Used Automated Lines for sale (21,940)

Condition: used, Automatic frying line HOJA DRL1000 Technical specifications: - Frying time: 40–345 sec, - Maximum frying temperature: 240°C / 460°F, - Machine dimensions (L × W × H): 2000 × 2600 × 2200 mm, - Total weight: approx. 750 kg, Bedpjxay I Sjfx Aczsww - Outer pan diameter: approx. 1 m, - Usable frying width: approx. 285 mm (11.22″), - Shallow frying with oil level up to 5 mm (0.2″), - Cast iron, flat pan; flatness deviation not greater than ±0.1% of the diameter, - Frying time: from approx. 40 to 345 s, - Maximum heating power: approx. 28 kW, - 2 temperature sensors per pan. Included: exhaust hood, dispenser, spray system, oil filter.

Condition: good (used), For sale: Professional automatic cutting line for EPS (Expanded Polystyrene) blocks. Features & Specification: -Block storage / feeding magazine -Block tilter / inverter -Scrap / waste grinding system (bottom and side) -Horizontal cutting section -Contour / profile cutting section -Cross-cutter section Control System & Condition: The main electrical and control cabinet has been thoroughly modernized, with most components being -practically new. Controlled by a Siemens Simatic S7-1200 PLC. Maximum Block Dimensions: -Length: 410 cm Bedpfxezyyfko Aczjww -Width: 105 cm -Height: 130 cm Line Dimensions: -Cutting line length: 20 m -Block storage length: 6 m -Total straight-line length: 26 m

Condition: used, Oma lathe 1200 mm Genini 1200 mm lathe grinder Bodpfx Acezfyzvszjww Conveyor belts for unloading lathes and loading automatic grinders

Condition: like new (used), Year of construction: 2023, operating hours: 800 h, functionality: fully functional, total length: 1,400 mm, total height: 2,300 mm, total width: 250 mm, workpiece weight (max.): 72 kg, For sale: Nearly new automatic powder coating line, installed in 2023, with approximately 800 operating hours. Current layout footprint: approx. 12 x 28 m, H 5 m. Price and dismantling timeline subject to individual agreements. Layout modifications available: pre-treatment tunnels can be added, and the curing oven can be reconfigured as a straight-through tunnel suitable for parts exceeding 6 meters in length. We can provide a complete quotation including dismantling and international relocation upon separate arrangement. Excellent opportunity to acquire an almost-new line at a lower price and with much shorter lead times compared to a new installation. Monorail conveyor: - Speed: 0.9 – 3.3 m/min - Automatic lubrication - Automatic chain tensioning unit - Chain pitch: 270 mm - Total length: 131 m - Total load capacity: 9500 kg Bwjdpfjx H Tadox Aczsw - Steel supports between the floor and conveyor Automatic powder coating booth Gema: - PVC booth: MagicCompact EquiFlow BA04 - MagicControl 4.0 control panel - Photo-cell frame for automatic gun control - 16 x OptiGun GA03-P automatic guns - 1 x OptiSelect GM04 manual gun - 17 x OptiSpray AP01.1 powder feed pumps - OptiCenter OC07 powder feeding system - Ultrasonic sieve US07 for OptiCenter - 2 x ZA07-23 reciprocators with X-axis automatic control - MonoCyclone EZ05-16, 16,000 m³/h - Powder filter: 16,000 m³/h, 30 kW - Big-Bag system for waste powder collection - CO₂ explosion protection system - Manual spray wall / trolley unit shown in pictures NOT INCLUDED Powder curing oven: - Hybrid heating (electricity or gas) — offers unique flexibility to choose the most economical energy source - Installed capacity: 300 kW - Max. temperature: 220°C - Siemens PLC control panel

