Used Automatic Rigid Box Making Machine for sale (84,421)

Condition: used, machine/vehicle number: 008606, Max. panel width: 3200 mm Max. panel length: 1000 mm No of Bottom Units: 5 No of Top Units: 2 Ndedpfxezqz Rce Aiyea Positioning of Units by NC: yes Lateral horizontal groups: yes

Condition: used, machine/vehicle number: 008607, Max. panel width: 3200 mm Max. panel length: 1000 mm No of Bottom Units: 6 Nodezqz N Eepfx Aiyeda No of Top Units: 4 Lateral horizontal groups: yes

Condition: excellent (used), Year of construction: 2011, Fully automatic Rösler dual-stream cleaning system, automated with industrial robots, cleaning chambers with 2 blowers each, each with 2 loading/unloading containers, year of manufacture 2011, including a wet separator. Nodpfx Aszb Dqhsiyoda

Condition: used, Gehrungs cold-cut circular saw machine MEP Type Tiger 350 CNC FE Factory No. 00011818 Year of manufacture 1995 Cutting range at 90° round: Ø 115 mm Cutting range at 90° rectangle: 180 x 95 mm Cutting range at 45° round: Ø 110 mm Cutting range at 45° rectangle: 125 x 95 mm Cutting range at 30° round: Ø 90 mm Cutting range at 30° rectangle: 90 x 95 mm Cutting range round: Ø 120 mm Rectangle: 180 x 100 mm Vise opening: max. 185 mm Saw blade diameter: 350 mm Miter cut: 60° left to 45° right Saw blade speed: 15 / 30 / 45 and 90 rpm Motor power: 1.8 and 2.6 kW Mains connection: 400 Volt, 50 Hz Compressed air requirement: 6 bar - CNC control for up to 80 different cut lengths with corresponding quantities ???? Ndodezrpl Dopfx Aiysa - CNC control, cut length and quantity programmable - hydro-pneumatic saw head lowering - pneumatic material clamping - pneumatic material support - jaw feed with servo drive and ball screw - feed stroke programmable up to 9999 mm - 2 gear stages and 2 motor speeds - coolant system in the machine stand Space requirement L x W x H: 2000 x 1100 x 2030 mm Weight: 650 kg Good condition

Year of construction: 2024, condition: used, machine/vehicle number: 234920805040, fully automatic Ndsdpszv Rrgjfx Aiyea

Condition: like new (used), functionality: fully functional, mileage: 1,45,000 km, power: 140 kW (190.35 HP), first registration: 04/2023, fuel type: diesel, empty load weight: 5,290 kg, maximum load weight: 2,200 kg, overall weight: 7,490 kg, tire condition: 80 %, axle configuration: 2 axles, wheelbase: 4,200 mm, axle spacing: 4,200 mm, fuel: diesel, fuel tank capacity: 100 l, fuel consumption (extra-urban): 15.4 l/100km, brakes: engine braking, color: white, driver cabin: day cab, gearing type: automatic, number of gears: 6, emission class: euro6e, suspension: steel-air, number of seats: 3, total length: 8,000 mm, total width: 2,550 mm, total height: 3,500 mm, permissible axle load (axle 1): 3,600 kg, permissible axle load (axle 2): 5,200 kg, loading space volume: 36 m³, loading space length: 6,050 mm, loading space width: 2,480 mm, loading space height: 2,350 mm, Year of construction: 2023, Equipment: ABS, AdBlue, Bluetooth, EBS, USB port, air conditioning, airbag, central locking, cruise control, differential lock, electric window regulation, electronic stability program (ESP), full service history, hill-start assist, lane keeping assist, non-smoking vehicle, onboard computer, power assisted steering, power mirror, soot filter, spoiler, tachograph, tail-lift, traction control, trailer coupling, truck registration, Location: Street 9, No. 33-35, 12309 Berlin-Lichtenrade (see last picture) MOT / Technical Inspection – NEW Model: MAN 3 Automatic / Tipmatic, 6-speed Leaf spring and air suspension Nodpfx Aozl Hyxoiysda Trailer hitch Air conditioning Double bench seat, 3 seats Electric windows Electrically adjustable, heated exterior mirrors MAN Media Truck Central locking system MAN BrakeMatic MAN Easy Start, hill-start assist Lane keeping assist LED daytime running lights Trade-in possible Delivery possible

