Used Ball Srew for sale (3,202)

Condition: new, Year of construction: 2023, Stable cast iron construction Milling spindle can be swiveled backwards from 0° to -45° Right-left rotation of the milling spindle Generously dimensioned milling unit made of cast iron, attached directly to the table Solid and precise cast iron table Standard curved milling protection hood Aluminum sliding carriage ball contact system Torsion-resistant, highly precise, smooth-running and problem-free in daily use 10-year SCM guarantee on wear of the guideways Milling spindle mounted high up with precision ball bearings, resulting in the lowest possible bearing load and the longest possible service life Dcedpfx Ajiknp Reptol Exact router fence with quick adjustment and fine adjustment with a scale on the stop jaw Integrated suction connection Large milling table opening allows the use of larger tools Weight approx. 290 kg Extraction connection diameter 2 x 120 mm Working table L x W = 1000 x 435 mm Table height 900 mm Sliding carriage length 1000 mm Sliding carriage width 270 mm Drive motor power 5.0 kW, 400 V, 50 Hz Milling spindle inclination 0 to -45 ° Spindle usable length 100 mm Overhang max. above table 130 mm Spindle speeds 3500/7000/10000 rpm Mandrel diameter 30 mm Tool diameter max. lowerable 180 mm

Condition: used, offer consists of: New roller - for Stahlfolder/Heidelberg folders working width 56cm working width 66cm Djdpju Stcbjfx Aptjcl working width 78cm ball-bearing for rollers: working width 40-94 cm We can also organize the following for you: packaging, loading, transport ( by ship or plane) including customs

Condition: used, offer consists of: New roller - for Stahlfolder/Heidelberg folders working width 56cm - 330€ / pc. working width 66cm - 365€ / pc. Dedpfxoxr Adto Aptocl working width 78cm - 400€ / pc. ball-bearing for rollers: working width 40-94 cm - 28€ / pc. We can also organize the following for you: packaging, loading, transport ( by ship or plane) including customs

Condition: used, offer consists of: New roller included ball-bearing - for Horizon folders working width 54-56cm - 400€ / pc. We can also organize the following for you: Dedpfxjxr Ad To Aptscl packaging, loading, transport ( by ship or plane) including customs

Condition: excellent (used), Planing width 520 mm Min./Max. working height 3 – 240 mm Motor power 5.5 kW, 400 V, 50 Hz Speed of planing shaft 4500 rpm Dcjdpfx Apsy Egmustjl Diameter of planing shaft 120 mm Planing knives 4 pcs Dimensions of thickness table 520 x 850 mm Feed rate 6.5 / 10 / 13 / 17 m/min Dust extraction diameter 150 mm Electric height adjustment Handwheel for fine adjustment of thickness table height Spiral-toothed steel feed roller Segmented pressure bar 2 steel extraction rollers Table roller Low voltage release Emergency stop switch Knife setting gauge Test report for conformity with Section 4 of the AM-VO NEW V-belts NEW BALL BEARINGS NEW PLANING KNIVES Dimensions approx. L x W x H = 1120 x 990 x 1000 mm Weight approx. 600 kg Note on used machines: • Subject to errors in technical specifications and prior sale. • Prices quoted are ex-works, pick-up only – free loading! • The machine has been cleaned and function-tested. • All machines are sold as seen, without any warranty claims. The buyer is free to inspect the machines at our location. • Special agreements are only possible in written form. (We will only answer inquiries if you provide your address and telephone number!)

Condition: used, Year of construction: 2019, Second-hand machine Year of manufacture: 2019 Only 110 operating hours! Features and technical specifications: Machining paths: - X = 1800 mm - Y = 900 mm Dodpfxezk Npgj Aptjcl - Z = 80 mm Made from 18 mm Koskisen boards Milling bed made from 19 mm MDF as a sacrificial plate with guide rails and slot blocks, used as a clamping method. Base frame with bracing, cast in polymer concrete, prepared for transport by pallet truck or forklift. Mechanical kit comprising profile guides including guide carriages, as well as ball screws 2010 and 1605 for all axes. Shaft couplings and high-performance grease for lubricating the individual carriages, as well as energy chains including connection sets. Control kit comprising a Triple Beast for controlling 3 axes, with an Ethernet connection. Leadshine driver board for the fourth motor. Four stepper motors, 5.0 A, 3 Nm, with motor cables, plus a switching power supply rated at 48 V, 6.7 A, LED board for breakout board, ribbon cable and proximity sensors, small parts such as wires, wire end ferrules, control cable, heat-shrink tubing and cable lugs. Fully installed in an aluminium housing, including electrical kit and emergency stop. - 21.5-inch monitor as a built-in display, including a mini PC with Windows 7, Rhino 5.0 CAD software, Estlcam G-code generator, Beamicon2 control software, as well as a mouse and keyboard, pre-installed in an ergonomic console. Tool length sensor for determining the length and adjusting the active zero-point offset. Optional extras: - High-frequency spindle with 2.2 kW, including union nut, frequency converter, mains filter, braking resistor and collet set. - PC with 8 GB RAM and AMD processor - Rhino 5.0 CAD software for creating both simple 2D data and 3D solid models Availability: at short notice Storage location: Flörsheim

Condition: ready for operation (used), Year of construction: 1999, spindle motor power: 13,500 W, spindle speed (max.): 7,500 rpm, overall weight: 8,000 kg, controller manufacturer: SIEMENS, controller model: 840D, This 3-axis HULLER HILLE DVH 150 Duo vertical turning machine was manufactured in 1999. It features a maximum turning diameter of 160 mm and a swing diameter of 200 mm. Equipped with a Siemens 840D CNC control, it offers high precision and efficiency with speeds up to 7500 rpm and rapid traverse rates up to 60,000 mm/min. Ideal for complex turning tasks, the HULLER HILLE DVH 150 Duo machine we have for sale. Contact us for further details. Additional equipment • Central lubrication system Machine Benefits Technical Machine Benefits • X-axis: roller guide / z-axis: glide guide Dodpfx Apozwvzistocl • X-axis roller guide and z-axis glide guide, maximum axis speeds: x-axis 60,000 mm/min, z-axis 30,000 mm/min, maximum feed rate: 30,000 mm/min, maximum rapid traverse: 60,000 mm/min • Maximum swing diameter: 200 mm / maximum workpiece and chuck height: 220 mm • Spindle diameter in front bearing: 80 mm • Machine connection power: 45 kw • Ball screw pitch: x-axis 20 mm, z-axis 10 mm • Central lubrication interval: 15,000 m, amount: 4 cycles

