Used Auxiliary Fence for sale (5,191)

Condition: excellent (used), Year of construction: 2007, Pressing force: 2,000 kN Table size: 2,300 x 1,100 mm (W x D) Pass-through opening: 2 pcs. 700 x 300 mm Distance between uprights: 2,460 mm Ram clamping area: 2,300 x 1,100 mm Lateral clearance: 740 mm Die height: 550 mm (ram down, adjustment up) Stroke rate: 30 - 140 strokes/min, steplessly adjustable Stroke: 20...220 mm Ram adjustment: 150 mm (motorized) Main drive: 30 kW Weight: approx. 27,500 kg Features: • Siemens + Beckhoff control • 8-fold slide guide • Motorized oil circulation lubrication • Automatic ram adjustment • Hydraulic overload protection • Pneumatic ram counterbalance • Electromechanical stroke adjustment • Siemens + Beckhoff control system • Beckhoff panel visualization • T-slots in table and ram (28 mm, spacing 300 mm) • Vibration-damping machine feet • 4 pcs. tool safeties + 4 pcs. cam outputs • Ram with 20 mm wide central slot • Hydraulic tool clamping on table and ram • Hydraulic roll blocks for tool change Coil line by Kemmerich, consisting of: Decoiler Type: V 5000 A – SH – 600 - S Load capacity: 5,000 kg Coil width: 100 - 600 mm Expansion range: 470 – 520 mm Coil outside diameter: 2,000 mm • Motorized auxiliary drive • Pneumatic disc brake • Hydraulic expansion by wedge segments • Rear support disc and 3 attachable limiting arms at front • Hydraulically actuated and driven hold-down roller, laterally adjustable by handwheel • Load carriage (stationary, decoiler moves hydraulically), lifting height 770 mm with 4 limiting bars Straightening machine Type: RMBMZ 50.600 UF Coil width: 40 - 600 mm Coil thickness: 0.5 – 4.0 mm Max. cross-section: 1,200 mm² Number of rollers: 9 pcs. Roller diameter: 50 mm Number of feed rollers: 2 pcs. Feed roller diameter: 100 mm Speed: 3 - 25 m/min Features: • Rollers hardened, ground and hard chromed • Drive of lower straightening rollers and feed rollers via gear transmission • Motorized roller frame adjustment, precision 1/100 mm, settings storable • Upper rollers ventable by 100 mm • Feed roller pneumatically ventable • Lateral strip guidance at entry with handwheel and leadscrew • Outlet roller basket and loop bridge • Loop control via ultrasonic sensor • Hydraulic introduction aid, consisting of table with extendable tongue and upper bending roller Roll feed Coil width: max. 600 mm Features: • Rollers hardened, ground, and chromed • Driven by gear motor • Upper roller hydraulically ventable • Height adjustment hydraulic • Lateral strip guidance at entry with handwheel • Roller basket Additional features: • Pneumatically swiveling loop bridge between straightener and feeder • Safety fence around the entire line • Decoiler and straightener on common base frame • Various spare rollers for straightener Hnsdpsv T Anlofx Am Del The complete line can still be inspected under power at the current owner's site!

Condition: new, With a 520 mm planing width, motorized thickness table adjustment, and comfort switching - Stable steel and cast iron construction - Large, ribbed jointer tables made of cast iron - Smooth operation due to high dead weight - Four feed speeds - Motorized thickness table lift with two speeds and digital display - Segmented pressure beam at the infeed - Precision ball bearings on the four-knife cutterblock - Helical, hardened steel infeed roller for especially consistent and gentle wood feed - Outfeed roller with rubber coating - Large tiltable fence, adjustable from 90° to +45° - Standard auxiliary fence included - Powerful industrial motor - Pneumatic quick-change system with pneumatic raising and lowering of the jointer table - The extraction port remains in the same position for both jointing and thicknessing operations—no need for additional extraction hoses, inconvenient switching, or rerouting around the machine Scope of delivery: Technical Data: Hnodpfxsxnqyhs Am Dsl Dimensions and Weights: - Length (product): approx. 2300 mm - Width/Depth (product): approx. 1100 mm - Weight (net): approx. 980 kg Jointer: - Total table length: 2300 mm - Infeed table length: 1200 mm - Working height: 930 mm - Max. planing depth: 6 mm - Fence length: 1200 mm - Fence height: 190 mm - Fence tilt: 90 – 45° Extraction connection: - Extraction port diameter, thicknesser: 120 mm Installation Information: - Space requirement, length: 2300 mm - Space requirement, width/depth: 1610 mm Explanation: Max. travel paths or usable lengths are taken into account. - Machine body length: 1235 mm - Machine body width/depth: 850 mm - Working area length: 1000 mm - Working area width/depth: 3500 mm Note: Please add the working area to the space requirement to determine the recommended free installation space for the machine. Thicknesser: - Min. working height: 3.5 mm - Max. working height: 250 mm - Max. cutting depth: 8 mm Electrical Data: - Main drive motor power: 7 kW - Connection voltage: 400 V - Frequency: 50 Hz Cutterblock: - Cutterblock type: TERSA - Cutterblock diameter: 120 mm - Number of knives: 4 - Cutterblock speed: 5000 rpm - Max. planing width: 520 mm Feed: - Feed speed: 5/8/12/18 m/min

Condition: new, - New -Description:TERSA quick-change system for changing planer knives in secondsFour-blade shaft for best planing resultsSmooth running thanks to precision unit and heavy cast iron designLong planing tables for precise planingRobust dressing tables made of ribbed gray cast iron, milled and stress-free, making them insensitive and permanently flatLarge, sturdy aluminum dressing fence with round rod guide (1200 x 150 mm), easily adjustable and tiltable up to 45°With auxiliary fence as standardPowerful 5.0 kW industrial motorSturdy cast steel constructionSlot drilling device can be retrofittedLength (product) approx. 2250 mmWidth/depth (product) approx. 1370mmWeight (net) approx. 465kgJointerTotal length of the tables 2250mmMax. chip removal 8mmDressing fence length 1200mmDressing fence height 160mmSuction connectionSuction nozzle diameter 120mmInstallation informationSpace requirement length 2250mmSpace requirement width/depth 1440mmExplanation of space requirementWorking area length 1000mmWorking area width/depth 3500mmChip removal max. thickness 8mmElectrical dataPower drive motor 5kWSupply voltage 400VMains frequency 50HzItem no. 5503521 Hedpsvwf Hrofx Am Donl

