Decoilers for Coils

HESSE by COILTECH CMC S 500 300 M D1200

Condition: new, Year of construction: 2025, Single band console decoiler 500 mm - Loading capacity 1.500 kg - Inner φ 480-530 mm - with 4 clamping arms, ball bearings and with disc brakes Dsdpfxsfvbxqo Addjcr - max coil width: 500 mm

Condition: as good as new (ex-display), Year of construction: 2021, machine/vehicle number: 06 61 218, Comm. no.: Lg 32821 Single side decoiler BBT ABH 2000/400 exhibition machine, unused machine no.: 06 62 218 year of manufacture: 2021 Dcedjg U Utvjpfx Adder Technical data load capacity approx. max. 2.000 kg strip width max. 400 mm Coil inner diameter approx. 450 to 520 mm Coil outer diameter max. 1,500 mm Unwinding speed approx. 2 to 15 min.-1 With adjustable drive and loop control via ultrasonic sensor (analog). Drive by frequency-controlled three-phase geared motor. Spreading of the support segments manually by means of hand crank via joints Number of supporting segments 3 Coil side guide via strong limiting arms, clampable. Reel stand in strong box construction as welded design. construction. Additional equipment: Shutdown "belt loop too small" by antenna switch, attached to the column of the bottom housing of the loop control. Infinitely adjustable in height. Tape side guide at the bottom housing of the loop control, by means of lateral guide rods. The passage width is continuously adjustable.

Year of construction: 1986, condition: good (used), strip width: max. 200 mm strip thickness: 0,1 - 1 mm coil weight: 0,5 t mandrel Ø: 304 mm Dcedpfx Ajbh Ucbsddjr

Condition: refurbished (used), Year of construction: 2025, Drive: servo motor Belt width max. 300 mm Belt thickness 0.5 - 4.0 mm Cross-section max. 1,200 mm² Feed length 0 - 9,999.9 mm Accuracy + / - 0.05 mm Roller diameter 80 mm The feed rollers are hardened and ground. The top roller is lifted to feed in the strip via a pneumatic cylinder and valve. pneumatic cylinder and valve. The contact pressure of the top roller is applied pneumatically via short-stroke cylinders. The top roller is mounted in a torsion-resistant manner to prevent one-sided roller pressure. roller pressure is prevented. Off-center belt transport is permitted. Dcodjr H Dwiepfx Addjr An infeed roller basket, an adjustable lateral belt guide and a belt end belt end control on the infeed side are included in the standard version. included. Protective covers on the feed rollers and the drive elements. The intermediate lifting can be closed and switched off

Year of construction: 2023, condition: new, pressure 40 t throat 195 mm stroke 8-78 mm no. of strokes 76-190 Hub/min ram - range of adjustment 60 mm Dsdpfep Udupsx Addecr table surface area 650x380 mm table height 840 mm hole in the table Ø 110 mm ram surface 250x350 mm tool hole in ram Ø 40 mm total power requirement 3 kW weight of the machine ca. 2,2 t dimensions of the machine ca. BxTxH 1450x1220x2110 mm

Condition: new, Year of construction: 2025, Welded, robust bodies made of high-quality steel Easy manual material holding thanks to foot lock pedal operation Compliant with EU Safety Directives (CE Marked) User manual Working length: mm 7020 Bending angle: 135° Capacity (black sheet): mm 1 Djdpfsxlnpuex Addecr Main motor power: kW 2.2 Length: mm 7600 Width: mm 1000 Height: mm 1350 Weight: kg 31000

Condition: used, coil weight 2 x 0,15 t clamping range 265 - 485 mm band width 200 mm Thickness of sanding paper 0,1 - 4 mm total power requirement 0,25 kW weight of the machine ca. 180 kg dimensions of the machine ca. 1,2 x 0,9 x 1,2 m Dodpfscdrmisx Addecr - motorized double-turn coiler - newly painted

Condition: ready for operation (used), Year of construction: 1971, laoding capacity: max. 250 Kg. Dcodpfxedx Rzmj Addjr coil diameter: max. 650 kg. strip metal width: max. 100 mm

Condition: used, Year of construction: 1995, material width 300 mm coil weight 1,25 t Dcedpfxewc U Izj Addor material thickness 0,4 - 3,5 mm coil internal diameter 320 - 420 mm coil external diameter 1300 mm material cross-cut 750 mm² no. of straightening rolls 11 straightening roll diameter 60 mm number of draw-in rolls 4 roll diameter 60 mm speed 5 - 30 m/min power requirement 5,0 kW Weight 1,4 t Dimensions (WxDxH) 3,3 x 1,85 x 1,7 m Straightening machine (Type 1675-B11-FQ) with infinitely variable drive, driven straightening rolls, manual individual adjustment of the roller cassette, cntralized adjustment of the material width, outlet rolls Decoiler, single (Type 2350 B-FPS) not driven, with pneumatic lag break, hydraulic centralized expansion, pneumatic snubber roll coil loop control via sensor

Condition: used, Year of construction: 1995, material width 400 mm coil weight 2 x 2,0 t material thickness 0,4 - 3,0 mm coil internal diameter 460 - 530 mm coil external diameter 1500 mm material cross-cut 1200 mm² no. of straightening rolls 9 straightening roll diameter 30 mm speed 0 - 40 m/min power requirement 15,0 kW Weight 5,2 t Dimensions (WxDxH) 2,15 x 4,5 x 2,85 m - straightening machine type KRE 30.400/9 with infinitely variable drive, motoric adjustment of the roller cassette, rapid clamping device Dodpfov Svaxsx Addecr - double decoiler type 2000.2 H with pneumatic lag brake, hydraulic expansion, hydraulic snubber roll - coil loop control via ultrasound