Condition: new, #K CNC Lathe Müga Type / Model iUltimate i42-2s Control Mitsubishi M830 Condition New #ABAN Technical Data Axes: "10 NC Axes" Main Spindle: X1, Y1, Z1, C1, B1 Counter Spindle: X2, Y2, Z2, C2, B2 Description Main Spindle Spindle Speed 6000 rpm Motor 7.5/11 kW Chuck 173E A5 spindle nose Spindle Bore 42 mm Driven Tools 12, 1.5 kW, 4000 rpm Tool Holder ER 20 OD Tool Holder 20 mm x 6 pcs ID Tool Holder 20 mm x 5 pcs X/Y/Z Travel Ø 300 / Ø 770 / 250 mm Servo Motor 1.5 kW Rapid Traverse 30 m/min Hydraulic Motor 0.75 kW, 75 l Coolant Pump 1.5 kW, 240 l, 5 bar, 75 l B Axis Motor 0.75 kW, 360° C Axis braked Description Counter Spindle Spindle Speed 6000 rpm Motor 2.2/3.75 kW, built-in Chuck 173E A5 spindle nose Spindle Bore 30 mm Driven Tools 12, 1.5 kW, 4000 rpm Tool Holder ER 20 OD Tool Holder 20 mm x 5 pcs ID Tool Holder 20 mm x 9 pcs + extension. X/Y/Z Travel Ø 900 / Ø 770 / 300 mm Servo Motor 1.5 kW Rapid Traverse 30 m/min Coolant Pump 2.0 kW, 25 bar, 30 l Part Ejector Pneumatic B Axis Motor 0.75 kW, 360° C Axis braked Total Tools 49 Dimensions L x W x H approx. 3.8 m x 2 m x 2 m Weight approx. 5600 kg Travels Rapid Traverse X1 Ø 300 mm 30000 mm/min Y1 Ø 770 mm 30000 mm/min Z1 250 mm 30000 mm/min X2 Ø 900 mm 30000 mm/min Y2 Ø 770 30000 mm/min Z2 300 mm 30000 mm/min C1 360° 60 rpm C2 360° 60 rpm B1 360° 30 rpm B2 360° 30 rpm Features: Linear axes with servo motors The 6 linear axes are equipped with Mitsubishi servo motors and directly coupled to the ball screw. This ensures maximum accuracy. Simultaneous machining on main and counter spindle Two programs (workpiece front and back) can be processed independently on the main and counter spindle. Synchronous part removal The workpiece can be removed during rotation, so that one workpiece can be machined while another is being removed. B-axis inclined machining The iUltimate is equipped with two swivel heads on the main and counter spindle, allowing for machining on both sides at an angle. Equipment: Swiveling control panel Driven tools Workpiece clamping device Workpiece conveyor belt Extendable chip conveyor Coolant system 4x internal coolant for main spindle Intelligent handwheel Collet chuck 173 E Interface for bar loader Dedpfx Aozv Thkeptscl C-axis main and counter spindle Disc brake for C-axis main and counter spindle Y-axis main and counter spindle Central lubrication Work area light Signal light on the machine Control cabinet heat exchanger Mounting elements various tools

Condition: reconditioned (used), functionality: fully functional, Year of construction: 2018, controller model: Rexroth IndraMotion MTX, laser type: CO₂ laser, laser power: 3,200 W, punching force: 22 t, Standard equipment: Machine - Work area 3050 x 1550 mm - Drives with maintenance-free three-phase motors - Stable, easily accessible C-frame - Coordinate guidance - Linear magazine with 25 positions for clamping dies and tools - Follow-up device with programmable pressure clamp - Flap for stamped parts 500 x 500 mm incl. sensor - 2 scrap containers (=> not included with part conveyor belts) - Foot pedal for die closing - FocusLine - NitroLine - FastLine - FlyLine - PlasmaLine - Additional Xp and Yp axis - Ejection cylinder for laser parts - Fast flap for laser parts 500x500 mm incl. sensor - Adjustable laser cutting support - Slag cone detection TRUMPF Laser - Laser TruFlow 2700 incl. LensLine and optimized standby mode - High-frequency excitation - Closed beam guidance - Fine filtration of compressed air for beam pipe ventilation Cutting Head - Lens cutting head with 170 mm focal length - Universal cutting head quick-change device (UTI) - LensLine with condition monitoring - ControlLine Punching Head - Electro-hydraulic punching head - Rotatable mono-tool holder - Programmable pressure clamp position - Tool length compensation - Scrap extraction - Calculation of filling level in the punching console - Stroke counter for punches - Spray lubrication for punches - Level monitoring for tool lubrication Control System - Open control system based on Bosch Rexroth IntraMotion MTX - Integrated technology data - 160 GB hard drive capacity - External control panel with 15" TFT touchscreen - Programmable cutting gas pressure - Teleservice interface via the internet - Automatic shutdown with wake-up function - Production plan Data Transfer - USB interface - RJ45 network connection - Wireless Operation Point (basis for Visual Online Support) Safety - CE marking - Multi-beam light barriers - Rapid shutdown of drives - Warping detection Dcsdozv Twxjpfx Aptel - Protection against stray radiation - Compact dust extraction system Extended Standard Equipment - Hydraulic clamping die (4 pieces) - Ball tables (=> not included with brush tables) - Chip container (=> not included with chip conveyor) - Cooling unit (water-air) + Laser TruFlow 3200 incl. LensLine and optimized standby mode + MultiTool function + Thread forming function + MultiShear function + Roll technology function + Softpunch function + StripLine function + Active die + Height-adjustable clamping die (4 pieces) + Follow-up cylinder - Vibration-damped installation + Chip conveyor with tilting container + Brush tables with loading and unloading assistance SheetMaster N0140A0054 automation: - Suction frame with 36 suction cups (y-axis = 400 mm) - Movable suction bars (v-axis = 170 mm) - Peeling suction cup - Vacuum sensor - Sheet thickness gauge for double-sheet detection - Central lubrication - TRUMPF control system based on Rexroth IndraMotion MTX - Automatic die closing of the machine + Extended guide rail + Table extension (brush design) + Fixed additional support table on the left (brush design) + Automatically adjustable additional support table on the right (brush design) + Large C-frame for processing oversized parts + Parallel loading and unloading of the SheetMaster during main processing time + Unloading monitoring + Lowerable GripMaster for large formats (3000 x 1500mm) + Scissor lift table (3000 x 1500)

