Used Ball Header for sale (3,260)

Condition: used, Year of construction: 2017, Working range X-axis: 550 mm Y-axis: 450 mm (tool change position 725 mm) Z-axis: 375 mm Workpiece carrier Double swivel carrier with counterbearing and crown gear, swivel time 0/180°: approx. 3.0 s A- and U-axis for fixture plate: max. ø475 × 830 mm Drive system: torque motor Load capacity: 2 × 360 kg Speed range A- and U-axis: 1–50 rpm C- and W-axis (optional): 2 or 4 satellites Work spindle Tool interface: HSK-A63 Speed range: 1–10,000 rpm (optional 1–17,500 rpm) Run-up time to max. speed: < 0.4 s (< 1.0 s with optional spindle) Spindle bearings: ø80 mm Power: 32 kW (40% duty cycle) Torque: 72 Nm (40% duty cycle) Feed drive Hjdez R Szrjpfx Airow Drive system: ball screw Rapid traverse X/Y/Z: 75 m/min Axis acceleration X/Y/Z: 10 / 10 / 15 m/s² Max. feed thrust X/Y/Z: 8,000 N Accuracy Position measuring system: direct, absolute Positioning tolerance X/Y/Z: Tp = 0.008 mm Tool magazine Tool change system: pick-up Capacity: 40 pockets (optional 64 or 80) Max. tool diameter: 70 mm / 160 mm (with free adjacent pockets) Max. tool length: 275 mm Max. tool weight: 7.5 kg Chip-to-chip time: approx. 2.5 s Weight and dimensions Total weight: approx. 9,500 kg Transport dimensions (W × H × L): 2.75 × 2.85 × 3.65 m Machine installed (W × H × L): 3.85 × 3.70 × 6.30 m Connected load Operating voltage: 3 × 400 V, 50 Hz, TN-S/TN-C Total connected load: approx. 64 kVA Mean air consumption: 0.5 Nm³/min (6 bar) CNC control Siemens SINUMERIK 840D

Condition: new, ALTENDORF Model F 2 Hsdpfxol D Rp Ej Airow Offer type: New machine, SALE ONLY IN AUSTRIA! Immediately available new machine at a special price with full manufacturer's warranty. The 3.3 m long F 2 is not only cost-effective and space-saving. It is also equipped with everything you need to process perfect edges from the start: diamond-tipped jointing cutters ensure workpieces are excellently prepared for edge banding. The equipment includes a jointing unit (up to 2 mm cutting depth), top-mounted quick-heating glue pot, cross-cut saw, and combination milling cutter. Optionally, the F 2 can also be fitted with a surface scraper. Max. edge thickness: 3 mm Max. workpiece thickness: 50 mm Ready for operation in 3.5 min Feed rate approx. 10 m/min Equipment: F2 next edge banding machine With PLC control (incl. touchscreen) Hot-melt adhesive application to the workpiece for edging material up to 3 mm Jointing cutter (incl. diamond tool) up to 2 mm cutting depth Maintenance-free glue pot with quick-change option incl. glue discharge device HF cross-cut saw station (approx. 12,000 rpm) HF milling station (approx. 12,000 rpm) with separate pneumatic milling adjustment and interchangeable cutter head (combination version) Robust chain drive Ball-bearing double pressure roller Viewing window from the rear of the machine Extendable workpiece support Including special equipment: F2/12 surface scraper (incl. pneumatic lift) F2/30 pneumatic 3-point adjustment (for radius, chamfer, or flush trimming) F2/27 nesting for milling stations

Condition: excellent (used), Planing width 520 mm Min./Max. working height 3 – 240 mm Motor power 5.5 kW, 400 V, 50 Hz Speed of planing shaft 4500 rpm Diameter of planing shaft 120 mm Planing knives 4 pcs Dimensions of thickness table 520 x 850 mm Feed rate 6.5 / 10 / 13 / 17 m/min Dust extraction diameter 150 mm Electric height adjustment Handwheel for fine adjustment of thickness table height Spiral-toothed steel feed roller Segmented pressure bar Hjdpfx Aey Egmueirsw 2 steel extraction rollers Table roller Low voltage release Emergency stop switch Knife setting gauge Test report for conformity with Section 4 of the AM-VO NEW V-belts NEW BALL BEARINGS NEW PLANING KNIVES Dimensions approx. L x W x H = 1120 x 990 x 1000 mm Weight approx. 600 kg Note on used machines: • Subject to errors in technical specifications and prior sale. • Prices quoted are ex-works, pick-up only – free loading! • The machine has been cleaned and function-tested. • All machines are sold as seen, without any warranty claims. The buyer is free to inspect the machines at our location. • Special agreements are only possible in written form. (We will only answer inquiries if you provide your address and telephone number!)

Condition: new, Year of construction: 2023, Stable cast iron construction Milling spindle can be swiveled backwards from 0° to -45° Right-left rotation of the milling spindle Generously dimensioned milling unit made of cast iron, attached directly to the table Solid and precise cast iron table Standard curved milling protection hood Aluminum sliding carriage ball contact system Torsion-resistant, highly precise, smooth-running and problem-free in daily use 10-year SCM guarantee on wear of the guideways Milling spindle mounted high up with precision ball bearings, resulting in the lowest possible bearing load and the longest possible service life Exact router fence with quick adjustment and fine adjustment with a scale on the stop jaw Integrated suction connection Large milling table opening allows the use of larger tools Weight approx. 290 kg Extraction connection diameter 2 x 120 mm Working table L x W = 1000 x 435 mm Table height 900 mm Sliding carriage length 1000 mm Sliding carriage width 270 mm Drive motor power 5.0 kW, 400 V, 50 Hz Milling spindle inclination 0 to -45 ° Spindle usable length 100 mm Overhang max. above table 130 mm Spindle speeds 3500/7000/10000 rpm Hsdpfx Asiknp Roirow Mandrel diameter 30 mm Tool diameter max. lowerable 180 mm

