Used Atlas Ar 60 for sale (438)

Condition: good (used), Pneumatic double diaphragm pump Fpjdpfx Ajdwf S Ujfpei -Fast venting and immediate suction of the medium -Dry running without: damage -Hermetically sealed for: moisture-sensitive liquids -Excellent for: abrasive liquids with low to medium viscosity and materials sensitive to shear forces: -Air max. Pressure: bar -Air connection: 1 "inch -Water output: l/min -Water max. Pressure: bar -Connection: B coupling -Dimensions: 480/400/H530 mm -Weight: 32 kg

Year of construction: 2010, condition: good (used), Oil/water separator, oil-water separation system Fpsdpfx Aeb A Sgkefpei -Dimensions: 660/260/H700 mm -Weight: 18 kg

Year of construction: 1985, condition: good (used), Compressor, compressed air unit, piston compressor -Manufacturer: Atlas Copco, oil-free piston compressor type OIL FREE AIRLET LE 7 N -Motor power: 4 kW -Flow rate: max. 312 l/min -Max. pressure: 10 bar -Pressure vessel: 250 liters -Dimensions: 1400/560/H1180 mm Fpedjy Tu Trjpfx Afpei -Weight: 200 kg

Condition: good (used), Pneumatic cylinder, air cylinder, pneumatic piston, air piston, standard cylinder -Manufacturer: Atlas Copco, Standard cylinder type C4-200-40 -Stroke travel: 200 mm -Piston rod: Ø 40 mm Fpodpfx Aogr E R Asfpji -Dimensions: 330/280/H510 mm Total weight: 33 kg

Condition: refurbished (used), Year of construction: 2006, power: 90 kW (122.37 HP), fuel type: electric, volume flow: 1,000 m³/h, pressure (max.): 7.5 bar, type of cooling: air, We offer this refurbished Atlas Copco GA90 rotary screw compressor, year 2006. Fpjdoyxy Daspfx Afpei The compressor was imported from Europe and has not been operated in Ukraine. Comprehensive repairs have been carried out, including replacement of the screw block bearings and gearbox (multiplier) bearings, shaft seal replacement and bushing, replacement of the flexible coupling for torque transmission, replacement of the electric motor bearings, as well as replacement of all filters and oil. A new inlet valve with a new solenoid valve has been fitted. The thermostatic valve has been overhauled with a new repair kit, as well as the minimum pressure valve, oil-stop valve, check valve with repair kits replaced, and the condensation drain valve has also been serviced. A new Elektronikon compressor control unit has been installed. The hydraulic hoses have been replaced and the oil system has been cleaned. Delivery across Europe can be arranged.

Condition: excellent (used), Year of construction: 2003, Air Compressor Atlas Copco Fpodoww Nv Njpfx Afpsi Type: GA 18AFFVSD Year of manufacture: 2003

Condition: good (used), Year of construction: 1998, operating hours: 1,329 h, fuel type: diesel, motor manufacturer: Yanmar, Field of application: Construction Drive: Wheel Empty weight: 3.380 kg Number of owners: 1 Technical condition: good Visual appearance: good Drill equipment: Tank, Control Panel, Steel canopy Production country: NL Please contact Michael Overmeer for more information = Additional options and accessories = Fsdpeygwfiofx Afpopi - Control Panel - Steel canopy - Tank = Remarks = Atlas-Copco with 1.329 operating hours mounted on a trailer year of construction december 1998 with a hydraulically operated light tower (9 meters), hydraulic support legs and a hydraulic nose wheel. Changes and typographical errors reserved.

Condition: excellent (used), Year of construction: 2014, PROD. ATLASCOPCO Fedpfx Aozicypefpopi TYPE GA75 FF PLUS S/N API619181 YEAR 2014 POWER (kW) 75 CAPACITY (m3/min) 14.95 DISCHARGE PRESSURE (bar) 7.25 HOURS (RUNNING/TOTAL) FREQUENCY CONVERTER no BUILT-IN DRYER yes, R410a 1.1 kg HEAT EXCHANGER no COOLED BY (AIR/WATER) air ON TANK no DOCUMENTS no CONNECTION 2 1/2 NEW/USED USED

