Used Automatic Tyre Changer Machine for sale (82,040)

Condition: new, Year of construction: 2024, functionality: fully functional, Automatic Polishing Machine Sanyi SY-T200 year 2024 The SY-T200 is a closed internal circulation sandblasting machine designed for the surface treatment of hard alloy tool workpieces. It operates using a negative pressure jet blasting method, where compressed air draws in abrasive material to efficiently process surfaces. The machine features an independent dust extraction and filtration system that minimizes dust pollution and allows abrasive reuse, ensuring cost-effectiveness and environmental protection. Its structure includes a working chamber, rotating worktable, spray gun group with lifting mechanism, dust removal system, and electrical control unit. Itjdpfewcftbjx Adwob

Condition: good (used), TWQ-720RD Automatic Hot Foil Stamping Machine This machine is brand new. Very fast setup. Embossing and hot foil stamping capabilities, with two independent foil feeds. Servomotor control for fast and precise operation. Iedpfx Asx N D Ttedwstb Technical specifications: Maximum sheet size: 720x600mm Min. sheet size: 150x120mm Material weight: 120-2000g/m² Maximum throughput: 1200 sheets/h Power consumption: 13kW + compressed air Weight: 2000kg Foil feed: 1-550mm Operating temperature: 50-150°C Power supply: 380V Approximate machine dimensions: 270x160x220cm Equipment: – Control panel with touchscreen PLC – Two independent foil feeds, controlled by stepper motors – Sectional heating plate – Built-in compressor

Condition: good (used), Year of construction: 1998, functionality: fully functional, ram adjustment: 40 mm, installation height: 2,400 mm, total width: 17,000 mm, table length: 400 mm, table width: 400 mm, pressing force: 25 t, stroke adjustment: 17 mm, working width: 200 mm, overall weight: 2,500 kg, year of last overhaul: 2023, power: 0.003 kW (0.00 HP), Make: MABU Model: 25 VPR. Made in Germany. Max. Pressure: 250 [kN] (25 [T]). Speed range: 80-400 [spm]. Completely rebuilded Dec. 2023 Year of manufacture: 1998. Operating modes: Manual, One-cycle and Automatic. Equipped with two hand start and foot-clamp start. Fixed stroke: 17 [mm]. Ram adjustment: 40 [mm]. Max. Tool dimensions: 400 x 400 [mm]. Power: 3 [kw]. Current: 230 / 400 [V]. Air connection: 5.5 [bar]. Feeder: Silicon SFS 200 on left-hand side. Max. strip width: 200 [mm]. Machine dimensions: H 2350 x W 1700 x D 1400 [mm]. Weight of machine: cca. 2500 [kg]. Electrical cabinet with Mabu Pf 1.3 control. Front and rear safety guards with inspection glass. Iodpfjq Ikhpox Adwetb Technical documentation and operating instructions in English and German included. CE certificate and EUR-1 certificate of origin. On stock, tested and ready for delivery. More used machines from Mabu, Bruderer, Bihler and Schaal available on our stock for sale.

Condition: new, Year of construction: 2026, functionality: fully functional, machine/vehicle number: SÇ 403 Alüminyum Pvc Kesim Makinası, • Compliant with CE standards. • Used for cutting aluminum and PVC profiles. • Hydro-pneumatic cutting process. • Adjustable cutting speed according to the profile. • Capable of cutting at fixed angles: -60, -45, -30, -22.5, -15, 0, +15, +22.5, +30, +45, +60 degrees to the left and right. • Pneumatic vertical and horizontal press. • Ø600 or Ø650 mm diamond-tipped aluminum saw blade. • Equipped with roller conveyor (3 meters right and left). • Oil spray system. • Precision cutting possible thanks to 3 kW motor and Hydro-check. • Can operate with a digital measuring system. Itsdpjramrzofx Adweb

Condition: used, Semi-Automatic Foil sealing machine ROBOPAC ARIANE 5040 Halb-automatische Winkeleinschweißmaschine / Semi-Automatic Foil sealing machine ROBOPAC ARIANE 5040 Year 2005 - Serial-No. KN 070192 Mobile on mobile frame After sealing - automatic transport into tunnel Sealing frame max. 500 x 400mm Height adjustable working table Itodpjx Ux D Rsfx Adweb Shrinking tunnel with conveyor Film carriage on rails Dimensions of tunnel arc 544 x 387 x H 190mm Overall dimensions 1900 x 900 x Ht 1300mm Sehr guter Zustand - TOP Condition Online-Video-Inspection by WhatsApp - MS Zoom - Telegram On Stock Emskirchen/Nürnberg - Available Immediately - Can be test

