Used Bain Marie for sale (77)

Condition: refurbished (used), functionality: fully functional, machine/vehicle number: A95109671Pxxx, volume flow: 213 m³/h, operating pressure: 3 bar, final pressure: 4 bar, input voltage: 400 V, input frequency: 50 Hz, input current: 31 A, type of input current: AC, type of cooling: air, rotational speed (max.): 2,960 rpm, protection type (IP code): IP55, Used, completely overhauled pump in very good condition Fpsdpfx Aeynxhhja Neg

Condition: refurbished (used), functionality: fully functional, machine/vehicle number: A98341216P217330003, volume flow: 213 m³/h, operating pressure: 3 bar, final pressure: 4 bar, input voltage: 400 V, input frequency: 50 Hz, input current: 31 A, type of input current: AC, type of cooling: air, rotational speed (max.): 2,955 rpm, protection type (IP code): IP55, Used, completely overhauled pump in very good condition Fsdpfjynxg Rox Aa Njpg

Condition: refurbished (used), Série n° 30 389 Machine reconstruite avec : Fsdpfx Asir Imcea Nspg - Moteur des avances et vitesses broches AC - PLC Siemens Simatic HMI - Armoire électrique neuve siemens - Porte barre et son support - 6 tubes d'avance - 6 tubes de serrage - Appareillages en option - Machine au normes C

Condition: excellent (used), - Chip conveyor with extractable tray - 4 cross slides pos 1,2,5,6 - AC motors for spindle speeds and feeds - New Siemens electrical cabinet Fpsdpfxoq Tq Ims Aa Nog - Siemens PLC 7.300 control panel - Machine with hydraulic pick-up and hydraulic cross slide - Tool holders and equipment on request Jfghuc9 Cycle time studies and part set-up on request.

Condition: excellent (used), MORI-SAY 6/32 rebuilt in standard configuration with : - 4 composite slides at stations 1-2-4-5 with independent movement - SIEMENS model S5 Simodrive motors for feed speed conditions Chip conveyor : Removable tank with chip conveyor Pick-up : Synchro pick-up Pick-up brake Hydraulic slide for rear machining Fsdpsmhfxmefx Aa Nopg Other accessories and special accessories on request

Year of construction: 2002, condition: excellent (used), 3D coordinate measuring machine in post and beam construction *On-floor installation on steel feet *Height floor to measuring plate: 650 mm Measuring range X 2.100 , Y 1.600 , Z 2.100 [mm] Uncertainty of measurement 25 + L/70, max. 50 [µm] at L=3,000 mm Dynamics 3D traverse speed 220 mm/sec 3D acceleration 1000 mm/sec² Touch probe Renishaw PH10M Renishaw TP20+2 modules Control system Pantec Eagle Pro / WPC2040 Joystick HT400 Fpsdpfx Aohlqapoa Nsg Software POLYWORKS Inspector (alternative possible) Optional technologies MCR20 stylus changing bank Services of the supplier Transport, commissioning , calibration , final inspection Warranty 12 months from the date of acceptance

Condition: excellent (used), Year of construction: 2008, functionality: fully functional, Equipment: type plate available, Fast precision coordinate measuring machine and gear measuring center. Moving gantry with patented TRICISION™ technology X 900 / Y 1500 / Z 700 B5 control system (retrofit 2021) High-resolution Leitz LSP-S2 3D measuring head Measurement uncertainty according to DIN EN ISO 10360-2: 0.9 + L/350 µm Fpodsv S Dk Ejpfx Aa Neg 8-position probe change system Large package with probe accessories PCDMIS CAD++ 2024 software 12-month warranty Computer, 32" screen Installation, commissioning, and acceptance according to DIN EN ISO 10360-2, 4, and 5

Year of construction: 2008, condition: excellent (used), ZEISS ACCURA 16.24.10 RDS-CAA X 1,600 / Y 2,400 / Z 1,000 Fodpfx Ajnp Hvuea Nepg RDS CAA touch probe with VAST XXT technology Stylus changing system 8 positions Control C99 Software on request - Calypso / HolosNT Warranty 12 months Installation, commissioning, acceptance according to DIN EN ISO 10360-2,4,5

Year of construction: 2004, condition: excellent (used), 3D coordinate measuring machine in post and beam construction *On-floor installation on steel feet *Height floor to measuring plate: 600 mm Measuring range *X 3.200 , Y 1.600 , Z 1.800 [mm] Uncertainty of measurement *30 + L/40, max. 60 [µm] at L=3,000 mm Dynamics *3D-travel speed 220 mm/sec *3D acceleration 1000 mm/sec² Touch probe *Renishaw PHS / alternatively PH10M *Renishaw TP20+2 modules Control system *Pantec Eagle Pro Radio control unit *Hand control HT400 Software POLYWORKS Inspector Optional technologies MCR20 stylus changing bench Stylus changing bank ACR3 Optical scanner KREON or NIKON Services of the supplier transport, commissioning , calibration , final inspection Warranty 12 months from the date of acceptance Fjdpfehlqknox Aa Nopg

