Used Barrel for sale (250)

Condition: used, Year of construction: 1999, functionality: fully functional, clamping force: 400 kN, screw diameter: 30 mm, clearance between the columns: 250 mm, column diameter: 50 mm, opening stroke: 480 mm, plate length: 450 mm, plate height: 500 mm, total length: 2,200 mm, total width: 1,200 mm, total height: 1,800 mm, overall weight: 2,800 kg, type of input current: three-phase, input frequency: 50 Hz, input voltage: 400 V, input current: 100 A, Complete Plastic Moulding Line OLEOPRESS OP/Z 40 Press + 3M OPZ 50 Oven + PGV Temperature Controller For sale: complete plastic moulding line consisting of: Hydraulic injection moulding press OLEOPRESS OP/Z 40 Industrial electric oven 3M OPZ 50 Mould temperature controller PGV RHC7 Machines in working condition, available for inspection on site. 🔹 INJECTION MOULDING PRESS Manufacturer: OLEOPRESS S.r.l. (Italy) Model: OP/Z 40 Year: 1999 Clamping force: 400 kN (40 ton) Configuration: Horizontal – 4 columns Technical data: Column distance: 250 × 300 mm Column diameter: 50 mm Maximum opening stroke: 480 mm Platen dimensions: 400 × 500 mm Barrel heating capacity: approx. 6–8 kW Power supply: 400 V – 50 Hz – 100 A – three-phase Air line pressure: 10 bar Ihodsynwvkjpfx Abcow Estimated weight: approx. 2,800 kg Compact, robust machine, suitable for small-to-medium production and technical components. 🔹 INDUSTRIAL OVEN Manufacturer: 3M Forni Industriali (Italy) Model: OPZ 50 Power supply: 400 V Installed power: 36 kW (18 + 18 kW) Maximum temperature: 650°C High-temperature electric industrial oven, suitable for: - preheating moulds - post-curing - polymerisation of thermosetting materials 🔹 MOULD TEMPERATURE CONTROLLER Manufacturer: PGV srl (Italy) Model: RHC7 Power supply: 400 V Rated current: 28.6 A Breaking capacity: 17.6 kA Unit for temperature control of moulds during the production cycle.

Condition: used, Year of construction: 2016, functionality: fully functional, Timber sawing line with horizontal band saw and timber outfeed mechanisation, including control cabinets and hydraulic unit. The roller conveyors are each 11 metres long. The mobile band saw is set up stationary and axles, wheels, tow bar and mudguards are present. Comes with 12 associated saw blades. Available from mid-April/May Mobile saw Wimmer Zenz BN110, year of manufacture 2016, equipped as follows: Manufacturer: ZENZ Type: MOBILE SAW (MOBILSÄGE) Model: BN 110 Equipment: Clearance: 110 x 130 cm Cutting width: 95 cm Cast iron wheels, 850 mm diameter Band saw blade width: 100 mm Drive motor: 22 kW Length: 11 m with drawbar Width 2.55 m, height 2.70 m Weight: 3,500 kg Vertical support: 5.00 Log turner: 1.00 Level adjustment with claws: 4.00 Log roller: 2.00 Pre-cutter: 1.00 Official operational permit for overrun brake: 1.00 SPS control Ihedpfoypat Iox Abcjw Band saw blade 6000x100x1.1 mm stellite Water cooling with 20 l barrel 20 l barrel and nozzle mounted on the blade guide Chain turner: 2.00 Extension 3 m without support beam Chip collection box

Condition: used, We offer directly on behalf of the owner : Twin-screw extruder Make : COPERION ( Werner & Pfleiderer ) Gearbox make : P.I.V Type : ZSK 170 W 1920/1750 Year of construction : 2021 / 2002 / 1986 Screw diameter : 172 mm Screw speed : 4,9 - 49 min-1 Max. torque : 17,500 Nm Main engine : 216 kW In the last 3 years, a total of over €420,000 has been invested in new components and factory overhauls (some of which were previously unused) The extruder was in use until Aug / 2023 and has already been dismantled ready for transport. Iedpfx Abex Nxfkscehw The components are partly redundant and date from the years 1986 - 2021. The scope of delivery consists of : Twin screw degassing Coperion DSE 180 - 1 x year of manufacture 2021 ( 180 t€ ) Main gearbox P.I.V - 1 x year of manufacture 2002, factory overhauled ( 233 t€ ) in 2021, unused - 1 x year of manufacture 1986, factory overhauled in 2016, used 2021 - 2023 Main engines Siemens, 212kW, 460V - 1 x 2002, factory overhauled ( 8 t€ ) in 2020, unused - 1 x year of manufacture 1986, factory overhauled in 2015, used 2020 - 2023 Barrels - 16 various, new + used, with + without openings Screw shafts - 2 x approx. 4,600 mm Miscellaneous : - Supports - screw tips Sold without electrical and control devices and without screw segments. Further technical data and details on request or see data sheets in photos / PDF

