Used Automated Lines for sale (19,989)

Condition: used, Guard Rail Roll Forming Line: • The production line for road safety barriers consists of: • Accessories and rollers for the production of 2- and 3-wave guard rails • Bending machine for 2- and 3-wave profiles • 19-station roll forming machine, complete with rollers and motorization • No. 3 punching stations • No. 1 cutting station Dksdpfx Aajxnmmqs Njl • No. 7 hydraulic power units • No. 1 station with feeding rollers

Condition: used, Year of construction: 1994, operating hours: 34,000 h, machine/vehicle number: LC613, Used line tetra pak TBA 8 - 1L slim 6000 PPHTechnical Specifications & Performance DataThis second hand complete bottling line is engineered for industrial packaging of aseptic carton containers, centered on the renowned Tetra Brik Aseptic platform. Designed for beverage production environments that demand hygiene and reliability, it provides end-to-end handling from aseptic filling through cap application to final case packing. As a used bottling line, it offers a cost-effective route to expand capacity while maintaining quality standards.Main filler: Tetra Brik Packaging Systems AB TBA 8 / 1000 SLIMConstruction year (main filler): 1994Package format: 1.0L Slim cartonSpeed: 6000 Packs/hour (PPH) Auxiliary equipment: Tetra Pak Cap Applicator 21; Tetra Pak Cardboard Packer 70Line application: Aseptic carton filling with downstream capping and case packingCompliance: CE markedAdvanced Automation & Control SystemsThe line leverages factory-integrated automation from the Tetra Brik Aseptic platform, designed for consistent performance and operator-friendly control. Safety interlocks and guarded access points support secure operation during beverage production. Standardized control architecture streamlines start-up, shutdown, and recipe management for the 1.0L Slim carton format.Centralized operator interface for coordinated filler, capper, and packer functionsAutomated sequences for aseptic filling and downstream handlingSafety circuits and emergency-stop devices for protected operationDesigned to support quick diagnostics and routine maintenance tasksProduction Line Integration CapabilitiesThis used bottling line integrates aseptic filling with cap application and case packing to create a cohesive industrial packaging solution. It is suitable for beverage production environments requiring carton handling and end-of-line packing. The cap applicator 21 and cardboard packer 70 are configured to work inline with the TBA 8 / 1000 SLIM, minimizing transfers and ensuring stable throughput.Inline configuration from filler to cap applicator to case packerOptimized for 1.0L Slim carton containersCompatible with standard conveyor and accumulation layoutsDesigned for inline operation; can be adapted to existing conveyor systemsMachine Condition & Maintenance HistoryOffered as a second hand, complete bottling line in working condition and ready for operation. It presents an efficient option for facilities seeking a pre-owned aseptic carton solution without the lead times typical of new equipment. Routine recommissioning and line integration services are recommended according to site standards.Operational status: Ready for operationCommercial status: Used/second hand industrial packaging lineOperational Performance & VersatilityThe TBA 8 / 1000 SLIM is a proven aseptic filler for carton containers, engineered for stable, hygienic beverage production. Downstream, the cap applicator 21 ensures accurate closure application, while the ... Djdpfx Aoyvpt Esa Nskl

Condition: good (used), Year of construction: 2002, Rondo Laminating and Shaping Line for Yeast Pastries - Smartline and Compactline model - used - year of manufacture: 2002 - length: 15 meters - without tools - components: satellite calibrator, dough rolling cylinder, standard calibrator, work table, cutting station, guillotine, discharge table Dkedpfx Asw Nx S Noa Nol - machine in production - collection from warehouse / shipping option - price on request

Condition: good (used), Year of construction: 1996, Rondo Compactline Bun Line - used - year of manufacture: 1995-96 - components: Compactline work table, calibrator, cutting station, moistening station, filling machine, roller, rolling station, guillotine, receiving table, 4 cutting rollers, 3 decorations Djdpfx Aasyglg Uj Nskl - length: 7.70 m - stainless steel construction - manual control - machine from production - complete overhaul available on request - ex stock - price on request

