Used Baguette Moulder for sale (770)

Condition: like new (used), Globe Baguette machine in good working condition for more information please sent a request Hjlheumn Duoccqqjnk

Condition: new, Year of construction: 2026, functionality: fully functional, New machine Stainless steel model 24 months warranty Advantages: + TOP price-performance ratio + complete machine in stainless steel cladding + robust baguette long roller + with secured, high feed hopper + with safety switch on the feed hopper, stops the machine immediately (see video!) + Felt conveyor belts + simple, mechanical adjustment of the long roller properties + fast supply of spare parts within 1-2 working days SPECIAL accessories, optionally available at an extra charge: - Chassis: + 440,-- EUR net --- with 4 swivel castors, 2 with brakes - Guide for box loaves: + 490,-- EUR net Technical data: - Long roll width: max. 750 mm - Weight range: 50 - 1,200 gr - Hourly output: approx. 1,200 pieces (depending on dough) - Motor power: 0.37 kW - Connected loads: 400 V - 3Ph - 50Hz - 16A CEE plug - Dimensions: 97 x 68 x 155 cm (WxDxH) Hjlhehydbtsccqqenk - Height of the machine: approx. 70 cm (without frame) - Net weight: 250 kg

Condition: new, Year of construction: 2026, functionality: fully functional, New machine 24 months warranty Advantages: + TOP price-performance ratio + robust baguette long roller + 3 rolling cylinders made of polypropylene with chain drive + with secured infeed hopper, infeed chute is blinded + additional protection to prevent interference with the rollers + with safety switch on the feed hopper, stops the machine immediately (see video!) + Felt conveyor belts + simple, mechanical adjustment of the long roll properties + fast supply of spare parts within 1-2 working days SPECIAL accessories, optionally available at an extra charge: - mobile frame: + 390,-- EUR net --- painted frame, with 2 storage compartments under the machine --- with 4 swivel castors, 2 with brakes - Guide for loaves: + 490,-- EUR net Technical data: - Long roll width: max. 750 mm - Weight range: 50 - 1,200 gr - Hourly output: approx. 1,200 pieces (depending on dough) - Motor power: 0.55 kW - Connected loads: 400 V - 3Ph - 50Hz - 16A CEE plug - Dimensions: 115 x 69 x 167 cm (WxDxH) - Throw-in height: 144 cm - Height of the machine: approx. 75 cm (without frame) Hnslhccqohyda Ioqok - Net weight: 258 kg

Condition: excellent (used), 568 USED Grubelnik croissant maker. Machine for the production of: croissants, fingers, baguettes. Hnolsi Dbk Hehccqqek The device is perfect for the production of all kinds of croissants, sticks, baguettes in small and medium-sized bakeries and confectioneries.   The device is in our warehouse (36-068 Bachórz, Poland) Paid options available: transport. The price is a net price. Our languages: ENGLISH, GERMAN, FRENCH, RUSSIAN, UKRAINIAN.

Condition: excellent (used), Merand Baguette Machine in good working condition Hnjlhccekzh Ehjqqek

Condition: used, Moulder IDC000075 Heletwy T Rjhccqqjnk - manufacturer: Wadkin - model: GA 220 - 4 years ago made renovation

Condition: excellent (used), Year of construction: 2020, The Armor HV horizontal moulder includes all the features of the Armor Tradition model, but also is reinforced to keep higher daily rates. The included Tradition Pack will allow you to limit the degassing of your dough. Up to 1 800 pieces/h. Hslhowt Tnhsccqqenk Dough pieces from 50g to 2000g. Retactable belt. Belt dimensions 700mm W x 29mm L

Condition: like new (used), functionality: fully functional, W&P Kemper Superba Round and long moulding Perfect moulding results due to variable adjustments Hjlhsw Ulw Njccqqenk Electrical supply: 380V, 16A, 50hz Completely refurbished

Condition: excellent (used), Catalogue number 7207 TECHNICAL SPECIFICATIONS - Spindle diameter: 30 mm - Spindle working height: 120 mm - Interchangeable spindle - Spindle locking - Adjustable height (up/down) - Original cast iron fence - 4 spindle speeds + right/left rotation Holoyz Rfmjhccqqjnk - Table dimensions: 1060 x 770 mm - Cast iron table - Motor: 4 kW - Dimensions (L/W/H): 1060 x 1050 x 1070 mm - Weight: 510 kg ADVANTAGES – German-made – Used milling machine – Very good condition Net price: 5,500 PLN Net price: 1,300 EUR Net price calculated at an exchange rate of 4.2 PLN/EUR (In case of significant exchange rate fluctuations, the price may change)

