Used Barrel Press for sale (12,657)

Condition: new, Year of construction: 2026, power: 7.5 kW (10.20 HP), pressing force: 60 t, stroke length: 160 mm, operating speed: 10 mm/s, reverse speed: 90 mm/s, throat depth: 320 mm, ram plate length: 2,100 mm, Equipment: CE marking, documentation/manual, safety light barrier, Standard Equipment Stroke: 160 mm Daylight (Distance between upper and lower dies): 380 mm Throat Depth: 320 mm Bending Length: 2100 mm Distance between Columns: 1700 mm Machine Features Double-cylinder upper beam bending system Steel frame and upper beam construction providing high static and dynamic rigidity Upper beam movement supported by fiber slide bearings High-strength balance shaft and eccentric bearing system for maintaining parallelism Motor-controlled angle adjustment with a mechanical stroke system within the cylinders Wide working clearance suitable for using different dies Tonnage adjustment and bottom dead center stop via NC control unit Hydraulic safety system against overpressure Dual-speed operating system consisting of free descent, bending, and fast return CE-compliant multi-functional foot pedal and emergency stop system Compact hydraulic power unit with HAWE or Rexroth components Remote service support with Siemens, Pizzato, and Balluff electrical equipment LEUZE safety system and learning mode NC control unit with 500 programs and 200 lines of memory per program Easy program loading and downloading via USB Standard upper and lower die set NC-controlled motorized X-axis back gauge (600 mm) Linear guide and programmable back gauge system 0.2 mm positioning accuracy Motor-controlled Y-axis angle adjustment Mobile control panel Lrodpfxszcmbfs Abysn Front support arms with linear guides Lower die centering and fixing bolts Programmable precision back gauge retraction function Optional Equipment Motorized R-axis Custom bending dies Dual-hand and foot-controlled special pedal system DSP or FIESSLER safety systems Extended back gauge distance Additional back gauge fingers Additional front support arm Manual crowning system Motorized crowning system Technical Specifications Bending Force: 60 Tons Maximum Bending Capacity: 4 mm Bending Length: 2100 mm Distance between Columns: 1700 mm Stroke: 160 mm Bending Speed: 10 mm/s Idle Descent Speed: 90 mm/s Throat Depth: 320 mm Daylight: 380 mm Table Width: 100 mm Table Height: 845 mm Main Motor Power: 7.5 kW X-Axis Motor: 0.75 kW Y-Axis Motor: 0.37 kW Optional R-Axis Motor: 0.25 kW Back Gauge Distance: 600 mm Oil Tank Capacity: 120 L Machine Length: 2450 mm Machine Width: 1600 mm Machine Height: 2235 mm Machine Weight: 4340 kg Country of Origin: Turkey Manufacturer: CRONOSSTECH Makina

