Used Sterilization for sale (203)

Year of construction: 1995, condition: used, This filter system may only be used to filter preclarified products that have normal filterable properties in their composition. Max. filtration flow: 400 hl/h continuous Permissible operating pressure: 6 bar Permissible operating temperature: 105 °C Volume: 1456 l Current: 10 A Voltage: 220 V Water: cold water: min. 150 hl/h; hot water (max 65 °C): min. 150 hl/h Godovcqv Nspfx Anxoub Compressed air: prepared compressed air: 4 - 6 bar; control air: 5 - 8 bar Weight: 3450 kg Base construction: basic frame with control and measuring components and filter container; cleaning module Features: 98 filter cartridges, 3 piston diaphragm pumps (Dosage), centrifugal pump with frequency converter (WT circuit), various analog and digital sensors (flow, pressure, level, temperature, conductance), various valves, control cabinet

Year of construction: 2001, condition: used, The Pall CFS system is designed as a single unit and can be installed directly in front of the filling line without the need for a buffer system. It is a completely independent process unit consisting of the following components: filter vessel Piping and connections Membrane cleaning system (CIP) integrity check Switchboard The hygienic design, the simple integrity test and the full automation ensure the microbiological safety of the system and usually allow the operation of the filling staff. Cluster filtering groups filter elements into clusters. Each cluster has its own outlet valve. During filtration, all clusters are open. Cleaning, sterilization and integrity testing are performed per cluster. Advantages of the CFS principle; Longer life Integrity testing on site Integrity diagnostics per cluster Special rinsing High specific flow rate Short flush times Constant flow in all candles Minimal water consumption Quick replacement of filter elements Controlled backwash Minimal beer loss High biological safety Constant availability With this filter system only preclarified products may be filtered, which have normally filterable properties in their composition. Max. filtration flow: 400 hl/h continuous Permissible operating pressure: 6 bar Permissible operating temperature: 105 °C Volume: 1456 l Current: 10 A Voltage: 220 V Water: cold water: min. 150 hl/h; hot water (max 65 ° C): min. 150 hl/h Compressed air: prepared compressed air: 4 - 6 bar; control air: 5 - 8 bar Length: 1,40 m Width: 1,20 m Height: 1,85 m Weight: 3450 kg Gjdpfsvcqx Dsx Anxsub Base construction: basic frame with control and measuring components and filter container; cleaning module Features: 98 filter cartridges, 3 piston diaphragm pumps (Dosage), centrifugal pump with frequency converter (WT circuit), various analog and digital sensors (flow, pressure, level, temperature, conductance), various valves, control cabinet

Year of construction: 2017, condition: used, machine/vehicle number: AT102, Used Tetra pak Sterilizer UHT 5000 LPHTechnical Specifications & Performance DataThis UHT Sterilization System Steritherm is designed for high-throughput thermal processing of liquid foods and beverages, delivering consistent ultra-high-temperature treatment for aseptic downstream packaging. Manufactured by Tetra Pak engineering, the unit offers dependable performance for beverage production and industrial packaging environments where hygiene and reliability are critical.Manufacturer: Tetra PakModel: VTIS-C4 SterithermManufacturing year: 2017Process capacity: 5000 L/hSystem configuration: UHT system with homogenization, heat exchange, pump station, CIP regulator, and computer controlHomogenizer: SHL-20, max pressure 250 bar, capacity aligned to 5000 L/hPlate heat exchanger: H7-RC, volume 198 L, max working pressure 10 bar(g), max working temperature 140 °C, test pressure 13 bar(g)Pump station: sanitary centrifugal pumps including LKH-10 (2018) and LKH-107, plus NM038 monopumpRated operating envelope: high-temperature operation up to approximately 148 °C with vacuum and overpressure capability (application dependent)Electrical frequency: 50 HzAdvanced Automation & Control SystemsThe system includes an integrated computer control platform for precise process management. Automated temperature, flow, and holding-time control help ensure repeatable UHT performance across batches. A dedicated CIP regulator supports automated cleaning sequences, reducing downtime and enhancing food safety. The control interface facilitates recipe management, alarm handling, and trend visualization to support consistent quality and efficient operations.Computerized process control for UHT parametersAutomated CIP regulationProcess monitoring with configurable setpoints and alarmsDesigned for quick startup and stable thermal profilesProduction Line Integration CapabilitiesThis second hand UHT unit integrates seamlessly with upstream raw product handling and downstream aseptic tanks or fillers. It is suitable for standalone operation or as part of a used bottling line for beverage production. With a capacity of 5000 L/h, it supports medium-scale throughput and can be configured to match a range of product viscosities and process requirements.Inline or standalone operation modesInterfaces for feed, recirculation, and product dischargeCompatible with aseptic storage and filling systemsSuitable for dairy-based drinks, juice, and other liquid foodsMachine Condition & Maintenance HistoryThis is a second hand UHT system offered in working condition and ready for operation, reflecting an industrial design focused on long service life. The pump station includes a 2018 sanitary centrifugal pump as part of the configuration, indicating modernized components within the system. Overall, the unit presents as a robust processing asset for facilities seeking reliable thermal treatment without the lead ti... Gsdpfx Anoyvincexeub