Condition: good (used), Year of construction: 2004, operating hours: 63,000 h, functionality: fully functional, clamping force: 1,200 kN, screw diameter: 35 mm, Type: Engel Victory 500/120 Phoenix Year: 2004 Screw ø: 35 & 40 mm (Extra screw & barrel from 2021) Iodpfeymn Insx Abcehw Shot volume ccm: 193 & 251 Operating hours: approx. 63,000 h Complete line: – Robot: Wemo 8-5 3S, Year 2003 – Conveyor belt, Crizaf – Color doser, Moretto – 2 pcs. temperature control units, Regloplas – Extra screw & barrel

Condition: good (used), Year of construction: 2008, clamping force: 2,000 kN, screw diameter: 50 mm, Equipment: documentation/manual, Clamping Unit Clamping force: 200 tons Locking force: 220 tons Maximum opening stroke: 575 mm Minimum mould height: 340 mm Maximum mould height: 690 (790 with WA) mm Maximum daylight between platens: 1265 (1365 with WA) mm Platen size (h × v) : 860 × 860 mm Tie-bar spacing (h × v) : 580 × 580 mm Maximum mould weight: 2500 kg Max. mould weight on moving platen: 1700 kg Hydraulic Ejector Ejector stroke: 180 mm Ejector force: 69 kN Ejector return force: 31 kN Screw diameter 50 mm L/D ratio 20 – Injection pressure (at 400 °C): 1646 bar Shot volume: 442 cm³ Shot weight (PS): 400 g Maximum screw stroke: 225 mm Maximum injection stroke: 400 mm Installed barrel heating power: 14.8 kW Hopper capacity: 70 l Type: Horizontal Iedpfx Aoyark Tobcehw Drive: Hydraulic

Condition: good (used), Year of construction: 2010, clamping force: 1,600 kN, Equipment: documentation/manual, Sumitomo Demag Systec 160/520 – Injection Unit 430 CLAMPING UNIT Clamping force: 1600 kN Mould closing force: 1760 kN Max. opening stroke: 500 mm Min. mould height: 275 mm Max. mould height: 585 mm (685 mm with WA) Max. daylight between platens: 1085 mm (1185 mm with WA) Platen size: 770 × 770 mm Distance between tie bars: 520 × 520 mm Max. mould weight: 2200 kg Max. weight on moving platen: 1300 kg Max. weight on fixed platen: 1700 kg EJECTOR Ejector stroke: 160 mm Ejector force: 59 kN Ejector return force: 29 kN INJECTION UNIT 430 L/D ratio: 20 Screw Ø40 mm Injection pressure: 2025 bar Shot volume: 231 cm³ Shot weight (PS): 210 g Max. dosing stroke: 184 mm Nozzle stroke: 400 mm Nozzle immersion (SVO): 20 mm Nozzle contact force: 80 kN Barrel heating power: Ø35 → 9.4 kW Ø40 → 11.1 kW Ø45 → 11.3 kW Electric screw drive (WA): 22 kW Material hopper capacity: 35 l MACHINE OVERALL Iodpfxoyarfde Abcshw Oil tank capacity: 400 l Pump motors: 22 / 30 / 30 kW Total installed power: 31.4 / 39.4 / 39.4 kW 33.1 / 41.1 / 41.1 kW 33.3 / 41.3 / 41.3 kW EUROMAP 6 (dry cycle): 1.95–364 / 1.75–364 / 1.75–364 Machine weight (without oil): 6800 kg Dimensions (L × W × H): 5.3 × 1.6 × 2.1 m Noise level: 68 / 71 / 68 dB(A)