Condition: like new (used), Year of construction: 2026, power: 3 kW (4.08 HP), pressing force: 30 t, stroke length: 150 mm, operating speed: 10 mm/s, reverse speed: 70 mm/s, throat depth: 255 mm, ram plate length: 1,270 mm, Equipment: CE marking, documentation/manual, safety light barrier, Standard Equipment Stroke: 150 mm Distance Between Upper and Lower Dies (Daylight): 265 mm Throat Depth: 255 mm Bending Length: 1270 mm Distance Between Columns: 1010 mm Machine Features Double-cylinder upper beam bending system Steel frame construction providing high static and dynamic rigidity Upper beam movement supported by fiber slide bearings High-strength balancing shaft and eccentric bearing system supporting parallelism Motor-controlled angle adjustment with a mechanical stroke system inside the cylinder Wide opening and high stroke suitable for use with different dies Easy tonnage adjustment and bottom dead center stop via NC control Hydraulic safety system against overpressure Dual-speed operating system consisting of free descent, bending, and fast return CE-compliant, multi-functional foot pedal with emergency stop Compact hydraulic power unit, top-mounted, with HAWE or Rexroth components Siemens, Pizzato, and Balluff electrical components LEUZE safety system and learning mode NC control unit with 500 programs and 200 lines per program Program transfer via USB Standard upper and lower die set NC-controlled motorized X-axis back gauge (500 mm) Back gauge system with linear slides 0.2 mm positioning accuracy Motor-controlled Y-axis angle adjustment Mobile control panel Front support arms with linear slides Lower die centering bolts Programmable, precise back gauge retraction function Optional Equipment Motorized R-axis Special bending dies Special pedal system with dual-hand + foot control DSP or Fiessler safety systems Extended back gauge distance Additional back gauge fingers Additional front support arm Manual crowning system Motorized crowning system Technical Specifications Bending Force: 30 tons Maximum Bending Capacity: 4 mm Bending Length: 1270 mm Distance Between Columns: 1010 mm Stroke: 150 mm Bending Speed: 10 mm/s Free Descent Speed: 70 mm/s Throat Depth: 255 mm Distance Between Upper and Lower Dies: 265 mm Table Width: 130 mm Table Height: 830 mm Main Motor Power: 3 kW X-Axis Motor: 0.55 kW Y-Axis Motor: 0.18 kW Optional R-Axis Motor: 0.25 kW Back Gauge Distance: 500 mm Oil Tank Capacity: 90 L Machine Length: 1780 mm Machine Width: 1375 mm Lsdpfszcl S Nex Abyorn Machine Height: 2160 mm Machine Weight: 1700 kg Country of Origin: Turkey Manufacturer: CRONOSSTECH Makina

Condition: good (used), Pressure 63to Stroke -400mm Distance ram-table 700mm Table size 1800x500mm MARCELS MASCHINEN CH Lredpfx Aboch Dacoyen

Condition: like new (used), Year of construction: 1985, machine/vehicle number: 38754, functionality: limited functionality, operating hours: 200 h, pressing force: 250 t, This plate bending machine was installed new in 1989 and was used for 200 Hrs and never used ever since. The mechanical parts are fully functional and are in perfect condition but the electrical board needs fixing. Force: 250 mp (metric tons) Working Surface Length: 5600 mm Working Surface Width: 400 mm Working Surface Height: 100 mm Lodpfxoykl Iae Abyjrn Weight: Approximately 37,000 kg Press Sizes (LxHxW): 5700 x 3150 x 5200 mm

Condition: good (used), Year of construction: 2014, Pellet Press Manufacturer - TEKNO UNO Model - TK 304 Lrjdpfxjvdrtxo Abyen Year - 2014 Motor Power - 50 kw Capacity - 450 kg/h

Condition: excellent (used), Year of construction: 1994, Nail making machine Make: WAFIOS Type: N90 Constr. year: 1994 diameter range: 2,5-3,8 mm nail length: 50-90 mm output – pieces/min: 800 Machine includes Automatic wire paz off and wire cleaner !! Lodpfxjuhxqme Abyorn

Condition: good (used), Year of construction: 1980, Technical Details ; Wire Diameter - 1.2- 4,5 mm Nails lenght - 10- 150 mm Capacity - 800 kg/h List of equipment : 1x Wafios S150 2X Wafios S120 Lsdjvfc A Topfx Abyjrn 1x Kovopol THA 60 1X Kovopol THA 100 1X Moroni SPND 80 2x Nails polishing machine Wire Drawing Line SKET 5 Blocks Wire input - max. 6,0 mm Complete nail making plant in good working condition !! wire output - min. 2,5 mm

Condition: used, Year of construction: 1992, Used 4-meter CNC press brake from Haco Type: PPES 40200 Capacity: 4100 x 200 tons Lrodezgt Tzopfx Abyon FastBend 2D CNC control (refurbished!) 1 set of complete tooling (not visible in the pictures, but included) CNC crowning Euro-style tool clamping system

