Used Auger Drill for sale (5,232)

Condition: new, Year of construction: 2026, functionality: fully functional, power: 4 kW (5.44 HP), input voltage: 400 V, input current: 16 A, input frequency: 50 Hz, actuation type: electric, rotational speed (max.): 3,100 rpm, rotational speed (min.): 700 rpm, total width: 1,487 mm, total length: 4,440 mm, total height: 2,793 mm, throat depth: 1,490 mm, overall weight: 1,900 kg, Equipment: CE marking, documentation/manual, NEW | YEAR 2026 | CE CERTIFIED | MADE IN POLAND | EXW €38,000 + VAT WHY THE PRIAM The Priam is a vertical, electronically controlled glass drilling machine that does most of the work for the operator. The entire feed is electronically controlled — drilling is smooth and repeatable. The operator's role is minimal. After mounting the hole saws, they press the "Calibration" button — the machine measures the length of both drills (front and rear) and their diameter, then automatically assigns the correct spindle speed. After every drill change, the machine will not start drilling until calibration is done — setup errors are impossible. The hole position on the vertical axis is entered on the monitor and the support bar travels there automatically (up to 1,060 mm below the spindle axis); horizontally, the glass is positioned against 6 stops. The machine does the rest: the pneumatic clamp measures the glass thickness, the rear spindle pre-drills to a depth calculated by the controller, and the front spindle completes the hole from the other side — chip-free, clean edges at the first attempt. Optional: double-sided chamfering (hole saw with chamfering ring), tapered holes, and pulse drilling mode for laminated (VSG) glass. BUILT FOR SERIAL PRODUCTION Up to 20 holes on the vertical axis can be programmed — the operator enters the dimensions once and the machine drills them automatically. In serial production (shower enclosures, balustrades) the following panes are drilled without re-entering positions. Drilling at position 0 on the support bar allows holes on the glass edge (half-moon cut-outs). Performance: a Ø 75 mm hole in 4 mm glass in approx. 25–30 s (feed in glass approx. 1 mm/s, speed set by the operator). Recommended: thin-wall, self-sharpening hole saws (e.g. Champion, L=75 mm). TECHNICAL DATA Drilling diameter range: Ø 5–80 mm (both drills same diameter) Glass thickness: 2–20 mm Max. pane size: 2,000 × 4,000 mm, up to 200 kg Support bar travel: up to 1,060 mm below spindle axis Holes on the glass edge (half-moon): yes, position 0 Drilling program: up to 20 holes on the vertical axis Spindle speed: adjustable 700–2,800 RPM, assigned automatically after calibration Feed: automatic, electronically controlled Cooling: closed water circuit, approx. 30 l Compressed air: 6 bar (pneumatic clamping) Power supply: 400 V / 16 A / 4 kW Machine dimensions (L × W × H): 4,440 × 1,487 × 2,793 mm Weight: 1,900 kg Scope of delivery: CE marking, documentation, operating manual MANUFACTURER, SERVICE, TERMS EXPOGLASS is a Polish manufacturer of glass processing machinery — built at our own factory in Nysa (in-house welding shop and powder coating). Service with online support; spare and wear parts available from stock. Delivery and commissioning across the EU, operator training on site. Delivery time: approx. 8 weeks. Warranty: 12 months. Visit our factory and see the Priam drill your own glass samples before you buy — video of the machine in operation in this listing. Bedoh Ek H Sjpfx Abtedg Glasstec 2026, Düsseldorf, 20–23 October, Hall 12, Stand 12A72.