Condition: new, Sand Gravel Fabrication Plant: Essential Solution for Modern Construction Needs In the construction and infrastructure industry, high-quality sand and gravel are critical raw materials for creating concrete, asphalt, and other foundational elements. A Sand Gravel Fabrication Plant is the cornerstone of producing these materials efficiently and at scale. With advanced technology, versatility, and scalability, these plants cater to a wide range of projects, ensuring consistent quality and meeting the growing demand for construction materials. This article explores the general introduction, features, and applications of sand gravel fabrication plants, including both stationary and mobile systems. General Introduction to Sand Gravel Fabrication Plants A sand gravel fabrication plant is a specialized facility designed to process raw materials such as sand, gravel, and aggregates into construction-grade products. These plants combine various equipment, including crushers, screens, conveyors, washers, and storage units, to convert raw materials into ready-to-use aggregates. There are two primary types of sand gravel fabrication plants: Stationary Fabrication Plants: Fixed installations designed for high-capacity production. Ideal for large-scale operations and long-term projects. Mobile Sand Gravel Fabrication Plants: Portable systems that can be transported to different project sites. Perfect for temporary operations and projects in remote locations. Both types are equipped with advanced machinery and automation systems to ensure high efficiency, precision, and sustainability. Applications of Sand Gravel Fabrication Plants Sand gravel fabrication plants are indispensable across multiple industries due to their ability to produce high-quality aggregates. Key applications include: 1. Construction and Infrastructure Produces sand and gravel for concrete, asphalt, and base materials. Supports large-scale infrastructure projects such as highways, bridges, airports, and railways. 2. Residential and Commercial Development Supplies aggregates for building foundations, driveways, landscaping, and drainage systems. Plays a vital role in residential housing and commercial property construction. Ndjdpfxsvlwqls Aiysa 3. Road Construction Provides high-quality crushed stones and sand for roadbeds, pavements, and highways. Ensures durability and longevity of road surfaces. 4. Mining and Quarrying Efficiently processes mined materials into usable aggregates. Enhances productivity in quarrying operations with optimized material handling systems. 5. Environmental Restoration Supplies aggregates for erosion control, land reclamation, and shoreline protection projects. Facilitates sustainable environmental rehabilitation efforts. 6. Recycling of Construction Waste Mobile sand gravel fabrication plants are ideal for recycling concrete and asphalt. Converts waste materials into usable aggregates, reducing landfill burden and promoting sustainability. Stationary vs. Mobile Sand Gravel Fabrication Plants Stationary Fabrication Plants Best For: Long-term, large-scale projects and industrial operations. Advantages: High-capacity production. Robust and durable structures. Advanced automation for minimal manual intervention.

Condition: ready for operation (used), Year of construction: 1986, Available immediately from our location: Fully automatic milling machine, Busch Type NF 8/32 Year of manufacture 1986 Groove width up to 32 mm Processing length up to 6100 mm Automatic material feed Automatic feed Drive power 5.5 kW Accessories: Support table Clamping devices, milling cutters Coolant system Nodpfx Aszvv Sxjiyjda Digital display Weight 4 tons Price: EUR 2,500.00 plus VAT, ex works

