Hol

Condition: excellent (used), Year of construction: 1999, 1,0 St. gebr. Spritzgießmaschine mit Roboter Hersteller: ARBURG Typ: 420C1000-350 Baujahr: 1999 Schließkraft: 100 Tonnen Holmabstand 420 x 420 mm Schnecken DN: 40 mm Dosiervolumen: 182 ccm³ Spritzteilgewicht 172 g/PS Steuerung: SELGOCIA Ausstattung: -Roboter, Hersteller: GEIGER, Typ: LR21, BJ 1998 -2 x Kernzug Gjdju E E Hlepfx Ah Hsil

Condition: good (used), Year of construction: 2001, Arburg 470 C 1300-350 (2001) Clamping force is 130 ton. Total weight is 5,1 ton. Screw diameter 40 mm Tie bar spacing (H) 470 mm Tie bar spacing (V) 470 mm Shot volume 182 cm³ Shot weight 153 g Pressure on material 2120 bar Platen length 650 mm Gijdsw Hdanspfx Ah Hjl Platen width 650 mm Robot interface Number of cores Number of heating zones Opening of the press 850 mm Working hours 130000

Condition: excellent (used), Year of construction: 2001, Arburg 470S 1300-350 Year of manufacture: 2001 injection unit: Screw diameter: 35 mm injection weight: 117 g Injection pressure: 2500 bar Metering volume: 139 ccm Clamping unit : clamping force: 130 t tie bar distance : 470x470 mm size of clamping platens: 650x650 mm ejector: hydraulic clamping unit: hydraulic Gjdsx Nhlmopfx Ah Hsil Control system: SELOGICA Additional equipment: Euromap 12 Robot interface Hydraulic core pull x 1 Control with hot runners x 6 Injection unit hardened - bimetal Proportional valve on the injection unit - precise injection The built-in system for control of pressure quality from the brand Sensor Kistler - measurement of mold pressure type of injection unit: Vario - it offers the possibility to use the injection unit e.g. for lateral injection The new injection unit is installed in the machine Dimensions: Weight: 5100 kg Length/width/height: 4.45x1.49x2.17 m Drive: Pumps/motor: 22 kW Heating power: 10,2 kW Total power: 32,2 kW All offered machines are started by our service technicians before sale. It is possible to get a video of technical tests of the selected machine or participate in live technical tests in our company in Łódź. Price: Upon request

Condition: used, Year of construction: 2005, operating hours: 70,000 h, functionality: fully functional, clamping force: 350 kN, screw diameter: 25 mm, For sale is an injection molding machine of the brand Arburg and the type 320S 350-60 The machine is fully functional and ready for immediate use Technical data Year of manufacture: 2005 Operating hours: 70,000 Giedpfou Hqiuox Ah Hsl Screw Ø 25 mm Clamping force: 350 kN Valve gate: Pneumatic Core pull: 1*Hydraulic Internal pressure transducer Selector switch On request, transportation and loading can be organized for an extra charge. can be organized throughout Europe. Prices plus VAT Viewing possible by appointment. Contact us, our team will be happy to help you. Trade-in or exchange possible! Machines purchase / sale PURCHASE / SALE OF PRODUCTION & METALWORKING MACHINES AND MUCH MORE. Do you need a high-quality but inexpensive metalworking machine for your production? Or do you want to sell yours? For further information or contact options, please visit our website

Condition: used, Year of construction: 1986, Arburg 270 - 90 - 350 Clamping force: 35 tons Year of manufacture: 1986 Gjdpfxex I Rhus Ah Hsil Screw diameter: 25 mm Tie bar spacing: 27x27 cm

Condition: like new (used), Year of construction: 2006, Arburg 470 C 1500-350 (2006) Working hours : only 7.113 h Clamping Force: 150 tons Tie-bar Spacing: (H × V): 470 mm × 470 mm Maximum Plate Size : 650 mm × 650 mm Minimum Mould Installation Height: 250 mm Maximum Distance between Platen (when fully open): ~750 mm Mould Opening Stroke : 500 mm Screw Diameter: 45 mm Approximate Shot Volume (Injection Volume): 230 cm³ Approximate Shot Weight (for PS): 210 g Injection Pressure: 1 670 bar Motor/Drive Power: Example listing ~ 37 kW servo/hydraulic drive power Heating Power: Example listing ~ 10.2 kW Machine Dimensions (Length × Width × Height): 5.4 m × 2.0 m × 2.2 m Machine Weight:4 500 kg Giedpjxqx H Isfx Ah Hol

Condition: excellent (used), Year of construction: 1995, Arburg 420C 1000-350 Year of construction: 1995 Gsdpfx Aox Nhlaoh Hjil Injection unit: Screw diameter: 40 mm Injection weight: 153 g Injection pressure: 2120 bar Metering volume: 182 ccm Clamping unit: Clamping force: 100 t Distance between tie bars: 420x420 mm Size of the clamping platens: 570x570 mm Ejector: hydraulic Clamping unit: hydraulic Control system: DIALOGICA Additional equipment: Euromap Robot interface Hydraulic core puller X 1 Dimensions: Weight: 3700 kg Length/width/height: 4.35x1.64x2.08m Drive: Pump/motor: 22 kW Heating output: 8.6 kW Total output: 30.6 kW All offered machines are started by our service technicians before sale. It is possible to obtain a video of the technical tests of the selected machine or participate in live technical tests at our company in Łódź. Price: On request