Condition: new, - new -manufactured by Holzkrafttype FS 41 elite S Tersa DigitalDigitale version with motorischer Dickentischverstellung- Hobelmessersystem ermögclear opening sekundenschnellescutter change soas particularly geräuscharmer Lon- Besonders lange Abrichttische (2200 mm)aus einem piece ermöglichen leichtes  Abrichten derWerkstücke- Arbeitstische sind aus Grauguss, nachgeglüht andspannungsfrei, dadurch unempfindlich and dauerhaft planar- Gleichzeitiges opening der tables- to rear, gleichzeitig öffnende Abrichttische for kurzeRüstzeiten- Leistungsstarker Industrie-motor- Festmontierte dust extraction hood- robuste steel-/Graugußkonstruktion- Gleichzeitiges opening der tables- großer surface fence (serial-production with auxiliary fence)- Materialvorschub with two speeds aboutspearatem motorTechnische Daten:total length der tables:  2200 mmworking width:   410 mmmax. chip removal: 5 mmthickness:dimensions Dickentisches: 775x410 mmmin/max. working height:  3/240 mmfeed speeds: 6/12 m/elwellen D./Hobelmesser: 95 mm/4 piecerpm:   5000 1/minmotor 400 V/50 Hz/S6 - 40 % 5,0 kW (6,6 PS)suction nozzle diameter: 1 x 120 mmweight:    450 kgArt-No.: 550 3441located in: 97447 Gerolzhofen- free on truck- Hnodpevwgc Uefx Am Dsl

Condition: new, exhibition machine Technical specifications: Working width of machine table [mm] 520 Total length of machine table [mm] 2750 Front table length [mm] 1550 Rear table length [mm] 1200 Shaft diameter [mm] 120 Planer shaft speed [rpm] 5000 4 knives [mm] 35x3x520 Aluminum planing fence [mm] 1200x190 Swivel range of the planing fence from 90° to -45° Table height from floor [mm] 845 Diameter suction hood [mm] 120 Maximum chip thickness [mm] 8 Controls/Functions - Manual adjustment of the front table - Display of chip thickness on scale Security/Protection - Planer shaft protection with parallelogram adjustment below the  Working line (CE version) - "Boomerang" cutterblock protection (versions with electric  protective devices) - Insertion work not possible (CE version) - Lockable main switch - Thermal protection switch - 110V auxiliary circuit - Automatic engine brake (CE version) - Emergency stop button - CE declaration of conformity (CE version)   fixtures - Complete planer shaft and knife holder with markings as a positioning aid  with setting gauge for planer knives - Service key set - Motor with direct connection :  (S1): 4kW 5.5hp 50Hz (4.8kW 6.6hp 60Hz)  (S6 -40%): 5kW 7hp 50Hz (6kW 8hp 60Hz) 109999 Execution according to safety regulations No. 1 Hodpfxsvwf Ame Am Denl R11163 nova f 520 version CE 930731 volts 400 EU 931201 Frequency 50 Hz 555014 P1 version - CE and electrical protections Motor power 7kW 50 Hz with automatic star-delta switch   570127 Additional folding stop for processing thin parts 570135 TERSA cutterblock with insert knives Complete with a set of knives 083250 base 109993 MACHINE LANGUAGE: German

Condition: new, Basic equipment and accessories10-year guarantee on the guide system of the saw carriage- Saw carriage with anodized aluminum profile guide made of hardened,ground and flanged steel guides- Saw carriage length 3200mm- "READY" electronic control, 2-axis control (3rd axis onrequest) with:- Height adjustment and inclination of the saw unit (control of therip fence on request)- Management of the tool data with automatic correction of theCutting height in relation to the angle of inclination of the saw blade- Manual, semi-automatic and automatic mode with 99storable work programs- Additional functions: calculator and hour meter- Trimming frame for quick positioning of the stopmiter cuts- Table extensions in the outlet- Cutting length at the rip fence 1270 mm- 2-axis control with 99 programsMotor 7kW 50Hz (8kW 60Hz)- Motor with direct connection with push buttons- Three main saw blade speeds- Scoring unit with independent motorization, externally adjustable andStops for easy saw blade positioningSecurity/Protection- Emergency stop button on the front- Emergency stop button on the side near the rip fence (Version CE)- Thermal protection switch- Saw blade swing protection (version CE) integrated suction, suction nozzlewith a diameter of 80 mm- Saw blade swing protection with integrated suction, suction nozzle with 80 mmdiameter- Automatic motor brake on the main saw blade (CE version)- Lockable main switch- 110 V auxiliary circuit- CE Declaration of Conformity (CE version)Technical specificationsMax cutting height at 90° (mm) 140 with blade 400Max cutting height at 45° (mm) 97 with blade 400Saw blade tilt (degrees) 45Programmed lifting and swiveling of the saw blade unitSaw blade speed (rpm) 3000- 4000- 5000Scorer speed (rpm) 8500Main engine power (S6 -40%) kW (hp) 50 Hz 7 (9.5)Scoring unit power (S6 -40%) kW (HP) 50 Hz 1.3 (1.7)Format cuts:- with trolley 1600 (mm) n.a.- with trolley 3200 (mm) 3200x3200Cutting width for parallel cuts (mm) 1270Suction nozzle diameter:- on frame (mm) 120- on the saw blade guard (mm) 80- on the riving knife (mm) n.a.Net weight base machine (kg) 1050109999 Execution according to safety regulationsR10078 nova si 400ep CE version930731 volts 400 EU931201 Frequency 50 Hz570343 Digital readout for rip fenceComplete with:- Digital display and magnetic tape570133 Motor 9kW 50Hz (11kW 60Hz) with automatic star/delta switch kW9 HP12 Hz50 (kW11 HP15 Hz60)083202 base109993 MACHINE LANGUAGE: German Hjdpjvxr Sksfx Am Donl