Condition: excellent (used), Year of construction: 2021, operating hours: 140 h, functionality: fully functional, feed length X-axis: 3,050 mm, feed length Y-axis: 1,250 mm, feed length Z-axis: 80 mm, input frequency: 50 Hz, input current: 29 A, working width: 3,050 mm, We offer this very good HOMAG DRILLTEQ V-500 throughfeed drilling machine, year of construction 2021. Working dimension X 3.050 mm Working dimension Y 1.250 mm Working dimension Z 80 mm Number of milling spindles 1 Main motor power 10 kW Rotation speed max 24.000 rpm Tool clamping system HSK-F63 Tool changer positions 4 Vertical drilling spindles 15 Horizontal drilling spindles in X 6 Horizontal drilling spindles in Y 4 Bedpeylp Slsfx Abtsdg Groove saw 90° turnable Vertical working surface Machine table Feed-through technology Special workpiece clamping system clamp gripper Barcode reader Safety device enclosed cabin Control Homag powerTouch, HOMAG POWER CONTROL Software HOMAG WOODWOP 7.2 Conformity marking CE mark Category: Machining centre Type designation: DRILLTEQ V-500 Subtype: OPTIMAT BHX200 Machine number: 0-250-73-7195 Wiring diagram: 0-250-73-7195 Supply voltage: 400Y/230 V Neutral conductor: yes Phases: 3 Frequency: 50 Hz Maximum operating full load current: 29 A Fuse rating: 35 A Control voltage: 24 V If you have any questions or need more information, feel free to send us a message or give us a call.

Condition: used, machine/vehicle number: 008687, Max. panel width: 1000 mm Max. panel length: 2500 mm No of Bottom Units: 8 Bdodpfjzmmt Iox Abtsg Positioning of Units by NC: yes Lateral horizontal groups: yes

Condition: excellent (used), CNC Flexible Automatic through-feed ROUTERING, DRILLING and CUTTING (SPLITTING) LINE Min/Max workpieces (panels) width (X axis) with PWX100: mm 250 / 3000 Min/Max workpieces (panels) thickness (Z axis) with PWX100: mm 12 / 60 Bedpfx Abezxc Ncetsdg Min/Max workpieces (panels) length-depth (Y axis) with PWX100: mm 100 /1200 (o 600+600) With automatic base-boards handling A) Loader (Bridge Frame) "MAHROS" Double Station, Mod. Brush CF-SX/D, (with automatic martyr panel management system) and with WEBER Double Labeller B) 1° Motorized Roller table "MAHROS" LS with 90° motorized belts (from longitudinal to transverse) C) Connection transfer, with tilter (180°, up-side-down) "MAHROS" Mod. Rib/C HS-C D) Gantry (Portal) CNC (Drilling) "MORBIDELLI" PowerFlex (PWX) 100 - N° 5 mobile consoles (workbenches) controlled by CN on the X-axis - N° 5 upper drilling units (B), each consisting of: - 2 vertical 30-spindle heads (60 in total per unit), rotating 0°-90° (X- and Y-axis) - 2 horizontal spindles (4 in total per unit), rotating 0°-90° (X- and Y-axis) Total 300 vertical drilling spindles + Total 20 horizontal drilling spindles (X and Y) - 2 horizontal groups (1 R + 1 L) with 1 head each with 21 spindles (21 + 21 = total 42) E) 2° Roller conveyor "MAHROS" TR-C with 90° motorized belts (from longitudinal to transverse) F) Splitter (Longitudinal sawing-cutting) "CELASCHI" Model SPL Base 2 (for splitting panels in 2) With 3 working units. After cutting, panel width (MIN 70+70 mm; MAX 600+600 mm) G) Stacker (Bridge Frame) "MAHROS", double station Mod. Brush SSL/D (with automatic management system for martyr panels), with "WANDRES" panel cleaner

Condition: excellent (used), Year of construction: 2013, functionality: fully functional, Year of manufacture: 2013 Milling head Working area X: 3000 Working area Y: 900 Working area Z: 50 Separate units: 1 Bedpjzxyfzofx Abtsdg Vertical drill: 12 Horizontal drill X: 4 Horizontal drill Y: 2 Grooving saw: Yes Stationary machine: Yes Clamping system: Clamps Safety feature: Photoelectric cell Controls and software SCM XILOG Minimum dimensions: 3920x1170x2150

