Used Ball Header for sale (3,298)

Condition: new, Year of construction: 2025, HEBROCK Edge Bander F2 next with SPS control system (incl. touchscreen) and hot-melt glue application to the workpiece for edge material up to 3 mm: pre-milling unit (incl. DIA tool) up to 2 mm milling depth, maintenance-free glue pot with preparation for interchangeable tank incl. glue discharge device, HF cross-cut saw station (approx. 12,000 rpm), HF milling station (approx. 12,000 rpm) with separate pneumatic milling adjustment and indexable insert cutter head (combi version), robust chain drive, double roller upper pressure with ball bearings, inspection window on the rear of the machine, extendable workpiece support, feed rate approx. 10 m/min. Including: F2/500/10 Whispercut pre-milling head Ksdewmdbrjpfx Afdenb F2/500/20 Combination milling head F2/500/2 Radius cutter R=2mm F2/12 Surface scraper (incl. pneumatic lift)

Condition: used, Year of construction: 2005, operating hours: 11,100 h, travel distance X-axis: 500 mm, travel distance Y-axis: 450 mm, travel distance Z-axis: 380 mm, controller manufacturer: Heidenhain, controller model: Heidenhain TNC 530, table load: 300 kg, rotary table diameter: 630 mm, overall weight: 4,500 kg, spindle speed (max.): 10,000 rpm, number of slots in tool magazine: 16, Equipment: chip conveyor, documentation/manual, The machine is still in operation and can be tested while powered. Available from approximately December 2026. At approximately 10,000 spindle operating hours, the spindle was re-bearinged, and the ball screws in the X, Y, and Z axes were replaced. Includes Heidenhain probe. Tool holder: SK 40. The zero-point clamping plate shown on the table will be removed and is not included in the sale. Kedpfx Afoz Damtedenb

Condition: refurbished (used), Year of construction: 2005, travel distance X-axis: 1,050 mm, travel distance Y-axis: 2,050 mm, travel distance Z-axis: 1,000 mm, workpiece weight (max.): 20,000 kg, table width: 1,140 mm, table length: 1,640 mm, workpiece length (max.): 2,520 mm, workpiece width (max.): 1,520 mm, workpiece height (max.): 945 mm, feed rate Z-axis: 12 m/min, overall weight: 30,000 kg, table load: 20,000 kg, # OPS INGERSOLL GANTRY 1500 / 64 Bit ## Completely Overhauled – Completion Expected 10/2026 For sale is an OPS INGERSOLL wire EDM machine, model GANTRY 1500 / 64 Bit, manufactured in 2005. This machine will undergo a comprehensive and professional overhaul in our facility. Upon completion of the overhaul, the machine will be in very good technical and optical condition and will be ready for immediate use in reliable production operations. Ksdpfxoz Atdrj Afdsnb ### Technical Data Manufacturer: OPS INGERSOLL Model: GANTRY 1500 / 64 Bit Year of Manufacture: 2005 Condition: Completely Overhauled Completion: Expected 10/2026 Control: Mitsubishi – 64-bit CNC Generator Power: 70 A – Multipulse Travel Ranges X / Y / Z: 1,050 × 2,000 × 1,000 mm Electrode Changer: 15-position pick-up disc changer Work Tank (W × D × H): 1,520 × 2,520 × 945 mm Workpiece Clamping Table (W × D): 1,380 × 2,380 mm Load Capacity: 20,000 kg ### Accessories * CO₂ fire extinguishing system * Cartridge filter system ## Extensive Overhaul The OPS INGERSOLL GANTRY 1500 will undergo a comprehensive and professional overhaul in our facility. As part of the overhaul, the machine will be disassembled to over 70%. All relevant components and wear parts will be carefully inspected and, if necessary, professionally repaired or replaced. ### The following overhaul work will be carried out: * Inspection and, if necessary, replacement of the ball screws and ball bearings of the X, Y, and Z axes * Inspection and, if necessary, replacement of all four ball screws of the tank drive * Inspection and testing of the C-axis for tightness and accuracy * Geometric inspection of all axes according to the OPS INGERSOLL test protocol * Thorough cleaning of the entire machine base * Cleaning of the entire work tank, including replacement of the felt wipers * Overhaul of the dielectric pumps * Replacement of all hydraulic and dielectric lines * Replacement of all pneumatic lines * Thorough cleaning of the control cabinet, generator, and control system * Replacement of all relevant fans and batteries * Overhaul or, if necessary, replacement of power supplies, units, and servo amplifiers * Final laser measurement of the machine after the overhaul is completed ## Quality Inspection and Erosion Test After completion of all overhaul work, the machine will undergo a comprehensive functional and quality inspection. This includes, in particular, a detailed erosion test according to the quality and testing requirements of OPS INGERSOLL. This test will verify the relevant machine functions as well as the accuracy and process reliability. ## Ready for Production After Overhaul After successful completion of the overhaul and final inspection, the OPS INGERSOLL GANTRY 1500 / 64 Bit will be immediately ready for use. With its high load capacity of 20,000 kg, the generous travel ranges, and the large work area, this machine is particularly suitable for the reliable machining of large and heavy workpieces in demanding production environments. A powerful and comprehensively overhauled wire EDM machine for users who value high machine quality, process reliability, and long-term operational capability.