Condition: excellent (used), Atlas Type: CI3000 F Atlas CI3000 Xenon Fade-Ometer The Ci3000+ Weather-Ometer and the Fade-Ometer, with their advanced digital control systems, represent significant advancements in the application of digital and optical technologies in user-friendly laboratory weathering devices. The 3000 series has been approved by many OEMs in the textile, paint, and coatings industries, as well as in the plastics industry, as an exclusive platform for precise, reproducible, and repeatable results for predicting service life. Features: Climate type Test type: Sunlight simulation Light source: Xenon arc lamp Applications: Additives and dyes Fodpfx Afezg Tmhjpspi Adhesives and sealants Architecture and construction Automotive industry Food and beverages Graphics Packaging Paints and coatings Photovoltaics Plastics Textiles Wind and solar Consumer electronics Compressed air supply The CI3000’s humidification system uses a compressed air ultrasonic spray nozzle. Before entering the unit, the compressed air must pass through a water/oil separator. The small air regulator in the CI3000 contains a second water-oil filter and a 5-micron particulate filter. Ensure that a separate oil-water separator is installed and do not rely on the filter in the air regulator, as it is only designed as an additional device. Compressed air specifications Pressure: 80-100 PSI (552-689 kPa) Flow rate: 4 CFM (0.11 m³/min) Dimensions: Overall dimensions of the CI3000 37.5” Width x 29” Depth x 72” Height (95 cm Width x 73 cm Depth x 183 cm Height) Required footprint: 41.5” Width x 80” Depth (105 cm Width x 203 cm Depth) Total weight: 404 kg Voltage: 380-220 V 38 A 50 Hz ~3/N/PE 8 kW 404 kg Condition: used Scope of delivery: (See image) (Subject to changes and errors in the technical data and specifications!) We will be happy to answer any further questions you may have by telephone.

Condition: used, Year of construction: 2021, operating hours: 37,000 h, INVERTER COMPRESSOR GA 75 VSD, IN EXCELLENT CONDITION. THE MACHINE HAS BEEN SERVICED EVERY 4 MONTHS (WE ARE AN OFFICIAL DEALER). NEW PRICE: €96,968. MAIN FEATURES: Gujbryiozdf U Ts Uyloc Fpedpfozdga Dsx Afpei MAXIMUM PRESSURE: 13 BAR POWER: 75 kW / 100 HP FLOW RATE: 13500 LITERS/MINUTE Request further information.

Condition: like new (used), Year of construction: 2022, operating hours: 9,900 h, INVERTER COMPRESSOR GA 75 VSD, IN LIKE-NEW CONDITION (WE ARE AN OFFICIAL DEALER). NEW UNIT LIST PRICE: EUR 96,968. MAIN FEATURES: MAXIMUM PRESSURE: 13 BAR Fodszdf U Tepfx Afpopi POWER: 75 kW / 100 HP FLOW RATE: 13,500 LITERS/MINUTE

Condition: like new (used), Year of construction: 2025, operating hours: 2,000 h, Compressor in like-new condition (demonstration unit), only 2000 hours of use. We are an authorized dealer. New list price: €32,074. Main features: Fpodpfx Aszdf Iyjfpsi Maximum pressure: 10 bar Power: 15 kW / 20 hp Flow rate: 2940 liters/min

Condition: like new (used), Year of construction: 2025, operating hours: 3,800 h, Atlas Copco compressor (demonstration unit). Condition is like new. We are an official Atlas Copco dealer. The compressor will be delivered after a full service and will be ready for use. National list price for a new unit is €51,569. Fpsdpfx Afozdf Imopoi Main features: Max. pressure: 10 bar Power: 30 kW / 40 hp Flow rate: 6540 liters/min

Condition: excellent (used), Atlas Type: CI3000+ Ci3000+ Weather-Ometer/Fade-Ometer Model: CI3000W Year of manufacture: 06/2022 Operating time: Device 816.5 hours Lamp operating time: Device 647.4 hours Total lamp operating time: 88.9 hours Atlas CI3000+ Xenon Weather-Ometer with calibration case The Ci3000+ Weather-Ometer and Fade-Ometer, with its advanced digital control systems, represent monumental achievements in the application of digital and optical technologies in easy-to-use laboratory weathering devices. The 3000 series has been approved by many OEMs in the textile, paint, and coating industries, as well as the plastics industry, as an exclusive platform for precise, reproducible, and repeatable results for predicting service life. The 3000 series has been certified according to CE, UL, CSA, ISO, and EN standards. The main features of this device are: a rotating sample rack to maximize the homogeneity of all samples; customizable nozzles for uniform front and back spraying of samples; ASTM black panel thermometer or ISO/DIN black standard thermometer for regulating and monitoring the temperature at the sample level to ensure the repeatability of the tests. 4500 W water-cooled xenon lamp Total exposure area 2188 cm2 (339 in2) 12-inch TFT full-color touchscreen control panel - displays all test parameters Direct setting and control of black panel (BPT, non-insulated) or black standard (BST, insulated) temperature Direct setting and control of relative humidity Direct setting and control of the air temperature of the sample chamber Display of diagnostic messages 14 factory-preprogrammed test methods (Weather-Ometer); 6 factory-preprogrammed test methods (Fade-Ometer) Properties: Type: Climate Test type: Sunlight simulation Light source: Xenon arc lamp Applications: Additives and dyes Fjdpfjzgr Nhex Afpjpi Adhesives and sealants Architecture and construction Automotive industry Food and beverages Graphics Packaging Paints and coatings Photovoltaics Plastics Textiles Wind and solar Consumer electronics Voltage: 340-415V 43A 50/60Hz 〜3/N/PE 8kW 410 kg Condition: used Scope of supply: (See image) (Subject to change and errors in the technical data, information provided!) We will be happy to answer any further questions you may have by telephone.