Condition: excellent (used), Year of construction: 1999, H+K Four-Side Planer & Thicknessing Machine Quadroplan 180 Planing width: 20 - 180 mm Planing height: 5 - 120 mm Infeed table length: 2,100 mm Separate motor for each spindle Upper spindle motor: 5.0 kW Lower spindle motor: 4.0 kW Left spindle motor: 4.0 kW, automatic flow head Right spindle motor: 4.0 kW Max. spindle speed: 6,000 rpm Spindle diameter: 30 mm Max. feed speed: 8 m/min Cardan drive feed Feed motor power: 0.75 kW Total connected load: approx. 18.0 kW, 400 V, 50 Hz Extraction ports: 2 x 120 mm, 1 x 140 mm, 1 x 160 mm Dimensions (L x W x H): 3,370 x 1,330 x 1,500 mm Weight: approx. 1,280 kg Planing height adjustment, motorized with digital display Planing width adjustment, motorized with digital display Pneumatic spindle locking Unpowered outfeed roller Automatic centralized lubrication Automatic star-delta switching Helhccqjydmawjqsnk INCLUDES 4 reversible knife cutterheads INCLUDES operating manual & circuit diagram CE certified All bearings NEW All drive belts NEW Note on used machines: • Errors in technical details and prior sale excepted. • Prices listed are ex location – free loaded! • Machines have been cleaned and function tested. • All machines are sold as inspected, with no warranty or liability. Buyers are welcome to inspect machines at the location. • Special agreements are only valid in written form. (We only respond to inquiries containing your address & telephone number!)

Condition: used, Year of construction: 2010, Number of spindles 6 St. Working width 230 mm Working height 120 mm Length of the planing table 2500 mm Feed motor 3 kW Feed speed 5-30 m/min. Weinig Powermat 500, year of manufacture 2010, window version ----- technical details short summary: ----- - 6 spindles, 5 of which are PowerLock - 8,000 rpm - Large PowerCom control system - Spindles 2, 3, and 4 axially CNC-controlled - Spindles 2, 3, 4, and 5 radially CNC-controlled - Window package for glazing bead removal: Pneumatic indexing of right and top spindles for bead removal See attached PDF document for detailed description Options with additional costs: ----- - Existing planing and molding tools by Leitz (price on request!) - Maweg Saturn Duo single-slot wood sander, manufactured in 1985, Hjlhsyq S Dujccqqjnk in a production line and workpiece return conveyor. Price 4.000 Euro (Technical specifications according to the manufacturer, without guarantee!)

Condition: used, Number of boring spindles 5 St. Working width 230 mm Hslhcsy Dh Spocqqenk Working height 120 mm Length of the planing table 2.000 mm Planing and moulder Weinig Profimat 23 for four-sided planing and profiling of timber incl. a set of planing heads. Including dismantling and loading. Fixed loading date: 15.06.2026. Spindle 1: Bottom Spindle 2: Right Spindle 3: Left Spindle 4: Top Spindle 5: Bottom

Condition: used, Motor output 5,9 kW Hnolhcjyrhv Nocqqsk Spindle diameter 30 mm reus 3000 / 4500 / 6000 / 9000 U/min Panhans Type 259 swivel spindle milling machine or table milling machine for precise milling, profiling, and rebating of solid wood and wood-based materials. The machine has a swiveling milling spindle, enabling versatile machining at different angles. Ideal for carpentry, furniture making, and interior design. Includes Haffner feed device.

Condition: excellent (used), Year of construction: 2012, Weinig H1000 moulder Weinig Hydromat 1000 with 5 Spindles. (Year 2012) Hnelhey Aux Hsccqqok Separate electrical panel Separate remote control panel Automatic lubrication system for bedplates Memory system Full sound enclosure No 1. 7.5kw - Bottom 6000rpm + Outboard bearing + Straight jointer No 2. 7.5kw - Right 6000rpm + profile jointer No 3. 7.5kw - Left 6000rpm + profile jointer No 4 . 7.5kw - Top 6000rpm + Outboard bearing + Straight jointer No 5 . 7.5kw - Bottom 6000rpm + Outboard bearing + Straight jointer 50mm spindles Beam 0.55kW Full documentation included. Extraction manifold included. Possible to supply with Weinig mechanisation if needed (Year 2012)