Condition: used, Year of construction: 2021, functionality: fully functional, Fully automatic sealing packaging line PRATIKA 80-T MPS for sale! The basket sealing packaging line consists of equipment from various manufacturers, integrated into a single technological line that complies with CE safety directives and has been certified accordingly. The basket sealing packaging line consists of: · PRATIKA 80-T MPS, year of manufacture 2021 · 2 pcs. x 1.80 m conveyors with positioning system · 1 pcs. x 2,70 m conveyor · 2 pcs. x 3 m conveyors · 1 pcs. x 3,30 m conveyor (at the control panel) · 1 pcs. x 1,10 m conveyor · 2 pcs. push cylinders · Control Panel with Siemens controller · Electrical cabinet · Security fences Bsdpfx Acsyxd Nmjzoww Packaging line requires approx. 4 × 11 m of floor space. Layout on request. PRODUCTS SIZES. This line was used to package products with the following dimensions: Kompelement mesh basket size 500x350x160 mm. Productivity in hour 1470 pcs. Kompelement mesh basket size 500x580x160 mm. Productivity in hour 1260 pcs. Kompelement mesh basket size 750x350x160 mm. Productivity in hour 1050 pcs. Kompelement mesh basket size 750x580x160 mm. Productivity in hour 1050 pcs. Kompelement mesh basket size 1000x350x160 mm. Productivity in hour 840 pcs. Kompelement mesh basket size 1000x580x160 mm. Productivity in hour 744 pcs. Jonaxel mesh basket size 459x501x137 mm. Productivity in hour 1260 pcs. TECHNICAL CHARACTERISTICS PLC Programmable Logic Controller Siemens Input/output monitor HMI Siemens Conveyor system speed up to 20 m/min Packing system capacity up to 25 bags per minute with every second bag inserted Maximum packaging film thickness 50 microns Maximum packaging film roll diameter 350 mm Note: Labeling, printer, filter and lasers shown in the photos are not for sale.

Condition: used, Brand: Subal Model: T20 Year of manufacture: 2010 Compliance: CE standard Integrated equipment: - Automatic dough divider-rounder - Intermediate proofing station - Horizontal moulding machine - Optional small bun cutting up to 50 g Performance & Production: - High productivity for bakeries and industrial workshops - Automated operation for optimum time savings - Consistency and precision in moulding Ideal for: Bodsym Uk Aopfx Aczoww Industrial bakeries Large pastry shops Bread production facilities

Condition: used, 2-axis linear guide with linear motors - Slide arm pick and place with linear guides for automation Loading unit such as Scara robot, manipulator, handling device, handling system, placement gripper, loading gripper for automation Manufacturer SCHUNK - GEMOTEC - AFAG - LINMOT Type PS01-37x240-M + E1100-MT + T01-/72/420 + EPM 37-780 Year of construction approx. 2005 Horizontal axis with linear motor Gemotec type EPM 37-780 Actuator type: EPM 37x780-M Axis module: LinMot type E1100-MT-HC Horizontal movement: 780 mm Nominal force horizontal: 160 N Horizontal speed: 2.1 m/s Horizontal acceleration: 12.4 m/s² Repeat accuracy: +/- 0.05 mm Horizontal load capacity: max. 7000 g Horizontal guide column: Ø 20 mm Vertical axis with LinMot linear motor type PS01-37x240-M Actuator type: LM01-23x80/160 Axis module: LinMot type E1100-MT Vertical movement 160 mm Nominal vertical force: 44 N Max force vertical: 203 N Vertical speed: 2.2 m/s Vertical acceleration: 50.4 m/s² Repeat accuracy: +/- 0.05 mm Horizontal guide column: Ø 20 mm Power supply unit LinMot type T01-/72/420 (for motor supply) Input voltage: 3 x 400 V AC 50/60 Hz Output voltage: 72 V DC 420 Watt Base frame Support columns: 4 pieces Ø 55 mm Support column height adjustment: 200 mm (manual height adjustment) Mounting foot: 2 x 175 x 90 mm Control voltage: 24 V DC - Can be moved in two axes Bwedpfsu H R Iwex Aczjw - Mounting plate for tool holder 66 x 56 mm - Integrated path measurement - Axis modules with integrated positioning control - Festo pneumatic cylinder as holding brake on the vertical axis - Horizontal axis with 3 external fans - Axis modules configurable via LinMot MPC Configurator 3.2 software Space requirement L x W x H: 1120 x 720 x 740 mm Weight: approx. 65 kg Very good condition