Condition: ready for operation (used), Year of construction: 2022, machine/vehicle number: AB00022255, functionality: fully functional, blade shaft diameter: 120 mm, feed roller diameter: 67 mm, table length: 520 mm, table width: 900 mm, working height: 250 mm, TECHNICAL DETAILS Hodpfjydc Ecjx Am Djnl Table dimensions: 520 x 900 mm Working height: max. 250 mm Working height: min. 3 mm Tersa cutterhead: 520 mm with 4 knives Cutterhead diameter: 120 mm Feed roller diameter: 67 mm Feed speed: 5 / 8 / 12 / 18 m/min MACHINE DETAILS Main motor power: 9 kW Weight: 1,058 kg EQUIPMENT Pneumatic table adjustment Electronic thickness table height adjustment via positioning control Tilting fence including auxiliary fence for strips

Year of construction: 2021, condition: new, Technical data: usable working width 520 mm Hedpfxjn Sm Tie Am Dsnl total table length 2310 mm cutter block diameter 120 mm cutterblock speed 5000 rpm 4 knives 35x3x520 mm aluminum dressing fence 1200x190 mm planing fence inclination from 90° to 45 min./max. planing height 3 / 250 mm feed speed thickness 5-8-12-18 m/min. Suction stroke diameter dressing 120 mm Suction hood diameter thickness 120 mm Standard equipment: - Work table adjustment in the infeed by means of parallelogram system, indication for chip removal by degree scale. - simultaneous height adjustment and locking of work tables complete with anti-tilt device - quick changeover system to switch from dressing to thicknessing operations (CE version) by means of a special support for opening the dressing tables and an automatic pneumatic positioning system of the suction hood, with hydraulic support - "READY" electronic control includes: - Adjustment of the thicknessing table - Manual, semi-automatic and automatic mode with 99 storable working programs - Additional functions: Calculator and hour meter - machine table with height adjustment by 4 steel threaded spindles - rubber-coated feed roller at the outlet - exchangeable feed rollers - link pressure shoes in the infeed - planing shaft and setting gauge for planing knives incl. the following special accessories: "TERSA" cutterblock with one-way reversible knives, swivelling auxiliary fence

Condition: new, Year of construction: 2025, machine/vehicle number: KK00050613, input frequency: 50 Hz, type of input current: three-phase, total length of planing tables: 2,250 mm, overall weight: 695 kg, chip removal: 5 mm, chip removal for surfacing (max.): 5 mm, number of planer blades: 4, planer shaft diameter: 120 mm, planing height: 240 mm, Equipment: motor brake, Holzkraft surfacer and thickness planer minimax fs 52 TERSA, Planing width 520 mm, planing height 3 - 240 mm, Hnjdpfxsxn Suae Am Dsl Surfacing table length 2,250 mm, 4-knife TERSA cutterblock, Motor 7 kW (9.5 HP); S6 5 meter connection cable 2.5 mm² with 16 Ah plug, complete with: simultaneously foldable tables, combined extraction hood for surfacer and thicknesser D = 120 mm, Thickness table adjustment via handwheel with integrated readout, star-delta switch, auxiliary fence, CE and BG - wood dust certified. Order no.: 5503501 Available immediately ex location Seevetal, without transport, subject to prior sale.

Condition: new, Year of construction: 2024, Technical data - Plane width: 510 mm - Feed table length 1620 mm - Output table length 1170 mm - Total table length 2850 mm - Engine power 5,5 kW /7,5 PS - knife shaft speed 5000 rpm - Suction connection 160 mm - Voltage 400 V / 50 Hz - Space requirement 2850 x 1420 mm - Colour light grey / purple blue - Weight: approx. 1050 kg Description - Solid German mechanical engineering - for dressing and jointing including hollow and pointed joint adjustment for planer width up to 510 mm and max. chip removal up to 8 mm - ergonomic working position directly on the cutter head - Solid steel spiral knife shaft - Cleaning set for spiral knife shaft - finely planed cast iron tables, total table length 2850 mm - Control panel on top at eye level with digital display of chip removal, the current delivery table situation (neutral, hollow and pointed joint), including - Document holder and practical tool tray - electromotive adjustment of the feed table via push buttons - Hollow and pointed joint adjustment at the delivery table Hnjdsfg Uzbepfx Am Dol - serrated table lips for noise reduction - Dressing fence Adjustment of depth and inclination via 1 lever operation, inclination adjustable up to 45°, mounted in extremely smooth-running steel guide - Anodized dressing fence ruler - Pivoting auxiliary stop Type 1545 - Console for feeding apparatus - Bridge protection TXF type 1570 with hinged cover - automatic engine brake - automatic star-delta start, motor protection switch - planed in the factory

Condition: ready for operation (used), Year of construction: 2018, functionality: fully functional, power: 7.5 kW (10.20 HP), saw blade diameter: 450 mm, tilt adjustment saw blade: 46 °, rotational speed (max.): 5,000 rpm, cutting width at rip fence: 1,300 mm, TECHNICAL DETAILS Saw blade diameter max.: 450 mm Cutting width at CNC parallel fence: 1,300 mm Max. speed: 5,000 rpm Infinitely variable adjustment Double roller carriage length: 3,000 mm Hnodpfxoy H Errs Am Dsl Mitre angle stop length: 3,200 mm Digitally adjustable Table extension: 840 mm Pneumatic quick-clamp range: 0-90 mm 2 quick clamps MACHINE DETAILS Power: 7.5 kW EQUIPMENT CE marking Saw blade guard Double roller carriage with TIP-SERVO-DRIVE Air cushion table Spray device with remote control Front support roller 2 pneumatic quick clamps Digital mitre gauge L CNC parallel fence

Condition: ready for operation (used), Year of construction: 2004, functionality: fully functional, machine/vehicle number: 9076, cutting height (max.): 160 mm, cutting width (max.): 450 mm, power: 15 kW (20.39 HP), TECHNICAL DETAILS Max. cutting width: 450 mm Max. cutting height: 160 mm Infeed table length: 8,200 mm Outfeed table length: 8,900 mm Max. infeed length: 8,000 mm MACHINE DETAILS Main motor power: 15 kW Power: 15.0 kW Control: Windows 10 Fuse: 63 A Dimensions & Weight Dimensions (L x W x H): 23,000 x 5,200 x 2,700 mm Weight: 8,000 kg EQUIPMENT Safety light curtain Safety fence Waste conveyor belt Label printer Hnodjy Nx Eqjpfx Am Djl Marking pen