Condition: good (used), Year of construction: 2000, Weinig A5 outfeed with automatic board stacker. -Boards are automatically transported laterally with the Weinig 820 right angle transfer. -Boards automatically form a layer and are then placed on the lifting table of the chain conveyor -The completed pack is transferred to the following chain conveyor -Maximum output: 40 cycles/minute for stacker (over 150m/min based on average length boards). -Space required: Length approx. 8000 mm, Width approx. 5000 mm approximately -Pack size max 6100mm x 1200mm x 1200mm(high) Helhsy Auv Eeccqqsnk

Condition: good (used), Year of construction: 2000, Weinig High Mech E6 infeed + A5 outfeed + stacker 1. Weinig pack infeed roller conveyor. 2. Weing pack tilt 3. Weinig flat chain cross feed conveyor with single board feeder. 4. Weinig reject sorting unit with roller tracks. 5. Weinig EM814 moulder infeed with flat chain feeder. Hnelhccqjy Auvxeqek 6. Weinig outfeed 3m belt accelerator conveyor. 7. Roller conveyor with cross feed chain kickers. 8. Weinig cross feed buffer belt conveyor. 9. Weinig flat chain stacker with scissors lift roller conveyor. 10. Weinig pack outfeed roller conveyors. Possible to offer with additional Weinig bundling system if needed.

Condition: excellent (used), Year of construction: 2012, Weinig E3 infeed and A3 outfeed E3 Infeed Scissors lift before crossfeed. Crossfeed table to infeed accelerator. Moulder infeed accelerator. A3 Outfeed Holjy Auvrehccqqonk Drop leaf. Crossfeed belt conveyor. Scissors lift with pack chains. pack outfeed chains.

Condition: excellent (used), Year of construction: 2015, Weinig Powermat 2400 moulder with 7 Spindles. (Year 2015) 50mm spindles 6,000 RPM (Not Powerlock) Bottom 15 kW + outboard bearing Right 11 kW + Straight jointer Left 11 kW + Straight jointer Top 15 kW + Straight jointer + outboard bearing Bottom 18.5 kW + Profile jointer Top 18.5 kW + Straight + Profile jointer Bottom 18.5 kW Straight jointer + outboard bearing Hnelhccsy Auvfjqqek 11kW feed motor Automatic lubrication system. Electric digital display memory system. Possible to supply with Weinig moulder infeed and outfeed

Condition: excellent (used), Year of construction: 2003, Weinig Hydromat 23C with 6 Spindles. Separate electrical panel. Automatic lubrication system for bedplates Maximum dimensions 140mm x 230mm No 1.  11kw - Bottom 6000rpm + Outboard bearing - straight jointer prepared No 2. 11kw - Right 6000rpm - straight and profile jointer prepared No 3. 11kw - Left 6000rpm - straight and profile jointer prepared No 4 . 15kw - Top 6000rpm + Outboard bearing - jointer prepared Hnslhccoy Auu Uoqqek No 5 . 11kw - Top 6000rpm + Outboard bearing - straight jointer No 6 . 18.5kw - Bottom 6000rpm + Outboard bearing - straight jointer 7.5 kw feed. 6-60m/min (Possible to increase speed as needed). 50mm spindles Beam 0.55kW Full documentation included. Possible to supply with hydro tooling if needed. Possible to supply with infeed and outfeed if needed.

Condition: excellent (used), Year of construction: 2012, Weinig H1000 moulder with E3 infeed and A3 outfeed mechanisation Weinig Hydromat 1000 with 5 Spindles. (Year 2012) Separate electrical panel Separate remote control panel Automatic lubrication system for bedplates Memory system Full sound enclosure Weinig E3 moulder infeed +pack scissors lift (3000kg). Weinig A3 drop leaf outfeed + pack scissors lift (3000kg) + pack outfeed chain conveyor. WEINIG HYDROMAT 1000 Helhccsy Auunjqqonk 230X160mm maximum dimension No 1. 7.5kw - Bottom 6000rpm + Outboard bearing + Straight jointer No 2. 7.5kw - Right 6000rpm + profile jointer No 3. 7.5kw - Left 6000rpm + profile jointer No 4 . 7.5kw - Top 6000rpm + Outboard bearing + Straight jointer No 5 . 7.5kw - Bottom 6000rpm + Outboard bearing + Straight jointer 50mm spindles Beam 0.55kW Full documentation included. Extraction manifold included. POSSIBLE TO PURCHASE MOULDER OR MECHANISATION SEPARATELY AS NEEDED