Condition: excellent (used), Year of construction: 2016, functionality: fully functional, operating hours: 750 h, power: 9 kW (12.24 HP), input voltage: 430 V, number of axes: 4, number of slots in tool magazine: 10, controller manufacturer: Yaskawa, total height: 800 mm, table length: 4,000 mm, table width: 2,000 mm, Machine purchased from the manufacturer Plot Electronic in 2016. Used for milling models and molds in materials: MDF, polyurethane. In 2022 it was upgraded with the addition of a 4th axis and an oscillating head. Dodozxqtpepfx Aptjcl Full technical specification of the machine: - Stable welded construction with an annealed gantry made in hybrid monolith technology - Mechanics – linear guides, ball carriages - Helical rack and pinion system - Spindle with tool changer, 9kW, ISO 30, ER 32 - Linear tool magazine holds 10 tools - Drives – AS servo drives - CNCGraf control module in Polish - Simulation possible before machining, real-time cutting visualization - Material height sensor - Tool length sensor - Spindle cooling system – compressed air - Control cabinet with computer and keyboard - Vacuum table - T3000K oscillating head - 4th rotary axis on a tailstock, mountable on the table - Spindle speed control system

Condition: not inspected (used), Number of sanding units 4 St sanding width 190 mm Sanding height max. 4-180 mm weight 4200 kg Hess Expert 4-belt single wood sanding machine machine will be checked by our technicians ----- Ø Grinding at the bottom/top Ø With 2 offset grinding units each (bottom and top) Ø Grinding units (bottom and top) connected in series according to the Dcodpfx Aot Tqy Eeptel Dressing principle Ø Pre-sanding with coarse grit (calibrate) Ø Regrinding with fine grit (finish) Ø Central motorized height adjustment of the lower grinding units Ø Central motorized and synchronous height adjustment of the entire upper Grinding and brushing units including the upper transport units Ø Oscillating sanding belt utilization (during the sanding process) Ø Absolute power connection thanks to 5.5 KW motors and large dimensions drive drums Ø Oxide ceramic grinding shoe for - exact surface geometry - no adjustment work - permanent dimensional accuracy - completely maintenance and wear-free Basic structure: Stable, heavy welded construction made of strong-walled rectangular profiles additional, statically calculated reinforcements for optimal Vibration dampening. Staggered grinding units with large dimensions Belt drive drums for slip-free belt running. Two-point suction for direct and flying dust with sealing brushes and integrated sanding belt blow-off Device to increase the service life of the sanding belts. Grinding units in heavy steel plate construction as the basis for vibration-damped, quiet tape running. Absolutely backlash-free guides as ball linear sets hardened and ground shafts. Height adjustment of the grinding units via hardened and ground special linear guides as well as pre-tensioned ones Guide carriage. Permanent precision thanks to dust and dirt protection Ball linear sets and guide carriages. Large-sized pre-grinding rollers as contact rollers. Contact rollers and Sanding shoes in a balanced ratio to the sanding belt grain load. The large drive drums guarantee full transmission the 5.5 kW drive power of the grinding motors on the sanding belt. Therefore Slip-free, stable running and optimal heat dissipation. This makes it the strongest Chip removal possible. Automatic machine stop activation in the event of a belt break. Visual display on the control panel and via flashing lights on the machine. Sanding shoes for finish completely maintenance-free and wear-free made of oxide ceramic with optimal heat dissipation. Grinding belt tension via appropriately sized compression springs. Sanding belt relaxation for belt changing using a pneumatic device sensitive, distortion-free placement of new tapes. Upper grinding unit and brush device centrally motorized Height adjustable with digital display in the control panel for the motorized Grinding thickness adjustment. Brushing and finishing device, for better surface finish, integrated into the basic machine. Two special brush rollers 150 mm Æ arranged one above the other in synchronous function for advance thrust. Separate height adjustment of the brush rollers on precise Carriage guides for post-correction of wear. Additional transport roller for Removal or further transport of the workpiece from the automatic grinding machine with the conveyor belt. Wooden guide in the inlet area for hard guide and bearings mounted on both sides pressure rollers. Safe transport of profiled workpieces on ca...

Condition: good (used), Year of construction: 1998, Ref. -No.: 10583 Manufacturer: MTE Type: BF 4200 Year of construction: 1998 Type of control: CNC-Steuerung Control: Heidenhain TNC 426 Storage location: Halberstadt Country of origin: Germany X-Travel: 4000 mm Y-Travel: 1200 mm Z-Travel: 1500 mm Turning Speeds: 2.500 RPM Rapid Traverse X/Y/Z: 400 m / min Table surface area (LxW): 4200 x 1000 mm Tool changer: 40 Dcodpszx Nybefx Aptsl Table load max.: 13.000 kg Tool Taper: SK 50 Weight: 20 t Number Of T-Slots: 7 Pcs Width of the T-slots: 22 mm Distance between the grooves: 140 mm Further information: - Heidenhain HR410 handwheel - 3D scanner, infrared - The ball screw on axes Z and Y runs clamped and supported on combined radial/axial roller bearings and radial ball bearings with 250 N/sqm stiffness. The machine can be viewed while powered up.