Condition: used, Year of construction: 2008, machine/vehicle number: AT88, Used Tetra Pak Sterilizer + Homogenizer 12000 l/hThe Used Tetra Pak Sterilizer + Homogenizer 12000 l/h processes liquid food products through thermal treatment and homogenization, ensuring high safety and quality standards in industrial production. Since it combines a UHT sterilization system with a high-pressure homogenizer, it delivers optimal processing for various food and beverage applications. Moreover, its design allows easy integration into existing production lines, making it a practical choice for manufacturers.General FeaturesThis system operates at a capacity of 12,000 liters per hour (l/h), providing both high performance and consistent results in thermal treatment and particle size reduction. Tetra Pak, a leading brand in food processing technology, manufactured this unit in 2008, ensuring a balance between proven reliability and advanced engineering. Furthermore, the system’s robust construction guarantees long-term durability, reducing the need for frequent maintenance.Tetra Pak Steritube UHT SterilizerThe Tetra Pak Steritube UHT sterilization unit applies high temperatures to ensure the microbiological stability of liquid products. Because it features a controlled heating system, it keeps the sterilization temperature between 95°C and 138°C, depending on production requirements. In addition, operators can adjust the holding time at multiple levels, choosing between 5, 10, 15 seconds for initial stages and 30, 45, 60 seconds for advanced stages, allowing precise thermal treatment control.To optimize heat transfer, the system regulates hot water flow between 10,500 and 32,000 l/h, ensuring uniform sterilization. As a result, the unit maintains an inlet temperature of 5°C and an outlet temperature between 85°C and 95°C, which provides controlled cooling before further processing. Another key advantage is that its design allows seamless integration with homogenization systems, CIP (Cleaning-in-Place) units, and aseptic packaging lines.Tetra Pak Alex 30 HomogenizerThe Tetra Pak Alex 30 homogenizer operates at pressures up to 250 bar, effectively reducing particle size and improving product stability. Because it processes between 6,000 and 14,000 l/h, it is ideal for enhancing the consistency and quality of UHT-treated liquid products.Additionally, the system features cone valves and pistons made of stainless steel or solid ceramic, ensuring durability and resistance to wear. It also includes grooved and V-type seals, which provide effective sealing and reduce maintenance needs. Since the homogenization process occurs in two stages, the system ensures maximum efficiency. The first stage applies 42% of the pressure, while the second stage handles the remaining 58%, both controlled electronically via VDC signals.Moreover, an ABB M3BP315SMB 4 motor powers the unit with 132 kW output, operating at 380V and 50 Hz, which guarantees reliability and high performance. At the same time, a 7.5V DC thermistor monitors the operating temperature to prevent potential malfunctions. For enhanced safety, the system includes a 24V DC door safety lock and a crankshaft speed sensor to prevent overloads.ConclusionThe Used Tetra Pak Sterilizer + Homogenizer 12000 l/h offers an efficient solution for thermal processing and homogenization of liquid food products. Thanks to its high performance and reliable construction, manufacturers can optimize their... Guodpfx Asv Di Itsnxeb

Condition: excellent (used), Program-controlled pasteurizer for fruit juices and cremogenates with indirect heating and a regenerative heat exchanger circuit, including a CIP connection. Features: *Production: 30,000 l/h depending on the product. *Number of tubes: 94. Gsdpjwnzcpofx Anxeub *Includes Simens Simatic control panel. *Max. viscosity: 25 cp/10°C *Max. pulp percentage: 89% *Max. fiber length: 6-8 mm.