Condition: used, Line boring machine WEBO with 4 stations type B 20 make no. 376/13; 376/14; 376/27; 376/36 year of construction approx. 1970 drilling capacity 20 mm spindle adaptor MK 2 - long spindle sleeve drilling head distance 335 mm throat 260 mm pinol stroke 190 mm table size 350 x 1500 mm distance drilling spindle/table min.30 mm / max. 700 mm Spindle speed drill head 376/13 355, 500, 710, 1000, 1400, 2000, 2800, 4000 rpm. Spindle speed drill head 376/14 355, 500, 710, 1000, 1400, 2000, 2800, 4000 rpm. Spindle speed drill head 376/27 250, 355, 500, 710, 1000, 1400, 2000, 2800 rpm. Spindle speed drill head 376/36 180, 250, 355, 500, 710, 1000, 1400, 2000 rpm. Motor power 1,1 / 1,3 kW Mains connection 380 Volt, 50 Hz - Spindle speed via 2 motor speeds and 4 V-belt steps - drill head height adjustment via toothed rack and hand crank approx. 300 mm Itodpfx Asihmwtodwob - height adjustable drilling table approx. 350 mm space requirement L x W x H 1750 x 1100 x 1900 mm weight 1900 kg good condition

Condition: used, Automatic film bundle machine or film wrapping machine Müller & Engels type BMS-620 for fully automatic bundling and strapping of wooden packages with film. The machine is used for safe packaging of long goods such as moldings, profiles, boards or panels for transport and storage. Ideal for use in sawmills, planing mills and other facilities with long products. incl. roll of film. Bundle width: about 400 mm Bundle height: about 300 mm band length: unlimited Ring Ø: 620 mm Packaging material: Slide Itsdpfx Adeyaa A Rsweb

Condition: new, saw blade diameter 550 mm Number of revolutions 3580 r.p.m hole of sawblade 32 mm Ijdpfx Adjuddluewetb Control NC total power requirement 3 kW weight of the machine ca. 250 kg required space 980 x 1130 x 1430 mm The Gerd Wolff AC 550 is an automatic aluminium cutting machine which is manufactured for our sales brand "GERD WOLLF Maschinenfabrik" by a renowned manufacturer from Türkiye. Schnittbereich 90° rund: 155 mm Schnittbereich 90° quadratisch: 155 x 155 mm Schnittbereich 90° rechteckig: 260 x 200 mm Schnittbereich 45° rund: 130 mm Schnittbereich 45° quadratisch: 130 x 130 mm Schnittbereich 45° rechteckig: 180 x 200 mm Standard Accessories - Location points for 15° – 22.5° – 30° – 45° – 67.5° - Fixing handle for locking at intermediate angles - Adjustable cutting speed for different types of profile - Saw covering with safety switch - Belt propulsion saw - Two hand safety operation - Easy to change saw blade - 2 x Pneumatic vertical piston with clamps - 1 x compressed air gun Optional Equipment - Hydrocheck – Hydraulic speed adjustment for aluminium profiles - Cooling system for aluminium cutting - Auxiliary conveyor with rulers

Condition: used, Single-Column Eccentric Press RASTER ZEULENRODA Type PDA 100 Year of manufacture: 1995 Pressing force: 100 tons Throat depth: approx. 360 mm Table size: 1200 x 710 mm Ram area: 900 x 500 mm Table opening: 400 x 120 mm Stroke adjustment: 6 to 82 mm Ram adjustment: 100 mm Installation height, max. stroke, ram Top Dead Center (TDC): max. 469 mm Installation height, max. stroke, ram Bottom Dead Center (BDC): max. 387 mm Strokes per minute: 50-200 s.p.m. Main drive motor power: 18.5 kW Power supply: 400 Volt, 50 Hz - Hydraulically actuated multiple-disc wet clutch and spring-loaded safety brake - Infinitely variable drive via PIV gearbox with inching mode for automatic stroke adjustment and setup operations - Hydraulic overload protection in the ram - Press force and process monitoring via UNIDOR APS - Pneumatic, steplessly adjustable ram weight compensation - Roller feeder MABU WE16, 160 x 3 mm, programmable feed length - Central grease lubrication - Operating manual and documentation for the press Included: Roller feed unit MABU Type WE16 Strip width: 160 mm Strip thickness: max. 3 mm Iedpfx Adox U Eiaswstb Strip cross-section: max. 300 mm² Roller diameter: 63 mm Strip speed: 40 m/min - Adjacent feeder control MABU Space requirements for eccentric press L x W x H: 270 x 240 x 350 cm Weight of the press: 13.5 tons