Condition: excellent (used), Year of construction: 2017, WITTMANN BATTENFELD MacroPower 900/8800 Injection Moulding Machine Type: Servo-hydraulic injection moulding machine Year of manufacture: 2017 Control system: UNILOG B8 INJECTION UNIT • Screw diameter: 105 mm • Screw stroke: 525 mm • Screw L/D ratio: 22 • Calculated shot volume: 4,545 cm³ • Injection pressure: 1,931 bar • Max. screw speed: 167 rpm • Max. plasticising rate (PS): 151 g/s • Screw torque: 8,000 Nm • Nozzle stroke / closing force: 950 mm / 129 kN • Injection flow rate: 725 cm³/s Iedpfx Abewzy N Uscshw • Injection flow rate with dual pump (option): 906 cm³/s • Open-air injection flow rate with tank (option): 1,812 cm³/s • Barrel heating capacity: 53.9 kW • Number of heating zones: 7 CLAMPING UNIT • Clamping force: 9,000 kN • Max. opening stroke: 2,100 mm • Min./Max. mould height: 500–1,000 mm • Platen dimensions: 1,720 × 1,550 mm • Tie bar spacing: 1,200 × 1,000 mm • Ejector: stroke 300 mm / force 165 kN • Mould opening force: 300 kN GENERAL DATA • Pump power: 90 kW • Heating power: 53.9 kW • Hydraulic oil tank capacity: 1,100 l • Machine dimensions (L × W × H): 10,100 × 3,400 × 2,700 mm • Weight: 35,200 kg

Condition: new, neu ca. 12 Wochen ab Auftrags Italien 57900 € 1094.31 € 1 650 mm 0,5 - 170 mm 670 x 2200 mm 4000 m³/h 120 mm 6 bar 78 (+/-2) dB 22 kW 2600 mm 1350 mm 2100 mm 1125 kg WITH 2 WORKING STATIONS: 1 X GRINDING BELT UND 1 X BRUSH UNIT ON TOP Machine made of stress-free welded steel construction for stable and rigid structure. Work table with motorised height adjustment via 4 synchronised spindles. Independent drive motors for each work group. Hoods for extraction inside the machine, one per station. Touch screen for -Automatic star-delta connection of the main motors - Analogue ammeter for each group - Digital display for sheet thickness with decimal point tolerance - Material thickness adjustment (+/- 0.1 mm) - Machine condition monitoring with alarm messages FEEDING SYSTEM Robust steel structure, wear-resistant surface. Vacuum conveyor belt on request Variable feed speed via frequency converter 0.6 to 6.5 m/min. Rubber conveyor belt, oil and temperature resistant Automatic conveyor belt centring Lateral guides to prevent the belt from lifting off. Rubber pressure rollers in front and behind each station, oil and temperature resistant Idle rollers at the front and rear table INCL. OPTIONALTAMPICO BRUSH SYSTEM FOR CONVEYOR BELT CLEANING Ø 150 MM 1 . WORKING GROUP - R Balanced contact roller Anti-oil and anti-heat Nitrile rubber coating Adjustable via eccentric shaft for working position and compensation of abrasive belt wear Pneumatic cylinder for automatic feed to working position and for lifting in case of emergency stop. Abrasive belts and/or Scotch Brite can be used. Motorised adjustment and electronic control of contact roll height. Variable speed motor with automatic brake in case of emergency. Pneumatic tensioning system for the abrasive belt. Sanding belt centring system, with electronic photocell. Oscillation adjustment in width and time. Diameter of contact roller mm 125 Hardness of the rubber wheels Shore 55 Stroke of the contact roller adjustment up-down "Grain adjustment mm 8 Positioning accuracy of the contact roller adjustment mm +/- 0,02 Positioning speed of the contact roller adjustment m/sek 10 Grinding belt speed m/sek 3-18 Motor power kW 7,5 2. WORKING GROUP - X 2 rows of vertical brushes, 4 rotating clockwise and 4 counterclockwise. Transverse movement of the entire group (oscillating) Quick change holder for brushes Brush diameter mm 115 Number of brushes No 8 Oscillation stroke mm 15 Rotation motor power kW 2,2 Revs 1/min 1000 Oscillation motor power kW 0,4 Grinding brush speed m/sec 10,0 Optional accessories: B Group - External barrel brush Ø 150 mm with Scotch Brite Brush € 5150,00 with Wire Brush 0,3 mm € 6060,00 R GROUP - GRINDING BELT Motor 11 kW € 740,00 X GROUP - CUP BRUSHES Motor with variable speed 5,5 kW 350/1100 incl. OPTIONS: Return to Sender System (Grinding part is discharged to the front again) € 1770,00 Conveyor belt with vacuum system - 3,0 kW € 5150,00 Additional PVC coated rollers on infeed and outfeed side € 1510,00 Air pressure system for cleaning the conveyor belt € 1290,00 Tampico Brush System for parts cleaning 0,55kW Ø 150 mm € 4670,00 Tampico Brush system for conveyor belt cleaning Ø 150 mm € 3200,00 Ihjdpfxowiquko Abcjw magnetic conveying system - 2 groups, 200 x 200 mm € 12020,00 Dema...