Condition: ready for operation (used), Year of construction: 1993, functionality: fully functional, machine/vehicle number: F 36905, travel distance X-axis: 7,000 mm, travel distance Y-axis: 1,200 mm, travel distance Z-axis: 1,300 mm, spindle speed (max.): 2,000 rpm, controller model: HEIDENHAIN TNC 360, The protocol of the geometric acceptance is attached! TECHNICAL DETAILS X-axis travel: 7,000 mm Y-axis travel: 1,200 mm Z-axis travel: 1,300 mm Rapid traverse x/y/z: 10 m/min Table size: 8,000 x 1,300 mm Table load capacity: max. 4 t/sq.m Universal head: 5x90 plus manual 1 Tool holder: SK 50 Milling spindle speed range: 20 - 2,000 rpm Drive power: 30 kW Spindle torque: 2-speed gearbox, 750 Nm MACHINE DETAILS Control system: HEIDENHAIN TNC 360 Total power requirement: 50 kW Hnsdpfxsy Rrbhe Am Del Dimensions & Weight Installation space approx.: 9.0 x 3.8 x 4.6 m Machine weight approx.: 25 t EQUIPMENT Orthogonal milling head, water-cooled 3D wireless probe M&H 20.41 Partition wall for parallel operation/setup Internal air blast Internal coolant supply 15 bar Adapter for high-speed milling spindles with torque support Travelling operator platform Chip conveyor Electronic handwheel HR 410 Monitored safety fences Various optional accessories (angular milling heads, clamps, etc.)

Condition: new, Year of construction: 2025, operating hours: 60 h, functionality: fully functional, workpiece weight (max.): 40,000 kg, wheel width: 3,700 mm, feed length X-axis: 2,000 mm, feed length Y-axis: 1,300 mm, feed length Z-axis: 500 mm, rotary table diameter: 3,700 mm, position of the milling head: 0,025, table diameter: 2,000 mm, feed rate X-axis: 10 m/min, feed rate Y-axis: 10 m/min, feed rate Z-axis: 6 m/min, total length: 12,000 mm, gear diameter: 400 mm, total height: 5,000 mm, total width: 4,000 mm, Equipment: CE marking, documentation/manual, rotational speed infinitely variable, TECHNICAL REQUIREMENTS GERARING HOBBING MACHINE GHM 2500 CNC Description of the main components of the GHM 2500 machine The GHM 2500 CNC gearing milling machine is a machine tool intended for processing by milling toothed wheels and toothed crowns. The machine is equipped with an external teeth milling head - which can process the teeth with an inclination angle from 0 to +/- 45 degrees - and an internal teeth milling head. The machine is composed of a milling unit, a unit for clamping and rotating the workpiece and the pinion axis centering tip. The milling/gearing unit is provided with three translation axes and two rotation axes, as follows: -X axis: longitudinal/radial movement towards the workpiece axis -Y axis: vertical movement of the gearing head -Aza Z: tangential movement of the gearing head -Axis: inclination +/-45 degrees of the gearing head -Axis C: rotation of the main axis of the gearing head The part fixing unit (the machine plate) has a rotation axis, axis B, for rotating the part. 1. External Gearing head – the housing of the tooth milling head is a GG300 gray cast iron cast piece. On the front side there are the counter guides of the Y axis (vertical movement of the head). Inside are the main tool actuation mechanisms, the mechanism for the horizontal movement of the gearing head axis and the mechanism for tilting the gearing head. The main actuation mechanism of the gearing shaft is composed of a 55 kW – S1 motor, a ZF angular reducer and a gearing shaft, mounted in the housing of the toothing horse. 2. Internal Gearing head – the housing of the tooth milling head is a GG300 gray cast iron cast piece. On the front side there are the counter guides of the Y axis (vertical movement of the head). Inside are the main tool actuation mechanisms, the mechanism for the horizontal movement of the gearing head axis and the mechanism for tilting the gearing head. The main actuation mechanism of the gearing shaft is composed of a 55 kW – S1 motor, a ZF angular reducer and a gearing shaft, mounted in the housing of the toothing horse. 3. The Quill - has the role of fixing the high parts, having a vertical displacement stroke. 4. The longitudinal advance mechanism of the upright, X axis – is made by a servo motor 30 Nm_ 3000 rpm, a Gressner worm reducer and a ball screw diam. 80 x 10, accuracy class IT 3. 5. The vertical advance mechanism of the toothing head, Y axis – consisting of a 30 Nm_ 3000 rpm servo motor, a Gressner worm reducer and a ball screw diam 80 x 10, precision class IT3. 6. Plate advance mechanism / plate rotation, C axis – is made with two 50 Nm_ 2000 rpm servo motor, a Gressner worm reducer and a duplex worm that meshes with the worm crown located on the plate. 7. The gearing head tilting mechanism, axis B – is made by a / 20 Nm_3000 rpm servo motor, a Gressner worm reducer and a worm gear-segment worm gear transmission. 8. The axial displacement mechanism of the gear head, Z axis – is made by a 20 Nm_3000 rpm servomotor, an Alpha Getriebe planetary reducer and a ball screw diam. 63 x 10, accuracy class IT3. Hnodpfx Amjy A Nglj Djl 9. Top horizontal positioning mechanism, auxiliary axis X1 – a 20 Nm_ 2000 rpm servo motor, an Alpha Getriebe planetary reducer and a ball screw diam 63 x 10, precision class IT5 are used.