Condition: used, mileage: 78,163 km, power: 130 kW (176.75 HP), first registration: 08/2017, fuel type: diesel, overall weight: 7,490 kg, axle configuration: 2 axles, color: white, gearing type: mechanical, emission class: euro6, total width: 2,530 mm, total height: 2,660 mm, loading space length: 4,050 mm, Year of construction: 2017, Equipment: ABS, air conditioning, electronic stability program (ESP), soot filter, Errors and prior sale reserved! Internal number: 1263. 0190394 ---- EQUIPMENT Hjdoy Iug Iopfx Airew Trailer coupling: ball head, 3.5 t (low), trailer socket 12V / 13-pin, standard cockpit, driver assistance system: lane keeping assist, electric window lifters, alternator 100 A, mechanical transmission, 6-speed gearbox - Type: G 70-6, heated air dryer, PTO MB 56-1C, radio pre-installation (12V), end crossmember for trailer coupling (center axle trailer), fleet management system interface, seats in cab: adjustable driver's seat, seats in cab: center seat with seat belt, voltage converter 24V / 12V 10 A, rear fender splash guard, steel rims 6.75x17.5, 24V cab socket, side underrun protection, toll system pre-equipment Additional features: EURO 6 emission standard, axle configuration: 4x2, front axle load 4.1 t, start-up/front-view mirror, exhaust tailpipe to vehicle center, exterior mirror electrically adjustable, left, battery 100 Ah, rear axle differential lock, steel air reservoir, single-step entry, cab: S ClassicSpace, cab version: ClassicSpace, suspension: leaf / leaf, rear leaf springs 4.6 t, front leaf springs 3.4 t, AdBlue tank: 25 L, manual lifting roof (steel), rear axle crown wheel 325, hydraulic pump (Meiller pump - 5 pistons - 254 / 1), info display 10.4 cm with additional indicator, body / superstructure: tipper, fuel tank: 120 L, engine 5.1 L - 130 kW diesel (OM 934), engine compartment encapsulation, wheelbase 3020 mm, rear window, disc brakes front and rear axle, seat cover / upholstery: fabric, seats in cab: fixed passenger single seat, rear axle stabilizer, tachograph / EC control device, automatic daytime running lights, fixed rear underrun protection, immobilizer, permitted gross weight 7.49 t ---- The vehicle is unrestored! Nationwide delivery available at extra cost. Errors and prior sale reserved. We are happy to accept your vehicle in part exchange. Financing / leasing also possible without down payment! Do you have any questions? We are happy to advise you!

Condition: used, Year of construction: 2009, x-travel 835 mm y-travel 510 mm z-travel 510 mm CNC-control iTNC530 HEIDENHAIN table-size 1000 x 560 mm max. table load 800 kg Hedpfx Asy Ty A Soirow spindle taper SK 40 spindle turning speed range 20 - 14.000 U/min feed stepless 1 - 20.000 mm/min rapid traverse 20 m/min drive capacity - spindle motor 13 / 9 kW tool change unit 32 Pos coolant IKZ 25 bar voltage 400 V total power requirement 30 kVA weight of the machine ca. 4,5 t dimensions of the machine ca. 2,25 x 3,20 x 2,30 m chip conveyor 3,50 x 0,85 x 1,55 m coolant equipment 1,40 x 1,60 x 1,80 m spindle oil cooler 0,40 x 0,50 x 1,00 m - Serial-No.: 15415041384 - Machine ON: 72,882 h - Program Run: 25.267 h - control: HEIDENHAIN iTNC 530 - Linear scales in all 3 axis - electr. handwheel - Tool changer 30 pos. with double gripper - Chip conveyor - TSC with belt filter system - Coolant unit - new ball screw incl. bearings (X-Axis)

Condition: ready for operation (used), Year of construction: 2021, travel distance X-axis: 500 mm, travel distance Y-axis: 700 mm, travel distance Z-axis: 500 mm, number of axes: 3, This 3-axis Hexagon Global S 05.07.05 was manufactured in 2021, featuring a measuring range of X 500mm, Y 700mm, Z 500mm. It includes an indexable swivel head, HH-AS6-T5, and an HP-S-X1S touch probe with a standard styli set. Ideal for precise measurements in extended temperature ranges (16-26 °C). If you are looking to get high-quality measuring capabilities consider the Hexagon Global S 05.07.05 machine we have for sale. Contact us for more information. • Software: PC-DMIS CAD++ • Workstation: PC Dell Precision (i7, 16GB RAM, Quadro P2200) • Controller: DC241 EEC, 230 V • Machine with standard dynamics • Extended operating temperature range: 16–26 °C • Next Jogbox • Sensor for part temperature compensation Additional equipment • Calibration ball, ø 25 mm, ceramic, with stand • Indexable swivel head, HH-AS6-T5 • HP-S-X1S touch probe • Stylus holder, HP-S-X1S • Standard stylus set, HP-S-X1S • Automatic stylus magazine HR-X-400 • Multi-port stylus magazine HR-X1-3P (3 ports) Hodo Aa Rk Ijpfx Airsw

