3
material width:140 mm
Jtzhnq
dimensions of the machine ca.:1,30 x 0,78 x 0,70 m
6
Planetary machine Baer
- used
- for 60 beds
F0z2gphak
- 1 boiler
- 3 tools
- checked and cleaned
- technically good
- ex stock
- price 2.700 €
4
The Maxi 100 is a cable peeler designed to separate copper or aluminum from the housing in electrical cables, whether plastic, lead or any other material of varying thickness.
Power consumption: 380 volts / 2.2 kW
Weight: 230 kg
Possible sizes: 6 - 90 mm
Dimensions:
Height 1200 mm
width 760 mm
Edaxaf
length 1850 mm
Processing speed: 22 meter/min
4
Bar sharpening machine make HIRT type 5
Machine # 0115
Technical data:
Cewuxy0pcb
Bar diameter max. 40 mm
driving power 0,75 kW
power supply 380 V / 50 Hz
outer dimensions 800 x 400 x 1000 mm
used, in good condition
5
6-spindle-automatic lathe
brand: SCHÜTTE
type: SF51
new in: 1981
Cafler79es
equipped with: pick up attachement
thread chasing attachement
barfeed
11
Multi-spindle milling machine with integrated bar feeder LNS QLS80S2. Machine was used only for dry machining of plastics. Bar capacity 16 mm. Sawing unit (lateral), one HF spindle (frontal)and gripper unit (frontal). Control Fanuc OiMD
Qea2t
14
Buffoli Type 2D-TRB-10-CNC Trans-Bar Flex Transfer Machine. This machine is able to produce fittings from round brass bars. It consists of a horizontal axis indexing turret with 12 stations, each one equipped with one rotating clamping device (chuck). There is 10 working units in the machine frame, for drilling, threading, rolling, recessing and turning. S/N 476 (2006)
Please Note: This lot is located in Limerick, Ireland. Unfortunately, there are no loading facilities onsite, dismantling and l...
4
Gallus Welding Device/Welding Bar for Cylinder Moulds
dimensions: 1290mm x 375mm x 225mm
Weight 30 Kg
Qkv89
Range of application: Gallus R160/R200/R250/T250/CS250/R300/Arsoma EM 410
4
a fully automatic machine for removing the casing from various types of sausages and vegetarian and vegan products
Cfr0ernvti
4
Mogensen Bar Sizer
Brand: Mogensen
Type: Sizer VX 2058
Cf27ptuv3h
Dim.: 6000 x 1900 mm
Execution: 5 Steps
Bars: length 1000 mm, diameter 40 mm Ø, distance C.C: 100 mm
On stock: 2 pieces
KESTECH CNC PRO BAR MODEL ROTARY TRANSFER MACHINE
This machine enables you to achieve a much higher capacity from 3 to 15 times compared to standard machines and narrower machining tolerances than 6 spindles and multi-axis lathes, in direct proportion to number of machining processes. It is distinguished by its unit structure driven by Mitsubishi Absolute Servo Motors, its turret with High-Speed Cycle technology, its CNC control, the ability to process materials of different types and diameter...
2
29000 Be.H
C0gjczte
Single bar feeder Irco. Clamping equipment and tool set complete.
Full description on request to companies only.
4
Buffoli Type 2D-TRB-10-CNC Trans-Bar Flex Transfer Machine. This machine is able to produce fittings from round brass bars. It consists of a horizontal axis indexing turret with 12 stations, each one equipped with one rotating clamping device (chuck). There is 10 working units in the machine frame, for drilling, threading, rolling, recessing and turning. (2006)
Please Note: This lot is located in Limerick, Ireland. Unfortunately, there are no loading facilities onsite, dismantling and loading ...
10
Offer 22436
Hydr. profile and bar shears with notching device and hole punching machine
Technical data:
Cfiresvbgw
- Flat steel shear
- flat steel - 400 x 16 mm
- or: 300 x 18 mm
- Section steel shear
- L- and T-iron at 90° 130 x 12 mm
- square steel / round steel 40 / 40 mm
- notcher
- with square notcher for sheets up to approx. 13 mm
- notch depth approx. 70 mm
- notch width approx. 52 mm
- Hole punch
- punching force approx. 60 t
- throat 400 mm
- stroke approx. 10 to 50 m...
