Used Ball Header for sale (3,254)

Condition: used, mileage: 1,54,360 km, power: 103 kW (140.04 HP), first registration: 09/1998, fuel type: diesel, empty load weight: 3,920 kg, maximum load weight: 3,580 kg, overall weight: 7,500 kg, tire size: 365/80R20, axle configuration: 4x4, wheelbase: 2,830 mm, color: white, driver cabin: day cab, gearing type: mechanical, emission class: euro2, suspension: steel, number of seats: 2, loading space length: 1,950 mm, loading space width: 1,900 mm, loading space height: 400 mm, Equipment: additional headlights, all wheel drive, cabin, differential lock, low noise, power assisted steering, trailer coupling, Vehicle location: Bovenden, steel body, short cab, high roof, air-suspension seat, rear window, 8-speed gearbox, ABS (anti-lock braking system), constant throttle, auxiliary drive, raised exhaust, differential lock, long-range headlights, rotating beacon, trailer hitch ball, towing device, low-noise G1, winter service equipment, swing-out tailgates, roof hatch. Wheelbase: 2830 mm, Body: 3-sided tilting body, axle ratio: slow, trailer brake system, two-line, mounting brackets front, mounting brackets rear, higher cab roof, fine dust and pollen filter, sound and heat insulation for cab, auxiliary transmission with intermediate and super-crawl gear, dual clutch, shift plate, hydraulic system with 4 circuits, tilting cylinder, hydraulic connection at the rear 6-way, hydraulic connection at the rear 4-way, cell 3+4, separate return line at the rear, hydraulic connection at the front 4-way, cell 1+2, hydraulic connection at the front 4-way, cell 3+4, separate return line at the front, engine brake, engine PTO switchable, PTO front 1 3/8 keyway, PTO rear split 1 3/8 keyway. Hodpfx Aezx Tlzjirjw Loading height approx. 1420mm! Approx. €3,000.00 invested (paint, refurbishment and technology). Matching snowplow -9996- available for an additional charge of €1,500.00 net! ACCESSORY INFORMATION WITHOUT GUARANTEE, subject to changes, prior sale and errors!

Condition: excellent (used), Year of construction: 2016, Cutting Capacity 0° round (tube): 300 mm Cutting Capacity 0° round (solid material): 180 mm Cutting Capacity 0° rectangular horizontal (hollow section): 320 x 290 mm Cutting Capacity 0° bundle (tube): 320 x 160 mm Cutting Capacity -45° round (tube): 300 mm Cutting Capacity -45° round (solid material): 110 mm Cutting Capacity -45° rectangular horizontal (hollow section): 300 x 280 mm Cutting Capacity -60° round (tube): 200 mm Cutting Capacity -60° round (solid material): 80 mm Hedpsxz Dqmsfx Airow Cutting Capacity -60° rectangular horizontal (hollow section): 190 x 200 mm Cutting Capacity +45° round (tube): 270 mm Cutting Capacity +45° round (solid material): 110 mm Cutting Capacity +45° rectangular horizontal (hollow section): 270 x 200 mm Table height, material feed: 800 mm Main motor: 2.6 kW Cutting speed, stepless: 20 - 100 m/min Saw blade size: 3660 x 27 x 0.9 mm Machine dimensions (L x W x H): approx. 1800 x 950 x 1400 mm Net weight: 585 kg Accessories / Special features: • Semi-automatic swing-frame metal band saw • After the cutting cycle is started, the vice clamps automatically – after completion, it returns to its starting position • For mitre cuts from +60° to -45° with frequency inverter • Suitable for cutting stainless steel, tool steel, hollow profiles, and solid materials • Fully hydraulically controlled sawing functions • Saw drive with low-maintenance, oil-lubricated worm gear • Robust three-phase motor • Motor equipped with overload protection • Ball-bearing turntable • Saw arm inclined at 25°, resulting in longer saw blade service life • Saw arm swivels from +60° to -45° • Chip removal brush for optimal saw blade cleaning and maintenance • Frequency inverter: allows stepless adjustment of saw blade speed from 20 - 100 m/min • BRP – Saw band monitoring • Hydraulic vice with manual quick-release for lateral adjustment • Limit switches control upper and lower saw arm positions • No need to set the upper end point • Length stop with scale, left-side removal 3 m • Cut detector • Swivelling control panel • Micro-spray device • 2 x roller conveyors: 3 m discharge left, 6 m feed right • CE compliant Siegfried Volz Werkzeugmaschinen Rüschebrinkstr. 151-153 DE - 44143 Dortmund - Wambel

Condition: used, mileage: 32,100 km, power: 220 kW (299.12 HP), first registration: 06/2024, fuel type: diesel, overall weight: 13,500 kg, axle configuration: 2 axles, color: red, gearing type: automatic, total width: 2,520 mm, total height: 2,963 mm, loading space volume: 6 m³, loading space length: 4,200 mm, loading space width: 2,350 mm, loading space height: 600 mm, Year of construction: 2024, Equipment: ABS, air conditioning, electronic stability program (ESP), M-Benz Atego 1330K Meiller Tipper VIN: 754954 Chassis / Components: * Wheelbase: 3,260 mm * Leaf spring suspension * Tires: 275/70 R.22.5 * Condition: Tires ~90%, Body ~90% * 1 x Diesel tank, plastic * 1 x Ad-Blue tank * 1 x Meiller hydraulic tank * Underrun protection, fixed * Ball hitch, vertical load 150 kg * Hydraulic connections for trailer Cab: * Cab: S Classic Space * 3 seats * Automatic climate control * Radio Hodsy Ngk Ujpfx Airsw * AUX, USB * Manual roof hatch * Cab rear wall with window * 2 x Rotating beacons Body: * Meiller three-way tipper, year of manufacture 2024 * Dimensions L x W x H: 4.20 m x 2.35 m x 0.60 m * Headboard: 800 mm * Certificate: EN12642 Code XL * 3 x Lashing points per side Engine / Transmission: * 7,698 ccm // 300 hp / 220 kW // EURO 6e * Power-Shift 3 / Automatic * Engine brake / High Performance Engine Brake * Differential lock * Power take-off Weights: * Gross vehicle weight: 13,500 kg * Unladen weight: 6,785 kg * Payload: 6,715 kg Other: * German vehicle * 1 previous owner * New inspection - upon request * 32,100 km * TOP condition New main inspections / safety checks or weight reductions / increases are possible upon request. We will gladly assist you in obtaining export / transit license plates. We can also arrange for the transport of your purchased vehicles within Germany. Contact us! We speak the following languages: German, English, and Russian! No liability for printing & typographical errors, changes, prior sale, and errors reserved! Who are we? Leible Nutzfahrzeuge is a family-owned company based in Kehl am Rhein. Thanks to our many years of experience in the preparation and distribution of commercial vehicles, we are a reliable partner for customers worldwide. The particular strength of Leible Nutzfahrzeuge lies in the distribution of new and used commercial vehicles. On 11,000 m², you will find a large selection of vehicles. Our corporate philosophy is characterized by fairness and integrity. Since customer satisfaction is very important to us, we offer our customers an excellent all-round service package and provide them with a competent contact person who will support them in the purchase or sale of vehicles. Convince yourself! Our services for you: Loading of vehicles We will gladly help you load your purchased vehicles. Organization of special transport We will gladly assist you in organizing special transport. Day licenses / export license plates We will gladly help you obtain export license plates / short-term license plates. Handling of customs formalities We will gladly help you with customs matters.