Condition: excellent (used), Year of construction: 1991, overall weight: 1,000 kg, volume flow: 7.2 m³/h, operating pressure: 75 bar, input voltage: 400 V, ATLAS COPCO GA 45 screw compressor Fpjdpfx Afsukvvaepoi With desiccant dryer 45 kW motor Capacity: 7.20 m3/min Pressure: 7.5 bar The compressor is in perfect working order.

Condition: good (used), Year of construction: 2014, functionality: fully functional, operating pressure: 10 bar, Compressor system consisting of: Screw compressor: Atlas Copco GA11VSD+ Refrigeration dryer: Atlas Copco FD70 Fpodpfjvu A Hdox Afpsi Pressure accumulator Öwamat 4 Oil-injected screw compressor with variable speed control Max. operating pressure: 10.0 bar Engine power: 11 kW Volume flow: 25.5-115.2 m³/h Control hours: 61,837 h Operating hours: 21,094 h Engine starts: 267,928 Load cycles: 315,576

Condition: used, Year of construction: 2014, operating hours: 39,000 h, Atlas Copco compressor, in perfect working order and exceptionally quiet (we are official dealers). Key features: Maximum pressure: 10 bar Fpedpozc Hmhjfx Afpji Flow rate: 19200 liters/minute Power: 110 kW / 150 hp

Condition: new, Year of construction: 2025, new compressor with warranty (we are official dealers). discounted price. list price euro 25441. possibility of combining Atlas Copco dryer (available). latest technological model. main features: max bar 10 power 15kw-20hp air flow liters7min 3000 Fpsdpfx Ajwcm Hiefpei for detailed technical sheet do not hesitate to contact me.

Condition: excellent (used), Atlas Ci3000+ Xenon Weather-Ometer Manufacturer: Atlas Material Testing Technology LLC Type: Ci3000+ Model: Ci3000+ Weather-Ometer Machine Type: Xenon Weather-Ometer / Weathering Test Device For sale is a used Atlas Ci3000+ Xenon Weather-Ometer. The device is suitable for artificial weathering, light aging, material testing, quality control, as well as aging tests of plastics, paints, coatings, textiles, and materials. Technical Data Light Source: Xenon Arc Lamp Lamp Rated Power: 4,500 W Xenon Lamp Operating Range: 1,700 - 4,500 W Device Model as Displayed: Ci3000+ W Sample Sensor 1: Black Standard Sample Sensor 2: Black Panel Light Sensor 1: CI 300 - 400 nm Light Sensor 2: CI 420 nm Power Connection: 220 / 380 V Frequency: 50 Hz Connection Type: 3/N/PE Rated Current: 50 A Power Consumption: 9.5 kW Control Voltage: 24 VDC Compressed Air Supply Required Operating Pressure: 80 - 100 PSI / 552 - 689 kPa Compressed Air Consumption: approx. 4 CFM / 0.11 m³/min Dimensions approx.: 950 x 730 x 1,830 mm (W x D x H) Required Footprint approx.: 1,050 x 2,030 mm (W x D) Weight approx.: 404 kg Minimum Distance Exhaust Hood: approx. 102 - 152 mm Operating Data Equipment Touchscreen Control Panel Xenon Burner Test Chamber with Sample Basket Fsdjzf D Rnopfx Afpopi Black Standard Sensor Black Panel Sensor CI 300 - 400 nm Light Sensor CI 420 nm Light Sensor Water-Cooled Lamp System Exhaust Connection Interface Connections Integrated Humidification System Accessories / Documents Atlas Weathering Testing Guidebook Atlas Weather-Ometer Auxiliary Filter Lantern Kit Instructions Existing Documentation as Shown in Pictures Existing Accessories as Shown in Pictures Areas of Application Artificial Weathering Light Aging Test UV and Xenon Testing Material Testing Plastic Testing Paint and Coating Testing Textile Testing Automotive Industry Quality Assurance Research and Development Scope of Supply Atlas Ci3000+ Xenon Weather-Ometer Existing Accessories as Shown in Pictures Existing Documentation as Shown in Pictures Condition Used Good Optical Condition Optical Condition as Shown in Pictures Inspection possible by appointment. Scope of supply as shown in the pictures. Subject to changes and errors in technical data as well as prior sale.