Condition: ready for operation (used), Year of construction: 2016, functionality: fully functional, workpiece height (max.): 60 mm, roll diameter: 830 mm, The dismantling is scheduled for calendar week 35. Until then, the buyer can inspect the system while it is in operation in Lithuania. Fully automatic edge banding line with the following machines: HOMAG PROFI KAL330/9/A3/WZ (year of manufacture 2013) HOMAG PROFI KAL370/8/A3/WZ (year of manufacture 2016) HOMAG PROFI TBL100/20/30/F infeed table (year of manufacture 2013) HOMAG POWER TWL410/25/LQ transfer system cross conveyor (year of manufacture 2016) TECHNICAL DETAILS Edge banding machines HOMAG PROFI KAL330/9/A3/WZ & PROFI KAL370/8/A3/WZ Workpiece width without edge, with workpiece thickness of 12–22 mm: min. 60 mm (depending on workpiece length) Workpiece width without edge, with workpiece thickness of 23–60 mm: min. 100 mm (depending on workpiece length) Workpiece overhang: 30 mm Workpiece thickness: 12–60 mm Edge height: max. workpiece thickness + 4 mm Edge material on roll: 0.3–3 mm Edge material height PVC: max. 135 mm Edge material height veneer: max. 100 mm Roll diameter: max. 830 mm HOMAG PROFI TBL100/20/30/F infeed table Roller diameter: 54 mm Roller spacing: approx. 60 mm Panel length: 240–2,500 mm Panel width: 120–3,000 mm HOMAG POWER TWL410/25/LQ transfer system cross conveyor Roller diameter: 64 mm Roller spacing: 110 mm Panel length: 240–2,500 mm Panel width: min. 240 mm Panel thickness: 8–60 mm Panel weight: max. 80 kg EQUIPMENT Gap-free joining-cutting unit on both edge banding machines A3 basic gluing unit on both edge banding machines Gap-free processing units on both edge banding machines FA11 finishing unit on the HOMAG PROFI KAL330 FA21 finishing unit on the HOMAG PROFI KAL370 Fixed stop on the left side of the infeed table Transport rollers on the infeed table Lateral conveyor belt on the infeed table Electropneumatically controlled transverse safety device on the infeed table Manually adjustable infeed safety device Set for small parts Integrated air cushion table Fixed stop on the left side at the infeed and outfeed of the transfer system cross conveyor Infeed roller track with conveyor belt and cross conveying Controlled cross conveyor at the infeed Outfeed roller track Controlled cross conveyor at the outfeed Nedpfx Aijztazfeyjda Electropneumatically controlled stop protection device Lateral transport belt Manually adjustable panel overhang

Condition: like new (used), Year of construction: 2023, functionality: fully functional, total height: 5,300 mm, ram adjustment: 150 mm, installation height: 570 mm, total width: 3,300 mm, total length: 5,250 mm, pressing force: 250 t, type of input current: three-phase, stroke length: 35 mm, input voltage: 400 V, distance between side stands: 820 mm, overall weight: 58,000 kg, control voltage: 24 V, input frequency: 50 Hz, HR 250/2200 SL – Punching Line (Demonstration and Trial System) Press frame + ram in cast design with optimal damping properties Turnkey complete system for: • Production of electrical sheet metal parts • Flat stamped parts • Flat progressive die-cut parts EQUIPMENT + ACCESSORIES: • Punching machine HR 250/2200 SL [ZEULENRODA] 2,500 kN | Stroke rate 80…250 min-¹ >also available without accessories/peripherals upon request< • Roller feed “push-pull”, [ZEHNDER & SOMMER] • RAZIOL roller strip lubricator • Strip thickness measuring device • Punching package control [UNIDOR / TRsystems] • Unwinding reel 3.0t [KOHLER] • 21-roll fine leveling machine, deburring attachment [KOHLER] • Motorized tool changing system with hydraulic lifting bars + insertion clamp • Scrap and parts removal • Servo punching shear • Control cabinet platform • Operator platform • Soundproof cabin • Safety fence TECHNICAL DESIGN: Stroke rate of the press: 80 - 250 min-¹ Ram stroke: 35 mm Quick lift: 75 mm Installed height: 570 mm at max. stroke (fixed 35 mm) at the bottom, ram adjustment (150 mm) at the top Table surface: 2300 x 1100 mm Clamping plate: 2300 x 1100 mm T-slots DIN 650: 22 mm Table opening: 2020 x 400 mm Ndedezu Ryhopfx Aiyja Ram surface: 2240 x 900 mm Ram stroke, fixed: 35 mm Quick lift: 75 mm Height above floor: 1380 mm (including clamping plate 200 mm) Strip inlet height: 200 - 400 mm (above the clamping plate) Stand opening, side: 820 x 500 mm (W x H) Recommended max. upper tool weight: 2200 kg Recommended upper tool weight: 1950 kg - Control system SIEMENS S7-1500 - 15’’ touch panel + two-hand control panel - Remote maintenance DESCRIPTION: - Press frame in gray cast iron design - Press ram in cast design - Direct drive with electro-pneumatic clutch-brake combination - Fully eccentric two-point eccentric shaft, forged - Power transmission via two connecting rod joints - Roller guide, 8-fold for precise ram guidance - Rotating mass balancer - Ram weight compensation by means of pneumatic bellows cylinder - Quick Lift 75 mm (quick lift function for fast tool access) - Condition monitoring (forces, temperatures, lubrication, pneumatics)