Condition: used, Year of construction: 1990, functionality: fully functional, machine/vehicle number: LVT50 GMRJA/04069, MACHINE SPECIFICATION Height of centres 195mm Swing over bed 400mm Swing over cross slide 246mm Swing in gap 585mm Width in front of faceplate 165mm Bed length between centres 1250mm Spindle speeds (infinitely variable) 0-2500rpm Spindle nose mounting (Camlock) D1-6 Spindle bore 54mm Spindle motor 7.5kW Width over bedways 318mm Travel of cross slide 250mm Travel of top slide 130mm Travel of tailstock barrel 178mm Taper in tailstock barrel No. 5 MT Approx. Weight 1800kg Machine in Metric execution   MACHINE EQUIPPED WITH Newall 2 Axis Digital Readout System 3 Jaw Chuck Quick change Toolpost Ainjest high speed screwcutting attachment Ihodsxldidepfx Abcjw Chuck Guard Lighting Coolant System Rear Splashguard

Condition: excellent (used), Year of construction: 2011, functionality: fully functional, machine/vehicle number: 6V0148, MACHINE SPECIFICATION Height of centres 170mm Swing over bed 350mm Swing over cross slide 196mm Swing in gap 535mm Width in front of faceplate 165mm Bed length between centres 650mm Spindle speeds (infinitely variable) 15-3250rpm Spindle nose mounting (Camlock) D1-4 Spindle bore 42mm Spindle motor 7.5kW Width over bedways 318mm Travel of cross slide 250mm Travel of top slide 100mm Travel of tailstock barrel 145mm Taper in tailstock barrel No. 4 MT Machine in Metric execution   Ihjdpfxowmm H Ro Abcow MACHINE EQUIPPED WITH Acu-Rite 2 axis DRO System 3 Jaw chucks Quick change toolpost and 2-off toolholders Chuck guard Saddle mounted chip guard Coolant system Lighting Rear splashguard NB Machine ex Dyson apprentice training facility, in excellent condition

Condition: as good as new (ex-display), Year of construction: 2013, functionality: fully functional, machine/vehicle number: 0153, Specification Europa VS660 Centre height 330mm Distance between centres 1500mm Swing over bed 660mm Swing over cross slide 430mm Spindle bore (max. bar dia) 104mm Spindle nose mounting D1-11 Camlock Taper in spindle bore No. 7 Morse Swing in gap 860mm Width of bedways 480mm Total travel of cross slide 390mm Total travel of top slide 190mm Total travel of tailstock barrel 300mm Spindle speeds (infinitely variable) 18 – 1400rpm Drive vee belt and clutches Spindle motor 20HP Imperial pitches (73) 2-84TPI Diametral pitches (27) 8-72DP Metric pitches (51) 0.2 – 14mm Module pitches (20) 0.2 –3.5 MOD Approx. weight 3800 kg Machine in Imperial execution Europa VS660 Gap Bed Centre Lathe in stock in the UK Machine equipped with Fagor 2 axis DRO system with CSS ( Metric and imperial read out options) 3 jaw chuck Quick change toolpost and toolholders Rapid power traverse to saddle lighting Coolant system Chuck guard Rear splash guard Ihodpfonxi H Uox Abcjw