Condition: new, Year of construction: 2026, functionality: fully functional, type of input current: three-phase, total length: 950 mm, total height: 930 mm, table width: 180 mm, input voltage: 400 V, total width: 560 mm, table length: 700 mm, stroke length: 52 mm, rotational speed (max.): 3,000 rpm, rotational speed (min.): 50 rpm, Equipment: documentation/manual, ## DRILLING AND MILLING MACHINE MTP ZAY7025V - 700 x 180 mm Manufacturer: Metal Technics Polska Model: MTP ZAY7025V Year: 2026 Condition: New, fully functional Price: EUR 2,125 net EXW + VAT where applicable Location: Sokolow Podlaski, Poland ### DESCRIPTION The Metal Technics Polska MTP ZAY7025V is a compact and versatile drilling and milling machine designed for drilling, milling, tapping and general machining operations. With infinitely variable spindle speed, a tilting milling head and a large precision cross table, the machine is suitable for metalworking workshops, maintenance departments, tool rooms, educational facilities and small-scale production. The machine is available with 400 V three-phase or 230 V single-phase power supply. ### MAIN ADVANTAGES * Drilling, milling and tapping in one machine * Forward and reverse spindle rotation for thread cutting * Infinitely variable spindle speed: 50-3000 rpm * 2-speed gearbox for efficient power transmission * Milling head tiltable from -90° to +90° * Large cross table: 700 x 180 mm * Digital spindle speed display * Digital spindle feed display * High concentricity thanks to precision spindle bearings * Ergonomic control panel * Safety guard * EMC filter according to CE requirements * Compact and robust construction * Choice of 400 V three-phase or 230 V single-phase ### TECHNICAL DATA * Drilling capacity in steel: 25 mm * Maximum face mill diameter: 80 mm * Maximum end mill diameter: 25 mm * Spindle taper: MT3 * Spindle travel: 52 mm * Spindle speed: 50-3000 rpm * Motor power: 1.0 kW * Table size: 700 x 180 mm * X-axis travel: 490 mm * Y-axis travel: 160 mm * T-slot size: 12 mm * Milling head inclination: -90° / +90° * Milling head height adjustment: 275 mm * Distance spindle to column: 170 mm * Spindle-to-table distance: 45-325 mm * Dimensions (L x W x H): 950 x 560 x 930 mm * Weight: 160 kg * Power supply: 400 V three-phase / 230 V single-phase Bodpfx Aeytpl Uobtedg ### STANDARD EQUIPMENT * B-16 drill chuck * Arbor * Digital spindle feed display * Digital spindle speed display * Forward/reverse spindle function * Safety guard * EMC filter * Service tools * Machine base / stand * Documentation and operating manual ### DELIVERY Delivery can be arranged throughout Europe and beyond. Transport costs are calculated individually according to the destination. Please provide your delivery address or postal code to receive a transport quotation. The MTP ZAY7025V is an efficient and affordable solution for customers requiring drilling, milling and tapping capabilities in one compact professional machine. Contact us for availability, transport quotation or information about other Metal Technics Polska machines.

Condition: used, Year of construction: 2013, functionality: fully functional, input voltage: 400 V, input current: 8 A, input frequency: 50 Hz, overall weight: 520 kg, We offer this used Bottero 710C glass drilling machine, manufactured in 2013. Model: 710C Serial number: GG710C-20596 Year of manufacture: 2013 Voltage: 400 V Frequency: 50 Hz Bdodezmwrnepfx Abtjg Rated current: 8 A Weight: 520 kg If you have any questions or require further information, please send us a message or contact us by phone.

Condition: excellent (used), Year of construction: 1999, power: 6 kW (8.16 HP), total width: 1,200 mm, total length: 2,800 mm, total height: 3,200 mm, table width: 980 mm, table length: 1,470 mm, overall weight: 4,700 kg, Arm Length: 1600mm Max. drill Ø cast: 60mm Max. tap Ø: 40M Max. drill Ø steel:50mm Stroke pinole: 5mm Bodpezxf Arofx Abtodg Floor / table area:1470 x 980mm Speeds / ranges: 2500Rpm Quill Ø: 55mm Power: 6kW Length: 2800mm Width: 1200mm Height: 3200mm Weight: 4700kg Please Note: The information on this page has been obtained to the best of our ability and belief, and from the manufacturers where possible. It is given in good faith, but its accuracy can not be guaranteed. Accordingly, it will not form a representation or constitute contractual terms. We advise you to check any vital details!