6
round shaving head with 9 bores arranged on the circumference, diameter: 4, 6, 8, 10, 12, 15, 16 u. 18 mm, square 5 mm
Shear force approx .: 36 mp
O8dd7
Length stop adjustable up to: 1000 mm
Hydraulic drive: 380 V, 4 kW
Weight:
Required space: 2900 x 800 x 1300 mm
4
Mogensen Bar Sizer
Brand: Mogensen
Cf27qqigyk
Type: Sizer VX 2558
Dim.: 6000 x 2400 mm
Execution: 5 Steps
Bars: length 950 mm, diameter 30 mm Ø, distance C.C: 36 mm
5
Peeling and coring machine for melons and pineapples
Peeling and coring machine for melons and pineapples, with cutting table and slide waste. The machine is specifically suitable for melons and pineapples. Entirely built with INOX chrome steel structure. Equipped with electrical cabinet and provided with two inverters: one for fruit speed regulation and one for blade speed.
Technical characteristics:
Weight: approx. 650 kg
Machine size 105 x 800 x H2200 mm
Auxiliary voltage 380 V. Three-phase...
2
Faor sale ENGEL 400 tons tie-bar-less IMM, type 2050/400 HL built ins 2003, working hours approx. 57.000.
2usw0y
This machine will be delivered re-conditioned and can be shown under power!
4
Totally new.Main engine 15 Kw. Rollers engine 0.5 Kw. Working speed 8 meters/min. Video after request.
B8loi0whdm
7
Dividing 100-600gr
Width 610mm
Depth 1350mm
Height 1540mm
Wodgvepr
Belt width 245mm
Belt length 750mm
Engine power 1,5kW
Weight 550kg
10
- cam-controlled automatic lathe including loading magazine
- max. bar diameter 25 mm
- tailstock
- weight approx. 650 kg
- dimensions (LxWxH) approx. 1000 x 600 x 1500 mm
- 2 vertical tool holders
- 2 horizontal tool holders
Dy8dse
- Accessories
5
WORKING HEIGHT: 30 CM
0bnrc
In very good condition.
5
Gildemeister
6-spindle automatic lathe, cam-controlled
max. bar capacity: 32,0 mm
for bars up to 3,30 m
Bfmo87q8
- incl. bar guide,
- steel machining, run with cutting oil
- simply equipped with tools
- 1 set of clamping and feed grippers
- change gears (on machine)
- 1 set of curves for cross slide
- 1 set of curves for main slide
Spindle stop
5
Bin capacity: 40 [kg].
Capacity: Up to 140 [bulbs/min].
Raw material size: 45 - 140 [mm].
Overall width of device: 1050 [mm].
Total height of the machine: 1880 [mm].
Total length of machine: 4830 [mm].
Number of operating paths: 2
loading height of onion: 1000 [mm]
Height of onion pick-up: 700 [mm]
Height of waste collection: 400 [mm].
Power supply: 3 x 400 [V] / 50 [Hz]
Installed power: 1,2 [kW].
Compressed air connection: 8-10 [bar].
Air consumption: 1,9 [m3/min].
Noise level: Over 80 [dB].
Co...
6
Fruit diameter: 100-250mm, skin thickness: 3-10mm, connected load: 1.5kW, width: 800mm, height: 2200mm, weight: 650kg.
Cdlsmuhqfc
4
Sectioning plant truncated logs
Swavtc
5
Drive: Electric 400 v - 3.0 kW
Cutting speed: approx. 27 m / min
Cutting capacity: 6-100 mm
Dimensions: 700 x 700 x 1,300 mm
2hj0odfd3
Weight: 190 kg
9
Technical data:
Punching pressure: 50 to
max. punching capacity: ∅ 28 x 13 mm
working radius: 250 mm
flat steel: 300 x 15 mm
Angle steel: 120 x 120 x 10 mm
square steel: 40 mm
Round steel: 40 mm
notches: 250 x 250 x 6 mm
Dimensions (length x width x height): approx. 1050 x 1550 x 1750 mm
Weight: approx. 1.2 tons
accessories:
Sweyrw
various tools
The seller is not liable for writing or data transmission errors. The machine is in appearance, technology and wear according to the age; used machine...
