Used Ball Mandrel for sale (3,537)

Condition: used, offer consists of: New roller - for Stahlfolder/Heidelberg folders working width 56cm working width 66cm Bsdsu Stcbepfx Abtell working width 78cm ball-bearing for rollers: working width 40-94 cm We can also organize the following for you: packaging, loading, transport ( by ship or plane) including customs

Condition: new, ALTENDORF Model F 2 Offer type: New machine, SALE ONLY IN AUSTRIA! Immediately available new machine at a special price with full manufacturer's warranty. The 3.3 m long F 2 is not only cost-effective and space-saving. It is also equipped with everything you need to process perfect edges from the start: diamond-tipped jointing cutters ensure workpieces are excellently prepared for edge banding. The equipment includes a jointing unit (up to 2 mm cutting depth), top-mounted quick-heating glue pot, cross-cut saw, and combination milling cutter. Optionally, the F 2 can also be fitted with a surface scraper. Max. edge thickness: 3 mm Max. workpiece thickness: 50 mm Ready for operation in 3.5 min Feed rate approx. 10 m/min Equipment: F2 next edge banding machine With PLC control (incl. touchscreen) Hot-melt adhesive application to the workpiece for edging material up to 3 mm Jointing cutter (incl. diamond tool) up to 2 mm cutting depth Maintenance-free glue pot with quick-change option incl. glue discharge device HF cross-cut saw station (approx. 12,000 rpm) HF milling station (approx. 12,000 rpm) with separate pneumatic milling adjustment and interchangeable cutter head (combination version) Robust chain drive Ball-bearing double pressure roller Viewing window from the rear of the machine Extendable workpiece support Including special equipment: F2/12 surface scraper (incl. pneumatic lift) F2/30 pneumatic 3-point adjustment (for radius, chamfer, or flush trimming) Bjdpfx Abel D Rp Ejtsll F2/27 nesting for milling stations

Condition: used, offer consists of: New roller Bsdpfoxr Adtsx Abtoll - for Stahlfolder/Heidelberg folders working width 56cm - 330€ / pc. working width 66cm - 365€ / pc. working width 78cm - 400€ / pc. ball-bearing for rollers: working width 40-94 cm - 28€ / pc. We can also organize the following for you: packaging, loading, transport ( by ship or plane) including customs

Condition: used, offer consists of: Bledpfjxr Ad Tox Abtel New roller included ball-bearing - for Horizon folders working width 54-56cm - 400€ / pc. We can also organize the following for you: packaging, loading, transport ( by ship or plane) including customs

Condition: new, functionality: fully functional, Year of construction: 2025, pipe diameter (max.): 76 mm, bending angle (max.): 190 °, bending radius (max.): 250 mm, power: 44 kW (59.82 HP), input voltage: 400 V, input frequency: 50 Hz, type of input current: three-phase, warranty duration: 24 months, drive type: Servo - Hydraulic, operating speed: 48 mm/s, pressure: 150 bar, wall thickness: 3 mm, working length: 3,600 mm, Equipment: documentation/manual, 76x3mm Fully Automatic Cnc Tube Bending Machine The "Griffin" tube bending machines are hybrid structures. This type of tube benders includes hydraulic and pneumatic for clamping operations. Bending, feeding, rotation, stack changer and tube aligment operations working with servo engine. Flexible bending and working capacity with CNC control system. The capacity to adjust molds in 3 different radius scales Ability to automatically convert 3D technical drawings to bending program Multivariable roll bending system Ability to work with or without a mandrel Automatic oil cooling system With linear guideway systems minimize the system gaps in moving parts Program changing feature while in the bending process ETU bending simulation program, for bending process, helps to make 3d tube bending arising from the coordinates, with excellent results. With DcOnTool tool, you can convert X, Y, Z coordinates to bending program (Y,B,C) Can review the last error messages with Dlog Bljdpfjvwg H Hox Abtel Its user-friendly, easy, knowledgeable and quick-to-learn design allows you to start the project quickly. Easy to use with 17 inch computer. The vibration-free structure shall help your work. Unlimited program saving and changing Turkish – English and French language 10 years sending spare parts

Condition: ready for operation (used), Year of construction: 1999, spindle motor power: 13,500 W, spindle speed (max.): 7,500 rpm, overall weight: 8,000 kg, controller manufacturer: SIEMENS, controller model: 840D, This 3-axis HULLER HILLE DVH 150 Duo vertical turning machine was manufactured in 1999. It features a maximum turning diameter of 160 mm and a swing diameter of 200 mm. Equipped with a Siemens 840D CNC control, it offers high precision and efficiency with speeds up to 7500 rpm and rapid traverse rates up to 60,000 mm/min. Ideal for complex turning tasks, the HULLER HILLE DVH 150 Duo machine we have for sale. Contact us for further details. Additional equipment • Central lubrication system Machine Benefits Technical Machine Benefits Bjdozwvzispfx Abtjll • X-axis: roller guide / z-axis: glide guide • X-axis roller guide and z-axis glide guide, maximum axis speeds: x-axis 60,000 mm/min, z-axis 30,000 mm/min, maximum feed rate: 30,000 mm/min, maximum rapid traverse: 60,000 mm/min • Maximum swing diameter: 200 mm / maximum workpiece and chuck height: 220 mm • Spindle diameter in front bearing: 80 mm • Machine connection power: 45 kw • Ball screw pitch: x-axis 20 mm, z-axis 10 mm • Central lubrication interval: 15,000 m, amount: 4 cycles