Condition: ready for operation (used), Year of construction: 2019, overall weight: 1,259 kg, This SCM SI 5 panel saw was manufactured in 2019. It features a maximum cutting height of 200 mm at 90° and a sliding table version of 3800 mm, allowing for format cuts up to 3800 x 3200 mm. The machine is equipped with an "EASY TOUCH 7" electronic control unit, enabling up to 999 storable programs. If you are looking to get high-quality cutting capabilities, consider the SCM SI 5 panel saw we have for sale. Contact us for further details. Hsdpfxe Adti Ue Airew - Controlled Axes: Up to 3 axes (Main Saw Height, Main Saw Tilt, Programmed Rip Fence / Scoring Unit positioning) - Voltage: 400 V - Phases: 3 ~ - Current: 22 A - Frequency: 50 Hz - Short-circuit current (Icc): 12 kA - Main Motor Power: 9 kW (12 HP) at 50Hz (with automatic star-delta starter) - Scoring Motor Power: 0.9 kW (S6-40%) - Main Saw Blade Diameter: Up to 550 mm (without scoring blade); up to 450 mm (with scoring blade) - Max. Cutting Height at 90°: 200 mm - Max. Cutting Height at 45°: 130 mm - Saw Blade Swivel: 46° - Saw Blade Speeds: 2500 / 3500 / 5000 RPM - Scoring Saw Speed: 8500 RPM - Cutting Width at Rip Fence: 1500 mm - Sliding Table Version: 3800 mm (Format cuts up to 3800 x 3200 mm) - Exhaust Socket Diameters: 120 mm (on frame), 100 mm (on saw blade guard) - Fence System: Programmed rip fence with THK guide and recirculating ball screw (25 m/min speed), fully swingable under the table - Blade Clamping: "Pro-Lock" system for quick clamping of main saw blade with keyless riving knife adjustment

Condition: used, Year of construction: 1988, Deckel FP4MA 2204 – CNC Machining Center - General overhaul in 2022 - Heidenain TNC320 CNC control - CNC or manual control possible - Movable vertical milling head with retractable spindle - Counter bearing for long milling arbors - Hydraulic tool clamping - Automatic gearbox - Automatic clamping in the X, Y, and Z axes - Automatic central lubrication - Coolant system - Direct path measurement - Collision protection coupling in the Y and Z axes - Year of manufacture: 1988 - Includes tool holders, drilling/milling tools, and tool cart Hjdpfx Aj Adr R Dsirew Specifications Working area: - X-axis (longitudinal): 485 mm - Y-axis (transverse): 385 mm - Z-axis (vertical): 380 mm - Quill stroke (vertical): 80 mm - Vertical milling head manually adjustable on spindle head: 150 mm Main drive: - Pole-changing three-phase brake motor: Gearbox with right/left rotation - Power: 3.7 / 4.4 kW - Spindle speed: 63 - 3150 rpm (18 steps) - Step jump: 1.25 - Tool holder: SK40 (M16) - Tool clamping: Disc spring pack - Tool release: hydraulic Feed drive: - X-axis: 1 DC motor - Y & Z axis: 1 DC motor - Ball screws: all axes - Feed rate: 2 - 3000 mm/min (programmable) - Rapid traverse X/Y/Z axis: 3000 mm/min Table carriage: - Number of T-slots: 4 - T-slot width: 14H7 mm - T-slot spacing: 63 mm - Permissible load: approx. 600 kg Installation: - Space requirement (with safety area): approx. 2300 x 2500 mm - Machine weight including vertical milling head and rotary table: approx. 1830 kg - Operating voltage: 400 V - Total connection value: 12.5 kVA - Floor load: 3000 kg/m²

Condition: good (used), Ram, rams for an eccentric press, single column press, punching machine, single column eccentric press, eccentric press - single column, press -Spare part: comes from a Weingarten eccentric press -Stroke adjustment: 10-80mm -Plunger area: 320 x 65 mm Hedpfsd Nzg Rex Airjw -Plunger mount: O 40 mm -Plunger adjustment thread: M64 x 6 mm -Plunger adjustment ball head: approx. 92 mm -Dimensions: 875/320/H190 mm -Weight: 164 kg -Pressure unknown

Condition: used, BANDELIN SONOREX Industrial ultrasonic cleaning bath / ultrasonic cleaning system BANDELIN SONOREX S 3025 KH Ultrasonic bath with HF generator G 2025 – 2000 W – 25 kHz For sale is a used industrial ultrasonic cleaning system from the manufacturer BANDELIN electronic. The system consists of a SONOREX ultrasonic bath Type S 3025 KH and a separate HF generator Type G 2025 with external timer control. The ultrasonic cleaning system is suitable for cleaning workpieces, machine components, and parts in workshops, manufacturing facilities, and industrial plants. Technical data: Manufacturer: BANDELIN electronic Model series: SONOREX Type of ultrasonic bath: S 3025 KH Type of HF generator: G 2025 Equipment type: Industrial ultrasonic cleaning system Country of manufacture: Germany Ultrasonic bath S 3025 KH: Mains voltage: 220–240 V AC Mains frequency: 50–60 Hz HF frequency: 25 kHz HF generator G 2025: HF power: 2000 W HF frequency: 25 kHz Mains voltage: 220–240 V AC Hjdpfxo Ad E Uce Airew Mains frequency: 50–60 Hz Current consumption: 8.7 A Equipment: SONOREX ultrasonic bath in stainless steel design Separate BANDELIN SONOREX HF generator G 2025 External timer with rotary control Control panel with temperature control and indicator lights Analog display on the HF generator Status indicators on the generator Two fans on the front of the generator Cleaning basket / grid insert Cover with handles Drain connection with ball valve Connection cables as shown in the pictures Application areas: Industrial ultrasonic cleaning Cleaning of machine components Workpiece cleaning Workshops Manufacturing facilities Maintenance and repair General commercial cleaning applications Scope of delivery: 1 × BANDELIN SONOREX S 3025 KH ultrasonic bath 1 × BANDELIN SONOREX G 2025 HF generator 1 × External timer 1 × Cleaning basket / grid insert 1 × Cover Connection cables and accessories as shown in the pictures Condition: Used Optical condition as shown in the pictures Signs of use and cleaning are present Nameplates are present Functional test not documented Dimensions and weight: External dimensions of the ultrasonic bath: to be determined External dimensions of the HF generator: to be determined Total weight: to be determined The workbench shown in the photos and any other items not expressly mentioned are not included in the sale. Shipping or freight transport is possible. Subject to changes, errors and prior sale. We are happy to answer any further questions by telephone.