Condition: used, Year of construction: 1993, Used machine Year of manufacture: 1993 Features and technical data: 2-jaw drill chuck up to 20 mm shank diameter Pneumatic positioning adjustment on 2 levels 0-100 mm Max. drilling depth: 150 mm Precision indexing rail 12 mm Center locking and cross adjustment Bdedpjw I Uy Tefx Abtjg 2 pneumatic safety clamping cylinders Motor 1.5 kW Speed: 2800 rpm Long hole drilling device, lowerable, with 2 program cams Machine weight approx. 310 kg Machine dimensions (W x D x H): 1100 x 1100 x 1500 mm (without stop) Availability: short-term Location: Röllbach

Condition: good (used), Nagel Citoborma 180 Paper Drill This machine is 100% functional. This is the latest model. The drill table is adjustable in all directions (sides, front/back). It has stops for setting the drilling spacing. The installed table is an enlarged version. Additionally, the drill has an automatic table lock that releases after each cycle. Very good condition. Solid construction – weight 65 kg. Bdjdszt H N Aepfx Abtjg 230V power supply One drilling head. Drill diameter 2-20 mm. Stack height 60 mm. The machine has been serviced. Includes drills and tools, a new cutting stick, and an instruction manual.

Condition: good (used), Type: SSB 3 A Bodsxlqxfspfx Abtedg Machine No.: 5607 Year of manufacture: 1973 Equipment: - MK3 quill - Machine lamp - Quick-action drill chuck incl. morse taper arbor, clamping range 3-16 mm - Infinitely variable speeds Range 1: 0-900 rpm Range 2: 0-1700 rpm - Thread cutting device Condition: good, workshop-tested, speed variator with new bearings

Condition: good (used), functionality: fully functional, fuel type: electric, Core drilling unit / core drilling machine Manufacturer: HILTI with core drilling stand Bdedpfx Abozw Uz Ujtog with the core drilling bits shown in the picture with extension, etc. Pickup or shipping available! Both options are possible!

Condition: excellent (used), Year of construction: 1998, Hofmann HT 200 U frame dowel and elongated hole drilling machine with adjustable angle. Special drilling machine for staircase construction, window construction and universal applications through pneumatic height adjustment. Angled dowel drilling and picket drilling can be easily performed using the rotating drilling unit. Motor with pole change, two speeds Motor power 1.5 / 1.8 kW, 1400 / 2800 rpm Motor start with a practical handle switch Precision chuck with two inserts, 16 mm and M10 thread Table size approx. 1100 x 240 mm Linear laser for precise positioning of the workpiece Drilling unit can be rotated 65 degrees to the left and right Pneumatic adjustment of the machining height, dowel drilling on two levels without retooling The desired drilling heights can be set for each drilling level using a handwheel and digital counter; switching then takes place pneumatically from the front Cross adjustment approx. 320 mm, stepless or in a 12 mm grid Drilling stroke approx. 200 mm 2 pneumatic workpiece clamps, can be positioned at the front and rear of the table 2 swiveling workpiece supports 2 side stops, can also be used as a front support Undercarriage Dust extraction connection 80 mm Bodpfx Ajyfta Tjbtjdg 4 used but good drills 9, 12, 16, 19 mm Few paint spots have been touched up, very good condition, see original photos. A used swiveling elongated hole drilling machine in this condition is rarely available. CE marking Operating manual Dimensions approx. 1200 x 1200 x 1200 mm (L x W x H), weight 310 kg. The machine can be demonstrated on site by appointment. We only offer machines that are ready for demonstration and are stored in our warehouse, see "other offers from this supplier".

Condition: excellent (used), Column drilling machine Manufacturer: Alzmetall Year of manufacture: 1985 Type: AB 35 S Spindle: MK 4 Speed: 65-1750 rpm, continuously variable 3 automatic feeds: 0.1 - 0.2 - 0.3 mm/revolution Coolant system Very good condition Roundness of the drilling spindle better than 0.01 mm Table size: 615 x 375 mm Overhang: 300 mm Transport dimensions without pallet: Depth: 1000 mm Bedpfxszw U Sae Abtsdg Width: 615 mm Height: 1920 mm Weight: 450 kg