Year of construction: 2026, condition: new, functionality: fully functional, Corrugated box making machine is a machine designed for the production of cardboard boxes. Boxmaker is very easy to operate and adjust. It is characterized by very fast and precise work as well as the possibility of very easy adjustment of the machine. Technical details:  working width: 2400mm  large touch screen 15"  all settings for box production is controlled from touch screen  all set up is automatically simultaneously, 1 minute set up Itjdpfjwt S Dzex Adweb  capacity: ≈ 800 boxes per/hour  minimum board size (WxL): 200 x 400mm (minimum box 100x100x100mm)  maximum board size (WxL): 2400mm x unlimited  table feeding  segment slotting knives: 600mm (200 + 4x100mm)  slot width: 8mm  4 scoring wheels  3 circular knives for longitudinal cutting  cross cutting  multi cutting  gluing unit (cold glue by Robatech)  VPN connection  preprogrammed FEFCO styles (more than 40 fefco codes)  self design option  catching table  voltage: 3x380V  installed power: 10.85 kw

Condition: new, Year of construction: 2026, Simply top - and practically as if by itself The automatic pointing machine from VKM The innovative power of the automatic pointing machine makes it possible: this machine combines pointing, chamfering and cutting to length in a few efficient steps and within one cycle time. Behind this is a sophisticated system that allows all production steps to be carried out with maximum precision at maximum speed. Perfect for all logs that are already milled and/or peeled and waiting for their final shape as posts, poles or palisades. Simply point - and practically by itself The automatic pointing machine from VKM The innovative power of the automatic pointing machine makes it possible: this machine combines pointing, chamfering and cutting to length in a few efficient steps and within one cycle time. Both models allow three process steps - coping, pointing and chamfering - to be carried out fully automatically at the same time. Without slowing down the production flow: For example, the single-length machine can handle up to 4,000 wood piles and more in single-shift operation. The powerful geared motors run up to top performance via frequency converters - for maximum speed in cutting and cycle time optimization. Ijdjhm S Rujpfx Adwjtb This has a particularly positive effect when handling different diameters: the processing speed can be easily adapted to the logs.

Condition: used, make PEISLER JA . siehe bitte Fotos amount 2 im Paket documentation eine ist vorhanden +++++ Itodpfxjhy T Nrj Adwob Please note: The machine is dismantled and ready for loading. It is not possible to show it under power or make a video. Our offer includes already the best pictures. So we don’t have and won’t send additional pictures. +++++

Condition: excellent (used), functionality: fully functional, Year of construction: 2022, control type: CNC control, degree of automation: automatic, Fully automatic swivel bending machine with warehouse integration Manufacturer: TRUMPF Model: TruBend Center 7030 (B34) Year of manufacture: 2022 Control: TecZone Fold programming, touch operation, additional screen TECHNICAL DATA: Max. bending length: 3,123 mm Min. bending length: 200 mm Max. box height: 220 mm Max. component size: 3,120 x 1,500 mm Max. diagonal of component: 3,460 mm Max. material thickness: Steel: 3 mm, Stainless steel: 2.2 mm, Aluminium: 4 mm Min. material thickness: 0.4 mm Min. bending depth (standard tool): 145 mm Min. bending depth (retractable hold-down tool): 30 mm Connected load: 80 kVA Average power consumption: 15 kW Space requirement (L x W x H): 8,348 x 5,113 x 3,345 mm (min. hall height: 4,300 mm) EQUIPMENT: - Front gauge - Loading grippers - Rotating part manipulator - 2-axis part manipulator with vacuum modules - 5-axis backgauge Iodpfjx Tii Iox Adwetb - Optical angle assistant - Hold-down tools - ToolMaster - Control unit with foot switch - ACB Laser (Automatically Controlled Bending) - 3-surface vacuum module set - 2-surface magnet module set - Bending tools OBW90 and UBW90 - Retractable hold-down tool ENW - Additional bending tool function ZBW Comprehensive set of various tools included AUTOMATION: - Robot and warehouse interface (use without warehouse requires adaptation) - Loading and unloading unit with warehouse integration (without pallet), including for blank separation - Safety fence, swing doors, light barriers - Unloading table with conveyor system Further information available in the pictures. This used machine can be inspected under production conditions. All information is without guarantee – sale excludes any warranties or guarantees. Subject to prior sale.