Condition: excellent (used), Compact High Speed Planing Line Mechanisation with Stacker 1. Weinig EM814 moulder infeed with flat chain feeder 2. Weinig 820 high speed right angle moulder outfeed with cross feed sweepers 3. Weinig 811 board stacker with scissors lift (chain feed discharge options) -Boards are automatically transported laterally with the Weinig 820 right angle transfer. -Boards automatically form a layer and are then placed on the lifting table of the chain conveyor -The completed pack is transferred to the following chain conveyor -Maximum output: 40 cycles/minute for stacker (over 150m/min based on average length boards). -Space required: Length approx. 8000 mm, Width approx. 5000 mm approximately -Pack size max 6100mm x 1200mm x 1200mm(high) Hslhcjy Aut Decqqsnk 3. Weinig cross chains after scissors lift to move full packs away from the stacker when full. Possible to supply with Weinig Hydromat moulders 100m/min as needed.

Condition: good (used), Weinig Hydromat H23 50mm spindles 6,000 RPM Bottom 15kW jointer ready Hslhcey Autqecqqonk Right 11kW jointer ready Left 11kW jointer ready Right 11kW jointer ready Left 11kW jointer ready Top 15kw jointer ready Bottom 11 kw jointer ready (straight jointer) + outboard bearing Top 11kw jointer ready (straight jointer) + outboard bearing Bottom 15 kw jointer ready Possible to add additional straight / profile jointers as needed !!! 15kW feed motor. Automatic lubrication system. Possible to supply with moulder infeed and outfeed as needed. Possible to offer tooling if needed.

Condition: excellent (used), High speed moulder infeed comprising a freestanding flat magazine in front of a high speed moulder. The infeed magazine is driven by hydraulic motors powered by an 5.5kW hydraulic unit (max 140m/min). Hnjlhccqswgbxzjqok A buffer of feedstock is alligned laying flat side by side on the chain cross feeder. The chain feeder transports parts across to the fence. The part next to the fence is detected by a light beam and the the first roller is raised to allow entry and the transport roller then pushes the workpiece under the feed rollers of the planer. The first feed roller of the planer needs to be freewheeling roller to allow operation of the EM814.

Condition: excellent (used), Year of construction: 1995, Tilting spindle moulder with long work tables and feed unit Motor power: 5.5 kW, 400 V, 50 Hz Spindle speeds: 3,500/4,500/6,000/8,000/10,000 rpm with digital readout Useful spindle height: 180 mm Vertical spindle stroke: 155 mm Interchangeable spindle MK 5, diameter 30 mm Spindle tilting range: +45° / -10° Spindle height adjustment: electric with digital readout Spindle tilt adjustment: electric with digital readout Fence adjustment: manual with fine adjustment Spindle reversal (right/left rotation) CE compliant Extraction connection: 2 x 120 mm Working height: 860 mm Including round arch milling fence Including interchangeable spindle MK 5, diameter 25 mm Including interchangeable spindle MK 5, diameter 50 mm Dimensions (L x W x H) approx.: 2650 x 1250 x 1700 mm Weight approx.: 1000 kg HOLZHER feed unit 3 rollers 8 speeds Note for used machines: • Errors in technical details and prior sale reserved. • Stated prices are ex location—loaded free onto transport! • The machines have been cleaned and function-tested. • All machines are sold as seen, without any warranty claims. Buyers are welcome to inspect the machines at our site. • Special agreements are only valid in written form. Helhccqsyynptoqsnk (Please respond to enquiries only with your address and telephone number!)

Condition: excellent (used), Year of construction: 1992, Tilting spindle moulder with sliding table Manufacturer: Martin Model: T25 Year of manufacture: 1992 Hneley Ahpljhccqqek Tilting range: -5° to +45° Height and angle adjustment: Electric Spindle diameter: 30 mm Power: 5/6 kW Spindle speeds: 3,000 / 4,500 / 6,000 / 9,000 rpm Reversible spindle direction: Yes Motor brake: Yes Right-side table extension with pull-out stop Left-side table extension with sliding table Sliding table for slotting operations Slotting guard Haffner feed unit with 3 rollers – stepless adjustable Weight: Approx. 1,500 kg Location: Ex stock 54634 Bitburg - immediately available -