Condition: used, Year of construction: 2022, Force: 3000 kN; Stroke: 250 mm; Dimensions: 705 x 500 x 500 mm; Weight: 11.5 tonnes; Hydraulic press, nominal pressure: 260 bar; Maximum pressing force: 300 tonnes. Ledpfozgv Rcsx Abyorn

Condition: reconditioned (used), Year of construction: 1996, functionality: fully functional, pressing force: 170 t, filling opening width: 1,020 mm, filling opening length: 1,800 mm, bale width: 1,100 mm, bale height: 1,100 mm, bale weight: 900 kg, overall weight: 40,000 kg, oil tank capacity: 3,000 l, year of last overhaul: 2025, volume flow: 750 m³/h, For sale is a used baling press system consisting of a chain belt conveyor for underfloor operation, with a feed hopper, a hydraulic pre-compactor with ruffler, a MACPRESSE 111A baling press, two complete wire drawing frames with 5 wire reel stands each, without wire. Technical data baler: Manufacturer MACPRESSE EUROPA S.R.L. Typ 111A Year of construction 1996, refurbished in 10/2024 Press power main press 170 tons Specific press capacity 14 kg/cm² Feed channel 1,800 x 1,020 mm Filling volume 2,5 cm³ Theoretic throughput rate 750 m³/h Bale size 1,100 x 1,100 mm, length variable Driving motor 2 x 55 kW Tying system 5-fold horizontal, full automatic Throughput rate at a approx. 30 up to 35 tons/h, depends on material Volume hydraulic oil tank 3,000 l Transport dimensions of press with new machine feets 113,700 x 2,300 x 2,900 mm (l x w x h) Machine weight baler approx. 40 tons Comments: The baler was partially overhauled in our workshop and tested after completion of the work, please look at our functional video. The system was previously used to bale paper and cardboard from municipal collections. The contract was awarded elsewhere after the end of the contract period, so the complete system is for sale. The overhaul work carried out and the spare parts replaced can be found in the detailed photo documentation and in our quotation. The documentation (Manual, CE, electr./hydr.-drawings), are completely available. Inspections are possible after agreement. We will not assume liability for the given technical data and possible errors. Technical data conveyor belt: Manufacturer Wagensfeld B.V. Type chain belt conveyor 1700 mm Year of construction 2017 Drive power 7.5 kW Belt speed 14 m/minute Length of infeed conveyor 6,900 mm Length of ascending belt 12,885 mm Length of gooseneck 1,747 mm Overall length 21,271 mm Pitch 32° Effective width 1,644 mm Height of drive shaft above ground 5,777 mm Wall height of feed conveyor 500 mm Wall height of ascending conveyor 880 mm Steel flights height 40 mm Distance between flights 1200 mm Transport dimensions conveyor disassembled 15,005 x 2,503 x 2,435 mm (l x w x h) Pit dimensions 11,500 x 2,700 x 1,015 mm (l x w x d) Remarks: The chain belt conveyor, built in 2017, was later made to fit the baler during the last installation of the baler in the Netherlands and is newly installed. The conveyor belt is in good, operational condition and has therefore not been overhauled. An installation drawing with the pit dimensions is available. Lrsdpoy S Rqwofx Abyjn Scope of delifery: 1 chain belt conveyor, Wagensveld B.V. 1 piece feed hopper with pre-compressor flaps 1 piece wirbulator 1 baler MACPRESSE, type 111A 2 wire drawing frames with wire reel stands, without wire 1 operating manual with CE declaration, electrical and hydraulic circuit diagram