Condition: new, #K CNC Lathe Müga Type / Model iUltimate i42-2s Control Mitsubishi M830 Condition New #ABAN Technical Data Axes: "10 NC Axes" Main Spindle: X1, Y1, Z1, C1, B1 Counter Spindle: X2, Y2, Z2, C2, B2 Description Main Spindle Spindle Speed 6000 rpm Motor 7.5/11 kW Chuck 173E A5 spindle nose Spindle Bore 42 mm Driven Tools 12, 1.5 kW, 4000 rpm Tool Holder ER 20 OD Tool Holder 20 mm x 6 pcs ID Tool Holder 20 mm x 5 pcs X/Y/Z Travel Ø 300 / Ø 770 / 250 mm Servo Motor 1.5 kW Rapid Traverse 30 m/min Hydraulic Motor 0.75 kW, 75 l Coolant Pump 1.5 kW, 240 l, 5 bar, 75 l B Axis Motor 0.75 kW, 360° C Axis braked Description Counter Spindle Bedpfx Abszv Thkstjll Spindle Speed 6000 rpm Motor 2.2/3.75 kW, built-in Chuck 173E A5 spindle nose Spindle Bore 30 mm Driven Tools 12, 1.5 kW, 4000 rpm Tool Holder ER 20 OD Tool Holder 20 mm x 5 pcs ID Tool Holder 20 mm x 9 pcs + extension. X/Y/Z Travel Ø 900 / Ø 770 / 300 mm Servo Motor 1.5 kW Rapid Traverse 30 m/min Coolant Pump 2.0 kW, 25 bar, 30 l Part Ejector Pneumatic B Axis Motor 0.75 kW, 360° C Axis braked Total Tools 49 Dimensions L x W x H approx. 3.8 m x 2 m x 2 m Weight approx. 5600 kg Travels Rapid Traverse X1 Ø 300 mm 30000 mm/min Y1 Ø 770 mm 30000 mm/min Z1 250 mm 30000 mm/min X2 Ø 900 mm 30000 mm/min Y2 Ø 770 30000 mm/min Z2 300 mm 30000 mm/min C1 360° 60 rpm C2 360° 60 rpm B1 360° 30 rpm B2 360° 30 rpm Features: Linear axes with servo motors The 6 linear axes are equipped with Mitsubishi servo motors and directly coupled to the ball screw. This ensures maximum accuracy. Simultaneous machining on main and counter spindle Two programs (workpiece front and back) can be processed independently on the main and counter spindle. Synchronous part removal The workpiece can be removed during rotation, so that one workpiece can be machined while another is being removed. B-axis inclined machining The iUltimate is equipped with two swivel heads on the main and counter spindle, allowing for machining on both sides at an angle. Equipment: Swiveling control panel Driven tools Workpiece clamping device Workpiece conveyor belt Extendable chip conveyor Coolant system 4x internal coolant for main spindle Intelligent handwheel Collet chuck 173 E Interface for bar loader C-axis main and counter spindle Disc brake for C-axis main and counter spindle Y-axis main and counter spindle Central lubrication Work area light Signal light on the machine Control cabinet heat exchanger Mounting elements various tools

Condition: reconditioned (used), functionality: fully functional, Year of construction: 2018, controller model: Rexroth IndraMotion MTX, laser type: CO₂ laser, laser power: 3,200 W, punching force: 22 t, Standard equipment: Machine - Work area 3050 x 1550 mm - Drives with maintenance-free three-phase motors - Stable, easily accessible C-frame - Coordinate guidance - Linear magazine with 25 positions for clamping dies and tools - Follow-up device with programmable pressure clamp - Flap for stamped parts 500 x 500 mm incl. sensor - 2 scrap containers (=> not included with part conveyor belts) - Foot pedal for die closing - FocusLine - NitroLine - FastLine - FlyLine - PlasmaLine - Additional Xp and Yp axis - Ejection cylinder for laser parts - Fast flap for laser parts 500x500 mm incl. sensor - Adjustable laser cutting support - Slag cone detection TRUMPF Laser - Laser TruFlow 2700 incl. LensLine and optimized standby mode - High-frequency excitation - Closed beam guidance - Fine filtration of compressed air for beam pipe ventilation Cutting Head - Lens cutting head with 170 mm focal length - Universal cutting head quick-change device (UTI) - LensLine with condition monitoring - ControlLine Punching Head - Electro-hydraulic punching head - Rotatable mono-tool holder - Programmable pressure clamp position - Tool length compensation - Scrap extraction - Calculation of filling level in the punching console - Stroke counter for punches - Spray lubrication for punches - Level monitoring for tool lubrication Control System - Open control system based on Bosch Rexroth IntraMotion MTX - Integrated technology data - 160 GB hard drive capacity - External control panel with 15" TFT touchscreen - Programmable cutting gas pressure - Teleservice interface via the internet - Automatic shutdown with wake-up function - Production plan Data Transfer - USB interface - RJ45 network connection - Wireless Operation Point (basis for Visual Online Support) Safety - CE marking - Multi-beam light barriers - Rapid shutdown of drives - Warping detection - Protection against stray radiation - Compact dust extraction system Extended Standard Equipment - Hydraulic clamping die (4 pieces) - Ball tables (=> not included with brush tables) - Chip container (=> not included with chip conveyor) - Cooling unit (water-air) + Laser TruFlow 3200 incl. LensLine and optimized standby mode + MultiTool function + Thread forming function + MultiShear function + Roll technology function + Softpunch function + StripLine function + Active die + Height-adjustable clamping die (4 pieces) + Follow-up cylinder - Vibration-damped installation + Chip conveyor with tilting container + Brush tables with loading and unloading assistance SheetMaster N0140A0054 automation: - Suction frame with 36 suction cups (y-axis = 400 mm) - Movable suction bars (v-axis = 170 mm) - Peeling suction cup Blodozv Twxepfx Abtel - Vacuum sensor - Sheet thickness gauge for double-sheet detection - Central lubrication - TRUMPF control system based on Rexroth IndraMotion MTX - Automatic die closing of the machine + Extended guide rail + Table extension (brush design) + Fixed additional support table on the left (brush design) + Automatically adjustable additional support table on the right (brush design) + Large C-frame for processing oversized parts + Parallel loading and unloading of the SheetMaster during main processing time + Unloading monitoring + Lowerable GripMaster for large formats (3000 x 1500mm) + Scissor lift table (3000 x 1500)