Condition: excellent (used), Year of construction: 2010, Sterile tank with agitator, temperature-controlled, upright Technical data / dimensions Available quantity: 1 Volume: approx. 6,000 liters Container type: Sterile tank Condition: used Suitable for food: yes Design: upright Diameter inside: approx. 1,700 mm External diameter: approx. 1,854 mm Cylindrical height: approx. 2,264 mm Total height: approx. 5,390 mm Weight: approx. 2,030 kg Specific weight of the medium: 1.0 to/m³ Operating pressure: negative pressure/vacuum Operating pressure: 3.5 bar Test pressure: 5.4 bar Gedpfx Aotyz Izenxjub Wall thickness bottom: approx. 5.2 mm Wall thickness top: approx. 8.4 mm Wall thickness jacket / cylinder: approx. 5.2 mm Ground clearance: approx. 800 mm Operating temperature: 150 degrees Celsius Type plate available Manufacturer: GEA serial no.: 2376 Year of construction: 2010 Material / condition Material inner jacket: V2A (1.4541) Material double jacket: V2A (1.4541) Feet material: V2A (1.4541) Outer surface: bright rolled 2B Internal surface: Ground Ra

Condition: excellent (used), For Sale: Hot-Air Sterilizer / Dryer Chirana HS 62A Gjdpfx Anexz Ah Doxoub I am offering a fully functional Chirana HS 62A hot-air sterilizer for sale. The device is suitable for drying, sterilizing, or performing thermal tests on various materials. It is a robust laboratory unit made in former Czechoslovakia, known for its reliability and simple operation. Technical details: Model: Chirana HS 62A Metal double-wall chamber construction Precise temperature control Suitable for laboratories, production facilities, service workshops, and technical operations Condition: The device is in very good technical condition and ready for immediate use. Price: 300 EUR Location: Ivanka pri Nitre

Condition: like new (used), Year of construction: 2015, operating hours: 100 h, functionality: fully functional, Equipment: documentation/manual, Manufacturer: GEA (TDS) Type: Aseptic Tank Year of manufacture: 2015 With manhole With agitator Including valves Including control cabinet for valves Guedoyrdzbepfx Anxjb Condition: as new, never used

Year of construction: 2006, condition: good (used), Melag Euroklav 23V-S Autoclave The Melag Euroklav 23V-S is a high-performance Class S autoclave specifically designed for the steam sterilization of packaged instruments with simple hollow bodies in medical and podiatric practices. The unit features a simple pre-vacuum and effective vacuum drying to ensure reliable reprocessing. Vacuum System: The VS variant includes a pre-vacuum and vacuum drying to guarantee effective sterilization and drying of packaged instruments. Manufacturer: Melag Type: 32V-S Voltage: 230 V Power: 3000 W Boiler Capacity: 22.6 L Operating Temperature: 144°C Operating Pressure: 0.95–3 bar Cycles: 1038 Year of Manufacture: 2006 Weight: approx. 45 kg Gusdpfsyk E I Hox Anxeb Find more items – new and used – in our shop! International shipping costs on request!

Condition: excellent (used), Binder Type: Binder CB 210 CO² / 9140-0013 Technical data Temperature range 7 °C above room temperature to 60 °C MB1 controller for temperature and CO2 concentration Interior volume: 210 liters Gujdpfx Anorp Enbjxsb External dimensions (W x H x D): 740 x 1069 x 715 mm Internal dimensions (W x H x D): 560 x 750 x 500 mm Weight: approx. 121 kg Condition: used Scope of delivery: (see picture) (Changes and errors in the technical data, specifications are reserved!) We will be happy to answer any further questions you may have on the phone.

Condition: excellent (used), Heraeus drying cabinet hot air sterilizer Here we offer a Heraeus drying cabinet hot air sterilizer. Manufacturer / Type: Heraeus SUT 6060 Features: Temperature range: 250 °C Net volume: 52 litres Gjdpfx Aeg Airfonxjub Weight (empty): 53 kg Internal dimensions: depth 339 mm, width 403 mm, height 380 mm External dimensions: Depth 535 mm, width 744 mm, height 552 mm Rated voltage 230V, rated frequency 50/60Hz, rated current 7.1 A, rated power 1.64 kW Type: SUT 6060 Condition: used / used Scope of delivery: (see picture) (Changes and errors in technical data, specifications are reserved!) Further questions we can answer on the phone for you.

Condition: new, Miltenyi Biotec Sterile Filter Adapter 170-076-610 exp. 2026.02.24 - 50 boxes Gjdpevv Nqfefx Anxoub 5 pcs per box, price is for one box only.