Condition: excellent (used), Year of construction: 1998, Fritsch Cutting Table, Confectionery Line - Model FT 450-L - Year of manufacture: 1998 - Length: 4.5 m Djdeyucy Ijpfx Aa Njkl - Electronic control - 2 cutting rollers - Calibrator/option - Technical condition: very good - Collection from warehouse/shipping option - Price on request

Condition: good (used), Year of construction: 2010, Koenig G 2000 Roll Line Dkodpfxoyu Rt Aj Aa Nol - used - year of manufacture: 2010 - Mini REx Futura divider - 2-row - weight range: 20–135 g - machine from production - checked and cleaned - collection from warehouse/shipping option available - price on request

Condition: like new (used), Brand:Waco Type:KS300 Complete cutting line Waco with 3 electropneumatic lengtstopper in and out feeding conveyor 3+2meter Techn info: Max saw balde 400mm Max cutting hight 70mm Motor 5,5kw, 400 volt, 50 Hz, 3 phase Electropneumatisc control of saw blade and length stopper, Dedpfsh Ek N Ajx Aa Nokl Stock no:2000596 Size for transport: Saw 120x105x215cm (lxwxh) Conveyors:300x80x35cm Total weightt:350 Kg

Year of construction: 2026, condition: new, Complete roll forming line for solar C profile production with punching, width adjustment and turnkey automation. Bosporas Machinery is a manufacturer of coil processing and roll forming lines, delivering high-performance and customized industrial solutions worldwide. This Solar C Profile Production Line is designed for the manufacturing of high-quality C profiles used in solar mounting structures and renewable energy projects. The system provides a complete turnkey solution from coil feeding to finished profile output. Engineered for precision, durability and production flexibility, the line ensures stable operation, accurate punching, consistent forming quality and long-term industrial performance. ⚙️ PRODUCTION RANGE The system can produce different C profile sizes according to project requirements: Web Width: 80 – 200 mm Flange: 40 – 60 mm Lip: 20 – 25 mm Material Thickness: 3 – 4 mm Custom profile dimensions are available upon request. 🔧 LINE CONFIGURATION The production line consists of: Hydraulic Coil Loading Car Dsdpfxjy Any Rj Aa Nskl Hydraulic Decoiler Pinching Unit Straightener & Welding Station Servo Feeder 40 Ton Punch Press Roll Forming Machine Hydraulic Fix Type Shear Conveyor System Optional Automatic Stacking System ⚙️ ENGINEERING FEATURES Servo-controlled feeding system for accurate punching positions Programmable feeding with multi-job memory High precision punching and forming process Roll forming machine with NC width adjustment Hardened rollers for long service life Heavy-duty machine frame for continuous production PLC & HMI controlled automation system ⚡ OPERATIONAL ADVANTAGES Complete turnkey solar profile solution Flexible production for multiple profile sizes High product consistency and repeatability Reduced labor and improved efficiency Short lead time compared to European manufacturers 🏭 APPLICATION AREAS Solar mounting systems Solar farm structures Renewable energy projects Steel support profile production Infrastructure projects 🧩 OPTIONAL CONFIGURATIONS Automatic stacking system Different profile dimensions Tooling for customized hole patterns Automation upgrades Turnkey factory integration solutions 📸 REFERENCE PROJECTS Images included in this listing show reference installations of similar solar profile production lines successfully manufactured and commissioned in different countries. These references demonstrate our proven engineering capability and international project experience. Additional references, videos and technical details can be provided upon request.