Condition: ready for operation (used), Year of construction: 2006, operating hours: 38,407 h, spindle speed (max.): 5,000 rpm, travel distance X-axis: 300 mm, travel distance Z-axis: 650 mm, spindle motor power: 26,000 W, total height: 2,900 mm, total width: 2,500 mm, overall weight: 12,000 kg, controller manufacturer: SIEMENS, controller model: 840 Powerline, product length (max.): 7,855 mm, number of slots in tool magazine: 24, number of axes: 3, This 9-axis Gildemeister TWIN 65 was manufactured in 2006. It features a spindle power of 65 kVA and a maximum spindle speed of 5000 rpm. The machine includes a tool magazine with 24 tools and a turret-type tool changer. With a robust weight of 12,000 kg and dimensions of 7855 mm x 2500 mm x 2900 mm, this horizontal turning machine is equipped with special features like a touch probe and internal coolant supply. If you are looking to get high-quality turning capabilities, consider the Gildemeister TWIN 65 machine we have for sale. Contact us for further details. • 2 units available, identical machine • Machine design: 60° slant bed Knsdpfsyvz Ibex Afdob • Guideways: Roller guideways • Max turning diameter: 250 mm • Max turning diameter (standard): 120 mm • Max turning length: 900 mm • X1 travel (upper slide): 300 mm • Z1 travel (upper slide): 650 mm • Y1 travel (optional): ±40 mm • X2 travel (lower slide): 180 mm • Z2 travel (lower slide): 650 mm • X3 travel (counter spindle): 175 mm • Z3 travel (counter spindle): 670 mm • Main spindle chuck size: 175 / 200 mm • Maximum rod diameter (without reducing tubes): 62 / 65 mm • Spindle bore diameter: 79 mm • Spindle nose diameter: 170 mm • Collet diameter: 66 mm • Front bearing diameter: 120 mm • Main spindle power (40/100% ED): 35 / 25 kW • Main spindle speed range: up to 5000 rpm • Main spindle torque (40/100% ED): 370 / 270 Nm • Spindle drive type: AC motor with integrated spindle motor • C-axis: Integrated for oriented stopping and contouring • C-axis speed: 2000 rpm • C-axis holding torque: 270 Nm • Counter spindle power (40/100% ED): 26 / 21 kW • Counter spindle speed range: up to 5000 rpm • Counter spindle torque (40/100% ED): 290 / 230 Nm • C-axis (counter spindle) speed: 2000 rpm • C-axis (counter spindle) holding torque: 230 Nm • Rapid traverse X/Z (slide 1): 30 / 30 m/min • Feed force X/Z (slide 1): 4.0 / 7.0 kN • Positioning resolution X/Z: 0.0005 mm • Motor torque X/Z: 6 / 10.5 Nm • Motor speed X/Z: 3000 rpm • Ball screw pitch X/Z: 20x32 / 20x40 mm • Rapid traverse X/Y/Z (with Y-axis): 30 / 15 / 30 m/min • Feed force X/Y/Z: 4.0 / 4.0 / 7.0 kN • Positioning resolution X/Y/Z: 0.0005 mm • Motor torque X/Y/Z: 6 / 6 / 10.5 Nm • Motor speed X/Y/Z: 3000 rpm • Ball screw pitch X/Y/Z: 20x32 / 10x32 / 20x40 mm • Rapid traverse X/Z (slide 2): 30 / 30 m/min • Feed force X/Z (slide 2): 4.0 / 7.0 kN • Positioning resolution X/Z (slide 2): 0.0005 mm • Motor torque X/Z (slide 2): 6 / 10.5 Nm • Motor speed X/Z (slide 2): 3000 rpm • Ball screw pitch X/Z (slide 2): 20x32 / 20x40 mm • Rapid traverse X/Z (counter spindle slide): 15 / 30 m/min • Feed force X/Z (counter spindle slide): 4.0 / 7.0 kN • Positioning resolution X/Z (counter spindle): 0.0005 mm • Motor torque X/Z (counter spindle): 10.5 / 10.5 Nm • Motor speed X/Z (counter spindle): 3000 rpm • Ball screw pitch X/Z (counter spindle): 10x32 / 20x40 mm • Number of tool stations: 12 • Tool holder: VDI 30 • Tool changer type: Turret • Tool shank size (DIN 69880): 30 / 40 mm • Number of driven tool stations: 12 • Driven tools: all 12 stations capable of driven tools • Driven tool power (40/100% ED): 11.7 / 8.4 kW • Driven tool torque (40/100% ED): 28 / 20 Nm • Driven tool speed: up to 4000 rpm • Tailstock stroke (optional): 300 mm • Tailstock force: 150 / 630 daN • Center size: MK 4 • Hydraulic tank capacity: 20 l • Hydraulic pump power: 2.2 kW • Hydraulic pressure max: 90 bar • Clamping pressure main spindle: 80 bar • Clamping pressure counter spindle: 70 bar

Condition: like new (used), Year of construction: 2020, operating hours: 5,600 h, functionality: fully functional, machine/vehicle number: 0-250-77-3262, 1. BASIC MACHINE - rigid steel frame construction - 2 workpiece clamping devices with integrated stop system - Separate adjustment of the clamping devices via rack and pinion gear in X-direction - Digital AC servomotors - The position of the clamping devices at the workpiece is program-controlled - Adjustment of the clamping devices between the separate processing steps in the processing area is possible. - Automatic measuring of the workpiece thickness and lengths by the clamps and the stop system - Blowing nozzle for safe removal of residual parts off the clamps 1.1 LOWER PROCESSING SUPPORT - Rigid aluminium cast construction - Integrated threefold divided table with selectable air cushion - Lateral stop system - Adjustment of the axes in Y- and Z-direction Knodpfoz Df Txjx Afdjb - Ball bearing spindle (Z-direction) and rack and pinion gear (Y-direction) - Digital AC servomotors - Suitable for fitting of various configurations 1.2 UPPER PROCESSING SUPPORT - Rigid aluminium cast construction - Integrated threefold divided pressure beam with selectable air cushion - Adjustment of the axes in Y- and Z-direction - Ball bearing spindle (Z-direction) and rack and pinion gear (Y-direction) - Digital AC servomotors - Suitable for fitting of various configurations 1.3 WORKPIECE DIMENSIONS workpiece length: min. 200 mm workpiece length: max. 2500 mm workpiece width: min. 70 mm workpiece width: max. 1000 mm - with restrictions in processing: 1300 mm workpiece thickness: min. 8 mm (2 x 4 mm) workpiece thickness: max. 80 mm (2 x 40mm) workpiece stacking: max. 2 pieces - same workpiece dimensions Note: - Workpieces must have a straight edge at the reference edge - Max. curve tolerance: +/- 0.5 mm for a work- piece length = 2000 mm - The workpiece length/width ratio should be >=1. The longer edge of the workpiece should be placed on the machine. - Warped workpieces (>= 0.3 mm) lead to a higher rate of processing tolerances and wear at the workpiece tables - Due to the chips no stackable workpieces can be guaranteed for router processings. - An external cleaning or extraction in the outfeed area is recommended. - For through holes of double parts the drilling quality depends on the workpiece material and the tool as well as on the feeding speed profile and the rotation speed of the drilling spindle. Thus, however, efficiency could possibly be reduced. 1.4 WORKPIECE FEEDING AREA - Air cushion table in rigid frame construction - Surface from Hornit board - integrated fan 1.5 WORKPIECE REMOVAL AREA - Cross belt conveyor in rigid frame construction - 8 transport belts, frequency-controlled drive - 8 electro-pneumatic controlled disengaging device 2. CE SAFETY AND PROTECTION DEVICES - Safety fences in the lateral and rear area - Safety mats in the feeding area 3. ENVIRONMENTAL CONDITIONS - prescribed environmental temperature: + 5 degrees up to + 40° C (in case of environmental temperature >35°C or air humidity >65% a cooling unit for switch cabinet is recommended) 4. ENERGY SAVING MODE - ecoPlus button for starting stand-by operation. The button can be activated during processing. This will have the following impacts after the end of the program: - Primary power of drives will be switched