Year of construction: 2025, condition: ready for operation (used), Automatic Coil Cut-to-Length Line manufactured in 2025. This SACFORM CRL1503-6 is designed for processing aluminum, mild steel, and stainless steel with a material thickness capacity of 1-3 mm. It features a maximum coil weight of 6000 kg and a finished sheet length of 500-4000 mm. If you are looking to get high-quality cut-to-length capabilities, consider the SACFORM CRL1503-6 machine we have for sale. Contact us for further details regarding this machine. • Capacity: 1500 mm width x 1–3 mm thickness (AL/MS), up to 1.5 mm (SS), 6-ton coils Blsdszwc Ipjpfx Abtsl • Materials: Aluminum (AL), Mild Steel (MS), Stainless Steel (SS) • Finished sheet size: width 500–1500 mm; length 500–4000 mm • Coil specs: ID 490/610 mm; OD max 1400 mm; weight max 6000 kg • Line speed: 30 m/min free working speed (start-stop shear adds ~2.5 s per cut) • Operators: 1 • Power and utilities: • Electrical: 380 V, 3-phase, 50 Hz; auxiliary 220 V, 50 Hz; 24 V DC solenoids • Installed power 32 kW; typical working consumption 13 kW • Pneumatic air: 6 bar • Hydraulics: service 120 bar; main service 220 bar; 2 hydraulic units, each 40 L • Control and electronics: Siemens PLC; Siemens/Rexroth electronics and control panel; 7" touchscreen; remote support capabilityLine configuration (included modules and key specs) • Hydraulic coil loading car: • Capacity 6000 kg (single coil), max width 1500 mm, max OD 1400 mm • V-type bed, hydraulic traversing and lifting (300 mm stroke), panel control • Single-mandrel hydraulic decoiler: • Capacity 6000 kg; max strip width 1500 mm; ID 490–610 mm; OD 1400 mm • Hydraulic mandrel with conical expansion; motorized drum with reducer, adjustable speed • Upper pressure/safety arm; laser sensor for controlled decoiling and auto stop • Automatic routing/threading platform with servo bending arm: • Automatic coil threading and transfer to straightener • Bending arm: 2 rollers Ø110 mm, servo-driven; 2 pistons • Platform movement: hydraulic up/down and fwd/back; automatic, no manual threading • Straightening unit: • Speed up to 30 m/min; working width 500–1500 mm • 11 rollers total: 7 straightening, 2 feeder, 2 pinch (all Ø110 mm) • Motorized straightener adjustment; hydraulic openable roller group • Pneumatic roller pressure; low-backlash gear group; gear material 8620 • Vertical bearing guides; 2 guiding units; width adjustment via gear system • PVC coating feature included • Servo feeder: • Speed up to 30 m/min; max width 1500 mm; thickness 1–3 mm • 2 servo rollers (upper/lower) Ø110 mm; roller material 4140 • Encoder-based cut-to-length control; pneumatic pressure; low-backlash gears • Guiding: double-sided lateral guides, horizontal guide rollers, gear-width adjustment, right/left alignment to 90° • Servo control: automatic feeding cycle, programmable velocity, programmable cut length and quantity, memory for 250 programs and up to 50 lengths, 7" touchscreen, 8 external outputs • Start-stop guillotine shear: • Cutting capacity 1–3 mm; width 1500 mm • Blade material 2379; high-carbon/high-chrome blades; 2 edges upper, 4 edges lower • Adjustable blade gap; mechanical sheet clamping • Approx. 2.5 s cycle time loss per cut; Teflon slideways on cutting beam • Hydraulic and pneumatic brands: Bosch Rexroth/Bucher hydraulic valves; Festo/Pemaks pneumatics; motors Gamak/Yilmaz • Electrical/automation: Siemens PLC; Siemens/Rexroth components; electrical cabinet and automation systemNotes • Stainless steel capacity limited to max 1.5 mm thickness.

Condition: good (used), Polar Mohr 115 X Plus Paper Cutting Guillotine This machine is in very good condition, ready for production, and has been serviced. Low mileage. Year of manufacture: 2011. This is the most valued guillotine brand, a flagship product. Bedpfx Abszw T A Rstell Technical specifications: Cutting width: 1150mm Stack height: 165mm Programmer with 18.5″ color touchscreen display Air table Photocells Chrome table surface Ball screw drive for the rear comb Optical cutting line Enlarged side tables Knife change via the control panel Additional rear table guards Weight: 3200kg 380V power supply Includes documentation, a tool kit, a tapping block, a spare knife, and one knife in the machine.

Condition: excellent (used), Year of construction: 2016, functionality: fully functional, operating hours: 750 h, power: 9 kW (12.24 HP), input voltage: 430 V, number of axes: 4, number of slots in tool magazine: 10, controller manufacturer: Yaskawa, total height: 800 mm, table length: 4,000 mm, table width: 2,000 mm, Machine purchased from the manufacturer Plot Electronic in 2016. Used for milling models and molds in materials: MDF, polyurethane. In 2022 it was upgraded with the addition of a 4th axis and an oscillating head. Full technical specification of the machine: - Stable welded construction with an annealed gantry made in hybrid monolith technology - Mechanics – linear guides, ball carriages - Helical rack and pinion system - Spindle with tool changer, 9kW, ISO 30, ER 32 - Linear tool magazine holds 10 tools - Drives – AS servo drives - CNCGraf control module in Polish Blsdpfxozxqtpj Abtjl - Simulation possible before machining, real-time cutting visualization - Material height sensor - Tool length sensor - Spindle cooling system – compressed air - Control cabinet with computer and keyboard - Vacuum table - T3000K oscillating head - 4th rotary axis on a tailstock, mountable on the table - Spindle speed control system