Condition: used, mileage: 58,000 km, power: 140 kW (190.35 HP), first registration: 12/2023, fuel type: diesel, overall weight: 3,100 kg, fuel: diesel, color: white, gearing type: automatic, emission class: euro6, suspension: steel, number of seats: 7, Equipment: ABS, air conditioning, airbag, central locking, cruise control, immobilizer system, navigation system, onboard computer, parking heater, parking sensors, power assisted steering, seat heater, sliding door, soot filter, traction control, E07 Hill-start assist, CF8 Sports suspension, Z3N Night package, Q50 Trailer coupling with detachable ball head, FB4 AMG rear spoiler lip, ZK9 Pop-up roof, JA7 Blind Spot Assist, T56 Electric operation for sliding door, left, T55 Electric operation for sliding door, right, EY5 Mercedes-Benz emergency call system, BS1 Brake calipers with Mercedes-Benz lettering, EY6 Breakdown assistance, JS1 360-degree camera, FK4 Black painted radiator grille, LG2 LED Intelligent Light System, R1U AMG light-alloy wheels 8 J x 19, black, LG4 Tail light, brake light and turn signal in LED technology, LG8 High beam assist PLUS, EZ6 Parking package with 360-degree camera, XO7 Mercedes-Benz Mobilo with roadside assistance and extended warranty, EZ8 PARKTRONIC, SE5 Lumbar support for driver's seat, SE4 Lumbar support for passenger's seat, QA4 Towing capacity 2500 kg, T70 Child safety lock on doors in the passenger compartment, ZC6 Sales code 1, T74 Grab handle for entry, Y10 First-aid kit, MJ8 ECO start/stop function, IB6 Model series C447 Vito/V-Class, VL7 AMG floor mats, H00 Warm air duct to the passenger compartment, YS1 Sleeping pad for lower bed, Z42 Approval as a passenger car, C70 Pedestrian protection, C74 Illuminated Mercedes-Benz lettering on the door entry, H12 Auxiliary hot water heating, J55 Seatbelt warning system for passenger seat, H16 Seat heating for driver, H15 Seat heating for passenger, XA8 Weight variant 3,100 kg, EL9 2-way speakers front and rear, JF1 Rain sensor, RF1 Tire brand Continental (10), SH2 Thorax-pelvis sidebag for passenger, SH1 Thorax-pelvis sidebag for driver, SH9 Windowbags for driver and passenger, H20 Heat-insulating glass all around, JW5 Lane keeping assist, JW8 ATTENTION ASSIST, PS2 AMG Line, Y44 Warning triangle, JX2 Service interval 40,000 km, FP3 Mirror package, BH1 HOLD function, SZ8 Stowage net on passenger seat back. We can be reached by phone Monday to Friday until 8:00 p.m. and on Saturdays until 4:00 p.m.! Furthermore:!! Leasing/financing and trade-in possible!! !! !! -Errors and prior sales excepted!! -All information without guarantee ... more on our website. Djdpfx Ajzy N Nfeptecl

Condition: ready for operation (used), Year of construction: 2025, machine/vehicle number: 3401721031, functionality: fully functional, operating hours: 35 h, power: 4.5 kW (6.12 HP), input voltage: 400 V, input frequency: 50 Hz, type of input current: three-phase, cutting height (max.): 340 mm, cutting width (max.): 500 mm, control type: CNC control, roller diameter: 340 mm, pivoting range: 60 °, actuation type: electric, rotational speed (max.): 15 rpm, rotational speed (min.): 150 rpm, total height: 1,870 mm, total length: 3,000 mm, total width: 3,000 mm, overall weight: 2,150 kg, table height: 800 mm, year of last overhaul: 2026, Equipment: CE marking, documentation/manual, lighting, motor brake, rotational speed infinitely variable, History, 6-Month Warranty We offer for sale a professional CNC automatic band saw for metal cutting, PEGAS 340 KATANA X-CNC-LR, designed for both automatic and angular cutting operations in metalworking and fabrication industries. This is not a standard used machine from a production environment. The saw was used as a manufacturer's demonstration machine and has accumulated only approximately 1,000 operating hours since 2017. It has a fully documented history, has been professionally maintained throughout its service life, and remains in excellent technical condition with minimal wear. Main Features Dcsdpfszg Hviex Aptol ✔ Fully automatic CNC operation ✔ Automatic programmable miter cutting ✔ Saw frame swiveling range from +60° to -45° ✔ Automatic material feed system ✔ Precision ball screw drives ✔ Siemens CNC control system ✔ Cutting program storage and management ✔ Heavy-duty industrial design for long-term operation Key Advantages Only 1,000 Operating Hours Exceptionally low operating time for a machine of this age, reflecting its use as a demonstration unit rather than in continuous production. Manufacturer Demonstration Machine Clear origin, documented service history, and professional maintenance by the manufacturer. 6-Month Warranty Additional peace of mind when purchasing a used machine. Immediate Availability Ready for immediate installation and operation. Significant Cost Savings Acquire a modern CNC band saw at a fraction of the cost of a new machine while maintaining high productivity and cutting accuracy. Demonstration Available The machine can be inspected and tested under power prior to purchase. Machine Condition Fully operational Regularly serviced Approx. 1,000 operating hours Ready for immediate use Available for inspection in Slavkov u Brna, Czech Republic A brand-new machine with full manufacturer's warranty can also be supplied upon request.

Condition: used, Year of construction: 2008, Automatic vertical precision panel saw, - Self-supporting, welded, torsion-resistant frame construction, with hardened guides. - Support rollers with ball bearings, with automatic locking, number: 17 - Automatic movable WOOD workpiece support throughout the cutting area. - Support for small workpieces integrated into the frame. - Closed dust extraction system TRK integrated into the frame. - Divided center support for optimal working height, length: 5.15 m - Saw beam with automatic locking for vertical sawing. - Fine adjustment of the saw motor using a push button. - Automatic locking of the saw motor during horizontal sawing. - Automatic lowering of motor/saw blade. - Automatic pivoting of motor/saw blade. - Back cut: 15 mm - Infinitely adjustable automatic feed rate from: 10 - 25 m/min - SPS control with display, diagnostic system, check control and hour meter. - Powerful, vibration-free motor with motor brake: 7.5 hp - Supersilent system for noise reduction. - Digital measuring system (DMS) for horizontal and vertical sawing. - Switch for support rollers or center support. Quick and easy adjustment of reference dimensions. Switch for strip cutting. - Adjustable measuring accuracy: 1.0/0.5/0.1 mm - Auxiliary fence on profile rail with measuring tape, number: 3 - SPS control with display, diagnostic system, check control and hour meter. - Must be connected to an external dust extraction system and compressed air. Striebig ”CONTROL 6224”, continued… - Incl. mounting kit for wall mounting. - Cutting area: Length: 5300 mm - Height: 2240/2100 mm - Depth: 80 mm Incl. the following optional equipment delivered with the machine: - Scoring unit “VSA” with infinitely adjustable cutting width and automatic on/off function, incl. scoring blade. - Electronic positioning system "EPS", in the horizontal axis. (out of order, needs repair) Dcsdpfxezy Ik Uo Aptol Available from the beginning of November 2026.