Year of construction: 2015, condition: excellent (used), PLASTIC BAGS MAKING MACHINE VAMA VC 600 Germany made in 2015. Technical data Manufacturer: VAMA GmbH Model: VC 600 Production year: 2015 Technical parameters The width of the film maximum: 600 mm The maximum length of the bag: 1200 mm Film thickness: 25-80 μm weld Capacity: 60 - 90 bags per minute Rolling rollers 2 with roll diameter: 700 mm Stacking position: 25-50 pieces Machine for the production of plastic bags Excellent condition, located in Poland Ndsdpfx Aijg D Arneyja

Condition: ready for operation (used), Year of construction: 2005, functionality: fully functional, machine/vehicle number: 325, overall weight: 350 kg, fuel type: electric, color: white, total length: 4,000 mm, total width: 1,000 mm, total height: 1,550 mm, PSA HSA2500 semi-automatic sleeve cutting system for cardboard sleeves Features: Manual sleeve loading Automatic clamping Automatic feed Nodpfx Aoy Nyb Tsiyeda Automatic length measurement Automatic cutting process PLC control with display Storage of up to 50 different sleeve lengths and 3 quantity settings Suitable for: Paper sleeves and plastic sleeves with a diameter of 50 to 200 mm Maximum sleeve length: 2500 mm The system is equipped with a 76 mm spindle.

Year of construction: 1995, condition: good (used), The bender can bend aluminum and plastic, Total length: approx. 11500 mm, depth: 1600 mm. Nsdpfx Aierif U Eoyeda

Condition: good (used), Year of construction: 2003, System with water basin and pumps, Nedpfx Aiot Ah Acjyeda Total depth with water basin 1400 mm Total length: 8100 mm, Height: 2500 mm, Working direction: right to left