Year of construction: 2026, condition: new, Customized roll forming production lines for standard and special steel profiles with turnkey automation solutions. Bosporas Machinery is a manufacturer of coil processing and roll forming lines, delivering high-performance and customized industrial solutions worldwide. Our custom roll forming lines are designed for serial production of sheet metal profiles directly from coil with high precision, repeatability and production efficiency. We manufacture complete lines according to customer profile drawings, production targets and automation requirements. From standard profiles to fully customized sections, Bosporas provides turnkey roll forming solutions including coil feeding, punching, forming, cutting, stacking and automation systems. The systems can be equipped with advanced technologies such as quick cassette change, flexible punching systems, automatic width adjustment and servo-controlled feeding solutions. ⚙️ PROFILE TYPES & INDUSTRIES We manufacture roll forming lines for a wide range of industries and applications, including: Highway Guardrail Production Lines Acoustic Noise Barrier Production Lines Solar Framing & Mounting Profiles C, U and Z Profiles Cable Tray & Cable Ladder Profiles Logistic Warehouse Traverse Profiles Market Shelving Systems Suspended Metal Ceiling Profiles Solar Framing & Mounting Profiles Lighting Fixture Body & Lid Profiles Panel Radiator Top & Side Covers Metal Grid & Industrial Profiles Metal Door & Door Frame Profiles PVC Window & Gypsum Board Profiles Vineyard / Orchard Posts Agricultural Equipment Components Automotive Industry Components Painting Plant Panel Profiles Household Appliance Components Coil Punching Applications Customized Special Profiles ⚙️ ENGINEERING FEATURES Custom machine design based on profile drawing High precision roll tooling design Servo-controlled feeding systems Quick cassette change options Automatic width adjustment options Flexible punching and perforation solutions Heavy-duty machine construction Modular design for future upgrades ⚡ OPERATIONAL ADVANTAGES Complete turnkey production solutions High efficiency serial production from coil Consistent product quality Reduced labor and production costs Flexible solutions for different industries Short lead time compared to European manufacturers 🏭 APPLICATION AREAS Construction industry Storage & logistics systems Solar energy sector Agriculture sector Automotive suppliers White goods industry Metal furniture systems Infrastructure projects General sheet metal manufacturing 🧩 OPTIONAL CONFIGURATIONS Djdpfxjy Anxaj Aa Nekl Fully customized profile design High-speed punching systems Automatic width adjustment Quick cassette change systems Special tooling packages Turnkey factory integration solutions

Condition: used, Technical data turn table wrapping line with top sheet despenser for fully automatic, watertight packaging of palletised goods Manufacturer UNITECH S.r.l., Via Buscaglia, 10 - 27029 VIGEVANO, Italia Typ UNIWRAP 200 AE Year of construction 2007 Throughput capacity approx. 30 pallets per hour Connected load 7,5 kW Weight 3,700 kg Stretch films, roll diameter 300 mm Roll height 500 up to 750 mm Core diameter 76 mm Film thickness 15 to 35 micron Roll weight 25 kg Top cover PE film, roll diameter 250 mm Core diameter 76 mm PE film roll width max. 1,700 mm PE film thickness 60 to 100 micron PLC Siemens Simatic S7-200 PLC panel Siemens OP 77A Installation dimensions Wrappinmg unit 3,400 x 3,100 x 3,900 mm (l x w x h) Dimensions roller conveyor 10,000 x 1,150 x 570 mm (l x w x h) Descreption: Dsdpfxsu Tg Nne Aa Nokl The Uniwrap 200 AE is a robust build stretch wrapping machine made of high quality components delivering reliability in the long term, which minimises maintenance costs. The use of the latest technologies provide total control over the pressure applied by the stretch film over the product, the pre-stretch ratio and the packaging overall holding force. The Uniwrap 200 AE includes a top-sheet applicator, programmable to client's requirements. Condition: The entire stretch wrapping line is still assembled, in really good condition, ready for immediate operation and can be inspected in operation on site. Comments: The documentation (Manual, CE-declaration, electr./hydr.-drawings), are completely available. Inspections are possible after agreement. We will not assume liability for the given technical data and possible errors.