Condition: good (used), Heidelberg Cylinder S 54×72 Automatic Die-Cutting Machine Itedpfsx N Dymjx Adweb This machine is in production and ready to go. Format: 540x720mm The machine is ready for die-cutting. Fully automatic, central lubrication. Includes mounting frame, cylinder plate, carriages, and a set of fillers and locks.

Condition: good (used), Horizon PF-40L Automatic Folding Machine Machine in perfect condition, current production model. Compact external dimensions, mounted on wheels for easy movement. Automatic machine setup from the control panel, high-stack feeding, extended feeding. Technical specifications: Maximum format: 320x630mm Min. format: 125x128mm Basic weight: 40-160gsm Speed: 23,000 pcs/h 2 parallel cassettes Ijdpfx Adjx N Dxiswjtb 230V power supply Electrically controlled delivery Counter with batching function Smooth speed and feed adjustment High-stack feeding Sound-insulating panels on all units and cassettes Documentation

Condition: repair required (used), Year of construction: 2005, functionality: not functional, Automatic stretch wrap machine for loads placed on pallets. Machine requires repair! Missing one stretch film carriage, ASI communication not functioning, and control cabinet incomplete. Original machine documentation and electrical schematics included. Manufacturer: M.J. MAILLIS GROUP (SIAT) Model: MANCON 1710 Itedpfx Adjxfbfvoweb Year of manufacture: 2005

Condition: excellent (used), Year of construction: 2013, operating hours: 20,000 h, functionality: fully functional, For sale: a well-maintained, semi-automatic 180-ton press with low usage, as shown in the pictures. Iedpfx Adex Tg Dijwjtb

Condition: new, Year of construction: 2026, functionality: fully functional, total length: 4,440 mm, total width: 1,487 mm, total height: 2,793 mm, input voltage: 400 V, overall weight: 1,900 kg, input current: 16 A, ELECTRONIC VERTICAL DRILLING MACHINE FOR GLASS MODEL: PRIAM BRAND NEW Priam model is a two-spindle (double-sided) vertical glass drilling machine. It is designed for customers looking for a functional and easy-to-use machine that is also durable. When designing it, we went back to the old school of machine construction – on heavy, heat-treated steel bodies with mechanical solutions for subsequent easier operation and servicing. With this different approach to design and manufacturing, our machine ensures many years of trouble-free glass drilling, providing a multiple return on investment. To make sure that the components of our drill are made with due care, we manufacture them in Poland using local contractors. The main body is made on site, by our company, and then heat treated and processed further in local areas. This ensures that all production is carried out under our careful supervision, and any imperfections can be detected and corrected before the product reaches the customer. This ultimately also supports the local machinery industry. The product’s components are at the highest European level. Our suppliers include SIEMENS, HITACHI, UNITRONICS,SCHNEIDER,GARLOCK Mechanical components are accessible, while in-service replacement is simple and quick. The Expoglass Priam drill - functionality at the highest level: ⦁ 2 spindles (front and back) – allowing to drill the pane in a single pass – without turning it ⦁ Electronically controlled loading bar – in order to set the size of the bottom edge of the glass from the hole, you just need to enter the required size on the touch screen and the machine will automatically adjust to the right position Ijdpfxod S Uhqj Adwstb ⦁ Quick drilling bit change mode – after pressing the drill bit change button, both spindles are automatically locked (they cannot be turned), the vertical table, located between both drilling bit, slides down – thus opening a large space between them. This means that the drill bits can be unscrewed without the use of a wrench, and there is plenty of space to perform this operation comfortably. ⦁ Automatic (electronic) measurement of the drill bits length and position – after the drill bits have been changed, the machine automatically calibrates them, measuring their length so that it knows the distance between the glass and the drilling end of each bit – very important in small plants where there are no series, but most of the holes are made individually ⦁ Automatic (electronic) calculation of spindle cavity depth – after automatic calibration of spindles, the machine measures the thickness of drilled glass by itself, by pressing the glass, and then selects the perfect values of cavities on its own. The operator's only task is to click the "drill" button, the process is completely automatic ⦁ Electronically controlled feed of the spindles – significantly increases machine capabilities, in addition to enabling the operation of most of the foregoing functionalities, it also makes the feed values perfectly adaptable to any situation and changeable with just a few clicks on the screen. This is illustrated, for example, by the fact that e.g. after drilling a 15 mm piece of glass, you take 10 seconds to change the settings, you can immediately drill a 2 mm glass pane without fear of cracking or chipping. And all this without the experience and "intuition" of the operator