Condition: used, Mechanical NC Machine Vice BISON Precision machine vice, clamp Jaw width: 150 mm Jaw height: 40 mm Knsdpsxcbpcsfx Afdsb Clamping range: 0 to 210 mm Clamping force: approx. 3 tons Guideway height: 52 mm Guideway length: 425 mm - Mechanical machine vice - Quick adjustment with ball-locking mechanism - Clamping range via trapezoidal spindle approx. 55 mm - Robust base body, ground on all sides - Can be mounted horizontally, vertically, or laterally - Guideway with 18 and 20 mm T-slot Dimensions (L x W x H): 425 x 150 x 110 mm Weight: 27 kg Good condition

Condition: new, Features: 5-axis electronic control overhead control panel, rotatable electronic adjustment for scoring unit automatic rip fence with movement on screw and ball pushing linear guide start / stop pushbuttons integrated in the carriage “Quick Lock” squaring fence sliding carriage with 'arc' profile - 10 years warranty telescopic swing arm made of large dimensioned extrusion and linear guide on recirculating ball bearings Technical Data: saw blade DM mm 550 scoring unit blade DM mm 120 squaring capacity mm 3200x3200 tiltig capacity deg. 0 +46 max. cutting height at 90° mm 200 max. cutting height at +45° mm 130 saw blade speed RPM 2500, 3500, 5000 Ksdpfecrnm Njx Afdonb scoring unit blade speed RPM 8500 DM suction connections mm 120 & 100 main motor Hz 50 kW 7,0 scoring unit motor Hz 50 kW 1,3 cutting capacity right side mm 1500 incl. following options: 570335 "Pro-Lock" system for quick changing of main saw blade without tools

Condition: used, Year of construction: 2007, Machine No. 78, control system, manufacturer Boschert, tool quick-change system, manufacturer Trumpf, punching force: 3 x 280 kN, station 1 Trumpf system tool size 3 (105 mm) with spray device, station 2 Trumpf system tool size 3 (105 mm), freely indexable rotation, station 3 Trumpf system tool/Boschert Revotool size 3 (105 mm), including Revotool 8-position tool holder, travel distances X – 3,000 mm (adjustable up to 9,999 mm), Y – 1,580 mm, punching arm overhang 1,730 mm, sheet thickness max.: 6 mm (clamp opening), stroke height max.: 90 mm, programmable in increments upwards and downwards, punching slug extraction, ball bearings in the machine table Table width left + right: 3,200 mm each, table depth: 2,810 mm, table height: 900 mm, overall width: 6,482 mm, overall depth: 4,600 mm, overall height: 2,110 mm; with workshop cart, manufacturer KS Tools, 7 drawers, contents: various hand tools. Kedpfez Dv Tvsx Afdonb

Condition: good (used), Year of construction: 1990, CNC machining center Manufacturer: MORI SEIKI Type: Partner M300 A-1 Year of construction: 1990 Control: FANUC O-M Travel distances: X/Y/Z: 400 x 300 x 495 mm Distance between spindle center and pallet table (Y-axis): 25 – 325 mm Distance between spindle nose and pallet table (Z-axis): 125 – 620 mm Rapid traverse: 24 m/min Feed rate up to 5 m/min Spindle: Ball screw: 36 mm diameter Feed drives FANUC AC X/Y-axis Model 5, Z-axis Model 10 Main spindle speed: 100 – 6000 rpm Main spindle motor: AC 5.5 kW Main spindle taper: BT 40 Pallet: Pallet size: 315 x 315 mm Pallet indexing angle: 7.5 degrees Indexing accuracy: + / - 2 sec. Repeatability: + / - 1 sec. Pallet clamping force: 3,400 kg Workpiece weight max.: 150 kg Automatic tool changer: Number of tools: 30 Tool change time: 2.5 sec. Collet clamping time: 7 sec. Tool diameter max.: 110 mm Tool length max.: 250 mm Tool weight max.: 8 kg Special accessories: Workpiece end display with alarm light Magazine for 30 tools Operating hours display Knsdpfx Afet Rg E Sjdjb Tool life monitoring Coolant system Work area lighting Weight: approx. 4,500 kg Space requirement: 1,900 x 2,300 mm 21926

Condition: used, Year of construction: 2015, gebraucht 2015 080242 prompt, Zwischenverkauf v Türkei 38900 € 175 to 3050 mm 4 265 mm 2600 mm 410 mm hydraulisch 120 mm/s 10 mm/s 100 mm/s 18.5 kW 4250 mm 1850 mm 2770 mm 10520 kg 4 axes (Y1, Y2, X, and R-axis) Cybelec DNC 880 S CNC control - 2D graphic display - User-friendly conversational programming - Automatic bending sequence calculation - Automatic calculation of developed length for blank cutting - Product and tool memory - Correction capability - USB ports for backup and program storage CNC-controlled backgauge on linear guide and ball screws Backgauge finger blocks on linear guide CNC-controlled crowning New upper tool 1010/A/75°/0.8/105, sectional and gooseneck New lower tool 2009/85° (V = 16, 22, 35, and 50 mm), sectional Fiessler AKAS laser safety device mounted on the upper beam 2 sheet support arms on linear guides Foot pedal Oil fill Operating manual in German BUYING USED MACHINERY IS A MATTER OF TRUST - OUR TRANSPARENCY PROMISE We offer you maximum security and complete transparency. • HONEST INSIGHTS: Detailed photos and functional videos of the current condition • LIVE ON-SITE CHECK: Live testing is possible at our facility • DIGITAL DEMONSTRATION: Individual live demonstration via video call • RISK-FREE PURCHASE: 14-day return policy Kedpfjz Dra Sox Afdenb Details:

Condition: good (used), Year of construction: 2010, Striebig Panel Saw Compact 5220, Year of Manufacture 2010 Kedpfozhx A Rox Afdjnb Robust, self-supporting, firmly welded, and torsion-resistant saw frame Stable, durable saw beam steel construction Robust bearing of the motor carriage ensures high cutting accuracy Powerful, low-vibration 3.9 kW motor (5.3 HP) TRK dust extraction system Automatically adjusting aluminum slat grid with plastic supports Device for wall mounting Ball-bearing support rollers Split center support at optimal working height, with aluminum grid Integrated small parts support made of wood Supersilent sound insulation to reduce saw blade noise Electromagnetic motor brake Saw weight approx. 910 kg Cutting depth 60 mm Saw motor power 3.9 kW (5.3 HP) Saw blade diameter 250 mm Saw blade bore 30 mm *1 Emission sound pressure level at the workplace LpA 82 dB *2 Saw blade speed 5250 rpm 2 dust extraction ports ø 100 mm Connection value 4.8 kW Mains connection 3 x 400 V / 50 Hz Cutting range: L: 4600; Hvertical: 2200 mm, Hhorizontal: 2100 mm Equipment: - Compact 5220 - Strip fence - Mechanically braked support rollers - Freestanding support complete Location: Available from stock in 54634 Bitburg - immediately available -

Condition: new, Saw unit swivels 46 ° on both sides. Programmable, electric saw blade adjustment Control unit with electronic display for saw blade tilt and lift Torsional rigidity and vibration-free working Easier plate feeding due to large trimming frame with roller Telescopic ruler with 2 professional folding stops Excellent cutting precision scoring unit equipped with its own motor - easily adjustable from the outside saw blade diameter of 400 mm scoring saw blade with a diameter of 160 mm 2-position saw blade pendulum protection manell adjustable 3-axis controlled Motorized rip fence with electronic positioning includes: Position display via an encoder Adjustment via ball screw Stepless adjustment via switch or automatic positioning system Cutting width 1270 mm Programmed movement of motorized adjustment and tilting for saw unit UP version with swivelling control panel for maximum flexibility X version with Compex miter fence for quick and accurate execution of miter cuts with automatic compensation of the stop position. (Length compensation) incl. options: - cutting lenght 3200 mm - on / off buttons for main motor and scoring unit integrated in saw carriage - CompeX frame - Version "READY 3 UP" - 2 saw speeds (3500/5000 U/min) Max. cutting width with rip fence 1270 mm Format cuts 3200 mm main motor 7,0 kW, 400 V, 50 Hz Saw blade angle -46 - 46 ° Max. cutting height 90° 136 mm Max. cutting height 45° 97 mm Max. cutting height -45° 60 mm Ksdsd Akygjpfx Afdjnb saw blade diameter 400 mm Diameter scoring saw blade 160 mm (Main) saw blade speed 4000 min¯¹ Dust extraction ports 120 & 80 mm

Condition: used, mileage: 1,49,978 km, power: 100 kW (135.96 HP), first registration: 12/2020, fuel type: diesel, overall weight: 2,800 kg, next inspection (TÜV): 01/2027, color: red, gearing type: mechanical, emission class: euro6, number of seats: 3, Equipment: ABS, air conditioning, central locking, electronic stability program (ESP), soot filter, Vehicle number (for inquiries): 184 Mercedes-Benz VITO 114 EXTRA LONG. FACELIFT MODEL 2021. Service history exclusively at Mercedes-Benz. Single owner. Paint code: * 358U jupiter red Interior trim: * Caluma fabric, black Knodsyhx Tzepfx Afdsb Equipment: * C70 Pedestrian protection * CF0 Standard suspension * CL4 Multifunction steering wheel with trip computer * D50 Full partition * E07 Hill-start assist * E1D Digital radio (DAB) * E2R Radio generation 2 * E34 Buffer battery for start process * ED4 AGM battery 12V 92 Ah * EL8 Two-way front speakers * EN6 Audio 10 * EW6 Preparation for Remote Services Plus * EY5 Mercedes-Benz emergency call system * EY6 Breakdown management * EZ8 PARKTRONIC * F447 - * F66 Lockable glove compartment * F68 Heated and electrically adjustable exterior mirrors * FKA Panel van * FY7 Multi-button remote control * GC9 6-speed manual transmission Fsg 350 * H20 All-round heat-insulating glazing * HH9 Semi-automatic TEMPMATIC climate control * HI1 Climate zone 1 (cold/comfort) * IB6 Model series C447 Vito/V-Class * IG5 Basic * IK0 Complete vehicle * IL1 Domestic (Germany) * IL4 EU/EFTA region * IL5 Left-hand drive * IN3 Wheelbase 3430 mm, long rear overhang * JF1 Rain sensor * JH3 Communication module (LTE) for digital services * JK3 Instrument cluster with pixel-matrix display * JW8 Attention Assist * JX2 Service interval 40,000 km * KB6 Main tank 57 liters * KP6 SCR emission control generation 3 * L Left-hand drive * LA2 Headlamp assistant * LC4 Comfort roof control unit * LE1 Adaptive brake light * LX5 Europe * M44 Alternator 14V/185A * MG9 Generator management * MJ8 ECO start/stop function * MS1 Cruise control * MT2 Emissions standard Euro 6D-TEMP N1 * MX0 BlueEFFICIENCY package * MX8 Engine OM622 DE 17 LA 100 kW (136 hp) * Q50 Detachable towbar (ball head) * R21 Rim size group 1 * RG1 Tires 205/65 R16 * RH6 Tire brand Hankook * RM7 Summer tires * RS3 Steel wheels 6.5 J x 16 * S23 Dual passenger seat * SA6 Passenger airbag * SB1 Comfort driver's seat * VA2 Load compartment trim up to roof height (wood) * VF4 Caluma fabric, black * VV9 Roof frame mounting points * W65 Tailgate * WH9 Factory control code * WM0 Model update control code * X30 Registration certificate part 2 * X99 Manufacturer Mercedes-Benz AG * XA6 Weight variant 3.05 t * XC9 COC papers * XM0 Model update * XM8 Development control code * XN0 Model year change G0-II * XO9 Mercedes-Benz Mobilovan with DSB and GGD * XU1 Signs/printing in German * XW9 WLTP adjustment control code * XZ1 Model generation 1 * Y10 First aid kit * Y44 Warning triangle * Z2K Base * Z41 Registered as truck * ZC5 Sales code 0 * ZM0 Panel van WARRANTY UP TO 36 MONTHS POSSIBLE. TRADE-IN AND FINANCING AVAILABLE. You can find more vehicles on our homepage:

Condition: used, mileage: 6,947 km, power: 120 kW (163.15 HP), first registration: 01/2025, fuel type: diesel, overall weight: 3,100 kg, fuel: diesel, CO₂ emissions: 189 g/km, fuel consumption (urban): 7.2 l/100km, fuel consumption (extra-urban): 7.2 l/100km, fuel consumption (combined): 7.2 l/100km, color: red, gearing type: automatic, emission class: euro6, suspension: steel, number of seats: 6, Equipment: ABS, air conditioning, airbag, central locking, cruise control, immobilizer system, navigation system, onboard computer, parking sensors, power assisted steering, seat heater, sliding door, soot filter, traction control, E07 Hill-start assist, E7M MBUX multimedia system, VR9 STYLE, Q50 Trailer coupling, ball head, detachable, T56 Electric actuation for the left sliding door, T55 Electric actuation for the right sliding door, JB6 Parking package with 360-degree camera, EY5 Mercedes-Benz emergency call system, BS1 Brake calipers with Mercedes-Benz lettering, EY6 Breakdown management, B25 Electric parking brake, G43 9G-TRONIC, CM2 Bumpers and attachments painted in vehicle color, FS5 Illuminated mirrors for sun visors, LG4 Tail, brake and turn signal lights in LED technology, RK8 Light alloy wheels 7 J x 17, 20-spoke design, XO7 Mercedes-Benz Mobilo with roadside assistance and extended warranty, SE5 Lumbar support for driver's seat, SE4 Lumbar support for passenger seat, QA4 Trailer load 2500 kg, T70 Child lock on doors in the passenger compartment, ZC6 Sales code 1, T74 Grab handle for entry, UR1 Seat rail system with quick-release fastener, XX4 Model year G4-II, V33 Carpet in the rear, E1E Digital extra: Hard disk navigation, HH9 Semi-automatic climate control system TEMPMATIC, V36 Roof lining, E1D Digital radio (DAB), Y10 First-aid kit, MJ8 ECO Start-Stop function, IB6 Model series C447 Vito/V-Class, 805 AEJ X4/1, VL2 Velour floor mats, ES3 12V sockets for the rear seat rows on the right and left, F3Q Decorative element EQV, VD5 Interior headliner crystal grey, E1T Touchpad, H00 Warm air duct to the passenger compartment, F48 Heater for windshield washer system, F3Z Comfort closing, IK3 Luxury station wagon, HI1 Climate zone 1 (cold/comfort), W64 Rear window that can be opened separately, XY5 Model year 5, V44 Carpet in the vehicle interior. Kedpfxezlrr He Afdenb We will gladly calculate an individual financing or leasing offer for you and accept your used vehicle as a trade-in. We look forward to welcoming you to our dealership for further consultation. Vehicle condition according to age/mileage, additional touch-up paintwork was carried out on the vehicle as part of the preparation. No liability for printing and typographical errors. Subject to errors and prior sale ... more on our website.

Condition: new, mileage: 10 km, power: 131 kW (178.11 HP), fuel type: diesel, empty load weight: 2,980 kg, maximum load weight: 6,550 kg, tire condition: 100 %, wheelbase: 3,450 mm, fuel: diesel, color: white, gearing type: mechanical, number of gears: 4, emission class: euro6, number of seats: 6, Year of construction: 2025, Equipment: ABS, AdBlue, Bluetooth, USB port, air conditioning, airbag, central locking, differential lock, electronic stability program (ESP), full service history, lane keeping assist, non-smoking vehicle, onboard computer, power assisted steering, tachograph, traction control, trailer coupling, Fuso Canter 6C18 Double Cab 4x4 Mitsubishi Fuso Canter 6C18 4WD Vehicle Description Model: Mitsubishi Fuso Canter Vehicle Type: 6C18 4WD Vehicle Category: All-wheel drive chassis Engine Output: 129 kW (175 hp) Wheelbase: 3,450 mm Gross Vehicle Weight: 6,500 kg Steering: Left-hand drive Cab Paint Colour: White Tyres 1st axle: 2 x 205/75 R 17.5 C27MLB 1F Continental Regio Traction 2nd axle: 4 x 205/75 R 17.5 C27MLB 1F Continental Regio Traction Spare wheel: 1 x 205/75 R 17.5 C27MLB 1F Continental Regio Traction Vehicle Equipment Standard Equipment A86 Limited-slip differential Axle ratio: i = 4.875 Drum brakes on front and rear axle Rear underrun protection Body mounting brackets on the vehicle frame Adjustable steering column mount Three-piece bumper (plastic/steel) Reinforced ladder frame chassis Reinforced vehicle battery, 2x 100Ah (2 batteries) Operating voltage for base vehicle: 12V F62 Electrically heated mirrors Mirror bracket Standard lockable glove box Electric windows for driver and passenger doors Central storage compartment in dashboard Comfort double cab Storage box behind cab rear wall Tray between front seats Tilting cab Cup holder Overhead compartment above windscreen, 1 compartment Central locking with separate remote control Immobiliser with transponder Manual transmission Air conditioning Reverse warning system Kjdoz Dpntjpfx Afdonb Continuously adjustable instrument illumination Main fuel tank: 100 litres Daytime running lights, automatic Fog lights, halogen Halogen headlights 12V, front Speed limiter 90 km/h, EU Start/stop system Engine: R4, 129 kW (175 hp), 2,865 rpm OM5 engine variant, Euro VI OBD Step E, Canter OT0 Mastercode Scattolini OT6 dual battery cover OV2 Prepared for battery isolation relay 12V Digital tachograph 4.1 (2 drivers) RN2 Steel rim 17.5 x 6.00 Wheel hub covers (plastic) Spare wheel/spare rim Single locking spare wheel holder Driver airbag Driver comfort air-sprung seat with horizontal suspension Driver’s seat armrest First aid kit Warning triangle Fire extinguisher Vinyl flooring ABS with EBD (electronic brakeforce distribution) Canter product group code Canter generation code Operating manual, German Special Equipment EF8 Radio with Bluetooth NQ7 PTO (power take-off), 200 Nm, for hydraulic pump RM6 Complete traction tire set VA6 Remote engine speed controller VB1 Mounting and installation of remote throttle CO8 Rear axle with trailer hitch. Reinforced rear underrun protection with ball coupling. Delivery also includes wiring harness and 13-pin trailer socket.