Condition: excellent (used), Year of construction: 2022, functionality: fully functional, Equipment: documentation/manual, The automatic drilling machine Jet Smart is the ideal solution for craftsmen and small and medium enterprises. Flexibility, speed and ease of use are the main features of the machine which ensures high productivity and a perfect drilling in any working condition. Bsdpey Rl Arofx Abtjdg Fast and precise drilling! Boring from the top: a choice without compromises! Perfectly aligned joints aligned and no error thanks to automatic reading of piece dimension, that allows to correct any difference between real panel length and the one set. ///Technical details Max. piece dimension - 3050x900x60 mm Min. piece dimension - 200x70x10 mm Max. speed axis X-Y - 40-40 m/min Boring head: vertical / horizontal spindle, blade X - 12 / 6, 125 mm Electrospindle (S6) - 5,5 kW (7,5 HP) - 18.000

Condition: excellent (used), Year of construction: 2015, bore capacity in steel (diameter) 40.0 / 50.0 mm throat 300 mm bore stroke 160 mm turning speeds 200 - 3200 U/min table: 615 x 430 mm bore spindles - Morse Taper 4 Kurzspindel MK column diameter 145 mm feed 0.1-0.2-0.3-0.4 mm/U distance spindle /table 147 / 688 mm engine output 1.8 / 2.9 kW weight 450 kg Current list price: approx. 20.000 euros Special price available upon request Features: - Robust column drill press * Drive: V-belt - VARIO - Automatic spindle feed * with electromagnetic feed clutch Bdedpfx Abszw N Ehsteg * 4 feed speeds: 0.1-0.2-0.3-0.4 mm/U * with electric cross-handle control - swivel work table * 1 station clamping table with 2 T-slots * 1 station with ALZMETALL vise - stepless speed adjustment - Digital speed display - Adjustable drilling depth stop - Pole-reversible drive motor - Clockwise rotation of the drill spindle - Main switch Emergency Stop button - User manual (PDF)

Condition: used, Paper drilling machine, Hang 106 DTK4, $ spindle drilling machine, with various drill bits, 2 different speeds. In good condition. If you are interested, we would also be happy to provide you with information about other machines we have in stock. Bjdpfxjzwdg To Abtsdg You are welcome to inspect the machine at our premises after arranging an appointment in advance.

Condition: used, machine/vehicle number: 008566, X axis working area: 3000 mm Y axis working area: 1300 mm Bodpfxezvwpro Abtjdg Main Electrospindle power: 6.5 KW Number of controlled axes: 3 axes Total number of drilling spindles: 82

Condition: good (used), Durselen PB 16A four-head paper drill The device is in perfect condition, like new! This is the newest one. currently produced model. Production Germany. Four drilling heads with adjustable spacing. The machine has a pneumatic drill cooling system. Sliding work table. Automatic column system – a belt that is moved to the next position when worn out Technical data: Drill diameter: 2-16 mm, Stack height: 50 mm, Bdodpfoztn D Iex Abtjg weight: 300 kg Power supply 380V Automatic drilling cycle, controlled by a foot pedal. Smooth regulation of spindle speed and lowering speed of heads on inverters. Solid construction on a pedestal. Waste is directed to the built-in bin Drill table adjustable in every plane, front and side margins. The set includes operating tools and drills.

Condition: good (used), HANG 114-00/4 paper drill The device is in very good condition. This is the latest product of the hang brand. Bdodpfx Aoztn Duebtjg The highest class of machines among drilling machines.. Waste directed to an external container. Controlled by an electric foot switch. Each head is independently adjustable, which allows the use of drills of different lengths. Technical data: number of drilling heads: 4 drill diameter: 3-10mm stack height: 65mm drill spacing max260mm drill speed: 1500 rpm two table lifting speeds table dimensions: 600x480mm Power supply: 400V Weight: 400kg The machine has documentation, operating tools and drills.

Condition: good (used), Hang 117-01 paper drill The device is in perfect condition, 100% functional. The highest class of machines among drilling machines. Each head is independently adjustable, which allows the use of drills of different lengths. Drill table adjustable in every plane, with a lock. The spacing of the heads is adjustable with a crank. Waste directed to an external container. Two operating speeds: 950 and 1900 rpm Technical data: number of drilling heads: 2 Bdodpfoztn Dbox Abteg diameter of lights: 3-10mm stack height: 60mm drill spacing min: 45mm / max 160mm table dimensions: 780x430mm Weight: 100kg Power supply 380V The machine has documentation, maintenance tools, drills, and a new column