Condition: used, Automation Assistant Oy Linear Guided Free Fall Tester Automation Assistant Oy LG2750 Professional linear guided free fall test stand for reproducible drop and impact tests For sale is a used Linear Guided Free Fall Tester from the manufacturer Automation Assistant Oy. The test stand is suitable for reproducible drop and impact tests in research, development, quality assurance, and industry. Operating manual and electrical documentation are available. Technical data: Manufacturer: Automation Assistant Oy Type: LG2750 Machine type: Linear Guided Free Fall Tester Made in Finland Power supply: 230 V AC / 50 Hz Max. current consumption: 10 A Control voltage: 24 V DC / 2.5 A Pneumatic supply: max. 8 bar Impact material: Concrete garden brick 300 × 300 × 50 mm Dimensions (approx.): Width: 850 mm, Depth: 900 mm, Height: 2750 mm Total weight: approx. 210 kg Test tower: approx. 155 kg Impact table: approx. 55 kg Equipment: Touchscreen control panel Enclosed safety cabinet with protective glazing Linear guided drop sled Pneumatic gripper SMC pneumatic components Emergency stop system Impact table with concrete impact plate Electrical documentation available Accessories as shown in the pictures Application areas: Drop tests Impact tests Product testing Quality assurance Research and development Laboratory and industrial applications Scope of delivery: Automation Assistant Oy LG2750 Linear Guided Free Fall Tester Operating manual Electrical documentation Accessories as shown in the pictures Condition: Used Visual condition as shown in the pictures. Normal signs of wear and tear due to age. Bsdjzn Uqdjpfx Aczoww Shipping by freight forwarder is possible. Subject to changes, errors and prior sale. We will gladly answer any further questions by telephone.

Condition: new, INTEGRATED MODULAR SOLUTIONS FOR AUTOMATED CORRECTION BOX PRODUCTION Bodowvifnjpfx Aczsww Fully automated production lines for corrugated cardboard boxes Zemat Technology Group offers state-of-the-art, flexible, and fully automated production lines for corrugated cardboard boxes, engineered for the manufacturing of custom cartons. Key Benefits: - Fully customizable – Configurable to specific production requirements - Industry 4.0 ready – Integrated with JQS Job Queue System - High efficiency – Reduces production time and costs - Quick setup change – Less than 60 seconds setup time - Intelligent automation – Touchscreen HMI control with remote diagnostics via VPN Applications: - Shipping cartons - Custom pre-printed packaging - Special corrugated board boxes Why choose BOXMAT production lines? - Complete automation – From feeding to stacking - No special tools required – Fast setup & reduced downtime - Scalable & modular – Expand your production capacity as needed Increase your efficiency and streamline your workflow with the integrated modular solutions from Zemat Technology Group for the automatic production of corrugated cartons. Our cutting-edge production lines are designed for manufacturers demanding flexibility, precision, and automation.

Condition: good (used), Year of construction: 2004, I sell the semi-automatic finger joint line GreCon Profijoint PJ7/6100-LI. Year 2004. Input length 100-1.000mm Bjdpemig Tdsfx Aczoww Input width 40-150mm / 510mm in 1 step Input thickness 20-50mm Automatic finger joint unit with glue spraying 1 side Automatic turning of the material for the 2nd pass on turning table Automatic feeding to the press Press 3,00 - 6,10m with automatic cycle and end-cutting saw Total area covered 10.50 x 3.50 m Strong construction. Very good condition. Available immediately.

Year of construction: 2016, condition: good (used), for sale: Complete Niverplast packaging line Year of manufacture: 2016 1. Manual infeed Niverplast 2. Depanner for baguettes from AUXPAMA 3. Metal detector 4. Reject system 5. Counter + speedbatcher Niverplast 6. Combiplast Niverplast 7. Boxloader Niverplast 8. Varioseal Niverplast 9. Metal detector 10. Pallet sealing device 11. Conveyor systems Niverplast Full documentation, layout, and specifications available. If you have any questions or comments, please feel free to contact me. Inspection on site is also possible. Dismantling and transport can be offered. Bodsx Ari Hspfx Aczeww Kind regards, Leo Holland