Condition: excellent (used), Year of construction: 2011, ENGEL DUO 5550/1100 Injection Moulding Machine Year of manufacture: 2011 Injection unit Two short-barrel cylinders for plastic injection. Direct screw drive; ceramic heaters on cylinders. Standard screw geometry L/D = 22. Hardened and nitrided screw, diameter Ø 90 mm. Maximum injection volume: 2,740 cm³. Maximum shot weight (PS): 2,520 g. Open nozzle: front radius R = 35 mm, channel diameter Ø 6 mm, mounting thread M55×3. Increased specific injection pressure: 2,180 bar. Dcjdpfx Apew U Taxstsl Plasticizing capacity: 85 g/s (for polystyrene, screw Ø 90 mm). Injection unit equipment: M3-type barrel – bimetallic, increased corrosion and wear resistance, permissible temperature up to 350°C. S4V-type screw – heat-treated, chrome-plated, with armoured edges; increased resistance to corrosion and wear. Special G11.3 screw geometry optimized for processing. R12 non-return valve (multi-ball, recommended for PC, PMMA, ABS). Clamping unit (clamping system) Hydromechanical dual-platen clamping system. Four short high-pressure cylinders on the nozzle side. Four tie-bar tensioners on the ejector side. Two diagonally mounted fast movement cylinders on the clamp unit. Opening stroke dependent on mould height (dynamic stroke adjustment). Moving platen guided on the machine frame – ensures platen rigidity and parallelism. Clamping force: 11,000 kN. Mould mounting platen dimensions: 1,850 × 1,810 mm. Tie bar spacing: 1,400 × 1,150 mm. Mould mounting height: 600–1,200 mm. Maximum opening stroke: 1,800 mm. Mould cooling system: 10 water circuits with rotameters (max. 30 l/min each). Special execution of platens with additional holes for ejector systems in two arrangements (horizontal and vertical). Core pull drives (core pull systems) Independent hydraulic core pull drives: 2 units on the moving platen, 2 units on the fixed platen. Hydraulic pressure reduction systems for core pulls. Independent pneumatic core pull drive on the moving and fixed platens. Hydraulics Pump station with electrohydraulic pressure and flow regulated pumps, and fixed delivery pumps. Energy-saving proportional hydraulics with precise flow and pressure control. Servo valve for injection speed, holding pressure, and back pressure control. ECODRIVE system – energy-efficient hydraulic drive enabling parallel auxiliary movements with minimal energy consumption. ENGEL Viper 40 Robot Integrated Cartesian robot, operated via CC200/RC200 control panel. Three servo-driven axes: X = 700 mm (extendable to 900 mm), Y = 1,000 mm (tandem up to 1,900 mm), Z = 1,880 mm (extendable up to 5,720 mm). Payload up to 17 kg, accuracy ±0.05 mm. C axis: 0–90° rotating gripper, pneumatic drive. B axis: rotation of head around lift axis (Y), servo motor drive, range +90° / –180°.

Condition: used, mileage: 63,831 km, power: 120 kW (163.15 HP), first registration: 06/2021, fuel type: diesel, overall weight: 3,100 kg, next inspection (TÜV): 06/2027, fuel: diesel, CO₂ emissions: 166 g/km, fuel consumption (urban): 7 l/100km, fuel consumption (extra-urban): 5.9 l/100km, fuel consumption (combined): 6.3 l/100km, color: green, gearing type: automatic, emission class: euro6, suspension: steel, number of seats: 8, Equipment: ABS, air conditioning, airbag, central locking, cruise control, immobilizer system, onboard computer, parking heater, parking sensors, power assisted steering, seat heater, sliding door, soot filter, traction control, E07 Hill-start assist, Q50 Trailer coupling with detachable ball head, FR8 Rear-view camera, EY5 Mercedes-Benz emergency call system, EY6 Breakdown assistance, G43 9G-TRONIC, CM2 Bumpers and trim painted in vehicle color, FS5 Illuminated mirrors for sun visors, JK3 Instrument cluster with pixel matrix display, V23 Interior trim, premium version, EA4 Audio 40, EZ5 Parking package, XO9 Mercedes-Benz MobiloVan with roadside assistance and extended warranty, T70 Child safety lock on doors in the passenger compartment, T74 Grab handle for entry, CF7 Comfort chassis, UR1 Seat rail system with quick-release mechanism, HH9 Semi-automatic climate control system TEMPMATIC, V36 Headliner, E1D Digital radio (DAB), Y10 First-aid kit, MJ8 ECO start-stop function, RL5 Light alloy wheels 6.5 J x 16, IB6 Model series C447 Vito/V-Class, VL2 Velour floor mats, ES3 12V sockets for seat rows in the rear, right and left, H00 Warm air duct to the passenger compartment, F48 Heater for windshield washer system, HI1 Climate zone 1 (cold/comfort), V41 Plastic floor covering TPO in the passenger compartment, RM0 All-season tires, US5 3-seater comfort bench seat EASY-ENTRY in the 2nd row in the rear, US4 3-seater comfort bench seat EASY-ENTRY in the 1st row in the rear, W65 Tailgate, Z42 Approval as a passenger car, LA2 Headlight assist, C70 Pedestrian protection, HZ0 Electric auxiliary heater, ZM4 Combined vehicle, ET4 Active Distance Assist DISTRONIC, E34 Buffer battery for starting, H12 Hot water auxiliary heater, J55 Seatbelt warning system for passenger seat, XA8 Weight variant 3,100 kg, W70 Tinted glass in the rear, black, EL9 2-way speakers front and rear, F., We will be happy to calculate an individual financing or leasing offer for you and accept your used vehicle in part exchange. We look forward to welcoming you to our dealership for further consultation. Vehicle condition according to age / mileage, touch-up paintwork was carried out on the vehicle as part of the preparation. No liability for printing and typographical errors. Errors and prior sale excepted ... more on our homepage. Dcjdpfxezyyrdj Aptol