Condition: used, functionality: fully functional, The Terumo SCD IIB Sterile Tubing Welder, P/N 72508 provides reliable, high-quality welds for sterile tubing connections, completes a weld cycle in 30 seconds, is compact and portable, requires minimal technical training and can be implemented seamlessly into existing processes. Tubing requirements: Polyvinyl chloride (PVC) tubing with a nominal outer diameter of 5.46 mm (0.215 inch) and a wall thickness of 0.84 mm (0.033 inch) or C-Flex tubing with a nominal outer diameter of 6.35 mm (0.25 inch and a nominal inner diameter of 3.18 mm (0.125 inch). Good working condition. Please check out our other listings as well. Gujdpfxjuyu N Es Anxsb

Condition: excellent (used), Year of construction: 2001, functionality: fully functional, used LOOS / Bosch steam boiler system, - consisting of 2x steam boiler with gas burners from Weishaupt, feed water tank, feed water pumps, condensate tank, control cabinets, add-on parts, complete documentation available Data LOOS / Bosch boiler: - Type U-HD 800 - 10 bar operating pressure - 800kg/ h steam - Year of construction 2001 Guedpfjqwn Ryjx Anxob Data Weishaupt burner: - Type G5/ 1-D - Version ZMD-LN - min. 160kw max. 830kw - Year of construction 2001 Transportation can be offered. Only serious and serious inquiries will be answered: Name, e-mail address and telephone number.

Year of construction: 2021, condition: excellent (used), functionality: fully functional, We offer a gas sterilizer nastol with neutralizer in perfect condition. Year of production: 2021 Brand: H.W.Andersen Products Limited, Anprolene Model: Anprolene 74i, Abator Anprolene Godpfx Ajukgxxsnxeub

Year of construction: 2015, condition: excellent (used), Reportedly very little used Plümat model BFL 851 automatic machine to fill and close flexible pre-sterilized IV-Bags under pharmaceutical conditions. Made in 2015, the line consists of frame with safety guard, manual bag feeding, printing station, automatic bag infeed, tube cutting station, filling station, tube welding station, tube cooling station, bag outfeed, control cabinet. The filler is a linear single lane system. The system is in compliance with GMP and FDA standards. - processable bag formats (2 tubes = free tube length 30 mm presealed with Vial stopper & 40 mm sealed by welding or open tube): 100 ml, 250 ml and 500 ml - capacity: 100 ml / 250 ml / 500 ml = 600 bags/hour - filling accuracy: 100 ml = ± 2.0 %, 250 ml = ±  1.0 % and 500 ml = ±  0.7 % - dosage range: 100 ml - 1000 ml - welding method used: heat contact welding - filling system: SIEMENS S7 including counter card with mass-flow measuring system and pneumatic filling valves - controller: SIEMENS S7 Microbox with Profibus DP and TP 1500 touch terminal - power supply: 5.5 kW, 230/380 V, 50 Hz - compressed air supply: approximately 700 l/min, min 6 - max 8 bar - cooling water supply: approximately 4 l/min, temperature 18-21°C - weight: approximately 1350 kg (net) and 1750 kg (gross) - dimensions: 4263 (length) x 1050 (width) x 2140 (height) mm Guodpelhqndjfx Anxsb

Year of construction: 2001, condition: used, machine/vehicle number: 010786, -2x Autoclave Getinge GE 2606-1 Gsdpfx Anowx Hwaoxsub -2x Steam generator Getinge 50 liters – 56 kg/h -2x Vacuum pump Sterling SIHI Lema 90 AZ

Condition: ready for operation (used), Steris EPS Endoscope Processing System Year of manufacture: 2010 S/N: 3611710001 You are welcome to come by for a viewing. We are happy to organize a cost-effective shipping company for you! You will receive a proper invoice. For foreign customers, a net invoice can also be issued. A valid VAT identification number is required. Subject to prior sale. Visit our shop and take a look at our other offers. Gedpfx Asvypuxjnxoub The company names and trademarks given are the property of their owners and are used only to identify and describe the products. Deviations from technical data and errors in the description of the article can occur and are reserved.

Condition: good (used), Year of construction: 1984, - 6 rows of bottle cages - WITHOUT OZONE GENERATOR Gujdpferalr Hex Anxjb - Machine in working condition - Machine available immediately - Video available on request