Condition: good (used), Year of construction: 2008, clamping force: 1,700 kN, Equipment: documentation/manual, Demag Systec 170/520 – 600 CLAMPING UNIT Clamping force: 1700 kN Locking force: 1870 kN Max. opening stroke: 500 mm Min. mould height: 275 mm Max. mould height: 585 mm Max. daylight between platens: 1085 mm Platen size: 770 × 770 mm Distance between tie bars: 520 × 520 mm Max. mould weight: 1900 kg Max. mould weight on moving platen: 1300 kg EJECTOR Ejector stroke: 160 mm Ejector force: 59 kN Isdpfx Abjx Ury Escjhw Ejector return force: 29 kN INJECTION UNIT 600 L/D ratio: 20 Screw Ø45 mm Injection pressure: 1914 bar Shot volume: 323 cm³ Shot weight (PS): 294 g Max. screw stroke: 203 mm Nozzle stroke: 400 mm Nozzle immersion (SVO): 20 mm Nozzle contact force: 80 kN Barrel heating power: Ø40 → 11.1 kW Ø45 → 11.3 kW Ø50 → 15.7 kW Material hopper capacity: 50 l GENERAL MACHINE DATA Oil tank capacity: 400 l Hydraulic unit: 22 kW Total installed power: 33.1 kW / 33.3 kW / 37.7 kW EUROMAP 6 dry cycle: 1.95–364 Machine weight (without oil): 6900 kg Machine dimensions (L × W × H): 5.3 × 1.6 × 2.0 m Noise level: 68 dB(A)

Condition: good (used), Year of construction: 2004, CLAMPING UNIT – Ergotech EXTRA 110 Clamping force: 1100 kN Locking force: 1100 kN Max. opening stroke: 600 mm Min. mould height: 250 mm (200 / 175 mm with ZE 214) Max. daylight between platens: 850 mm Platen size: 670 × 670 mm Distance between tie bars: 470 × 470 mm Max. mould weight: 1000 kg Max. mould weight on moving platen: 680 kg INJECTION UNIT 430 L/D ratio: 20 Screw Ø40 mm (B) Specific injection pressure: 2025 bar Shot volume: 231 cm³ Ihjdpfx Ajx Urxnobcew Shot weight (PS): 205 g Max. screw stroke: 184 mm Nozzle stroke: 300 mm Nozzle immersion (SVO): 40 mm Nozzle contact force: 60 kN Barrel heating power: Ø35 → 9.4 kW Ø40 → 11.1 kW Ø45 → 11.3 kW Hopper capacity: 35 l

Condition: used, Year of construction: 2014, Technical details: grinding diameter max.: 3-220 mm regulating wheel width: 500 mm max. width of grinding wheel: 500 mm weight of the machine ca.: 16 t. dimensions of the machine ca.: 12 x 10 x 8 m. grinding wheel diam. min/max.: 420-610 grinding wheel diameter - width-internal grin: 304,8 x 500 mm Ihodpot Uw Avjfx Abcow Regulatin wheel diameter min/max.: 300-350 mm The machine is currently designed for plunge grinding JUPITER's Centerless grinding, also available with CBN. Junker this circular grinding method with CBN grinding wheels, which opens up significant productivity benefits from the long service life of the grinding wheel, especially at high volumes. In addition, the simultaneous removal takes on the entire Schleswig-Holstein, which provides both in mass production and in small batches for significantly reduced processing times. The grinding process with JUPITER When centerless grinding, there are two grinding processes: the through grinding and plunge. Both methods are possible with the JUPITER. Applications through grinding: Pin and Bushings Body, rings, smaller rings, piston parts (eg compressors), waves with constant diameter piston rods (eg shock), Small piston for hydraulic and fuel injection, precision wires and rods, piston pins. Applications Plunge: Rotor shafts, transmission parts, bearing surfaces of camshafts, tube and pipe fittings for composite camshafts, universal joints, parts for needle injection, valve stems, barrel rolls. *

Condition: excellent (used), Year of construction: 2021, functionality: fully functional, machine/vehicle number: MC0629, MACHINE SPECIFICATION Height of centres 230mm Swing over bed 460mm Swing over cross slide 270mm Swing in gap 730mm Width in front of faceplate 216mm Bed length between centres 1500mm Spindle speeds (infinitely variable) 20-2000rpm Spindle nose mounting (Camlock) D1-8 Spindle bore 76mm Taper in nose bush No. 5MT Width over bedways 400mm Travel f cross slide 300mm Travel of top slide 150mm Taper of tailstock barrel 145mm Tailstock in tailstock barrel No.6MT Approx. weight 2980Kg Machine in Metric execution MACHINE EQUIPPED WITH Acu-Rite 2 axis DRO System 3 Jaw chuck Quick change toolpost and 5-off toolholders Ijdpfxsyn Eu Io Abcehw Lighting Chuck guard Coolant system Rear splashguard