Condition: reconditioned (used), Year of construction: 2009, operating hours: 22,029 h, functionality: fully functional, pressing force: 80 t, filling opening width: 1,400 mm, filling opening length: 1,100 mm, bale width: 1,100 mm, bale height: 750 mm, bale weight: 600 kg, overall weight: 16,000 kg, power: 75 kW (101.97 HP), year of last overhaul: 2025, volume flow: 300 m³/h, Technical data baler: Manufacturer Avermann Maschinenfabrik GmbH & Co. KG, Germany Type AVOS 1410-45/80 Year of construction 2009 Operation hours 22,029 hours, as of December 2025 Press power main press 80kN Specific press force 103,9 N/cm² Feed channel 1,400 x 1,000 mm Theoretic cycle time 12 sec Theoretic throughput capacity 300 m³/h Bale size 1,100 x 750 (w x h), the length is variable Drive power 45 kW Connected load 75 kW Tying system 4-fold, vertical, fully automatic Throughput capacity at a bulk weight of 30 kg/cbm approx. 6,0 t/h bulk weight of 50 kg/cbm approx. 10,5 t/h bulk weight of 100 kg/cbm approx. 17,5 t/h Bale weight with a bale length of approx. 1.2 m up to 600 kg, depends on material SPS controller Siemens S7-300 Operating panel pulsotronic Baler dimensions built up 8,610 x 2,400 x 3,835 mm (l x w x h) Transport dimensions 8500 x 2450 x 2950 mm (l x w x h) Transport weight baler approx. 16 t Special equipment: Wear-resistant floor made of HARDOX steel Special press ram for pressing ‘difficult’ materials and loose bulk materials with small grain sizes Control cabinet air conditioning Machine foot elevation 200 mm Remark: The machine was serviced and partially overhauled in our workshop. The following work was carried out and parts replaced: Lrodpfx Abjy R Nnfeysn • Dismantling of the press ram, disassembly into individual parts, reconditioning of the mechanics, replacement of the following plastic wear plates and rails: o Plastic wear rails left/right under the press ram o Plastic wear rails left/right above the press ram o Plastic main wear plate (support plate) in the centre under the press ram • Steel guide rails on the left/right in the frame • Replacement of the entire base plate, four-piece, made of wear-resistant HARDOX steel • Wire inlet rails in the press floor newly welded and smoothed • Replacement of the counter blade, two-piece, in the frame • Adjustment of the blade gap to approx. 2.5 mm • Dismantling of the binding and twisting unit, disassembly into individual parts, loosening of the mechanics, replacement of all deep groove ball bearings and axial ball bearings on the twisting shafts, wire blades cleaned and readjusted, chains greased and tensioned • Support roller in front of the twisting shafts replaced • All hydraulic hoses replaced • Oil filter and air filter replaced • Main hydraulic cylinder checked for leaks • The hydraulic oil is only one year old, has been chemically analyzed, is still in good condition, and has therefore not been changed but can continue to be used. • General maintenance work carried out Finally, the press was subjected to a machine test in manual and automatic mode; see the video for the machine function test. Comments: The documentation (operating instructions, CE declaration, electrical/hydraulic circuit diagram) for the press is available.

Condition: excellent (used), Catalogue no.: 7815 TECHNICAL DATA Worktable dimensions (L/W): 2900x1200mm Overall table dimensions: 3000x1300mm Operating temperature: ±40-60°C Maximum temperature: ±60°C Total machine power: 5.25kW Vacuum pump power: 0.90kW Vacuum pump capacity: approx. 25/30m3/h Noise level: approx. 70dB Lrodpfozcu Sfsx Abysn Dimensions (L/W/H): 3060x1400x1400mm Weight: 360kg – DTR Documentation – Unpainted – Very good condition – Used press Net price: 21,900 PLN Net price: 5,200 EUR depending on the exchange rate of 4.2 EUR (Prices may change with higher fluctuations)

Year of construction: 2026, condition: new, functionality: fully functional, machine/vehicle number: EP8607, Press brake punch for Trumpf 86 degree H220mm gooseneck punch 42CrMo material with full body hardened and radius tip laser hardened Lredpfxjyzpf Ej Abysn