Condition: good (used), Year of construction: 2007, Graule miter and crosscut circular saw Type: ZS 170 with a maximum cutting height of 170 mm sturdy cast iron construction precise ball bearing guide of the tool carriage on hardened and ground steel shafts manual saw feed quick miter adjustment up to 65° horizontally adjustable fixed stops lower saw blade guard can be connected to a dust extraction system Model: ZS 170 Motor: 400 Volt - 2.0 kW Speed: 3500 rpm Knodpfx Aezzf Dzefdjb Cutting length: 410 mm at 90 degrees Saw blade diameter: 420 mm Location: in stock at warehouse 54634 Bitburg - immediately available -

Condition: used, mileage: 98,863 km, power: 100 kW (135.96 HP), first registration: 06/2021, fuel type: diesel, overall weight: 2,800 kg, next inspection (TÜV): 07/2027, color: white, gearing type: mechanical, emission class: euro6, number of seats: 5, Equipment: ABS, air conditioning, central locking, electronic stability program (ESP), soot filter, Vehicle number (for inquiries): 178 Mercedes-Benz Vito 114 CDI MIXTO EXTRA LONG 1 previous owner. Paint code: * 9147 paint color Arctic White MB 9147 Interior trim: * VF4 Caluma black fabric Equipment: * 212L Berlin * 9147 paint color Arctic White MB 9147 * C447 - * C70 Pedestrian protection * CF9 Basic suspension Plus * CL1 Steering wheel adjustable in tilt and height * CL4 Multifunction steering wheel with trip computer * E07 Hill start assist * E1D Digital radio (DAB) * E2R Radio generation 2 * E34 Buffer battery for start process * ED4 AGM battery 12 V 92 Ah * EL8 Two-way speakers in front * EN6 Audio 10 * EW6 Pre-installation Remote Services Plus * EY5 Mercedes-Benz emergency call system * EY6 Breakdown management * F447 - * F61 Interior rear-view mirror * F66 Lockable glove compartment * FKB Kombi van * GC9 6-speed manual transmission Fsg 350 * H00 Warm/cool air duct to passenger compartment * H20 Thermal insulation glazing all round * HH9 Semi-automatic climate control Tempmatic * HI1 Climate zone 1 (cold/comfort) * IB6 Model series C447 Vito/V-Class * IG5 Basic * IK0 Complete vehicle * IL1 Domestic (Germany) * IL4 Region EU/EFTA * IL5 Left-hand drive * IN3 Wheelbase 3430 mm, extended rear overhang * J55 Seat belt warning device for passenger seat * JA1 Warning lamp for windshield washer fluid level * JF1 Rain sensor * JH3 Communication module (LTE) for digital services * JK3 Instrument cluster with pixel matrix display * JW8 Attention Assist * JX2 Service interval 40,000 km * KB6 Main tank 57 liters * KP6 SCR exhaust aftertreatment Generation 3 * L Left-hand drive * LA2 Headlamp assist * LD9 Interior lighting in rear compartment * LE1 Adaptive brake light * LX2 3-month rule market * LX5 Europe Kjdjxxw Nqjpfx Afdonb * M44 Alternator 14 V/185 A * MG9 Generator management * MJ8 ECO start-stop function * MK8 Speed limitation 210 km/h * MS1 Cruise control * MT2 Emission class Euro 6D-TEMP N1 * MX0 BlueEFFICIENCY package * MX8 Engine OM622 DE 17 LA 100 kW (136 hp) * Q22 Fixed ball head trailer hitch * R21 Wheel size group 1 * RG1 Tires 205/65 R16 * RH6 Tire brand Hankook * RM7 Summer tires * RS3 Steel wheels 6.5 J x 16 * S00 Airbag control unit Generation AB12 * S02 Driver's seat * S23 Dual passenger seat * SA6 Passenger airbag * T14 Active stopper sliding door * T70 Child safety locks on passenger compartment doors * U71 3-seater bench 1st row with foldable outer seat * V20 Interior paneling in cargo area, upper sections * V30 Sidewall interior paneling in load/passenger compartment * V43 Wooden floor * VD2 Standard roof paneling * VF4 Caluma black fabric * VV9 Mounting points in roof frame * W16 Fixed window front left in sidewall/sliding door * W17 Fixed window front right in sidewall/sliding door * W65 Tailgate * WM0 Model update control code * X30 Vehicle registration certificate part 2 * X99 Manufacturer Mercedes-Benz AG * XA6 Weight variant 3.05 t * XC9 COC papers * XI1 Change year G1-I * XM0 Model update * XM8 Development control code * XO9 Mercedes-Benz Mobilovan with DSB and GGD * XU1 Signs/printed materials in German * XW5 Omission of tail designation * XW9 Control code conversion WLTP * XZ1 Model generation 1 * Y10 First aid kit * Y44 Warning triangle * Z41 Registration as truck * ZC5 Sales key

Condition: refurbished (used), Year of construction: 2007, operating hours: 5,000 h, functionality: fully functional, Fully equipped machine IMECA BOSS 32 L edger Turning tool holder included 6 fully overhauled motorized tools New tool drive gearbox. New Y-axis, motor, and ball screw. Clamping and guiding device provided with the machine Kodpfozic Ruex Afdsnb New edger channel 380 V / 220 V transformer included

Condition: excellent (used), L-Sealer with Shrink Tunnel For sale is a professional, semi-automatic L-sealer with an integrated shrink tunnel from the quality Italian manufacturer Pactur. It is ideally suited for the fast, professional shrink-wrapping of cardboard boxes, books, bottles, textiles, and other packaged items. The Ladypack 80/SI model is distinguished by its exceptional flexibility and very large sealing frame. It combines the sealing and shrinking processes into a single, compact, mobile unit, saving a significant amount of space on the production floor. Impulse Sealing System: The L-sealer operates using a Teflon-coated sealing wire. It produces clean, extremely strong seals without generating smoke. Efficient Shrink Tunnel: The integrated tunnel features a closed-loop air circulation system with adjustable air deflectors. This ensures perfectly uniform heat distribution and a flawlessly smooth shrink finish—even with complex product shapes. Precise Digital Control: The clear control panel allows for exact adjustment of sealing time, sealing wire cooling time, and tunnel temperature to match the specific film thickness and type (PO, PE, or PVC) being used. Heavy-Duty Conveyor Belt: The tunnel is equipped with a durable, heat-resistant metal mesh conveyor belt. It reliably transports even heavy items (e.g., printed materials, canned goods, or wooden components). Ergonomic Infeed Table: The separate, mobile preparation table allows for quick and easy insertion of products into the center-folded film. The film roll unwinds smoothly on ball bearings. Ideally suited for print shops, logistics centers, laundries, or contract packers for shrink-wrapping: - Cartons and multipacks - Books, catalogs, and stacks of magazines - Textiles and household goods - Bottle packs and cans Technical Specifications & Features: Manufacturer: Pactur (Made in Italy) Model: Ladypack 80 Series Type: L-sealer & shrink tunnel combination Knedpfx Afsz Dtf Asdob Sealing frame dimensions: approx. 560 x 800 mm (for medium to large packages) Control system: Digital control unit for precise adjustment of sealing time and tunnel temperature Conveyor: Robust, heat-resistant metal mesh belt in the shrink tunnel Mains voltage: 380 V / 3-phase Max. power consumption: 11.5 kW Mobility: Entire system and the separate infeed table are mounted on sturdy swivel casters Max. film roll width: 700 mm Max. film roll diameter: Ø 250 mm External dimensions (length x width x height): approx. 1,800 mm x 2,000 mm x 1,120 mm Max. product height: approx. 150 mm (determined by the tunnel opening height) Net weight: approx. 400 kg "Everything from a single source: We would be happy to offer you suitable bank financing for your project." komplett-konzept.leasingo.de Find more items—new and used—in our shop! International shipping costs on request!