Year of construction: 2013, condition: used, Technical data of the bale opener line for RDF. MSW, paper, cardboard: Manufacturer Cross Wrap Oy Ltd, Siilinjärvi, Finland Type BO 4000 Year of manufacture 2015 Quantity of opened bales 674 pieces Operating time only 3 days, exclusively by running in the entire line during new installation Opening time approx. 45 seconds per bale Bale dimensions (W x H x L) 1100 x 1100 x 1400 - 1900 mm Max. Bale weight 2,000 kg Conveying height of the system 1,400 mm Max. Conveying width of the system 1,200 mm Material to be opened RDF/MSW Availability of the line 98% Noise level of the bale opener line 85 dB(A) Total connected load 37 kW Rated current 125 A Operating display SIEMENS SIMATIC HMI Touch Control SIEMENS S7 ET200S Installation dimensions 8,463 x 2,890 x 3,960 mm (l x w x h) Scope of delivery: Feed conveyor 3,500 x 1,200 x 1,400 mm Feed conveyor to opener 1,500 x 1,200 x 1,400 mm Bale opener (gripper with knife) Special equipment: Oil heating in hydraulic oil tank Heating in control cabinet Oil cooler in Hydraulic unit Explanation of the short period of use: The entire line of Cross Wrap bale openers type BO 4000 was installed at a municipal waste incineration plant in 2015. The background to the installation was that in the case of a malfunction or maintenance of the incinerator, the municipal waste could continue to be received, baled, wrapped and stored until the malfunction was cleared. Then the bales should all be opened again and the waste fed into the normal incineration process. This worst-case scenario never came to pass. The plant was set up, run in and then never used in regular operation. Only during the commissioning and running-in of the entire plant in 2015 were 674 bales opened on three days. The plant is in very good condition and ready for operation immediately. Due to reconstruction measures in the incineration plant, the installation area of the bale opener was needed. As a result, the entire line is for sale. Short description of the wrapping process: Dkedeu Tg I Djpfx Aa Nol The pressed bales are placed on the infeed conveyor belt from the side or from behind by means of a forklift truck. For opening, the bales must run horizontally to the conveyor belt with the wire or twine binding, otherwise the bales must be turned 90° beforehand. The opening conveyor brings one bale at a time in front of the cutting unit. The grippers hold the wires or twine strapping. The front and rear rotating knives slit the bale lengthwise. Afterwards, the gripper returns to the starting position. The opened bale is now conveyed via the conveyor belt to the discharge chute and then falls onto the following conveyor system. Comments: New price of the completely plant 296.000,- €. The documentation (operating instructions, CE declaration, electrical/hydraulic circuit diagram) is complete. The unit has been dismantled into freight-manageable units, stored and is available for inspection and loading at short notice. We do not accept any liability for the technical details or any errors.

Condition: ready for operation (used), Complete Veneer production line. Capacity produced veneer: 8 to 10 m3 per hour Dimension veneer sheets: Length 2.62 m, Minimum width 0.5 meter Max diameter: 62 cm Max log length: 6 meter ( Longer logs if re-building the log intake ) Main parts: - Logintake with debarker and butt-end reducer Dkjdpjtryf Iofx Aa Nsl - Veneer peeling system - Dryer for veneer - Conveyor system for quality sorting with stacking units - Chippers for chipping off-cuts

Year of construction: 2019, condition: used, functionality: fully functional, Used decorative galvanizing line NICKEL CHROME The line consists of 19 tanks with dimensions 3m x 1.2m x 1.4m (4.5 tons) 1 dryer with 2 motors 2 transformers 12V–15V, 1200A 1 transformer 12V–15V, 4000A 1 oil transformer 2 pumps with voltage of 400V (three-phase) and power of 1.5 kW Included with the galvanizing line is a plant for DEMI water production. If needed, we can also offer a water treatment (purification) line. Djdpfjy Hcmtsx Aa Nskl

Condition: used, The CAT 500 cutting center is an automatic machine designed for cutting PVC profiles using a circular saw. The numerical control unit, together with the management software, allows the programming of machining parameters, leaving the operator with the sole task of loading the bars and unloading the finished pieces. Cutting type: 45° / 90° cutting (left) Adjustable angle cutting Blade specifications: Bore: Ø 30 mm Diameter: Ø 500 mm Speed: 3000 rpm Max thickness: 4.2 mm Technical data: Voltage: 380–400 V AC3PE Current: 8 A Frequency: 50 Hz Dedpfxey I Twfo Aa Nokl Power: 3.8 kW Air pressure: 7 bar Weight: 2300 kg Standard accessories: Carbide blade Ø 500 mm (Ø30 bore) Electro-welded steel structure with leveling feet and floor anchoring Industrial PC on board the machine Motorized profile pusher with brushless motor Motorized blade rotation (left) with brushless motor Feeding belts with inverter and acceleration/deceleration ramps Label printer Dimensions: Loader: 7900 mm MC: 1000 mm Unloading: 2600 mm Pusher: 6500 mm Max width: 2300 mm Max height: 1700 mm