Condition: used, mileage: 3,000 km, power: 155 kW (210.74 HP), first registration: 10/2026, fuel type: diesel, overall weight: 7,490 kg, axle configuration: 4x2, wheelbase: 3,020 mm, color: white, driver cabin: other, gearing type: automatic, suspension: steel, number of seats: 2, loading space volume: 3 m³, loading space length: 3,800 mm, loading space width: 2,350 mm, loading space height: 400 mm, Equipment: ABS, air conditioning, cruise control, differential lock, hydraulics, traction control, trailer coupling, Color: Arctic White, Body manufacturer: Meiller, permissible total weight: 7490 kg, cargo area (L W H): 3,800 mm x 2,350 mm x 400 mm, cargo area volume: 3 m³, seats: velour, interior color: anthracite, leaf spring suspension, trailer coupling: fixed ball head up to 3.5 t D27.1, ring spring, electronic braking system EBS, electronic stability program ESP, traction control system ASR, armrest for driver/passenger, USB connection, hands-free Bluetooth system: radio with USB connection, lane keeping assist, reversing camera, rain sensor, power steering, electric windows, sunroof, electric exterior mirrors, tire pressure control, immobilizer, central locking, rear differential lock, underrun protection, twin tires, construction package, LED daytime running lights, light sensor, ATTENTION ASSIST, digital instrument cluster, speed limiter: 90 km/h, traffic sign recognition, trailer brake connection. Driver's comfort suspension seat, passenger's fixed seat, single side sun visor, instrument cluster 12.7 cm with video function, digital tachograph, driver assistance map region Europe, remote update of driver assistance map, Mercedes-Benz OnRoadService, TruckLive. Active Safety: Active Sideguard Assist 2, Active Brake Assist 6 Plus, Frontguard Assist, heated front mirror. ClassicSpace S cab, width 2.30 m, cab rear wall with window, one-step cab entry, step on side wall, LED outline marker light, heating, electronic compressed air supply unit, side protection, trailer socket 12 V, 13-pin, fixed to frame, trailer socket 24 V, 15-pin. Body: Factory-built MEILLER TRIGENIUS D205, 3.8 x 2.35 x 0.4 m, Meiller pump 5-piston type 255/1, front wall with tube supports, front wall height 700 mm, side wall height 400 mm, shovel/broom holder, lashing points in the tipper bed, side wall lashing eyes. ATTENTION: mobile fleet, appointments and viewings only by prior arrangement! Vehicle is located at our Augsburg site. Changes, prior sales and errors expressly reserved. Hedpfxo Agc Dvj Airow

Condition: used, mileage: 473 km, power: 129 kW (175.39 HP), first registration: 01/2026, fuel type: diesel, empty load weight: 2,474 kg, maximum load weight: 1,026 kg, overall weight: 3,500 kg, tire size: 225/65 R16, axle configuration: 4x2, wheelbase: 4,100 mm, next inspection (TÜV): 01/2027, fuel consumption (urban): 728 l/100km, color: white, driver cabin: other, gearing type: automatic, suspension: steel, number of seats: 6, total length: 7,283 mm, loading space volume: 10 m³, loading space length: 3,150 mm, loading space width: 1,800 mm, loading space height: 1,900 mm, lifting height: 2,700 mm, Equipment: ABS, air conditioning, cruise control, onboard computer, traction control, trailer coupling, CERTIFIED PRE-OWNED Plus, Color: White IC 194, Current tires: M+S tires, Unladen weight: 2474 kg, Permissible total weight: 3500 kg, Cargo area (L W H): 3,150 mm x 1,800 mm x 1,900 mm, Tire size: 225/65 R16, Cargo area volume: 10 m³, 1st axle: , 2nd axle: , Seats: Fabric, Interior color: Gray, Leaf spring suspension, 2 x Airbags, Trailer hitch ball: Trailer load 3500 kg, Electronic Stability Program ESP, Anti-Slip Regulation ASR, Automatic climate control, Adaptive Cruise Control ACC, Comfort driver's seat, Driver's seat with hydraulic damping, Driver's seat with height adjustment, Driver's armrest, Heated driver's seat, Co-driver's bench seat for 2 persons, Automatic headlight control, Headlight range adjustment, Radio, Digital radio reception DAB, Multi-function display, USB connection, Bluetooth audio streaming, Hands-free system with Bluetooth, Lane keeping assist, Rear parking assist, Rear view camera, Driver fatigue detection, Rain sensor, Multi-function leather steering wheel, Power steering, Adjustable steering column, Electric windows 2-way, Outside temperature display, Electrically adjustable and heated exterior mirrors, Wide-angle mirrors, Tire pressure control, Immobilizer, Central locking with remote control, Tinted glass, Partition wall closed, Cargo area floor: Wood, Cargo area wall lining: High-grade plastic, Rear doors with 270° opening angle, Sliding door on the right, Hill-start assist, Daytime running lights, Connector plug 1x13-pole, Cup holder, Light sensor, Attention assist, Digital instrument cluster, Apple CarPlay and Android Auto (wireless), Speed limiter: 160 km/h, Driving profile selection: ECO and Power mode, Traffic sign recognition, Emergency brake assist, 6 seats, 8-speed automatic transmission (ZF), Windows in the second row of seats, Vehicle was converted to a 6-seater, Truck registration, VDI interface for telematics systems, Trailer socket 12V 13-pole, Storage compartment under co-driver's bench seat, 2 rows of tie-down rails in the cargo area, Payload: 1026 kg, VEHICLE LOCATION, 90441 NUREMBERG, DIESELSTR. 65, Your contact person, Mr. Bächer, Tel. Hjdpfxe Agc D Ds Airew

Condition: used, mileage: 1,750 km, power: 110 kW (149.56 HP), first registration: 05/2024, fuel type: diesel, overall weight: 5,600 kg, color: blue, gearing type: mechanical, emission class: euro6, Equipment: ABS, air conditioning, all wheel drive, soot filter, Your MULTICAR – authorized dealer with expertise, service, and consulting – offers you: MULTICAR FUMO CARRIER 4x4 with ball-type quick-change system First registration: 07.05.2024 Mileage: 1,750 km / 48 operating hours Condition: like new Standard equipment: - 3.0-liter Iveco turbocharged diesel engine, low-emission according to Euro VI OBD-E, 110 kW / 150 hp - Wheelbase (2,990 mm) - 4x4 drive including crawl speed - 10 forward and 2 reverse gears - Tilting comfort cab, power steering - Fully synchronized 5-speed manual transmission (90 km/h) Optional equipment: AIR CONDITIONING Mobile hydraulics 03-3 Summation control for working circuits Pressure switching 200/250 bar Swiveling function front 2nd swiveling function front 3rd swiveling function front Swiveling function rear Front lift with DIN mounting plate Rear hydraulics 03-8 Trailer tipping hydraulics Hedpfe Agdfljx Airsw Leak oil line front Ground pressure control Comfort swiveling Area clearing function Front extension automatic Speed-dependent spreading Tires 285/65 R16C Electric windows Electric/heated exterior mirrors Suspension seat for driver Suspension seat for passenger Differential lock Spiral fan Increase in permissible gross vehicle weight to 5.6 t Engine brake Repeating lights with ASW LED warning beacon orange left LED warning beacon orange right 2 x LED work lights rear Radio installation complete DAB Heated windshield Attachment quick-change system KWS long Dust boxes right and left on the chassis Drawbar coupling, sprung Ball-type coupling 3.5t Socket front 4-pole AD regulation outside Device console mounting kit 1 Warning markings FH front, warning markings superstructure Battery disconnect switch Reversing warning buzzer Three-way tipper long, for KWS front wall extension Safety package (current list price net 155,486.00 €) Errors, changes, and prior sale are subject to change. Our general terms and conditions apply. Benefit from our many years of experience in sales and service and have us create your individual offer. Also take advantage of our leasing and financing options. We promise you competent advice and support from our qualified staff. You can find further offers from the commercial vehicle manufacturers MULTICAR and ISUZU, as well as a comprehensive range of attachments, at: Tel.:

Condition: new, Year of construction: 2026, cutting height (max.): 150 mm, cutting range round steel at 45°: 108 mm, cutting range round steel at 90°: 108 mm, BERG+SCHMID Double Miter Bandsaw GBS 250 Super AutoCut, Speed: 35 + 70 • Miter angle left: 60° + right: 45° • Quick-release clamping device, adjustable • Solid clamping device + machine casting • Ball-bearing swivel table • Hydraulic brake cylinder • Large, robust material support • Cooling system • Worm gear running in an oil bath • Enclosed saw frame • Adjustable ball roller bearing • Tool compartment – door in the base • Cutting monitoring via ammeter • Cutting pressure feed rate regulator • Support roller (infeed side) • Machine base (delivered disassembled) GBS 250 Super AutoCut 3-Stage System: I. Automatic saw frame lowering via the hydraulic cylinder, steplessly adjustable feed rate, with limit switch at the end of the cut II. Fast lowering of the saw frame to the workpiece, then switching to normal sawing feed. (e.g., for scoring) Hedpjr Ik Sqefx Airew III. Hydraulic cylinder acts as a brake cylinder: a) Manual operation (e.g., for ejecting) or b) Lowering in the rest position Saw band dimensions: 2765x27x0.9mm Additional accessories such as saw blades, roller conveyors, measuring stops, minimum quantity lubrication, etc. available upon request! Delivery time: from stock in Waiblingen, Beinstein.