Condition: not inspected (used), Number of sanding units 4 St sanding width 190 mm Sanding height max. 4-180 mm Bodpjt Tqy Ejfx Abtjll weight 4200 kg Hess Expert 4-belt single wood sanding machine machine will be checked by our technicians ----- Ø Grinding at the bottom/top Ø With 2 offset grinding units each (bottom and top) Ø Grinding units (bottom and top) connected in series according to the Dressing principle Ø Pre-sanding with coarse grit (calibrate) Ø Regrinding with fine grit (finish) Ø Central motorized height adjustment of the lower grinding units Ø Central motorized and synchronous height adjustment of the entire upper Grinding and brushing units including the upper transport units Ø Oscillating sanding belt utilization (during the sanding process) Ø Absolute power connection thanks to 5.5 KW motors and large dimensions drive drums Ø Oxide ceramic grinding shoe for - exact surface geometry - no adjustment work - permanent dimensional accuracy - completely maintenance and wear-free Basic structure: Stable, heavy welded construction made of strong-walled rectangular profiles additional, statically calculated reinforcements for optimal Vibration dampening. Staggered grinding units with large dimensions Belt drive drums for slip-free belt running. Two-point suction for direct and flying dust with sealing brushes and integrated sanding belt blow-off Device to increase the service life of the sanding belts. Grinding units in heavy steel plate construction as the basis for vibration-damped, quiet tape running. Absolutely backlash-free guides as ball linear sets hardened and ground shafts. Height adjustment of the grinding units via hardened and ground special linear guides as well as pre-tensioned ones Guide carriage. Permanent precision thanks to dust and dirt protection Ball linear sets and guide carriages. Large-sized pre-grinding rollers as contact rollers. Contact rollers and Sanding shoes in a balanced ratio to the sanding belt grain load. The large drive drums guarantee full transmission the 5.5 kW drive power of the grinding motors on the sanding belt. Therefore Slip-free, stable running and optimal heat dissipation. This makes it the strongest Chip removal possible. Automatic machine stop activation in the event of a belt break. Visual display on the control panel and via flashing lights on the machine. Sanding shoes for finish completely maintenance-free and wear-free made of oxide ceramic with optimal heat dissipation. Grinding belt tension via appropriately sized compression springs. Sanding belt relaxation for belt changing using a pneumatic device sensitive, distortion-free placement of new tapes. Upper grinding unit and brush device centrally motorized Height adjustable with digital display in the control panel for the motorized Grinding thickness adjustment. Brushing and finishing device, for better surface finish, integrated into the basic machine. Two special brush rollers 150 mm Æ arranged one above the other in synchronous function for advance thrust. Separate height adjustment of the brush rollers on precise Carriage guides for post-correction of wear. Additional transport roller for Removal or further transport of the workpiece from the automatic grinding machine with the conveyor belt. Wooden guide in the inlet area for hard guide and bearings mounted on both sides pressure rollers. Safe transport of profiled workpieces on ca...

Condition: used, Year of construction: 2007, control Siemens Sinumerik 840 D weight 57.000 kg voltage 400 V Gleason PFAUTER CNC gear hobbing machine P 2400/2800 for gear cutting of cylindrical and worm gears as well as all other regularly occurring rollable profiles and shapes on the cylindrical workpiece circumference. Large gear hobbing machines from Gleason offer maximum productivity for roughing and finishing cylindrical gears for many industries: wind turbines, industrial gearboxes, mining and shipbuilding, gear machining and many more. The power range of the drive takes future tool developments into account. Of course, the gear hobbing head drive is also backlash-free. These machines are particularly well suited for use with state-of-the-art, cutting materials, regardless of whether dry or wet machining is preferred. The machine can be used for dry or wet machining and is also equipped with the appropriate chip conveyor for both machining methods. The machine is equipped with an internal profile milling head as a motorised milling head. --> Working range and technical data Nominal workpiece diameter: 2.400 mm --> Largest millable diameter approx.: 2.800 mm --> Smallest/largest distance between cutter and workpiece axis: 100/1.200 mm --> Largest axial slide travel (special design): 1.300 mm --> Largest clampable cutter (internal milling head): --> Diameter max: 440 mm --> Max. cutter width: 90 mm --> Swivel range of the internal profile milling head/vertical axis: +/- 15° --> Milling mandrel taper: HSK-B160 --> Maximum milling cutter travel: 300 mm --> Table diameter: 2.500 mm --> Part wheel diameter: 2.200 mm --> Table bore --> Diameter: 800 mm Bedpfxswzyp Io Abtoll --> Depth: 875 mm --> Maximum table load approx.: 40.000 kg --> Max. feed and rapid traverse speeds: --> axial (Z-axis): 4.000 mm/min --> radial (X-axis): 3.000 mm/min --> tangential (Y-axis): 3.000 mm/min --> Milling cutter cooling lubrication device/electric centrifugal pump: approx. 150 l/min --> Increased drop height of magnetic chip conveyor: 1,600 mm --> Increased main stand: 1,300 mm axial slide travel --> Internal profile milling head as motor milling head instead of standard motor milling head --> Max. millable profile depth in steel with approx. 600 N/mm² strength: approx. 65 mm --> Infinitely variable milling speed: 50 - 150 min?¹ --> Max. milling cutter diameter: 440 mm --> Min. milling cutter base circle diameter: 310 mm --> Max. milling cutter width: 90 mm --> Min. internal diameter at 0° bevel angle: 800 mm+) --> Max. workpiece height at 0° bevel angle: 600 mm --> Max. workpiece ring thickness (including clamping device): 500 mm >> Wet and dry, 2 chip conveyors, table diameter 2500 mm

Condition: used, Year of construction: 2019, Second-hand machine Year of manufacture: 2019 Only 110 operating hours! Features and technical specifications: Machining paths: - X = 1800 mm - Y = 900 mm - Z = 80 mm Made from 18 mm Koskisen boards Milling bed made from 19 mm MDF as a sacrificial plate with guide rails and slot blocks, used as a clamping method. Base frame with bracing, cast in polymer concrete, prepared for transport by pallet truck or forklift. Mechanical kit comprising profile guides including guide carriages, as well as ball screws 2010 and 1605 for all axes. Shaft couplings and high-performance grease for lubricating the individual carriages, as well as energy chains including connection sets. Control kit comprising a Triple Beast for controlling 3 axes, with an Ethernet connection. Leadshine driver board for the fourth motor. Four stepper motors, 5.0 A, 3 Nm, with motor cables, plus a switching power supply rated at 48 V, 6.7 A, LED board for breakout board, ribbon cable and proximity sensors, small parts such as wires, wire end ferrules, control cable, heat-shrink tubing and cable lugs. Fully installed in an aluminium housing, including electrical kit and emergency stop. - 21.5-inch monitor as a built-in display, including a mini PC with Windows 7, Rhino 5.0 CAD software, Estlcam G-code generator, Beamicon2 control software, as well as a mouse and keyboard, pre-installed in an ergonomic console. Tool length sensor for determining the length and adjusting the active zero-point offset. Bjdpfx Aezk Npgjbtoll Optional extras: - High-frequency spindle with 2.2 kW, including union nut, frequency converter, mains filter, braking resistor and collet set. - PC with 8 GB RAM and AMD processor - Rhino 5.0 CAD software for creating both simple 2D data and 3D solid models Availability: at short notice Storage location: Flörsheim