Condition: used, Year of construction: 2022, Plus freight 4,000.00 € and installation and commissioning 5,000.00 € Grinding system B Sand 5 with partial lathe Working principle The panel is placed on the infeed table. It goes into the partial lathe and centered. It is ground in the grinding system, through and back. The panel is turned in the partial lathe. It is ground on the other side in the grinding system. Then there are two options: either the panel goes onto the outfeed table and unloaded or it comes back onto the infeed table and is unloaded there (the second option extends the working time). Grinding system equipment 1 upper grinding lamella roller suitable for surfaces. Power 3 kW; D 420 mm; L 1300 mm. Cross brush suitable for grinding the cross fibers. D 420 mm; L 300 mm. Power 1.1 kW. Cross brush suitable for grinding the cross fibers. D 420 mm; L 300 mm. Power 1.1 kW. 3 upper sanding discs for perfectly trimming the longitudinal and transverse wood fibers. Power 1.5 kW each; D 400 mm. Disc brush for beveling edges. The unit functions as a deep brush. After detecting the panel edges, it will follow the door edges. Power 0.75 kW; D 250 mm. Machine features: -The unique sanding system of this machine guarantees perfect wood sanding and/or intermediate sanding of the panels. -All tools are controlled by frequency converters. -All brushes are equipped with quick-release sanding strips without replacing the hub. -The discs are equipped with air bladders to optimize cleaning and service life. -Sanding discs are equipped with a Velcro fastening system. -The feed and rotation speed are PLC-controlled to prevent edge breakage. -High-quality sanding on 4 sides thanks to the system's constant removal rate. -Automatic and rapid unit changeover. - Constant throughput height, PLC and industrial software enable interlinking in a surface line. - Continuously variable speed of the discs, brushes and feed thanks to the fully equipped frequency converter. - Right/left rotation of the discs and brushes with different abrasive grits. - Individually driven feed of the discs, rollers and belts. - Additional adjustment of the brushes and discs to balance the use of the abrasive and to allow for changing the grinding pressure on the surfaces. - Strong support bed made of tubular steel guarantees the best rigidity, stability and flatness. - Planed upper support bed to ensure the best parallelism of the working surface for the grinding discs. - All unit carriages are designed with linear recirculating ball bearing guides, thus high load capacity and high precision. - Motorized feed belt controlled by a frequency converter, 0.55 kW. Machine doors equipped with safety devices. - Machine doors equipped with windows to observe the workpieces during operation. - Under the units, there are 80 mm rubber-coated pressure rollers to hold the workpieces in place during processing. · Low follow-up costs thanks to individual blade replacement. · Low running noise thanks to the enclosed system housing. · All units have suction housings with their respective suction supports. Cover plate with suction nozzle. · Completely encapsulated machine housing for a clean environment. Kedpfjvvkipox Afdonb

Condition: used, Year of construction: 2020, CNC-CONTROLLED MACHINING CENTER WITH MULTIFUNCTIONAL TABLE - WORK CELL VERSIONX400 CELLDrilling and milling made for you!The numerically controlled machining center is equipped with a wide range of milling/drilling tools to meet every need in the processing of wood and similar materials.- More powerful, with drilling spindles with 8,000 rpm and . Technology, the toughest spindle available on the market, with over 1,000 maintenance-free hours of use. Better and more comprehensively equipped, with various configuration options thanks to the multifunctional table to optimally equip the machine according to your needs. Easier and more understandable programming thanks to the integrated MAESTRO CNC CAD-CAM module. Easier to use: the work table is accessible at all times, the electrical cabinet and vacuum pump are integrated, and in the PRO SPACE configuration there are no guards. Supporting structure. The supporting structure consists of a particularly strong monolithic steel base, heavily ribbed and very rigid. The particularly wide support was specifically designed to give the machine stability, ensuring consistent precision regardless of the working conditions and eliminating the need to anchor the machine to the floor. The base forms a large and solid support for the mobile column: the work unit is thus equipped with a balanced, stable, and durable support that can withstand the most extreme stresses, ensuring higher quality performance and greater precision. The mobile gantry consists of a single, solid unit anchored to the base on both sides and slides on pyrotechnic guides with top-quality ball-return slides. The dual motorization along the X-axis ensures top performance even under demanding working conditions. The movement of the lower moving unit (X-axis) and the working unit along the rod of the moving unit (Y-axis) is achieved thanks to a rack/pinion transmission with helical teeth. this creates a greater tooth-to-tooth thrust which achieves greater acceleration and greater speed along the X and Y axes. The specially designed helical gearing ensures less wear on the mechanical components and less noise. The vertical Z axis is driven by a screw with ball return which ensures perfect balance with dynamic loading and strong acceleration and deceleration. The main milling unit is directly coupled to the Z axis carriage and ensures absolute quality of finishes as any vibrations are completely eliminated. Translation along the X-Y-Z axes is carried out by brushless motors driven by static inverters; These ensure: - Reduced processing times thanks to improved acceleration - Better positioning accuracy thanks to the high-resolution encoder - Zeroing of setup operations when switching on the machine thanks to absolute encoders - Zeroing of general maintenance operations since there are no brushes with the "brushless" system The management of the axis displacement and, in general, of the machine's working elements is carried out by an industrial NS module with digital D Kedjvvi N Ijpfx Afdjnb