Condition: excellent (used), Year of construction: 2010, operating hours: 18,502 h, functionality: fully functional, machine/vehicle number: 3201379, type of input current: AC, sheet thickness (max.): 2 mm, sheet thickness steel (max.): 2 mm, sheet thickness aluminum (max.): 3 mm, overall weight: 40,000 kg, total length: 2,550 mm, total height: 1,090 mm, total width: 1,500 mm, Our Salvagnini P4X-2516 Panel Bender is a fully automatic, high-performance panel bending system designed to streamline sheet metal production with maximum efficiency and precision. It integrates automated loading, feeding, bending, and unloading into a single continuous process, minimizing manual handling and ensuring consistent output quality. The machine features adaptive bending technology with real-time sheet thickness measurement, allowing automatic adjustment of bending parameters for optimal accuracy. Equipped with an advanced SiX control system and intelligent software, it enables flexible production scheduling and program management. The inclusion of an automatic blankholder (ABA) and auxiliary bending tools (CLA) allows complex and multi-stage bending operations without manual setup, while the rotating manipulator enables multi-side bending in a single cycle. Max. sheet length: 3,048 mm Max. sheet width: 1,524 mm Max. bending length: 2,500 mm Sheet thickness (steel ~410 MPa): 2.5 mm (90°) Sheet thickness (stainless steel ~580 MPa): 2.1 mm (90°) Sheet thickness (aluminium ~265 MPa): 3.2 mm (90°) Max. bending angle: +135° / -135° Max. flange height: 165 mm Max. diagonal (rotatable sheet): 2,800 mm Min. sheet thickness: 0.5 mm Max. pack height (incl. pallet): 350 mm Max. load capacity: 5,000 kg Vertical stroke (loading table): 550 mm Rotation capability: 0°, 90°, 180°, 270° Automatic loading system with scissor lift table () Conveyor–destacker (PCD3015) for automatic feeding Automatic panel bending center P4X-2516 Upper bending blade (LS1) Lower bending blade (LI) Hodpfx Asyr Ackom Denl SiX CNC control system SOLE.P4 production management software OFFICE.P4 offline programming software ABA automatic blankholder (automatic length adjustment) CLA-A asymmetric auxiliary bending system UC1000-G13 gooseneck tool set Eroded clamp (for coated / special materials) PSE automatic cleaning & lubrication system SAP panel unloader / accumulator Spare parts kit (approx. €7,000 value)

Condition: used, functionality: fully functional, mileage: 4,35,438 km, power: 346 kW (470.43 HP), first registration: 09/2022, fuel type: diesel, overall weight: 8,088 kg, axle configuration: 4x2, wheelbase: 390 mm, color: white, gearing type: automatic, emission class: euro6, Year of construction: 2022, number of cylinders: 6, cubic capacity: 12,419 cm³, steering wheel position: left, Equipment: full service history, power assisted steering, Features Large cab capacity with high roof GX Battery, 12 V, 230 Ah, 2 units, maintenance free Diesel engine MAN D2676 LFAI, 346 kW (470 hp) output, 2,400 Nm torque, Euro 6e MAN TipMatic 14.27 DD Advanced Emergency Brake Assist (EBA) Driver comfort Air-conditioning system, Climatronic Comfort driver’s seat, air-sprung, with lumbar support and shoulder adjustment Comfort co-driver’s seat, air-sprung Bunk, top, with slatted support Bunk, bottom, with slatted support Auxiliary water heater 4 kW (night heater) Fridge and drawer, 1 unit, centre area, to rear Technical specifications Continental VDO 4.1 smart tachograph version 2 - legal demand from 21/08/2023 Tyres for front axle, Goodyear 315/70R22.5 KMAX S G2 Steering-Short haul TL Tyres for rear axle, Goodyear 315/70R22.5 KMAX D G2 Drive-Short haul TL Spare wheel, in accordance with configuration for front axle tyres Main wheelbase, 3,900 mm Axle ratio, i = 2.31 Fuel tank capacity 580 l, left Fuel tank capacity 580 l, right AdBlue tank capacity 80 l, left Road speed limiter, adjustable, limiter (engine speed regulation) Technology MMT infotainment system, Advanced Basic MAN TeleMatics Exterior Front headlights, LED Daytime driving lights, LED Fog lights, LED Contour lights, bulb, 2 units Hnsdpfey Sh Igox Am Dsl Roof spoiler, 600 mm adjustment range Side flaps, left folding and right fixed

Condition: used, functionality: fully functional, mileage: 4,66,071 km, power: 346 kW (470.43 HP), first registration: 08/2022, fuel type: diesel, overall weight: 8,088 kg, axle configuration: 4x2, wheelbase: 390 mm, color: white, gearing type: automatic, emission class: euro6, Year of construction: 2022, number of cylinders: 6, cubic capacity: 12,419 cm³, steering wheel position: left, Equipment: full service history, power assisted steering, Features Large cab capacity with high roof GX Battery, 12 V, 230 Ah, 2 units, maintenance free Diesel engine MAN D2676 LFAI, 346 kW (470 hp) output, 2,400 Nm torque, Euro 6e MAN TipMatic 14.27 DD Advanced Emergency Brake Assist (EBA) Driver comfort Air-conditioning system, Climatronic Comfort driver's seat, air-sprung, with lumbar support and shoulder adjustment Co-driver's seat, not sprung, length and backrest adjustment Bunk, top, with slatted support Bunk, bottom, with slatted support Auxiliary water heater 4 kW (night heater) Fridge and drawer, 1 unit, centre area, to rear Technical specifications Continental VDO 4.1 smart tachograph version 2 - legal demand from 21/08/2023 Tyres for front axle, Goodyear 315/70R22.5 KMAX S G2 Steering-Short haul TL Hnjdpfsy Sfnkjx Am Dol Tyres for rear axle, Goodyear 315/70R22.5 KMAX D G2 Drive-Short haul TL Main wheelbase, 3,900 mm Axle ratio, i = 2.31 Fuel tank capacity 580 l, left Fuel tank capacity 580 l, right AdBlue tank capacity 80 l, left Road speed limiter, adjustable, limiter (engine speed regulation) Technology MMT infotainment system, Advanced Basic MAN TeleMatics Exterior Front headlights, LED Daytime driving lights, LED Fog lights, LED Contour lights, bulb, 2 units Roof spoiler, 600 mm adjustment range Side flaps, left folding and right fixed