Condition: good (used), Year of construction: 1980, functionality: fully functional, Automatic edger line Söderhamn (Kockums) Edger 511-A Built approximately 1975-1980, or 2000 With complete 6.2 m x 1.5 m infeed conveyor with automatic centering and motorized feed. Board width continuously adjustable. Feed speed 77-118 m/min Minimum edger width 75 mm Maximum edger width 350 mm Maximum wood thickness 125 mm Fixed saw blade 6 feed grooves Saw spindle speed 1800 rpm Maximum saw blade diameter 650 mm Bsdeuq N Agopfx Aczjww Weight with motor and control station 2050 kg

Year of construction: 2021, condition: used, Lumacon automatic crate filling line Bedpfx Acjv E Irgezjww Automatically feeding of 4 crates/ boxes per cycle. When the weight has been reached the conveyor belts will remove the filled crates and prepare 4 empty crates for filling. - Complete with inclined conveyor belts - Buffer belts - Weighing belts - Multiple lines available from stock (Emmeloord) More photos and full specifications: /

Condition: ready for operation (used), Year of construction: 2016, functionality: fully functional, workpiece height (max.): 60 mm, roll diameter: 830 mm, On-site inspections while the machines are running are possible in Lithuania! Fully automatic edge banding line with the following machines: HOMAG PROFI KAL330/9/A3/WZ (year of manufacture 2013) HOMAG PROFI KAL370/8/A3/WZ (year of manufacture 2016) HOMAG PROFI TBL100/20/30/F infeed table (year of manufacture 2013) HOMAG POWER TWL410/25/LQ transfer system cross conveyor (year of manufacture 2016) TECHNICAL DETAILS HOMAG PROFI KAL330/9/A3/WZ & PROFI KAL370/8/A3/WZ edge banding machines Workpiece width without edge at a workpiece thickness of 12–22 mm: min. 60 mm (depending on the workpiece length) Workpiece width without edge at a workpiece thickness of 23–60 mm: min. 100 mm (depending on the workpiece length) Workpiece overhang: 30 mm Workpiece thickness: 12–60 mm Edge height: max. workpiece thickness + 4 mm Edge material on a roll: 0.3–3 mm Edge material height PVC: max. 135 mm Edge material height veneer: max. 100 mm Roll diameter: max. 830 mm HOMAG PROFI TBL100/20/30/F infeed table Roller diameter: 54 mm Roller spacing: approx. 60 mm Panel length: 240–2,500 mm Panel width: 120–3,000 mm HOMAG POWER TWL410/25/LQ transfer system cross conveyor Roller diameter: 64 mm Roller spacing: 110 mm Panel length: 240–2,500 mm Panel width: min. 240 mm Panel thickness: 8–60 mm Panel weight: max. 80 kg EQUIPMENT Clearance-type joining-cutting unit on both edge banding machines A3 basic gluing unit on both edge banding machines Bwjdpfsz A Tx Tex Aczow Clearance-type processing units on both edge banding machines FA11 finishing unit on the HOMAG PROFI KAL330 FA21 finishing unit on the HOMAG PROFI KAL370 Fixed stop on the left side of the infeed table Transport rollers on the infeed table Side conveyor belt on the infeed table Electropneumatically controlled cross guard on the infeed table Manually adjustable infeed guard Set of small parts Integrated air cushion table Fixed stop on the left side in the infeed and outfeed of the transfer system cross conveyor Infeed roller track with conveyor belt and cross transport Controlled cross conveyor in the infeed Outfeed roller track Controlled cross conveyor in the outfeed Electropneumatically controlled stop guard Side transport belt Manually adjustable panel overhang

Condition: excellent (used), Flexible N.C. line for drilling, routing and "hardware" insertion. Numerical Control "TPA" Albatros. Composed by: 1) Hedgehog loader, with 12 positions (for 12 panels), vertical panel introduction. 2) CNC Drilling and routering machine Mod. Over 25.13 with inserter (for bushes, shelf support and base). - N. 1 operating head (estimated KW 5,5) with tool storing revolver (10 positions) - N. 1 boring head with 24 independent spindles (X axis) - N. 1 boring head with 2 independent spindles (Y axis) - N. 1 boring head with 5 independent spindles (Z axis) - N. 1 insertion unit (bushing screwing) - N. 1 insertion unit (shelf support pressure) - N. 1 storage and feeding tank 3) Unloader (90° side-deplacement), with motorized conveyor for vertical outfeed of the panel. Bwsdpfxshvagks Aczew 4) Unloader - tilting (0°-90) moves the panel from vertical to horizontal, with motorized conveyor