Condition: used, Year of construction: 2018, Edge banding machine AKV 3006 DK - F with joint milling unit including DIA tools, joint thickness up to 40 mm, workpiece thickness up to 3 mm, combined milling station, radius R 2.5 mm. Technical description: with hot melt adhesive application to the workpiece for edge material up to 3 mm. 60 mm workpiece thickness without joint unit, 40 mm workpiece thickness with joint unit, maintenance-free, coated adhesive reservoir, HF trimming station (16,000 rpm) for front and rear edge overhang, HF milling station (16,000 rpm) with replaceable blade milling cutter (combined design) and fine milling adjustment from the operator side, free spaces for additional processing units (Hebrock system), feed rate approx. 10 m/min, cutting depth adjustment of the trimming saw, signal lamp for workpiece sequence, robust chain drive, ergonomically arranged control panel, double roller pressure beam, unit viewing windows from the rear and operator side of the machine, PLC control including touchscreen. Technical data: - Feed speed 10 m/min. - Board thicknesses from 8 - 40 mm - Weight: depending on the equipment, approx. 1550 kg - Dimensions (L x W x H) 5250 x 1445 x 1600 mm Airtronic incl. cooling and antistatic spraying device 2014, 1 unit Hot air unit for creating an optical zero joint using special edge materials designed for this purpose. - including pneumatic adhesive reservoir positioning - including cooling and antistatic spraying device - including 2 additional edge channels in quick-change design - including special version corner rounding milling cutter, maximum workpiece thickness 60 mm and minimum workpiece length 200 mm - exclusively for Hebrock edge banding machines of the 3000 series - retrofitting possible later - additional costs upon request Technical data: - max. board thickness 40 mm - max. edge thickness 1.2 - 2.0 mm - 7 - 10 m/min feed speed - Air consumption approx. 280 - 580 l/min (only Airtronic), electronically controlled - ready for operation after approx. 2 min Upgrade to 8 mm edge thickness, 1 unit, up to a maximum of 40 mm workpiece thickness including pneumatic saw adjustment special version, minimum workpiece thickness 8 mm, 1 unit 3-point pneumatic milling adjustment, 1 unit Switching between radius - chamfer - flush for the combined milling stations. This eliminates the manual adjustment at the combined milling station for the 3rd stop point. PLC control is essential. Cleaning station (wiper), 1 unit Corner rounding milling cutter, 1 unit, including combined tool and pneumatic adjustment for chamfer/radius, maximum workpiece thickness 40 mm, minimum workpiece length 300 mm, radius R 2.0 mm. Radius pull blade, 1 unit, including pneumatic feed device, radius R 2.0 mm. Flat pull blade, 1 unit, with pneumatic feed control. Chassis complete, 1 unit Adhesive station change system including adhesive outlet device downwards, in preparation, 1 unit, without 2nd adhesive reservoir. - including the possibility of processing PU adhesive with the machine Dado cutter unit, vertical, in the board, 1 unit, including pneumatic feed device. Vertical dado, groove width 8.2 mm, groove depth 8.0 mm, distance from the workpiece edge 14.0 mm Special version, dado cutter motor with higher motor power, 1 unit Internal extraction of the joint unit, 1 unit, at the extraction manifold of the machine Ball bearing for corner rounding milling cutter 24.1 mm, 1 unit Ball bearing for corner rounding milling cutter 24.2 mm, 1 unit Release agent spraying dev Ksdpfjx S Hmzox Afdsnb

Condition: used, Year of construction: 2019, Used machine Year of manufacture: 2019 Video available at: Base machine - Dynestic 7535-R Automatic 12.7 Dynestic table For classic nesting machining with wear plate Machining length: 3700 mm Working direction: from right to left Machine frame in welded construction with ground and hardened prism guides for the traversing carriage, aggregate head and consoles Traversing carriage in gantry design Rack and pinion drive, helical, in X and Y direction, Ball screw spindles Z-axis for precise positioning Technical data: Machining dimensions: Max. load on nesting table X = 3700 mm Kodpfx Aszt Twyefdjnb Y = 2200 mm Max. travel distances X = 5295 mm Y = 2935 mm Z = 565 mm Max. clearance height DYNESTIC table Z = 250 mm from the top of the table (without wear plate) Maximum programmable speed Vector speed: 128.0 m/min X = 80 m/min, Y = 100 m/min, Z = 25 m/min 4-stage extraction hood with pneumatic height adjustment and viewing window Voltage 400 V, 50/60 Hz CONTROL: Dual-core processor Operating system: Windows XP 80 GB hard drive / 1 GB RAM RJ45 network connection 10/100 Base-T Fast Ethernet US keyboard and Microsoft IntelliEye mouse (optical) CD-ROM / CD-RW drive (CD burner) Remote maintenance Integrated network card for data transmission of control and program data. Data transmission via high-speed internet connection Requirement: High-speed internet connection to the machine. DYNESTIC table Solid, continuous machining table with grid spacing, continuous grooves in X and Y direction, Groove spacing: 50 mm with 25 meters of sealing cord for securing the wear plate 1 machining field with stop strips / stop Height: 30 mm, pneumatically lowerable 2 stop strips in Y direction and 1 stop in X direction on the right (when viewed from the front of the machine) Vacuum fields 1-circuit vacuum system Drilling unit 7881-R, 24 spindles Drive power 3.0 kW, incl. saw unit 18 vertical spindles individually selectable Arrangement in L-shape, 11+2 in X and 6 in Y direction 32 mm grid Max. drill diameter: 35 mm Total drill length: 70 mm from the mounting end (depending on plate thickness) Spindle extension stroke: 70 mm Rotation direction: alternating clockwise / counterclockwise n(max.) 1000 - 5710 min-1, infinitely variable Mount: M 10 thread - clearance fit 11 mm without tool, without mount 6 horizontal spindles 2 twin drill spindles in X direction (distance 32 mm between 1st and 2nd horizontal drill spindle) 1 twin drill spindle in Y direction Mount: M 10 thread, clearance fit 11 mm Total drill length max. 70 mm from the mounting end without tool, without mount Pressure booster, increases the standard pressure from 6 to 8 bar 5-axis milling unit 7844, Power: 10.0 kW (S6) cardanic, C-axis rotatable +/- 360°, A-axis rotatable +/- 180° n(max.) = 0 - 24000 min-1, infinitely variable, max. power at 12000 min-1 to 24000 min-1 Liquid cooling (cooling unit included) with HSK-F 63 tool holder with right-hand thread (for right-hand cutting tools) with collet chuck with HSK shank Ceramic ball bearings (hybrid bearings) Tool weight max. 6 kg (incl. holder) Tools:

Condition: used, Year of construction: 2010, honing diameter 54 mm stroke 99999 mm Knsdpfsvk Nkusx Afdjb centre height 9999 mm Control FANUC CNC Ball and spherical honing machine

Condition: new, NSK 7940A5TRDULP3 Angular contact ball bearing set = 2 pieces, unused in original packaging, 100% functional, scope of delivery as shown in the photos. Kjdsi Eb U Aspfx Afdsnb