Condition: used, functionality: fully functional, mileage: 5,00,879 km, power: 346 kW (470.43 HP), first registration: 08/2022, fuel type: diesel, overall weight: 8,088 kg, axle configuration: 4x2, wheelbase: 390 mm, color: white, gearing type: automatic, emission class: euro6, Year of construction: 2022, number of cylinders: 6, cubic capacity: 12,419 cm³, steering wheel position: left, Equipment: full service history, power assisted steering, Features MAN EfficientCruise 3. Large cab capacity with high roof GX. Battery, 12 V, 230 Ah, 2 units, maintenance free. Diesel engine MAN D2676 LFAI, 346 kW (470 hp) output, 2,400 Nm torque, Euro 6e. Hnsdpfjy Sfd Sex Am Dsl Gearbox MAN TipMatic 12.26 DD. Advanced Emergency Brake Assist (EBA). Driver comfort Air-conditioning system, Climatronic. Comfort driver's seat, air-sprung, with lumbar support and shoulder adjustment. Co-driver's seat, not sprung, length and backrest adjustment. Bunk, top, with slatted support. Bunk, bottom, with slatted support. Auxiliary water heater 4 kW (night heater). Fridge and drawer, 1 unit, centre area, to rear. Technical specifications Continental VDO 4.1 smart tachograph version 2 - legal demand from 21/08/2023 Front axle tyres - 315/70 R22.5. Rear axle tyres - 315/70 R22.5. JOST JSK 37 C 2 fifth-wheel coupling. Main wheelbase, 3,900 mm. Fuel tank capacity 580 l, left, alum. AdBlue tank capacity 80 l, left, plastic. Fuel tank capacity 580 l, right, alum. Road speed limiter, adjustable, limiter (engine speed regulation). Technology MMT infotainment system, Advanced Basic. MAN TeleMatics. Exterior Front headlights, LED. Daytime driving lights, LED. Fog lights, LED. Cornering light, LED. Roof spoiler, 600 mm adjustment range. Side flaps, left folding and right fixed.

Condition: new, functionality: fully functional, Year of construction: 2026, Dry and Wet Ball Mill: Structure, Operation, and Technical Details A ball mill is a fundamental grinding device used in mineral processing, cement manufacturing, chemical production, and other industrial applications. It works by rotating a cylindrical shell filled with grinding media—usually steel balls—causing impact and friction that reduce materials to fine powder. Based on the grinding environment, ball mills are classified into dry and wet types, each suited for specific materials and process requirements. Working Principle Both dry and wet ball mills operate on the same mechanical principle. The rotating cylinder, driven by a motor through a gear system, lifts the grinding media and material along the inner wall. As the rotation continues, the balls fall under gravity, striking and grinding the material. The difference lies in the presence or absence of a liquid medium during grinding. Dry Ball Mill A dry ball mill is used when the material must remain moisture-free or when water could affect product quality. It is commonly applied in cement clinker, limestone, quartz, and refractory material grinding. The discharge can be either grate type or overflow type, depending on the desired fineness. Technical Features: Feeding size: ≤25 mm Discharge size: 0.075–0.4 mm Capacity: 0.65–90 t/h Liner material: High manganese steel or wear-resistant alloy Drive system: Gear-driven or direct-coupled motor Dust control: Equipped with air exhaust and dust collector Advantages: Suitable for materials sensitive to moisture No drying process required after grinding Lower corrosion risk and simpler maintenance Easier material classification and separation Limitations: Dry grinding produces more dust and heat, requiring efficient ventilation and dust collection systems. Wet Ball Mill A wet ball mill operates with water or another liquid medium added to the material. The slurry formed during grinding improves efficiency by reducing friction and preventing excessive heat buildup. It is widely used in ore beneficiation, ceramics, and chemical industries. Technical Features: Feeding size: ≤25 mm Discharge size: 0.074–0.2 mm Capacity: 0.65–615 t/h Liner material: Rubber or high-chromium steel Discharge method: Overflow or grate type Auxiliary equipment: Classifier, pump, and thickener for slurry circulation Advantages: Higher grinding efficiency and finer particle size Reduced dust and noise levels Continuous operation suitable for beneficiation circuits Better control of particle uniformity Limitations: Requires drying if the final product must be in powder form and involves more complex slurry handling. The selection between dry and wet grinding depends on the material characteristics, downstream process, and environmental conditions. Dry mills are preferred for materials that must stay moisture-free, while wet mills are ideal for fine grinding and slurry-based processes. Conclusion Hnodpfx Ajq Nx Aljm Dol Dry and wet ball mills share the same mechanical structure but differ in their grinding environment and application scope. The dry type offers simplicity and low maintenance for moisture-sensitive materials, while the wet type provides higher efficiency and finer output for mineral and chemical processing. Understanding their technical parameters and operational differences ensures optimal equipment selection, improved productivity, and reliable performance in industrial grinding operations.

Condition: used, Year of construction: 2021, JAKA Zu12 Payload: 12 kg, Weight: 41 kg, Reach: 1327 mm Human-robot-environment collaborative integration Payload 12 kg, Self-weight 41 kg, Reach 1327 mm Integrated joint design, easy to assemble and disassemble Higher payload and longer arm span, competent for heavy manual labor tasks Adhering to the concept of ""human-robot-environment collaborative integration"", high safety design eliminates the need for isolation fenc Hnjdoyy Ny Hepfx Am Dol

Condition: used, functionality: fully functional, mileage: 3,87,453 km, power: 331 kW (450.03 HP), first registration: 06/2023, fuel type: diesel, overall weight: 8,269 kg, axle configuration: 4x2, wheelbase: 385 mm, color: white, gearing type: automatic, emission class: euro6, Year of construction: 2023, number of cylinders: 6, cubic capacity: 12,800 cm³, steering wheel position: left, Equipment: full service history, power assisted steering, Features Predictive Powertrain Control (PPC). Cruise control. L-cab BigSpace, 2.50m, level floor. AGM-Batteries, 2 x 12 V/220 Ah, maintenance-free. Engine OM471, inline 6, 12.8 l, 330kW (449hp),2200 Nm. EURO 6. Hnedpfsy Rtb Nox Am Dsl Automatic gearbox. Mercedes PowerShift 3. Transmission G211-12/14.93-1.0. High Performance Engine Brake. Advanced Emergency Brake System AEBS Driver attention support Driver comfort Automatic climate control. Driver's suspension seat, comfort. Armrests on both sides, co-driver's seat. Luxury top bunk, narrow. Luxury bottom bunk. Auxiliary hot water heater, cab. Pull-out refrigerator, under lower bunk. Technical specifications Continental VDO 4.1 smart tachograph version 2 - legal demand from 21/08/2023 Stability Control Assist (ESP). Lane Keeping Assist. Active Brake Assist 5. Front axle tyres 315/70 R22.5. Rear axle tyres 315/70 R22.5. Drive axle ratio 2.41 Fifth-wheel coupling ex factory, standard, Jost JSK 37C. Height = 150 mm. Wheelbase 3850 mm, wheel arrangement 4x2. Tank 790l+120l AdBlue,left,735x700x2170,alu.,step. Lockable. Second tank, 430 l, right,735 x 700 x 1000 mm,alu. Lockable. Speed limiter, 80 km/h. Technology Truck Data Center 7. Interface for fleet management system FMS. Exterior LED main headlamps. Foglamps, halogen. LED daytime running lamps. MirrorCam