Condition: excellent (used), KELLENBERGER PRECISION UNIVERSAL CYLINDRICAL GRINDING MACHINE TYPE: 600 U YEAR OF MANUFACTURE: 2003 PARTIAL OVERHAUL: 2026 (Technical data see attached documents) Center height: 175 mm (without height adjustment) Grinding length: 600 mm Equipment: - Standard accessories - Internal grinding device for D: 80 mm max. incl. coolant supply through the workpiece spindle - Grinding wheel equipment left for D: 400 x 50 x 127 mm (standard) - Grinding wheel equipment right for D: 300 x 40 x 127 - Grinding wheel flange for wheels D: 400 x 50 x 127 mm (left) and D: 300 x 40 x 127 (right), balancing weights outside (3 pieces left, 2 pieces right) - Variable spindle drive with Danfoss frequency converter - Balancing device for dynamic balancing, type ELASO MANOBALANCE 750/EB 2000 - RENAUD internal grinding spindle type REN 828 (grease-lubricated with compressed air lock) - Various internal grinding mandrels for REN 828 – 1235, 1645, 2060, 2575 (4 pieces) - Various chucks HJNZ 28 for HJN 828 with 2 collets D: 3 mm and D: 6 mm - Tailstock standard MK 5 with adapter flange DIN 55027 size 5” Bore D: 38.2 mm (standard) - Sine bar on the tailstock - Tailstock with manual retraction for quill travel - Micrometer adjustment on the tailstock - Pneumatic relief of the tailstock - FORKARDT planetary three-jaw chuck D: 200 mm - REISHAUER wedge-bar three-jaw chuck D: 160 mm - Permanent magnet chuck D: 200 mm - Collet chuck for Schaublin B32 - Set of 59 collets Schaublin B32, D: 1.0 – 30.0 mm, graduation 0.5 mm - Set of 8 workpiece supports incl. holder - Three-jaw steady rest, 175 mm, foldable, D: 3-120 mm - Swiveling dressing tool for dressing during external, surface or internal grinding - Side and angled dressing tool for side and angled dressing of the grinding wheels - Dial indicator stop for table swiveling with dial indicator 1/100 mm - Dial indicator stop for table longitudinal movement with dial indicator 1/100 mm - Dressing stop for internal grinding - HEIDENHAIN Digital length measuring system for the X and Z axes - STREULI paper band filter SPB 3, 90 l/min at 0.26 bar, tank volume 240 l Blsdpfxjzhma Do Abtol - WALDMANN machine lamp - Set of vibration-damping pads - Three-color paint finish (light gray RAL 7035/blue RAL 5012/dark gray RAL 7016) - New acceptance test report according to KELLENBERGER standard - CE conformity - Documentation Condition: very good, machine geometrically and mechanically overhauled (see geometry report)

Condition: used, Year of construction: 2015, functionality: fully functional, Heavy-duty pallet decoiler with integrated precision straightening head, designed to feed coiled strip material into stamping lines and other downstream processing. The large 1500 mm rotating table handles full pallet-mounted coils up to 3000 kg, while the 9-roll straightener (5 lower driven + 4 upper) ensures a flat, stress-relieved strip ready for production. Both turntable and straightener are independently driven via frequency inverters, allowing precise speed and tension control. Ideal for stamping operations where coil material is delivered on pallets rather than mandrels — eliminating the need for separate coil cars and reducing changeover time. Technical Specifications Table diameter 1500 mm Table load capacity 3000 kg Max. table rotation speed 10 rpm Blodjzav Ngspfx Abtel Strip speed 10 m/min (at core Ø 300 mm) Stamping direction Left to right Winding direction CW or CCW (selectable) Max. strip thickness 1.5 mm Max. strip width 220 mm Turntable drive motor 2.2 kW, inverter-controlled Turntable bearing Four-point bearing Straightener head 9 rolls (5 lower + 4 upper) Roll diameter 40 mm Lower rolls All driven Straightener drive motor 0.75 kW, inverter-controlled Electrical connection 3×400V + N + PE, 50 Hz, 16 A Dimensions (L × W × H) 2250 × 1500 × 1700 mm Weight ~750 kg Paint finish RAL 7035 light grey, structured

Condition: excellent (used), Planing width 520 mm Min./Max. working height 3 – 240 mm Motor power 5.5 kW, 400 V, 50 Hz Speed of planing shaft 4500 rpm Bljdpfx Asy Egmuobtol Diameter of planing shaft 120 mm Planing knives 4 pcs Dimensions of thickness table 520 x 850 mm Feed rate 6.5 / 10 / 13 / 17 m/min Dust extraction diameter 150 mm Electric height adjustment Handwheel for fine adjustment of thickness table height Spiral-toothed steel feed roller Segmented pressure bar 2 steel extraction rollers Table roller Low voltage release Emergency stop switch Knife setting gauge Test report for conformity with Section 4 of the AM-VO NEW V-belts NEW BALL BEARINGS NEW PLANING KNIVES Dimensions approx. L x W x H = 1120 x 990 x 1000 mm Weight approx. 600 kg Note on used machines: • Subject to errors in technical specifications and prior sale. • Prices quoted are ex-works, pick-up only – free loading! • The machine has been cleaned and function-tested. • All machines are sold as seen, without any warranty claims. The buyer is free to inspect the machines at our location. • Special agreements are only possible in written form. (We will only answer inquiries if you provide your address and telephone number!)