Condition: excellent (used), functionality: fully functional, Year of construction: 2018, machine/vehicle number: 125102018, Manufacturer: TMA Automation sp. z o.o., Year of production: 2018 Bwedpfx Acozwdx Nozsw SET DESCRIPTION For sale is a complete set of two cooperating Cartesian robots manufactured by the Polish company TMA Automation, designed for use with injection molding machines. The set consists of a MIDI LINE linear robot and a UNI LINE in-mold labeling (IML) module. The robots were used in a production facility and are in a condition confirmed by technical documentation. The sale includes complete documentation. TECHNICAL DATA MIDI LINE robot (serial number: 125102018) Dimensions (L x W x H) 2400 x 2060 x 1435 mm (variable height), Weight 600 kg, Payload 8 kg, Z-axis reach 2300 mm, Y-axis reach 1400 mm, X-axis reach 1400 mm, Supply voltage 400 V / 50 Hz, Power 4.5 kW, Operating air pressure 6.5 bar UNI LINE robot with IML module (serial number: 126102018) Dimensions (L x W x H) 2540 x 1000 (1370) x 2090 mm, Weight 550 kg, Payload 8 kg, Stacker reach 1100 mm, Supply voltage 400 V / 50 Hz, Power 1.5 kW, Operating air pressure 6.5 bar EQUIPMENT INCLUDED Touchscreen control panel with a safety STOP button (e-stop), control software with the following functions: automatic mode, manual mode, no-label mode, no-part removal mode, program archive, graph and alarm module; complete technical documentation, CE marking on both machines. TECHNICAL CONDITION Robots from 2018, operated in industrial conditions (plastics injection molding). Control panel active; at the time of the photographs, program PRG 2 was selected, operating speeds: manual 22%, automatic 17%. The photographs show a red robot stop signal (standby condition, not an emergency). Recommended before purchase: personal inspection and test run at the installation site. SALES CONDITIONS Sold only as a set. Self-collection only. Transportation is the buyer's responsibility.

Year of construction: 2026, condition: new, functionality: fully functional, Automatic machine for large-scale production or as professional equipment. Automatic tilting system, with electric motorization Automatic Control Panel with TFT screen and PLC TECHNICAL FEATURES: Body made of AISI304 18/10 stainless steel. Bowl made of AISI304 18/10 stainless steel integrated into the body. Wheels to facilitate movement, 150 mm diameter. Adjustable legs. High-power industrial burner controlled by a digital device and temperature probe. Suitable for indoor and outdoor use. Also available in Electric models. Machine with oil filtration system and pump Automatic basket tilting system Optional motorized stirrer for perfect frying of the product on all sides. Bedpfxeww Uago Aczoww TFT screen with safety probe and temperature probe. On the TFT touch screen, you can make recipes, filtration, data collection. Insulation with high-temperature thermal blanket SUPERWOLL, Density 128kg/m³, thickness 13mm. Except for chimneys. Smoke exhaust chimneys and

Condition: used, Automatic lattice girder welding line TE 30 S made by EUROLLS Model : TE 30 S Maximum stacking height : 500 mm Wire diameter - Upper current (ds -smooth or barbed) : From 4 to 12 mm - Lower current (di- smooth or barbed) : From 4 to 12 mm - Diagonal wire (dg- smooth or barbed) : From 3 to 8 mm Diagonal pitch (P) : 200 mm Beam pitch : 400 mm Maximum speed with hot and cold drawn wire : Max 30 m/min Maximum spool weight in feed : 3000 kg Bodpfxovtqacs Aczjww Machine type: TE 30 S Maximum stacking height: 500 mm Wire diameter Upper current (ds -smooth or barbed): From 4 to 12 mm Wire diameter Lower current (di- smooth or barbed): From 4 to 12 mm Wire diameter Diagonal wire (dg- smooth or barbed): From 3 to 8 mm Diagonal pitch (P): 200 mm Beam pitch: 400 mm Maximum speed with hot and cold drawn wire: Max 30 m/min Maximum spool weight in feed: 3000 kg