Year of construction: 2013, condition: like new (used), 3D coordinate measuring machine in portal design * precise CMM with strong performance * touch probe TESA-STAR-M (motorized), 7.5° indexable Measuring range * X 900 , Y 1.500 , Z 800 [mm] Uncertainty of measurement * 2.7 + L/333 , max. 5.0 [µm] Dynamics (without active vibration isolation) * 3D travel speed 300 mm/sec Fpodpfsh T Dz Ajx Aa Nsg * 3D acceleration 1.5 m/sec² Touch probe * TESA STAR M - motorized * Renishaw TP20 / TP200 Control system * Hexagon DC240 - Software * PCDMIS CAD++ 2021 * incl. CAD interface CATIA V5 (import) accessories : * stylus set , extensions , modules Optional services * We offer transport, commissioning, acceptance, calibration * Calibration according to DIN EN ISO 10360-2 Warranty * 12 months from date of acceptance

Year of construction: 2016, condition: like new (used), Double column CMG *Installation in floor level design Measuring range * X 6,000 , Y 1,600 , Z 2,500 [mm] * Overlap of the uprights in Y = 100 mm Uncertainty of measurement single column : 25 + L/70, max. 60 [µm] at L=6.000 mm Double stand : 50 + L/70, max. 100 [µm] at L=6,000 mm Dynamics 3D traverse speed 400 mm/sec 3D acceleration 1200 mm/sec² Touch probe (per column) * Renishaw PH10M * Renishaw TP20+2 modules Fpodpfoh T U Dfsx Aa Neg Control system (per stand) * WENZEL WPC2040 (Pantec Eagle Pro) Radio control unit * Hand control HT400 Software * POLYWORKS * alternative solutions possible Accessories * Calibration ball holder - 3 times equipped * stylus assortment * TP-20 modules * Calculator , Screen Keyboard (per stand) Services of the supplier * transport, commissioning , calibration , final inspection Warranty * 12 months from the date of acceptance

Condition: like new (used), Year of construction: 2001, Set of clamping cones SK 50 - like new. Hardly used. Fodpfx Aaoxnldzo Njpg

Condition: used, Year of construction: 1997, functionality: not functional, The following parts from a Chiron FZ 12 SM, year 1997, are for sale: 9 pcs. tool arms 1 pc. spindle 1 pc. spindle motor Fsdpfxoxdhp Es Aa Nepg

Condition: new, Year of construction: 2023, Number of spindle: 6 Max bar diameter: 32/42 mm Fpedpfx Askvnvvja Nsg Max. feeding length: 150 mm Spindle speed: max 5.000 rpm This machine combines the high productivity and robustness of the cam-operated multi-spindle with the advantages of numerical control, which has been made easy for the operators to use. The machine is equipped with a Siemens 840D Solution line dual NC for the control of 24 basic axes and 20 additional axes as an option. The 6 independent spindles with AC motors have a power of 7 kW allowing the machining of difficult materials.

Condition: excellent (used), Year of construction: 2016, 3x MACHINES : GM20CNC YEAR : 2016 DESCRIPTION: Machine with original NC Gildemeister SIEMENS SINUMERIK CNC 840D - CN slide station 4 and 5 Fodpovcmfajfx Aa Njpg - CN hydraulic pick-up, advance, rotation, stop - Double slide pos 6, - Mechanical cutting slide Fxtillqon - CN rework slide + 2 indexing tools - Micrometric slide pos3 - Central block control - 25 mm passage KNOLL HP + FILTRATION + COOLING pump type: FKA/2550 Dnj0ed KNOLL pallet chip conveyor Loader : - IEMCA PRA 52/38P

Condition: new, MANURHIN K'MX 620 is designed for the productive machining of workpieces consisting of bars with a maximum diameter of 20 mm. The machine is equipped as standard with two electro-spindles with a maximum speed of 12,000 rpm and a rotating guide bush synchronised with the main spindle by means of pulleys and belts. Main features: - Max. bar material diameter 20 mm Fodpfx Aaouqngqo Nopg - 12,000 rpm on both spindles - Main spindle power 3.7/5.5 kW - Spindle travel 210 mm - Number of tools in the cut at the same time: 2 - Power of rotating tools: 2kW - Number of stations: 22, 9 of which can be motorised

Condition: excellent (used), Year of construction: 1993, - Gildemeister original pneumatic pick-up Fsdpjkwcx Sofx Aa Njpg - Oscillating arm of resumption passage 25 - 1 detector for drill bit breakage - Bar drop exclusion cylinder - Balluff BMC 8 - Bar loader IEMCA PRA 52/31 P