Condition: used, mileage: 4,121 km, power: 90 kW (122.37 HP), first registration: 07/2015, overall weight: 5,700 kg, fuel type: diesel, color: orange, gearing type: automatic, emission class: euro5, loading space width: 1,600 mm, loading space length: 2,050 mm, loading space height: 400 mm, Year of construction: 2015, total length: 4,735 mm, total width: 1,710 mm, total height: 2,210 mm, number of seats: 2, Equipment: ABS, air conditioning, all wheel drive, electronic stability program (ESP), soot filter, Multicar M31 FUMO-Carrier H Tipper Hydrostat 4x4 Short Wheelbase 3.0L Diesel Engine 90KW/122HP Euro 5 with Large Municipal Hydraulics in Municipal Orange RAL 2011 ---- First registration: 08.07.2015 Mileage: 4,121 km Operating hours vehicle: 361 h Operating hours hydraulics: 349 h Dsdpfexrh Absx Aptjcl Previous owner: Municipal vehicle, 1st hand ---- * Iveco Engine 3.0L 90KW/122HP EURO 5 with DPF * Permitted gross weight 5,700 KG * Standard cab * Air conditioning * Three-way tipper with excavator guard (raised bulkhead) * Ball-type trailer hitch - towing capacity 3,500 KG * Pin-type trailer hitch - towing capacity 3,500 KG * Switchable all-wheel drive with mechanical differential lock and reduction gear * Large municipal hydraulic system * Rear hydraulic connections * Front leak oil line, front socket * Equipment control panel kit with power supply * 2x yellow warning beacons * Heated and electrically adjustable exterior mirrors * Electric windows * Cruise control * Tachograph * Lighting bar on cab roof with additional dipped beam and work lights (for front-mounted equipment use) * Adjustable ISRI comfort air suspension driver's seat * Adjustable ISRI comfort air suspension passenger seat * Front mounting plate for front attachments Quick-change system SWV 500 * Wide tires 285/65R16C with Goodyear winter tires as new condition Winter service equipment at extra cost: * New professional snow plow for municipal use, width 2.00 m or 2.20 m * Used snow plows in various widths * Used front-mounted brooms in various widths ---- Immediately ready-to-drive and operational vehicle from first owner, in very good condition - General Inspection/emissions test as well as service and oil change will be carried out before sale Your contact for this vehicle: Daniel Seidler Tel: Mobile: also WhatsApp Email: ---- Errors and changes excepted!

Condition: like new (used), functionality: fully functional, machine/vehicle number: WFDFLT22001014840, empty load weight: 4,000 kg, maximum load weight: 16,000 kg, overall weight: 20,000 kg, axle configuration: 2 axles, loading space length: 7,000 mm, loading space width: 2,480 mm, total length: 9,975 mm, total width: 2,550 mm, total height: 1,000 mm, suspension: air, tire size: 235/75 R17,5", tire condition: 100 %, Year of construction: 2026, Equipment: center pivot plate, Archive photos - actual vehicle may differ #Container locking system 2 pairs of locking hooks recessed into the floor Pneumatic actuation Low-tension locking system, clamping force 6 t per claw Genuine original for 30+ years 2-point internal container locking; skip containers with internal ridge not lockable (for skip containers with sub-frame to DIN 30722, rear-loaded) Note: push container fully flat at the front roller recess Longitudinal guide rails, laterally adjustable/removable, approx. 115 mm high Turntable with heavy-duty ball-bearing slewing ring 8 pairs lashing points, top/side, outer frame, 5 t each 7 pairs combi stake pockets, bolted ring eyes, 5 t each, outer frame, approx. 72x42 mm (usable w/ plug-in stakes; fitted stakes block 5 t eyes) 1 lockable plastic tool box, W=600 / H=425 / D=460 mm 1 open storage box for container net Turntable trailer towing gear Drawbar with certified 40 mm tow eye Lowerable Y-shaped drawbar, pneumatic raise/lower assist (for Absetzcontainer transport, rear-loaded) #Axles & suspension BPW or SAF drum-brake axles, manufacturer's choice Laser-aligned axles/running gear - reduces tyre wear and fuel use Axle grease points extended outward Air suspension with raise/lower valve Air-bellows pressure gauge #Wheels & tyres 235/75 R 17.5, manufacturer's choice Steel wheels, twin arrangement, factory silver TPMS to ECE R 141, shown via EBS on tow display, no truck install (pre-equipped; standard tyres only) #Braking system 2-line air braking system Spring-loaded parking brake Axle load detection via EBS CAN-bus, cab display; truck pre-equipped, no install (not a calibrated scale) Vehicle driving stability system Front Duomatic connection, with line to towing vehicle 24V EBS electronic braking system, front EBS connector and cable Caution: tow only with vehicles that guarantee ABS effectiveness #Electrics Dedjzy Rw Repfx Aptecl 24V LED multi-chamber lamps; yellow LED side lights; LED plate light (false diagnostics possible on some tow vehicles) Yellow LED side lights coupled with indicator (flashing side lights) 2 white LED front position lights 2 white/red LED rear outline marker lights 1 x 15-pin front connector, with connecting cable Parking sockets for electrics, air and EBS on the drawbar Additional rear LED work light, via reversing light LED beacon with mount, switched via sidelight (lamp removable) LED work lights both sides, via reversing light #Floor Steel floor Front roller recess in floor for skip containers 5,000-7,000 mm long Note: slight floor waviness possible due to welding distortion #Loading ramps Lockable storage space for loading ramps beneath the load bed 1 pr aluminium ramps ca. 3,000x450 mm, 14,000 kg/pair (not for steel chains/tyres; rear rail) #Country of registration / plates Country of registration: Germany With Dekra inspection and report (per §13 EG-FGV) Contour marking, reflective tape to ECE R 048, white sides/red rear

Condition: new, pressure 175 t chamfer lenght 4100 mm distance between columns 3600 mm column arm 410 mm ram stroke speed 180 mm/sec work speed 12.0 mm/sec return speed 190 mm/sec work stroke 275 mm Dedpfxexaah Sj Aptecl dayligth 550 mm oil volume 300 ltr. table height 900 mm table width 90.0 mm voltage 400 Volt total power requirement 15.0 kW weight 12100 kg range L-W-H 5.100x2.150x2.850 mm ----- HIGH-SPEED hydraulic press brake with increased installation height increased cylinder stroke enlarged projection ----- Furnishing: - DELEM CNC control model DA 66T - swiveling touchscreen control unit - 7 controlled axes: Y1 - Y2 - X - R - Z1 and Z2, as well as CNC crowning - electr. controlled backgauge X-axis = 800 mm / R-axis = 250 mm - on ball screws - controlled electr. Stop fingers Z1 + Z2 - split upper deer foot tool Roleri 135.85.R08, "System A" - with additional crowning of the upper wedge - Split universal die block M 460 R, including die shoe C 1050-R - LEUZE light barrier behind d. machine - BOSCH / HOERBIGER hydr. Components - SIEMENS - electrical system - FIESSLER AKAS laser protection device in front of the machine (including FPSC) - 2 front support arms with SLIDING system (plain bearings) - Double foot operation - CE mark / declaration of conformity - User manual: machine and control in German - Safety manual: press brakes