Condition: new, power: 55 kW (74.78 HP), fuel type: diesel, fuel tank capacity: 60 l, axle configuration: 4x4, emission class: euro2, Year of construction: 2025, Equipment: all wheel drive, = Additional options and accessories = - PTO = Remarks = Country of origin: India Displacement: 3,908cc Bljdoy Tyc Sopfx Abtel Torque: 257 Nm @ 1400 rpm Dimension: 3,660 X 2,010 X2,400 Gearbox type: 8F + 2R partially synchromesh No. of cylinders / aspiration: 4 / naturally Capacity (cm³): 3,908 Bore x stroke (mm): 104x115 Power @rated speed (2300 rpm) - ECE R120 (kW/hp): 54.7/75 Max. torque (gross) (Nm@rpm): 257 @ 1400 Torque rise (%) 25 Transmission - 30 kph 8F+2R constant mesh & sliding mesh (optionally synchronised on 3th & 4th gear) with epicyclical reduction for low - high range selection Speed range (kph) 2.97-29.74 Optional with creeper (F+R) 12+3 Min. speed with creeper (kph) 1.03 Optional without creeper (F+R) 12+3 Speed range (kph) 2.14 - 31.85 Flexion Bar lower link draft sensing Standard Rear linkage category Cat. II Mechanical lift with Lift-O-Matic™ Standard Position draft mixed and float controls Standard Main pump flow - Standard (lpm) 45 Steering pump flow (lpm) 28 Max. number of remote valves 2 Linkage Maximum lift capacity at ball ends with no assist arms (kg) 1500 Maximum lift capacity at ball ends with assist arms (kg) 2000 Engine speed at 540 rpm (rpm) 1967 PTO activation mechanical Turn angle 2WD/4WD (°) 52/38 Min. turn radius w/brakes 2WD/4WD (mm) 3275/4200 = More information = Number of cylinders: 4 GVW: 2.700 kg Wheelbase: 216 cm

Condition: good (used), Year of construction: 1998, Ref. -No.: 10583 Manufacturer: MTE Type: BF 4200 Year of construction: 1998 Type of control: CNC-Steuerung Control: Heidenhain TNC 426 Storage location: Halberstadt Country of origin: Germany X-Travel: 4000 mm Y-Travel: 1200 mm Z-Travel: 1500 mm Turning Speeds: 2.500 RPM Rapid Traverse X/Y/Z: 400 m / min Table surface area (LxW): 4200 x 1000 mm Tool changer: 40 Table load max.: 13.000 kg Tool Taper: SK 50 Weight: 20 t Number Of T-Slots: 7 Pcs Width of the T-slots: 22 mm Distance between the grooves: 140 mm Further information: Bedpfxjzx Nybs Abtoll - Heidenhain HR410 handwheel - 3D scanner, infrared - The ball screw on axes Z and Y runs clamped and supported on combined radial/axial roller bearings and radial ball bearings with 250 N/sqm stiffness. The machine can be viewed while powered up.

Condition: excellent (used), Year of construction: 2011, ENGEL DUO 5550/1100 Injection Moulding Machine Year of manufacture: 2011 Bledpfx Asw U Taxobtel Injection unit Two short-barrel cylinders for plastic injection. Direct screw drive; ceramic heaters on cylinders. Standard screw geometry L/D = 22. Hardened and nitrided screw, diameter Ø 90 mm. Maximum injection volume: 2,740 cm³. Maximum shot weight (PS): 2,520 g. Open nozzle: front radius R = 35 mm, channel diameter Ø 6 mm, mounting thread M55×3. Increased specific injection pressure: 2,180 bar. Plasticizing capacity: 85 g/s (for polystyrene, screw Ø 90 mm). Injection unit equipment: M3-type barrel – bimetallic, increased corrosion and wear resistance, permissible temperature up to 350°C. S4V-type screw – heat-treated, chrome-plated, with armoured edges; increased resistance to corrosion and wear. Special G11.3 screw geometry optimized for processing. R12 non-return valve (multi-ball, recommended for PC, PMMA, ABS). Clamping unit (clamping system) Hydromechanical dual-platen clamping system. Four short high-pressure cylinders on the nozzle side. Four tie-bar tensioners on the ejector side. Two diagonally mounted fast movement cylinders on the clamp unit. Opening stroke dependent on mould height (dynamic stroke adjustment). Moving platen guided on the machine frame – ensures platen rigidity and parallelism. Clamping force: 11,000 kN. Mould mounting platen dimensions: 1,850 × 1,810 mm. Tie bar spacing: 1,400 × 1,150 mm. Mould mounting height: 600–1,200 mm. Maximum opening stroke: 1,800 mm. Mould cooling system: 10 water circuits with rotameters (max. 30 l/min each). Special execution of platens with additional holes for ejector systems in two arrangements (horizontal and vertical). Core pull drives (core pull systems) Independent hydraulic core pull drives: 2 units on the moving platen, 2 units on the fixed platen. Hydraulic pressure reduction systems for core pulls. Independent pneumatic core pull drive on the moving and fixed platens. Hydraulics Pump station with electrohydraulic pressure and flow regulated pumps, and fixed delivery pumps. Energy-saving proportional hydraulics with precise flow and pressure control. Servo valve for injection speed, holding pressure, and back pressure control. ECODRIVE system – energy-efficient hydraulic drive enabling parallel auxiliary movements with minimal energy consumption. ENGEL Viper 40 Robot Integrated Cartesian robot, operated via CC200/RC200 control panel. Three servo-driven axes: X = 700 mm (extendable to 900 mm), Y = 1,000 mm (tandem up to 1,900 mm), Z = 1,880 mm (extendable up to 5,720 mm). Payload up to 17 kg, accuracy ±0.05 mm. C axis: 0–90° rotating gripper, pneumatic drive. B axis: rotation of head around lift axis (Y), servo motor drive, range +90° / –180°.