Condition: ready for operation (used), Year of construction: 2011, functionality: fully functional, machine/vehicle number: 167L1131108, feed length X-axis: 1,600 mm, feed length Y-axis: 700 mm, feed length Z-axis: 700 mm, total height: 3,100 mm, total length: 4,800 mm, total width: 3,700 mm, table width: 700 mm, table length: 1,750 mm, overall weight: 11,000 kg, spindle speed (max.): 10,000 rpm, number of slots in tool magazine: 24, input voltage: 400 V, type of input current: three-phase, JANUS SMART VMC 1600 Vertical Machining Center We offer for sale a highly efficient and stable JANUS SMART VMC 1600 CNC vertical machining center, manufactured in 2011. The machine features a robust, heavy-duty construction with a weight of 11,000 kg, which guarantees excellent vibration damping and high geometric rigidity during demanding industrial machining. Hedpfx Ae Adudaeirsw The machine underwent a thorough overhaul in 2025, ensuring excellent accuracy and rigidity. As part of the service, the ball screws were reconditioned, the bearings were replaced, and all telescopic covers were reconditioned. The machine is fully functional, connected, and ready for immediate operation without any additional costs. The center is equipped with a reliable FANUC Series 0i-MD control system, a dynamic 10,000 rpm spindle with a BT40 taper, and an automatic tool changer with a capacity of 24 tools. Scope of the overhaul (2025): Reconditioning of ball screws in the X and Y axes Bearing replacement (ball screw bearings) Complete reconditioning of telescopic covers in all axes (X, Y, Z) Technical parameters: Parameter: Value / Specification Manufacturer: JANUS Obrabiarki Model: VMC 1600 Year of manufacture: 2011 Condition after overhaul: Yes (2025) CNC control: FANUC Series 0i-MD Work table: 1750 mm x 700 mm Axis travel (X / Y / Z): X 1600 mm, Y 700 mm, Z 700 mm Maximum spindle speed: 10,000 rpm Spindle taper: BT40 Tool magazine: 24 tools Maximum tool diameter: 150 mm / 85 mm Machine weight: 11,000 kg Power supply: 3x 400 V; 50 Hz Machine equipment: Screw chip conveyor Automatic tool changer (ATC) with 24 positions Coolant system for the work area Full protective cabin with sliding work doors Automatic central lubrication system for guides and ball screws Work area lighting and a 3-color status indicator lamp Electronic handwheel (MPG) for convenient workpiece zero setting Additional information: Technical condition: very good (after mechanical service in 2025), machine in continuous working condition, connected – possibility of testing "under power".

Condition: good (used), Year of construction: 2014, operating hours: 23,500 h, functionality: fully functional, machine/vehicle number: P14ZYG488, Year 2014 with Fanuc series 31i Model B5 X/Y/Z: 500 x 400 x 330 mm 21-tool magazine with 4th axis TECHNICAL SPECIFICATIONS Table dimensions: 650 x 400 mm Maximum table load: 300 kg T-slots (3 slots, distance 125 mm): 14 mm X/Y/Z travels: 500 / 400 / 330 mm Table – spindle nose distance: 250 – 580 mm (with 100mm riser) Spindle axis – Z-axis guide distance: 380 mm Table height: 735 mm SPINDLE Spindle nose: 55 mm ISO 30 Spindle speed (standard): 100 to 10000 min-1 (opt. 24000 min-1) Acceleration time from 0 to 15000 min-1: 0.46 sec Time for reversal at 4000 min-1: 0.40 sec Maximum spindle torque (-1700 min-1): 78 Nm Continuous power: 3.7 kW (2800 – 8000 min-1) Power for 1 minute ED: 13 kW (1700-3500 min-1) Drilling capacity in steel: Ø 20 mm Milling capacity in steel: 70 cm3/min Tapping capacity in steel: M 12 Z-AXIS Hodszzxk Uopfx Airsw Ball bearing guide Cutting feed (AC servomotor 1.0 kW / Nm): 1 to 30000 mm/min Rapid traverse in X, Y, and Z: 54 m/min Rapid traverse: more than 1.5G TOOL MAGAZINE Tool type: ISO 30 according to DIN 69871A or BT30 Number of tools: 21 Tool change time: 0.8 sec. 2kg / 1.2 sec. 3 kg Chip-to-chip tool change time: 1.4 sec. Maximum tool diameter: 80 mm for maximum tool length 250mm Maximum tool weight: 2kg / 3kg at reduced speed Maximum weight of the 21 tools: 22 kg or 33 kg MACHINE TABLE / X-Y AXES Ball bearing guides New high-speed Fanuc alpha i motors AC servomotor 8i 2.5kW, 8Nm Rapid traverse in X and Y: 54 m/min on 30 mm Cutting feed: 1 – 30'000 mm/min Minimum input/output increment: 0.001 mm Positioning accuracy in X/Y/Z axis: ±0.002 mm FANUC 31i-B5 NUMERICAL CONTROL: 3 axes (option for 4th and 5th axis) Simultaneous linear interpolation up to 5 axes Work time per block: 15 sec. Memory capacity: 200 programs (512 KB) RS 232C and USB interface, Ethernet interface Flashrom card reader with editing functions Manual Guide i with assistance CONNECTION Voltage: (3 phases) 400V ±5% Frequency: 50Hz ±1 Hz Nominal power: 20 kVA Compressed air: 5 bar minimum, 0.13 m3/min Fuse: 34 A min The technical details provided are given without guarantee, subject to error or omission.