Condition: used, Year of construction: 2011, AXES Working area X-Y-Z axes * mm 3050-1300-180 Workpiece length in swivel machining mm 1390 Stroke X-Y-Z axes mm 3460-1735-250 Max. travel speed of the X-Y axes m/min 60 WORKING TABLE Number of workpiece supports and vacuum cups 6 / 2 Standard type Standard End stops / Position 1 / rear Vacuum pump m3/h 90/108 DRILLING UNIT Vertical spindles Std/Number/Speed 1/min 12 (8X-5Y) / 4000 Horizontal spindles Std/Number/Speed 1/min 6 (4X-2Y) / 4000 Integrated slotting/sawing unit in X Ømm/1/min 120 / 6000 Motor power kW (HP) 2.2(3) ELECTROSPINDLE Motor power Std. / Opt. (S6) kW (HP) 7.5(10) / 11(15) Max. speed 1/min 24000 Tool changer mounted on the unit carrier in X 4 positions, pneumatic INSTALLATION Installed power KVA 23÷28.5 Compressed air requirement Nl/min 450 Extraction air requirement m3/h 1900+1900 (3400) Required extraction air velocity m/sec 30 Extraction nozzle diameter mm 150+150 (200) Machine weight Kg 3000 * X Distance between the stops - Y Milling center as reference point; Z Workpiece passage GENERAL FEATURES CNC-controlled boring and milling center, in C-frame design and working table with adjustable workpiece supports and vacuum cups, for performing: - Vertical drilling on the surface of the panel - Horizontal drilling on all four sides of the workpiece - Slot milling with disc cutter in "X" direction - General milling operations Self-supporting structure and working table Structure made of a steel welded construction with the control cabinet integrated into the machine frame. Available in two different lengths and with standard workpiece supports or TV supports. Movable unit carrier Box construction made of cold-rolled steel with internal reinforcing ribs, protective devices with bumpers. Working unit Consisting of a drilling head with vertical spindles, horizontal spindles, an integrated slotting and sawing unit and an SCM electrospindle with tool quick-change system type HSK 63 F. Travel paths of the portal and the unit carrier Movement in the X, Y and Z axis takes place on linear prismatic ball-bearing guides with the aid of pre-tensioned linear guides. The power transmission of the X-axis (movable stand) takes place via a pre-tensioned, backlash-free rack and pinion drive with diagonal movement. The movement of the unit carrier in Y and Z direction takes place via pre-tensioned linear guides. The positioning of the working units and the control of the machine functions takes place via "Brushless" three-phase servomotors and digital drives. CNC CONTROL The control unit consists of a numerical control for the milling and drilling machines and a pre-connected personal computer with a graphical user interface "XILOG PLUS". PC -Office- operating system Windows XP Dcjdpfoyymz Uex Aptel - LCD color screen 17 - Qwerty keyboard - Swiveling control panel - Machine interface software Xilog Plus Xilog Plus features Programming - parametric, graphical and ISO programming - Import of DXF and ASCII files - Linear or circular interpolation in three axes, linear in space, spiral in the chosen plane - Supported programming with graphic and syntax aids for drilling and milling operations - Automatic optimization of drilling operations and tool changes - cycles - Possibility of plate zero-point shift for performing drilling on inclined or curved plate sides - Complete compatibility with CAD/CAM Routocam (SCM) - AlphaCam Integrated additional functions - Calculator for direct transfer of the calculated data.

Condition: used, Year of construction: 2008, · Working area X-Y-Z: 3,660 x 1,550 x 130 mm · Travel length X-Y: 4,200 x 2,000 mm Description of the units and accessories (base) The structure of the base body is a monolithic construction made of thick-walled steel. It is stiffened by welded triangular plates across the entire machine bed, making it extremely stable. The triangular shape used for load-bearing parts, with a large base, is the secret to ensuring lasting precision and stability. The machine layout allows the user an optimal workflow despite minimal space requirements. The base body constructed in this way therefore offers the machining unit a balanced and secure base with particularly good load distribution. The mobile unit carrier in gantry design is made of a solid monoblock. It is positioned in the X direction on prismatically ground guides via recirculating ball slides. The work unit is mounted on this mobile unit carrier on prismatic, ground guides and a recirculating ball slide. Axis movement: The drive system in the Y and Z axes is provided by ground, high-precision recirculating ball screws. The X-axis is driven by a backlash-free, preloaded precision rack and pinion drive. This ensures balanced load distribution during the positioning process. This characteristic is important for ensuring balanced movement even in more complex tasks. The various axes are driven by brushless three-phase servo motors/brushless AC motors. These offer excellent positioning speeds thanks to very short ramp times. Furthermore, the measuring system is fully integrated into these motors. These properties make this type of drive completely maintenance-free. · Rapid traverse in X: 40 m/min · Rapid traverse in Y: 60 m/min · Rapid traverse in Z: 22.5 m/min Vacuum system (basic) · Vacuum pump: 100 cbm/h · Power: 2.5 kW · Max. negative pressure (connection) 0.9 bar Control / control cabinet · Office PC or industrial PC (see options) · Basic NC control: ESA-GV KVARA 6.0 · Cable remote control with the most important functions ELECTRIC/ELECTRONIC CNC CONTROL Universal is equipped with a powerful NC control. The integrated office PC gives the NC control an unparalleled level of familiarity: the software runs on Windows XP and allows quick and easy programming, which is easy to learn even for inexperienced users. The system is open and allows the connection of CD-ROM drives, audio cards, barcode readers, modems, printers, scanning systems, etc. Furthermore, the installation of all network systems, as well as all commercially available CAD programs, is possible. To reduce space, the control cabinet is located under the machine table, and the operator works at a separate terminal on casters, which can be freely positioned. XILOG PROGRAMMING SYSTEM Software features: - Import of DXF files - Import of ASCII files - User interface in the operator's native language (available for languages I - GB - F - D - E) - Linear and circular interpolation in three axes, linear in space, spiral in the selected plane - Assisted programming - Calculator for direct transfer of calculated data - Graphic and syntax aids for drilling and milling operations - Parametric programming to perform the same panel machining on different Dedovvi Rfepfx Aptjcl