Condition: good (used), Year of construction: 2000, sheet width 3100 mm plate thickness 4.0 mm thickness at "Niro-steel" 2.5 mm cutting angle adjustment 1.0 ° back stop - adjustable 10 - 1000 mm adjustment speed 180 mm/s down holder 21 Stück strokes per minute 18 - 31 column arm 200 mm Control ELGO P8721 oil volume 160 L 0 max. 300 bar voltage 400 V main drive 7.5 kW Bodpfxozycpxo Abtjll weight of the machine ca. 4800 kg. dimensions of the machine ca. 3660 x 2070 x 2140 mm from a maintenance workshop good condition (!!) Features: - Electro-hydraulic sheet metal shear ("swing cut") - Machine frame = all-steel welded construction - ELGO NC control system, Model P8721, control panel on the front left * for positioning the electrically driven backgauge * Target/actual position value input possible * Adjustment via three-phase motor using a toothed belt - Support table with ball bearings * Recessed handles between the table plates - Front finger guard - Hydraulic sheet metal hold-down devices - 1x side stop with mm scale - 2x front support arms with mm scale - 1x freely movable foot switch - Emergency stop button at the front - 1x movable / rear scrap deflector - Original operating instructions Special accessories included: - EHT pneumatic sheet metal holding device for thin sheet metal blanks

Condition: ready for operation (used), Year of construction: 2000, operating hours: 85,542 h, travel distance X-axis: 600 mm, controller manufacturer: HEIDENHAIN, overall weight: 6,500 kg, spindle speed (max.): 16,000 rpm, number of axes: 5, This 5-axis HERMLE C 600 U was manufactured in 2000. It has a net weight of 6500 kg and includes a Knoll unit with internal cooling. If you are looking to get high-quality machining capabilities, consider the HERMLE C 600 U vertical machining centre we have for sale. Contact us for further details. - Spindle Operating Hours: 31,764 h- Internal Coolant Supply (IKZ) Pressure: 20 bar- Tool Taper: SK40- Operating Voltage: 400 V / 3-phase- Frequency: 50 Hz- Control Voltage: 24 V- Nominal Current: 63 A- Total Connected Load: 42 kVA- The folding roof needs replacement. Additional Equipment included: Knoll internal cooling system, approx. 200–300 pieces of various shrink-fit chucks (long & short), mandrels, collets, drill chucks Technical Specification Blsdpszyr Rlefx Abtjl Taper Size SK 40

Condition: used, Year of construction: 2008, · Working area X-Y-Z: 3,660 x 1,550 x 130 mm · Travel length X-Y: 4,200 x 2,000 mm Description of the units and accessories (base) The structure of the base body is a monolithic construction made of thick-walled steel. It is stiffened by welded triangular plates across the entire machine bed, making it extremely stable. The triangular shape used for load-bearing parts, with a large base, is the secret to ensuring lasting precision and stability. The machine layout allows the user an optimal workflow despite minimal space requirements. The base body constructed in this way therefore offers the machining unit a balanced and secure base with particularly good load distribution. The mobile unit carrier in gantry design is made of a solid monoblock. It is positioned in the X direction on prismatically ground guides via recirculating ball slides. The work unit is mounted on this mobile unit carrier on prismatic, ground guides and a recirculating ball slide. Axis movement: The drive system in the Y and Z axes is provided by ground, high-precision recirculating ball screws. The X-axis is driven by a backlash-free, preloaded precision rack and pinion drive. This ensures balanced load distribution during the positioning process. This characteristic is important for ensuring balanced movement even in more complex tasks. The various axes are driven by brushless three-phase servo motors/brushless AC motors. These offer excellent positioning speeds thanks to very short ramp times. Furthermore, the measuring system is fully integrated into these motors. These properties make this type of drive completely maintenance-free. · Rapid traverse in X: 40 m/min · Rapid traverse in Y: 60 m/min · Rapid traverse in Z: 22.5 m/min Vacuum system (basic) · Vacuum pump: 100 cbm/h · Power: 2.5 kW · Max. negative pressure (connection) 0.9 bar Control / control cabinet · Office PC or industrial PC (see options) · Basic NC control: ESA-GV KVARA 6.0 · Cable remote control with the most important functions ELECTRIC/ELECTRONIC CNC CONTROL Universal is equipped with a powerful NC control. The integrated office PC gives the NC control an unparalleled level of familiarity: the software runs on Windows XP and allows quick and easy programming, which is easy to learn even for inexperienced users. The system is open and allows the connection of CD-ROM drives, audio cards, barcode readers, modems, printers, scanning systems, etc. Furthermore, the installation of all network systems, as well as all commercially available CAD programs, is possible. To reduce space, the control cabinet is located under the machine table, and the operator works at a separate terminal on casters, which can be freely positioned. XILOG PROGRAMMING SYSTEM Software features: - Import of DXF files - Import of ASCII files - User interface in the operator's native language (available for languages I - GB - F - D - E) - Linear and circular interpolation in three axes, linear in space, spiral in the selected plane - Assisted programming - Calculator for direct transfer of calculated data - Graphic and syntax aids for drilling and milling operations - Parametric programming to perform the same panel machining on different Bledpfx Absvvi Rfotol