Condition: new, Year of construction: 2026, control type: NC control, degree of automation: automatic, actuation type: hydraulic, power: 22 kW (29.91 HP), Equipment: CE marking, emergency stop, foot remote control, CRONOSSTECH PKH 160 Profile Bending Machine The CRONOSSTECH PKH 160 model offers maximum efficiency in heavy-duty profile bending applications thanks to its robust construction and powerful hydraulic system. All three rolls are driven, enabling stable and precise bending without slippage. Key Advantages - Three rolls driven by hydraulic motors - High-strength, durable construction - Horizontal and vertical operating capability - Digital displays for precise bending - Heavy-duty industrial application Areas of Use - Steel construction fabrication - Tube and profile bending applications - Machinery and equipment manufacturing - Shipyard and marine industry - Automotive and auxiliary industries Standard Features - Welded steel frame construction - Three rolls driven by hydraulic motors and planetary gearboxes (individual planetary gear for each roll) - Hardened and ground shafts made from special high-strength materials - Hardened standard rolls - Mobile and independent control panel - Horizontal and vertical working positions - Dual-speed operating system - Digital displays (2 units) Hedpfx Aey Hgwism Dsnl - Three-way hydraulic side supports Optional Features - Special rolls, bending and reducing tools - NC control system Technical Specifications – PKH 160 - Roll diameter: Ø160 mm - Roll bearing diameter: Ø500 mm - Working speed: 3 – 6 m/min - Motor power: 22 kW - Machine length: 2500 mm - Machine width: 2350 mm - Machine height: 2600 mm - Weight: 10,700 kg Production Note: This machine is manufactured by CRONOSSTECH in Turkey. It is designed in line with high-quality standards and is suitable for industrial use.

Condition: new, Year of construction: 2025, pressing force: 160 t, stroke length: 200 mm, table width: 750 mm, table length: 1,100 mm, warranty duration: 24 months, Equipment: safety light barrier, An eccentric press is a type of mechanical press powered by force generated through an eccentric mechanism, used in cold forming operations such as punching, cutting, and die forming. H-type (straight-side) eccentric presses provide high stability and process reliability thanks to their rigid frame design. The CRONOSSTECH CEHP-TB-160 – H-Type Eccentric Press 160 Ton is engineered for stable performance in high-volume production, with a focus on die protection and operator safety. Featuring a monoblock frame, 8-point guided slide system, hydraulic overload safety, and automatic lubrication infrastructure, it delivers reliable performance suited to continuous production conditions. Key Advantages - Stable and repeatable production with a 1100×750 mm table size - Die/equipment protection with hydraulic overload safety - Controlled, user-friendly operation via PLC and touchscreen display - Enhanced operator safety with light curtain safeguarding - Low maintenance requirements thanks to automatic lubrication Applications - Punching / cutting / forming with dies - Series production with automated feeding lines - High-volume manufacturing processes ✅ STANDARD FEATURES • Steel construction frame • Pneumatic clutch and brake • T-slotted auxiliary platen • 8-point guided slide • Adjustable stroke on single connecting rod • Counterbalance piston on slide • Fully automatic micro-lubrication system • PLC control system • Grand piano-style control panel • Touchscreen LCD display • Motor reverse function • Hydraulic overload safety device • Motorized slide adjustment mechanism • Light curtain safety system • Enclosed gear unit in oil reservoir • Dual-coil safety valve • CE compliant ✅ OPTIONAL FEATURES Hsdpox N Sblefx Am Dsnl • Press feeding systems • Scrap discharge systems • Sliding safety cover in front of the table • Custom die options ✅ TECHNICAL DATA (CEHP-TB-160) Capacity: 160 Ton Table–Ram Distance: 500 mm Housing Width: 1130 mm Ram Adjustment: 120 mm Press Width: 2700 mm Press Depth: 2200 mm Press Height: 4600 mm Table Size: 1100×750 mm Ram Face Size: 1100×750 mm Stroke (Fixed): 200 mm Motor Power: 22 kW Weight: 18,000 kg ✅ MANUFACTURING / SUPPLY NOTE This machine is manufactured by CRONOSSTECH in Türkiye. Sales, commissioning, and after-sales processes are managed by CRONOSSTECH.