Condition: used, Year of construction: 2004, Used Machine Year of Manufacture: 2004 Features and Technical Specifications: Base Machine: - Single-arm traveling column - Welded machine frame with ground prismatic guides - Rack-and-pinion drive in the X direction, ball screws in the Y and Z directions for precise positioning Machining dimensions: - Max. workpiece size for milling, minus cutter radius (tool diameter 25 mm): X = 3,015 mm, Y = 1,282 mm - Maximum travel ranges: X = 3,268 mm, Y = 1,483 mm, Z = 325 mm - Maximum programmable speed X = 78 m/min. Y = 78 m/min. Z = 26 m/min. Workpiece support with 4 brackets, pneumatically clamped; each bracket has 1 stop pin at the rear and 2 vacuum cups per bracket Display and definition in the program: - 2 side stops (right and left) - 2 large push buttons for clamping and releasing workpieces - 2 mounts for unused suction cups - 2 tape measure displays for positioning the brackets in the X-axis, relative to the left and right stops. - Rear stop or, alternatively, stops in the X and Y directions mounted at the front instead of the rear Drilling unit 7964, 18 spindles: - Drive power 2.2 kW - 14 vertical spindles, individually controllable, arranged in a T-shape, 10 in the X-direction and 4 in the Y-direction - 32 mm pitch - Max. drill bit diameter: 35 mm - Total drill bit length: 70 mm from the mounting end (depending on panel thickness) - Spindle extension stroke: 70 mm - Rotation direction: Alternating clockwise/counterclockwise, n(max.) 1,000 – 4,390 rpm, continuously adjustable - Mounting: M 10 thread – interference fit, diameter 11 mm - 4 horizontal spindles - 1 dual drilling spindle in the X direction - 1 dual drilling spindle in the Y direction - Mounting: M 10 thread – interference fit, diameter 11 mm - Total drilling length: max. 70 mm from the mounting end - Space available for: Optional dual drilling spindle in the X-direction or vertical adapter with double feed force Saw unit 7945: - Power: 1.5 kW - n(max.) = 1,000 – 4,850 rpm, continuously variable - 90° pneumatically swiveling for sawing/grooving in the X and Y directions - Tool holder: A diameter = 150 mm, I diameter = 30 mm, B = max. 8.0 mm Milling unit 7930: - Power: 6.0 kW (S6) - n(max.) 1,000 – 18,000 rpm, continuously adjustable - Liquid cooling - With HSK 63 F tool holder, with right-hand threaded nut (for right-hand tools) - With collet chuck with HSK shank - Ceramic ball bearings (hybrid bearings) - With pneumatically height-adjustable exhaust hood - Tool weight: max. 6 kg (including holder) - Tools: Milling and grinding tools, max. diameter 160 mm - 2 machining areas, each with 3 pneumatically controlled stop pins (standard at the rear, optional at the front) - Vacuum pump 40 m³/h, water-cooled with milling spindle cooling - Safety enclosure in accordance with CE standards - Selective safety foot mats (3-section layout) in the work area - Manual lubrication for all linear guides in the X, Y, and Z directions, for all milling spindle guides, for all console guides, and for all unit guides Control system: - PC control system with 17-inch monitor - Windows 2000 operating system Hjde Af I Upepfx Airsw - RJ45 network connection, 10/100 Base-T Fast Ethernet; processor clock speed: 2.4 GHz - US keyboard and Microsoft InteliEye mouse (optical) - Integrated 56K remote maintenance modem for data transfer - 3½-inch floppy disk drive, CD-ROM drive (CD burner) - TwinC...

Condition: new, neu ca. 12 - 14 Wochen ab Auf Türkei 82700 € 1563.03 € 3100 mm 16 mm 10 mm 350 mm 10 1/min 2 ° 14 61 to 1000 mm 200 mm/s 37 kW 410 l 2 Stk. 818 mm 550 mm 3580 mm 4550 mm 2250 mm 3825 mm 2250 mm 15000 kg Swing cut construction NC-preselection system D-touch 7 with touch screen for back gauge, cutting length, quantity, USB port Motorized back gauge 1000 mm on ball screws, folding upwards Clear control panel mounted on moveablearm Hydraulic hold down pistons are arrangedclose to the cutting edge Foot switch Central, manual blade gap adjustment Cutting line illumination Broad table with balls Piece counter Single and continous stoke Fold up finger guard 1.000 mm 1 squaring arm 1. 500 mm with scale,T-slot and tilting cam 2 supporting arms 1.000 mm with T-slot Simple replacement and grinding of theblades Variable adjustable cuttinglength for economic processing Lower blade fourfold turnable Upper blade double turnable Oilfilling Light barrier on the back of the machine Qualified customer support User manual in GERMAN and ENGLISH according to CE rules (sample photo) WE HAVE MORE THAN 850 REFERENCES! Hodjwir Dyspfx Airsw

Condition: new, neu ca. 12 Wochen ab Auftrags Türkei 56100 € 1060.29 € 4100 mm 6 mm 4 mm Hsdpfxjwiqw So Airow 50 mm 12 1/min 1.5 ° 20 17 to 1000 mm 200 mm/s 15 kW 200 l 3 Stk. 865 mm 580 mm 4510 mm 5230 mm 2300 mm 3600 mm 2150 mm 11460 kg Swing cut construction NC-preselection system D-touch 7 with touch screen for back gauge, cutting length, quantity, USB port Motorized back gauge 1000 mm on ball screws, folding upwards Clear control panel mounted on moveablearm Hydraulic hold down pistons are arrangedclose to the cutting edge Foot switch Central, manual blade gap adjustment Cutting line illumination Broad table with balls Piece counter Single and continous stoke Fold up finger guard 1.000 mm 1 squaring arm 1. 500 mm with scale,T-slot and tilting cam 2 supporting arms 1.000 mm with T-slot Simple replacement and grinding of theblades Variable adjustable cuttinglength for economic processing Lower blade fourfold turnable Upper blade double turnable Oilfilling Light barrier on the back of the machine Qualified customer support User manual in GERMAN and ENGLISH according to CE rules (sample photo) WE HAVE MORE THAN 850 REFERENCES!