Condition: good (used), Year of construction: 2000, operating hours: 59,358 h, functionality: fully functional, clamping force: 800 kN, screw diameter: 35 mm, For sale is an injection molding machine of the brand Arburg and the type 370 Selectra 800-350 The machine is well maintained and fully functional SD card drive retrofitted Video available soon Technical data Year of construction: 2000 Clamping force: 800 kN Control system: Logica Screw diameter: 35 mm Pumping hours: 69544 h Automatic operation: 59358 h Godjrywlqspfx Ah Hoil On request, for an extra charge, the machine can be delivered throughout Europe Prices plus VAT Viewing possible by appointment. Contact us, our team will be happy to help you. Trade-in or exchange possible! Machines purchase / sale PURCHASE / SALE OF PRODUCTION & METALWORKING MACHINES AND MUCH MORE. Do you need a high-quality but inexpensive metalworking machine for your production? Or do you want to sell yours? For further information or contact options, please visit our website

Condition: used, Year of construction: 1985, Arburg 270 - 90 - 350 Clamping force: 35 tons Year of manufacture: 1985 Screw diameter: 22 mm Tie bar distance: 27x27 cm Giedpex I Rg Defx Ah Hjl

Condition: excellent (used), Year of construction: 2003, Arburg 420S 800-350 Year of manufacture: 2003 Injection unit: Screw diameter: 50 mm Shot weight: 250 g Injection pressure: approx. 1300 bar Dosage volume: 288 ccm Clamping unit: Clamping force: 80 t Tie bar distance: 420x420 mm Platen size: 570x570 mm Ejector: hydraulic Clamping unit: hydraulic Control: SELOGICA Additional equipment: Euromap 12 interface Robot interface Air valve x 1 Core pull control Injection unit hardened - bimetallic Proportional valve on the injection unit – for precise injection Integrated original Arburg side sprue picker Dimensions: Weight: 3,800 kg Length/Width/Height: 4.06x1.39x2.12 m Drive: Pump/Motor: 18.5 kW Heating capacity: 10.2 kW Total power: 28.7 kW Godpfxjx Ng Sle Ah Hsil All offered machines are started up by our service technicians before sale. It is possible to receive a video of the technical tests of the selected machine or to participate in live technical tests at our company in Łódź. Price: On request

Condition: good (used), machine/vehicle number: 181825, clamping force: 800 kN, For sale is an injection moulding machine from Arburg, model Allrounder 370 S 800-350. The machine is in good condition. Technical Data: Arburg Allrounder 370 S 800-350 Injection Moulding Machine - Operating hours: - Machine cycles: 8,011,944 - Pump: 69,544 h - Automatic operation: 59,358 h - Clamping force: 800 kN (approx. 80 tons) - Tie bar spacing (H x V): 370 mm x 370 mm (clearance between tie bars) - Mounting platen dimensions (H x V): 545 mm x 545 mm - Maximum opening stroke: 500 mm (variable) - Minimum mould height: Min. 250 mm, partially also min. 200 mm depending on configuration - Maximum daylight: Max. approx. 650 mm−750 mm, depending on minimum mould height - Ejector force: Typically approx. 35 kN Transport and loading can be organised Europe-wide for an additional fee upon request. Prices are exclusive of VAT. Viewing is possible by appointment. Contact us, our team looks forward to assisting you. Trade-in or exchange possible! Gijdpoxt E Tysfx Ah Hjl Machinery Purchase / Sales PURCHASE / SALE OF PRODUCTION & METALWORKING MACHINES AND MORE. Do you require a high-quality yet affordable metalworking machine for your production? Or would you like to sell yours? For further information or contact options, please visit our website.

Condition: excellent (used), Year of construction: 1999, Arburg 420S-800-350 Clamping force: 80 tons Year of manufacture: 1999 Gisdpfxsx I N S Ee Ah Hsl Screw diameter: 40 mm Tie bar distance: 42x42 cm Control system: S Including conveyor belts

Condition: excellent (used), Year of construction: 1997, Arburg 220M 350-90 Year of manufacture: 1997 Injection unit: Screw diameter: 25 mm Shot weight: 41 g Injection pressure: 1860 bar Dosage volume: 49 ccm Clamping unit: Clamping force: 35 t Tie bar distance: 221x221 mm Gijdpfx Asx Ng Awsh Hsl Platen size: 346x346 mm Ejector: hydraulic Clamping unit: hydraulic Control system: MULTRONICA Additional equipment: Perfect technical condition Operating hours: 19,000 h The machine was used by a company producing packaging for the food industry Dimensions: Weight: 1,620 kg Length/Width/Height: 3.30x1.70x1.94 m Drive: Pump/Motor: 11 kW Heating capacity: 4.6 kW Total power: 15.6 kW All machines offered are started and tested by our service technicians prior to sale. It is possible to receive a video of the technical tests of the selected machine or participate in a live technical test at our facility in Łódź. Price: On request

Condition: good (used), Year of construction: 2000, operating hours: 83,000 h, clamping force: 350 kN, screw diameter: 25 mm, For sale is an injection molding machine of the Marker Arburg and the type 320S 350-60 Year of construction: 2000 Operating hours automatic: 83000 Screw diameter: 25 mm Clamping force: 350 kN Barrel length: 60 On request, transport can be organized throughout Europe for an additional charge. Price incl. VAT Gedpfx Ashhuq Aoh Hsil Machines purchase / sale PURCHASE / SALE OF PRODUCTION & METALWORKING MACHINES AND MUCH MORE. Do you need a high-quality but inexpensive metalworking machine for your production? Or do you want to sell yours? For further information or contact options, please visit our website