Condition: used, Year of construction: 2009, operating hours: 6,000 h, functionality: fully functional, travel distance X-axis: 800 mm, travel distance Y-axis: 600 mm, travel distance Z-axis: 500 mm, controller model: Heidenhain iTNC530, spindle speed (max.): 36,000 rpm, GF Mirkon XSM600U X: 800 Y: 600 Z: 500 A: +30/-100 degrees C: 360 degrees continuous HSK50 spindle: max. 36,000 rpm, 25 kW HR410 handwheel 60-station tool changer Itjdpfx Adswa R A Nswob Rotary table including 3R clamping system Chip conveyor Coolant system with 20 bar internal coolant supply Blum laser tool measurement M&H 3D probe Pallet automation with 21 pallets - the pallets are not included in the scope of delivery This machine is offered on a customer order basis!

Condition: new, Year of construction: 2025, CORMAK BS530H Metal Band Saw – A Professional Tool for Cutting Pipes and Profiles The CORMAK BS530H metal band saw is an efficient semi-automatic bandsaw designed for precise cutting of steel elements, pipes, and profiles at various angles. Its solid cast-iron construction, reinforced blade guidance system, and advanced hydraulics make it ideal for serial production and demanding industrial environments. The integrated control panel allows a single operator to manage all functions, significantly reducing operation time and improving workplace ergonomics. Key Advantages of the Machine Semi-automatic operation – hydraulic arm lifting/lowering and vise control via control panel. Worm gearbox with bronze components ensures smooth, vibration-free, and precise operation. Stepless cutting speed adjustment from 20 to 70 m/min – suitable for various materials. Itjdpfx Asw U Svlsdwsb Carbide and ball-bearing blade guides for durability and precise blade tracking. Quick-release vise, manually or hydraulically controlled, adjustable left/right. Miter cutting range from -45° to +60° with precise angle scale reading. Heavy-duty cast-iron frame ensures cutting stability and long machine life. Hydraulic feed rate control with adjustable return height of the saw arm. Construction and Technology The BS530H model features a reinforced drive system and industrial-grade hydraulics, ensuring reliable performance under intensive use. The massive frame construction minimizes vibration and ensures consistent cutting performance. An ergonomic control panel allows full process control from one location. The coolant system, integrated into the base, efficiently removes heat and debris, protecting the blade from overheating. Cutting Precision and Efficiency With stepless speed control, manual or semi-automatic operation modes, and a dial gauge blade tension meter, the BS530H delivers repeatable, high-quality cuts, even in long production runs. A material support roller and arm lock after the cutting cycle enhance operational safety and efficiency. Applications The CORMAK BS530H is dedicated to industrial production facilities, metalworking shops, and companies performing serial cutting of profiles, pipes, and solid steel sections. It’s ideal for serial manufacturing, prefabrication, and component preparation for welding or further processing. Standard Equipment Control console with semi-automatic functions Hydraulic vise Blade cleaning brush Coolant system with pump Front material roller Dial gauge blade tension meter CE certificate and technical documentation (DTR) Technical Specifications: Parameter Value Working height 965 mm Cutting speed 20 – 70 m/min Blade dimensions 3770 × 34 × 1.1 mm Coolant system power 0.1 kW Total power 3.0 kW Power supply voltage 400 V Dimensions (W × D × H) 2200 × 1400 × 2050 mm Weight 730 kg