Condition: new, neu ca. 12 - 14 Wochen ab Auf Türkei 129800 € 2453.22 € 6080 mm 6 mm 4 mm 350 mm 10 1/min 0.5 - 2 ° 29 20 to 1000 mm 200 mm/s 22 kW 200 l 5 Stk. 900 mm 630 mm 6370 mm 7300 mm 2150 mm 3400 mm 2750 mm 25500 kg linear guided CNC touch screen D-touch 7back gauge,cutting angle,cutting gap,cutting length, quantity USB port CNC controlled cutting gap adjustment by the table (patented) oil cooler manual central lubrication cutting line illumination foldable ball screws for back gauge balls in table foldable finger protection, 1.000 mm side lay with T-slot, tilting cam and scale 5 support arms wit T-slots oilfilling light barrier on the back of the machine Hodpfjwiqygsx Airew user manual in GERMAN and ENGLISH PRICE FCA TURKEY (sample photo)

Condition: excellent (used), Year of construction: 2002, max. wheel diameter 250 mm gear width 600 mm max. module 8 min. module 0,5 spindle turning speed - stepless 225 - 1800 U/min control Siemens 840 D milling head -swivable +/- 45 ° table diameter 170 mm table hole 100 mm clamping length max. 1310 mm total power requirement 55 kW weight of the machine ca. 11,2 t dimensions of the machine ca. 3,2 x 2,6 x 2,8 m Hodpfx As Afzy Roirow

Condition: new, pressure 220 t chamfer lenght 4100 mm distance between columns 3600 mm work stroke 310 mm dayligth 525 mm column arm 510 mm ram stroke speed 150 mm/sec work speed 9.0 mm/sec return speed 140 mm/sec table height 900 mm Hodpfxj Afzvlj Airsw oil volume 290 ltr. voltage 400 Volt weight 16300 kg range L-W-H 4550 x 2450 x 2950 mm ----- CNC "C" SERIES electro-hydraulic press brake featuring: * Increased daylight opening (installation height) * Extended cylinder stroke * Increased throat depth * Long-type "full machine cover" ----- Equipment: - DELEM CNC control, model DA-66T, with touchscreen/graphics * 2D graphical touchscreen programming * 3D visualization for simulation and production * 17" high-resolution TFT color screen * Bending sequence calculation * Product programming with true-to-scale visualization * USB interface * Swiveling touchscreen control unit (positioned at the front left) - CNC-controlled axes: Y1, Y2, X, R, Z1, and Z2, plus CNC-controlled . crowning (anti-deflection) - CNC-controlled motorized backgauge * Travel range: X-axis = 750 mm // R-axis = 250 mm * Travel speed: X-axis = 500-600 mm/s // R-axis = 200 mm/s * Equipped with ball screws * CNC-controlled motorized backgauge fingers (Z1 + Z2) - Sectionalized "gooseneck" (swan-neck) upper tool: ROLLERI 135.85.R08, "System A" * Includes quick-change clamping system * Includes integrated crowning system within the tool holder - Sectionalized 4-V universal die (60x60 mm) - Rear safety system: Light curtain - BOSCH/HOERBIGER hydraulic components - SIEMENS electrical components - FIESSLER AKAS laser safety system at the front of the machine (including FMSC) - 2x front support arms SLIDING system (HIWIN plain bearings) - 1x freely positionable dual foot control - CE mark / Declaration of Conformity - Operating manual, including electrical and hydraulic schematics * Image shows a machine of similar design

Condition: new, cutting width max. 310 mm Cutting height max. 125 mm Saw blade diameter 500 mm Motor output 5,5 kW Speed 2.800 U/min. Required air-pressure 6-8 bar Working height 900 +/- 20 mm Dimensions (L/W/H) 10645x1000x1300 mm SALVAMAC COMBO 500 – The semi-automatic miter saw with SALVASTOP 100 - electronic length stop/slider ----- - Pos. 1: Legend 500 under table miter saw ----- - Maximum cutting area: 220x125/ 260x100/285x80/310x50 mm. When cutting boards that are on top of each other, h max. 100 mm. The structure is made entirely of thick-walled and reinforced full-surface painted steel. Solid floor mounting system with flanged steel feet for the mounting hole. Bimanual safety cut control in ergonomic position. Motor power of the saw motor 5.5 kW. Adjustable cutting speed via a pneumatic controller. Maximum system for weight balancing and longevity. Shock absorbing system. Independent pneumatic adjustment options to adapt to different types of processing. Durable and easily replaceable saw blade adjustment bar. HM circular saw blade, diameter 500 mm, Z=108. Pneumatic upper workpiece clamping press with electro-pneumatic control. Presser movement system using new ball bearings with double dust protection and automatic lubrication system. CE compliant electrical system. The CE models must come standard with at least 1 meter long support plates at the inlet and outlet. Technical specifications: ----- Saw cross-section max. mm. 220x125, 260x100, 285x80, 310x50 Saw blade motor power: 5.5 kW Saw blade diameter: 500 mm Saw blade type: HM Z=108 Saw blade rotation speed: 2800 rpm Air consumption per cycle: 7 Nl Intake manifold: 1 - 120 mm / 1 - 100 mm Air pressure: 6 - 8 bar Voltage: V 400/50Hz 3-phase Worktop height: 900 mm +- 20 mm Colour: Ral 7035 - Ral 1007 Pos. 2: Salvastop 100 electronic length stop ----- - - Working method: 2 modes 1 x stop (length stop moves to the specified length) and 1 x slide (several lengths are processed one after the other at the push of a button) - with servo drive - Ram speed: up to 60 m/min - slider length 600 mm - with a 7'' touch display - maximum weight of logs that can be pushed - up to 100 kg - USB connection COMBO_500 - 6400/7000 - Roller conveyor with guide to the right of the saw. Painted steel frame with galvanized castors. Load capacity 230 kg, diameter 60 mm, spacing 250 mm, width 320 mm. 3 m. - 6400/7000 SalvaStop 100 to the left of the saw. Working length 6.4 m. Total length 7.0 m. With table top 7 m. Width 320 mm. Demonstration machine additionally equipped with: UP & DOWN FRONT PROTECTION Movable instead of rigid front protection. The guard rises during cutting to ensure safe working conditions. Loading and unloading wood is simplified with the downward-facing guard. The system has another special, secured pneumatic system with linear guidance, which impresses with top quality and cutting-edge technology. SOFTWARE LINK FILES Preparation for data import via a Salvamac file template in CSV format. ----- Hedpfx Aievu Hd Terow Total price demonstration machine from stock 73447 Oberkochen: on request! ----- More options like longer/shorter inlet/outlet, Stop systems on re...