Condition: used, Year of construction: 2022, functionality: fully functional, machine/vehicle number: MJY 142S-35, MJF 143-1535, MJY-MJF production line from the Chinese manufacturer China SHENGONG. The equipment was commissioned in 11/2022 and is designed for processing round logs with a maximum diameter of 340 mm and length of 5 m. The technology comprises: - Log infeed deck for 5 m logs with dosing and centering - Infeed conveyor to the machine - Double-shaft canting saw MJY 142S-35 - Outfeed pressure rollers - Distribution outfeed conveyor for cant and side boards - Side boards conveyor - Cant conveyor with lateral ejection and flipping - Cant conveyor to multi-rip saw - Centering unit before multi-rip saw - Double-shaft multi-rip saw MJF 143-1535 - Lumber conveyor behind the saw - Side chains and lumber conveyor - Edging saw MJ 141-0440 with 5 lasers for saw blade positioning - Roller conveyor before and after the edger - Belt conveyor under the Multipris for offcut removal - Connecting belt conveyor - Belt conveyor under the multi-rip saw for offcut removal to chipping - Belt conveyor for removal from the hall Dodpow Rg Emsfx Aa Njkl - Chutes and conveyor connections - Accessories: hydraulics, electrics, and control system The price of the technology is without dismantling and at FCA Nepomuk Incoterms.

Condition: used, Year of construction: 2017, operating hours: 19,500 h, machine/vehicle number: LC621, Used tetra Pack A3 speed 200 ml Prisma line for UHTTechnical Specifications & Performance DataThis used bottling line is a complete Tetra Pak A3/Speed V040 filling solution configured for 200 ml Prisma cartons. It is a second hand, industrial packaging line designed for high-quality beverage production with integrated downstream packing and date coding. The package also includes a comprehensive UHT processing block to support aseptic filling operations.Main filler: Tetra Pak A3/Speed V040 (carton filling technology)Primary format: 200 ml Prisma cartonsSpeed: 24.000 BPH ( 200 ml Prisma).Accumulator: Tetra HELIX ACHX30-0700-100MLine control: Tetra Pak Line Controller 30 PLUSStraw application: Tetra Pak Straw ApplicatorConveyors: Complete Tetra Pak conveyor systemPacking – wrap around: GAMPACK WB90HSPacking – case/carton: GAMPACK case packerDate coding: Domino date printerWorking hours: 19,500 (line)Included UHT process equipment:Tetra Pak Homogenizer 400Cooling tank 2,000 LTetra Pak Aseptic Tank 30,720 L with Tetra AlsafeComplete Tetra Pak VTIS UHT processing unit (pumps, valves, heat exchangers)Tetra Pak CIP satelliteAdvanced Automation & Control SystemsThe line is coordinated via the Tetra Pak Line Controller 30 PLUS, ensuring synchronized operation from filling through secondary packaging. Integrated automation supports stable product flow using the Tetra HELIX accumulator, while the Domino printer provides in-line date coding. System-wide interlocks and operator control points contribute to efficient, repeatable changeovers and robust process control suitable for aseptic beverage packaging.Production Line Integration CapabilitiesEngineered for cohesive end-to-end operation, the line links the Tetra Pak A3/Speed V040 filler with straw application, conveyors, accumulation, and both wrap around and case packing. The configuration facilitates smooth transitions between unit operations for stable throughput. It is purpose-built for 200 ml Prisma cartons and integrates easily into existing industrial packaging layouts for beverage production, whether as a standalone carton line or connected to upstream processing utilities.Machine Condition & Maintenance HistoryThis second hand Tetra Pak A3/Speed V040 carton filling line shows 19,500 operating hours. Presented as a complete used bottling line package with downstream packing and UHT processing equipment, it is suitable for facilities seeking proven, production-ready carton packaging machinery.Operational Performance & VersatilityDesigned for aseptic carton packaging, the system supports UHT-treated beverages, leveraging the VTIS UHT unit, homogenization, aseptic storage, and CIP for hygienic integrity. The straw applicator complements the 200 ml Prisma format for on-the-go consumption. Downstream GAMPACK wrap around and case packing provides flexible secondary packaging options, and the Domino date printer ensures... Dkedpfxey Egm Io Aa Nsl