Condition: used, Year of construction: 2018, Startech cn MAIN FEATURES FLEXIBLE AND CUSTOMIZED PRODUCTION COMBINED WITH SPEED AND PRECISION DRILLING FROM ABOVE WITH REFERENCE TO THE TOP OF THE PLATE ALLOWS ABSOLUTELY PRECISION MACHINING NUMERICAL CONTROL WITH 7" COLOR SCREEN: SIMPLE AND INTUITIVE TECHNICAL DATA Startech CN AXES Max. workpiece dimensions X-Y-Z mm 3050 x 800 x 50 Min. workpiece dimensions X-Y-Z mm 300 x 90 x 10 Drilling/slotting work area mm 0 x 800/0 x 800 X-axis stroke mm 750 Max. travel speed of the X-Y axes m / min 25 DRILLING UNIT Vertical spindles number 7 (4X-4Y one of them common) Horizontal spindles (along the Y axis) Number 2 (1+1) Horizontal spindles (along the X axis) Number 1 Fixed groove saw (direction) X Diameter of the groove saw mm 100 Max. thickness of the groove saw mm 5 Motor power kW (HP) 1.5 (2) Spindle speed rpm 3350 Speed of the groove saw rpm 4300 INSTALLATION Power supply V (Hz) 380 / 400 (50 / 60) Installed power KVA 4.5 Compressed air demand bar 6 Compressed air consumption Nl/cycle 90 Extraction demand m3 / h 1200 Extraction air speed m / sec 20 Extraction nozzle diameter mm 120 GENERAL CHARACTERISTICS Universal CNC drilling machine with work table with fixed gantry and movable workpiece for performing the following machining operations: - Vertical drilling on the panel surface - Horizontal drilling on all four sides of the workpiece - Groove Milling with integrated groove saw in the "X" direction. Self-supporting structure. Machine frame made of tubular steel to provide a large base for the work table. The structure is positioned on three self-leveling feet. The electrical control cabinet is integrated into the machine frame. "Easy Motion" central Bakelite support table: - an MDF sector for through-hole drilling, automatically pivoting for horizontal drilling - an infeed roller that facilitates panel loading - a rear roller conveyor that facilitates panel sliding - left and right stops - a central aligner with manual adjustment. The left and right stops are required to drill the two opposite sides of the panel horizontally in the "X" direction. Panel positioning along the X axis is achieved by means of suction cups. Unit support. This is a gantry structure made of tubular steel. The main machining unit is installed on the gantry. F10L drilling unit includes: - 7 independent vertical spindles - Drill chuck D10 mm - Distance between spindles 32 mm - 2 horizontal drilling heads, 1 in X direction with a single drill, 1 double drilling head in Y direction (1 + 1 drill chuck D10 mm) - Speed 3350 rpm - 1 integrated sawing unit in X (max. diameter 100 mm) - Saw blade speed 4300 rpm - Motor power 1.5 kW - Vertical pneumatic travel per spindle 70 mm - Horizontal pneumatic travel of the drilling unit Positioning of the workpiece and drive of the machining unit A CNC-controlled suction cup clamps the workpiece and positions it sequentially under the machining unit during machining. The movement in X and Y axis is carried out on THK guides with transmission on reinforced toothed Movement in Z axis is carried out pneumatically on "ball-bushing" guides with positioning on stop adjustable via the positioning of the working units is carried out via technology and drives with -CONTROL The control was specially developed for use Djdovwbp Aopfx Aptjcl

Condition: new, pressure 175 t chamfer lenght 3100 mm distance between columns 2600 mm column arm 410 mm ram stroke speed 180 mm/sec work speed 12.0 mm/min Dcodexabfxepfx Aptel return speed 190 mm/sec work stroke 275 mm dayligth 550 mm oil volume 300 ltr. table height 900 mm table width 90.0 mm voltage 400 Volt total power requirement 15.0 kW weight 9800 kg range L-W-H 4150 x 2150 x 2800 mm ----- HIGH-SPEED hydraulic press brake with increased installation height increased cylinder stroke enlarged projection ----- Furnishing: - DELEM CNC control model DA 66T - swiveling touchscreen control unit - 7 controlled axes: Y1 - Y2 - X - R - Z1 and Z2, as well as CNC crowning - electr. controlled backgauge X-axis = 800 mm / R-axis = 250 mm - on ball screws - controlled electr. Stop fingers Z1 + Z2 - split upper deer foot tool Roleri 135.85.R08, "System A" - with additional crowning of the upper wedge - Split universal die block M 460 R, including die shoe C 1050-R - LEUZE light barrier behind d. machine - BOSCH / HOERBIGER hydr. Components - SIEMENS - electrical system - FIESSLER AKAS laser protection device in front of the machine (including FPSC) - 2 front support arms with SLIDING system (plain bearings) - Double foot operation - CE mark / declaration of conformity - User manual: machine and control in German - Safety manual: press brakes

Condition: used, Year of construction: 2015, sheet width 3080 mm plate thickness 16.0 mm thickness at "Niro-steel" 12.0 mm no. of strokes 7 - 12 Hub/min cutting angle 0.5 - 2.5 ° back stop - adjustable max. 1000 mm traversing speed 200 mm/sek down holder 14 Stück work height max. 840 mm Column width 3420 mm throat 350 mm Control D-Touch 7 oil volume 450 l voltage 400 V engine output 45.0 kW weight 18150 kg range L-W-H 4130 x 2210 x 2570 mm Good / well-maintained condition (!!) New price ~ €120.000 Special price upon request Dcsdexab Rujpfx Aptsl Features: - Robust electro-hydraulic sheet metal shear ("guided") - CNC control unit D-Touch 7 ("touchscreen") * Anti-reflective robust 7" color touchscreen control panel * Easy positioning to the desired size * Positioning accuracy 0.1 mm * Unlimited material definition in the material library * Intuitive menu navigation * Separate display for actual and target values * Backgauge retraction function * Cutting length control via adjustable stroke length * Cut counter * Automatic machine stop when the programmed cuts are reached - CNC electro-motorized adjustable backgauge * Travel range max. 1,000 mm * Backgauge adjustment via ball screws and linear guides - CNC electro-motorized cutting gap adjustment - CNC Electro-hydraulic cutting angle adjustment - Heavy-duty welded steel construction - Ergonomically positioned and clearly laid-out control panel - Hold-down clamp positioned close to the cutting edge - Front light barrier (instead of finger guard) - Self-regulating hold-down clamp pressure - Rear safety device (light barrier) - 1x side stop (L = 1,500 mm) - 2x support arms (L = 1,000 mm each) - Wide sheet supports with ball transfer rollers - Mobile foot switch with emergency stop function - High-quality, regrindable blades (split) - Rear sheet chute - Original operating instructions