Condition: new, Year of construction: 2026, functionality: fully functional, travel distance X-axis: 470 mm, travel distance Y-axis: 330 mm, travel distance Z-axis: 160 mm, About Us Since 2014, we have been developing and producing our machines in Austria as a machine manufacturer. In addition to our standard machines, which can be individually customized, we are also able to offer special solutions. We will gladly send you our product catalog; simply contact us. Further information can be found at amt – machinetools . com Machine Frame ECO 532C CLEARANCE SALE – while supplies last Due to the further development of our machine series and the transition to the HSC 544, the remaining ECO 532 machine frames are being offered at an attractive clearance price. Hjdpez N Alksfx Airjw Travel range X 470mm (710mm with portal extension for tool changer) Y 330mm Z 160mm (longer travel range available upon request) Machine bed made of mineral cast - high rigidity - high vibration damping - high thermal stability - compact dimensions with a depth of approximately 660mm, allowing it to pass through very narrow doors during installation - weight approximately 400kg Guides and drive - Linear guides, size 20, on all axes - Ball screws with a diameter of 25mm on the X axis, diameter 20mm on the Y and Z axes Scope of delivery Machine frame including portal extension, fully assembled and calibrated. Includes: - Linear guides, ball screws and bearing units - Machine table - Z axis and cross plate The pictures show some optional accessories that are not included in the scope of delivery. For example, spindle, motors, guide rail covers, tool changer, cabin, etc. Numerous options and extensions are available. We will be happy to provide you with expert and comprehensive advice to offer you the perfect solution for your machining task. The offer does not include VAT. Delivery time and payment terms are subject to agreement.

Condition: refurbished (used), Year of construction: 2005, travel distance X-axis: 1,050 mm, travel distance Y-axis: 2,050 mm, travel distance Z-axis: 1,000 mm, workpiece weight (max.): 20,000 kg, table width: 1,140 mm, table length: 1,640 mm, workpiece length (max.): 2,520 mm, workpiece width (max.): 1,520 mm, workpiece height (max.): 945 mm, feed rate Z-axis: 12 m/min, overall weight: 30,000 kg, table load: 20,000 kg, # OPS INGERSOLL GANTRY 1500 / 64 Bit ## Fully Refurbished – Completion Expected 10/2026 For sale is an OPS INGERSOLL wire EDM machine, model GANTRY 1500 / 64 Bit, manufactured in 2005, which is undergoing a comprehensive and professional overhaul in our facility. Upon completion of the overhaul, the machine will be in very good condition, both technically and aesthetically, and will be prepared for immediate use in reliable production operations. ### Technical Data Manufacturer: OPS INGERSOLL Model: GANTRY 1500 / 64 Bit Year of Manufacture: 2005 Condition: Fully Refurbished Completion: Expected 10/2026 Control: Mitsubishi – 64-bit CNC Generator Power: 70 A – Multipulse Travel Ranges X / Y / Z: 1,050 × 2,000 × 1,000 mm Electrode Changer: 15-position pick-up disc changer Working Tank (W × D × H): 1,520 × 2,520 × 945 mm Workpiece Clamping Table (W × D): 1,380 × 2,380 mm Load Capacity: 20,000 kg ### Accessories * CO₂ fire extinguishing system * Cartridge filter system ## Extensive Overhaul The OPS INGERSOLL GANTRY 1500 is undergoing a comprehensive and professional overhaul in our facility. During the overhaul, the machine will be disassembled to over 70%. All relevant components and wear parts will be carefully inspected and, if necessary, professionally refurbished or replaced. ### The following overhaul work will be carried out: * Inspection and, if necessary, replacement of the ball screws and ball bearings of the X, Y, and Z axes * Inspection and, if necessary, replacement of all four ball screws of the tank drive * Inspection and testing of the C-axis for tightness and accuracy * Geometric inspection of all axes according to the OPS INGERSOLL test protocol * Thorough cleaning of the entire machine base * Cleaning of the entire working tank, including replacement of the felt wipers * Overhaul of the dielectric pumps * Replacement of all hydraulic and dielectric lines * Replacement of all pneumatic lines * Thorough cleaning of the control cabinet, generator, and control system * Replacement of all relevant fans and batteries * Overhaul or, if necessary, replacement of power supplies, units, and servo amplifiers * Final laser measurement of the machine after the overhaul ## Quality Control and Erosion Test After completion of all overhaul work, the machine will undergo a comprehensive functional and quality control. This includes, in particular, a detailed erosion test according to the quality and testing specifications of OPS INGERSOLL. The relevant machine functions, as well as accuracy and process reliability, will be checked. ## Ready for Production After Overhaul After successful completion of the overhaul and final inspection, the OPS INGERSOLL GANTRY 1500 / 64 Bit is immediately ready for use. Hsdpfs Afm Hvex Airew With its high load capacity of 20,000 kg, the generous travel ranges, and the large working area, the machine is particularly suitable for the reliable machining of large and heavy workpieces in demanding production environments. A powerful and comprehensively refurbished wire EDM machine for users who value high machine quality, process reliability, and long-term operational capability. 10/16.