Condition: new, Year of construction: 2025, pressing force: 500 t, stroke length: 1,000 mm, table width: 1,200 mm, table length: 1,500 mm, operating pressure: 250 bar, Equipment: documentation/manual, safety light barrier, CRONOSSTECH CHP 500 H-Type Single-Acting Hydraulic Press – 8-Guided Slides General Description The CRONOSSTECH CHP series H-type single-acting hydraulic presses are high-rigidity industrial press solutions developed for sheet metal forming, straightening, assembly, and die pressing applications. The 8-guided H-frame structure ensures stable and repeatable operation by evenly distributing the high loads generated during pressing. The CHP 500 model is designed for long-lasting and reliable performance in heavy-duty manufacturing processes requiring high tonnage. CHP Series – Structural Features CHP series presses are engineered with heavy-duty operation in mind. The frame and supporting components are stress-relieved using vibration methods. Bronze Zr14 slide bearings provide uniform load distribution and long-term precision throughout the ram movement. ⚙️ Standard Equipment - Steel construction, H-type frame with 8 robust slide guides - Vibration stress-relieved frame and carrier components - Bronze Zr14 slide bearings - WPQR & WPS certified welding applications, accredited by TÜRK-AK (EN ISO 15614-1:2017 / EN ISO 14731) - Machine body designed and manufactured in compliance with CE standards - PLC-controlled hydraulic system - Touch panel display (DELTA 7”) - Adjustable ram stroke and tonnage control - Automatic lubrication system - Electronic filter contamination alert - On-screen hydraulic unit oil temperature and system status monitoring - Cooling system - Off-line filtration - Dual-hand control system - Light curtain (operator safety standard) - SIEMENS – SCHNEIDER electrical components 📐 Technical Specifications – CHP 500 Hodpfxjx N T H Aj Am Dsnl - Type: Steel construction, 8-guided H-type press frame - Frame Material: St52 – ERDEMİR - Slide Bearings: Bronze Zr14 - Capacity (Ram): 500 tons - Moving Table Dimensions: 1200 × 1500 mm - Fixed Table Dimensions: 1200 × 1500 mm - Parallelism Tolerance: 120 micron/meter - Perpendicularity Tolerance: 60 micron/meter - Stroke (Ram): 1000 mm - Min. Daylight Opening: 100 mm - Max. Daylight Opening: 1100 mm - Stress Relief: Vibration stress-relieving - Welding Application: WPQR and WPS certified by TÜRK-AK under EN ISO 15614-1/2017, welding applications supervised by certified welding coordination engineers in accordance with EN ISO 14731 - Max. Operating Pressure: 250 bar - Total Motor Power: 45 kW – IE3 - Main Pump: 70 cm³ – REXROTH or PARKER - Moving Table Fast Down Speed: 150 mm/sec - Moving Table Drawing Speed: 12 mm/sec - Moving Table Return Speed: 170 mm/sec - Main Cylinder Bore: Ø500 mm – Ck45 - Auxiliary Acceleration Cylinders: 2 pcs - Approx. Height: 5800 mm - Approx. Width: 3250 mm - Approx. Depth: 2200 mm - Bottom Table Height from Floor: 1400 mm - Front Fill Valve: NG 150 - Hydraulic Unit: REXROTH or PARKER - Cooling System: EMMEGI – CIESSE – PARKER - Off-line Filtration: REXROTH or PARKER - Linear Position Transducer: NOVATECHNIK or TURCK - PLC: DELTA - Touch Panel Display: DELTA 7” - Switchgear: SIEMENS – SCHNEIDER - Approximate Weight: 23 tons Manufacturing Note This machine is manufactured by CRONOSSTECH in Turkey.

Condition: new, Year of construction: 2025, pressing force: 1,000 t, stroke length: 1,000 mm, table width: 1,500 mm, table length: 2,000 mm, operating pressure: 250 bar, Equipment: documentation/manual, safety light barrier, CRONOSSTECH CHP 1000 H-Type Single-Acting Hydraulic Press – 8-Guided General Description The CRONOSSTECH CHP series H-type single-acting hydraulic presses are designed for sheet metal forming, deep drawing, straightening, and heavy-duty pressing applications requiring high tonnage. The 8-guided H-frame structure distributes the high forces generated during pressing evenly, ensuring maximum rigidity, precision, and long service life. The CHP 1000 model has been developed to deliver reliable and stable performance for heavy industry production lines. CHP Series – Structural Features CHP series presses are engineered with heavy-duty industrial conditions in mind. The frame and main carrier constructions are stress-relieved by vibration. Thanks to bronze Zr14 slide bushings, even load distribution and high precision are achieved throughout ram movement. ⚙️ Standard Equipment - Steel construction, 8-guided H-type press frame - Vibrationally stress-relieved frame structure - Bronze Zr14 slide bushings - WPQR & WPS certified welding applications accredited by TÜRK-AK (EN ISO 15614-1:2017 / EN ISO 14731) - Design and manufacturing in compliance with CE standards - PLC controlled hydraulic system - Touch panel display (DELTA 7”) - Adjustable ram stroke and tonnage control - Automatic lubrication system - Electronically monitored filter contamination warning - Monitoring of hydraulic unit oil temperature and system status via display - Cooling system - Off-line filtration - Dual-hand control system - Light barrier (standard for operator safety) - SIEMENS – SCHNEIDER electrical components Hnjdex N T Rbjpfx Am Dol 📐 Technical Specifications – CHP 1000 - Type: Steel construction, 8-guided H-frame press type - Frame Material: St52 – ERDEMİR - Slide Bushings: Bronze Zr14 - Capacity (Ram): 1000 Tons - Movable Table Dimensions: 1500 × 2000 mm - Fixed Table Dimensions: 1500 × 2000 mm - Parallelism Tolerance: 120 micron/m - Perpendicularity Tolerance: 60 micron/m - Stroke (Ram): 1000 mm - Min. Daylight: 100 mm - Max. Daylight: 1100 mm - Stress Relieving: Vibration stress relief - Welding: TÜRK-AK accredited WPQR and WPS certified EN ISO 15614-1/2017 welding applications - Max. Operating Pressure: 250 Bar - Total Motor Power: 75 kW – IE3 - Main Pump: 70 cm³ – REXROTH or PARKER - Movable Table Rapid Down Speed: 150 mm/sec - Movable Table Forming Speed: 12 mm/sec - Movable Table Return Speed: 170 mm/sec - Main Cylinder Inner Diameter: Ø500 mm – Ck45 (2 units) - Auxiliary Acceleration Cylinders: 2 units - Approximate Press Height: 6000 mm - Approximate Press Width: 3450 mm - Approximate Press Depth: 2400 mm - Height of Lower Table from Floor: 1450 mm - Pre-fill Valve: NG 200 - Hydraulic Power Unit: REXROTH or PARKER - Cooling System: EMMEGI – CIESSE – PARKER - Off-line Filtration: REXROTH or PARKER - Linear Position Sensor: NOVATECHNIK or TURCK - PLC: DELTA - Touch Panel Display: DELTA 7” - Electrical Components: SIEMENS – SCHNEIDER - Approximate Weight: 55 Tons Production Note This machine is manufactured by CRONOSSTECH in Turkey.