Condition: used, Year of construction: 1996, functionality: fully functional, Pressure 160 t Bending length 3000 mm Machine weight approx. 16 t Equipment: - Two-hand foot pedal Lredpfx Aox A Eucobyen - CNC control Cybelec DNC 800 - Hydraulic upper tool clamping - Hydraulic crowning - Hydraulic lower tool clamping - 5 manually adjustable backgauge fingers - Die displacement - Tool package - Side safety doors - Controlled axes: y1, y2, x, R

Condition: good (used), Year of construction: 1987, functionality: fully functional, Clamping unit heating capacity, 1 heating rod / 8 heating rod: 0,48 / 0,9 kW clamping force: 2 x 500 kN heating plate dimensions: 550 x 600 mm piston stroke: 250 mm Lrjdpfxezfnrcs Abyon diameter of piston, main cylinder: 240 mm diameter of piston, locking cylinder. 39 mm locking cylinder: 260 mm Return capacity: 2 x 600 kN dimensions: 2600 x 2100 x 2100 mm weight approx.: 5 t

Condition: excellent (used), Year of construction: 2006, Dimension: 2650 x 2100 x 2100 mm Clamping Force: 635 KN Lrjdpfx Ajzfnn Rsbyen Working pressure: 206 bar Piston diameter: Ø200 mm Stroke: 140 mm Daylight: 150/180 mm Heating plant dimension: 250 x 300 mm Max. mass of heating plant: 70 kg Oil reservoir: 100 l Rated power: 19.66 kW Heater capacity: 9.6 kW Vacuum motor power: 2,6 kW Between light curtain and mould area: 270 mm Stroke of vacuum cover: 140 mm The vulcanizing press from manufacturer PAN STONE, model S-V-65-2RT-PCD, was used by a renowned German company specializing in sealing technology and electromobility. This company is known for its high quality and innovation in seal production. The machine was part of a production line responsible for manufacturing high-performance seals used in various industries. It was always professionally maintained and repaired, which explains its excellent condition. This press offers you the opportunity to invest in proven technology that was utilized by a leading company in Germany.

Condition: good (used), Year of construction: 1994, Clamping Unit: Clamping force: 7,000 kN Operating pressure: 250 bar Specific pressing pressure: 610 N/cm² Number of levels: 2 Installation height with 75 mm heating plate & 20 mm insulating plate: approx. 2x 190 mm Piston stroke: approx. 400 mm Piston 1 diameter: 543 mm Clamping force, rapid traverse: approx. 2 x 85 kN Retraction force: approx. 2 x 47 kN Operating pressure: 300 bar Piston 2 diameter: 60/40 mm Stroke: 400 mm Lrsdpfx Abjzfnb Rsyen Estimated weight: approx. 16 tonnes Hydraulic System: Pressure adjustment: 40 - 300 bar Flow rate regulation: 0 - 99 % Flow rate l/min (HD): 45 against 300 bar Drive power: 22 kW Tank dimensions (LxWxH): 1000 x 770 x 535 mm Closing Speed: Rapid traverse: approx. 40 - 50 mm/s Slow closing: approx. 0 - 20 mm/s Pressing speed: approx. 0 - 3 mm/s Slow opening: approx. 0 - 20 mm/s Opening, rapid traverse: approx. 0 - 60 mm/s

Condition: used, Year of construction: 2005, functionality: fully functional, Clamping force: 4900 kN Working pressure: 206 bar Heating plate dimensions: 700 x 700 mm diameter of piston: 558,8 mm max. stroke: 250 mm daylight: 300 mm max. mass of heating plant: 560 kg capacity of oil tank: 1100 l rated capacity: 82 kW heating capacity: 56 kW enginge output, vacuum motor: 4 kW Stroke of vacuum cover: 200 mm dimensions: 3975 x 2935 x 2555 mmm Equipped with a crane runway (monorail) with three chain hoists Producer: STHAL Year: 2011 Lredpszfmy Eefx Abyon Lifting capacity: 3 x 400 kg Lenght of crane runway: ca. 3500 mm Rolling chassis Lifting capacity: 400 kg Lifting height: 3000 mm stroke speed - main stroke: 4 m/min stroke speed - fine stroke: 1 m/min The vulcanizing press from manufacturer PAN STONE, was used by a renowned German company specializing in sealing technology and electromobility. This company is known for its high quality and innovation in seal production. It was always professionally maintained and repaired, which explains its excellent condition. This press offers you the opportunity to invest in proven technology that was utilized by a leading company in Germany.