Condition: like new (used), Year of construction: 2022, functionality: fully functional, operating hours: 4 h, input frequency: 50 Hz, travel distance X-axis: 1,250 mm, travel distance Y-axis: 1,000 mm, travel distance Z-axis: 180 mm, workpiece length (max.): 1,250 mm, workpiece width (max.): 1,000 mm, workpiece height (max.): 180 mm, actuation type: electric, overall weight: 250 kg, Equipment: documentation/manual, We offer this like-new CNC-Technik ALM-1204-002 machining center, manufactured in 2022. Working area: 1,250 x 1,000 x 180 mm Country of origin: Germany Tangential unit preparation for the AL-M series Electronics upgrade with a 4th motor driver for controlling the tangential module or rotary axis Inductive tool length sensor AMB 1400 FME-P Technical specifications: Input power: 1,400 W Rotation speed: 5,000 ... 25,000 rpm Mounting to the portal: 43 mm mounting flange Collet: ER16 Weight: 1.80 kg Power connection: 4 m power cable Set of 3 ER-16 collets Collet dimensions: Vacuum table milled into the plate Grid spacing 20 mm Includes M6 threaded holes in the grid Vacuum pump TOPAS E101 V 2.2 kW (set) Oil-lubricated rotary vane vacuum pump DS motor, 2.2 kW 230/400 V 50 Hz IE3 Motor version with PTC (standard) Nominal pumping capacity 100 m³/h Ultimate vacuum 0.5 mbar (abs.) without gas ballast 1.5 mbar (abs.) with gas ballast Includes suction filter 1 1/4" and paper filter cartridge Flow rate 84 m³/h The drive operates on 180-watt servo motors and 16 mm ball screws. With this configuration, the maximum speed, depending on the spindle pitch and software, is 500 mm per second. The control system operates with ground and hardened roller guides featuring a gothic profile. Hedpfx Aezfwavsirow If you have any questions or require further information, please write or call us.

Condition: new, neu ca. 10 Wochen ab Auftrags Türkei 67200 € 1270.08 € 100 to 3050 mm 4 (Y1, Y2, X, R) 265 mm 2600 mm 450 mm 530 mm hydraulisch 180 mm/s 10 mm/s 120 mm/s 650 mm 500 mm/s 350 mm/s 250 mm 900 mm 104 mm 100 l 11 kW 4200 mm 1670 mm 2850 mm 8500 kg Standard equipment: 4 axes (Y1, Y2, X, and R) SVP (Servo Variable Pump) Technology SKY 22 CNC control - 21.5” Full HD graphic display with 2D and 3D visualization of the programmed workpiece - Intuitive touch-screen operation (easy drawing of the bending contour using your finger) - User-friendly, interactive programming in either 2D or 3D mode - 2D and 3D simulation of the bending process - Automatic tool selection in 3D mode Hedpfx Aiowirdmerjw - Automatic calculation of the developed length for sheet metal blanking - Automatic bending sequence calculation - Graphical product and tool library - Correction/adjustment capability - USB ports and Ethernet connection for importing, backing up, and exporting programs - Windows operating system - Support for importing IGES, STEP, and DXF files Servo-driven backgauge mounted on linear guides with ball screws spindles Backgauge finger blocks mounted on dual linear guides CNC-controlled crowning (anti-deflection system) Intermediate clamping pieces with quick-release levers for the upper tool Upper tool 1010/A/75°/0.8/105, sectionalized and goose-neck 4-V die block 2009/85° (V = 16, 22, 35, and 50 mm), sectionalized Fiessler AKAS laser safety system mounted on the upper beam Sheet support arms on linear guides Oil fill Operating manual in German or English, including CE Declaration of Conformity OPTIONS: Z1/Z2 axes, Delta X axis, or 6-axis backgauge Delem CNC control DA-66S or DA-69S CAD/CAM software Bending support system Angle measuring system And much more

Condition: used, Table unit from a DROOP & REIN portal milling machine Clamping plate with T-slots made of steel cast gray iron Table unit with clamping plate and very robust guide rail Table clamping surface: 5500 x 2000 mm Travel of the table clamping plate: approx. 3100 mm Table height / overall height: 1050 mm Table load: max. 20 tons Ball screw: Ø 100 mm Thread pitch: 20 mm (single start) - Machining table guided very stably on the bed - Metal telescopic guide rail cover - from a DROOP & REIN portal milling machine - Table longitudinal movement via ball screw and SIEMENS servo motor - Clamping surface with 11 T-slots, 28 mm - Drive via SIEMENS servo motor 1FT6134-6AB71-1AG2 with encoder IC200448S/R (RN 000 B25) Overall length: 9500 mm Width: 2000 mm Overall height: 1050 mm Weight: 27 tons Good condition Hedjthuzpepfx Airsw