Condition: used, mileage: 58,820 km, power: 96 kW (130.52 HP), first registration: 08/2022, fuel type: gasoline, empty load weight: 1,556 kg, maximum load weight: 539 kg, overall weight: 2,095 kg, axle configuration: 4x2, wheelbase: 2,716 mm, next inspection (TÜV): 11/2028, fuel: super 95, energy efficiency: C, CO₂ emissions: 144 g/km, fuel consumption (urban): 7.8 l/100km, fuel consumption (extra-urban): 5.4 l/100km, fuel consumption (combined): 6.3 l/100km, color: white, driver cabin: other, gearing type: mechanical, emission class: euro6, number of seats: 5, total length: 4,500 mm, total width: 2,160 mm, total height: 1,820 mm, Year of construction: 2022, maximum speed: 183 km/h, Equipment: ABS, air conditioning, airbag, central locking, cruise control, electronic stability program (ESP), fog lights, navigation system, onboard computer, parking sensors, power assisted steering, second-hand vehicle warranty, sliding door, soot filter, traction control, trailer coupling, Exterior * Trailer coupling, ball head / towing capacity 1500 kg * Heated and electrically adjustable exterior mirrors * Sliding door, left side, with window * Sliding door, right side, with window * Halogen fog lights Interior * Air conditioning * Electrically operated front windows * Headrests for passenger compartment seats * Glove compartment, passenger side, closed * Driver's seat with height adjustment Safety * Automatic deactivation of front passenger airbag * Electronic Stability Program (ESP) * Airbag for driver and front passenger * Braking system with ABS and ASR * Heated rear window Comfort and Environment * Rear view camera * Rear door, two-leaf, 180 degrees, with window * Attention Assist * Hill-start assist * ECO start-stop function * High beam assist * Blind Spot Assist * Traffic Sign Assist * Active Parking Assist * Particulate filter * Warm air duct to the passenger compartment * Auxiliary heater, electric * Mercedes-Benz emergency call system * Multifunction steering wheel * Cruise control * LED High Performance headlights * Light and rain sensor Multimedia * Live Traffic Information * Navigation * Instrument cluster with color display * Digital radio (DAB) with Bluetooth hands-free system Equipment lines and packages * Navigation package * Parking package Condition/Documents * COC papers Other * 2 USB interfaces in center console, rear * 6-speed manual transmission * 96 kW engine power * Sliding door rail cover, black, textured Hjdpfs Agphnsx Airow * Active Brake Assist * Active Lane Keeping Assist * Active Safety Package * Arctic white * Armrest with storage compartment * Vent window in sliding doors * Turn signal indicator in exterior mirror, halogen technology * Digital Extra: Extended MBUX functions * Digital Extra: Remote Services Plus * Digital Extra: Smartphone Integration * Emissions standard Euro 6d-TEMP * Fixed window, rear * Window in tailgate with wiper and washer system * Rear bench seat, FOLD & LOAD, 1/3 : 2/3 split * Windshield with heat-insulating glass * Weight variant 2,095 kg * Handle strip, black, textured * Seatbelt warning system for driver, front passenger and rear * i-Size child seat attachment * Interior lighting, front + 2nd row * Interior mirror * Interior trim, high-quality design * Child lock on doors in passenger compartment * Communication module (LTE) for digital services * Plastic floor in front passenger compartment * Plastic floor in trunk / cargo area * Steering wheel adjustable in inclination and height * Light package * MBUX multimedia system incl. navigation & DAB * Center armrest and door panels, black, textured * Center airbag, thorax sidebags, windowbags front + rear * Engine M 200.73 13 LA 96 kW (131 hp) * Tire pressure monitoring system, front and rear axle, wireless * First-aid kit Miscellaneous: * Nationwide delivery for €399 net plus VAT (€474.81 incl. VAT). * For all vans: On request, a 12 or 24-month Mercedes-Benz used car warranty is available. * We will gladly take back your current vehicle, credit it towards the new vehicle, or pay you the purchase price. * Leasing / financing via Mercedes-Benz Bank. We will gladly prepare an offer for you. * No liability for printing and typographical errors * Subject to errors and prior sale.

Condition: used, mileage: 6,700 km, power: 55 kW (74.78 HP), first registration: 02/2018, overall weight: 3,500 kg, fuel type: diesel, color: orange, gearing type: mechanical, emission class: euro5, loading space width: 1,500 mm, loading space length: 2,000 mm, loading space height: 400 mm, number of seats: 2, Equipment: ABS, all wheel drive, soot filter, Multicar M27 Compact * 3500 kg Hsdpfx Ais Agqfvorew * 2 L Turbo Diesel, 55 kW / 102 hp * 6700 km / 609 operating hours * Switchable all-wheel drive * Wheelbase: 2450 mm (short) * 5-speed manual transmission with reduction gear * 4-channel ABS, 4-wheel disc brakes (internally ventilated) * 3-circuit hydraulics * Swiveling front section * Rear hydraulics * Quick-change system for attachments SWV 500 * Lighting bar * Driver's suspension seat * Electrically adjustable and heated exterior mirrors * Electric windows * Ball-type trailer hitch * Tires 225/75 R16c M&S, new * Inspection service, new * New TÜV and emissions test * Workshop checked * 12-month used vehicle warranty through a warranty provider. Optional winter package: Various spreaders and snowplows, new and used, in stock. Leasing / financing / vehicle rental / trade-in / delivery to your location possible. You can find more vehicles of the Fuso Canter and Multicar brands, as well as various attachments, at: - Errors and prior sale excepted. - Our general terms and conditions apply.

Condition: used, mileage: 66,811 km, power: 170 kW (231.14 HP), first registration: 03/2020, fuel type: diesel, overall weight: 11,990 kg, axle configuration: 2 axles, next inspection (TÜV): 05/2027, color: white, gearing type: mechanical, emission class: euro6, loading space length: 4,200 mm, loading space width: 2,350 mm, loading space height: 500 mm, Year of construction: 2020, Equipment: ABS, air conditioning, electronic stability program (ESP), ATEGO 1223 K Dump Truck, MEILLER 3-way tipper, with 2 towing hitches * ZAA towing hitch with ball coupling, 3,500 kg * Vehicle number for customer inquiries: 4853 * Engine type Euro VI, with OBD-C * Active Brake Assist * Differential lock, rear axle * Air conditioning * Middle seat, with 3-point safety belt * Engine type Euro VI, D * Transmission, manual * Lane keeping assist * Environmental badge (green) * Trailer coupling G 145, for ZAA * Trailer coupling Ringfeder * Trailer coupling, low, ball coupling up to 3.5 t, D27.1 * Service booklet maintained * Electronic Stability Program (ESP) * Standard 3-way tipper, 4200 x 2350 x 500 mm * Trailer brake, 2-line * Three-seater * Electronic braking system with ABS and ASR * Driver's air suspension seat, standard * Power windows, electric, on both sides * Gearbox G 90-6/6.70-0.73 * Engine brake, standard system * Auxiliary drive, single * Digital tachograph, EC, speed, ADR * Cruise control * AdBlue tank 25 l * Trailer socket 12 V, 13-pole, frame-mounted, LED * Trailer socket 24 V, 15-pole * Body type: Dump truck / tipper semi-trailer * Side wall height 500 mm * Roof hatch / ventilation flap, roof * Cab rear wall, with window * Weight variant 11.99 t (4.4/8.1) * Main mirror, electric, driver's side * Rear suspension 8.1 t, parabolic * Tipper chassis * Plastic tank 120 l, left * Meiller pump, 5-piston, type 255/1 * Engine OM934, R4, 5.1 l, 170 kW (231 hp), 900 Nm * Wheelbase 3260 mm * Tires tubeless, 245/70 R 19.5 front * S-cab ClassicSpace, 2.30 m, tunnel * Disc brake on front axle, drum brake on rear axle * Sun visor, side, driver and passenger side * Stabilizer, under frame, rear axle * Pre-installation for toll collection * New Atego * Tipper bed, 5 mm floor * Hydraulic unit MB 60-1c, pump * Control code EBS, 4th generation * Control code, Global AdBlue Sensor (GMS DEF) * Front wall height 700 mm * Digital tachograph, 2nd generation, ADR * Lashing recesses in the tipper bed Hedpe Af A Hlsfx Airsw * Front suspension 4.4 t, parabolic * Factory tipper, Meiller * 2/3-door No liability for printing and typographical errors Sales only to commercial customers Errors and prior sale are reserved* Changes, prior sale and errors are expressly reserved. The description serves to identify the vehicle and does not constitute a guarantee in the legal sense of the purchase contract. The description according to the purchase contract is decisive. * TOP SERVICE + QUALITY * We would be happy to provide you with a LEASING - FINANCING - HIRE PURCHASE offer * Guarantee insurance possible upon request from the insurer * TÜV / UVV LBW / tachograph inspection and installation of OBU device by our partners on site * Customs plates for 30 days * All customs documents for export are possible, but must be requested individually * TOLL for Toll-Collect can be booked in-house * free transfer from Stuttgart Airport or Metzingen (Württ) train station * TRAIN STATION: 72555 METZINGEN/WÜRTT. * FOR ENGLISH * Andreas Pittas * Thomas Pittas * Alexander Pittas * Robin Pittas WHATSAPP number * ---- Visit us on our website at * constantly over 200 vehicles in stock