Year of construction: 2017, condition: as good as new (ex-display), functionality: fully functional, Pharmatec Syntegon SVP 250 LF – Formulation System for Sterile and Aseptic Liquid Pharmaceuticals Gedpfxexdy Ers Anxsub For sale is a Pharmatec Syntegon SVP 250 LF formulation system for Small Volume Parenterals (SVP). The sale is on behalf of Syntegon (manufacturer, formerly Bosch Packaging/Pharmatec GmbH, Dresden). Technical Specifications: - Suitable for aqueous solutions, suspensions, and emulsions - Adaptable processing: terminal sterilization, sterile filtration, aseptic compounding - 2-vessel system for batch sizes of 25–250 L (expandable up to 4 vessels) - Dosing of additives via manway under LAF or pump system - Potent actives (OEB4/OEB5) processing via high-containment valve - CIP/SIP interfaces and pre-configured automation for integration with filling lines - GMP-compliant design, suitable for cleanroom classification Pricing: - Special price: please submit your offer - Original price in 2018: approx. €1,050,000 - Current list price for similar systems in 2025/2026: €1,415,000 Completion Status & Delivery Time: - Currently, the system is not fully operational, as the automation system including software needs to be reinstalled and certain components require replacement. - Completion will be handled directly by the manufacturer Syntegon, in consultation – expected lead time is approx. 3–4 months. - For comparison: lead time for a new system is approx. 12 months. Special Features: - System was originally built for exhibition purposes (demonstration unit) - Sale is directly on behalf of Syntegon, the original manufacturer - Ideal for pharmaceutical companies seeking a flexible and high-performance SVP system with a manageable delivery time.

Condition: used, functionality: limited functionality, machine/vehicle number: Biocap DNA, Used Captair Biocap DNA UV sterilization cabinet Manufacturer: Captair / Erlab Gedpexliivofx Anxeub Model: BiocapDNA Voltage: 230V (50Hz)

Condition: excellent (used), 2 BOLZ sterile tanks with agitator. Volume: 16,150 liters Max. excess pressure: 3.2 bar Max. allowable working temperature: 150 °C Double jacket: YES Double jacket volume: 1,000.0 liters Dimensions: Internal diameter: 2,490 mm External diameter: 2,580 mm Cylindrical height: 2,500 mm Total height: 5,000 mm Bottom wall thickness: 6 mm Cylinder wall thickness: 8 mm Complete technical drawings of the tanks are available. Gsdjwf Iycopfx Anxoub Used, but in good condition. Inspection possible. ONLY ONE LEFT AVAILABLE.

Condition: used, This listing is for a MMM Stericell Hot Air Sterilizer. Gusdpfx Ansxzg N Ejxsb Good working and cosmetic condition. The STERICELL® hot air sterilizer is intended for use in healthcare for the hot air / dry heat sterilization process of non-packaged and packaged medical devices, including invasive devices designed by their manufacturers for hot air / dry heat sterilization.

Condition: used, Combi filter (kieselgur- and sterilising filter) for beer filtration with hydraulic pressure, 100 x 100 cm filter plates and external risers. Guodpfxjvcqlwj Anxsb Additional title: combination filter Capacity: 120 hl/h Plate size: 100 cm edge length Length: 7000 mm Width: 1500 mm Height: 1500 mm Position: horizontal Base construction: mounted on steel frame, standing on feet Features: 31 kieselguhr layers (32 frames), 50 sterilisation layers, 4 pressure manometers (10bar), 6 lanterns, risers, kieselguhr discharge screw (Allweiler), gravity measurement, flow measurement, 3 x turbidity measurement (inlet, outlet Kieselgur filter, outlet 3 x turbidity measurement (inlet, outlet kieselgur filter, outlet sterilisation filter). Spare parts: 295 sealing rings for filter plates, 3 kieselguhr filter support plates

Condition: used, Unused and never installed Steriline sterile vial filling line made in 2021 with an output capacity of 24,000 pieces/hour. Sale includes ancillary equipment as described in equipment list below. The line was designed to operate in ORABS (Open Restricted Access Barrier System) containment system and currently capable of filling into vial sizes 6R (5ml) and 2R (2ml) with lyo / injection stoppers or alu caps. (OEM can provide change parts for alternative sized vials and cap formats.) Major equipment includes: - Rotary washing machine RC-V8 - Depyrogenating tunnel ST9-CCS - Tray Loader / TL2 - (4) LAF (Laminar Air Flow) Units - Vial filling machine VFM400 + oRABS - Swing way belt SWB1 + oRABS - Positive diverting system PDS + oRABS - Vial capping machine VCM400 + oRABS - Swing way belt SWB2 - Connection belt LBT - Swing way belt SWB3 - Rotating table RT Ancillary equipment includes: - (2) Fedegari FOF4/9 autoclaves - Veolia Waters Orion 6000 E WPU production unit - Steris Finn Aqua Pure steam generator Godsyhc Sqjpfx Anxeub - Steris Finn Aqua multiple effect water still - Atlas Copco ZT37VSD WP air compressor - WFI 15,000 litre storage tank - WPU 6000 litre storage tank - Main control cabinet - (2) Certuss steam generators - (2) Permak economiser and pump - Distribution system instruments (WPU, WFI, distribution system instruments, pipes, valves, pumps, etc.) - Clean room panels and ceilings - Daikin chiller Full design specifications available.