Condition: used, Year of construction: 2016, operating hours: 29,600 h, functionality: fully functional, clamping force: 2,000 kN, screw diameter: 50 mm, clearance between the columns: 530 mm, displacement volume: 412 cm³, injection pressure: 1,820 bar, injection weight: 375 g, mold height (min.): 200 mm, ejector force: 62,000 N, ejector stroke: 140 mm, opening stroke: 490 mm, installation height: 550 mm, total length: 6,000 mm, total width: 1,530 mm, overall weight: 7,100 kg, heating capacity: 18 kW (24.47 HP), pump power: 18,500 W, We are offering this used Haitian MARS II 2000-750eco injection moulding machine, year of manufacture 2016. Operating hours: 29,600 Equipment: Energy-saving servo-hydraulics Iedpfx Absymcglocjhw 2 x hydraulic core pull 2 x air valve Euromap 67 interface for robots Newly installed, hardened screw and barrel unit with 50mm screw Controller: KEBA 1075 keypad control If you have any questions or require further information, please feel free to send us a message or call us.

Condition: ready for operation (used), Year of construction: 2006, operating hours: 30,000 h, functionality: fully functional, clamping force: 8,000 kN, screw diameter: 95 mm, displacement volume: 3,367 cm³, Clamping force 8000 kN Mould opening force, max. 560 kN Travel force movable platen opening 89 kN Travel force movable platen closing 92 kN Size of mould platens (h x v) 1600 x 1550 mm Distance between tie bars (h x v) 1120 x 1000 mm Ihsdjymn Rvjpfx Abcow Mould opening stroke 1600 mm Mould height min/max 500/1100 mm Max. daylight 2100 mm Hydraulic ejector - stroke 300 mm Ejector force 200/100 kN Injection unit: Screw diameter 95 mm Ls/D ratio 23 Injection pressure 1795 bar Stroke volume 3367 ccm Shot weight (PS) 3064 gr. Injection rate 690 ccm/s Screw speed 116 1/min Plasticising rate max. 104 g/s Nozzle pressure 166 kN Electric and Hydraulic Equipment: Nominal capacity of pump motor 90 kW Installed heating capacity 53 kW Adjustable barrel heating zones 7 Oil Reservoir capacity 1500 ltr. Dimensions and weights: Dimensions of the machine ca. 11,00 x 3,00 x 2,60 m Total machine weight 44500 kg Max. mould weight 12200 kg Accessories: - Anti vibration pads Additional Options: - 1 x air valve - tiebar pull system - 3 x core pulls on movable plate - 2 x core pulls on fix plate - 20 x hot runner controller - Robot interface according to Euromap 67

Condition: ready for operation (used), Year of construction: 2006, operating hours: 50,000 h, functionality: fully functional, clamping force: 8,000 kN, screw diameter: 95 mm, displacement volume: 3,367 cm³, Clamping force 8000 kN Mould opening force, max. 560 kN Travel force movable platen opening 89 kN Travel force movable platen closing 92 kN Size of mould platens (h x v) 1600 x 1550 mm Isdpfx Aeymn Nfjbcohw Distance between tie bars (h x v) 1120 x 1000 mm Mould opening stroke 1600 mm Mould height min/max 500/1100 mm Max. daylight 2100 mm Hydraulic ejector - stroke 300 mm Ejector force 200/100 kN Injection unit: Screw diameter 95 mm Ls/D ratio 23 Injection pressure 1795 bar Stroke volume 3367 ccm Shot weight (PS) 3064 gr. Injection rate 690 ccm/s Screw speed 116 1/min Plasticising rate max. 104 g/s Nozzle pressure 166 kN Electric and Hydraulic Equipment: Nominal capacity of pump motor 90 kW Installed heating capacity 53 kW Adjustable barrel heating zones 7 Oil Reservoir capacity 1500 ltr. Dimensions and weights: Dimensions of the machine ca. 11,00 x 3,00 x 2,60 m Total machine weight 44500 kg Max. mould weight 12200 kg Accessories: - Anti vibration pads Additional Options: - 1 x air valve - tiebar pull system - 3 x core pulls on movable plate - 2 x core pulls on fix plate - 20 x hot runner controller - Robot interface according to Euromap 67