3
Gildemeister
6-spindle automatic lathe, cam-controlled
max. bar capacity: 32,0 mm
for bars up to 3,30 m
- incl. bar guide,
- steel machining, run with cutting oil
- simply equipped with tools
- 1 set of clamping and feed grippers
- change gears (on machine)
- 1 set of curves for cross slide
Bfdq2uya
- 1 set of curves for main slide
Spindle stop
9
Hopper Capacity: 40 in [kg]
Capacity: up to 140 [Cebul/min]
Raw Material Size: 45 – 100 [mm]
Total Device width: 1700 in [mm]
Total height of device: 2200 in [mm]
Total length of the device: 8500 in [mm]
Number of working paths: 2
Onion Loading Height: 1000 in [mm]
Onion Reception Height: 850 in [mm]
Waste collection Height: 400 in [mm]
Power supply: 3 x 400 in [V]/50 [Hz]
Installation power: 3 [kW]
Compressed air connection: 8-10 in [bar]
Air consumption: 1.9 [m3/min]
Noise level:...
15
ABL OP30 KM Peeling Machine
Year 2012
Change Tools for Mango and Kiwi Fruit
Ccqngnofmr
Feed and Waste Conveyors
Very Well Maintained
4
Brand: SOLING
Model: SCR 125
Tipo: Automatic hydraulic shear
Maximum cutting diamante: 20 mm
Minimum cutting diameter: 6 mm
Bar loader up to : 6500 mm
Maximum cutting length: 1.000 mm
Minimum cutting length : 180 mm
Components
Automatic bar loader
Hydraulic cutting head
B9i2gd8pqs
Electric desk
Adjustable cutting length stop
Manual
4
CNC PRO MODEL can be produced options such as single or double robot, with or without camera, fully automated silo feed, vibratory-feed or sliding table mechanism, vertical or horizontal axis, turret with 2-18 stations, 2 units to 45 units, 5 axis to 200 axis. It is able to meet all kinds of needs that are compatible with mass production parts of any form with almost all kinds of raw materials such as casting and forging states of raw materials like Steel, Brass, Stainless Steel, Aluminum etc. I...
9
Technical data:
Punching pressure: 115 to
max. punching capacity: ∅ 40 x 20 mm
working radius: 355 mm
flat steel: 380 x 55 mm or 600 x 15 mm
Caxyvn02ow
angle steel: 150 x 150 x 18 mm
Square steel: 55 x 55 mm
Round steel: ∅ 55 mm
Motor power: 7.5 kW
Dimensions (length x width x height): approx. 2050 x 1050 x 2050 mm
Weight: approx. 3.3 tons
The seller is not liable for writing or data transmission errors. The machine is in appearance, technology and wear according to the age; used machines are s...
5
Technical data:
Punching pressure: 75 to
max. punching capacity: ∅ 30 x 22 mm
07k00whf
stroke: 70 mm
max. stroke rate: 42 / min.
working radius: 510 mm
flat steel: 450 x 15 mm or 300 x 20 mm
Angle steel: 150 x 13 mm
square steel: 44 mm
Round steel: ∅ 50 mm
Dimensions (length x width x height): approx. 1650 x 1050 x 1950 mm
Weight: approx. 2.5 tons
The seller is not liable for writing or data transmission errors. The machine is in appearance, technique and wear according to the age; used machines...
9
bore capacity in steel (diameter) 25,0 / 30,0 mm
throat 150 mm
bore stroke 120 mm
threading M18 / M22
spindle taper 3 MK
table: 300 x 270 mm
turning speeds 200 - 4.000 U/min
B3hhwzfr27
column diameter 100 mm
total power requirement 0,75 / 1,1 kW
weight 170 kg
range L-W-H 800 x 500 x 1400 mm
** from a training workshop (!!)
** New price approx. 4.700 euros
Furnishing:
- robust bench drill with V-belt drive
- Clamp / relax using a quick release lever
- stepless speed adjustment
- digital spee...
10