Condition: ready for operation (used), Year of construction: 1995, pressure 35.0 t plate thickness max. 8.0 mm throat 830 mm diameter of seal max. 105 mm table: 1500 x 1200 mm work height max. 920 mm die stroke ca. 90.0 mm strokes per minute ca. 200 Pressure power 220 bar oil volume 80.0 l total power requirement 4.0 kW weight of the machine ca. 3200 kg range L-W-H 1600 x 1800 x 1800 mm The IS 35 hydraulic punching machine has been specially optimized for processing sheet metal and extruded parts. It stands out for its flexibility and manufacturing precision. The machines in the IS series are equipped with 35 metric tons of punching force. Features: - Electro-hydraulic punch press with long reach - Robust C-frame construction * Solid cast or welded frame (C-shape) * Extremely high punching precision * Compact design = small footprint * Hydraulic overload protection - Separate control unit - Single and continuous stroke selectable - Infinitely adjustable controller for: * â??top dead centerâ? - Continuously adjustable control for: * â??bottom dead centerâ? - Digital position display - 1x freely movable foot switch Lrsdjzf Nrkopfx Abyjn - Operating instructions (PDF)

Condition: excellent (used), Year of construction: 2014, power: 5.5 kW (7.48 HP), pressing force: 40 t, table width: 100 mm, table length: 2,100 mm, throat depth: 300 mm, total width: 2,000 mm, total height: 2,100 mm, overall weight: 3,800 kg, Press brake TOSKAR - TA 2100-40 MACH-ID 9474 Make: TOSKAR Type: TA 2100-40 Control: CYBELEC CNC Year: 2014 Cybelec 2D Controll system 4 Axis controlled Y1 / y2 / X / Delta-R 1 set universal tooling Fiessler laser safe  Sheet support arms front side Max. bending length: 2100mm Distance between column: 1650mm Max. pressing force: 40T Beam stroke: 130mm Table Width: 100mm Troth beam: 300mm Approch speed: 100mm/min. Working speed: 8mm/min. Return speed: 100mm/min. Ledpfxezgfv Uo Abyern Adjustment X-Axis back gauge:1009mm Number of controlled axis: 4 Power: 5.5kW Length: 2470mm Width: 2000mm Height: 2100mm Weight: 3800kg Please Note: The information on this page has been obtained to the best of our ability and belief, and from the manufacturers where possible. It is given in good faith, but its accuracy can not be guaranteed. Accordingly, it will not form a representation or constitute contractual terms. We advise you to check any vital details!