Condition: used, machine/vehicle number: LC608, Used Glass bottling line for ciders 32.000 BPHTechnical Specifications & Performance DataThis complete used bottling line for glass bottles is configured for crown‑capped beverage production and industrial packaging. It combines inspection, rinsing, filling, labeling, packaging, and end-of-line palletizing into a robust second hand solution for beverage production.Depalletizer: Kettner Pressant Universal (1N), 5 layers/minEmpty Bottle Inspector (EBI): Krones Linatronic 731 M2, 700 bottles/minRinsing Machine: CBI JetMatic, 72 heads, 670 bottles/minFilling/Crowning Monoblock: O & H Hansa Ref C2932B 03, 600–660 bottles/min, 80/14 headsBottle Inspector 1: Heuft Spectrum TXBottle Warmer: CBI MCC 2000Labeling Machine: Krones (Renner) Topmatic Type 071, 850 bottles/minBottle Inspector 2: Heuft Spectrum TXShrink Wrapper (Over‑wrapper): SMI SK 800F, 160 packs/minWrap Around Packer: SMI WP 450, 45 cases/minCase Divider: CBIPalletizer: Berchi Dinamatic PTF/2Pallet Wrapper: Robopac Helix HS 30, 30 pallets/hourPallet Coder: Logopak LOGOConveyors + Controls: CBI bottle conveyors and controls; CBI case conveyors; CBI pallet conveyorsCase Scales: John White & Son Cartomat 2Carton Coder: Videojet Excel 100Bottle Dryers/Blowers: Jetair Jet‑2; Sonic 150Chillers: Geoclima 2 x TMA 2A450A EC‑34Container type: Designed for Glass bottle handlingLine speed (bottling): up to 850 bottles/min (limited by downstream configuration)Advanced Automation & Control SystemsThe line integrates centralized controls across depalletizing, inspection, rinsing, filling, labeling, and packaging. Automation-ready subsystems support stable speeds from 160 packs/min on the shrink wrapper to 850 bottles/min on labeling, with efficient changeovers between operations. Safety interlocks, emergency stops, and guarding around rotating and motion systems enhance operator protection and reliable beverage production.Coordinated conveyor logic and accumulation for smooth product flowAutomated inspection (EBI and post‑label checks) for quality assuranceControlled thermal management via bottle warmer for condensation mitigationPallet coding and carton coding integrated for end‑of‑line traceabilityProduction Line Integration CapabilitiesThis used bottling line is engineered for inline operation from depalletizer through pallet wrapper, with modular stations for easy reconfiguration. The conveyor and control system by CBI provides balanced buffering between processes to maintain bottle integrity and consistent throughput. Suitable for a range of crown‑capped glass bottle applications in industrial packaging and beverage production.In... Dkedpsy Ef Ttefx Aa Nsl

Condition: excellent (used), Year of construction: 2020, operating hours: 14,000 h, functionality: fully functional, machine/vehicle number: 3294, type of input current: three-phase, power: 90 kW (122.37 HP), input voltage: 400 V, We are selling press line from Nova pellet, 2019 production and 2020 first year of production start. -Pellet press N-MIDI 90 KW 14.000 hrs(very good and daily maintaince, 2026 new rollers and die)-2019 year -Transporting vertical elevator ca 10m height-2019 year -Cooling tower N-CO700-2019 year -Control cabinet-NEW UNUSED For aditional price we are selling heavy duty hammermill Miller M16(37kW electric engine)-NEW UNUSED-25.000€ netto Dsdpfewahhcsx Aa Nekl We are selling only items above(without cyklon, filters etc.)! Line is in very good condition and had very good daily maintaince. For further informations, please write or call on our contact.