Condition: new, Year of construction: 2026, Metal Cutting Band Saw CORMAK S-200RH The CORMAK S-200RH metal cutting band saw is a modern semi-automatic band saw designed for intensive operation in the metalworking industry. It enables cutting at angles from -45° to +60°, providing high precision, repeatability, and efficiency even when processing heavy sections. The machine combines precise blade guidance with automation of key functions, including hydraulic arm lifting/lowering and hydraulic vice control. Main advantages of the machine Nsdsi D D A Sjpfx Aiyoda Hydraulic arm movement control (up/down) with smooth adjustment of lowering speed. Arm position memory function – automatic return to a predefined height. Swivelling saw arm from -45° to +60° with a clear angle scale. Hydraulic quick-clamping vice – suitable for cutting profiles and solid materials. Heavy cast iron saw arm – ensures rigidity and operational stability. Efficient coolant pump with closed-loop cooling system. CE safety system – including limit switches and emergency stop button. Construction and technology The band saw is built on a stable steel base with an integrated hydraulic unit and coolant tank. The saw arm is made from a single-piece cast iron construction, providing high resistance to vibration and twisting, which directly improves cutting quality. The blade guides are equipped with carbide inserts and roller bearings, ensuring accurate alignment and straight cutting of processed materials. A high-performance ABB M3V series motor and worm gear transmission provide two cutting speeds for optimal adaptation to different materials. Precision and work efficiency The machine enables fast and repeatable cutting of pipes, profiles, and solid materials, including very small sections starting from Ø5 mm. Automation of the cutting process (arm movement and hydraulic vice operation) significantly reduces operating time and minimizes operator involvement. The integrated blade cleaning brush maintains proper working conditions and extends blade service life. Applications The CORMAK S-200RH model is designed for: production workshops, steel construction plants, machine manufacturing industries, maintenance departments. It is particularly suitable as a band saw for pipes and profiles in serial production and applications requiring high cutting accuracy and repeatability. Standard equipment Control console mounted on a separate pedestal Integrated hydraulic power unit Hydraulic vice Automatic arm lifting and lowering with position memory function Blade cleaning brush Coolant system with pump Bimetallic band saw blade Technical documentation (DTR) and CE declaration of conformity Optional equipment Material feeding rollers Laser cutting line guidance system Extended cutting length measurement system Semi-Automatic Metal Cutting Band Saw CORMAK S200RH Technical data Parameter Value Machine type Semi-automatic band saw Arm lifting and lowering Hydraulic, smooth adjustment Blade speed 36 / 70 m/min Angular cutting range -45° to +60° Vice Hydraulic Minimum cutting diameter Ø5 mm Minimum material length in vice 30 mm Vice base height 780 mm Cutting blade dimensions 27 × 0.9 × 2910 mm Total motor power 2.1 kW Machine dimensions (L × W × H) 1600 × 800 × 1400 mm Weight 530 kg

Year of construction: 2016, condition: used, functionality: fully functional, machine/vehicle number: 36316, Carousel packaging and filling machine with three filling nozzles, designed for automated filling and sealing of cups. Njdpozua Nrjfx Aiyjda The machine ensures a complete process: - automatic cup feeding - filling using 3 filling nozzles - placing and heat-sealing of the lid film - automatic lid placement - discharge of the finished, sealed product The machine is equipped with a product transfer device with a CLAMP/DN32 connection. Suitable for food production and other operations using cup filling.

Year of construction: 2015, condition: ready for operation (used), This is an inclined wire paper machine for the production of filter nonwovens, filter paper, insulation paper, membrane carriers, cardboard, tablecloths and more, speed: 5-120m/min, flow rate: 2500-20,000l/min, the manufacturers are various companies from Canada, Ukraine and Europe, some modifications have been made to the system such as a new shredder, larger vacuum pump, vibrating screen for water treatment, second headbox, new distributor and more, an inspection is possible. Ndedeqzyaxopfx Aiyea

Year of construction: 2011, condition: ready for operation (used), Max. working length: 2000mm, compressed air supply: 6bar, connected load: 1200W, the machine was hardly used. Nsdpfx Aolc N Spsiysda

Condition: good (used), Autobond Mini 105 TPH-RU-SAB-VS Automatic Laminating Machine The most efficient machine on the market from a legendary manufacturer. This advanced machine boasts high performance thanks to an external heating thermostat. Made in Great Britain. Technical specifications: Max sheet size: 1060mm x 1060mm Min sheet size: 320mm x 285mm Min grammage: 115 gsm Ndodpfx Ajzlac Tjiyea Max grammage: 650 gsm Operating temperature: 80-135°C Max operating speed: 120m/min Weight: approx. 4500 kg 380V power supply Additional 8 bar air supply Large-diameter, chrome-plated steel cylinder, filled with water for greater stability. Double-sided laminating Pneumatic clamping, separation, and automatic feeding. Adjustable pressure. High-stack feeding, Heidelberg Speedmaster feed head. Expansion roller for film fixing. Sheet straightening module. Stacker for sheet removal. The machine can operate in pallet-to-pallet or pallet-to-roll configurations. Two independent heating systems for two rollers, and a water-based sheet cooling system via rollers.