Condition: new, Year of construction: 2023, The K’MX 920 CLEVER sliding headstock automatic lathe is designed for machining complex workpieces up to Ø 20 mm. The lathe is equipped as standard with two electrospindles with a maximum speed of 12.000 rpm each. With its nine axes, comb + turret on three axes and independent end unit, this machine is capable of having four tools in the material for an optimised cycle time. 9 linear axis Fpsdok Dz Dijpfx Aa Neg 1 independent rack with 10 positions Cross-section of outer tools 12 x 12 mm Turret number of stations 12

Condition: used, Year of construction: 2006, Used INDEX MS 32 C lathe Equipment: -2 NCU -SIR MS32P with shelves, length 3300 mm, screwed rails -Counter spindle -KNOLL complete with 1 HP pump -Bar stop control -Programmable inputs/outputs -4 tool breakage checks -1 NCU1 and 3 NCU2 rotary tool drives -1 WTO stroke doubler, 3 positions, motorized on station 1 -2 drilling units with 6044 motor sold with the machine. -Transmit Equipment listed below with : CNC axis: 1.1 XZ 1.2 Z 2.1 Z Fodexgh Elspfx Aa Njpg 2.2 XZ 3.1 XZ 3.2 XZ 4.1 XZ 4.2 XZ 5.1 XZ 5.2 XZ 6.1 XZ 6.2 XZ

Condition: new, Year of construction: 2024, -10 linear axes - Ultra-powerful clamping - Rework spindle and its dedicated 9-position carriage (X4) enable you to carry out complex operations in masked time. - Spindle capacity: 8000 rpm Fedpfx Asu Ik Tioa Njpg - Oil-cooled electro-spindle - Latest-generation FANUC 31i numerical control - Compact cast-iron structure

Condition: new, K’MX EVO with 7 axes has been designed for machining of parts from Ø 3 to Ø 32 mm. The highlight of this series is 2 oil-cooled electrospindles (built-in motor), with a power output of 10.5 kW on the main spindle. The stroke of the spindle is up to 400 mm. The two separate tools racks can simultaneously machining (ex roughing and finishing). The two separate tools racks can simultaneously machining (ex roughing and finishing). Optionally, both linear slides are equipped with driven tools to perform simultaneous drilling and milling. These 2 tools racks are complemented by end working attachment for internal operations with the possibility to turn simultaneously on the main and sub-spindle. In optional, possibility to mill thanks to ddriven tools. The large space permits better chip evacuation and maximum accessibility. - Rigid - Large working space - Up to 4 simultaneous cutting tools in contact Fsdpfx Aaeunr H Ae Nopg - 2 independent racks with 5 positions

Condition: new, K’MX EVO with 7 axes has been designed for machining of parts from Ø 3 to Ø 32 mm. The highlight of this series is 2 oil-cooled electrospindles (built-in motor), with a power output of 10.5 kW on the main spindle. The stroke of the spindle is up to 400 mm. The two separate tools racks can simultaneously machining (ex roughing and finishing). The two separate tools racks can simultaneously machining (ex roughing and finishing). Optionally, both linear slides are equipped with driven tools to perform simultaneous drilling and milling. Fodpeuq A D Rsfx Aa Njpg These 2 tools racks are complemented by end working attachment for internal operations with the possibility to turn simultaneously on the main and sub-spindle. In optional, possibility to mill thanks to ddriven tools. The large space permits better chip evacuation and maximum accessibility. - Rigid - Large working space - Up to 4 simultaneous cutting tools in contact - 2 independent racks with 5 positions

Condition: excellent (used), Multispindle lathe GILDEMEISTER GM 35 with spindle stop n°4901/0067 with bar loader Giovanni DMB36 year 1999 n°DBM99294 - Hydraulic pick-up Fodpfoix I Dgjx Aa Nopg - Back burring slide - 5 front spindles - 4 long turning slides pos.1, 2, 4, 5 - Part catcher - End of bar catcher - Swarf conveyor - Part belt conveyor

Condition: refurbished (used), MORI-SAY 6/32 check over in standart configuration complete with : - 4 compound slides at stations 1-2-4-5 with independent movement Fpodpoun Sfxofx Aa Neg - SIEMENS model S5 Simodrive motors for conditions feed speed ranges Chips conveyor : Removable tank with swarf conveyor Pick-up : Synchro pick-up Pick-up brake Hydraulic slide for back machining Other attachments and special attachments on request

Condition: new, MANURHIN K'MX 520 is designed for the productive machining of workpieces consisting of bars with a maximum diameter of 20 mm. The machine is equipped as standard with two electrospindles with a maximum speed of 12,000 rpm and a rotating guide bush synchronised with the main spindle by means of pulleys and belts. Five CNC linear axes (X1, Y1, Z1, X2, Z2), two rotary axes (C1, C2). Fjdpfjuqirbjx Aa Njpg Main features : - Max. bar material diameter 20 mm - 12,000 rpm on both spindles - 8,400 rpm driven tools - Main spindle power 3.7/5.5 kW - Headstock travel 210 mm - Number of tools in the cut at the same time: 2