Condition: used, Year of construction: 2011, AXES Working area X-Y-Z axes * mm 3050-1300-180 Workpiece length in swivel machining mm 1390 Stroke X-Y-Z axes mm 3460-1735-250 Max. travel speed of the X-Y axes m/min 60 WORKING TABLE Number of workpiece supports and vacuum cups 6 / 2 Standard type Standard End stops / Position 1 / rear Vacuum pump m3/h 90/108 DRILLING UNIT Vertical spindles Std/Number/Speed 1/min 12 (8X-5Y) / 4000 Horizontal spindles Std/Number/Speed 1/min 6 (4X-2Y) / 4000 Integrated slotting/sawing unit in X Ømm/1/min 120 / 6000 Motor power kW (HP) 2.2(3) ELECTROSPINDLE Motor power Std. / Opt. (S6) kW (HP) 7.5(10) / 11(15) Max. speed 1/min 24000 Tool changer mounted on the unit carrier in X 4 positions, pneumatic INSTALLATION Installed power KVA 23÷28.5 Compressed air requirement Nl/min 450 Extraction air requirement m3/h 1900+1900 (3400) Required extraction air velocity m/sec 30 Extraction nozzle diameter mm 150+150 (200) Machine weight Kg 3000 * X Distance between the stops - Y Milling center as reference point; Z Workpiece passage GENERAL FEATURES CNC-controlled boring and milling center, in C-frame design and working table with adjustable workpiece supports and vacuum cups, for performing: - Vertical drilling on the surface of the panel - Horizontal drilling on all four sides of the workpiece - Slot milling with disc cutter in "X" direction - General milling operations Self-supporting structure and working table Structure made of a steel welded construction with the control cabinet integrated into the machine frame. Available in two different lengths and with standard workpiece supports or TV supports. Movable unit carrier Box construction made of cold-rolled steel with internal reinforcing ribs, protective devices with bumpers. Working unit Consisting of a drilling head with vertical spindles, horizontal spindles, an integrated slotting and sawing unit and an SCM electrospindle with tool quick-change system type HSK 63 F. Travel paths of the portal and the unit carrier Movement in the X, Y and Z axis takes place on linear prismatic ball-bearing guides with the aid of pre-tensioned linear guides. The power transmission of the X-axis (movable stand) takes place via a pre-tensioned, backlash-free rack and pinion drive with diagonal movement. The movement of the unit carrier in Y and Z direction takes place via pre-tensioned linear guides. The positioning of the working units and the control of the machine functions takes place via "Brushless" three-phase servomotors and digital drives. Bodpoyymz Uofx Abtell CNC CONTROL The control unit consists of a numerical control for the milling and drilling machines and a pre-connected personal computer with a graphical user interface "XILOG PLUS". PC -Office- operating system Windows XP - LCD color screen 17 - Qwerty keyboard - Swiveling control panel - Machine interface software Xilog Plus Xilog Plus features Programming - parametric, graphical and ISO programming - Import of DXF and ASCII files - Linear or circular interpolation in three axes, linear in space, spiral in the chosen plane - Supported programming with graphic and syntax aids for drilling and milling operations - Automatic optimization of drilling operations and tool changes - cycles - Possibility of plate zero-point shift for performing drilling on inclined or curved plate sides - Complete compatibility with CAD/CAM Routocam (SCM) - AlphaCam Integrated additional functions - Calculator for direct transfer of the calculated data.

Condition: used, Year of construction: 2018, Startech cn MAIN FEATURES FLEXIBLE AND CUSTOMIZED PRODUCTION COMBINED WITH SPEED AND PRECISION DRILLING FROM ABOVE WITH REFERENCE TO THE TOP OF THE PLATE ALLOWS ABSOLUTELY PRECISION MACHINING NUMERICAL CONTROL WITH 7" COLOR SCREEN: SIMPLE AND INTUITIVE TECHNICAL DATA Startech CN AXES Max. workpiece dimensions X-Y-Z mm 3050 x 800 x 50 Min. workpiece dimensions X-Y-Z mm 300 x 90 x 10 Drilling/slotting work area mm 0 x 800/0 x 800 X-axis stroke mm 750 Max. travel speed of the X-Y axes m / min 25 DRILLING UNIT Vertical spindles number 7 (4X-4Y one of them common) Horizontal spindles (along the Y axis) Number 2 (1+1) Horizontal spindles (along the X axis) Number 1 Fixed groove saw (direction) X Diameter of the groove saw mm 100 Max. thickness of the groove saw mm 5 Motor power kW (HP) 1.5 (2) Spindle speed rpm 3350 Speed of the groove saw rpm 4300 INSTALLATION Power supply V (Hz) 380 / 400 (50 / 60) Installed power KVA 4.5 Compressed air demand bar 6 Compressed air consumption Nl/cycle 90 Extraction demand m3 / h 1200 Extraction air speed m / sec 20 Extraction nozzle diameter mm 120 GENERAL CHARACTERISTICS Universal CNC drilling machine with work table with fixed gantry and movable workpiece for performing the following machining operations: - Vertical drilling on the panel surface - Horizontal drilling on all four sides of the workpiece - Groove Milling with integrated groove saw in the "X" direction. Self-supporting structure. Machine frame made of tubular steel to provide a large base for the work table. The structure is positioned on three self-leveling feet. The electrical control cabinet is integrated into the machine frame. "Easy Motion" central Bakelite support table: - an MDF sector for through-hole drilling, automatically pivoting for horizontal drilling - an infeed roller that facilitates panel loading - a rear roller conveyor that facilitates panel sliding - left and right stops - a central aligner with manual adjustment. The left and right stops are required to drill the two opposite sides of the panel horizontally in the "X" direction. Panel positioning along the X axis is achieved by means of suction cups. Unit support. This is a gantry structure made of tubular steel. The main machining unit is installed on the gantry. F10L drilling unit includes: - 7 independent vertical spindles - Drill chuck D10 mm - Distance between spindles 32 mm - 2 horizontal drilling heads, 1 in X direction with a single drill, 1 double drilling head in Y direction (1 + 1 drill chuck D10 mm) - Speed 3350 rpm - 1 integrated sawing unit in X (max. diameter 100 mm) - Saw blade speed 4300 rpm - Motor power 1.5 kW - Vertical pneumatic travel per spindle 70 mm - Horizontal pneumatic travel of the drilling unit Positioning of the workpiece and drive of the machining unit A CNC-controlled suction cup clamps the workpiece and positions it sequentially under the machining unit during machining. The movement in X and Y axis is carried out on THK guides with transmission on reinforced toothed Movement in Z axis is carried out pneumatically on "ball-bushing" guides with positioning on stop adjustable via the positioning of the working units is carried out via technology and drives with -CONTROL The control was specially developed for use Bledpfovwbp Asx Abtol