Condition: used, machine/vehicle number: 005989, Max length workable: 1500 mm Dsdpfx Aaowucl Sj Njkl

Condition: excellent (used), Year of construction: 2006, I sell the complete line for production of solid wood panels. Manufacturer: KALLESOE MACHINERY AS Modell: LHF6114 + KL30 Maximum possible input length: 1800mm Dkjdpfxsyw Aics Aa Nol Press width maximum 525mm (useful between appr. 480-520mm) Minimum and maximum slat width: max. 35mm x 80mm and 16mm x 135mm Glue: Danafix 446 Maximum possible output length: 1800 mm - 6000 mm Available immediately. Possible to test.

Condition: excellent (used), Year of construction: 2010, I sell the complete line for production of solid wood panels. Manufacturer: KALLESOE MACHINERY AS Modell: LHF6114 + KL30 + STACKER Maximum possible input length: 1800mm Press width maximum 525mm (useful between appr. 480-520mm) Minimum and maximum slat width: max. 35mm x 80mm and 16mm x 155mm Glue: Danafix 446 Dedpfx Aasw Anc Es Njkl Maximum possible output length: 1800 mm - 6000 mm Available immediately. Possible to test.

Condition: excellent (used), Year of construction: 2012, I sell the complete line for production of solid wood panels. Manufacturer: KALLESOE MACHINERY AS Modell: LHF6114 + KL30 Maximum possible input length: 1800mm Press width maximum 525mm (useful between appr. 480-520mm) Minimum and maximum slat width: max. 35mm x 80mm and 16mm x 135mm Dkodpfsvw Eh Nox Aa Nol Glue: Danafix 446 Maximum possible output length: 1800 mm - 6000 mm Available immediately. Possible to test.

Condition: used, Used machine Used row drilling machine of the company Ganner type RB 107 serial no.: 121627 Motor power: 1,5 kW Dkedpew I Unwjfx Aa Njl Motor speed: 2800 rpm 1 drill beam with 26 spindles, center distance 32 mm 3 hold-down devices 1 foot switch Availability: short term Location: Röllbach

Condition: used, Minced Meat Production Line, Including: 2ea Mixing Elevator, Maker AMFEC, Model 15-C & 2-3K; Dkedpfx Aajyhm Naj Nol 1ea Mixer, Maker AMFEC, Model 510; 1ea Screw Feeder, Maker AMFEC, Model 610; 1ea Vacuum Filling Machine, Maker VEMAG, Model HP25E, Year 2020; Portioning Machine, Maker VEMAG, Model MMP223, Year 2020; Plating Machine, Maker VEMAG, Model MLR380, Year 2020; Conveyor and Inkjet Printer

Condition: used, Extrusion Line, Including: Dkedpoyhm Ebjfx Aa Njl 2ea Mixer, Maker Jiangyin Brightsail Machinery, Model BSR-5000, Year 2020; Barrel volume 5000L, Power 30kW, Work volume 3000L; to include 2 units of Vacuum feeding machine, Maker Jiangyin Brightsail Machinery, Model ZKS-7, Year 2020; Capacity 4000kg/hr, Power 7.75kW; to include Platform; 1ea Small Mixer; 1ea Vibrating Screen, Maker Local, Model 800-IS, Year 2021; Power 0.55kW, Vibration frequency 1440, Amplitude; 1 unit of Feeding System, Maker Coperion K-TRON, Year 2020; to include stainless steel bracket; 1ea Extruder, Maker Coperion, Model ZSK, Year 2020; to include 1ea Water dispenser and 2ea Screw shaft; to include Screw shaft puller; 1ea Cutter, Maker Urschel, Model 3600F; 2ea Unused Temperature Controller, Maker REGLOPLAS; 1ea PSD Vibrating Screen, Maker TYLER, Model RX-30-10, Year 2021; 1ea LN2 Freezer, Maker CES, Model CES-TF-LIN-30FTX50IN-PLC, Year 2020; Weight 6000kg, Power 9kW;