Condition: new, Year of construction: 2026, power: 15 kW (20.39 HP), pressing force: 175 t, stroke length: 260 mm, operating speed: 10 mm/s, reverse speed: 130 mm/s, throat depth: 410 mm, ram plate length: 3,700 mm, Equipment: CE marking, documentation/manual, safety light barrier, HPB B175-3700 – 175 Ton x 3700 mm CNC Hydraulic Press Brake The HPB B175-3700 CNC Hydraulic Press Brake, manufactured in Turkey by CRONOSSTECH, is designed for precise and repeatable sheet metal bending operations, offering a bending force of 175 tons and a bending length of 3700 mm. Standard Features: Stroke: 260 mm Lower – Upper Die Gap: 465 mm Throat Depth: 410 mm Bending Length: 3700 mm Distance Between Columns: 3200 mm ESA S830 CNC Control Unit 10” 2D Touchscreen Manual bending sequence and collision control Automatic compensation calculation Angle measurement and correction 2D drawing 2 USB ports Offline software CT-BEND Servo Motorized Back Gauge X-axis: 750 mm Speed: 250 mm/s Accuracy: ±0.05 mm R-axis: 250 mm Hardened ball screw Linear slide system Optional X-axis: 1000 mm Tooling System 2 back gauge fingers European-type Promecam quick die clamping system CRONOSSTECH special narrow lower table Eurostamp ES1260 upper die Eurostamp ES2067 lower die Amada compatible tooling system Standard Equipment B Series open frame design GIVI linear scales LED lighting VDE electrical panel Lrjdpjzb Inkjfx Abyen Schneider or Siemens electrical components HAWE hydraulic block Eckerle pump Siemens drive Single pedal system Energy-saving Standby function 2 adjustable front support arms Optional Features CT-BEND X+R servo motorized back gauge AKAS II front safety laser system PLC safety module Rear light curtains Delem DA53Tx CNC control unit CNC controlled motorized compensation system X-axis 1000 mm extension Technical Specifications Bending Force: 175 Tons Bending Length: 3700 mm Distance Between Columns: 3200 mm Stroke: 260 mm Lower – Upper Die Gap: 465 mm Throat Depth: 410 mm Table Height: 955 mm Machine Length: 5300 mm Machine Width: 2430 mm Machine Height: 2990 mm Approach Speed: 180 mm/s Return Speed: 130 mm/s Bending Speed: 10 mm/s Oil Tank: 180 L Weight: 10,500 kg Main Motor: 15 kW X-axis Speed: 300 mm/s R-axis Speed: 250 mm/s This machine is manufactured in Turkey by CRONOSSTECH. The country of origin is Turkey. 🇹🇷

Condition: good (used), Year of construction: 2014, functionality: unexamined, Press force: 100 t Bending length: 3050 mm Distance between uprights: 2550 mm Machine weight, approx.: 9,000 kg Space requirement, approx.: 4000x2100x2700 mm Ljdpfjzd Tnyjx Abyorn Accessories/Equipment: - 2 support arms in front of the machine - Lazer Safe - 4 stop fingers - Foot switch - Delem DA 75 W control system - Side safety doors - Amada tool holder - Crowning

Condition: good (used), Year of construction: 1989, Pressure 50 t Bending length 2050 mm Ljdpfx Aewn Earobysrn Weight approx. 7,000 kg Accessories: -Foot pedal -Hydraulic upper tool clamping -2 manual movable backgauge fingers -Tools -Controlled axes: y1, y2, X, R -Controller Cybelec DNC 60

Condition: good (used), Year of construction: 2001, functionality: fully functional, Press force: 230 t Bending length: 3060 mm Frame width: 2690 mm Lrjdpfxjzd Tkbe Abyen Stroke: 365 mm Control system: DELEM DA 65 Overhang: 410 mm Installation height: 535 mm Dimensions: 3660 x 2310 x 3100 mm Machine weight (approx.): 17,700 kg Equipment: - CNC control system Delem - Crowning - Wila tool holder - 1 bending aid - 2 support arms - Side protection doors - 2-hand foot control - Die shifting - 2 manually adjustable stop fingers - Controlled axes: y1, y2, x, r - Operating hours: 13,993 h

Condition: good (used), Year of construction: 1994, functionality: fully functional, Press force: 160 t Bending length: 3050 mm Distance between uprights: 2550 mm Stroke: 400 mm Overhang: 250 - 400 mm Machine weight approx.: 15,400 kg Lrjdpfszd S Tzjx Abyon Equipment: -Hydraulic tool clamping, top and bottom -Cybelec DNC 900 control system -Die shifting -Compensation -2-hand foot control -Controlled axes: y1, y2, x, R, z1, z2 -Tool set