Condition: excellent (used), Year of construction: 2001, Directly from toolmaking: ARBURG 220 S 150-30 – Year of manufacture 2001 approx. 46,000 operating hours, screw/barrel Ø18 mm, CF card reader Ihsdpfjyl Syrsx Abcow very compact, ideal for small parts, minimal footprint: 2.10 m x 0.80 m, can be inspected in operation, ex works, free on truck. Without peripherals: dryer, hopper, GEIGER MiniServo sprue picker possible at extra charge

Condition: ready for operation (used), Year of construction: 2013, functionality: fully functional, machine/vehicle number: 11322 - 6759.470QC6, load capacity: 15 kg, arm reach: 1,700 mm, controller manufacturer: CLOOS, controller model: QIROX C, teach pendant manufacturer: CLOOS, input voltage: 400 V, input current: 44 A, type of input current: AC, • Year 2013 • Ready to weld Aluminium and Steel • Model QRC 350 QIROX • Control cabinet QIROX C – QRC 350 • Linear track of 15 m • Laser camera POWER CAM of SERVO MOTOR CANADA • Touch sensor Quinto Ijdewcyffspfx Abcohw • Arc sensor • Wire Barrel • Wire drive unit CK 118 R K CDD • Welding torch MRW 500-35°-78/273 • CDD CLOOS DUO DRIVE • Welding machine QINEO PULSE 450 GLC 403 Quinto II with external cooling (Hot Countries) • Torch clean CMR 7 C DA with wire cutter

Condition: excellent (used), Year of construction: 2003, KRAUSS MAFFEI KM 4000-24500 MC Injection Moulding Machine _____ Basic Information • Year of manufacture: 2003 • Control system: MC4 • Software languages: Swedish, German, English _____ Clamping Unit • Clamping force: 40,000 kN • Mold opening force: 2,525 kN • Platen dimensions (H × V): 3315 × 2920 mm • Tie bar clearance (H × V): 2240 × 1800 mm • Mold opening stroke: 3,100 mm Ihjdjyifg Dspfx Abcew • Min./max. mold height: 1,100 – 2,000 mm • Maximum daylight: 4,200 mm • Ejector stroke: 350 mm • Ejector force (front/rear): 772 / 368 kN _____ Injection Unit (HPS-AT) • Screw diameter: 150 mm • L/D ratio: 23 • Maximum injection pressure: 1,843 bar • Injection volume: 13,254 cm³ • Shot weight (PS): 12,061 g • Injection rate: 1,431 cm³/s • Plasticizing capacity: 266 g/s _____ Electro-Hydraulic System • Hydraulic pump motor power: 200 kW • Installed heater power: 159 kW • Number of barrel heating zones: 7 • Dry cycle time (Euromap 6): 270 cycles/h • Hydraulic oil tank capacity: 2,700 l _____ Machine Dimensions and Weight • Machine dimensions (L × W × H): 17.3 × 4.9 × 3.74 m • Machine weight: 247 t • Maximum mold weight: 90,000 kg

Condition: used, Demag Ergotech 3300-840, Demag injection molding machine, used machine Manufacturer : Demag, Sumitomo Model: Ergotech 3300-840 Overall dimensions : Length x Width x Height: 6.5 x 2.0 x 2.2 meters Net weight (without oil): 13 800 kg TECHNICAL DATA (BY SCREW DIAMETER) ----- Description Unit "A" "B" "C" ----- Screw diameter: [mm] 45 50 60 L/D ratio: [-] 20 20 20 Injection pressure (at 400 °C): [bar] 2402 1946 1351 Shot volume: [cm3] 358 442 636 Shot weight (PS): [g] 320 400 570 Barrel heating power: [kW] 13.0 14.8 23.1 Installed electrical power*: [kW] 58/68 60/70 68/78 ----- * Note: Values are higher with electric screw drive (WA). Iedpox Sqi Hjfx Abcehw INJECTION UNIT FEATURES ----- Max. dosing stroke: 225 mm Max. nozzle retraction: 470 mm Nozzle immersion depth: 40 mm (SVO) / 30 mm (SPI) Nozzle contact force: 80 kN Electric screw drive (WA): 20.5 kW Material hopper capacity: 75 liters GENERAL AND HYDRAULIC DATA ----- Hydraulic oil tank capacity: 700 liters Pump unit power: 45 / 55 kW Dry cycle (EUROMAP 6a): 1440 / 1600 h-1 Dry cycle (without nozzle movement): 1890 / 2100 h-1 Continuous noise level: 74 dB (A)