Condition: good (used), Horizon AFC-546 AKT Folding Machine Fully operational, ready for production. The machine is from the first owner. Very good condition. Rollers recently refurbished. Manufactured by Horizon, Japan Equipment: Nsdpfx Aiozlacyeyjda 6 parallel cassettes 1 electronic knife 2 knife cassettes Maximum format: 540x760mm; min. 120x172mm The machine is set up entirely using a touchscreen control panel. The kit includes: – tool kit – additional components – user manual – compressor

Condition: good (used), Year of construction: 2017, Automatic cardboard strapping machine, Mosca, SoniXs-TR6 Pro – used: Price ex works: only €9,500.00 (net) ex works! Manufacturer: Mosca Type: SoniXs-TR6 Pro Year of manufacture: 2017 Machine number: 112921 1L+N+PE, 50-60Hz, 100-240V, 3.00 - 1.25 A, max. 16 A Condition: good Available: from approximately the end of October 2026 Nedpfx Aiezpf H Ejyjda Location: Erfurt area

Condition: used, machine/vehicle number: 008692, Max. panel width: 3000 mm Nedpfx Aijznkqmoyeda Max. panel length: 1300 mm No of Top Units: 1 No of injectors: 1 Positioning of Units by NC: yes

Condition: used, Year of construction: 1987, functionality: fully functional, shaft length under head: 160 mm, thread length: 85 mm, total width: 2,800 mm, total length: 7,800 mm, bar diameter (max.): 16 mm, Machine is complete bolt making machine with pointing and threading. Nedpfxsztrpne Aiyjda

Condition: good (used), Year of construction: 2020, functionality: fully functional, Automatic strapping machine, Mosca, SoniXs-TR6 Pro – used: Price ex-works: only €17,500.00 (net) ex-works! Manufacturer: Mosca Type: SoniXs-TR6 Pro Year of manufacture: 2020 Machine number: 119645 With two rolls – the machine switches automatically when one roll is empty The machine is currently operating with 12 mm wide strapping band Designation: pp-120-055-bl/-1-g-200-2500 Ndjdpfxezpf Shs Aiysa Material: Polypropylene (PP) / Band width: 12.0 mm / Band thickness: 0.55 mm / Tensile strength: 120 kg / Core diameter: 200 mm / Run time/length: 2500 m Former new price: €36,461.00 1L+N+PE, 50-60Hz, 100-240V, 3.00 - 1.25 A, max. 16 A Price includes a partially used pallet of strapping band (see photo) and a small spare parts kit! Condition: good, used sparingly Available: immediately Location: Duderstadt

Condition: ready for operation (used), Year of construction: 2012, Machining length: 6500mm, equipment: fencing, control cabinet, Hagen & Göbel spindle unit, power: 5.5kW S1/7.9kW S6, speed range: 100 to 6000/min continuously variable, tool holder: SK30/DIN69871 form A, drilling capacity in steel 60/aluminium: 18/20mm, thread in steel 60/aluminium: M14/M16, spindle throat: 150mm, vertically opening protective cabin, pneumatically movable up and down, operation via push button, coolant system emulsion AP3000/6500, delivery rate: 70l/min, tank capacity: 150l, support table with T slot strips size 16, ten clamping cylinders, support surface: 6500x330mm, equipped with ten double acting pneumatic cylinders (50x40), tool changer plate magazine, travelling plate magazine for eight tools, change time: approx. 8 to 10s, max. tool holder diameter: 50mm, max. length for tool holder with tool: 250mm, Heidenhain HR130 handwheel integrated in control housing, chip tray, 6 removable chip drawers, pendulum operation for normal table, protection by light barrier, device for efficient production of series parts, machine table with separating discs for 900mm safety zone, spray mist device, tank capacity: approx. 1l, laser technology, retrofit AP6500 HK laser technology. Control: HEIDENHAIN iTNC530, length: 8000mm, width: 2400mm, height: 2450mm, weight: 4.5t, with documentation. An on site inspection is possible. Nsdpfxjzcfi Us Aiysda