Condition: used, Year of construction: 2007, Working area: 2780 x 1140 mm (vertical milling) 2500 x 950 mm (horizontal drilling) X-Y travel: 2980 x 1271 mm Z-axis travel: 200 mm Passage height: 180 mm The structure of the base body is a monolithic construction made of thick-walled steel. It is stiffened by welded triangular plates across the entire machine bed, making it extremely stable. The triangular shape used for load-bearing parts, with a large base, is the secret to ensuring lasting precision and stability. The machine layout allows the user optimal workflow despite minimal space requirements. The base body constructed in this way therefore offers the machining unit a balanced and secure base with particularly good load distribution. The mobile unit carrier is made of a solid monoblock. It is positioned in the X direction on prismatically ground guides via recirculating ball slides. On this mobile unit carrier, the working unit is mounted on prismatic, ground guides and the recirculating ball slide. Description of the units and accessories (basic) Drilling unit: Drilling head with 10 + 4 spindles · 6 individually accessible vertical spindles in X · 4 individually accessible vertical spindles in Y · 2 horizontal spindles in X (1 + 1) · 2 horizontal spindles in Y (1 + 1) · Speed: 4,000 rpm · Power: 2.2 kW · Grid: 32 mm · Drill chuck: M 10 with 11 mm fitting · Extraction nozzle: D = 160 mm Vertical milling unit (position 2) · Tool chuck HSK 63F · Speed 1,500 - 24,000 rpm continuously adjustable via inverter · Motor power 4.4 kW (6 HP) from 12,000 rpm (S1) · Right-hand / left-hand rotation · Ceramic bearings · Scope of delivery: 4 tool chucks (right) without collet chuck · Tool changer · Side-mounted tool magazine 7-way (TR7) with full encapsulation to prevent chipping · 7 tool positions for HSK 63F tool holder arranged in a row · maximum tool diameter D=120 mm · maximum weight per holder 4.5 kg · maximum tool weight of all tools 20 kg (TR7) · angular gears can be accommodated Horizontal milling unit (position 1) Horizontal unit with two opposite outputs for milling and grooving. · Speed 9,000 - 18,000 rpm continuously variable via inverter · 1 output for collet 3-20 mm (ER 32) · 1 output for saw/collet 3-12 mm (ER20) (For saw D = 120 mm / bore 50 mm) · Motor power 3 kW (4 HP) · Max. tool diameter front milling: 20 mm · Max. tool length front milling: 110 mm · Max. tool diameter rear milling: 12 mm · Max. tool length rear milling: 80 mm · Max. saw blade diameter: 100 mm · Bore saw blade (ER 32): 50 mm · Mandrel diameter saw blade (ER 20): 12 mm Work table The work table is designed to guarantee the operator maximum freedom of movement. The vacuum quick clamping system ensures maximum flexibility with precise positioning and optimal grip of the workpieces. · 4 supports 900 mm continuously adjustable in X · 8 vacuum suction cups round D = 110 mm continuously adjustable in Y (2 per support) · 2 stops in X (1 x left / 1 x right) · 1 stop in Y per support (total 6) · The retractable reference stops are controlled via CNC. · Scope of delivery: 4 plug-on adapters for suction cups · Pendulum machining standard (2 working areas) Axis movement The drive system in X, Y and Z is carried out via ground ball screws of the highest precision class. The ball drive screw of the X-axis is located exactly in the center Hsdpex Twdyofx Airow

Condition: used, Year of construction: 2006, * Work area: 2,650 x 1,240 mm * X-Y travel: 2,995 x 1,385 mm * Z-axis travel: 200 mm * Clearance height: 180 mm C-axis deactivated - 3-axis machine The structure of the base body is a monolithic construction made of thick-walled steel. It is reinforced throughout the machine bed by welded triangular plates, making it extremely stable. The triangular shape used for the supporting parts, with a large base, is the key to long-lasting precision and stability. The machine's layout allows the user an optimal workflow despite minimal space requirements. The base body, constructed in this way, provides the machining unit with a balanced and secure base with particularly good load distribution. The mobile unit carrier is made from a solid monoblock. It is positioned in the X-direction on prismatically ground guides via ball screw slides. The machining unit is, in turn, attached to the mobile unit carrier on prismatic, ground guides and the ball screw slide. Description of units and accessories (base) Drilling unit: Drilling head with 12 + 6 spindles * 7 individually selectable vertical spindles in X * 5 individually selectable vertical spindles in Y * 4 horizontal spindles in X (2+2) * 2 horizontal spindles in Y (1+1) * Speed: 4,000 1/min * Power: 2.2 kW * Grid: 32 mm * Drill chuck: M 10 with Morse taper No. 11 Nut saw unit in "X": * Integrated in the drilling head * Nut saw blade with a diameter of up to max. 120 mm Main milling unit (Position 2): * Tool holder HSK 63F * Speed 1,500 - 24,000 1/min, stepless via inverter * Motor power 4.4 kW (6 hp) from 12,000 1/min (S1) * Motor power 6.6 kW (9 hp) from 12,000 1/min (S6) * Right/left rotation * Ceramic bearings * Scope of supply: 4 pcs. tool holder (right) without collet Tool changer R8L Automatic tool changing device for 8 tools. Mounted on the rear unit carrier for quick access to the tools. * Number of tool positions: 8 * Max. tool diameter: 120 mm Hedpsx Twccofx Airew * Max. weight per tool: 4.5 kg * Max. total weight of all tools: 22 kg * Holder for 1 angular gear * Mounted and moving in X Horizontal milling unit (Position 1) Horizontal unit with two opposite outlets for milling and grooving. * Speed 9,000 - 18,000 1/min, stepless via inverter * 1 outlet for collet 3-20 mm (ER 32) * 1 outlet for saw/collet 3-12 mm (ER20) (For saw D=120 mm / bore 50 mm) * Motor power 3 kW (4 hp) * Max. tool diameter, front milling: 20 mm * Max. tool length, front milling: 110 mm * Max. tool diameter, rear milling: 12 mm * Max. tool length, rear milling: 80 mm * Max. saw blade diameter: 100 mm * Bore in saw blade (ER 32): 50 mm * Arbor diameter, saw blade (ER 20): 12 mm Work table The work table is designed to guarantee the operator maximum "freedom of movement". The vacuum quick-clamping system offers maximum flexibility with precise positioning and optimal workpiece clamping. * 6 supports 1000 mm, stepless pneumatically adjustable in X * 12 vacuum suction cups, round D = 110 mm, steplessly adjustable in Y (2 pcs. per support) * 2 stops in X (1 x left / 1 x right) * 1 stop in Y per support (total 6 pcs.) * The retractable reference stops are CNC-controlled * Pendulum machining standard (2 working areas) --- other clamping systems are available as optional extras --- Axis movement The drive system in X, Y and Z is via ground ball screws.