Condition: used, mileage: 1,49,000 km, power: 140 kW (190.35 HP), first registration: 11/2017, fuel type: diesel, overall weight: 3,500 kg, color: blue, gearing type: automatic, emission class: euro6, number of seats: 3, total length: 6,000 mm, loading space length: 3,500 mm, Equipment: ABS, air conditioning, central locking, navigation system, soot filter, Chat with us now via WhatsApp: Get in touch with our sales consultant quickly and easily. Attention!!! Sales preferably to commercial businesses. Internal ID number: [ 3386 ] ----Optional extras: * 12-64 months warranty (valid throughout the EU) * New inspection * New TÜV & AU (technical inspection and emissions test) * Nationwide delivery * Financing possible, even without a down payment * Spring offer: Upon request and for an additional charge of only €999, increase the towing capacity to up to 3,500 kg (vehicle and manufacturer dependent). ----Vehicle highlights: Hedpszbzfpefx Airew * 19% VAT can be shown * Regularly maintained * German vehicle * Immediately ready for use * 1st owner * Euro 6 standard * Accident-free * High + Long * Trailer hitch 2,500 kg * Automatic climate control * Cruise control * Reinforced springs * Rearview camera * Bluetooth multimedia system * 3 seats Special equipment: Hill start assist, trailer hitch: ball head, for increased towing capacity - 3.5 t, trailer socket 13-pin, outside temperature display, ceiling light in the cargo area with door contact, Success package, digital tachograph, downloadable, windows for rear doors, window in the cargo/passenger compartment: - fixed, front right, generator 180 A, rear door (opening angle 270 degrees), wooden floor in the cargo area, cargo area partition with window, navigation system Becker MAP Pilot, roof rails with integrated step, smoker's package, spare wheel holder under the end of the frame incl. jack, rearview camera 138 degrees, interior mirror, seats in the driver's cab: driver's seat comfort, stabilizer rear, stabilizer front reinforced, shock absorbers reinforced, lining in the cargo/passenger compartment: plywood, fleece battery 95 Ah Additional equipment: 3rd brake light, adaptive brake light, airbag driver side, indicator for washer fluid level, exterior mirrors electrically adjustable and heated, both, exterior mirrors with integrated turn signal, brake assistant, braking system with ABS+ASR, roof lining in the driver's cab, glove compartment lockable, body/superstructure: high-roof panel van standard, child safety lock, fuel filter with water level sensor, fuel tank: main tank 75 liters, load securing/lashing points, headlight range control, model update, engine 3.0 L - 140 kW CDI CAT, wheelbase 3665 mm, tire repair kit with compressor, low emissions according to Euro 6 exhaust standard, sliding door cargo/passenger compartment right, safety belt system with warning system (driver side), seat cover/upholstery: fabric Lima, maintenance interval display Assyst, heat protection glazing, permissible total weight 3.50 t ----Do you want to lease or finance? We offer attractive offers – even without a down payment! Please contact us. Contact: Phone: Email: Location: Nutzfahrzeuge West GmbH Rudolf-Diesel-Str. 2 45711 Datteln – Germany Opening hours: Mon-Fri: 9:00 AM – 6:00 PM Sat: 9:00 AM – 2:00 PM ----Note: All information on the Internet is non-binding and serves only as a general description of the vehicle. Errors, typos and prior sale are reserved. The binding condition of the vehicle results exclusively from the purchase contract on site or through written assurances. Vehicles with a mileage of over 50,000 km or older than 3 years are preferably sold to our commercial customers.

Condition: new, NSK 7940A5TRDULP3 Angular contact ball bearing set = 2 pieces, unused in original packaging, 100% functional, scope of delivery as shown in the photos. Hjdei Eb U Aopfx Airsw

Condition: used, Year of construction: 2017, ++ without ST package ++ can be purchased separately CNC-CONTROLLED MACHINING CENTER KEY FEATURES "PRO-SPACE" SAFETY DEVICES: SAFE AND COMPACT "HE" TABLE - FOCUS: EFFICIENCY AND SAVINGS TECHNICAL DATA AXES Pratix S22 Working area in X-Y-Z axis * mm 22-43 = 4286-2155-150 Travel X-Y-Z axes mm 22-43 = 4970-2585-250 Travel speed of X-Y axes m/min 35 WORK TABLE Type Multifunction table made of aluminum Stops for "A" working area pcs 4 Vacuum pump (Opt.) m³/h 90/108 - 250/300 DRILLING UNIT Vertical spindles No. – rpm 7 (5X-3Y) 6,000 – 12 (8X-5Y) 6000 Horizontal spindles (Opt.) No. – rpm 4 (2X-2Y) 6,000 – 6 (4X-2Y) 6000 Integrated saw blade in X (Opt.) Ø mm – rpm 120 – 7500 Motor power kW (HP) 2.2 (3) Hodpfx Aiez Ebzhsrew ELECTROSPINDLE Motor power Std. (S6) kW (HP) 6.6 (9) – 9.5 (13) Max. speed rpm 24000 Side tool changer 13 positions INSTALLATION Installed power kVA 23÷28,5 Compressed air requirement l/min 400 Extraction air requirement m³/h 5300 Extraction air speed m/sec 30 Extraction nozzle diameter (electrospindle + drilling unit + kit) mm 250 Machine weight kg 22-43 = 3200 * X Distance between stops - Y Max. panel width - Z Workpiece passage Only electrospindle or electrospindle + drilling unit: diameter 200 mm; extraction air requirement 3400 m³/h In conjunction with the slider for panel output, the extraction nozzle diameter is always = 250 mm GENERAL FEATURES CNC-controlled machining center for processing panel materials. Self-supporting structure and work table Box structure made of cold-rolled steel, consisting of rectangular sections that are welded together; multifunction work table made of aluminum with a single working area. Holes in a 120 mm grid for vacuum connection, can be easily removed using a magnetic device (patented system). The entire surface is grooved at a distance of 20 mm so that the workpieces can be clamped using rubber seals, MODULSET or suction cups. Automatically retractable reference stops that ensure accurate positioning of the workpieces to be processed. Moving gantry This is a gantry structure made of cold-rolled steel in a box design, consisting of right-angled sections. The working units are installed on the gantry. Working unit consisting of a drilling head with vertical spindles, horizontal spindles, an integrated grooving and sawing unit and an SCM electrospindle with a tool quick-change system type HSK63F. Travel paths of the gantry and the unit carrier The movement in the X, Y and Z axis takes place on linear prismatic recirculating ball guides with the help of pre-tensioned Movement transmission of the X and Y axes (moving column and carriage) takes place via a reduction gearbox with rack and pinion drive and oblique The movement of the unit carrier in the Z direction takes place via pre-tensioned Positioning of the working units and control of the machine functions takes place via "Brushless" three-phase servomotors and digital CONTROL The control unit consists of a numerical control for milling and drilling machines and a user interface with remote control with a 7" touchscreen color screen. The Xilog Maestro machine operating interface offers optimal communication between operator and the machine for all programming functions.