Condition: good (used), Year of construction: 2004, functionality: fully functional, machine/vehicle number: 2812, input voltage: 420 V, total length: 5,890 mm, total width: 1,000 mm, total height: 1,930 mm, compressed air connection: 6 bar, type of input current: three-phase, power: 8.5 kW (11.56 HP), GPE/24 machine for printing oc cylindrical objects like little tubes, barrels and round pens. Loading hopper, to provide the filling the chain transport system. Chain transport system with V shaped links to hold the product with diameter up to 14/20 mm and parallel transport chaine may be adjusted a maximum lenght of 140 mm. System that controls the rotation of product. One colour printing - no registration. Or with register system for the pens with clip. Drying tunnel 140 cm long with warm air blower. After drying are the final cooling fan. Ihodpfxsyq Nmmo Abcew

Condition: used, Year of construction: 2019, Overview This complete brewhouse including fermentation and storage cellar and KEG filling was installed in 2019 and largely built by the Chinese manufacturer Shandong Yuesheng. The scope of delivery includes various equipment necessary for operation. The brewhouse will become vacant as the previous owner is closing the brewery due to retirement. The brewery ran smoothly until the end. The equipment is still set up and connected and can be viewed in person at any time. Scope of delivery 4 units Brewhouse | Shandong | 20-25HL | 2019 1x mash tun 1x lauter tun 1x boiling or wort tun 1x whirlpool Manual shut-off valves Cooling of fermentation tanks is automated Malt mill | Shandong | 2019 Steam generator | Yano (Shanghai Yano Boiler Manufacturing Co. Ltd) | 2019 200 kg/ h Oil-fired, but can also be operated with gas by replacing the burner Wort cooler, 2-stage | Shandong | 2019 2x cooling unit (glycol) | 2019 2x 28kW Glycol tank Hot water tank 6x Fermentation tanks | 2760l | 2019 3 bar, insulated with jacket cooling, CIP capable 12x Storage tank | 2760l | 2019 3 bar, no cooling, were in a separate cold room Reverse osmosis Compressor | JAN | 585l/ min | 2020 KEG filling 1x drum washer with automatic caustic refill and steam-heated 1x keg filler Up to 70 barrels/ h, Fitting: Type S, basket fitting, Siemens S7 Dismantling and loading are included in the price Also available for purchase: refrigerated containers, dispensing systems, KEG kegs, etc. Ihedpjyb N N Aofx Abcow

Condition: used, functionality: fully functional, empty load weight: 6,710 kg, maximum load weight: 29,290 kg, overall weight: 36,000 kg, axle configuration: 3 axles, first registration: 10/2022, next inspection (TÜV): 11/2026, loading space length: 13,620 mm, loading space width: 2,470 mm, loading space height: 2,720 mm, loading space volume: 91 m³, suspension: air, tire size: 385/65 R 22,5, color: grey, Year of construction: 2022, Equipment: ABS, Object number #30753 Load securing certificate EN 12642 XL Load securing certificate DCE 9.5 Beverage certificate incl. barrel containers Kögel axles Lifting axle Aluminum rims Disc brakes Tyres 385/65 R 22.5 Body internal dimensions: 13,620 x 2,470 x 2,720 mm Side through-loading: 2,630 mm Pallet box Portal doors Double interior locking rods Sliding curtain Ihsdeykt E Hepfx Abcow Sliding roof Pallet stoppers on both sides Perforated outer frame 13 pairs of lashing rings ABS/EBS Raise/lower function Kögel landing legs Work lights Forklift accessible – 7,200 kg Interior lighting Prepared for reversing camera Leasing or financing available on request!!