Condition: used, Year of construction: 2018, 1 x CNC-CONTROLLED DRILLING, GLUING AND DOWEL INSERTING MACHINE GANNOMAT "INDEX 130 PRO" (with options as Index 180 Pro) 400V, 3Ph, 50Hz complete in standard design with: - Support with linear guide consisting of: 1 x single-spindle horizontal drilling unit, 1.1 kW motor, tool speed selectable via operator software (3000/5000/8000 rpm) 1 x blow-out, gluing and dowel inserting station in reinforced design for dowels Æ 8 mm, dowel length 30 mm - fully automatic, electronically controlled central lubrication - X-axis NC controlled, with working length 1300 mm, travel speed max. 78 m/min. - Z-axis, position via support table 5-40 mm programmable with NC-controlled Z-axis option - Dowel driving overhang of 7-20 mm, programmable with NC-controlled Y-axis option, drilling depth of 0-35 mm (with drill length GL 70 mm) is automatically set with driving overhang - Closed glue system with 6 bar glue pressure via glue nozzle, for glues with a viscosity of 150 to 350 mPas - Glue quantity continuously adjustable via operator software - GL/WATER selector switch for rinsing the glue system, 1 stainless steel container each for 5 kg glue and 5 l water - Control lamp for residual glue quantity display in the glue container - 1 side stop left, 1 side stop right and 1 center stop (all removable) - 4 start buttons for individual working with 1-4 workpieces - 4 pcs. Pneumatic inclined clamping cylinder 10° for workpiece thicknesses up to max. 80 mm, workpiece length (Y) min. 70 mm - 1 pc. suction funnel, connection Æ 80 mm - 1 pc. TCT control with: built-in industrial PC, incl. Soft PLC type Beckhoff TWINCAT, operating temperature range 0-50°C, TFT industrial display 15" resistive touchscreen, resolution 1024 x 768, CPU 2 GHz, 256 MB RAM, 2x network interface adapters, IDE hard disk, 4x USB rear, 1x USB front, operating system: WINDOWS 7 - programming via menu-driven user software, drilling distances freely programmable with ABSOLUTE, RELATIVE or GRID dimensioning, automatic workpiece mirroring and work step optimization, 4 work fields can be assigned with different programs, graphic workpiece display, parametric programming, 0-point shift, programmable work lists, error diagnosis with plain text OPTIONS: 1 electronic, optical glue monitoring system G.I.C. (Glue Insert Control) for 1 glue nozzle 4 vertical inclined clamping cylinders 10° with holder, additionally, (total 8 clamping cylinders) 1 surcharge for machine bed length 1800 mm with working length 1800 mm 1 surcharge for: 1 horizontal drilling unit, motor 1.5 kW, with multi-spindle drilling head with 3 individually controllable drilling spindles, pitch 32 mm arranged in X-axis, tool speed 3000 rpm. (The standard working length is not reduced) 1 Y-axis NC-controlled, with recirculating ball screw and dynamic traversing speed of 300 mm/sec. The dowel driving overhang 7-30 mm and the drill hole depth 0-42 mm can be programmed via software. (with drill length GL 77 mm) for vertical drilling unit drilling from TOP, Y-axis position 5-42 mm 1 surcharge Y-axis NC-controlled position 5-62 mm instead of 5-42 mm 1 surcharge for: 1 vertical drilling unit drilling from TOP, motor 1.5 kW, with multi-spindle drilling head with 3 individually accessible drilling spindles, 32 mm pitch arranged in X-axis, tool speed 3000 rpm. Y-axis position 5-42 mm, workpiece length (Y) min. 130 mm, (the standard working length is not reduced) 1 Z-axis NC-controlled, with K Bsdpfx Aexwaz Hsbtjdg