Condition: refurbished (used), Year of construction: 2005, travel distance X-axis: 1,050 mm, travel distance Y-axis: 2,050 mm, travel distance Z-axis: 1,000 mm, workpiece weight (max.): 20,000 kg, table width: 1,140 mm, table length: 1,640 mm, workpiece length (max.): 2,520 mm, workpiece width (max.): 1,520 mm, workpiece height (max.): 945 mm, feed rate Z-axis: 12 m/min, overall weight: 30,000 kg, table load: 20,000 kg, # OPS INGERSOLL GANTRY 1500 / 64 Bit ## Fully Refurbished – Completion Expected 10/2026 For sale is an OPS INGERSOLL wire EDM machine, model GANTRY 1500 / 64 Bit, manufactured in 2005, which is undergoing a comprehensive and professional overhaul in our facility. Upon completion of the overhaul, the machine will be in very good condition, both technically and aesthetically, and will be prepared for immediate use in reliable production operations. ### Technical Data Manufacturer: OPS INGERSOLL Model: GANTRY 1500 / 64 Bit Year of Manufacture: 2005 Condition: Fully Refurbished Completion: Expected 10/2026 Control: Mitsubishi – 64-bit CNC Generator Power: 70 A – Multipulse Travel Ranges X / Y / Z: 1,050 × 2,000 × 1,000 mm Electrode Changer: 15-position pick-up disc changer Working Tank (W × D × H): 1,520 × 2,520 × 945 mm Workpiece Clamping Table (W × D): 1,380 × 2,380 mm Load Capacity: 20,000 kg ### Accessories * CO₂ fire extinguishing system * Cartridge filter system ## Extensive Overhaul The OPS INGERSOLL GANTRY 1500 is undergoing a comprehensive and professional overhaul in our facility. During the overhaul, the machine will be disassembled to over 70%. All relevant components and wear parts will be carefully inspected and, if necessary, professionally refurbished or replaced. ### The following overhaul work will be carried out: * Inspection and, if necessary, replacement of the ball screws and ball bearings of the X, Y, and Z axes * Inspection and, if necessary, replacement of all four ball screws of the tank drive * Inspection and testing of the C-axis for tightness and accuracy * Geometric inspection of all axes according to the OPS INGERSOLL test protocol * Thorough cleaning of the entire machine base * Cleaning of the entire working tank, including replacement of the felt wipers * Overhaul of the dielectric pumps * Replacement of all hydraulic and dielectric lines * Replacement of all pneumatic lines * Thorough cleaning of the control cabinet, generator, and control system * Replacement of all relevant fans and batteries * Overhaul or, if necessary, replacement of power supplies, units, and servo amplifiers Hedjz Atdrspfx Airow * Final laser measurement of the machine after the overhaul ## Quality Control and Erosion Test After completion of all overhaul work, the machine will undergo a comprehensive functional and quality control. This includes, in particular, a detailed erosion test according to the quality and testing specifications of OPS INGERSOLL. The relevant machine functions, as well as accuracy and process reliability, will be checked. ## Ready for Production After Overhaul After successful completion of the overhaul and final inspection, the OPS INGERSOLL GANTRY 1500 / 64 Bit is immediately ready for use. With its high load capacity of 20,000 kg, the generous travel ranges, and the large working area, the machine is particularly suitable for the reliable machining of large and heavy workpieces in demanding production environments. A powerful and comprehensively refurbished wire EDM machine for users who value high machine quality, process reliability, and long-term operational capability. 10/16.

Condition: used, Year of construction: 2002, 2002 Friulmac DUALFEED Cutter - Loader for hydraulic, automatic shearer, with electronic size adjustment. The Dualfeed machine consists of two heads connected by a welded steel frame, on which two support shafts for pallets are fixed. One of the support pallets is fixed while the other is movable to allow opening of the head placed on the action of the hydraulic fluid and centraining On the pallets they find space at the entrance, the parts warehouse for automatic loading handling hydraulics. pieces to be machined, then the workpiece feed system, the work groups and the press group, finally at the output, the hauling group assigned to the entry of pieces to the scorniciatrice. The purpose of the machine is to continuously feed the chipping machine with pieces cut to the required size of the woodworking material, as specified in the technical specification. The operating cycle takes place in two distinct phases: - in the first phase the piece is automatically retrieved from the warehouse where the operator previously performed the loading operation and the transit is passed through two sawing blades that cut it to the adjusted length. - In the second phase the piece header is always automatically moved to the pre-feeder of the scorner where two dedicated feed rollers insert it into the Hsdpfx Aiozxg Ddsrew - just shearer. The loading speed automatically adjusts to the pull speed of the palm framer and the machine operation stops automatically if for any reason the palm framer's pull stops. The piece advancement is performed by pushers mounted on a movable bar that has an alternating (forward-backward) movement. At the end of the work cycle the piece exits the machine with the same pusher system and is deposited on the stripper conveyor bed where two feed rollers insert it into the stripping machine. The alternating motion of the mobile bar that carries the pushers is hydraulically obtained from a rotary actuator and the two traction rollers are driven by a hydraulic motor. Minimum piece length: mm. 260 Maximum piece length: mm. 1300 Minimum piece width: mm. 40 Maximum piece width: mm. 110 Minimum thickness: mm. 10 Maximum thickness: mm. 80

Condition: used, mileage: 7,700 km, power: 120 kW (163.15 HP), color: white, gearing type: automatic, Equipment: ABS, air conditioning, central locking, power assisted steering, - Tel: , Mr. Kiel will be happy to assist you. To ensure you receive the best possible advice, we kindly request that you schedule an appointment. B25 Parking brake, electric, BA3 Active Brake Assist, BH1 HOLD function, C6L Multifunction steering wheel, CF0 Basic chassis, CL1 Steering wheel adjustable in inclination and height, CM2 Bumpers and trim painted in vehicle color, D50 Fixed partition, E07 Hill-start assist, E1D DIGITAL RADIO (DAB), E4S Smartphone Integration Package, E7B DIGITAL EXTRA: PREPARATION FOR NAVIGATION, E7M MBUX Multimedia System, ED4 Fleece battery 12 V 92 Ah, EL8 2-way front speakers, EW6 DIGITAL EXTRA: REMOTE SERVICES PLUS, EY5 Mercedes-Benz emergency call system, EY6 Breakdown assistance, F3Z Comfort closing, F64 Electrically foldable exterior mirrors, F66 Lockable glove compartment, F68 Heated and electrically adjustable exterior mirrors, FY7 Multi-button remote control, G43 9G-TRONIC, H16 Seat heating for driver, H20 Heat-insulating glass all around, HH9 SEMI-AUTOMATICALLY CONTROLLED CLIMATE CONTROL SYSTEM TEMPMATIC, IN2 Wheelbase 3200 mm, long overhang, J2W Maintenance interval 2 years, J55 Seatbelt warning for passenger seat, JA7 Blind Spot Assist, JB4 Active Lane Keeping Assist, JB7 Parking package with reversing camera, JH3 Communication module (LTE) for digital services, JK5 Instrument cluster with color display, JS2 Intelligent Speed Assist, JW8 ATTENTION ASSIST, JX2 Maintenance interval 40,000 km, KB5 Main tank 70 liters, L45 MULTIBEAM LED with high beam assist PLUS, LA2 Headlamp assist, LC2 LED light strip in the cargo area, LE1 Adaptive brake light, LG4 Tail, brake and turn signal lights in LED technology, M60 Generator 14 V / 250 A, M6B EMISSION CLASS EURO 6E-BIS N1, M72 Vehicle HVO compatible, MG9 Generator management, MJ8 ECO Start-Stop function, MK8 Speed limiter 210 km/h, MS1 Cruise control, MU4 OM 654 DE 20 LA 120 kW (163 hp) 3800/min, MX0 BlueEFFICIENCY package, Q22 Trailer coupling, ball head, fixed, QA4 Trailer load 2500 kg, RY2 Tire pressure monitoring on front and rear axle, wireless, S23 Passenger seat, single seat, SA1 Driver's seat cushion depth adjustment, SA6 Airbag passenger, SB1 Comfort driver's seat, SE5 Lumbar support, driver's seat, SK2 Seat occupancy recognition, driver's seat, V43 Wood flooring, VA2 Interior lining, cargo area up to roof height (wood), VF4 Fabric Caluma black, VV9 Load securing rail system, VV9 Attachment points in the roof frame, W65 Tailgate We will gladly provide you with an offer for the trade-in of your used vehicle. If you would like to lease or finance your vehicle, we will be happy to provide you with an individual offer. Mr. Kiel will be happy to assist you. IMPORTANT: Inspection only after prior arrangement! All information without guarantee, errors and prior sale reserved! Images are for illustrative purposes only! Deviations from advertisements or other descriptions are possible, for example, due to errors, incorrect data, transmission errors! ESP, particulate filter, new MOT, partition, navigation preparation Hsdpfx Ao Af Enroirow = Further information = Year of manufacture: 2025 Engine displacement: 1,950 cc GVW: 2,800 kg Please contact Tobias Ebert for more information.