Condition: new, mileage: 25 km, power: 129 kW (175.39 HP), first registration: 08/2026, fuel type: diesel, fuel: diesel, brakes: retarder, color: other, gearing type: automatic, emission class: euro6, number of seats: 24, total length: 7,700 mm, total height: 3,100 mm, Equipment: ABS, USB port, air conditioning, retarder, = Additional Options and Accessories = - Air conditioning for the driver - Air conditioning system = Further Information = Bedozwdhwopfx Aczsww Damage: none = Company Information = We are an international company based in Belgium, in the Brussels area (+/-20 km). Belgian Bus Sales is your ideal partner for the buying and selling of used buses and has a large parking area that serves as a showroom. We always have a large number of buses of all brands, capacities, models, and in every price range in stock. We can find the right tourist, school, or city bus for you, tailored to your needs and budget. All information is provided without guarantee. Errors, prior sales, and typographical errors excepted. Opening hours for viewing the used buses: Mon-Fri: 08:30 - 12:00, 12:30 - 17:00. (Mowimy po Polsku Agata) We speak your language: Dutch, French, English, Spanish, Portuguese, Italian, Russian, Polish, and more.

Year of construction: 2007, condition: like new (used), FICEP 601 DZB CNC DRILLING LINE with 4 way SCRIBING FACILITY I-Beams (without camber): Web height minimum 60mm maximum 610mm. Flange width minimum 30mm maximum 310mm. UNP Channels (web downwards): • Web height minimum 60mm maximum 610mm. Flange width minimum 30mm maximum 300mm. Angles • Flange height (unequal flanges as well) minimum 50 x 50 x 5mm maximum 250 x 250 x 40mm. Flats • Width minimum 100nn maximum 610mm. Square tubes • Size minimum 60 x 60mm maximum 300 x 300mm. Rectangular tubes • Size minimum 60 x 30mm maximum 600 x 300mm. All beams • Maximum thickness that can be drilled 50mm. Bjdpsh N Taaefx Aczjww Maximum length (infeed) 12000mm.

Condition: new, mileage: 15 km, power: 129 kW (175.39 HP), first registration: 04/2026, fuel type: diesel, fuel: diesel, brakes: retarder, color: other, gearing type: automatic, emission class: euro6, number of seats: 24, total length: 7,700 mm, total height: 3,100 mm, Equipment: ABS, USB port, air conditioning, retarder, = Additional options and accessories = - Air conditioning (driver) - Air conditioning - Webasto heater = Further information = Damage: none = Company information = We are an international company based in Belgium, near Brussels (approx. 20 km). Belgian Bus Sales is your ideal partner for the purchase and sale of used buses and offers an extensive parking area serving as a showroom. We always have numerous buses of all brands, capacities, models, and in every price range in stock. We can find the right coach, school bus, or city bus tailored to your needs and budget. All information is provided without guarantee. Errors, prior sale, and typographical errors reserved. Viewing hours for used buses: Mon.-Fri.: 08:30 - 12:00, 12:30 - 17:00. Mowimy po Polsku (Agata). We speak your language: Nederlands, Français, English, Español, Português, Italiano, Русский, Polski, and more. Bwsdpfx Aey Iciqjczjw

Condition: new, mileage: 25 km, power: 129 kW (175.39 HP), first registration: 08/2026, fuel type: diesel, fuel: diesel, brakes: retarder, color: other, gearing type: automatic, emission class: euro6, number of seats: 24, total length: 7,700 mm, total height: 3,100 mm, Equipment: ABS, USB port, air conditioning, retarder, = Additional Options and Accessories = - Air conditioning for the driver - Air conditioning system = Further Information = Bwedpozv Tzdefx Aczew Damage: none = Company Information = We are an international company based in Belgium, in the Brussels area (+/-20 km). Belgian Bus Sales is your ideal partner for the buying and selling of used buses and has a large parking area that serves as a showroom. We always have a large number of buses of all brands, capacities, models, and in every price range in stock. We can find the right tourist, school, or city bus for you, tailored to your needs and budget. All information is provided without guarantee. Errors, prior sales, and typographical errors excepted. Opening hours for viewing the used buses: Mon-Fri: 08:30 - 12:00, 12:30 - 17:00. (Mowimy po Polsku Agata) We speak your language: Dutch, French, English, Spanish, Portuguese, Italian, Russian, Polish, and more.