Condition: used, Year of construction: 2024, DOWEL HOLE DRILLING MACHINE GANNOMAT "DB 21400V, 3Ph, 50Hz / 1.5 kW, complete in standard design with: - Fully automatic electronic control with pulse operation via foot valve for clamping-drilling-releasing, electric intermittent operation. - Automatic retraction of the drilling unit after reaching the set drilling depth. - Automatic extension of the drilling hole depth when drilling on the end face. This eliminates the need to adjust the drilling hole depth from flat-face to end-face drilling (+10 mm, e.g. for a dowel length of 35 mm, drilling depth on the flat face 14 mm and drilling depth on the end face 24 mm). - 1 drilling bar with 21 spindles, pitch 32 mm, motor 1.5 kW (drilling feed 0-70 mm), incl. 21 quick-change chucks (Ganner system) for easy changing of the drill bits. - Easy pivoting of the drilling unit from 0° to 90°, supported by gas cylinders. - 1 clamping support movable in the Y-axis with 3 pneumatic clamping cylinders, for workpiece height up to max. 80 mm. Ideal stop system consisting of: - 1 stop rail 1800 mm for drilling shelves (aluminum profile 40x40 mm) with 3 stop blocks, with quick-change system, easily interchangeable from right to left stop side for drilling shelves in carcass structures in mirrored fashion, also suitable for row drilling in the 32 system. - Side stops and position settings, as well as the position of the drilling height above the support table, are adjusted by means of mechanical digital counters. - Side stops can be easily pivoted away, for the shortest possible conversion from carcass to frame and row drilling. - Clamping arms for the clamping support designed for row drilling positions up to max. 300 mm. - Ideal three-stage tool system. - 1 set of drill bits for dowels: - 5 carbide dowel drill bits, Ø 8x77 mm, right-hand - 4 carbide dowel drill bits, Ø 8x77 mm, left-hand Basic machine DOWEL HOLE DRILLING MACHINE GANNOMAT "DB 21400V, 3Ph, 50Hz / 1.5 kW, complete in standard design with: - Fully automatic electronic control with pulse operation via foot valve for clamping-drilling-releasing, electric intermittent operation. - Automatic retraction of the drilling unit after reaching the set drilling depth. - Automatic extension of the drilling hole depth when drilling on the end face. This eliminates the need to adjust the drilling hole depth from flat-face to end-face drilling (+10 mm, e.g. for a dowel length of 35 mm, drilling depth on the flat face 14 mm and drilling depth on the end face 24 mm). - 1 drilling bar with 21 spindles, pitch 32 mm, motor 1.5 kW (drilling feed 0-70 mm), incl. 21 quick-change chucks (Ganner system) for easy changing of the drill bits. - Easy pivoting of the drilling unit from 0° to 90°, supported by gas cylinders. - 1 clamping support movable in the Y-axis with 3 pneumatic clamping cylinders, for workpiece height up to max. 80 mm. - Ideal stop system consisting of: - 1 stop rail 1800 mm for drilling shelves (aluminum profile 40x40 mm) with 3 stop blocks, with quick-change system, easily interchangeable from right to left stop side for drilling shelves in carcass structures in mirrored fashion, also suitable for row drilling in the 32 system. - Side stops and position settings, as well as the position of the drilling height above the support table, are adjusted by means of mechanical digital counters. - Side stops can be easily pivoted away, for the shortest possible conversion from carcass to frame and row drilling. - Clamping arms for the clamping support des Bdedpfxjxnlfle Abtog

Condition: ready for operation (used), Radial Drilling Machine, Kovosvit VO 50, Used Machine Bjdpew Hanhsfx Abtjdg Manufacturer: Kovosvit (Czech Republic) Model: VO 50 Arm length (throat depth): 1250 mm Drilling capacity in steel: max. 50 mm Drilling capacity in cast iron: max. 60 mm Spindle stroke: 310 mm Spindle taper: Morse taper MK-5 Speed range: 28–2500 RPM Feed range: 0.05–2 mm/rev Motor power: 4 kW Installed power: 6 kVA Machine dimensions (LxWxH): 3120 x 1030 x 2750 mm Weight: approx. 4200 kg

Condition: ready for operation (used), Radial Drill, Used Equipment Brand: CSEPEL Model: R.F. 2a Description: Column Diameter: 350 mm Vertical Travel of the Arm: 1200 mm Horizontal Travel of the Drill Head: 1000 mm Vertical Travel of the Spindle: 400 mm Spindle Diameter: 65 mm Bedpfow Db Nuox Abtodg 12 Spindle Speeds: 47.5 – 2100 RPM 8 Feed Rates: 0.048 – 1.2 m/min Motor Power: 9 HP