Condition: new, functionality: fully functional, power: 18.5 kW (25.15 HP), gearing type: hydrostat, fuel type: diesel, fuel tank capacity: 45 l, color: red, overall weight: 1,500 kg, empty load weight: 1,500 kg, lifting height: 2,472 mm, tire size: 26X12.00-12, number of seats: 1, Year of construction: 2025, load capacity: 700 kg, Equipment: additional headlights, all wheel drive, hydraulics, standard shovel, trailer coupling, The H&R 1507 compact loader is our smallest farm loader – perfectly suited for confined working environments. With a lifting capacity of 700 kg, the H&R 1507 wheel loader can lift loads up to 700 kg to a height of 2.47 m. Thanks to the standard wide tires, it offers excellent stability and safety. The new 3-cylinder Perkins engine (Mannheim, Germany) meets the Euro 5 standard without a particulate filter and is particularly efficient. With its 2-stage hydrostatic drive, the 1507 loader reaches a speed of 12 km/h and provides comfortable operation. The additional 3rd and 4th hydraulic control circuits allow the use of various attachments. The hydraulic quick coupler enables fast and convenient changing of front-mounted implements. H&R loaders are technically and visually optimized in-house and undergo thorough testing. In addition, each machine receives extensive rust protection treatment. Our loaders comply with CE standards according to the EU Machinery Directive. For our machines, a TÜV Süd report is available for obtaining individual operating permits in accordance with §21 StVZO (road approval / operating permit as a self-propelled working machine). Key features of the H&R 1507: • Technical and visual optimization in-house • Efficient engine from Germany • Ideal for confined working environments • Incl. standard bucket 120cm • Hydraulic quick coupler • Joystick control with float position • Electric gear on the joystick • Auxiliary hydraulics for front implements, 3rd and 4th control circuits • Hydraulic oil cooler • Brake inch pedal • Open cab and safety frame with removable protective roof • Rotating beacon • LED work lights, front and rear • Wide tires 26 x 12.00 - 12 • Adjustable steering column and seat Hsdpfx Ajuqu Sgjirow • Hour meter and fuel gauge • Ball-type trailer hitch • CE compliant (EU Machinery Directive) • 1-year spare parts warranty Price Net: €15,880.00 VAT: €3,017.00 Gross: €18,897.00 Financing possible! Optional: Road approval possible Delivery possible Technical data: Lifting capacity: 700 kg Lifting height: 2472 mm (bottom edge of standard pallet fork) Discharge height: 1915 mm (standard bucket tipped) Lifting time / Lowering time: 4.0 / 3.5 seconds Engine: 3-cylinder Perkins Power: 25 hp Emission class: Euro 5 Drive: Hydrostatic (PWG) All-wheel drive speed: 12 km/h Tires: 26 x 12.00 - 12 Dimensions: 2860 x 1160 x 2247 mm Weight: 1600 kg Accessories and spare parts are available from us. Please provide your telephone number when making inquiries! Overall height: 2247 mm (2.247 m). Maximum speed: 12 km/h.

Condition: new, pressure 320 t chamfer lenght 3100 mm distance between columns 2600 mm work stroke 310 mm dayligth 525 mm column arm 510 mm ram stroke speed 140 mm/sec work speed 8.0 mm/sec return speed 130 mm/sec table height 900 mm oil volume 290 ltr. voltage 400 Volt weight 16500 kg range L-W-H 4550 x 2450 x 3200 mm ----- CNC "C" SERIES electro-hydraulic press brake featuring: * Increased daylight (open height) * Extended cylinder stroke * Increased throat depth * Long-type "full machine cover" ----- Equipment: - DELEM CNC control, model "DA-69T," with touchscreen/graphics * 2D and 3D graphical programming via touchscreen * Three-dimensional visualization, including a representation of the machine . during simulation and production * 24-inch high-resolution TFT color display * Compatibility with the Delem "Modusys" system for flexible expansion and . customization of control modules * USB port and interfaces for external peripheral devices * Support for custom, application-specific software . * Control system with multitasking environment * Interface for sensor-supported bending and automatic corrections * Profile-S3D offline programming software * Swiveling touchscreen control unit, positioned at the front left - CNC-controlled axes: Y1, Y2, X, R, Z1, and Z2, plus CNC-controlled crowning - CNC-controlled, motorized backgauge * Travel range: X-axis 750 mm // R-axis 250 mm * Travel speed: X-axis 500-600 mm/s // R-axis 200 mm/s * Equipped with recirculating ball screws * CNC-controlled, motorized backgauge fingers (Z1 + Z2) - Sectionalized "gooseneck" (swan-neck) upper tool: ROLLERI 135.85.R08, "System A" * Includes quick-change clamping system * Includes integrated crowning system within the tool holder - Sectionalized 4-V universal die (60x60 mm) - Rear safety system: light curtain - BOSCH/HOERBIGER hydraulic components Hedpfx Aie Afzvfersw - SIEMENS electrical components - FIESSLER AKAS laser safety system at the front of the machine (including FMSC) - 2x front support arms with a sliding system (HIWIN linear bearings) - 1x mobile dual-pedal foot control - CE marking / Declaration of Conformity - Operating manual, including electrical and hydraulic schematics * Image shows a machine of nearly identical design

Condition: new, functionality: fully functional, power: 44.87 kW (61.01 HP), gearing type: automatic, fuel type: diesel, fuel tank capacity: 55 l, color: red, overall weight: 4,220 kg, lifting power: 1,800 kg/m, lifting height: 2,784 mm, tire condition: 100 %, axle configuration: 2 axles, number of seats: 1, emission class: euro5, digging bucket width: 1,900 mm, Year of construction: 2025, load capacity: 1,800 kg, machine/vehicle number: H&R 3518, Equipment: additional headlights, all wheel drive, cabin, hydraulics, pallet forks, soot filter, standard shovel, trailer coupling, H&R Loader 3518 – The versatile farm loader for demanding tasks Advantages of the H&R 3518 Wheel Loader Powerful engine: Yunnei common-rail diesel engine with Bosch injectors and Bosch control system, 45 kW / 61 hp. Exhaust turbocharger with charge air cooling for improved responsiveness in the lower speed range. Euro-5 emissions standard with particulate filter, without AdBlue. Easy operation: The 2-stage torque converter and all-wheel drive enable easy handling, even with heavy loads and difficult ground conditions. Compact design, high maneuverability: Despite its size and a high dead weight and lifting capacity, the H&R wheel loader is relatively maneuverable. Hydraulic quick coupler: With the hydraulic quick coupler, you can quickly and easily switch between different attachments. Expandable functions: Use the 3rd and 4th hydraulic circuits to operate additional attachments such as mowers, bale grabbers, snowplows, and more. Comfortable cab for all-day use: The H&R wheel loader offers a spacious cab with an adjustable seat, diesel-powered auxiliary heater, and reversing camera, as well as heating and ventilation, and a radio with MP3 and USB. This allows you to carry out even longer tasks comfortably and safely. H&R loaders are technically and visually optimized and thoroughly tested in-house. In addition, each machine receives extensive rust protection treatment. Our wheel loaders comply with CE standards according to the EU Machinery Directive. For our machine, there is a TÜV Süd expert opinion for obtaining individual operating permission in accordance with §21 StVZO (road approval / operating permit as a self-propelled working machine). Important features of the H&R 3518 farm loader • Fully equipped • Extensively optimized in Germany • Powerful and robust - versatile • Compact design ensures high maneuverability despite its size • Comfortable cab with heating and ventilation as well as a diesel-powered auxiliary heater • Joystick with electric gear shifting for precise control • Additional 3rd and 4th control circuits for attachments • Reversing camera with display • LED work lights and windshield wipers for clear visibility in all weather conditions • MP3 radio and USB connection for entertainment while working • Ball-type trailer coupling with socket for use with trailers Hedpfx Aioul Ab Serow • Coolant preheating 220V for reliable cold-starting capability and increased engine life. • Hour meter to monitor operating times and maintenance intervals • Extensive rust protection treatment • CE compliant according to EU Machinery Directive • Incl. 1 year spare parts warranty Price Net: €24,590.00 VAT: €4,672.10 Gross: €29,262.10 Financing possible! Optional Road approval / operating permit: €480 Extended warranty (2 years): €590 Transport Germany and Austria: On request Technical details Engine: 4-cylinder Yunnei Engine power: 45 kW / 61 hp Emission class: Euro 5 Lifting height: 2784 mm (bottom edge of standard pallet fork) Discharge height: 2279 mm (standard bucket tilted) Lifting capacity: 1800 kg Wheelbase: 2280 mm Tires: 20.5-70 R17.5 Dimensions: 4050 x 1870 x 2570 mm Weight: 3850 kg Accessories and spare parts are available from us. Please provide your telephone number when making inquiries.