Condition: new, mileage: 25 km, power: 129 kW (175.39 HP), first registration: 08/2026, fuel type: diesel, fuel: diesel, brakes: retarder, color: other, gearing type: automatic, emission class: euro6, number of seats: 24, total length: 7,700 mm, total height: 3,100 mm, Equipment: ABS, USB port, air conditioning, retarder, = Additional Options and Accessories = - Air conditioning for the driver - Air conditioning system Bwjdpjzwun Uofx Aczsw = Further Information = Damage: none = Company Information = We are an international company based in Belgium, in the Brussels area (+/-20 km). Belgian Bus Sales is your ideal partner for the buying and selling of used buses and has a large parking area that serves as a showroom. We always have a large number of buses of all brands, capacities, models, and in every price range in stock. We can find the right tourist, school, or city bus for you, tailored to your needs and budget. All information is provided without guarantee. Errors, prior sales, and typographical errors excepted. Opening hours for viewing the used buses: Mon-Fri: 08:30 - 12:00, 12:30 - 17:00. (Mowimy po Polsku Agata) We speak your language: Dutch, French, English, Spanish, Portuguese, Italian, Russian, Polish, and more.

Condition: excellent (used), DIMTER HK 400 – AUTOMATIC FINGER JOINTING LINE Bwjdpfexvniiex Aczow For sale is a fully automatic finger jointing line for wood, DIMTER Type HK 400 E/D. This is an advanced system designed to maximize efficiency and quality in the jointing of both hardwood and softwood.

Condition: used, Year of construction: 1996, operating hours: 26,000 h, machine/vehicle number: LC676, Used Tetra Pak TBA 19 200ML Slim Filling lineTechnical Specifications & Performance DataThis used bottling line is built around a Tetra Pak TBA 19 V10 filling machine for 200 ml Slim carton formats. Designed for dairy product processing, the line provides an integrated solution for filling, straw application, secondary packaging and product conveying in an industrial packaging environment.Filling machine: Tetra Pak TBA 19 V10Container format: 200 ml Slim Tetra Brik cartonProduct application: dairy productsYear of manufacture: approximately 1996Running hours: approximately 26,000 hoursConveyor system: approximately 30 meters, including 4 x 90° curves and 2 x chain tensionersAdvanced Automation & Control SystemsThe line combines dedicated filling and packaging equipment into a coordinated production arrangement. Its conveyor system supports the controlled transfer of individual cartons between the filling, straw application and packaging stages. Chain tensioners are included to help maintain reliable conveyor operation and product flow through the line.Machines of this type are typically operated through the individual controls of the filler and downstream packaging modules, allowing operators to manage the principal filling and handling stages from the relevant equipment stations.Production Line Integration CapabilitiesThis complete carton bottling line is configured for the 200 ml Slim format and includes filling, straw application, tray packing, tray shrink wrapping and conveying equipment. It is suitable for integration into dairy beverage production operations requiring a compact line layout for Tetra Brik cartons.Machine typeManufacturer / modelYearFilling MachineTetra Pak TBA 19 V101996Various Equipment - Straw ApplicatorTetra Pak TSA 211996Various Equipment - ConveyorsTetra Pak1996Case PackerTetra Pak TCBP 70 Multiinfeed1996Shrink WrapperTetra Pak TTS 511996The Tetra Pak TCBP 70 Multiinfeed tray packer is compatible with, or can be configured as an option for, wrap-around packaging. The Tetra Pak TTS 51 tray shrink wrapper completes the secondary packaging process after tray packing.Machine Condition & Maintenance HistoryThe second hand bottling line has been workshop checked, fully tested and... Bodpfx Acez E Dgajzoww