Condition: excellent (used), functionality: fully functional, power: 103 kW (140.04 HP), overall weight: 13,400 kg, operation weight: 12,400 kg, Year of construction: 2012, machine/vehicle number: 26013220111905, excellent condition Fpjdpfx Afozf Ihwopoi

Condition: ready for operation (used), Year of construction: 2009, functionality: fully functional, machine/vehicle number: API607459, overall weight: 1,580 kg, power: 55 kW (74.78 HP), volume flow: 637.2 m³/h, operating pressure: 7 bar, pressure (max.): 7.3 bar, type of cooling: air, Equipment: refrigerant dryer, Atlas Copco GA55+ FF screw compressor – 55 kW – manufactured in 2009 Fpjdpfx Afjzku Ubopoi For sale: a well-maintained Atlas Copco GA55+ FF screw compressor with an integrated air dryer. The compressor has already been serviced and is ready for immediate use. Specifications: Type: Atlas Copco GA55+ FF Year of manufacture: 2009 Motor power: 55 kW / 75 hp Capacity: 10.62 m³/min Working pressure: 7.3 bar Motor speed: 2,978 rpm Weight: approx. 1,580 kg Operating hours: 17473/4022 Equipped with an integrated air dryer Serviced and ready for use This compressor is suitable for industrial applications that require a reliable compressed air supply. Optionally available with a new or used compressed air tank.

Condition: used, Quantity: 4 units Functionally tested; item originates from the dismantling of equipment from an automotive supplier. 3001 4294-2304 Atlas Copco Manufacturer: Atlas Copco Model: 3001 4294-2304 Fpsdpszfi Tujfx Afpoi Component from Atlas Copco, part of an SCA control or connection unit for industrial applications. Used in automated production environments, particularly in adhesive and dispensing technology. Ideal for replacement, maintenance, or system expansion in existing Atlas Copco systems.

Condition: used, Year of construction: 1988, operating hours: 17,000 h, 1988 | Atlas Copco QAS125KD | Used Generator Set | 17000 hours Fpodpjzg Nr Hjfx Afpei 📍Location: France 🚛 Delivery available to your destination – Use our shipping calculator to estimate transport costs! 💰 Buy Now for EUR 4000 or Make an Offer. Payment at delivery available for an affordable fee (subject to approval)* 👷‍♂️ Inspected by an independent expert 20 inspection points 16 approved ✅ 4 imperfect ℹ️ 0 issues ⚠️ 📌 Inspector's Comment: 17000 hours noting that the meter may not be working since it's illegible; engine that runs impeccably; generator set fixed on the trailer. 📄 Want to see the full inspection, extra photos, or a video? Tip: The reference "40886 Equippo" is commonly used when looking up more details online. 💡 Why this machine and our service stands out: ✔ Thorough inspection by professionals ✔ Jobsite delivery available ✔ Money-Back Guaranteed ✔ Secure and flexible payment options 🔄 Considering other equipment options? We offer helpful tools and resources for all equipment owners and operators – easily accessible on our platform.

Condition: new, Compressor screw Fpjdpfevi Hbhex Afpji Manufacturer: Atlas Copco Suitable for the following models: GA90, GA110, GA132, GA160, GA180VSD, GA200, GA250 Lightweight Price per piece

Year of construction: 2014, condition: ready for operation (used), Three Atlas Copco compressed air compressors are available. 1) Oil lubricated screw compressor Atlas Copco GA18 VSD, year of manufacture: 2014, max. operating pressure: 13bar, power: 18kW, max. air flow: 216m³/h, machine dimensions X/Y/Z: approx. 1300mm/900mm/1500mm, weight: approx. 550kg, operating hours: approx. 69000h. 2) Oil lubricated screw compressor Atlas Copco GA15, year of manufacture: 1998, max. operating pressure: 13bar, power: 15kW, max. air flow: 155m³/h, machine dimensions X/Y/Z: approx. 1900mm/700mm/1600mm, weight: approx. 400kg, operating hours: approx. 69000h. 3) Oil lubricated screw compressor Atlas Copco GA15 for spare parts. Documentation available. An on site inspection is possible. Fpodpfszipgvjx Afpsi