Condition: new, sheet width 3050 mm plate thickness 13.0 mm thickness at "Niro-steel" 8.0 mm down holder 16 Stück no. of strokes 9 - 17 Hub/min cutting angle 0.5 - 2.5 ° throat 150 mm table height 830 mm oil volume 250 ltr. weight of the machine ca. 11.000 kg range L-W-H 4150 x 2350 x 2450 mm ----- Robust electro-hydraulic CNC guillotine shear with "swing-beam" * Includes CYBELEC CNC touch-screen control system * Includes CNC electro-hydraulic blade-gap adjustment * Includes CNC electro-hydraulic cutting-angle adjustment ----- Equipment: - CNC electro-hydraulic guillotine shear with "swing-beam" - Includes CYBELEC CNC touch-screen controller, model "CybTouch 8" - Selected CNC control functions: * Backgauge positioning (X-axis) * Blade-gap adjustment * Piece counting * Cutting-length limitation * Material selection (including sheet thickness) * Cutting-line illumination (for cutting to a scribed line) ... and many more - Motorized backgauge, travel range = 5.0 – 1,000 mm (X-axis) * Mounted on recirculating ball screws * Automatically retracts/swings up at maximum travel to Hedpfx Aie Afzu Ijrew . accommodate longer workpieces * Includes selectable "swing-away" (retraction) function * Positioning accuracy: 0.1 mm * Travel speed: approx. 80 mm/sec. - 1x side gauge, with T-slot and mm scale - 2x front support arms, with T-slot and mm scale - Ball transfers in the front support table - Hinged finger guard with safety switch * Finger guard with viewing windows for cutting along a scribed line - Cutting line illumination (shadow line) - BOSCH/HOERBIGER hydraulic system - SIEMENS electrical system - Light curtain behind the machine (safety device) - Movable foot switch - CE mark / Declaration of Conformity - Operating manual + circuit diagram + hydraulic schematic * Image shows an identical model

Condition: new, sheet width 3050 mm plate thickness 6.0 mm thickness at "Niro-steel" 4.0 mm down holder 16 Stück no. of strokes 10 - 19 Hub/min cutting angle 0.5 - 2.0 ° throat 150 mm table height 830 mm oil volume 140 ltr. weight of the machine ca. 8.000 kg range L-W-H 4150 x 2250 x 1900 mm Hedpfx Aij Afzvrorsw ----- Robust electro-hydraulic CNC guillotine shear with "swing-beam" * Includes CYBELEC CNC touch-screen control system * Includes CNC electro-hydraulic blade-gap adjustment * Includes CNC electro-hydraulic cutting-angle adjustment ----- Equipment: - CNC electro-hydraulic guillotine shear with "swing-beam" - Includes CYBELEC CNC touch-screen controller, model "CybTouch 8" - Selected CNC control functions: * Backgauge positioning (X-axis) * Blade-gap adjustment + cutting-angle adjustment * Piece counting * Cutting-length limitation * Material selection (including sheet thickness) * Cutting-line illumination (for cutting to a scribed line) ... and many more - Motorized backgauge, travel range = 5.0 – 1,000 mm (X-axis) * Mounted on recirculating ball screws * Automatically retracts/swings up at maximum travel distance . to accommodate longer workpieces * Includes selectable "swing-away" (retraction) function * Positioning accuracy: 0.1 mm * Travel speed: approx. 80.0 mm/sec. - 1x side gauge, with T-slot and mm scale - 2x front support arms, with T-slot and mm scale - Ball transfers in the front support table - Hinged finger guard, with safety switch * Finger guard with viewing windows for cutting to a scribed line - Cutting line illumination (shadow line) - BOSCH/HOERBIGER hydraulic system - SIEMENS electrical system - Light curtain behind the machine (safety device) - 1x mobile foot switch - CE mark / Declaration of Conformity - Operating manual + circuit diagram + hydraulic schematic * Special accessories included: - Pneumatic sheet support device for cutting thin metal sheets * Image shows a machine of a similar design

Condition: new, functionality: fully functional, power: 18.5 kW (25.15 HP), gearing type: hydrostat, fuel type: diesel, fuel tank capacity: 45 l, color: red, overall weight: 1,700 kg, empty load weight: 1,600 kg, lifting power: 800 kg/m, lifting height: 2,470 mm, tire size: 12, tire condition: 100 %, axle configuration: 2 axles, number of seats: 1, emission class: euro5, shovel volume: 0.4 m³, digging bucket width: 1,200 mm, Year of construction: 2025, load capacity: 700 kg, Equipment: additional headlights, all wheel drive, cabin, head guard, hydraulics, pallet forks, standard shovel, trailer coupling, Current model designation: H&R 1507 with cabin. Previous model designation (search alias): H&R 1607. Design: enclosed cabin with heating and windshield wiper. The H&R 1507 with cabin wheel loader is our smallest loader with a cabin. It is exceptionally maneuverable and can be used wherever space is limited. With a lifting capacity of 700 kg, the H&R 1507 with cabin wheel loader lifts loads up to 700 kg to a height of 2.47 m. Thanks to the standard wide tires, it is very stable and safe. The new 3-cylinder Perkins engine (Mannheim, Germany) meets the Euro 5 standard, even without a particulate filter, and is particularly efficient. With the 2-stage hydrostatic drive, the 1507 with cabin loader reaches a speed of 12 km/h and is comfortable to drive. The additional 3rd and 4th hydraulic control circuits allow the use of various attachments. The hydraulic quick coupler allows for quick and convenient changing of front-mounted implements. H&R wheel loaders are technically and visually optimized in-house, so they differ significantly in quality from the competition. Key features of the H&R 1507 with cabin compact loader • Fully equipped • extensively optimized in Germany • ideal for confined working environments • incl. standard bucket 120cm • Enclosed cabin with heating, windshield wiper, ventilation, and radio (USB/MP3) • hydraulic quick coupler • Joystick control with floating position • Electric gear on the joystick • Rear view camera with display • Brake inch pedal • Auxiliary hydraulics for front-mounted implements, 3rd and 4th control circuit • Hydraulic oil cooler • Rotating beacon • LED work lights front + rear • Wide tires 26 x 12.00 - 12 • Adjustable steering column and seat • Hour meter and fuel gauge • Trailer hitch, ball hitch • CE compliant according to EU Machinery Directive • 1 year spare parts warranty Price Net: €17,610.00 VAT: €3,345.90 Gross: €20,955.90 Optional Transport DE/AT possible. Road approval possible. Financing possible. Technical data Lifting capacity: 700 kg Lifting height: 2.47 m (bottom edge of standard pallet fork) Lifting time / Lowering time: 4.0 / 3.5 sec. Engine: 3-cylinder Perkins Turbo Power: 25 hp Emission class: Euro 5 Drive: Hydrostatic (PWG) All-wheel speed: 12 km/h Dimensions: 2860 x 1160 x 2247 mm Weight: 1600 kg Tires: 26 x 12.00 - 12 Hjdpfsupz T Isx Airow Accessories and spare parts are available from us. Overall height: 2247 mm (2.247 m). Maximum speed: 12 km/h.

Condition: good (used), Polar Mohr 115 XT Plus Paper Guillotine This machine is in very good condition, ready for production, and has been serviced. Low mileage. Year of manufacture: 2011. This is the most valued guillotine brand, a flagship product. Technical specifications: Cutting width: 1150mm Stack height: 165mm Programmer with 18.5″ color touchscreen display Air table Photocells Chrome table surface Hodpfx Ao Af E Huoirsw Ball screw drive for the rear comb Optical cutting line Enlarged side tables Knife change via the control panel Additional rear table guards Weight: 3200kg 380V power supply Includes documentation, a tool kit, a tapping block, a spare knife, and one knife in the machine.