Condition: new, Year of construction: 2025, Powerful, reliable and modern semi-automatic band saw for metal with automatic arm raising and lowering. The arm is rotational in both ways. The machine is fantastic for ironworking, e.g. cutting tubes and profiles. Product features CORMAK S-200RH band saw is by default equipped with automatic arm lowering and raising as well as with a precise arm height regulator. Due to an automatic hydraulic damper, the manual handling of the machine has been simplified to feed and clamping the cut material in a vice. The arm made of uniform iron casting, together with a refined, solid and stable construction, ensure S-200R's exceptional rigidity, resulting in failure-free handling and high cutting precision. The innovativeness and production of semi-automatic and automatic series "CORMAK-PREMIUM LINE" band saws, compliant with the norms and standards consistent with ISO:910001 and ISO:140001 certificates, warrant safety, quality and reliability of the product. M3V motors from ABB, a renowned worldwide manufacturer, warrant long-term reliability. As an official and the only representative on the Polish market, we assure that the product is original and provide professional, customised warranty and post-warranty services. Technical data Type - semi-automatic Arm raising and lowering - hydraulic with smooth arm lowering control Band speed - 36/70 mm/min Angled cutting - left to 45°, right to 60° Vice - hydraulic Minimum cutting diameter - Ø 5 mm Minimum material length in vice - 30 mm Ijdpfxji D D A So Adwjtb Vice base height - 780 mm Cutting band dimensions - 27×0.9×2910 mm Total power - 2.1 kW Dimensions (LxWxH) - 1600×800×1400 mm Weight - 530 kg Angle 0º -----ø250 320×240 240×240 45º L ø200 220×120 190×190 45º P ø220 235×120 210×210 60º P ø110 155×110 100×100 Default equipment Control panel on separate component Built-in hydraulic unit Hydraulic control of arm motion (up – down) with possibility of smooth lowering speed control Arm position memory function (arm returns to a defined height after cutting) Cutting at angles of L/R 45° - 0° - 45° - 60° Brush for cleaning band Cooling system Bi-metal band saw EC Declaration of Conformity User manual The price is a net price. Price does not include shipping costs. For more information, please contact us by phone or e-mail. We invite you to familiarize yourself with the offer on our website.

Condition: good (used), Year of construction: 1998, 4196 GM 25: Bar feeder year 2001 / GM 25 year 1991 3330 AS 25: Bar feeder year 2001 / GM 25 year 1969, completely overhauled in 1992 4423 GM 26: Itedpfx Adsx S E Svswjb Bar feeder year 1998 / GM 26 year 1998 4283 GM 26: Bar feeder year 2000 / GM 26 year 1995

Year of construction: 2011, condition: used, Technical details: saw blade diameter: Ø 400 - 500 mm hole of sawblade: Ø 50 mm saw blade rpm: 6 - 70 / steples U/min cutting range 90 degrees: round: Ø 140 mm cutting range 90 degrees: square: 140 x 140 mm cutting range 90 degrees: flat: 400 x 30 / 345 x 70 / 300 x 95 mm Table dimensions: LxB: 620 x 670 mm height over floor: 1000 mm total power requirement: 8 kW Itedpfx Adju Niuhowsb weight of the machine approx.: 1170 kg The machine is currently in the technical department. SEMI-AUTOMATIC CIRCULAR SAW - PROFILE CIRCULAR SAWING MACHINE Profile circular saw with two-hand control for sawing materials: steel as solid material, pipes and profiles, taking into account the cutting area. Cutting speed depends on the material to be sawn Clamping pressure 30 bar Clamping stroke Øxstroke: 100 x 160mm Hydraulic pump Operation via control panel / two-hand operation Coolant system with pump *

Year of construction: 2025, operating hours: 1 h, condition: new, functionality: fully functional, MONTHLY OFFER – only in April! The ZS 6000 automatic packaging machine is suitable for various vegetables such as potatoes, onions, carrots, cucumbers, beets, etc. It is used for automatic, electronic weighing, filling Raschel mesh bags, and sewing or sealing the bags. The harvested produce is metered from the bunker via a ribbed conveyor belt into the two electronic scales. The conveyor belt transports the harvested produce to the desired delivery point. Packaging units range from 1 to 25 kg. Available in two versions: powder-coated or stainless steel Technical specifications: Capacity: approx. 6 t/h Type / hour 5 kg – 1,690 kg 10 kg – 2,600 kg 15 kg – 3,700 kg 20 kg – 6,120 kg Power rating: 6 kW, 400 V Packaging range: 1–25 kg (manual up to 50 kg) Packaging type: Raschel net Sewing machine: New Long NP-07 single-needle sewing machine Control system: 7" touchscreen Label dispenser Conveyor belt with vibration motor Dosing system with vibration system Isdpfx Aewax U Hsdwstb Suitable for crops: Potatoes, onions, cucumbers, carrots Dimensions: Length: 1,940 mm Width: 4,300 mm Height: 2,230 mm Weight: approx. 950 kg

Condition: ready for operation (used), Year of construction: 1986, Immediately available from location: Fully automatic milling machine Busch Type NF 8/32 Year of manufacture: 1986 Groove width up to 32 mm Machining length up to 6100 mm Isdpfsyayckox Adwstb Automatic material feed Automatic infeed Drive 5.5 kW Accessories: support tables Tool holders, milling cutters Coolant system Digital readout Weight: 4 t Price: EUR 3,750.— plus VAT, ex location.